Recent advances in synthesis and modification of carbon dots for optical sensing of pesticides

CdTe@ZnS quantum dots for rapid detection of organophosphorus pesticide in agricultural products

Organophosphorus pesticides (OPPs) constitute the most widely employed class of pesticides. However, the prevalent use of OPPs, while advantageous, raises concerns due to their toxicity, posing serious threats to food safety. Chemical sensors utilizing quantum dots (QDs) demonstrate promising applications in rapidly detecting OPPs residues, thereby facilitating efficient inspection of agricultural products. In this study, we employ an aqueous synthesis approach to prepare low toxic CdTe@ZnS QDs with stable fluorescence properties. To mitigate the risk of imprecise measurements stemming from the inherent susceptibility of fluorescence to quenching, we have adopted the principle of fluorescence resonance energy transfer (FRET) for the construction of the turn-on quantum dot sensor. With a detection limit for chlorpyrifos as low as 10 ppb (10 μg/L), the QDs sensor exhibits notable resistance to interference from various pesticides. Application of this system to detect organophosphorothioate pesticides in apples produced results consistent with those obtained from high-performance liquid chromatography (HPLC) detection, affirming the promising application prospects of this sensing system for the rapid detection of OPPs residues.

Two swords combination: Smartphone-assisted ratiometric fluorescent and paper sensors for dual-mode detection of glyphosate in edible malt

The long-term and excessive use of glyphosate (GLY) in diverse matrices has caused serious hazard to the human and environment. However, the ultrasensitive detection of GLY still remains challenging. In this study, the smartphone-assisted dual-signal mode ratiometric fluorescent and paper sensors based on the red-emissive gold nanoclusters (R-AuNCs) and blue-emissive carbon dots (B-CDs) were ingeniously designed accurate and sensitive detection of GLY. Upon the presence of GLY, it would quench the fluorescence of B-CDs through dynamic quenching effect, and strengthen the fluorescence response of R-AuNCs due to aggregation-induced enhancement effect. Through calculating the GLY-induced fluorescence intensity ratio of B-CDs to R-AuNCs by using a fluorescence spectrophotometer, low to 0.218 μg/mL of GLY could be detected in lab in a wide concentration range of 0.3-12 μg/mL with high recovery of 94.7-103.1% in the spiked malt samples. The smartphone-assisted ratiometric fluorescent sensor achieved in the 96-well plate could monitor 0-11 μg/mL of GLY with satisfactory recovery of 94.1-107.0% in real edible malt matrices for high-throughput analysis. In addition, a portable smartphone-assisted ratiometric paper sensor established through directly depositing the combined B-CDs/R-AuNCs probes on the test strip could realize on-site measurement of 2-8 μg/mL of GLY with good linear relationship. This study provides new insights into developing the dual-signal ratiometric sensing platforms for the in-lab sensitive detection, high-throughput analysis, and on-site portable measurement of more trace contaminants in foods, clinical and environmental samples.

A novel chemiluminescence sensor for alpha-fetoprotein detection based on an aptamer-luminol modified magnetic graphene oxide and copper-based MOF composite

Herein, an aptamer-luminol modified magnetic graphene oxide and copper-based MOF composite was prepared and used to build a novel target-triggered "turn on" chemiluminescence (CL) sensor for alpha-fetoprotein (AFP) detection. Magnetic graphene oxide (MGO) was functionalized with the complementary sequence of the AFP aptamer (cDNA), and then MGO-cDNA was linked to aptamer modified luminol (Apt-luminol) through the complementary base pairing effect. The functionalized magnetic graphene oxide (MGO-cDNA/Apt-luminol) was prepared as a specific magnetic separation and signal switch material. ZnONPs-Au@CuMOFs shows excellent catalytic performance and was used as a catalyst for the luminol-H2O2 reaction. AFP will specifically recognize and bind to Apt on MGO-cDNA/Apt-luminol when AFP is present, which causes luminol release and triggers the CL reaction. The released luminol encounters ZnONPs-Au@CuMOFs and produces strong CL intensity. Therefore, a novel target-triggered "turn on" CL method with high selectivity and sensitivity for detecting AFP has been established. The linear range and detection limit were 1.0 × 10-4-50 ng mL-1 and 4.2 × 10-5 ng mL-1, respectively. The sensor also exhibited good selectivity, reproducibility and stability, and was finally used for AFP detection in serum samples.

