The effect of microplastics on behaviors of chiral imidazolinone herbicides in the aquatic environment: Residue, degradation and distribution

Efficient magnetic capture of PE microplastic from water by PEG modified Fe3O4 nanoparticles: Performance, kinetics, isotherms and influence factors

Due to their resistance to degradation, wide distribution, easy diffusion and potential uptake by organisms, microplastics (MPs) pollution has become a major environmental concern. In this study, PEG-modified Fe3O4 magnetic nanoparticles demonstrated superior adsorption efficiency against polyethylene (PE) microspheres compared to other adsorbents (bare Fe3O4, PEI/Fe3O4 and CA/Fe3O4). The maximum adsorption capacity of PE was found to be 2203 mg/g by adsorption isotherm analysis. PEG/Fe3O4 maintained a high adsorption capacity even at low temperature (5°C, 2163 mg/g), while neutral pH was favorable for MP adsorption. The presence of anions (Cl-, SO42-, HCO3-, NO3-) and of humic acids inhibited the adsorption of MPs. It is proposed that the adsorption process was mainly driven by intermolecular hydrogen bonding. Overall, the study demonstrated that PEG/Fe3O4 can potentially be used as an efficient control against MPs, thus improving the quality of the aquatic environment and of our water resources.

Modeling the spatiotemporal distribution, bioaccumulation, and ecological risk assessment of microplastics in aquatic ecosystems: A review

Microplastic (MP) pollution poses a significant threat to aquatic ecosystems. Numerical modeling has emerged as an effective tool for predicting the distribution, accumulation, and risk assessment of MPs in aquatic ecosystems. However, published work has not systematically assessed the strengths and weaknesses of various modeling approaches. Therefore, we conducted a thorough review of the main modeling approaches for MPs over the past six years. We classified the approaches into three categories as: spatial and temporal distribution, bioaccumulation, and systematic ecological risk assessment. The review analyzed application scenarios, modeling methods, and the advantages and disadvantages of models. The results indicate that the accurate simulation of MPs spatial and temporal distribution requires reasonable parameterization and comprehensive transport considerations. Meanwhile, it is important to focus on coupling process models with other types of models. To enhance risk assessment models, expanding the relevant evaluation indicators is essential.

Effect of microplastic on sorption, toxicity, and mineralization of 2,4-dichlorophenoxyacetic acid ionic liquids

Recently, there has been significant focus on microplastics in the environment, especially regarding their role in sorption-desorption processes of emerging contaminants, impacting pollutant migration between aquatic and terrestrial ecosystems. Notably, the newest pollutants in such environments are the herbicide formulations known as ionic liquids (ILs), which integrate the structure of classic herbicidal anion with surface-active cations acting as an adjuvant. In our study, we synthesized herbicidal ILs by combining 2,4-D anion with cetyltrimethylammonium [CTA] and didecyldimethylammonium [DDA] cations. We investigated whether ILs and the mixture of salts, when exposed to polyethylene (PE) microplastics, differ in properties. We analyzed their sorption on defined PE particles, evaluated toxicity on Pseudomonas putida KT2440 using trans/cis ratio of unsaturated fatty acids, and assessed biodegradability with OECD 301F standard test. Results indicate IL cations and anions behave as distinct entities, questioning IL synthesis feasibility. Hydrophobic adjuvants were found to adsorb onto PE microplastic surfaces (5-60% [CTA] > [DDA]), posing potential threats of surface-active xenobiotic accumulation. This highlights the need to explore microplastics' role as sorbents of hazardous adjuvants in agriculture, potentially competing with humic acids and affecting xenobiotic bioavailability. Consequently, xenobiotics may persist longer in the environment, facilitated by microplastic mobility between aquatic and terrestrial ecosystems. KEY POINTS: • Microplastics act as sorbents, accumulating xenobiotics and limiting biodegradation. • Sorption of surfactant cations on microplastics reduces soil bacteria toxicity. • Research confirms independent action of ions from ionic liquids in the environment.

