Layered double hydroxide based materials applied in persulfate based advanced oxidation processes: Property, mechanism, application and perspectives

Recent advances in catalyst design, performance, and challenges of metal-heteroatom-co-doped biochar as peroxymonosulfate activator for environmental remediation

The escalation of global water pollution due to emerging pollutants has gained significant attention. To address this issue, catalytic peroxymonosulfate (PMS) activation technology has emerged as a promising treatment approach for effectively decontaminating a wide range of pollutants. Recently, modified biochar has become an increasingly attractive as PMS activator. Metal-heteroatom-co-doped biochar (MH-BC) has emerged as a promising catalyst that can provide enhanced performance over heteroatom-doped and metal-doped biochar due to the synergism between metal and heteroatom in promoting PMS activation. Therefore, this review aims to discuss the fabrication pathways (i.e., internal vs external doping and pre-vs post-modification) and key parameters (i.e., source of precursors, synthesis methods, and synthesis conditions) affecting the performance of MH-BC as PMS activator. Subsequently, an overview of all the possible PMS activation pathways by MH-BC is provided. Subsequently, Also, the detection, identification, and quantification of several reactive species (such as, •OH, SO4•-, O2•-, 1O2, and high valent oxo species) generated in the catalytic PMS system by MH-BC are also evaluated. Lastly, the underlying challenges associated with poor stability, the lack of understanding regarding the interaction between metal and heteroatom during PMS activation and quantification of radicals in multi-ROS system are also deliberated.

Activation of peroxydisulfate via BiCoFe-layered double hydroxide for effective degradation of aniline

The sulfate radical-based advanced oxidation processes (SR-AOPs) is a promising method for the degradation of pollutants, with the development of highly efficient catalysts for persulfate activation has been widely concerned. The novel BiCoFe-LDH (BCF-x) was synthesized successfully by coprecipitation method, which can activate peroxydisulfate (PDS) efficiently to degrade aniline. Comparative analysis with pure CoFe-LDH revealed a remarkable increase in reaction rate constant by approximately 14.66 times; the degradation rate of aniline (10 mg/L) was 100% in 60 min with the condition of 0.5 g/L BCF-1.5 and 0.5 g/L PDS, due to BCF-1.5 which was characterized as a complex of CoFe-LDH and Bi2O2CO3, promoting electron transport to improve the efficiency of activated PDS. In the reaction system, SO4•-, ·OH, and 1O2 were responsible for the aniline degradation and ·OH was the primary one. Furthermore, this work proposes a reaction electron transfer catalytic mechanism, which provided a new insight and good application prospect for efficient activation of PDS for pollutant degradation.

Vitamin C-regulated CoAl- layered double hydroxide with oxygen vacancies to efficiently activate peroxydisulfate for sulfamethoxazole removal triggered via reactive oxygen and high-valent cobalt species

In this study, a vitamin C-regulated CoAl-layered double hydroxide with abundant oxygen vacancies was synthesized via a simple hydrothermal process. The resulting CoAl-layered double hydroxide was employed to activate peroxydisulfate for removal of sulfamethoxazole. The effect of the experimental parameters such as pH, catalyst dose and peroxydisulfate concentration on sulfamethoxazole removal was investigated. The current system exhibited excellent catalytic performance for sulfamethoxazole removal in a broad pH range (i.e., pH 3.0-11.0). Under the optimized condition, 94.2% of sulfamethoxazole was degraded within 15 min, accompanied by a 67.6% reduction in chemical oxygen demand. The effective sulfamethoxazole degradation could be attributed to four pathways. Firstly, the ≡ Co2+ in catalyst reacted with peroxydisulfate to generate reactive species, including SO4•-, •OH, O2•- and 1O2, which could degrade sulfamethoxazole. Secondly, the oxygen vacancies could modulate intrinsic electrons, resulted in the surface activation of catalyst and accelerated charge transfer, which was favorable for the degradation of sulfamethoxazole. Thirdly, the presence of vitamin C not only promoted the formation of oxygen vacancies but also expanded the interlayer spacing of layered double hydroxide. A large interlayer spacing facilitated the diffusion of peroxydisulfate and pollutants in the interlayer and improved the utilization efficiency of the active site. Lastly, the high-valent cobalt species exhibited excellent oxidation ability and enhanced the catalyst performance through continuously being employed as an electron acceptor. This study provided a valuable insight for the design and application of Co-based catalysts in peroxydisulfate-based advanced oxidation processes.

