Kinetics and mechanism of synergistic adsorption and persulfate activation by N-doped porous carbon for antibiotics removals in single and binary solutions

Study on the biodegradation characteristics and mechanism of tetracycline by Serratia entomophila TC-1

Microbial degradation is an important solution for antibiotic pollution in livestock and poultry farming wastes. This study reports the isolation and identification of the novel bacterial strain Serratia entomophila TC-1, which can degrade 87.8 % of 200 mg/L tetracycline (TC) at 35 °C, pH 6.0, and an inoculation amount of 1 % (v/v). Based on the intermediate products, a possible biological transformation pathway was proposed, including dehydration, oxidation ring opening, decarbonylation, and deamination. Using Escherichia coli and Bacillus subtilis as biological indicators, TC degraded metabolites have shown low toxicity. Whole-genome sequencing showed that the TC-1 strain contained tet (d) and tet (34), which resist TC through multiple mechanisms. In addition, upon TC exposure, TC-1 participated in catalytic and energy supply activities by regulating gene expression, thereby playing a role in TC detoxification. We found that TC-1 showed less interference with changes in the bacterial community in swine wastewater. Thus, TC-1 provided new insights into the mechanisms responsible for TC biodegradation and can be used for TC pollution treatment.

Highly effective degradation of ibuprofen by alkaline metal-doped copper oxides via peroxymonosulfate activation: Mechanisms, degradation pathway and toxicity assessments

Redox ratios of Cu2+/Cu+ and adsorbed oxygen species (Oads) have shown great activity toward radical generation by activating peroxymonosulfate (PMS). Herein, different alkaline metal oxides (CaO, MgO and BaO) and various amounts of CaO are incorporated into CuO, which could tune the main active sites of redox ratios of Cu2+/Cu+ and Oads. The results show that CaO-CuO-5% exhibits the outstanding performance of PMS activation toward ibuprofen (IBF) degradation with excellent kinetics (k = 0.812 min-1). The X-ray absorption spectroscopy (XAS) and density functional theory (DFT) calculation show that the CaO-CuO-5% has the higher electron density with superior electron transfer ability and lower PMS adsorption energy. Based on radical scavengers and electron paramagnetic resonance spectrometer (EPR), a nonradical process is proposed to play the dominant role. The degradation pathway and the corresponding toxicity of degraded intermediates with residue PMS after reaction is evaluated by LC-MS/MS and bioassay experiments, indicating the lower antagonistic influence on human hormone receptors after advanced oxidation process. Mitigation of the Cu leaching with cyclic stability can be achieved. This study provides a facile method to optimize high-performance catalysts to activate PMS and offer practical environmental applications in the remediation of emerging contaminants.

Polydopamine-modified MOF-5-derived carbon as persulfate activator for aniline aerofloat degradation

Residual flotation chemicals in beneficiation wastewater seriously threaten local ecosystems, such as groundwater or soil, and must be treated effectively. Currently, the degradation of organic pollutants using nitrided MOFs-derived carbon to activate persulfate (PDS) has attracted considerable attention. Hence, we developed a new synthetic strategy to load dopamine hydrochloride (PDA) onto MOF-5-derived porous carbon (PC) to form NPC, and the degradation of a typical flotation Aniline aerofloat (AAF) at high salinity by a low dose of the NPC/PDS system was investigated. Several characterization analyses such as TEM, XRD, Raman, FT-IR and XPS demonstrated that the nitrogen-rich indolequinone unit in PDA provided nitrogen to PC during the pyrolysis process. This enabled the core-shell structure of NPC and the synergy among the multiple components to induce the AAF degradation by PDS over a wide pH scale in a short period of time. It was deduced that the degradation of AAF by the NPC-8/PDS system was a non-radical pathway dominated by 1O2, which relied mainly on the conversion of superoxide radicals (O2•-) and surface-bound radicals. Among them, the pyridine N in the sp2 hybrid carbon was considered as a possible active site. This non-radical pathway was resistant to pH changes and background substances in the water, and well overcame the inhibition of the reaction by natural organic substances and inorganic anions in natural water. In this study, A novel approach to the synthesis of homogeneous MOFs nuclear-derived porous carbon was proposed and the application of MOFs-derived porous carbon for AAF remediation of mineral processing wastewater was broadened.

Ultrasonically assisted hydrothermal synthesis of tungsten(VI) oxide-TiO2 nanocomposites for enhanced photocatalytic degradation of non-narcotic drug paracetamol under natural solar light: insights into degradation pathway, mechanism, and toxicity assessment

Photocatalytic degradation of pharmaceutical residues through natural solar radiation represents a green and economical treatment process. In this work, ultrasonically assisted hydrothermal synthesis of WO3-TiO2 nanocomposite was carried out at 140-150 °C for 5 h and calcinated at 600 °C. The structural and optical properties of the synthesized material were investigated using techniques like XRD, FESEM/EDX, HRTEM, BET surface area, UV-DRS optical analysis, and photocurrent response. The band gap of TiO2 was successfully reduced from 3.0 to 2.54 eV and thus making it effective under solar light. Complete degradation of paracetamol (50 ppm and natural pH of 6.5) was achieved in 3.5 h under natural sunlight at catalyst dose of 0.5 g/l. The extent of mineralization was evaluated by measuring the COD reduction. Based on the degradation products identified by GC-MS/LC-TOF-MS, the degradation process under natural solar-light could be interpreted to initiate through OH. radical species. The toxicity removal of the treated paracetamol solution under natural solar-light was evaluated by the seed germination test using Spinacia oleracea seeds and exhibited 66.70% seed germination, confirming the reduction in toxicity. The enhanced photocatalytic efficiency of the nanocomposite is attributed to the higher surface area, low rutile content, lower band gap, and incorporation of WO3, which led to an extended absorption range and a slower rate of electron-hole recombination. The technical insights presented in this research offer a feasible approach for utilizing natural solar light driven photocatalysis for wastewater treatment in an efficient and sustainable way. The proposed degradation pathway, and seed germination test (toxicity removal) of the treated paracetamol solution under natural sunlight, has not been previously evaluated.