Unveiling the ecotoxicological impact of microplastics on organisms - the persistent organic pollutant (POP): A comprehensive review

Microplastics have been ubiquitous in our environment for decades, and numerous studies have revealed their extensive dispersion, reaching far beyond the surface of the land, soil, aquatic ecosystems. They have infiltrated the food-chain, the food web, even the air we breathe, as well as the water we drink. Microplastics have been detected in the food we consume, acting as vectors for hazardous chemicals that adhere to their hydrophobic surfaces. This can result in the transfer of these chemicals to the aquatic life, posing a threat to their well-being. The release of microplastics into different environmental settings can give rise to various eco-toxicological implications. The substantial body of literature has led scientists to the consensus that microplastic pollution is a global problem with the potential to impact virtually any type of ecosystem. This paper aims to discuss crucial information regarding the occurrence, accumulation, and ecological effects of microplastics on organisms. It also highlights the new and emerging disease named "Plasticosis" that is directly linked to microplastics and its toxicological effects like permanent scarring and long-term inflammation in the digestive system of the seabirds. By comprehending the behaviour of these microplastic pollutants in diverse habitats and evaluating their ecological consequences, it becomes possible to facilitate a better understanding of this toxicological issue.

Transport of polyethylene and polypropylene microplastics under the action of agricultural chemicals: Role of pesticide adjuvants and neonicotinoid active ingredients

Understanding the impact of various agricultural chemical components on the fate and transport of microplastics (MPs) in the subsurface is essential. In this study, column experiments on saturated porous media were conducted to explore the influence of the coexistence environment of pesticide adjuvants (surfactants) and active ingredients (neonicotinoids) on the transport of polyethylene (PE) and polypropylene (PP) MPs. An anionic surfactant (sodium dodecyl sulfate (SDS)), a nonionic surfactant (nonylphenol ethoxylate (NP-40)), and three neonicotinoid insecticides (acetamiprid, dinotefuran, and nitenpyram) could independently increase MP migration by 9.31%-61.01% by improving the hydrophilicity. Acetamiprid or dinotefuran reduced the adhesion work of the binary system by competing with SDS for adsorption sites, thereby inhibiting PE mobility. However, nitenpyram in the mixture was not easily adsorbed on the surface of PE MPs together with SDS because of nitenpyram's high hydrophilicity. Neonicotinoid molecules could not reduce the hydrophilic modification of SDS on PP MPs by competing for adsorption sites. Owing to their weak charge and adhesion work of nonionic surfactants (-4.80 mV and 28.45 kT for PE and -8.21 mV and 17.64 kT for PP), neonicotinoids tended to occupy the adsorption sites originally belonging to NP-40. The long molecular chain of NP-40 made it difficult for high-concentration neonicotinoids to affect the adhesion on MPs. In addition, NP-40 was harder to peel off from the MP surface than SDS, leading to a larger MP transport ability in the sand column.

Research on aquatic microcosm: Bibliometric analysis, toxicity comparison and model prediction

Recently, aquatic microcosms have attracted considerable attention because they can be used to simulate natural aquatic ecosystems. First, to evaluate the development of trends, hotspots, and national cooperation networks in the field, bibliometric analysis was performed based on 1841 articles on aquatic microcosm (1962-2022). The results of the bibliometric analysis can be categorized as follows: (1) Aquatic microcosm research can be summarized in two sections, with the first part focusing on the ecological processes and services of aquatic ecosystems, and the second focusing on the toxicity and degradation of pollutants. (2) The United States (number of publications: 541, proportion: 29.5%) and China (248, 13.5%) are the two most active countries. Second, to determine whether there is a difference between single-species and microcosm tests, that is, to perform different-tier assessments, the recommended aquatic safety thresholds in risk assessment [i.e., the community-level no effect concentration (NOECcommunity), hazardous concentrations for 5% of species (HC5) and predicted no effect concentration (PNEC)] were compared based on these tests. There was a significant difference between the NOECcommunity and HC5 (P < 0.05). Moreover, regression models predicting microcosm toxicity values were constructed to provide a reference for ecological systemic risk assessments based on aquatic microcosms.

