Nonprecious bimetallic Fe, Mo-embedded N-enriched porous biochar for efficient oxidation of aqueous organic contaminants

Magnetic CoFe hydrotalcite composite Co metal-organic framework material efficiently activating peroxymonosulfate to degrade sulfamethoxazole: Oxygen vacancy-mediated radical and non-radical pathways

Herein, a novel rich oxygen vacancy (Ov) cobalt-iron hydrotalcite composite cobalt metal-organic framework material (ZIF-67/CoFe-LDH) was prepared by simple urea water and heat reduction approach and utilized for the peroxymonosulfate (PMS) system to remove sulfamethoxazole (SMX). 95 ± 1.32 % SMX (20 mg/L) was able to degraded in 20 min with TOC removal of 53 ± 1.56 % in ZIF-67/CoFe-LDH/PMS system. The system maintained a fantastic catalytic capability with wide pH range (3-9) and common interfering substances (Cl-, NO3-, CO32-, PO42- and humic acid (HA)), and the degradation efficiency could even remain 80.2 ± 1.48 % at the fifth cycle. Meanwhile, the applicability and feasibility of the catalysts for practical water treatment was verified by the degradation effects of SMX in different water environments and several other typical pollutants. Co and Fe bimetallic active centers synergistically activate PMS, and density functional theory (DFT) predicted adsorption energy about Ov in ZIF-67/CoFe-LDH for PMS was 1.335 eV, and OO bond length of PMS was stretched to 1.826 Å. As a result, PMS was more easily activated and broken, which accelerated the singlet oxygen (1O2), sulfate radical (SO4•-), high-valent metals and other reactive oxygen species (ROS). Radical and non-radical jointly degrading the pollutants improved the catalytic effect. Finally, SMX degradation intermediates were analyzed to explain the degradation pathway and their biotoxicity was also evaluated. This paper provides a new research perspective of oxygen vacancy activating PMS to degrade pollutants.

Selective oxidation decontamination in cobalt molybdate activated Fenton-like oxidation via synergic effect of cobalt and molybdenum

In this study, cobalt molybdate (CoMoO4) activated peracetic acid (PAA) was developed for water purification. CoMoO4/PAA system could remove 95% SMX with pseudo-first-order reaction rate constant of 0.15410 min-1, which was much higher than CoFe2O4/PAA, FeMoO4/PAA, and CoMoO4/persulfate systems. CoMoO4/PAA system follows a non-radical species pathway dominated by the high-valent cobalt (Co(IV)), and CH3C(O)OO• shows a minor contribution to decontamination. Density functional theory (DFT) calculation indicates that the generation of Co(IV) is thermodynamically more favorable than CH3C(O)OO• generation. The abundant Co(IV) generation was attributed to the special structure of CoMoO4 and effect of molybdenum on redox cycle of Co(II)/Co(III). DFT calculation showed that the atoms of SMX with higher ƒ0 and ƒ- values are the main attack sites, which are in accordance with the results of degradation byproducts. CoMoO4/PAA system can effectively reduce biological toxicity after the reaction. Benefiting from the selective of Co(IV) and CH3C(O)OO•, the established CoMoO4/PAA system exhibits excellent anti-interference capacity and satisfactory decontamination performance under actual water conditions. Furthermore, the system was capable of good potential practical application for efficient removal of various organics and favorable reuse. Overall, this study provides a new strategy by CoMoO4 activated PAA for decontamination with high efficiency, high selectivity and favorable anti-interference.

Recent advances in catalyst design, performance, and challenges of metal-heteroatom-co-doped biochar as peroxymonosulfate activator for environmental remediation

The escalation of global water pollution due to emerging pollutants has gained significant attention. To address this issue, catalytic peroxymonosulfate (PMS) activation technology has emerged as a promising treatment approach for effectively decontaminating a wide range of pollutants. Recently, modified biochar has become an increasingly attractive as PMS activator. Metal-heteroatom-co-doped biochar (MH-BC) has emerged as a promising catalyst that can provide enhanced performance over heteroatom-doped and metal-doped biochar due to the synergism between metal and heteroatom in promoting PMS activation. Therefore, this review aims to discuss the fabrication pathways (i.e., internal vs external doping and pre-vs post-modification) and key parameters (i.e., source of precursors, synthesis methods, and synthesis conditions) affecting the performance of MH-BC as PMS activator. Subsequently, an overview of all the possible PMS activation pathways by MH-BC is provided. Subsequently, Also, the detection, identification, and quantification of several reactive species (such as, •OH, SO4•-, O2•-, 1O2, and high valent oxo species) generated in the catalytic PMS system by MH-BC are also evaluated. Lastly, the underlying challenges associated with poor stability, the lack of understanding regarding the interaction between metal and heteroatom during PMS activation and quantification of radicals in multi-ROS system are also deliberated.