Targeted NO Oxidation and Synchronous NO2 Inhibition via Oriented 1O2 Formation Based on Lewis Acid Site Adjustment

An appealing strategy for ensuring environmental benefits of the photocatalytic NO oxidation reaction is to convert NO into NO3- instead of NO2, yet the selectivity of products remains challenging. Here, such a scenario could be realized by tailoring the exposure of Lewis acid sites on the surface of ZrO2, aiming to precisely regulate the ROS evolution process for the selective oxidation of NO into NO3-. As evidenced by highly combined experimental characterizations and density functional theory (DFT) simulations, Lewis acid sites serving as electron acceptors could induce itinerant electron redistribution, charge-carrier transfer, and further oxidation of •O2-, which promotes the oriented formation of 1O2. As a result, monoclinic ZrO2 with more Lewis acid sites exhibited an outstanding NO conversion efficiency (56.33%) and extremely low NO2 selectivity (5.04%). The ROS-based reaction process and promotion mechanism of photocatalytic performance have been revealed on the basis of ESR analysis, ROS-quenching experiments, and in situ ROS-quenching DRIFTS. This work could provide a critical view toward oriented ROS formation and advance a unique mechanism of selective NO oxidation into NO3-.

Characterization and Adsorption Capacity of Modified Biochar for Sulfamethylimidine and Methylene Blue in Water

In this study, a composite of pond mud and lanthanum- and nano-zero valent iron-modified-biochar was investigated for its ability to adsorb methylene blue (MB) and sulfamethazine (SMZ). La-modified attapulgite and nano-zero valent iron (surface area enhanced by 43.7% via Brunauer-Emmett-Teller analysis) were successfully loaded onto the straw-sediment biochar (BC) surface. With the increase in pyrolysis temperature, the biocompatibility yield, the H, O, and N content, and the ratio of carbon elements decreased, while the pH value, surficial micropores, C element, and ash content increased. The biocarbon small molecules were gradually and tightly ordered, and the organic groups such as hydroxyl, carboxyl groups, and carbon oxygen double bonds were gradually lost or disappeared. The original Fe-BC had more phenolic hydroxyl groups forming an intermolecular hydrogen bond than others with a higher adsorption capacity possibly through the Schiff base reaction. The effect of various pH (2-9), temperature (15-35 °C), and initial concentration (1-25 mg L-1) on adsorption was investigated. pH and temperature were the main factors governing the adsorption process. The maximum adsorption capacity was observed at pH 4. The adsorption performances for MB followed the order Fe-BC > La-BC > BC, and the maximum removal rate was over 98.45% with pH = 7. The three types of BC dosages between 0.2 (6.67 g L-1) and 0.4 g showed a removal rate of 99% for MB. The adsorption capacity of Fe-BC, La-BC, and BC for MB was 2.201, 1.905, and 2.401 mg L-1 with pH = 4, while 4.79, 4.58, and 5.55 mg g-1 were observed with BC dosage at 0.025 g. For SMZ, the higher the temperature, the better the adsorption effect, and it reaches saturation at approximately 25 °C. To further evaluate the nature of adsorption, Langmuir/Freundlich/Temkin models were tested and the adsorption capacities were evaluated on the surface of the BC composite. The three modified materials were physisorbed to SMZ, while MB was chemisorbed. For MB, the adsorption performance of BC is the best < 0.2 g (6.67 g L-1) at pH 7.0 at 35 °C. The Elovich model was more suitable for MB, while the Freundlich and Temkin models could better fit the adsorption process of MB. The preparatory secondary dynamics equation and Langmuir equation were more compliant for SMZ, and the saturated adsorption capacities of straw-modified, La-BC, and Fe-BC reached 5.699, 6.088, and 5.678 mg L-1, respectively.

3D porous carbon-embedded nZVI@Fe2O3 nanoarchitectures enable prominent performance and recyclability in antibiotic removal

Overcoming the instability and poor recyclability during the practical applications of contaminant scavengers is a challenging topic. Herein, a three-dimensional (3D) interconnected carbon aerogel (nZVI@Fe₂O₃/PC) embedding a core-shell nanostructure of nZVI@Fe₂O₃ was elaborately designed and fabricated via an in-situ self-assembly process. The porous carbon with 3D network architecture exhibits strong adsorption towards various antibiotic contaminants in water, where the stably embedded nZVI@Fe₂O₃ nanoparticles not only serve as magnetic seeds for recycling, but also avoid the shedding and oxidation of nZVI in the adsorption process. As a result, nZVI@Fe₂O₃/PC efficiently captures sulfamethoxazole (SMX), sulfamethazine (SMZ), ciprofloxacin (CIP), tetracycline (TC) and other antibiotics in water. In particular, an excellent adsorptive removal capacity of 329 mg g^-1 and a rapid capture kinetics (99% of removal efficiency in 10 min) under a wide pH adaptability (2-8) are achieved using nZVI@Fe₂O₃/PC as an SMX scavenger. nZVI@Fe₂O₃/PC displays exceptional long-term stability given that it shows excellent magnetic property after it is stored in water solution for 60 d, making it an ideal stable scavenger for contaminants in an etching-resistant and efficient manner. This work would also provide a general strategy to develop other stable iron-based functional architectures for efficient catalytic degradation, energy conversion and biomedicine.