Smartphone-Based Techniques Using Carbon Dot Nanomaterials for Food Safety Analysis

The development of portable and efficient nanoprobes to realize the quantitative/qualitative onsite determination of food pollutants is of immense importance for safeguarding human health and food safety. With the advent of the smartphone, the digital imaging property causes it to be an ideal diagnostic substrate to point-of-care analysis probes. Besides, merging the versatility of carbon dots nanostructures and bioreceptor abilities has opened an innovative assortment of construction blocks to design advanced nanoprobes or improving those existing ones. On this ground, massive endeavors have been made to combine mobile phones with smart nanomaterials to produce portable (bio)sensors in a reliable, low cost, rapid, and even facile-to-implement area with inadequate resources. Herein, this work outlines the latest advancement of carbon dots nanostructures on smartphone for onsite detecting of agri-food pollutants. Particularly, we afford a summary of numerous approaches applied for target molecule diagnosis (pesticides, mycotoxins, pathogens, antibiotics, and metal ions), for instance microscopic imaging, fluorescence, colorimetric, and electrochemical techniques. Authors tried to list those scaffolds that are well-recognized in complex media or those using novel constructions/techniques. Lastly, we also point out some challenges and appealing prospects related to the enhancement of high-efficiency smartphone based carbon dots systems.

Carbonized polymer dots-based molecular imprinting: An adsorbent with enhanced selectivity for highly efficient recognition and removal of ceftiofur sodium from complex samples

Highly selective removal of residual cephalosporin antibiotics from complex systems is crucial for human health and ecological environment protection. Herein, a newly molecularly imprinted polymer adsorbent (CPDs-NH2@MIP) with enhanced selectivity for ceftiofur sodium (CTFS) was developed by using the special carbonized polymer dots (CPDs-NH2) as functional monomer. The CPDs-NH2 has a nano-spherical structure and functionalized groups (CC, -NH2) via the incomplete carbonization polymerization of citric acid, acrylamide and ethylenediamine, which can accurately interact with CTFS by overcoming steric hindrance, resulting in more precisely imprinted sites and reducing non-imprinted regions in MIP. The presented CPDs-NH2@MIP exhibited excellent adsorption capacity for CTFS (68.62 mg g-1), achieving equilibrium within 10 min, and highly selectivity in mixed solution containing five coexisting substances, with an imprinted factor (5.61). Compared with commercial adsorbents and MIPs prepared with traditional chain functional monomers, the CPDs-NH2@MIP showed significant advantage in selective recognition and separation of target. Analysis of microstructure and mechanism proved that usage of the spherical functional monomer generated precise imprinting sites and dense structure in CPDs-NH2@MIP, which effectively enhanced the selectivity in complex system combined with hydrogen bonding interaction. The idea of designing and using spherical functional monomer will promote the practicality of molecularly imprinted polymer adsorbents.

Ultrasensitive Fluorescent Microsensors Based on Aptamers Modified with SYBR Green I for Visual Quantitative Detection of Organophosphate Pesticides