Partially oxidized mackinawite/biochar for photo-Fenton organic contaminant removal: Synergistically improve interfacial electron transfer and H2O2 activation

Immobilizing Fe-based nanoparticles on electron-rich biochar has becoming an attractive heterogeneous Fenton-like catalysts (Fe/BC) for wastewater decontamination. However, the insufficient graphitization of biochar causing low electron transfer and by slow H2O2 activation limited its application. Herein, we firstly constructed FeS/biochar composite through all-solid molten salt method (Fe/MSBCs), which can provide strong polarization force and liquid reaction environment to improve carbonization. As expected, the obtained Fe/MSBCs exhibits high surface area and fast interfacial electron transfer between FeS and biochar. More importantly, the partially oxidized FeS (001) facet facilitate H2O2 adsorption and thermodynamically easily decomposition into •OH. Such a synergistic effect endowed them excellent photo-Fenton degradation performance for methyl orange (MO) with large kinetic rate constants (0.079 min-1) and high H2O2 utilization efficiency (95.9%). This study first demonstrated the critical regulatory role of molten salt method in iron-based biochar composites, which provide an alternative for H2O2 activator in water pollutant control.

Effective degradation of phenol by activating PMS with bimetallic Mo and Ni Co-doped g C3N4 composite catalyst: A Fenton-like degradation process promoted by non-free radical 1O2

The application of bimetal supported graphite phase carbon nitride in activated peroxymonosulfate (PMS) process has become a research hotspot in recent years. In this study, 8-g C3N4/Mo/Ni composite catalyst material was successfully prepared by doping Mo and Ni in graphite phase carbon nitride. The bimetallic active sites were formed in the catalyst, and PMS was activated by the metal valence Mo6+/Mo4+ and Ni2+/Ni(0) through redox double cycle to effectively degrade phenol. When pH was neutral, the degradation rate of 20 mg/L phenol solution with 8-g C3N4/Mo/Ni (0.35 g/L) and PMS (0.6 mM) could reach 95% within 20 min. The degradation rate of 8-g C3N4/Mo/Ni/PMS catalytic system could reach more than 90% within 20min under the condition of pH range of 3-11 and different anions. Meanwhile, the degradation effects of RhB, MB and OFX on different pollutants within 30min were 99%, 100% and 82%, respectively. Electron spin resonance and quenching experiments showed that in 8-g C3N4/Mo/Ni/PMS system, the degradation mechanism was mainly non-free radicals, and the main active species in the degradation process was 1O2. This study provides a new idea for the study of bimetal supported graphite phase carbon nitride activation of PMS and the theoretical study of degradation mechanism.

Novel Magnetic MnFe2O4-Decorated Graphite-Like Porous Biochar as a Heterogeneous Catalyst for Activation of Peroxydisulfate Toward Degradation of Rhodamine B

A magnetic MnFe2O4-modified graphite-like porous biochar composite (MnFe2O4/KFS800) was synthesized by the hydrothermal method, and its catalytic activity was evaluated in the activation of peroxydisulfate toward degradation of Rhodamine B. After characterization by SEM, XRD, and the BET method, the specific surface area and total pore volume of the MnFe2O4/KFS800 catalyst reached 121 m2/g and 0.263 m3/g, and exhibited plate-like morphology with good crystallinity. The degradation rate of Rhodamine B by the obtained composite was more than 91.1% when the initial concentration of RhB was 10 mg/L, the dosage of MnFe2O4/KFS800 was 0.2 g/L, and the initial pH was 6.7. Then the anti-interference ability of the obtained composite was studied, and it was found that there was a little effect on the degradation of Rhodamine B with the presence of humic acid. Finally, quenching test, EPR research, and XPS analysis were conducted to reveal the catalytic mechanism, and possible mechanism was a synergistic behavior of free radicals (SO4•-, •OH, O2•-) and nonfree radicals (1O2), and trace amounts of uncarbonized bagasse was also involved in the formation of free radicals.

