1
|
Lee KC, Hsu SC, Huang JH, Wang KS, Pang WK, Hu CW, Jiang YJ, Cho EC, Weng HC, Liu TY. Construction of dual Z-scheme Ag 3VO 4-BiVO 4/InVO 4 photocatalysts using vanadium source from spent catalysts for contaminated water treatment and bacterial inactivation. CHEMOSPHERE 2024; 363:142746. [PMID: 38969223 DOI: 10.1016/j.chemosphere.2024.142746] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/05/2024] [Revised: 06/23/2024] [Accepted: 06/29/2024] [Indexed: 07/07/2024]
Abstract
Vanadate-based photocatalysts have recently attracted substantial attention owing to their outstanding photocatalytic activity for degrading organic pollutants and generating energy via photocatalytic processes. However, the relatively high price of vanadium has hindered the development of vanadate-based photocatalysts for various applications. Spent catalysts obtained from oil refineries typically contain a significant quantity of vanadium, making them valuable for recovery and utilization as precursors for the production of high-value-added photocatalysts. In this study, we transformed the V present in spent catalysts produced by the petrochemical industry into ternary vanadate-based photocatalysts [BiVO4/InVO4/Ag3VO4 (BVO/IVO/AVO, respectively)] designed for water remediation. The ternary composites revealed an enhanced photocatalytic capability, which was 1.42 and 5.1 times higher than those of the binary BVO/IVO and pristine AVO due to the facilitated charge separation. The ternary photocatalysts not only effectively treated wastewater containing various organic dyes, such as methylene blue (MB), rhodamine 6G (R6G), and brilliant green (BG), but also exhibited remarkable photocatalytic performance in the degradation of antibiotics, reduction of Cr(VI), and bacterial inactivation. This paper proposes a feasible route for recycling industrial waste as a source of vanadium to produce highly efficient vanadate-based photocatalysts.
Collapse
Affiliation(s)
- Kuen-Chan Lee
- Department of Science Education, National Taipei University of Education, No. 134, Sec. 2, Heping E. Road, Da-an District, Taipei City, 106, Taiwan; PhD Program in Medical Neuroscience, College of Medical Science and Technology, Taipei Medical University, 250 Wuxing Street, Taipei City, 110, Taiwan
| | - Shih-Chieh Hsu
- Department of Chemical and Materials Engineering, Tamkang University, No. 151, Yingzhuan Road, Tamsui District, New Taipei City, 25137, Taiwan
| | - Jen-Hsien Huang
- Department of Green Material Technology, Green Technology Research Institute, CPC Corporation, No.2, Zuonan Rd., Nanzi District, Kaohsiung City, 81126, Taiwan
| | - Kuan-Syun Wang
- Department of Materials Engineering, Ming Chi University of Technology, New Taipei City, 243303, Taiwan
| | - Wei Kong Pang
- Faculty of Engineering, Institute for Superconducting & Electronic Materials, University of Wollongong, Wollongong, NSW, Australia
| | - Chih-Wei Hu
- National Synchrotron Radiation Research Center, 101 Hsin-Ann Road, Hsinchu Science Park, Hsinchu, 30076, Taiwan
| | - Yi-Jhen Jiang
- School of Pharmacy, College of Pharmacy, Taipei Medical University, 250 Wuxing Street, Taipei City, 110, Taiwan
| | - Er-Chieh Cho
- School of Pharmacy, College of Pharmacy, Taipei Medical University, 250 Wuxing Street, Taipei City, 110, Taiwan.
| | - Huei Chu Weng
- Department of Mechanical Engineering, Chung Yuan Christian University, No. 200, Chungpei Road, Chungli District, Taoyuan City, 32023, Taiwan.
| | - Ting-Yu Liu
- Department of Materials Engineering, Ming Chi University of Technology, New Taipei City, 243303, Taiwan; Department of Chemical Engineering and Materials Science, Yuan Ze University, Taoyuan City, 32003, Taiwan; College of Engineering & Center for Sustainability and Energy Technologies, Chang Gung University, Taoyuan, 33302, Taiwan.
| |
Collapse
|
2
|
Feng ZY, Jiang JC, Meng LY. Carbon-based photoelectrochemical sensors: recent developments and future prospects. Dalton Trans 2024; 53:11192-11215. [PMID: 38864748 DOI: 10.1039/d4dt00534a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/13/2024]
Abstract
Owing to the considerable potential of photoelectrochemical (PEC) sensors, they have gained significant attention in the analysis of biological, environmental, and food markers. However, the limited charge mass transfer efficiency and rapid recombination of electron hole pairs have become obstacles in the development of PEC sensors. In this case, considering the unique advantages of carbon-based materials, they can be used as photosensitizers, supporting materials and conductive substrates and coupled with semiconductors to prepare composite materials, solving the above problems. In addition, there are many types of carbon materials, which can have semiconductor properties and form heterojunctions after coupling with semiconductors, effectively promoting the separation of electron hole pairs. Herein, we aimed to provide a comprehensive analysis of reports on carbon-based PEC sensors by introducing their research and application status and discussing future development trends in this field. In particular, the types and performance improvement strategies of carbon-based electrodes and the working principles of carbon-based PEC sensors are explained. Furthermore, the applications of carbon-based photoelectric sensors in environmental monitoring, biomedicine, and food detection are highlighted. Finally, the current limitations in the research on carbon-based PEC sensors are emphasized and the need to enhance the sensitivity and selectivity through material modification, structural design, improved device performance, and other strategies are emphasized.