Analysis of photocatalytic degradation of polyamide microplastics in metal salt solution by high resolution mass spectrometry

Microplastic pollution has become one of the most concerned focuses in the world. Among many treatment methods, photocatalysis is considered to be one of the most environmentally friendly methods. In this work, the photodegradation behavior of polyamide microplastics is studied by using polyamide 6 PA6) as model microplastics and FeCl3 as catalyst. It is hoped that the PA6 fiber can be effectively degraded by utilizing the strong oxidizing active species that can be produced after FeCl3 is irradiated in water. The results shows that PA6 fiber can be almost completely degraded after 10 days of irradiation in FeCl3 aqueous solution, indicating that it is promising to use this new method to solve the problem of PA6 type microplastics. In addition, the chain scission mechanism and degradation process of PA6 are analyzed in detail by ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS), which provides a new insight for the study of polymer degradation mechanism.

Adsorption properties and mechanism of Cu(II) on virgin and aged microplastics in the aquatic environment

Microplastics (MPs) migrate by adsorbing heavy metals in aquatic environments and act as their carriers. However, the aging mechanisms of MPs in the environment and the interactions between MPs and heavy metals in aquatic environments require further study. In this study, two kinds of materials, polyamide (PA) and polylactic acid (PLA) were used as target MPs, and the effects of UV irradiation on the physical and chemical properties of the MPs and the adsorption behavior of Cu(II) were investigated. The results showed that after UV irradiation, pits, folds and pores appeared on the surface of aged MPs, the specific surface area (SSA) increased, the content of oxygen-containing functional groups increased, and the crystallinity decreased. These changes enhanced the adsorption capacity of aged MPs for Cu(II) pollutants. The adsorption behavior of the PA and PLA MPs for Cu(II) conformed to the pseudo-second-order model and Langmuir isotherm model, indicating that the monolayer chemical adsorption was dominant. The maximum amounts of aged PA and PLA reached 1.415 and 1.398 mg/g, respectively, which were 1.59 and 1.76 times of virgin MPs, respectively. The effects of pH and salinity on the adsorption of Cu(II) by the MPs were significant. Moreover, factors such as pH, salinity and dosage had significant effects on the adsorption of Cu(II) by MPs. Oxidative complexation between the oxygen-containing groups of the MPs and Cu(II) is an important adsorption mechanism. These findings reveal that the UV irradiation aging of MPs can enhance the adsorption of Cu(II) and increase their role as pollutant carriers, which is crucial for assessing the ecological risk of MPs and heavy metals coexisting in aquatic environments.

Coinoculation of arbuscular mycorrhizal fungi and rhizobia stimulates atrazine dissipation by changing the atrazine-degrading bacterial community at the soil aggregate scale

As a potential low-cost and environmentally friendly strategy, bioremediation of herbicide polluted soil has attracted increasing attention. However, there is a lack of knowledge regarding the response of the atrazine-degrading bacterial community to coinoculation of arbuscular mycorrhizal (AM) fungi and rhizobia for atrazine dissipation. In this study, a pot experiment was conducted with AM fungi Glomus mosseae (AM), rhizobia Rhizobium trifolii TA-1 (R) and their coinoculation (AMR) with atrazine. In each treatment, the atrazine-degrading bacterial community of four soil size aggregates, namely large macroaggregates (LMa), small macroaggregates (SMa), microaggregates (Mia) and primary particles (P) were investigated. The results showed that the atrazine residue concentration was lowest in AMR, and that in LMa was also significantly lower than that in the other smaller aggregate sizes. Overall, inoculation, the aggregate fraction and their interaction had significant effects on soil TN, SOC, AP and pH. For the atrazine-degrading bacterial community, the Chao1 index increased with decreasing particle size, but the Shannon index decreased. Moreover, the abundances of the dominant atrazine-degrading bacterial genera Arthrobacter, Bacillus, Marmoricola and Nocardioides in the Mia and P particle size groups were greater than those in the LMa and SMa groups in each treatment. The bacterial communities in the Mia and P particle sizes in each treatment group were more complex. Therefore, coinoculation of AM fungi and rhizobia stimulated atrazine dissipation by changing the atrazine-degrading bacterial community, and the response of the atrazine-degrading bacterial community to each aggregate size varied depending on its distinct soil physicochemical properties.