Peroxymonosulfate activation by Fe-Mn Co-doped biochar for carbamazepine degradation

Antibiotics in aquatic environments present a serious threat to the ecological environment and human health. Activation of carbon-catalyzed persulfate is a prospective approach for oxidizing antibiotics. There is a pressing need for inexpensive carbon catalysts of high quality. In this study, biochar (BC) modified by Fe, Mn and Fe@Mn was employed to activate peroxymonosulfate (PMS) to degrade carbamazepine (CBZ) in water. The surface of Fe@Mn BC had a dense, stalactite-like morphology comprising a square chassis that was elliptical. The catalyst Fe@Mn-BC possessed the optimal degradation effect (99%) on CBZ at 100 min. Electron paramagnetic resonance spectroscopy and the quenching spectrum suggested that ˙O2- and 1O2 contributed to CBZ degradation.

Synergistic enhancement of redox pairs and functional groups for the removal of phenolic organic pollutants by activated PMS using silica-composited biochar: Mechanism and environmental toxicity assessment

In present work, a novel catalyst of cobalt supported on silica-composited biochar (Co@ACFA-BC) derived from fly ash and agricultural waste was synthesized. A series of characterizations confirmed that Co3O4 and Al/Si-O compounds were successfully embedded on the surface of biochar, which triggered superior catalytic activity for PMS activation towards phenol degradation. Particularly, the Co@ACFA-BC/PMS system could completely degrade phenol in the wide pH range, and was almost unaffected by environmental factors including humic acid (HA), H2PO4-, HCO3-, Cl-, and NO3-. Further quenching experiment and EPR analysis proved that both radical (SO4·-, ·OH, O2·-) and non-radical (1O2) pathways were involved in the catalytic reaction system, and the excellent PMS activation was attributed to the electron pair cycling of Co2+/Co3+ and the active sites provided by Si-O-O and Si/Al-O bonds on the catalyst surface. Meanwhile, the carbon shell effectively inhibited the leaching of metal ions, enabling the Co@ACFA-BC catalyst to maintain excellent catalytic activity after four cycles. Finally, biological acute toxicity assay demonstrated that the toxicity of phenol could be significantly reduced after being treated by Co@ACFA-BC/PMS. Overall, this work provides a promising strategy for solid waste valorization and a feasible methodology for green and efficient treatment of refractory organic pollutants in water environment.

Recent Progress of Layered Double Hydroxide-Based Materials in Wastewater Treatment

Layered double hydroxides (LDHs) can be used as catalysts and adsorbents due to their high stability, safety, and reusability. The preparation of modified LDHs mainly includes coprecipitation, hydrothermal, ion exchange, calcination recovery, and sol-gel methods. LDH-based materials have high anion exchange capacity, good thermal stability, and a large specific surface area, which can effectively adsorb and remove heavy metal ions, inorganic anions, organic pollutants, and oil pollutants from wastewater. Additionally, they are heterogeneous catalysts and have excellent catalytic effect in the Fenton system, persulfate-based advanced oxidation processes, and electrocatalytic system. This review ends with a discussion of the challenges and future trends of the application of LDHs in wastewater treatment.

UV-activated persulfates oxidation of anthraquinone dye: Kinetics and ecotoxicological assessment

Sulfate radical-based advanced oxidation processes (SR-AOPs) are gaining popularity as a feasible alternative for removing recalcitrant pollutants in an aqueous environment. Persulfates, namely peroxydisulfate (PDS) and peroxymonosulfate (PMS) are the most common sulfate radical donors. Persulfates activation by ultraviolet (UV) irradiation is considered feasible due to the high concentration of radicals produced as well as the lack of catalysts leaching. The research focuses on determining the impact of activated PDS and PMS on the degradation of anthraquinone dye, i.e., Acid Blue 129 (AB129). UV-activated PDS and PMS can quickly degrade the AB129 as well as restrict the formation of by-products. This could explain the reduced ecotoxicity levels of the treated water after degradation, using an aquatic plant (Lemna minor) and a crustacean (Daphnia magna). This, on the other hand, can ensure that the sulfate radical-based processes can be an environmentally friendly technology.