Organophosphate pesticides (OPs) are widely utilized in agricultural production, and the residues threaten public health and environmental safety due to their toxicity. Herein, a novel and simple DNA aptamer-based sensor has been fabricated for the rapid, visual, and quantitative detection of profenofos and isocarbophos. The proposed DNA aptamers with a G-quadruplex spatial structure could be recognized by SYBR Green I (SG-I), resulting in strong green fluorescence emitted by SG-I. The DNA aptamers exhibit a higher specific binding ability to target OP molecules through aromatic ring stacking, disrupting the interaction between SG-I and DNA aptamers to induce green fluorescence quenching. Meanwhile, the fluorescence wavelength of G-quadruplex fluorescence emission peaks changes, accompanied by an obvious fluorescence variation from green to blue. SG-I-modified aptasensor without any additive reference fluorescence units for use in multicolor fluorescence assay for selective monitoring of OPs was first developed. The developed aptasensor provides a favorable linear range from 0 to 200 nM, with a low detection limit of 2.48 and 3.01 nM for profenofos and isocarbophos, respectively. Moreover, it offers high selectivity and stability in real sample detection with high recoveries. Then, a self-designed portable smartphone sensing platform was successfully used for quantitative result outputs, demonstrating experience in designing a neotype sensing strategy for point-of-care pesticide monitoring.

Functional carbon dots-hydrogel complex for selective antibacterial and detection applications

The carbon dots (CDs) with excellent optical properties and their hydrogel complex are of great significance in biomedicine, healthcare and biochemical detection fields. This paper reports the preparation of green-emitting CDs (MA-CDs) through one-step hydrothermal route with citric acid as reducing agent, L-malic acid as carbon source and N-(2-hydroxyethyl)ethylenediamine as nitrogen source. To expand its application in biology, MA-CDs were coupled with vancomycin to obtain multifunctional CDs (VMA-CDs). The prepared VMA-CDs exhibit selective antibacterial behavior to Gram-positive bacteria, and it could be used as a fluorescent probe to selectively label Staphylococcus aureus (S. aureus). Moreover, thanks to the excellent optical properties of VMA-CDs, it has been used as a fluorescent sensor to detect Au3+ with detection range of 6.50 nM-21.93 μM and detection limit 3.98 nM. By introducing the fluorescence of CDs as the reference signal, and VMA-CDs as a response signal, the hydrogel (V-SP) was prepared and realized the detection of Au3+ in microfluidics with assistance of a smartphone to collect and analyze data.

Smartphone-assisted carbon dots fluorescent sensing platform for visual detection of Thiophanate-methyl in fruits and vegetables

Trimesic acid and o-phenylenediamine (OPD) were employed as precursors to synthesize yellow-green fluorescent carbon dots (Y-G-CDs) by solvothermal synthesis for the sensitive detection of Thiophanate-methyl (TM) in real agricultural products. The Y-G-CDs probe could specifically recognize the TM primarily through π-π stacking. Moreover, the fluorescence quenching of the probe was ultimately dominated by the PET effect, based on the interaction between the abundant carboxyl groups on the surface of the Y-G-CDs and the amino group of TM. A strong linear relationship between the fluorescence quenching of the probe and TM concentration in the range of 0-10 µmol/L was observed and the limit of detection (LOD) was calculated to be 50.7 nmol/L. Compared to the interference pesticides, the Y-G-CDs probe demonstrated exceptional selectivity toward TM, with satisfactory recoveries of 96.3 % - 104.2 % in spiked food samples. The Y-G-CDs probe enables simple pretreatment, cost-effective, and on-site detection of TM in fruits and vegetables with visual detection of the TM employing a smartphone-assisted sensing platform.

Simultaneous sensing of carbidopa and levodopa by a novel strategy based on dual-emission ratiometric assay of modified carbon dots

Rapid control of the content of Parkinson's drugs in biological fluids and pharmaceutical formulations is of great importance because changes in the concentration of these drugs affect their bioavailability and biopharmaceutical properties. Therefore, we presented a simple and convenient method for the ratiometric detection of carbidopa and levodopa for carbon dots (CDs) dual-fluorescent emission. Dual-emission CDs were prepared from chitosan using a microwave method, following which the surface was chemically modified with terephthalaldehyde. CDs had two strong well-separated peaks at 445 and 510 nm. The relative measurement of carbidopa and levodopa was based on the static extinction of CDs at 445 nm and increase at 510 nm, respectively. The linear range for carbidopa measurement was 2.5-300 nM, with a limit of detection (LOD) of 2.1 nM, and a relative standard deviation (RSD) of 1.68%. Further, the linear range for levodopa measurement was equal to 3.0-400 nM, with LOD and RSD% of 2.8 nM and 3.5%, respectively. Also, selectivity of ratiometric sensor in the presence of interferences was investigated, which showed that the recovery of carbidopa and levodopa in serum and urine samples has changed between 96.80% and 116.24% with RSD% 0.11-0.77. CDs also provided good results for the determination of carbidopa and levodopa in real samples, and had high selectivity in the presence of possible interferences.