Biomass derived reduced-graphene-oxide supported α-Fe2O3/ZnO S-scheme heterostructure: Robust photocatalytic wastewater remediation

The emergence of new diseases and the unplanned industrialization of cities have led to new diseases and the subsequent use of antibiotics. Hence the remediation of wastewater containing antibiotics and their severe pollution has raised serious concerns in recent years. Herein coral-shaped α-Fe₂O₃/ZnO/reduced graphene oxide (r-GO)-like carbon heterojunction in-situ were prepared from basil seed as a sustainable biomass resource and applied for the photodegradation of the oxytetracycline (OTC) as a typical antibiotic in a helical plug flow photoreactor (HPFPR) via persulfate activation under visible light irradiation. Spectroscopy and electrochemical results confirmed the tunable band structure and quick light absorption, superior charge separation and transfer, satisfactory charge carrier lifetime, and long-term stability for the prepared photocatalyst. The 98% degradation efficiency was achieved for OTC within 90 min fitted by a first-order kinetic model with the rate constant of 0.1248 min^-1. The finding proves that HPFPR exhibited a higher degradation rate of OTC by 2.3 times compared to the batch reactor. The 3D computational fluid dynamics (CFD) model confirmed the outstanding performance of the HPFPR. Scavenging experiments integrated with mott Schottky and DRS results revealed that rGO intensifies the S-scheme charge carrier transfer and built-in electric field and reduces the recombination. Finally, this work has substantial potential for the in-situ synthesis of environmental-friendly and large-scale metal oxide heterojunctions in natural carbon supports as well as scale-up and gives novel insights from molecular and engineering points of view into the wastewater remediation processes and clean water production.

Non-toxic and biodegradable κ-carrageenan/ZnO hydrogel for adsorptive removal of norfloxacin: Optimization using response surface methodology

Antibiotic resistance is increasing globally due to increased prescription and easy dispensing of antibiotic drugs universally. Hence, to mitigate this effect, efficient, biodegradable, and non-toxic adsorbents are required to be developed. Carrageenan (CG), a natural polymer, having multiple functional groups, provides a backbone for crosslinking with borax and incorporation of ZnO nanoparticles that formed borax-cross-linked κ-carrageenan (CG/Bx/ZnO) hydrogel which is used for efficient adsorption of norfloxacin from water. Surface morphology of as-synthesized hydrogel revealed the rough surface, which was determined by FESEM. Surface area of CG/Bx/ZnO hydrogel was found to be 22.90 m²/g with 3.41 nm pore radius. Systematic batch adsorption studies revealed that 99.4 % removal efficiency could be achieved at a dosage level of 20 mg/L of norfloxacin with 10 mg of hydrogel at pH of 4 in 8 h at room temperature. Experimentally optimized key parameters affecting the overall efficiency of adsorption matched well with the results assessed from ANOVA using Box-Behnken composite design model. The adsorption process was well fitted with the pseudo-second-order model and Langmuir isotherm with 1282.05 mg/g adsorption capacity. Thermodynamic study results show that adsorption is spontaneous and endothermic. The CG/Bx/ZnO hydrogel demonstrated excellent repeatability with minimal loss in norfloxacin adsorption for seven cycles.

Enhanced persulfate activation by nitrogen-doped mesoporous carbon for efficiently degrading organic matters

Nitrogen-doped carbon materials (NMC) are widely used in peroxymonosulfate-based advanced oxidation processes (PMS-AOPs). Despite great efforts to improve the specific surface area of and the content of N atoms in catalysts for enhancing catalytic performance, this does not mean that the catalytic performance will improve with the increasing specific surface area and nitrogen content. Therefore, it is the key to optimize pore structure of NMC for maximizing the catalytic performance of nitrogen active sites. Herein, we synthesized the NMC as an efficient catalyst to activate PMS for the phenol removal. It can be found that the mesopore structure significantly accelerated the diffusion of reactants and might build the spatial confinement effect to improve the utilization of short life free radicals for further improving the removal efficiency. The removal efficiency of 1NMC750 (95%) with abundant mesopore channels was much higher than that of 1NMC750-0F127 (20%) with abundant micropore channels. Furthermore, the mechanism was confirmed to be radical (SO₄^•-, •OH) and non-radical (¹O₂, electron transfer) pathways. This study proposed a new insight for improving the catalytic performance of carbon materials by coordinating the pore structure.