Effects of microplastics on the environmental behaviors of the herbicide atrazine in soil: Dissipation, adsorption, and bioconcentration

As an emerging contaminant in soil, the impact of microplastics (MPs) on the environmental behavior of other organic pollutants remains uncertain, potentially threatening the sustainability of agricultural production. In this study, the impact of two kinds of MPs on the environmental behaviors of herbicide atrazine in soil-plant system was investigated. The results showed that MPs significantly reduced the half-life 17.69 ∼ 21.86 days of atrazine in the soil, compared to the control group. Meanwhile, the introduction of MPs substantially increased atrazine adsorption. Additionally, MPs substantially enriched the diversity and functionality of soil microbiome, and the soil metabolic activity was stimulated. Regarding the crop growth, the accumulation of atrazine in maize were significantly decreased by approximately 48.4-78.5 % after exposure to MPs. In conclusion, this study reveals the impact of MPs on atrazine's environmental behaviors in soil and highlights their less effect on maize growth, providing valuable insights for managing MPs contamination in sustainable agriculture.

Insight into microplastics in the aquatic ecosystem: Properties, sources, threats and mitigation strategies

Globally recognized as emergent contaminants, microplastics (MPs) are prevalent in aquaculture habitats and subject to intense management. Aquaculture systems are at risk of microplastic contamination due to various channels, which worsens the worldwide microplastic pollution problem. Organic contaminants in the environment can be absorbed by and interact with microplastic, increasing their toxicity and making treatment more challenging. There are two primary sources of microplastics: (1) the direct release of primary microplastics and (2) the fragmentation of plastic materials resulting in secondary microplastics. Freshwater, atmospheric and marine environments are also responsible for the successful migration of microplastics. Until now, microplastic pollution and its effects on aquaculture habitats remain insufficient. This article aims to provide a comprehensive review of the impact of microplastics on aquatic ecosystems. It highlights the sources and distribution of microplastics, their physical and chemical properties, and the potential ecological consequences they pose to marine and freshwater environments. The paper also examines the current scientific knowledge on the mechanisms by which microplastics affect aquatic organisms and ecosystems. By synthesizing existing research, this review underscores the urgent need for effective mitigation strategies and further investigation to safeguard the health and sustainability of aquatic ecosystems.

Microbial community structure and co-occurrence network stability in seawater and microplastic biofilms under prometryn pollution in marine ecosystems

Prometryn has been extensively detected in marine environment because of its widespread usage in agriculture and aquaculture and has been concerns since its serious effects on aquatic organisms. However, its impact on the microbial community in the marine ecosystem including seawater and biofilm is still unclear. Therefore, a short-term indoor microcosm experiment of prometryn exposure was conducted. This study found that prometryn had a more significant impact on the structure and stability of the microbial community in seawater compared to microplastic biofilms. Additionally, we observed that the assembly of the microbial community in biofilms was more affected by stochastic processes than in seawater under the exposure of prometryn. Our study provided evidence for the increasing impact of the microbial communities under the stress of prometryn and microplastics.