Collapse
Affiliation(s)
- Zhi-Yuan Feng
- Department of Chemistry, College of Science, Yanbian University, Park Road 977, Yanji, 133002, PR China
| | - Jin-Chi Jiang
- Department of Chemistry, College of Science, Yanbian University, Park Road 977, Yanji, 133002, PR China
| | - Long-Yue Meng
- Department of Chemistry, College of Science, Yanbian University, Park Road 977, Yanji, 133002, PR China
- Department of Environmental Science, College of Geography and Ocean Science, Yanbian University, Park Road 977, Yanji, 133002, PR China.
| |
Collapse
|
3
|
Parambil AM, Rajan S, Huang PC, Shashikumar U, Tsai PC, Rajamani P, Lin YC, Ponnusamy VK. Carbon and graphene quantum dots based architectonics for efficient aqueous decontamination by adsorption chromatography technique - Current state and prospects. ENVIRONMENTAL RESEARCH 2024; 251:118541. [PMID: 38417656 DOI: 10.1016/j.envres.2024.118541] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/02/2023] [Revised: 01/31/2024] [Accepted: 02/22/2024] [Indexed: 03/01/2024]
Abstract
Aquatic ecosystems and potable water are being exploited and depleted due to urbanization and the encouragement of extensive industrialization, which induces the scarcity of pure water. However, current decontamination methods are limited and inefficient. Various innovative remediation strategies with novel nanomaterials have recently been demonstrated for wastewater treatment. Carbon dots (C-dots) and graphene quantum dots (GQ-dots) are the most recent frontiers in carbon nanomaterial-based adsorption studies. C-dots are extremely small (1-10 nm) quasi-spherical carbon nanoparticles (mostly sp3 hybridized carbon), whereas GQ-dots are fragments of graphene (1-20 nm) composed of primarily sp2 hybridized carbon. This article highlights the function of C-dots and GQ-dots with their specifications and characteristics for the efficient removal of organic and inorganic contaminants in water via adsorption chromatography. The alteration of adsorption attributes with the hybrid blending of these dots has been critically analyzed. Moreover, various top-down and bottom-up approaches for synthesizing C-dots and GQ-dots, which ultimately affect their morphology and structure, are described in detail. Finally, we review the research deficit in the adsorption of diverse pollutants, fabrication challenges, low molecular weight, self-agglomeration, and the future of the dots by providing research prospects and selectivity and sensitivity perspectives, the importance of post-adsorption optimization strategies and the path toward scalability at the tail of the article.
Collapse
Affiliation(s)
- Ajith Manayil Parambil
- School of Environmental Sciences, Jawaharlal Nehru University, New Delhi, India, 110067; Research Center for Precision Environmental Medicine, Kaohsiung Medical University (KMU), Kaohsiung City, 807, Taiwan
| | - Shijin Rajan
- School of Environmental Sciences, Jawaharlal Nehru University, New Delhi, India, 110067
| | - Po-Chin Huang
- National Institute of Environmental Health Sciences, National Health Research Institutes, Miaoli, 350, Taiwan
| | - Uday Shashikumar
- Department of Medicinal and Applied Chemistry, Kaohsiung Medical University (KMU), Kaohsiung City, 807, Taiwan
| | - Pei-Chien Tsai
- Department of Medicinal and Applied Chemistry, Kaohsiung Medical University (KMU), Kaohsiung City, 807, Taiwan; Department of Computational Biology, Institute of Bioinformatics, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai, Tamil Nadu 602105, India
| | - Paulraj Rajamani
- School of Environmental Sciences, Jawaharlal Nehru University, New Delhi, India, 110067.
| | - Yuan-Chung Lin
- Institute of Environmental Engineering, National Sun Yat-Sen University, Kaohsiung City, Taiwan; Center for Emerging Contaminants Research, National Sun Yat-Sen University, Kaohsiung City, Taiwan.
| | - Vinoth Kumar Ponnusamy
- Research Center for Precision Environmental Medicine, Kaohsiung Medical University (KMU), Kaohsiung City, 807, Taiwan; Department of Medicinal and Applied Chemistry, Kaohsiung Medical University (KMU), Kaohsiung City, 807, Taiwan; Center for Emerging Contaminants Research, National Sun Yat-Sen University, Kaohsiung City, Taiwan; Department of Medical Research, Kaohsiung Medical University Hospital (KMUH), Kaohsiung City, 807, Taiwan; Department of Chemistry, National Sun Yat-sen University (NSYSU), Kaohsiung City, 804, Taiwan.
| |
Collapse
|
4
|
Fu Z, Wang F, Liu J, Sun W, Zhang H, Song X, Yao J. High responsivity photodetector based on MEH-PPV/CsPbBr 3heterojunction. NANOTECHNOLOGY 2024; 35:325201. [PMID: 38697049 DOI: 10.1088/1361-6528/ad4654] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/14/2023] [Accepted: 05/02/2024] [Indexed: 05/04/2024]
Abstract
Perovskite quantum dots (QDs) and organic materials have great research potential in the field of optoelectronic devices. In this paper, MEH-PPV/CsPbBr3heterojunction photodetectors (PDs) are prepared by spin coating method based on the good photoelectric properties of CsPbBr3perovskite QDs and MEH-PPV. The MEH-PPV/CsPbBr3heterojunction improves the energy level arrangement, and CsPbBr3QDs can passivate the surface defects of MEH-PPV films to achieve effective charge separation and transfer, thus inhibiting the dark current and improving the photoelectric performance of the device. Under 532 nm laser irradiation, the responsivity (R) of MEH-PPV/CsPbBr3heterojunction PD is 11.98 A W-1, the specific detectivity (D*) is 6.98 × 1011Jones, and the response time is 15/16 ms. This work provides experience for the study of perovskite QDs and organic materials heterojunction optoelectronic devices.