A sandwich-type dual-mode biosensor based on graphdiyne and DNA nanoframework for ultra-sensitive detection of CD142 gene

Thalassemia is a globally prevalent single-gene blood disorder, with nearly 7% of the world's population being carriers. Therefore, the development of specific and sensitive methods for thalassemia detection holds significant importance. Herein, a sandwich-type electrochemical/colorimetric dual-mode biosensor is developed based on gold nanoparticles (AuNPs)/graphdiyne (GDY) and DNA nanoframeworks for ultra-sensitive detection of CD142 gene associated with sickle cell anemia. Utilizing AuNPs/GDY as the substrate electrode, the fabricated sandwiched DNA nanoframework not only improves selectivity but also introduces numerous signal probes to further amplify the output signal. In the electrochemical mode, glucose oxidase catalyzes the oxidation of glucose, generating electrons that are transferred to the biocathode for a reduction reaction, resulting in an electric signal proportional to the target concentration. In the colorimetric mode, glucose oxidase catalyzes the generation of H2O2 from glucose, and with the aid of horseradish peroxidase, H2O2 oxidizes 3,3',5,5'-tetramethylbenzidine to produce a colored product, enabling colorimetric detection of the target. The dual-mode biosensor demonstrates a detection range of 0.0001-100 pM in the electrochemical mode and a detection range of 0.0001-10,000 pM in the colorimetric mode. The detection limit in the electrochemical mode is determined to be 30.4 aM (S/N=3), while in the colorimetric mode is of 35.6 aM (S/N=3). This dual-mode detection achieves ultra-sensitive detection of CD142, demonstrating broad prospects for application.

Multiomics Sequencing and AlphaFold2 Analysis of the Stereoselective Behavior of Mefentrifluconazole for Bioactivity Improvement and Risk Reduction

As the first isopropanol chiral triazole fungicide, mefentrifluconazole has broad prospects for application. In this study, the stereoselective stability, bioactivity, fate, and biotoxicity were systematically investigated. Our results indicated that the stability of mefentrifluconazole enantiomers differed between environmental media, and they were stable in water and sediment in the dark. The bactericidal activity of R-mefentrifluconazole against the four target pathogens was 4.6-43 times higher than that of S-mefentrifluconazole. In the water-sediment system, S-mefentrifluconazole dissipated faster than R-mefentrifluconazole in water; however, its accumulation capacity was higher than that of R-mefentrifluconazole in sediment and zebrafish. S-Mefentrifluconazole induced more differentially expressed genes (DEGs) and differentially expressed proteins (DEPs) in zebrafish than did R-mefentrifluconazole. Multiomics sequencing results showed that S-mefentrifluconazole enhanced the antioxidant, detoxification, immune, and metabolic functions of zebrafish by interacting with related proteins. Based on AlphaFold2 modeling and molecular docking, mefentrifluconazole enantiomers had different binding modes with key target proteins in pathogens and zebrafish, which may be the main reason for the stereoselective differences in bioactivity and biotoxicity. Based on its excellent bioactivity and low biotoxicity, the R-enantiomer can be developed to improve the bioactivity and reduce the risk of mefentrifluconazole.