Insight into catalytic activation of bisulfite for lomefloxacin degradation by simple composite of calcinated red mud

Antibiotic was detected in many environments, and it had posed a serious threat to human health. The advanced oxidation process has been considered an effective way to treat antibiotics. In this work, using industrial waste red mud (RM) as raw material, a series of modified RM (MRM-T; T donates the calcination temperature) was obtained via a facile calcination method and applied to activate sodium bisulfite (NaHSO₃) for the lomefloxacin (LOM) degradation. Among all MRM-T, MRM-700 exhibited superior catalytic activity, and approximately 89% of LOM (10 mg/L) was degraded at 30 min through the activation of NaHSO₃ ([NaHSO₃] = 0.5 g/L) by MRM-700 ([MRM-700] = 0.9 g/L). Moreover, the kinetic constant of LOM removal in the MRM-700/NaHSO₃ system (0.082 min^-1) was 16.4 times higher than that of the RM-raw/NaHSO₃ system (0.005 min^-1). The as-synthesized product of MRM-700 was characterized by N₂ adsorption-desorption isotherms, X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and Raman spectra. The result indicated that the catalyst possessed excellent pore structure, high specific area, and abundant Fe³⁺ sites, and the lattice of Fe₂O₃ was doped after calcination, both of which were favorable for the activation of NaHSO₃. The quenching experiment proved that •SO₄^- and •OH^- active species were produced in MRM-700/NaHSO₃ system, and •SO₄^- played a dominant role in LOM removal. In addition, the potential LOM degradation pathway was analyzed via UPLC-MS technology and density functional theory (DFT) calculation, and the toxicity of the treated LOM solution was tested by the culture of mung bean sprouts. This study not only provided a feasible strategy for the valuable use of RM to activate NaHSO₃ but also offered a cost-effective catalyst for the efficient removal of pollutants in wastewater.

Amorphous NiFe Oxide-based Nanoreactors for Efficient Electrocatalytic Water Oxidation

Synergy engineering is an important way to enhance the kinetic activity of oxygen-evolution-reaction (OER) electrocatalysts. Here, we fabricated NiFe amorphous nanoreactor (NiFe-ANR) oxide as OER electrocatalysts via a mild self-catalytic reaction. Firstly, the amorphousness helps transform NiFe-ANR into highly active hydroxyhydroxides, and its many fine-grain boundaries increase active sites. More importantly, as proved by experiments and finite element analysis, the nanoreactor structure alters the spatial curvature and the mass transfer over the catalyst, thereby enriching OH^- in the catalyst surface and inner part. Thus, the catalyst with the structure of amorphous nanoreactors gained excellent activity, far superior to the NiFe catalyst with the structure of crystalline nanoreactor or amorphous non-nanoreactor. This work provides new insights into the applications and mechanisms of amorphousness and nanoreactors, embodying the "1+1>2" synergy of crystalline state and morphology.

Ultra-trace detection and efficient adsorption removal of multiple water-soluble volatile organic compounds by fluorescent sensor array

Due to the extremely low concentration, complex composition and easy to be converted into each other in water and air of water-soluble volatile organic compounds (VOCs), it is a great challenge to the traditional detection technology, pollution control and traceability, etc. Therefore, developing a convenient, swift and on-site detection method for simultaneous quantification of multiple VOCs is highly anticipated. In this paper, a multifunctional sensor array with adsorption and sensing of VOCs has been constructed by four fluorescence channels of small-sized Eu@Uio-66 and Tb@Uio-66. Due to the obvious cross-reactive characteristics between 4 fluorescence channels and VOCs, the sensor array could detect 8 VOCs simultaneously with all detection limits as low as ppb level. In addition, the detection results of sensor array for actual water samples coexisting with multiple VOCs confirmed that it has strong anti-interference performance and could be used for simultaneous detection of multiple VOCs in real water. The construction of sensor array with VOC adsorption function not only helps to reduce the detection limit of VOCs benefiting from the pre-concentration of materials, but also has significant value to reduce the harmfulness of pollutants. Predictably, this work is of great significance for VOC traceability, analysis of ecotoxicological effects and monitoring of pollution distribution characteristics.

Nitrogen and sulfur dual doped porous carbon as metal-free catalyst for oxidative degradation of 4-nitrophenol by persulfate activation

The replacement of metals in catalytic processes is highly demanded to improve sustainability and economic growth. Poor stability and metal leaching are the main drawbacks of metal-based catalytic reactions. This work represented the use of nitrogen and sulfur-co-doped mesoporous carbon material ((N, S)-MPC) as a metal-free catalyst for the degradation of 4-nitrophenol (4-NP) as a priority pollutant announced by the Environmental Protection Agency through the persulfate-based advanced oxidation process. A low amount of (N, S)-MPC catalyst (0.3 g/L) exhibited superior performance for the degradation of 4-NP within 3 h at room temperature and unadjusted pH. The COD removal was calculated to be 76% using (N, S)-MPC catalyst. Interestingly, the degradations kinetics of 4-NP followed the zero-order kinetics with the rate constant of 0.505 min^-1. The radical quenching experiment was accomplished to investigate the activation pathway of degradation. A real sample from an oil and gas company was treated with the (N, S)-MPC catalyst, which showed excellent total decontamination of 61%. The recyclability and stability of the catalyst have been evaluated for three runs. Owing to the obvious benefits such as high efficiency, metal-free nature, and recyclability, the presented catalyst can improve pollutant removal from aqueous media and practical environmental remediation.