Highly dispersed Fe7S8 anchored on sp2/sp3 hybridized carbon boosting peroxymonosulfate activation for enhanced EOCs elimination though singlet oxygen-dominated nonradical pathway

The synergistic effect of carbon materials with high sp2/sp3 hybridized carbon ratio and metal materials can enhance the efficiency of peroxymonosulfate (PMS) based advanced oxidation processes. In this study, a composite of highly dispersed Fe7S8 anchored on sp2/sp3 hybridized carbon (Fe7S8@HC) was developed by a facile synthesis for PMS activation. Within 10 min, the removal efficiency of the target pollutant doxycycline (DOX) could reach ca. 96 % in optimal Fe7S8@HC/PMS system through a 1O2-dominated non-radical pathway. Correlation mechanism analysis revealed that thiophene S, sp2/sp3 ratio and Fe(II) were critical factors for elongating of the O-O bond of PMS. Moreover, the Fe7S8@HC/PMS system exhibited favorable adaptability to interference such as common inorganic anions, humic acid and pH changes and could effectively remove various organic pollutants with low ionization potential. Moreover, the system maintained high DOX removal efficiency by running 30 cycles in a continuous flow reactor. Finally, susceptible sites of DOX and four degradation pathways were proposed by density functional theory calculation and LC-MS detection. This work not only offered new insights into the design of high-performance catalysts combining metal and biomass-based carbon materials, but also provided technical support for the remediation of water bodies containing emerging organic contaminants.

Polydopamine-modified MOF-5-derived carbon as persulfate activator for aniline aerofloat degradation

Residual flotation chemicals in beneficiation wastewater seriously threaten local ecosystems, such as groundwater or soil, and must be treated effectively. Currently, the degradation of organic pollutants using nitrided MOFs-derived carbon to activate persulfate (PDS) has attracted considerable attention. Hence, we developed a new synthetic strategy to load dopamine hydrochloride (PDA) onto MOF-5-derived porous carbon (PC) to form NPC, and the degradation of a typical flotation Aniline aerofloat (AAF) at high salinity by a low dose of the NPC/PDS system was investigated. Several characterization analyses such as TEM, XRD, Raman, FT-IR and XPS demonstrated that the nitrogen-rich indolequinone unit in PDA provided nitrogen to PC during the pyrolysis process. This enabled the core-shell structure of NPC and the synergy among the multiple components to induce the AAF degradation by PDS over a wide pH scale in a short period of time. It was deduced that the degradation of AAF by the NPC-8/PDS system was a non-radical pathway dominated by 1O2, which relied mainly on the conversion of superoxide radicals (O2•-) and surface-bound radicals. Among them, the pyridine N in the sp2 hybrid carbon was considered as a possible active site. This non-radical pathway was resistant to pH changes and background substances in the water, and well overcame the inhibition of the reaction by natural organic substances and inorganic anions in natural water. In this study, A novel approach to the synthesis of homogeneous MOFs nuclear-derived porous carbon was proposed and the application of MOFs-derived porous carbon for AAF remediation of mineral processing wastewater was broadened.

Synthesis and Peroxide Activation Mechanism of Bimetallic MOF for Water Contaminant Degradation: A Review

Metal-organic framework (MOF) materials possess a large specific surface area, high porosity, and atomically dispersed metal active sites, which confer excellent catalytic performance as peroxide (peroxodisulfate (PDS), peroxomonosulfate (PMS), and hydrogen peroxide (H₂O₂)) activation catalysts. However, the limited electron transfer characteristics and chemical stability of traditional monometallic MOFs restrict their catalytic performance and large-scale application in advanced oxidation reactions. Furthermore, the single-metal active site and uniform charge density distribution of monometallic MOFs result in a fixed activation reaction path of peroxide in the Fenton-like reaction process. To address these limitations, bimetallic MOFs have been developed to improve catalytic activity, stability, and reaction controllability in peroxide activation reactions. Compared with monometallic MOFs, bimetallic MOFs enhance the active site of the material, promote internal electron transfer, and even alter the activation path through the synergistic effect of bimetals. In this review, we systematically summarize the preparation methods of bimetallic MOFs and the mechanism of activating different peroxide systems. Moreover, we discuss the reaction factors that affect the process of peroxide activation. This report aims to expand the understanding of bimetallic MOF synthesis and their catalytic mechanisms in advanced oxidation processes.