Collapse
Affiliation(s)
- Zhendong Fu
- Center of Intelligent Opto-electric Sensors, Tianjin Jinhang Technical Physics Institute, Tianjin, 300308, People's Republic of China
| | - Fuguo Wang
- School of Mechanical Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, People's Republic of China
- Institute of Micro-nano Optoelectronics and Terahertz Technology, Jiangsu University, Zhenjiang, Jiangsu 212013, People's Republic of China
| | - Jiangnan Liu
- Center of Intelligent Opto-electric Sensors, Tianjin Jinhang Technical Physics Institute, Tianjin, 300308, People's Republic of China
| | - Wenbao Sun
- Center of Intelligent Opto-electric Sensors, Tianjin Jinhang Technical Physics Institute, Tianjin, 300308, People's Republic of China
| | - Haiting Zhang
- School of Mechanical Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, People's Republic of China
- Institute of Micro-nano Optoelectronics and Terahertz Technology, Jiangsu University, Zhenjiang, Jiangsu 212013, People's Republic of China
| | - Xiaoxian Song
- School of Mechanical Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, People's Republic of China
- Institute of Micro-nano Optoelectronics and Terahertz Technology, Jiangsu University, Zhenjiang, Jiangsu 212013, People's Republic of China
- School of Precision Instruments and Opto-electronics Engineering, Tianjin University, Tianjin 300072, People's Republic of China
| | - Jianquan Yao
- School of Mechanical Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, People's Republic of China
- Institute of Micro-nano Optoelectronics and Terahertz Technology, Jiangsu University, Zhenjiang, Jiangsu 212013, People's Republic of China
- School of Precision Instruments and Opto-electronics Engineering, Tianjin University, Tianjin 300072, People's Republic of China
| |
Collapse
|
5
|
Kim CM, Jaffari ZH, Abbas A, Chowdhury MF, Cho KH. Machine learning analysis to interpret the effect of the photocatalytic reaction rate constant (k) of semiconductor-based photocatalysts on dye removal. JOURNAL OF HAZARDOUS MATERIALS 2024; 465:132995. [PMID: 38039815 DOI: 10.1016/j.jhazmat.2023.132995] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/02/2023] [Revised: 11/02/2023] [Accepted: 11/10/2023] [Indexed: 12/03/2023]
Abstract
Photocatalytic reactions with semiconductor-based photocatalysts have been investigated extensively for application to wastewater treatment, especially dye degradation, yet the interactions between different process parameters have rarely been reported due to their complicated reaction mechanisms. Hence, this study aims to discern the impact of each factor, and each interaction between multiple factors on reaction rate constant (k) using a decision tree model. The dyes selected as target pollutants were indigo and malachite green, and 5 different semiconductor-based photocatalysts with 17 different compositions were tested, which generated 34 input features and 1527 data points. The Boruta Shapley Additive exPlanations (SHAP) feature selection for the 34 inputs found that 11 inputs were significantly important. The decision tree model exhibited for 11 input features with an R2 value of 0.94. The SHAP feature importance analysis suggested that photocatalytic experimental conditions, with an importance of 59%, was the most important input category, followed by atomic composition (39%) and physicochemical properties (2%). Additionally, the effects on k of the synergy between the metal cocatalysts and important experimental conditions were confirmed by two feature SHAP dependence plots, regardless of importance order. This work provides insight into the single and multiple factors that affect reaction rate and mechanism.
Collapse
Affiliation(s)
- Chang-Min Kim
- Future and Fusion Lab of Architectural, Civil and Environmental Engineering, Korea University, Seoul 02841, Republic of Korea
| | - Zeeshan Haider Jaffari
- Department of Civil and Environmental Engineering, Konkuk University, 120 Neungdong-ro, Gwangjin-gu, Seoul 05029, Republic of Korea
| | - Ather Abbas
- Physical Science and Engineering Division, 4700 King Abdullah University of Science and Technology, Thuwal, Mecca Province, Saudi Arabia
| | - Mir Ferdous Chowdhury
- Department of Global Smart City, Sungkyunkwan University (SKKU), 2066, Seobu-ro, Jangan-gu, Suwon, Gyeonggi-do 16419, Republic of Korea
| | - Kyung Hwa Cho
- School of Civil, Environmental, and Architectural Engineering, Korea University, Seoul 02841, Republic of Korea.