Residue behaviors, degradation, processing factors, and risk assessment of pesticides in citrus from field to product processing

Pesticide residues in citrus may cause health risks in related juice products, and bring much uncertainty during the processing procedures. In this study, based on the dispersive solid-phase extraction (d-SPE) and UPLC-MS/MS, the residual levels of ten analytes in citrus and its processed products were monitored. The results showed that dissipation of the pesticides followed the first-order kinetics and the half-lives in citrus varied greatly, ranging from 6.36 to 63.0 days. The terminal residues of the five pesticides at harvest time were <0.01-0.302 and <0.01-0.124 mg/kg in raw citrus and citrus flesh, respectively, all of which were lower than the corresponding maximum residue limits (MRLs) of 0.5-1 mg/kg. In the processing experiments, the residues of ten analytes in sterilized juice, concentrated juice, and citrus essential oil were in the range of <0.01 to 0.442 mg/kg, <0.01 to 1.16 mg/kg, and <0.01 to 44.0 mg/kg, respectively, and the corresponding processing factors (PFs) were 0.127-1.00, 0.023-3.06, and 0.006-39.2. Particularly, in citrus essential oil, the PFs of etoxazole, fluazinam, lufenuron and spirotetramat-keto-hydroxy were 1.68-39.2, exhibiting obvious enrichment effects. By integrating the residue data of the field trials and the PFs, the acute and chronic dietary risks of the target pesticides in citrus juice were 0.031-1.83 % and 0.002-2.51 %, respectively, which were far lower than 100 %, demonstrating no unacceptable risk to human health. This work provides basic data for the establishment of the MRLs and dietary exposure risk assessment for processed citrus products.

Insight into the effect of microplastics on the adsorption and degradation behavior of thiamethoxam in agricultural soils

Thiamethoxam and microplastics are both common pollutants in farmland soil; however, few studies have focused on the interaction between thiamethoxam and microplastics in soil. Here, a batch experiment and soil incubation experiment were performed to explore the mechanism and effects of microplastics on the adsorption and degradation behaviors of thiamethoxam in soil, respectively. First, the batch experimental results indicated that the adsorption process of thiamethoxam on the microplastic/soil mixtures and soil-only systems mainly relies on chemical interactions. All sorption processes had moderate intensities of adsorption, and the sorption process occurred on the heterogeneous surface. In addition, the particle size and dose of microplastics could both affect the adsorption behavior of thiamethoxam onto microplastics/soil systems. The sorption capacity of thiamethoxam in soil decreases as the particle size of microplastics increases, but the sorption capacity increases as the dose of microplastics increases. Second, the results of the soil incubation experiment showed that the half-lives of thiamethoxam ranged from 57.7 d to 86.6 d, from 86.6 d to 173.3 d, and 115 d in the biodegradable microplastic/soil systems, nondegradable microplastic/soil systems, soil-only systems, respectively. These results indicate that biodegradable microplastics promoted the degradation of thiamethoxam, while nondegradable microplastics delayed the degradation process of thiamethoxam in soil. Overall, microplastics could change the degradation behaviors, sorption capacity and adsorption efficiency, and then affect the mobility and persistence of thiamethoxam in the soil environment. These findings contribute to understanding the influence of microplastics on the environmental fate of pesticides in the soil environment.

Aging of biodegradable-mulch-derived microplastics reduces their sorption capacity of atrazine