Trinary Component Adsorption of Methylene Blue, Methyl Orange, and Methyl Red from Aqueous Solution Using TiO2/Activated Carbon

Porous TiO2/activated carbon (AC) material was synthesized by grafting peroxo-hydro titanium complexes to rice husk-derived activated carbon. It was found that the morphology of TiO2/AC consists of TiO2 fine particles highly dispersed on the AC matrix. The obtained TiO2/AC composites with high surface area and a red shift exhibit an excellent adsorption performance in both single and trinary system toward methylene blue (MB), methyl orange (MO), and methyl red (MR). The isotherm models including extended Langmuir, P-factor, ideal adsorbed solution theory (IAST) for Langmuir, Freundlich, and Sips models were applied to study the adsorption equilibrium data of trinary solutions. It was found that IAST for Freundlich and Langmuir models were the most suitable one to describe the adsorption of the three dyes on TiO2/AC material. The high maximum adsorption capacities (mmol g-1) in single/trinary mixture were found as 0.452/0.340 for MB; 0.329/0.321 for MO; and 0.806/2.04 for MR. Moreover, the recyclability experiments showed that the adsorbent could be reused through photocatalytic self-cleaning for at least three cycles with stable capacity. Thus, the TiO2/AC can be effectively employed for the removal of dyes from industrial textile wastewater.

Degradation of organic pollutants from water by biochar-assisted advanced oxidation processes: Mechanisms and applications

Biochar has shown large potential in environmental remediation because of its low cost, large specific surface area, porosity, and high conductivity. Biochar-assisted advanced oxidation processes (BC-AOPs) have recently attracted increasing attention to the remediation of organic pollutants from water. However, the effects of biochar properties on catalytic performance need to be further explored. There are still controversial and knowledge gaps in the reaction mechanisms of BC-AOPs, and regeneration methods of biochar catalysts are lacking. Therefore, it is necessary to systematically review the latest research progress of BC-AOPs in the treatment of organic pollutants in water. In this review, first of all, the effects of biochar properties on catalytic activity are summarized. The biochar properties can be optimized by changing the feedstocks, preparation conditions, and modification methods. Secondly, the catalytic active sites and degradation mechanisms are explored in different BC-AOPs. Different influencing factors on the degradation process are analyzed. Then, the applications of BC-AOPs in environmental remediation and regeneration methods of different biochar catalysts are summarized. Finally, the development prospects and challenges of biochar catalysts in environmental remediation are put forward, and some suggestions for future development are proposed.

Bisphenol A removal in treated wastewater matrix at neutral pH using magnetic graphite intercalation compounds as persulfate activators

Effluents of municipal wastewater treatment plants (WWTPs) are major sources for releasing contaminants of emerging concern (CECs) into the aquatic environment, which can result in negative effects on aquatic ecosystems and, as a consequence, on humans. Herein, the graphite intercalation concept was used to synthesize heterogeneous catalysts to degrade bisphenol A (BPA) as a model CEC in municipal WWTP effluents at neutral pH. The catalyst was synthesized using the simple molten salt method and showed several benefits, such as iron leaching prevention and stability in environmental matrices. Different methods were applied to describe the catalyst's structural characteristics. The proposed system removed 99.3% of BPA in 75 min using 2 g/L of the synthesized catalyst and 1.19 g/L (5 mM) persulfate at neutral pH. Quenching experiments showed that catalytic activities and BPA removals were significantly aided by both radical and non-radical pathways through the generation of free radicals and singlet oxygen (¹ O₂ ). Furthermore, the reuse of recycled synthesized catalyst was investigated on treated urban wastewater, and the results showed that the catalyst could degrade BPA from the wastewater in consecutive cycles, demonstrating its applicability under real conditions. PRACTITIONER POINTS: BPA was effectively removed from the effluents of municipal WWTPs at neutral pH. A new catalyst (magnetic GIC) was fabricated for heterogeneous catalytic systems. The catalyst activates persulfate to generate free radicals and ¹ O₂ , indicating that radical and non-radical pathways contribute to BPA degradation. The catalyst showed the ability to remove BPA even in the sixth cycle of use, demonstrating its stability and reusability.

Activated peroxydisulfate by sorghum straw-based biochar for enhanced tartrazine degradation: Roles of adsorption and radical/nonradical processes

Biochar obtained from biomass waste through pyrolysis has significant potential in wastewater treatment due to its large specific surface area and multi-functional active sites. In current study, sorghum straw (SS) was pyrolyzed to prepare various biochar under nitrogen atmosphere. Adsorption kinetics of prepared biochar toward tartrazine (TTZ) was systematically investigated, and the biochar was also characterized by using multiple techniques to explore the contribution of physicochemical properties to adsorption. Then, the biochar with optimum TTZ adsorption performance, was also applied as a catalyst for peroxydisulfate (PDS) activation to degrade TTZ. Factors including PDS concentration, solution pH, and reaction temperature were examined. The optimized degradation rate constant of TTZ (1.1627 min^-1) was achieved under the conditions at 2 mM PDS, pH of 3, and 23 °C. In addition, the free radical trapping experiments and EPR spectra revealed that the reactive substances of electron (e^-), ¹O₂, SO₄^•-, O₂^•-, and •OH contributed to TTZ degradation. Density Functional Theory (DFT) also concluded that the atoms C(6), O(12), N(16), N(17), C(18) and N(22) in TTZ molecule showed larger f⁰ values which are vulnerable to radical attack. Therefore, the synergistic mechanism embodying adsorption and radical/non-radical processes were proposed. Besides, the degradation pathways of TTZ were identified with the aid of HPLC/MS technique, indicating that multiple reaction processes containing the symmetrical cleavage of azo bonds, the asymmetrical cleavage of C-N, desulfonation, and benzene-like structure cracking were involved. Therefore, this study provides a simple and effective catalytic system for TTZ degradation, and also realizes the resource utilization of solid waste.