| |
Collapse
|
6
|
Ye JQ, Dai YZ, Xu SY, Wang PX, Sun ZH, Qian JF, Liang Q, He MY, Chen Q. Synergistic Enhancement of Photocatalytic H 2 Evolution over NH 2-MIL-125 Modified with Dual Cocatalyst. Inorg Chem 2023; 62:21396-21408. [PMID: 38060836 DOI: 10.1021/acs.inorgchem.3c03502] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2023]
Abstract
The construction of efficient photocatalysts for water splitting to enable H2 evolution is pivotal to alleviate energy issues and environmental concerns. In this work, carbon dots (CDs) were prepared by employing "green solvent" ionic liquids as carbon sources and then combined with Pt/NH2-MIL-125, resulting in the emergence of a high-efficiency photocatalyst termed CDs-Pt/NH2-MIL-125 for the first time. This composite photocatalyst exhibited outstanding photocatalytic activity in H2 production under visible light irradiation. Notably, the H2 production rate of CDs100-Pt/NH2-MIL-125 reaches up to 951.4 μmol/g/h, which was 3.1 times that of Pt/NH2-MIL-125. The characterization results indicate that CDs and Pt uniformly dispersed on the surface of NH2-MIL-125 and fabricated a synergistic compact structure, providing a high BET surface area (985 m2 g-1) and a suitable band gap. Furthermore, the distinctive embeddable-dispersed CDs and Pt, as dual cocatalyst, can harvest light and facilitate the transfer of photogenerated electrons, thereby significantly augmenting the exploitation of visible light. The plausible mechanism of photocatalytic H2 evolution over the CDs-Pt/NH2-MIL-125 catalyst was also discussed. This work introduces a promising strategy for designing high-performance CDs-MOFs-based photocatalysts, an innovative step toward achieving efficient photocatalytic water splitting for H2 production.
Collapse
Affiliation(s)
- Jun-Qing Ye
- Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, School of Petrochemical Engineering, Changzhou University, Changzhou 213164, P.R. China
| | - Yan-Zi Dai
- Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, School of Petrochemical Engineering, Changzhou University, Changzhou 213164, P.R. China
| | - Shu-Ying Xu
- Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, School of Petrochemical Engineering, Changzhou University, Changzhou 213164, P.R. China
| | - Pin-Xi Wang
- Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, School of Petrochemical Engineering, Changzhou University, Changzhou 213164, P.R. China
| | - Zhong-Hua Sun
- Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, School of Petrochemical Engineering, Changzhou University, Changzhou 213164, P.R. China
| | - Jun-Feng Qian
- Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, School of Petrochemical Engineering, Changzhou University, Changzhou 213164, P.R. China
| | - Qian Liang
- Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, School of Petrochemical Engineering, Changzhou University, Changzhou 213164, P.R. China
| | - Ming-Yang He
- Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, School of Petrochemical Engineering, Changzhou University, Changzhou 213164, P.R. China
| | - Qun Chen
- Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, School of Petrochemical Engineering, Changzhou University, Changzhou 213164, P.R. China
| |
Collapse
|
7
|
Balakrishnan T, Sagadevan S, Le MV, Soga T, Oh WC. Recent Progress on Functionalized Graphene Quantum Dots and Their Nanocomposites for Enhanced Gas Sensing Applications. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 14:11. [PMID: 38202466 PMCID: PMC10780593 DOI: 10.3390/nano14010011] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/11/2023] [Revised: 12/15/2023] [Accepted: 12/16/2023] [Indexed: 01/12/2024]
Abstract
Gas-sensing technology has witnessed significant advancements that have been driven by the emergence of graphene quantum dots (GQDs) and their tailored nanocomposites. This comprehensive review surveys the recent progress made in the construction methods and applications of functionalized GQDs and GQD-based nanocomposites for gas sensing. The gas-sensing mechanisms, based on the Fermi-level control and charge carrier depletion layer theory, are briefly explained through the formation of heterojunctions and the adsorption/desorption principle. Furthermore, this review explores the enhancements achieved through the incorporation of GQDs into nanocomposites with diverse matrices, including polymers, metal oxides, and 2D materials. We also provide an overview of the key progress in various hazardous gas sensing applications using functionalized GQDs and GQD-based nanocomposites, focusing on key detection parameters such as sensitivity, selectivity, stability, response and recovery time, repeatability, and limit of detection (LOD). According to the most recent data, the normally reported values for the LOD of various toxic gases using GQD-based sensors are in the range of 1-10 ppm. Remarkably, some GQD-based sensors exhibit extremely low detection limits, such as N-GQDs/SnO2 (0.01 ppb for formaldehyde) and GQD@SnO2 (0.10 ppb for NO2). This review provides an up-to-date perspective on the evolving landscape of functionalized GQDs and their nanocomposites as pivotal components in the development of advanced gas sensors.