Zero-Dimensional Carbon Nanomaterials for Fluorescent Sensing and Imaging

Advances in nanotechnology and nanomaterials have attracted considerable interest and play key roles in scientific innovations in diverse fields. In particular, increased attention has been focused on carbon-based nanomaterials exhibiting diverse extended structures and unique properties. Among these materials, zero-dimensional structures, including fullerenes, carbon nano-onions, carbon nanodiamonds, and carbon dots, possess excellent bioaffinities and superior fluorescence properties that make these structures suitable for application to environmental and biological sensing, imaging, and therapeutics. This review provides a systematic overview of the classification and structural properties, design principles and preparation methods, and optical properties and sensing applications of zero-dimensional carbon nanomaterials. Recent interesting breakthroughs in the sensitive and selective sensing and imaging of heavy metal pollutants, hazardous substances, and bioactive molecules as well as applications in information encryption, super-resolution and photoacoustic imaging, and phototherapy and nanomedicine delivery are the main focus of this review. Finally, future challenges and prospects of these materials are highlighted and envisaged. This review presents a comprehensive basis and directions for designing, developing, and applying fascinating fluorescent sensors fabricated based on zero-dimensional carbon nanomaterials for specific requirements in numerous research fields.

Synthesis, properties and mechanism of carbon dots-based nano-antibacterial materials

Antibiotics play an important role in the treatment of diseases, but bacterial resistance caused by their widespread and unreasonable use has become an urgent problem in clinical treatment. With the rapid advancement of nanoscience and nanotechnology, the development of nanomedicine has been transformed into a new approach to the problem of bacterial resistance. As a new type of carbon-based nanomaterial, carbon dots (CDs) have attracted the interest of antibacterial researchers due to their ease of preparation, amphiphilicity, facile surface functionalization, and excellent optical properties, among other properties. This article reviewed the synthesis methods and properties of various CDs and their composites in order to highlight the advancements in the field of CDs-based antibacterial agents. Then we focused on the relationship between the principal properties of CDs and the antibacterial mechanism, including the following: (1) the physical damage caused by the small size, amphiphilicity, and surface charge of CDs. (2) Photogenerated electron transfer characteristics of CDs that produce reactive oxygen species (ROS) in themselves or in other compounds. The ability of ROS to oxidize can lead to the lipid peroxidation of cell membranes, as well as damage proteins and DNA. (3) The nano-enzyme properties of CDs can catalyze reactions that generate ROS. (4) Synergistic antibacterial effect of CDs and antibiotics or other nanocomposites. Finally, we look forward to the challenges that CDs-based nanocomposites face in practical antibacterial applications and propose corresponding solutions to further expand the application potential of nanomaterials in the treatment of infectious diseases, particularly drug-resistant bacterial infections.

Glyphosate Separating and Sensing for Precision Agriculture and Environmental Protection in the Era of Smart Materials

The present article critically and comprehensively reviews the most recent reports on smart sensors for determining glyphosate (GLP), an active agent of GLP-based herbicides (GBHs) traditionally used in agriculture over the past decades. Commercialized in 1974, GBHs have now reached 350 million hectares of crops in over 140 countries with an annual turnover of 11 billion USD worldwide. However, rolling exploitation of GLP and GBHs in the last decades has led to environmental pollution, animal intoxication, bacterial resistance, and sustained occupational exposure of the herbicide of farm and companies' workers. Intoxication with these herbicides dysregulates the microbiome-gut-brain axis, cholinergic neurotransmission, and endocrine system, causing paralytic ileus, hyperkalemia, oliguria, pulmonary edema, and cardiogenic shock. Precision agriculture, i.e., an (information technology)-enhanced approach to crop management, including a site-specific determination of agrochemicals, derives from the benefits of smart materials (SMs), data science, and nanosensors. Those typically feature fluorescent molecularly imprinted polymers or immunochemical aptamer artificial receptors integrated with electrochemical transducers. Fabricated as portable or wearable lab-on-chips, smartphones, and soft robotics and connected with SM-based devices that provide machine learning algorithms and online databases, they integrate, process, analyze, and interpret massive amounts of spatiotemporal data in a user-friendly and decision-making manner. Exploited for the ultrasensitive determination of toxins, including GLP, they will become practical tools in farmlands and point-of-care testing. Expectedly, smart sensors can be used for personalized diagnostics, real-time water, food, soil, and air quality monitoring, site-specific herbicide management, and crop control.