Significant roles of surface functional groups and Fe/Co redox reactions on peroxymonosulfate activation by hydrochar-supported cobalt ferrite for simultaneous degradation of monochlorobenzene and p-chloroaniline

CoFe₂O₄/hydrochar composites (FeCo@HC) were synthesized via a facile one-step hydrothermal method and utilized to activate peroxymonosulfate (PMS) for simultaneous degradation of monochlorobenzene (MCB) and p-chloroaniline (PCA). Additionally, the effects of humic acid, Cl^-, HCO₃^-, H₂PO₄^-, HPO₄^2- and water matrices were investigated and degradation pathways of MCB and PCA were proposed. The removal efficiencies of MCB and PCA were higher in FeCo@HC140-10/PMS system obtained under hydrothermal temperature of 140 °C than FeCo@HC180-10/PMS and FeCo@HC220-10/PMS systems obtained under higher temperatures. Radical species (i.e., SO₄^•-, •OH) and nonradical pathways (i.e., ¹O₂, Fe (IV)/Co (IV) and electron transfer through surface FeCo@HC140-10/PMS* complex) co-occurred in the FeCo@HC140-10/PMS system, while radical and nonradical pathways were dominant in degrading MCB and PCA respectively. The surface functional groups (i.e., C-OH and CO) and Fe/Co redox cycles played crucial roles in the PMS activation. MCB degradation was significantly inhibited in the mixed MCB/PCA solution over that in the single MCB solution, whereas PCA degradation was slightly promoted in the mixed MCB/PCA solution. These findings are significant for the provision of a low-cost and environmentally-benign synthesis of bimetal-hydrochar composites and more detailed understanding of the related mechanisms on PMS activation for simultaneous removal of the mixed contaminants in groundwater.

Gravity-driven rattan-based catalytic filter for rapid and highly efficient organic pollutant removal

Metal organic frameworks hold great promise as heterogeneous catalysts in sulfate radical (SO₄^∙-) based advanced oxidation. However, the aggregation of powdered MOF crystals and the complicated recovery procedure largely hinder their large-scale practical applications. It is important to develop eco-friendly and adaptable substrate-immobilized metal organic frameworks. Based on the hierarchical pore structure of the rattan, gravity-driven metal organic frameworks loaded rattan-based catalytic filter was designed to degrade organic pollutants by activating PMS at high liquid fluxes. Inspired by the water transportation of rattan, ZIF-67 was in-situ grown uniformly on the rattan channels inner surface using the continuous flow method. The intrinsically aligned microchannels in the vascular bundles of rattan acted as reaction compartments for the immobilization and stabilization of ZIF-67. Furthermore, the rattan-based catalytic filter exhibited excellent gravity-driven catalytic activity (up to 100 % treatment efficiency for a water flux of 10173.6 L·m^-2·h^-1), recyclability, and stability of organic pollutant degradation. After ten cycles, the TOC removal of ZIF-67@rattan was 69.34 %, maintaining a stable mineralisation capacity for pollutants. The inhibitory effect of the micro-channel promoted the interaction between active groups and contaminants, increasing the degradation efficiency and improving the stability of the composite. The design of a gravity-driven rattan-based catalytic filter for wastewater treatment provides an effective strategy for developing renewable and continuous catalytic systems.

Enhanced activation of peroxymonosulfate by a floating FeMo3Ox/C3N4 photocatalyst under visible-light assistance for oxytetracycline degradation: Performance, mechanisms and comparison with H2O2 activation

In this study, a floating FeMo₃O_x/C₃N₄-EP (FM-C-P) composite with highly stability and reusability was synthesized by an impregnation/calcination process and used to activate peroxymonosulfate (PMS) for oxytetracycline (OTC) degradation under visible light irradiation. The results demonstrated that 98.1% of OTC (50 mg/L) removal can be achieved by the activation of PMS (5 mM) using FM-C-P (1 g/L) in 30 min under visible light irradiation. The pseudo-first-order rate constant was calculated to be 0.181 min^-1. The degradation process with PMS was hardly affected by pH (3-11) and co-existing substance. ·SO₄^-, ·OH, ·O₂^- and ¹O₂ were produced in the Vis/PMS/FM-C-P system and ¹O₂ was determined to be the main reactive oxygen species (ROSs). The high efficiency of ROSs production mainly contributed to two mechanisms. Firstly, via the combination of ≡Fe (II)-·SO₅^- and free state ·SO₅^-, ¹O₂ could be generated on the Fe-N_x site. Secondly, photo-induced electrons in the FeMo₃O_x/g-C₃N₄ heterojunction could react with Fe (III) and Mo (VI) to form catalytically active species Fe (II) and Mo (IV). Moreover, the proposed degradation pathway and the toxicity of intermediated products was analyzed. Overall, this study was expected to deepen the understanding of the photo-assisted PMS activation and the generation of ¹O₂ with the presence of metal-oxide/C₃N₄ heterojunction.