Collapse
Affiliation(s)
- Thivyah Balakrishnan
- Department of Chemical and Process Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, Bangi 43600, Malaysia
| | - Suresh Sagadevan
- Nanotechnology & Catalysis Research Centre, University of Malaya, Kuala Lumpur 50603, Malaysia
| | - Minh-Vien Le
- Faculty of Chemical Engineering, Ho Chi Minh City University of Technology (HCMUT), Ho Chi Minh City 700000, Vietnam
- Faculty of Chemical Engineering, Vietnam National University Ho Chi Minh City, Ho Chi Minh City 700000, Vietnam
| | - Tetsuo Soga
- Department of Electrical and Mechanical Engineering, Nagoya Institute of Technology, Nagoya 466-8555, Japan
| | - Won-Chun Oh
- Department of Advanced Materials Science and Engineering, Hanseo University, Seosan 356-706, Republic of Korea
| |
Collapse
|
8
|
Li T, Guo G, Xing H, Tang S, Hu H, Wang L, Qian X, Chen D. Construction of fluorescent sensor array and three-dimensional microfluidic paper based analytical device for specific identification and visual determination of antibiotics in food. Food Chem 2023; 429:136947. [PMID: 37499515 DOI: 10.1016/j.foodchem.2023.136947] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/15/2023] [Revised: 06/30/2023] [Accepted: 07/17/2023] [Indexed: 07/29/2023]
Abstract
For antibiotics misuse since the global outbreak of COVID 19, a novel strategy for discriminating and detecting antibiotics is proposed based on the graphene quantum dots with multi-doped heteroatoms including F, N and P (M-GQDs), which exhibit blue emission (419.0 nm) under the excitation of 336.0 nm. Specifically, the fluorescence of M-GQDs is quenched by tetracyclines (TCs) owing to inner filter effect (IFE) and enhanced by alkane-modified fluoroquinolones (AFQs), which is attributed to restricted conformational rotation based on π-π stacking, hydrogen-bonding and electrostatic interactions. Meanwhile, the electron-accepting property of oxazine ring in oxazine-modified fluoroquinolones (OFQs) increases emission peak at 498.0 nm and decreases emission peak at 419.0 nm as the color changes from blue to cyan. Moreover, a cascade system integrated with 3D microfluidic paper-based analytical device (3D-μPAD) is applied successfully for visually distinguishing three antibiotics, which shows great potential and versatility of M-GQDs for food safety monitoring.
Collapse
Affiliation(s)
- Tingting Li
- Department of Microelectronic Science and Engineering, School of Physical Science and Technology, Ningbo University, Ningbo 315211, PR China
| | - Guoqiang Guo
- Department of Microelectronic Science and Engineering, School of Physical Science and Technology, Ningbo University, Ningbo 315211, PR China
| | - Haoming Xing
- Department of Microelectronic Science and Engineering, School of Physical Science and Technology, Ningbo University, Ningbo 315211, PR China
| | - Siyuan Tang
- Department of Microelectronic Science and Engineering, School of Physical Science and Technology, Ningbo University, Ningbo 315211, PR China; Department of Materials Science and Engineering, Shenzhen Key Laboratory of Full Spectral Solar Electricity Generation (FSSEG), Southern University of Science and Technology, Shenzhen 518055, PR China
| | - Houwen Hu
- Department of Microelectronic Science and Engineering, School of Physical Science and Technology, Ningbo University, Ningbo 315211, PR China
| | - Linfan Wang
- Department of Microelectronic Science and Engineering, School of Physical Science and Technology, Ningbo University, Ningbo 315211, PR China
| | - Xiaoqing Qian
- Department of Microelectronic Science and Engineering, School of Physical Science and Technology, Ningbo University, Ningbo 315211, PR China.
| | - Da Chen
- Department of Microelectronic Science and Engineering, School of Physical Science and Technology, Ningbo University, Ningbo 315211, PR China.
| |
Collapse
|
9
|
Rezeq M, Abbas Y, Wen B, Wasilewski Z, Ban D. Physical probing of quantum energy levels in a single indium arsenide (InAs) quantum dot. NANOSCALE ADVANCES 2023; 5:5562-5569. [PMID: 37822897 PMCID: PMC10563844 DOI: 10.1039/d3na00638g] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/12/2023] [Accepted: 09/15/2023] [Indexed: 10/13/2023]
Abstract
Indium arsenide (InAs) quantum dots (QDs) grown by molecular beam epitaxy (EBM) on gallium arsenide (GaAs) substrates have exhibited quantized charge-trapping characteristics. An electric charge can be injected in a single QD by a gold-coated AFM nano-probe placed directly on it using a conductive-mode atomic force microscope (C-AFM). The results revealed separate current-voltage (I-V) curves during consecutive measurements, where the turn-on voltages measured at the subsequent voltage sweeps are incrementally lower than that at the initial sweep. We demonstrate that the charge state of the QD can change over a long enough time by measuring the I-V data on the same QD at different time intervals. Discrete energy states (here, five states) have been observed due to the quantized charge leakage from the QD into the surrounding materials. These quantum states with five energy levels have been verified using quantum theory analysis of the quantum-well with the help of a numerical simulation model, which depends on the QD dimensions. The size of the quantum-well in the model is in good agreement with the actual QD size, whose lateral dimension is confirmed using a scanning electron microscope. At the same time, the height is estimated from the atomic force microscope topography.