Heterogeneous catalytic activation of peroxydisulfate toward degradation of pharmaceuticals diclofenac and ibuprofen using scrap printed circuit board

Pharmaceutical residues have been identified as a priority contaminant due to their toxicity to organisms and the ecosystem as representative refractory organic compounds in water. Therefore, using efficient treatment methods to remove them from wastewater has become a crucial topic of research. Advanced oxidation processes (AOPs) based on the sulfate radical have gained increased attention in recent years due to their superior performance and adaptability in the decomposition of refractory organic contaminants. In this work, scrap printed circuit boards (PCBs) were used to prepare a low-cost and efficient heterogeneous peroxydisulfate (PDS) catalytic activator via thermal treatment with an air combustion non-carbonized catalyst (NCC) and pyrolysis with a nitrogen carbonized catalyst (CC) for the removal of diclofenac (DCF) and ibuprofen (IBF) from water at circumneutral pH. The synthesized catalysts were characterized by several analytical techniques. The effects of various experimental parameters on the removal efficiency were examined. Under optimum conditions, the degradation efficiency reached 76% and 71% with NCC and 63% and 57.5% with CC within 60 min for DCF and IBP, respectively. The mineralization efficiency as measured by TOC removal reached up to 65% after 60 min treatment. The degradation kinetics for both catalysts followed the pseudo-first-order model. Results from quenching tests showed that the reactive oxidizing species (ROS), including ¹O₂ > SO₄˙^- > ˙OH, were generated mainly in the NCC/PDS and CC/PDS systems. Overall, the prepared catalysts were found to be effective and reusable for PDS activation for the removal of pharmaceutical pollutants from water. This study provided a promising, robust and efficient heterogeneous catalytic PDS activation based on the strategy of "waste-treats-waste" for the removal of pharmaceutical pollutants from water.

Enhanced photocatalytic organic pollutant degradation and H2 evolution reaction over carbon nitride nanosheets: N defects abundant materials

Post thermal treatment of bulk graphitic carbon nitride (g-C₃N₄) by ammonia gas acts as a significant structure regulation approach, while pure ammonia-assisted g-C₃N₄ synthesis from precursors like melamine is rarely investigated. Here we prove the synthesis of N-defects abundant carbon nitride nanosheets (ACN) through a one-pot thermal polymerization of melamine in pure ammonia gas, for photocatalytic organic pollutant removal in water and H₂ evolution applications. Compared to bulk g-C₃N₄ (BCN), ACN-550 (ACN prepared at 550 °C) exhibited thin-layered porous morphology with higher surface area and abundant N defects, resulting in wider distribution of active sites. Moreover, the abundant N defects in the heptazine heterocycle structure could change the electronic structure of g-C₃N₄, leading to more efficient transport of photogenerated charge carriers and enhanced photoreduction potential, which gives rise to notable improvement activities in photocatalytic reaction. With superoxide ion radical and photoinduced holes as the predominant reactive species, ACN-550 realized efficient photocatalytic bisphenol A (BPA) degradation, which is 1.6- and 4.7-fold high over commercial TiO₂ (P25) and BCN, respectively. ACN-550 exhibited excellent reusability and stability in five consecutive photocatalytic BPA degradation tests. In photo-reductive H₂ production system by ACN-550, 761.8 ± 4.3 μmol/h/g H₂ was produced, which was 11.6-fold as high as that by BCN.

Biodegradation of tylosin in swine wastewater by Providencia stuartii TYL-Y13: Performance, pathway, genetic background, and risk assessment

Microbial bioremediation offers a solution to the problem of residual antibiotics in wastewater associated with animal farms. Efficient degradation of antibiotic residues depends upon the genetic make-up of microbial degraders, which requires a comprehensive understanding of the degradation mechanisms. In this study, a novel, efficient tylosin (TYL)-degrading bacterium, Providencia stuartii TYL-Y13 (Y13) was isolated, which could completely degrade 100 mg/L TYL within 15 h under optimal operating conditions at 40 ℃, pH 7.0 %, and 1 % (v/v) bacterial inoculation rate. Whole genome sequencing revealed that strain Y13 consists of a circular chromosome and two plasmids. A new biodegradation pathway of TYL including desugarification, hydrolysis, and reduction reactions was proposed through the analysis of biodegradation products. It was demonstrated that strain Y13 gradually decreased the biotoxicity of TYL and its metabolites based on the results of the ecological structural activity relationships (ECOSAR) model analysis and toxicity assessment. Moreover, Y13 promoted the reduction of the target macrolide resistance genes in wastewater and disappeared within 84 h. These results shed new light on the mechanism of TYL biodegradation and better utilization of microbes to remediate TYL contamination.