Construction of ZnIn2S4/MOF-525 heterojunction system to enhance photocatalytic degradation of tetracycline

Zirconium-based porphyrin metal organic frameworks (Zr-PMOFs) had attracted attention in the field of photocatalysis in recent years. However, the recombination of photogenerated carriers of monomer PMOF limits its performance of photocatalytic organic pollutants degradation. Metal sulfide has a suitable visible band gap, which can form a heterojunction with MOF materials to enhance the photocatalytic efficiency of MOF. Therefore, a typical metal sulfide semiconductor ZnIn₂S₄ (ZIS) was introduced into a Zr-MOF (MOF-525) by solvothermal method to prepare a series of ZIS/MOF-525 (ZIS/MOF-525-1, ZIS/MOF-525-2, ZIS/MOF-525-3 and ZIS/MOF-525-4) composite photocatalysts in this work. The results of characterization analysis, optical analysis and electrochemical analysis showed that the interface of ZIS/MOF-525 formed a typical type-II heterojunction, which accelerated the electron transport rate and effectively inhibited the recombination of photogenerated e^- and h⁺ in MOF-525. The optimal removal efficiency of tetracycline (TC) by ZIS/MOF-525-3 (the mass of MOF-525 is 30 mg) reached 93.8% under 60 min visible light illumination, which was greater than that of pure MOF-525 (37.2%) and ZnIn₂S₄ (70.0%), and it still maintained good stability after five cycles reusing experiment. This work provides feasible insight for the preparation of novel and efficient PMOF-based photocatalysts in the future.

A hybrid nanocomposite based on CuFe layered double hydroxide coated graphene oxide for photocatalytic degradation of trimethoprim

Photocatalytic activation of persulfate (PS) has recently been considered an effective and environmentally friendly approach for antibiotic decomposition due to its high treatment efficiency, low energy consumption, and high reliability. The development of safe and high-performance catalysts is important for PS-based advanced oxidation processes. In this study, a CuFe-layered double hydroxide (LDH) coated graphene oxide (CuFe-LDH/GO) composite was constructed as a photocatalyst for trimethoprim (TMP) decomposition. The CuFe-LDH/GO catalyst was prepared via the co-precipitation method and characterized through Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), and X-ray electron microscopy (XPS) techniques. Characterization results revealed that GO was entirely covered by LDH platelets which also kept its hydrotalcite structure in the as-prepared nanocomposite. The average crystallite size of CuFe-LDH/GO was 28.22 nm. The results confirmed that CuFe-LDH/GO exhibited excellent performance for the PS activation with a TMP removal efficiency of 90.8% under UV-light irradiation. Compared with pristine CuFe-LDH, the rate constant of TMP degradation of CuFe-LDH/GO was doubled. The results also indicated that acidic and alkaline conditions were not favorable for TMP degradation, and the catalytic activity of the used photocatalyst has not decreased significantly after 720 h of continuous recycling. Overall, CuFe-LDH/GO could be a promising photocatalyst for the treatment of wastewater containing antibiotics.

Dissolved Organic Matter and Lignin Modulate Aquatic Toxicity and Oxidative Stress Response Activated by Layered Double Hydroxides Nanomaterials

Advanced nanomaterials can be released into the environment and can coexist with natural organic matter (NOM). However, evidence on the impacts of NOM on the environmental behavior and toxicity of advanced nanomaterials is still scarce. Here, we investigated the behavior and toxic effects of two layered double hydroxides (LDHs) nanomaterials with different metallic constituents (Mg-Al-LDH and Zn-Al-LDH) at relatively low exposure concentrations on a freshwater green alga (Chlorella pyrenoidosa) in the absence and presence of two types of NOM, namely dissolved organic matter (DOM) and dealkaline lignin (DL). The DOM or DL interaction with the LDHs at different mixture levels was shown to be an antagonistic effect on the growth inhibition toxicity to C. pyrenoidosa mainly. The estimation of the index of Integrated Biological Responses version 2 indicated that the joint interaction of the LDHs with DOM or DL occurred in the following order of frequency synergism > antagonism > additivity. Furthermore, the physicochemical characteristics of LDHs were crucial for illuminating the mechanism by which the DOM or DL modified the LDH-induced oxidative stress response. These findings highlighted the important role of NOM in the behavior and effect of LDHs as a representative of a new class of multifunctional nanomaterials in the freshwater environment.

Construction of a novel S-scheme heterojunction piezoelectric photocatalyst V-BiOIO3/FTCN and immobilization with floatability for tetracycline degradation

A high-performance piezoelectric photocatalyst (V-BiOIO₃/FTCN) was constructed to improve removal efficiency of tetracycline hydrochloride (TCH). The role of V-BiOIO₃ in the composite was to introduce piezoelectric effect and construct S-scheme heterojunction photocatalyst with fish scale tubular carbon nitride (FTCN). The morphology, structure, chemical composition and optoelectronic characteristics of the as-prepared photocatalysts were studied by SEM, TEM, XRD, XPS and UV-Vis DRS. Combined with UV-Vis DRS, XPS valence band, Mott-schottky curve and theoretical calculations, the mechanism of TCH degradation was deeply analyzed. A series of degradation experiments showed that the V-BiOIO₃/FTCN could effectively degrade TCH, and the removal efficiency was further improved under the action of ultrasound. Importantly, the further immobilized V-BiOIO₃/FTCN/MS could float on the water surface to degrade TCH without additional stirring, which facilitated the recovery of photocatalysts and showed excellent practical application value. This work provided a reference for the design and immobilization of carbon nitride-based piezoelectric photocatalysts.