Efficient peroxymonosulfate activation by biochar-based nanohybrids for the degradation of pharmaceutical and personal care products in aquatic environments

Recently, pharmaceutical and personal care products (PPCPs) have been of wide concern due to their ecological toxicity, persistence, and ubiquity in aquatic environments. Peroxymonosulfate-based advanced oxidation processes (PMS-AOPs) have shown great potential for eliminating PPCPs due to their superior oxidation ability and adaptability. Biochar-based nanohybrids have been employed as emerging catalysts for peroxymonosulfate (PMS) activation. Until now, few researchers have summarized PMS activation by biochar-based catalysts for PPCPs removal. In this review, the types, sources, fates, and ecological toxicities of PPCPs were first summarized. Furthermore, various preparation and modification methods of biochar-based catalysts were systematically introduced. Importantly, the application of activating PMS with biochar-based multifunctional nanocomposites for eliminating PPCPs was reviewed. The influencing factors, such as catalysts dosage, PMS dosage, solution pH, temperature, anions, natural organic matters (NOMs), and pollutants concentration were broadly discussed. Biochar-based catalysts can act as electron donors, electron acceptors, and electron shuttles to activate PMS for the removal of PPCPs through radical pathways or/and non-radical pathways. The degradation mechanisms of PPCPs are correlated with persistent free radicals (PFRs), metal species, defective sites, graphitized degree, functional groups, electronic attributes, and the hybridization modes of biochar-based catalysts. Finally, the current problems and further research directions on the industrial application of biochar-based nanocomposites were proposed. This study provides some enlightenment for the efficient removal of PPCPs with biochar-based catalysts in PMS-AOPs.

The calcium alginate-immobilized Co-g-C3N4 composite microspheres as an efficient mediator to activate peroxymonosulfate for degrading organic pollutants

Poor water stability and difficult separation severely limited the application of Co-based catalysts in persulfate activation. Herein, for the first time, the calcium alginate-immobilized Co-g-C₃N₄-2 composite microspheres were prepared by a feasible method. Notably, embedding Co ion into g-C₃N₄ can improve its specific surface area and electrochemical activities. More significantly, as-prepared Co-g-C₃N₄-2 microsphere presented excellent catalytic performance in PMS activation for the degradation of TC. For the activation mechanisms of PMS over Co-g-C₃N₄-2 microspheres, the calcium alginate microspheres could mediate the direct electron transfer between TC and PMS, while both radical and nonradical pathways were involved in the activation of PMS over Co-g-C₃N₄-2. Meanwhile, SO₄^•-, OH^•, O₂^•- and ¹O₂ were major reactive oxygen species formed in the Co-g-C₃N₄-2 microsphere/PMS system. Proposed Co-g-C₃N₄-2 microsphere/PMS system still exhibited great degradation ability towards TC over a wide pH range, and co-existing anions had weak influence on TC degradation over Co-g-C₃N₄-2 microsphere/PMS system. Moreover, the construction of Co-g-C₃N₄-2 microspheres not only avoided the release of metal ion from catalyst, but also provided convenience for the recovery of catalyst. In short, current work shared some novel insights into the application of heterogeneous catalysis in persulfate activation for wastewater treatment.

A newly-designed free-standing NiCo2O4 nanosheet array as effective mediator to activate peroxymonosulfate for rapid degradation of emerging organic pollutant with high concentration