Collapse
Affiliation(s)
- Moh'd Rezeq
- Department of Physics, Khalifa University of Science and Technology POB 127788 Abu Dhabi United Arab Emirates
- System on Chip Centre, Khalifa University of Science and Technology POB 127788 Abu Dhabi United Arab Emirates
| | - Yawar Abbas
- Department of Physics, Khalifa University of Science and Technology POB 127788 Abu Dhabi United Arab Emirates
- System on Chip Centre, Khalifa University of Science and Technology POB 127788 Abu Dhabi United Arab Emirates
| | - Boyu Wen
- Department of Electrical and Computer Engineering, Waterloo Institute for Nanotechnology, University of Waterloo ON Canada
| | - Zbig Wasilewski
- Department of Electrical and Computer Engineering, Waterloo Institute for Nanotechnology, University of Waterloo ON Canada
| | - Dayan Ban
- Department of Electrical and Computer Engineering, Waterloo Institute for Nanotechnology, University of Waterloo ON Canada
| |
Collapse
|
10
|
Jena M, Mallick S, Rath A, Dalai MK, Das DP. GQD@NiFe-LDH Nanosheets for Photocatalytic Activity towards Textile Dye Degradation via Lattice Contraction. Chempluschem 2023; 88:e202300276. [PMID: 37592812 DOI: 10.1002/cplu.202300276] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/07/2023] [Revised: 08/14/2023] [Accepted: 08/17/2023] [Indexed: 08/19/2023]
Abstract
The functionalized NiFe-LDH with photosensitized GQDs were synthesized through the hydrothermal route by differing the amount of GQDs solution and studied its efficacy towards the mineralization of textile dyes under visible light. The synthesized samples were characterized by XRD, FESEM, HRTEM, DRUV-Vis, RAMAN, XPS, and BET. The combined effect of the hexagonal carbon lattice in GQD and open layered porous structure of NiFe-LDH nanosheets results in the contraction of the lattice. Different reactive and conventional dyes were taken as representative dyes to evaluate the activity of the as-synthesized photocatalysts. The enhanced electron absorption/donor effect between GQDs and NiFe-LDH, and the growth of oxygen-bridged Ni/Fe-C moieties enable the composite to exhibit better photocatalytic activity. Both photocatalytic activity and characterization results confirmed that the GQD@NiFe-LDH nanocomposite heterostructure synthesized at 160 °C by taking 10 mL of GQDs aqueous solution named GNFLDH10 has a higher degree of crystallinity and has the best photocatalytic efficiency compared to other reported visible light catalysts. Specifically, the above optimized GQD@NiFe-LDH photocatalyst is capable of photo-mineralizing 50 ppm of Reactive Green in 20 min, Reactive Red in 20 min, and Congo Red in 25 min respectively following a direct Z-scheme mechanism with substantial reusability.
Collapse
Affiliation(s)
- Manasi Jena
- Central Characterisation Department, CSIR-Institute of Minerals and Materials Technology (CSIR-IMMT), Bhubaneswar, 751013, Odisha, India
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, -201002, India
| | - Sagar Mallick
- Central Characterisation Department, CSIR-Institute of Minerals and Materials Technology (CSIR-IMMT), Bhubaneswar, 751013, Odisha, India
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, -201002, India
| | - Ashutosh Rath
- Central Characterisation Department, CSIR-Institute of Minerals and Materials Technology (CSIR-IMMT), Bhubaneswar, 751013, Odisha, India
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, -201002, India
| | - Manas Kumar Dalai
- Central Characterisation Department, CSIR-Institute of Minerals and Materials Technology (CSIR-IMMT), Bhubaneswar, 751013, Odisha, India
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, -201002, India
| | - Dipti P Das
- Central Characterisation Department, CSIR-Institute of Minerals and Materials Technology (CSIR-IMMT), Bhubaneswar, 751013, Odisha, India
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, -201002, India
| |
Collapse
|
11
|
Hu X, Xu Y, Liu S, Gudda FO, Ling W, Qin C, Gao Y. Graphene Quantum Dots Nonmonotonically Influence the Horizontal Transfer of Extracellular Antibiotic Resistance Genes via Bacterial Transformation. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2301177. [PMID: 37144438 DOI: 10.1002/smll.202301177] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/09/2023] [Revised: 04/10/2023] [Indexed: 05/06/2023]
Abstract
Graphene quantum dots (GQDs) coexist with antibiotic resistance genes (ARGs) in the environment. Whether GQDs influence ARG spread needs investigation, since the resulting development of multidrug-resistant pathogens would threaten human health. This study investigates the effect of GQDs on the horizontal transfer of extracellular ARGs (i.e., transformation, a pivotal way that ARGs spread) mediated by plasmids into competent Escherichia coli cells. GQDs enhance ARG transfer at lower concentrations, which are close to their environmental residual concentrations. However, with further increases in concentration (closer to working concentrations needed for wastewater remediation), the effects of enhancement weaken or even become inhibitory. At lower concentrations, GQDs promote the gene expression related to pore-forming outer membrane proteins and the generation of intracellular reactive oxygen species, thus inducing pore formation and enhancing membrane permeability. GQDs may also act as carriers to transport ARGs into cells. These factors result in enhanced ARG transfer. At higher concentrations, GQD aggregation occurs, and aggregates attach to the cell surface, reducing the effective contact area of recipients for external plasmids. GQDs also form large agglomerates with plasmids and thus hindering ARG entrance. This study could promote the understanding of the GQD-caused ecological risks and benefit their safe application.