Advanced oxidation process: a sustainable technology for treating refractory organic compounds present in industrial wastewater

The world faces tremendous challenges and environmental crises due to the rising strength of wastewater. The conventional technologies fail to achieve the quality water that can be reused after treatment means "zero effluent" discharge of the industrial effluent. Therefore, now the key challenge is to develop improved technologies which will have no contribution to secondary pollution and at the same time more efficient for the socio-economic growth of the environment. Sustainable technologies are needed for wastewater treatment, reducing footprint by recycling, reusing, and recovering resources. Advanced oxidation process (AOP) is one of the sustainable emerging technologies for treating refractory organic contaminants present in different industrial wastewaters like textile, paper and pulp, pharmaceuticals, petrochemicals, and refineries. This critical review emerges details of advanced oxidation processes (AOPs), mentioning all possible permutations and combinations of components like ozone, UV, the catalyst used in the process. Non-conventional AOP systems, microwave, ultrasound, and plasma pulse assisted are the future of the oxidation process. This review aims to enlighten the role of AOPs for the mineralization of refractory organic contaminants (ROC) to readily biodegradable organics that cannot be either possible by conventional treatment. The integrated AOPs can improve the biodegradability of recalcitrant organic compounds and reduce the toxicity of wastewater, making them suitable for further biological treatment.

Sulfate radicals-based advanced oxidation processes for the degradation of pharmaceuticals and personal care products: A review on relevant activation mechanisms, performance, and perspectives

Owing to the rapid development of modern industry, a greater number of organic pollutants are discharged into the water matrices. In recent decades, research efforts have focused on developing more effective technologies for the remediation of water containing pharmaceuticals and personal care products (PPCPs). Recently, sulfate radicals-based advanced oxidation processes (SR-AOPs) have been extensively used due to their high oxidizing potential, and effectiveness compared with other AOPs in PPCPs remediation. The present review provides a comprehensive assessment of the different methods such as heat, ultraviolet (UV) light, photo-generated electrons, ultrasound (US), electrochemical, carbon nanomaterials, homogeneous, and heterogeneous catalysts for activating peroxymonosulfate (PMS) and peroxydisulfate (PDS). In addition, possible activation mechanisms from the point of radical and non-radical pathways are discussed. Then, biodegradability enhancement and toxicity reduction are highlighted. Comparison with other AOPs and treatment of PPCPs by the integrated process are evaluated as well. Lastly, conclusions and future perspectives on this research topic are elaborated.

Review and Prospects on the Ecotoxicity of Mixtures of Nanoparticles and Hybrid Nanomaterials

The rapid development of nanomaterials (NMs) and the emergence of new multicomponent NMs will inevitably lead to simultaneous exposure of organisms to multiple engineered nanoparticles (ENPs) at varying exposure levels. Understanding the joint impacts of multiple ENPs and predicting the toxicity of mixtures of ENPs are therefore evidently of importance. We reviewed the toxicity of mixtures of ENPs to a variety of different species, covering algae, bacteria, daphnia, fish, fungi, insects, and plants. Most studies used the independent-action (IA)-based model to assess the type of joint effects. Using co-occurrence networks, it was revealed that 53% of the cases with specific joint response showed antagonistic, 25% synergistic, and 22% additive effects. The combination of nCuO and nZnO exhibited the strongest interactions in each type of joint interaction. Compared with other species, plants exposed to multiple ENPs were more likely to experience antagonistic effects. The main factors influencing the joint response type of the mixtures were (1) the chemical composition of individual components in mixtures, (2) the stability of suspensions of mixed ENPs, (3) the type and trophic level of the individual organisms tested, (4) the biological level of organization (population, communities, ecosystems), (5) the exposure concentrations and time, (6) the endpoint of toxicity, and (7) the abiotic field conditions (e.g., pH, ionic strength, natural organic matter). This knowledge is critical in developing efficient strategies for the assessment of the hazards induced by combined exposure to multiple ENPs in complex environments. In addition, this knowledge of the joint effects of multiple ENPs assists in the effective prediction of hybrid NMs.