Nowadays effective treatment of high concentration organic wastewater is still a formidable task facing human beings. Herein, for the first time, a well-defined ZIF-67-derived NiCo₂O₄ nanosheet array was successfully prepared by a feasible method. In comparison with ordinary NiCo₂O₄ nanosphere, the formation of nanosheet structure could offer more opportunities to exposure internal active sites of NiCo₂O₄, thereby resulting in smaller interface resistance and higher charge transfer efficiency. As expected, ZIF-67-derived NiCo₂O₄ nanosheet array displayed great performance in peroxymonosulfate (PMS) activation. More importantly, recyclable redox couples of Co³⁺/Co²⁺ and Ni³⁺/Ni²⁺ endowed the stable catalytic activity of NiCo₂O₄ nanosheet. Interestingly, developed NiCo₂O₄-1/PMS oxidation system could achieve the effective degradation of antibiotics with high concentration in a short time. Both radical and nonradical pathways were involved into PMS activation, wherein SO₄^-, OH, O₂^- and ¹O₂ were major reactive oxygen species. The formation paths of reactive oxygen species and effects of inorganic anions were also investigated. Electrochemical analyses revealed that NiCo₂O₄-1 with nanosheet structure mediated the electron transfer between PMS and tetracycline (TC), which played a vital role in TC degradation. Furthermore, developed NiCo₂O₄-1/PMS oxidation system displayed great removal ability towards TC in actual water samples, and degradation products were low toxicity or no toxicity. In short, current work not only developed an effective oxidation system for completing the rapid degradation of antibiotic with high concentration, but also shared some novel insights into the activation mechanism of SR-AOPs.

Iron-Based Nanocatalysts for Electrochemical Nitrate Reduction

Nitrate has a high level of stability and persistence in water, endangering human health and aquatic ecosystems. Due to its high reliability and efficiency, the electrochemical nitrate reduction reaction (NO₃ RR) is regarded as the best available option for mitigating excess nitrate in water and wastewater, especially for the removal of trace levels of nitrate. One of the most critical factors in the electrochemical reduction are the catalysts, which directly affect the reaction efficiency of nitrate removal. Iron-based nanocatalysts, which have the advantages of nontoxicity, wide availability, and low cost, have emerged as a promising electrochemical NO₃ RR material in recent years. This review covers major aspects of iron-based nanocatalysts for electrochemical NO₃ RR, including synthetic methods, structural design, performance enhancement, electrocatalytic nitrate reduction test, and reduction mechanism. The recent progress of iron-based nanocatalysts for electrochemical NO₃ RR and the mechanism of functional advantages for modified structures are reviewed from the perspectives of loading, doping, and assembly strategies, in order to realize the conversion from pollutant nitrate to harmless nitrogen or ammonia and other sustainable products. Finally, challenges and future directions for the development of low-cost and highly-efficient iron-based nanocatalysts are explored.

Highly dispersive Ru confined in porous ultrathin g-C3N4 nanosheets as an efficient peroxymonosulfate activator for removal of organic pollutants

Ru species were loaded on a two-dimensional (2D) material of graphitic carbon nitride (2D g-C₃N₄) to serve as the efficient AOP catalysts. The catalytic activity was closely related to the dispersion degree of Ru, as determined by the inherent nanoarchitecture of the supporting material. Ultrathin g-C₃N₄ nanosheets with a unique porous structure were fabricated by further thermally oxidizing and etching bulk g-C₃N₄ (bCN) in air. Homogeneous dispersion of Ru species was successfully achieved on the porous few-layered g-C₃N₄ nanosheets (pCN) by stirring, washing, freeze drying and annealing processes to obtain Ru-pCN catalysts, whereas bCN or multilayered g-C₃N₄ (mCN) led to the aggregation of Ru nanoparticles in Ru-bCN and Ru-mCN materials. The conventional impregnation method also caused the resulting Ru-pCN-imp catalyst with undesirable Ru aggregation in spite of employing pCN. The optimal 4.4Ru-pCN removed 100% of 2,4,6-trichlorophenol (TCP) within only 3 min, superior to its counterpart samples, and exhibited remarkable degradation efficiencies for methyl orange, neutral red, 4-chlorophenol, tetracycline and oxytetracycline. Mechanistic studies suggested that four radicals, e.g., ^•OH, SO₄^{• -}, O₂^{• -} and ¹O₂ were generated during the peroxymonosulfate (PMS) activation, in which SO₄^{• -} and ¹O₂ played a major role.