Potential toxic effects of sulfonamides antibiotics: Molecular modeling, multiple-spectroscopy techniques and density functional theory calculations

Sulfonamide antibiotics (SAs) are widely used in medicine, animal husbandry and aquaculture, and excessive intake of SAs may pose potential toxicity to organisms. The toxicological mechanisms of two classical SAs, sulfamerazine (SMR) and sulfamethoxazole (SMT), were investigated by molecular docking, DFT and multi-spectroscopic techniques using HSA and BSA as model proteins. The quenching of HSA/BSA endogenous fluorescence by SMR was higher than that by SMT due to the stronger binding effect of the pyrimidine ring on HSA/BSA compared to the oxazole ring, and that result was consistent with that predicted by DFT calculations. Thermodynamic parameters show that the binding of SAs to HSA/BSA is an exothermic process that proceeds spontaneously (ΔG < 0). Marker competition experiments illustrate that the binding site of SMR/SMT on serum albumin is located in subdomain IIIA. The combination of SAs and HSA/BSA is mainly realized by hydrogen bond and hydrophobic interaction, and the concept is also supported by molecular modeling. The reduced α-helix content of HSA/BSA induced by SMR/SMT indicates a greater stretching of the protein α-helix structure of the SMR/SMT-HSA/BSA. The results could provide useful toxicological information on the hazards of SAs in response to growing concern that SAs may pose a toxic threat to organisms.

Carbon nitride-based Z-scheme heterojunctions for solar-driven advanced oxidation processes

Solar-driven advanced oxidation processes (AOPs) via direct photodegradation or indirect photocatalytic activation of typical oxidants, such as hydrogen peroxide (H₂O₂), peroxymonosulfate (PMS), and peroxydisulfate (PDS), have been deemed to be an efficient technology for wastewater remediation. Artificial Z-scheme structured materials represent a promising class of photocatalysts due to their spatially separated charge carriers and strong redox abilities. Herein, we summarize the development of metal-free graphitic carbon nitride (g-C₃N₄, CN)-based direct and indirect Z-scheme photocatalysts for solar-driven AOPs in removing organic pollutants from water. In the work, the classification of AOPs, definition and validation of Z-schemes are summarized firstly. The innovative engineering strategies (e.g., morphology and dimensionality control, element doping, defect engineering, cocatalyst loading, and tandem Z-scheme construction) over CN-based direct Z-scheme structure are then examined. Rational design of indirect CN-based Z-scheme systems using different charge mediators, such as solid conductive materials and soluble ion pairs, is further discussed. Through examining the relationship between the Z-scheme structure and activity (charge transfer and separation, light absorption, and reaction kinetics), we aim to provide more insights into the construction strategies and structure modification on CN-based Z-schemes towards improving their catalytic performances in AOPs. Lastly, limitations, challenges, and perspectives on future development in this emerging field are proposed.

Rational Regulation of Co-N-C Coordination for High-Efficiency Generation of 1O2 toward Nearly 100% Selective Degradation of Organic Pollutants

Single oxygen-based advanced oxidation processes (¹O₂-AOPs) exhibit great prospects in selective degradation of organic pollutants. However, efficient production of ¹O₂ via tailored design of catalysts to achieve selective oxidation of contaminants remains challenging. Herein, we develop a simple strategy to regulate the components and coordination of Co-N-C catalysts at the atomic level by adjusting the Zn/Co ratio of bimetallic zeolitic imidazolate frameworks (Zn_xCo₁-ZIFs). Zn₄Co₁-C demonstrates 98% selective removal of phenol in the mixed phenol/benzoic acid (phenol/BA) solutions. Density functional theory calculations and experiments reveal that more active CoN₄ sites are generated in Zn₄Co₁-C, which are beneficial to peroxymonosulfate activation to generate ¹O₂. Furthermore, the correlation between the origin of selectivity and well-defined catalysts is systematically investigated by the electron paramagnetic resonance test and quenching experiments. This work may provide novel insights into selective removal of target pollutants in a complicated water matrix.

Enhanced utilization efficiency of peroxymonosulfate via water vortex-driven piezo-activation for removing organic contaminants from water

The efficient activation and utilization of peroxymonosulfate (PMS) in PMS-based advanced oxidation processes is a high-priority target for the removal of organic contaminants. This work introduces a water vortex-driven piezoelectric effect from few-odd-layered MoS₂ into the PMS activation to remove benzotriazole (BTR) and other organic contaminants from the water. Approximately 91.1% of BTR can be removed by the MoS₂ piezo-activated PMS process with a reaction rate constant of 0.428 min^-1, which is 2.09 times faster than the sum of the individual MoS₂, water vortex, and piezocatalysis rates. Meanwhile, the PMS utilization efficiency reached 0.0147 in the water vortex-driven piezo-activation system, which is 3.97 times that of the sum from the vortex/PMS and MoS₂/PMS systems. These results demonstrate that the presence of MoS₂ under a water vortex can trigger a piezoelectric potential and generate abundant free electrons to activate PMS to generate various active species for degradation of organic contaminants.