Application of persulfate-based oxidation processes to address diverse sustainability challenges: A critical review

Over the past years, persulfate (PS) is widely applied due to their high versatility and efficacy in decontamination and sterilization. While treatment of organic chemicals, remediation of soil and groundwater, sludge treatment, disinfection on pathogen microorganisms have been covered by most published reviews, there are no comprehensive and specific reviews on its application to address diverse sustainability challenges, including solid waste treatment, resources recovery and regeneration of ecomaterials. PS applications mainly rely on direct oxidation by PS itself or the reactive sulfate radical (SO₄^•-) or hydroxyl radical (^•OH) from the activation of peroxodisulfate (PDS, S₂O₈^2-) or peroxymonosulfate (PMS, HSO₅^-) in SO₄^•--based advanced oxidation processes (SO₄^•--AOPs). From a broader perspective of environmental cleanup and sustainability, this review summarizes the various applications of PS except pollutant decontamination and elaborates the possible reaction mechanisms. Additionally, the differences between PS treatment and conventional technologies are highlighted. Challenges, research needs and future prospect are thus discussed to promote the development of the applications of PS-based oxidation processes in niche environmental fields. In all, this review is a call to pay more attention to the possibilities of PS application in practical resource reutilization and environmental protection except widely reported pollutant degradation.

Thiosulfate-assisted Fe2+/persulfate pretreatment effectively alleviating iron dose and enhancing biotransformation of waste activated sludge into high-value liquid products

Ferrous-based acidogenic fermentation (AF) as a means to treat waste activated sludge (WAS) and produce short-chain fatty acids (SCFAs) has drawn increasing attention, but the massive amount of "iron sludge" that it produces not only significantly increases costs and difficulty of disposal but also poses risks to the environment and human health. This study explored a novel approach to not only reduce the iron dosage required by AF but also to improve its performance by introducing a thiosulfate (TS)-assisted Fe²⁺/persulfate (TAFP) pretreatment. Effects of the TAFP pretreatment on WAS disintegration and biodegradability, SCFA production, and microbial community structure with different persulfate-Fe²⁺-thiosulfate molar ratios at 4:4:0 (R1), 4:3:1 (R2), 4:2:2 (R3) and 4:1:3 (R4) were investigated. The results showed that the TAFP pretreatment by a remarkable margin promoted the disintegration of WAS as well as the biodegradability of the organics released, owing to the production of robust free radicals (SO₄•^- and •OH) triggered by the thiosulfate and Fe²⁺ cycles. 48-day AF tests further showed maximum SCFA production, ranging roughly between 1283 and 1395 mg COD/L in the TAFP pretreated samples, much higher than Control (<120 mg/L) and R1 (around 593 mg COD/L). At the meantime, the Fe²⁺ dosage was reduced by 50% in R3 than that of R1. However, a prolonged lag phase of SCFA generation was observed between days 7 and 25, which was ascribable to the acidic conditions (pH < 4.5) closely related to impaired metabolic activities as well as electron transfer efficiencies and limited activities of acidogenic enzymes (i.e., pyruvate-ferredoxin oxidoreductase). Despite such lag phase, the economic and environmental assessment of AF of TAFP-pretreated WAS had a higher net SCFA yield and less "iron sludge" than either without any pretreatment or with Fe²⁺/persulfate-only pretreatment.

The application of transition metal-modified biochar in sulfate radical based advanced oxidation processes

Sulfate radical (SO₄^•-) based advanced oxidation processes (SR-AOPs) is a very important chemical oxidation technology for the degradation of recalcitrant organic pollutants in water and has been well developed. Recently, transition metals or their oxides-modified biochar has been widely used as the catalyst to catalyze peroxymonosulfate (PMS) and peroxydisulfate (PS) in SR-AOPs due to their outstanding properties (e.g., large surface area, high stability, abound catalytic sites, and diversity of material design, etc.). These composite materials not only combine the respective beneficial characteristics of biochar and transition metals (or their oxides) but also often present synergistic effects between the components. In this review, we present the synthesis of different types of transition metal (or metal oxides)/biochar-based catalysts and their application in SR-AOPs. The catalytic mechanism, including the generation process of free radicals and other reaction pathways on the surface of the catalyst were also carefully discussed. Particular attention has been paid to the synergistic effects between the components that result in enhanced catalytic performance. At the end of this review, the future development prospects of this technology are proposed.