Enabling dual valorization of lignocellulose by fluorescent lignin carbon dots and biochar-supported persulfate activation: Towards waste-treats-pollutant

The rationally-designed lignocellulose valorization that promotes a novel "waste-treats-pollutant" standpoint is highly desired yet still challenging for the spread of biomass industry. At this point, a cascade technique with the assistance of deep eutectic solvent (DES) fractionation is tailored to dually valorize wheat straw into fluorescent lignin carbon dots (LCDs) and bimetallic Mg-Fe oxide-decorated biochar (MBC) via solvothermal engineering and co-precipitation/pyrolysis respectively. Benefitting from the abundance of β-aryl ether and hydroxyl groups in DES-extracted lignin, the photoluminescence LCDs emit blue color in a wide excitation span, which can be adopted to selectively detect ferric ions (Fe³⁺) in a broad dosage scale with a highly linear correlation of 10-50 μM. Taking advantages of the MBC-aided persulfate activation, we propose the efficient arbidol removal system with a universal concentration of 20-200 ppm in the scalable pH ranging from 3 to 11. The dominate migration pathways involving with active oxygen species and surface electron transfer are comprehensively studied via electron paramagnetic resonance, radical-quenching experiments, and theoretical arithmetic. With the endeavor of biorefineries, this full-scale platform ignites the dazzling wildfire from dual lignocellulose valorization that will also seek its accurate position in the kingdoms of functional materials and wastewater restoration.

Architecting an indirect Z-scheme NiCo2O4@CdS-Ag photocatalytic system with enhanced charge transfer for high-efficiency degradation of emerging pollutants

Bimetallic oxides with spinel structure show great prospects in the photocatalysis owing to many active sites. Herein, a novel 500NiCo₂O₄@CdS-5%Ag composite was fabricated via a feasible strategy. Interestingly, the combination with NiCo₂O₄ could significantly enhance the absorption ability of CdS for visible light. Benefiting from the formation of heterojunction structure between NiCo₂O₄ and CdS, the recombination of photogenerated electrons and holes was remarkably restrained. As an effective mediator, deposition of Ag could further promote the transfer of photogenerated charge carriers, thereby accelerating the reaction rate. Meanwhile, light absorption capacity of composite was also improved, owing to the surface plasmon resonance effect of metallic Ag. More importantly, 500NiCo₂O₄@CdS-5%Ag composite with great stability displayed an excellent performance in the photocatalytic degradation of OFX, and its highest removal efficiency was as high as 99.14%. Possible degradation pathways of OFX were given, and most of OFX could be degraded into CO₂, H₂O and other by-products with no toxicity. Significantly, the separation and transfer of photogenerated charge carriers followed indirect Z-scheme heterojunction mechanism. The O₂^-, OH and ¹O₂ were main active species in photocatalytic reaction system. All in all, current work inspired some new ideas for designing novel photocatalytic system in wastewater treatment.

Room-temperature preparation of highly efficient NH2-MIL-101(Fe) catalyst: The important role of -NH2 in accelerating Fe(III)/Fe(II) cycling

The slow redox rate of Fe(III)/Fe(II) couples is a rate-limiting step for Fenton-like performance of Fe-MOFs. In this study, a series of catalysts (MIL-101) with various p-phthalic acid/2-aminoterephthalic acid (H₂BDC/NH₂-H₂BDC) molar ratios were prepared using a simple and mild chemical method and applied for catalyzed degradation of bisphenol A (BPA). Interestingly, the -NH₂ modified MIL-101(Fe) can adjust Fe-Oxo node by increasing the electron density of Fe(III) in the presence of -NH₂ group with high electron density, thus forming Fe(II) in situ in MOFs. Meanwhile, the -NH₂ groups used as electron-donors can promote electron transfer, resulting in faster Fe(III)→Fe(II) half-reaction and active H₂O₂ to continuously generate •OH radical. The BPA degradation and rate constant of Fe-BDC-NH₂/H₂O₂ system are 15.4-fold and 86.8-fold higher than that of Fe-BDC/H₂O₂ system, respectively. The density functional theory (DFT) calculations showed that Fe-BDC-NH₂ possesses higher Fermi level energy (-4.88 eV) and lower activation energy barriers (0.32 eV) compared with Fe-BDC. Moreover, Fe-BDC-NH₂ showed good reusability and stability. This work offers a highly efficient and stable MOFs-based Fenton-like catalyst to rapidly degrade organic pollutants over a wide pH range for potential applications in wastewater treatment.

Insights into the degradation of emerging organic pollutants by peroxydisulfate activated with Co3O4@NiO: role of each component and catalytic mechanism

A novel Co3O4@NiO as a high-efficiency catalyst was employed to activate peroxydisulfate for degrading antibiotics, and the catalytic mechanism was investigated.