Magnetic MgFe2O4/biochar derived from pomelo peel as a persulfate activator for levofloxacin degradation: Effects and mechanistic consideration

Biochar (BC) has been demonstrated the potential to activate persulfate (PS), but the limited catalytic efficiencies hindered their further application. Herein, an innovative magnetic MgFe₂O₄/BC (MMB) derived from pomelo peel was prepared for persulfate-based advanced oxidation process (PS-AOPs). Benefitting from the extraordinary properties, levofloxacin (LFX) was efficiently removed in the MMB/PS system. MMB700 exhibited the best catalytic activity, 87.87% of LFX was removed in the MMB700/PS system. In addition, it could maintain 67.90% of LFX degradation efficiency after 3 times of reuse. Quenching experiments, electron spin resonance (ESR) detection, and electrochemical test results indicated that both non-radical pathway and direct electron-transfer pathway advanced LFX degradation. LFX was oxidized by O₂^·- and ¹O₂, O₂^·- acted as the dominant active species. PS activation was induced by the active sites of MMB700. This work not only developed a promising magnetic biochar PS catalyst for antibiotics elimination, but also facilitated insights PS activation mechanisms.

Catalytic degradation of sulfamethoxazole by peroxymonosulfate activation system composed of nitrogen-doped biochar from pomelo peel: Important roles of defects and nitrogen, and detoxification of intermediates

Nitrogen doping could improve the catalytic performance of carbon materials, in which the nitrogen configuration could be used as active sites for peroxymonosulfate (PMS) activation. Herein, this paper studied how to turn waste to "treasure" by agriculture waste pomelo peel to prepare nitrogen-doped biochar and successfully applied it to advanced oxidation field. The effects of the sodium bicarbonate (NaHCO₃), melamine, and pyrolysis temperature on the catalytic activity of biochar for the removal of sulfamethoxazole (SMX) were investigated. The optimized nitrogen-doped biochar (C-N-M 1:3:4) possessed high specific surface area (SSA, 738 m²/g) and high level of nitrogen doping (nitrogen content 13.54 at%). Accordingly, it exhibited great catalytic performance for PMS activation to remove SMX antibiotic, and 95% of SMX was removed within 30 min. High catalytic activity of C-N-M 1:3:4 was attributed to rich defects, carbonyl group, high content of graphitic N and pyrrolic N, and large SSA, in which non-radical oxidation process based on singlet oxygen (¹O₂) and electron transfer contributed to the SMX degradation. The prepared nitrogen-doped biochar possessed high stability and reusability and the removal efficiency of SMX still reached 80% after four cycles. Additionally, the phytotoxicity assay indicated that the toxicity of degradation intermediates was obviously decreased in the PMS/ C-N-M 1:3:4 system.

Structure-Function Correlations of Carbonaceous Materials for Persulfate-Based Advanced Oxidation

Carbonaceous materials (CMs), as high-efficiency activators in a persulfate-based advanced oxidation process (PS-AOP), are attracting increasing attention for environmental remediation due to their high efficiency, low toxicity, and environmental friendliness. The correlations between the structural and surface properties of carbonaceous materials and the catalytic reaction efficiency in PS-AOP have been focused on experimentally and theoretically. In this Perspective, we discuss the effect of the microstructure of carbonaceous materials on the catalytic reaction efficiency, which can depend on the reaction pathways, including adsorption, free-radical routines, and non-free-radical pathways. Various features of carbonaceous materials, covering the dimensionality, pristine carbon configuration, crystallinity, defects, porosity, chemically active groups, and heterogeneous doping, can be involved. Those characteristics mainly affect the electronic process and mass transfer during the whole PS-AOP. An important target in the field is how to rationally regulate the intrinsic properties of carbonaceous substances to control both the reaction pathways and catalytic efficiency. Therefore, we conclude with a critical discussion and presentation of future challenges.

Graphitic carbon nitride nanosheets via acid pretreatments for promoted photocatalysis toward degradation of organic pollutants

Acid treatment serves as an effective engineering strategy to modify the structure of graphitic carbon nitride (g-C₃N₄) for enhanced metal-free photocatalysis, while their lacks a comprehensive understanding about the impacts of different acid species and acid treatment approaches on the intrinsic structure and properties of g-C₃N₄ and structure-activity relationships are ambiguous. Employing inorganic/organic acids including hydrochloric acid (HCl), nitric acid (HNO₃), acetic acid (HAc), sulphuric acid (H₂SO₄), or oxalic acid (H₂C₂O₄) as treatment acids, herein, we compare the impacts of different acid pretreatment approaches on the structure and properties of g-C₃N₄. Due to different acid-melamine interaction modes and the activation roles of various acids, the obtained g-C₃N₄ samples exhibit varied structures, physiochemical properties and photocatalytic activities. Compared with bulk graphitic carbon nitride (BCN), g-C₃N₄ prepared by acid pretreatment show enhanced photocatalytic performance on bisphenol A (BPA) degradation. The photocatalytic degradation rates of BPA by g-C₃N₄ prepared by HNO₃, HAc, H₂SO₄, H₂C₂O₄, or HCl pretreatment are about 2.2, 2.7, 2.8, 3.2 and 3.8 folds faster than that by BCN. HCl pretreatment proves to be the optimal approach, with the derived g-C₃N₄ (HTCN) showing more intact heptazine structural units, and increased specific surface area, which promote the exposure of more active sites, accelerate charge transfer, and give rise to a notable improvement in photocatalysis, eventually. Mechanistic investigations through quenching experiments and electron paramagnetic resonance (EPR) characterization unveil that superoxide ion radical (O₂^-) and photo-induced holes (h⁺) worked principally in the photodegradation reaction. This work provides new insights for the rational selection of acid types and treatment methods to synthesize metal-free carbon nitrides with improved activity for photocatalytic applications.