Collapse
Affiliation(s)
- Xiaojie Hu
- Institute of Organic Contaminant Control and Soil Remediation, College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing, 210095, P. R. China
| | - Yanxing Xu
- Institute of Organic Contaminant Control and Soil Remediation, College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing, 210095, P. R. China
| | - Si Liu
- Institute of Organic Contaminant Control and Soil Remediation, College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing, 210095, P. R. China
| | - Fredrick Owino Gudda
- Institute of Organic Contaminant Control and Soil Remediation, College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing, 210095, P. R. China
| | - Wanting Ling
- Institute of Organic Contaminant Control and Soil Remediation, College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing, 210095, P. R. China
| | - Chao Qin
- Institute of Organic Contaminant Control and Soil Remediation, College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing, 210095, P. R. China
| | - Yanzheng Gao
- Institute of Organic Contaminant Control and Soil Remediation, College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing, 210095, P. R. China
| |
Collapse
|
12
|
Saleem H, Saud A, Zaidi SJ. Sustainable Preparation of Graphene Quantum Dots from Leaves of Date Palm Tree. ACS OMEGA 2023; 8:28098-28108. [PMID: 37576687 PMCID: PMC10413365 DOI: 10.1021/acsomega.3c00694] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/02/2023] [Accepted: 07/03/2023] [Indexed: 08/15/2023]
Abstract
The date palm (Phoenix dactylifera), a subtropical and tropical tree, included in the family Palmae (Arecaceae) is one of the oldest cultivated plants of mankind. Date palm is a major agricultural product in the semi-arid and arid areas of the world, particularly in Arab countries. These trees generate high quantities of agricultural waste in the form of dry leaves, seeds, etc. In this study, dried date palm leaves were used as green precursors for synthesizing graphene quantum dots (GQDs). This work reported the preparation of GQDs using two different sustainable methods. GQD-1 was developed using a simple, hydrothermal technique at 200 °C for 12 h in water, with no requirement of reducing or passivizing agents or organic solvents. GQD-2 was prepared using a hydrothermal technique at 200 °C for 12 h in water, with the usage of just distilled water and absolute ethanol. The compositional analysis of the leaf extract was performed, along with the morphological, compositional, and optical examination of the sustainably developed GQDs. The characterization results confirmed the successful formation of GQDs, with average sizes ranging from 3.5 to 8 nm. This study helps to obtain GQDs in an economical, eco-friendly, and biocompatible manner and can assist in large-scale production and in recycling date palm tree waste products from Middle East countries into value-added products.
Collapse
Affiliation(s)
- Haleema Saleem
- UNESCO Chair on Desalination
and Water Treatment, Center for Advanced Materials, Qatar University, Doha 2713, Qatar
| | - Asif Saud
- UNESCO Chair on Desalination
and Water Treatment, Center for Advanced Materials, Qatar University, Doha 2713, Qatar
| | - Syed Javaid Zaidi
- UNESCO Chair on Desalination
and Water Treatment, Center for Advanced Materials, Qatar University, Doha 2713, Qatar
| |
Collapse
|
13
|
Yang Z, Zhou S, Feng X, Wang N, Ola O, Zhu Y. Recent Progress in Multifunctional Graphene-Based Nanocomposites for Photocatalysis and Electrocatalysis Application. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:2028. [PMID: 37446544 DOI: 10.3390/nano13132028] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/09/2023] [Revised: 07/02/2023] [Accepted: 07/04/2023] [Indexed: 07/15/2023]
Abstract
The global energy shortage and environmental degradation are two major issues of concern in today's society. The production of renewable energy and the treatment of pollutants are currently the mainstream research directions in the field of photocatalysis. In addition, over the last decade or so, graphene (GR) has been widely used in photocatalysis due to its unique physical and chemical properties, such as its large light-absorption range, high adsorption capacity, large specific surface area, and excellent electronic conductivity. Here, we first introduce the unique properties of graphene, such as its high specific surface area, chemical stability, etc. Then, the basic principles of photocatalytic hydrolysis, pollutant degradation, and the photocatalytic reduction of CO2 are summarized. We then give an overview of the optimization strategies for graphene-based photocatalysis and the latest advances in its application. Finally, we present challenges and perspectives for graphene-based applications in this field in light of recent developments.
Collapse
Affiliation(s)
- Zanhe Yang
- State Key Laboratory of Featured Metal Materials and Life-Cycle Safety for Composite Structures, School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China
| | - Siqi Zhou
- State Key Laboratory of Featured Metal Materials and Life-Cycle Safety for Composite Structures, School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China
| | - Xiangyu Feng
- State Key Laboratory of Featured Metal Materials and Life-Cycle Safety for Composite Structures, School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China
| | - Nannan Wang
- State Key Laboratory of Featured Metal Materials and Life-Cycle Safety for Composite Structures, School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China
| | - Oluwafunmilola Ola
- Advanced Materials Group, Faculty of Engineering, The University of Nottingham, Nottingham NG7 2RD, UK
| | - Yanqiu Zhu
- State Key Laboratory of Featured Metal Materials and Life-Cycle Safety for Composite Structures, School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China
| |
Collapse
|
14
|
Song S, Kim H, Kang C, Bae J. Terahertz Optical Properties and Carrier Behaviors of Graphene Oxide Quantum Dot and Reduced Graphene Oxide Quantum Dot via Terahertz Time-Domain Spectroscopy. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:1948. [PMID: 37446464 DOI: 10.3390/nano13131948] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/22/2023] [Revised: 06/16/2023] [Accepted: 06/22/2023] [Indexed: 07/15/2023]
Abstract
Graphene quantum dots (GQDs) with a band gap have been widely applied in many fields owing to their unique optical properties. To better utilize the optical advantages of GQDs, it is important to understand their optical characteristics. Our study demonstrates the optical properties and carrier behaviors of synthesized graphene oxide quantum dot (GOQD) and reduced graphene oxide quantum dot (rGOQD) pellets via Terahertz time-domain spectroscopy (THz-TDS). The complex permittivity and optical conductivity are obtained in the terahertz region, indicating that the optical conductivity of the GOQD is higher than that of the rGOQD. Although rGOQD has a higher carrier density, approximately 1.5-times than that of GOQD, the lower charge carrier mobility of the rGOQD, which is obtained using Drude-Lorentz oscillator model fitting contributes to a decrease in optical conductivity. This lower mobility can be attributed to the more significant number of defect states within the rGOQD compared to GOQD. To the best of our knowledge, our study initially demonstrates the optical property and carrier behaviors of GOQD and rGOQD in the THz region. Moreover, this study provides important information on factors influencing carrier behavior to various fields in which carrier behavior plays an important role.