Degradable plastics are gradually regarded as alternatives of conventional, synthetic organic polymers to reduce the plastics or microplastics (MPs) pollution; however, the reports upon environmental risk of degradable plastics are still limited. In order to evaluate the potential vector effect of biodegradable MPs on coexisting contaminants, sorption of atrazine onto pristine and ultraviolet-aged (UV) polybutylene adipate co-terephthalate (PBAT) MPs and polybutylene succinate co-terephthalate (PBST) MPs were investigated. The results showed that, UV aging led to more wrinkles and cracks on the surface, increased homogeneous chains proportion, enhanced hydrophobicity, and enlarged crystallinity of both MPs. The sorption kinetics of atrazine to MPs fitted well into pseudo-first-order (R² = 0.809-0.996) and pseudo-second-order (R² = 0.889-0.994) models. In the concentration range of 0.5-25 mg L^-1, the sorption isotherm fitted into linear (R² = 0.967-0.996) and Freundlich model (R² = 0.972-0.997), indicating that the absorption partitioning was the dominant sorption mechanism. The partition coefficient (K_d) of atrazine to PBAT- MPs (40.11-66.01 L kg^-1) was higher than that of PBST- MPs (34.34-57.96 L kg^-1), and the K_d values of both MPs declined for aged MPs. The specific surface area, hydrophobicity, polarity and crystallinity of MPs jointly interpreted the changing sorption capacity of the MPs. In the present study, both aged PBAT- and aged PBST- MPs exhibited lower vector potential to atrazine than pristine MPs, suggesting reduced risk of being a pollutant carrier, which is of great significance for the development of biodegradable plastics.

Modification of sedimentation and bioaccumulation behavior as an efficient strategy to modulate the toxicity of pyraclostrobin to zebrafish (Danio rerio)

The behavior of pesticide particles or droplets might significantly influence their environmental risks. However, studies on the risk of different pesticide formulations in aqueous environments have rarely been reported. In this study, we prepared three types of pyraclostrobin formulations to evaluate their behavior in the aqueous environment and toxicological risks to zebrafish. The results showed that pyraclostrobin emulsifiable concentrate (EC) sank faster in water with increasing hydrophilicity and density of the solvent. The particles also sank faster with increasing particle size and particle density for suspension concentrate (SC) and microcapsules (MCs). Diverse behavior in water results in different temporal and spatial distributions of the active ingredient. EC-EGDA, SC-5 μm, CS-Large and EC-MO sink or float over time, therefore reducing the effective dose suspended in water. Lower toxicological risks of the pesticides were also observed by reducing the enrichment of pyraclostrobin in zebrafish. In addition to the direct toxicity of the active ingredient, the type of pesticide formulations and their specific compositions might also influence the integrated toxicity. The environmental behavior of pesticide formulations should also be considered for their systematic assessment of environmental risks to ensure the scientific application of pesticides in different scenarios.

In situ degradation of low-density polyethylene film in irrigation maize field: Thickness-dependent effect

Thickness of low-density polyethylene (LDPE) film might determine its mechanical strength, clean production and soil health. Yet, this issue is little understood. In situ aging effects were evaluated in LDPE films with the thickness of 0.006 mm, 0.008 mm, 0.010 mm and 0.015 mm in maize field. The data showed that maximum tensile force (TFmax), maximum tensile strength (TSmax) and elongation at break (EAB) were massively lowered with increasing thickness after aging. The greatest and lowest reduction magnitude of EAB was 27.6 % and 11.2 % in 0.006 mm and 0.015 mm films respectively. Also, the melting point (Tm) and crystallinity (Xc) under Differential Scanning Calorimeter (DSC) tended to decline with the increasing thickness. Moreover, the peak intensity of crystalline regions tended to transfer and concentrate on the amorphous regions, and such tendency became more pronounced in the thin films. Interestingly, there existed a pronounced distinct thickness-dependent effects on soil bulk density (SBD) and soil water-stable aggregate proportion. Thick plastic film mulching increased SBD but reduced the proportion of macroaggregates (mainly referred to 0.015 mm and 0.010 mm). In addition, thick film mulching slightly reduced the levels of soil organic carbon (SOC) and total nitrogen (TN), but significantly promoted the contents of soil labile C and N. Particularly, it significantly promoted above- & under-ground biomass of maize across two growing seasons (p < 0.05). To sum up, thickening LDPE film may act as a promising solution to improve LDPE film residue recycling, while benefiting for higher productivity. However, thick film mulching may cause a certain adverse impact on soil structure, and further investigations would be needed in the future.