Solvothermal synthesis of bifunctional carbon dots for tartrazine and Fe(III) detection from chamomile residue by ternary DES pretreatment

A ternary deep eutectic solvent (DES) consisting of choline chloride, lactic acid, and urea in a molar ratio of 1:2:2 was used to pretreat chamomile residue, followed by carbon dots (CDs) preparation using a one-pot solvothermal method. The CDs prepared under the suitable conditions had a high quantum yield of 47.34% and could be used as a bifunctional fluorescent probe for the detection of tartrazine and Fe(III). The concentration of tartrazine or Fe(III) had a good linear relationship with the fluorescence intensity of CDs that the determination coefficient (R²) was 0.9957 and 0.9943, and the limit of detection (LOD) was 40 nM and 119 nM, respectively. After verifying the different fluorescence quenching mechanisms of CDs by these two substances, a quantitative analysis was performed on real samples with recoveries of 90.70%∼104.29%. Overall, this study provided a promising technology for chemical conversion from low-cost chamomile residue to attractive bifunctional fluorescent probe.

Selective detection of nitenpyram by silica-supported carbon quantum dots

In this study, a fluorescent sensor of nitrogen-doped carbon quantum dots (N-CQDs) and silica gel hybrid was developed for the quantitative detection of nitenpyram, a toxic neonicotinoid existing in groundwater and/or surface water.The prepared N-CQDs@SiO₂ sensor exhibited remarkable sensing selectivity and sensitivity towards nitenpyram among the four pesticides and six metal ions. A prominent fluorescence quenching of N-CQDs@SiO₂ at 445 nm was observed in the presence of nitenpyram with a linear response range of 0-300.0 mg L^-1 and an estimated limit of detection of 1.53 mg L^-1. The main cause for selective sensing is that nitenpyram absorbs the excitation light of N-CQDs@SiO₂, leading to fluorescence quenching of the sensor through the inner filter effect.

Recent developments in carbon dots: a biomedical application perspective

Recently, newly developed carbon-based nanomaterials known as carbon dots (CDs) have generated significant interest in nanomedicine. However, current knowledge regarding CD research in the biomedical field is still lacking. An overview of the most recent development of CDs in biomedical research is given in this review article. Several crucial CD applications, such as biosensing, bioimaging, cancer therapy, and antibacterial applications, are highlighted. Finally, CD-based biomedicine's challenges and future potential are also highlighted to enrich biomedical researchers' knowledge about the potential of CDs and the need for overcoming various technical obstacles.

A ratiometric fluorescence sensor for tetracycline detection based on two fluorophores derived from Partridge tea

Blue fluorescent carbon dots (PCDs) were prepared by hydrothermal method with Partridge tea. The ethanol extract of Partridge tea (PEE) was found to emit red fluorescence. Thus, a novel ratiometric sensor was constructed by simply mixing the two fluorophores derived from Partridge tea. The presence of tetracycline (TET) at lower concentrations enhanced the emission peak at 508 nm of PCDs and had a negligible effect on the emission peak at 680 nm of PEE. TET at higher concentrations led to  quenching  both the fluorescence of PCDs and PEE via inner filter effect and fluorescence resonance energy transfer, separately. Good linearities for the detection of TET were obtained in the ranges 0.67 to 15.00 μM and 33.33 to 266.67 μM, with limit of detection of 0.095 μM. The sensor was successfully applied to detect TET in lake water and milk samples with good recoveries ranging from 93.27 ± 4.04% to 107.30 ± 6.16%. This study provided a simple, selective, sensitive, rapid, and environmentally friendly method of monitoring TET residues in the environment and food.

Acidic pH and thiol-driven homogeneous cathodic electrochemiluminescence strategy for determining the residue of organophosphorus pesticide in Chinese cabbage

Electrochemiluminescent (ECL) sensors for organophosphorus pesticides (OPs) have received considerable attention, whereas complicated electrode's immobilization, response to single hydrolysate and anodic emission correlated with ECL assays restrict their potential utilization. Herein, we developed a homogeneous dual-response cathodic ECL system for highly sensitive and reliable analysis of OP using CdTe QDs as emitters. CdTe QDs, emitting red light, were fabricated through a hydrothermal reaction and generated anodic and cathodic ECL emission upon stimulation of tripropyl amine and K₂S₂O₈, respectively. Notably, CdTe QDs-K₂S₂O₈ showed a simultaneous response to thiol and acidic pH, and were regarded as a ECL sensor for methidathion with limit of detection of 0.016 ng/mL based on hydrolysis of acetylthiocholine into thiocholine and CH₃COOH by acetylcholinesterase (AChE) and OPs' inhibition on AChE activity. This sensor also exhibited good practicability to detect methidathion in Chinese cabbage. Overall, the sensor will supply more useful information for ensuring OPs-related food safety.

Carbon nanomaterials for the detection of pesticide residues in food: A review

In agricultural fields, pesticides are widely used, but their residual presence in the environment poses a threat to humans, animals, insects, and ecosystems. The overuse of pesticides for pest control, enhancement of crop yield, etc. leaves behind a significant residual amount in the environment. Various robust, reliable, and reusable methods using a wide class of composites have been developed for the monitoring and controlling of pesticides. Researchers have discovered that carbon nanomaterials have a wide range of characteristics such as high porosity, conductivity and easy electron transfer that can be successfully used to detect pesticide residues from food. This review emphasizes the role of carbon nanomaterials in the field of pesticide residue analysis in different food matrices. The carbon nanomaterials including carbon nanotubes, carbon dots, carbon nanofibers, graphene/graphene oxides, and activated carbon fibres are discussed in the review. In addition, the review examines future prospects in this research area to help improve detection techniques for pesticides analysis.

Carbon dots-based nanomaterials for fluorescent sensing of toxic elements in environmental samples: Strategies for enhanced performance

Rapid industrialization and manufacturing expansion have caused heavy metal pollution, which is a critical environmental issue faced by global population. In addition, the disadvantages presented by conventional detection methods such as the requirement of sophisticated instruments and qualified personnel have led to the development of novel nanosensors. Recently, carbon dots (CDs) have been presented as a multifunctional nanomaterial alternative for the accurate detection of heavy metal ions in water systems. The capacity of CDs to detect contaminants in wastewater -including heavy metals- can be found in the literature; however, to the best of our knowledge, none of them discusses the most recent strategies to enhance their performance. Therefore, in this review, beyond presenting successful examples of the use of CDs for the detection of metal ions, we further discuss the strategies to enhance their photoluminescence properties and their performance for environmental monitoring. In this manner, strategies such as heteroatom-doping and surface passivation are reviewed in detail, as well as describing the mechanisms and the effect of precursors and synthesis methods. Finally, the current challenges are described in detail to propose some recommendations for further research.

General Method for Pesticide Recognition Using Albumin-Based Host-Guest Ensembles

The massive use of pesticides nowadays has led to serious consequences for the environment and public health. Fluorescence analytical methods for pesticides are particularly advantageous with respect to simplicity and portability; however, currently available fluorescence methods (enzyme-based assays and indicator displacement assays) with poor universality are only able to detect few specific pesticides (e.g., organophosphorus). Making use of the multiple flexible and asymmetrical binding sites in albumin, we herein report a set of multicolor albumin-based host-guest ensembles. These ensembles exhibit a universal but distinctive fluorescent response to most of the common pesticides and allow array-based identification of pesticides with high accuracy. Furthermore, the simplicity, portability, and visualization of this method enable on-site determination of pesticides in a practical setting. This albumin host strategy largely expands the toolbox of traditional indicator displacement assays (synthetic macrocycles as hosts), and we expect it to inspire a series of sensor designs for pesticide detection.