Microplastics mulch film affects the environmental behavior of adsorption and degradation of pesticide residues in soil

Plastic pollution in the soil ecosystem is currently receiving worldwide attention. However, little is known whether the presence of microplastics (MPs) in soil will affect the environmental behavior of pesticide residues in soil. Here, the effect of the addition of new mulch MPs (New-MPs), aged mulch MPs (Aged-MPs) and biodegradable mulch MPs (BioD-MPs) on the adsorption and degradation behaviors of two pesticides (imidacloprid and flumioxazin) in soil was investigated. Three MPs slowed down rapid adsorption stage of pesticides in soil and delayed the time to reach adsorption equilibrium. Adsorption rates: Soil > Soil + New-MPs > Soil + Aged-MPs > Soil + BioD-MPs. Three MPs enhanced the adsorption strength of the soil system for the two pesticides, and the aging treatment of the MPs enhanced this effect. Three MPs affected the degradation process of the two pesticides. New-MPs promoted the degradation of two pesticides imidacloprid and flumioxazin, and the degradation half-lives were shortened to 0.93 and 0.85 times, respectively; while Aged-Mps and BioD-MPs delayed the degradation process of two pesticides, and the degradation half-lives were extended to 1.64 times and 1.21 times, respectively. The effect was more significant with the increase of MPs and pesticides concentration. Pesticide polarity, surface structure and functional groups of MPs are potentially important reasons for the differences in adsorption and degradation of MPs-soil systems. Our findings provide a deep insight into understanding the mechanism of interaction between MPs and pesticide residues in soil environment.

Recognition in the Domain of Molecular Chirality: From Noncovalent Interactions to Separation of Enantiomers

It is not a coincidence that both chirality and noncovalent interactions are ubiquitous in nature and synthetic molecular systems. Noncovalent interactivity between chiral molecules underlies enantioselective recognition as a fundamental phenomenon regulating life and human activities. Thus, noncovalent interactions represent the narrative thread of a fascinating story which goes across several disciplines of medical, chemical, physical, biological, and other natural sciences. This review has been conceived with the awareness that a modern attitude toward molecular chirality and its consequences needs to be founded on multidisciplinary approaches to disclose the molecular basis of essential enantioselective phenomena in the domain of chemical, physical, and life sciences. With the primary aim of discussing this topic in an integrated way, a comprehensive pool of rational and systematic multidisciplinary information is provided, which concerns the fundamentals of chirality, a description of noncovalent interactions, and their implications in enantioselective processes occurring in different contexts. A specific focus is devoted to enantioselection in chromatography and electromigration techniques because of their unique feature as "multistep" processes. A second motivation for writing this review is to make a clear statement about the state of the art, the tools we have at our disposal, and what is still missing to fully understand the mechanisms underlying enantioselective recognition.

Microplastic Pollution Focused on Sources, Distribution, Contaminant Interactions, Analytical Methods, and Wastewater Removal Strategies: A Review

Plastics have been one of the most useful materials in the world, due to their distinguishing characteristics: light weight, strength, flexibility, and good durability. In recent years, the growing consumption of plastics in industries and domestic applications has revealed a serious problem in plastic waste treatments. Pollution by microplastics has been recognized as a serious threat since it may contaminate all ecosystems, including oceans, terrestrial compartments, and the atmosphere. This micropollutant is spread in all types of environments and is serving as a "minor but efficient" vector for carrier contaminants such as pesticides, pharmaceuticals, metals, polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs). The need to deeply study and update the evolution of microplastic sources, toxicology, extraction and analysis, and behavior is imperative. This review presents an actual state of microplastics, addressing their presence in the environment, the toxicological effects and the need to understand their extent, their interactions with toxic pollutants, the problems that arise in the definition of analytical methods, and the possible alternatives of treatments.