Dye-Encapsulated Lanthanide-Based Metal-Organic Frameworks as a Dual-Emission Sensitization Platform for Alachlor Sensing

As an important factor affecting global agricultural output, pesticides have a significant impact on the ecosystem. It is an urgent task to accurately and conveniently detect pesticide residues after their application. Herein, a fluorescent dye@MOF platform was designed via the encapsulation of rhodamine B (RhB) into the MOF structure (named RhB@HNU-48), which can significantly enhance the sensing sensitivity of alachlor with an ultralow detection limit of 0.59 ppb. The improved sensitivity of RhB@HNU-48 to pesticides was attributed to the host-guest interactions that affect the excitation and emission spectra of the composites. Based on the sensing capability of RhB@HNU-48, a logic gate was built to evaluate the safety level of alachlor residues in rivers and soil. The preparation of photofunctionalized MOF composites through modulation of host-guest interactions offers a promising strategy for the construction of desired sensors for agricultural residues.

Recent Advances in Synthesis, Modification, Characterization, and Applications of Carbon Dots

Although there is significant progress in the research of carbon dots (CDs), some challenges such as difficulty in large-scale synthesis, complicated purification, low quantum yield, ambiguity in structure-property correlation, electronic structures, and photophysics are still major obstacles that hinder the commercial use of CDs. Recent advances in synthesis, modification, characterization, and applications of CDs are summarized in this review. We illustrate some examples to correlate process parameters, structures, compositions, properties, and performances of CDs-based materials. The advances in the synthesis approach, purification methods, and modification/doping methods for the synthesis of CDs are also presented. Moreover, some examples of the kilogram-scale fabrication of CDs are given. The properties and performance of CDs can be tuned by some synthesis parameters, such as the incubation time and precursor ratio, the laser pulse width, and the average molar mass of the polymeric precursor. Surface passivation also has a significant influence on the particle sizes of CDs. Moreover, some factors affect the properties and performance of CDs, such as the polarity-sensitive fluorescence effect and concentration-dependent multicolor luminescence, together with the size and surface states of CDs. The synchrotron near-edge X-ray absorption fine structure (NEXAFS) test has been proved to be a useful tool to explore the correlation among structural features, photophysics, and emission performance of CDs. Recent advances of CDs in bioimaging, sensing, therapy, energy, fertilizer, separation, security authentication, food packing, flame retardant, and co-catalyst for environmental remediation applications were reviewed in this article. Furthermore, the roles of CDs, doped CDs, and their composites in these applications were also demonstrated.

Temperature-Responsive Covalent Organic Framework-Encapsulated Carbon Dot-Based Sensing Platform for Pyrethroid Detection via Fluorescence Response and Smartphone Readout

In this paper, carbon dot (CD)-encapsulated 1,3,5-tris(4-formylphenyl)benzene (TFB)/2,5-dihydroxyterephthalohydrazide (DHTH) covalent organic frameworks (TDCOFs) grafted with thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) (CDs@TDCOFs@PNIPAM) were fabricated for the detection of pyrethroids. CDs@TDCOFs@PNIPAM achieved a temperature-responsive "on/off" detection of pyrethroids based on the target-triggered electron-transfer mechanism. The detection limit of pyrethroids was as low as 0.69 μg/L in the wide linear range of 5-400 μg/L (R² > 0.9523). Simultaneously, CDs@TDCOFs@PNIPAM with red, green, and blue (RGB) fluorescence emissions were integrated with a smartphone-assisted device, enabling the visual smart quantitative detection of pyrethroids with a detection limit of 4.875 μg/L. Ultimately, agricultural products were chosen as actual samples to verify the applicability of both recognition modes, and the calculated recovery rate was 105.48-113.40%. Accordingly, CDs@TDCOFs@PNIPAM featuring temperature-responsive switching behavior and RGB fluorescence emission provided a promising analytical strategy for ensuring agricultural and food safety.

Bottom-up synthesized crystalline boron quantum dots with nonvolatile memory effects through one-step hydrothermal polymerization of ammonium pentaborane and boric acid

Crystalline BQDs are synthesized through a bottom-up strategy and used to fabricate a BQD–PVP memory device with nonvolatile rewritable memory effects.