Collapse
Affiliation(s)
- Seunghyun Song
- Department of Physics, Gachon University, 1342 Seongnamdaero, Sujeong-gu, Seongnam 13120, Republic of Korea
| | - Hyeongmun Kim
- Department of Physics, Chonnam National University, 77 Yongbong-ro, Buk-gu, Gwangju 61186, Republic of Korea
- Advanced Photonics Research Institute, Gwangju Institue of Science and Technology, 123 Cheomdangwagi-ro, Buk-gu, Gwangju 61005, Republic of Korea
| | - Chul Kang
- Advanced Photonics Research Institute, Gwangju Institue of Science and Technology, 123 Cheomdangwagi-ro, Buk-gu, Gwangju 61005, Republic of Korea
| | - Joonho Bae
- Department of Physics, Gachon University, 1342 Seongnamdaero, Sujeong-gu, Seongnam 13120, Republic of Korea
| |
Collapse
|
15
|
Zhong X, Jordan R, Chen JR, Raymond J, Lahann J. Systematic Studies into the Area Selectivity of Chemical Vapor Deposition Polymerization. ACS APPLIED MATERIALS & INTERFACES 2023; 15:21618-21628. [PMID: 37079371 PMCID: PMC10165597 DOI: 10.1021/acsami.3c01268] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/03/2023]
Abstract
As the current top-down microchip manufacturing processes approach their resolution limits, there is a need for alternative patterning technologies that offer high feature densities and edge fidelity with single-digit nanometer resolution. To address this challenge, bottom-up processes have been considered, but they typically require sophisticated masking and alignment schemes and/or face materials' compatibility issues. In this work, we report a systematic study into the impact of thermodynamic processes on the area selectivity of chemical vapor deposition (CVD) polymerization of functional [2.2]paracyclophanes (PCP). Adhesion mapping of preclosure CVD films by atomic force microscopy (AFM) provided a detailed understanding of the geometric features of the polymer islands that form under different deposition conditions. Our results suggest a correlation between interfacial transport processes, including adsorption, diffusion, and desorption, and thermodynamic control parameters, such as substrate temperature and working pressure. This work culminates in a kinetic model that predictes both area-selective and nonselective CVD parameters for the same polymer/substrate ensemble (PPX-C + Cu). While limited to a focused subset of CVD polymers and substrates, this work provides an improved mechanistic understanding of area-selective CVD polymerization and highlights the potential for thermodynamic control in tuning area selectivity.
Collapse
Affiliation(s)
- Xiaoyang Zhong
- Department of Materials Science and Engineering, University of Michigan, 2300 Hayward St., Ann Arbor, Michigan 48109, United States
- Biointerfaces Institute, University of Michigan, 2800 Plymouth Road, Ann Arbor, Michigan 48109, United States
| | - Rob Jordan
- Intel Corporation, 2501 NE Century Blvd., Hillsboro, Oregon 97124, United States
| | - Jiun-Ruey Chen
- Intel Corporation, 2501 NE Century Blvd., Hillsboro, Oregon 97124, United States
| | - Jeffery Raymond
- Biointerfaces Institute, University of Michigan, 2800 Plymouth Road, Ann Arbor, Michigan 48109, United States
- Department of Chemical Engineering, University of Michigan, 2800 Plymouth Rd., Ann Arbor, Michigan 48109, United States
| | - Joerg Lahann
- Department of Materials Science and Engineering, University of Michigan, 2300 Hayward St., Ann Arbor, Michigan 48109, United States
- Biointerfaces Institute, University of Michigan, 2800 Plymouth Road, Ann Arbor, Michigan 48109, United States
- Department of Chemical Engineering, University of Michigan, 2800 Plymouth Rd., Ann Arbor, Michigan 48109, United States
| |
Collapse
|
16
|
Pang J, Peng S, Hou C, Zhao H, Fan Y, Ye C, Zhang N, Wang T, Cao Y, Zhou W, Sun D, Wang K, Rümmeli MH, Liu H, Cuniberti G. Applications of Graphene in Five Senses, Nervous System, and Artificial Muscles. ACS Sens 2023; 8:482-514. [PMID: 36656873 DOI: 10.1021/acssensors.2c02790] [Citation(s) in RCA: 7] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/20/2023]
Abstract
Graphene remains of great interest in biomedical applications because of biocompatibility. Diseases relating to human senses interfere with life satisfaction and happiness. Therefore, the restoration by artificial organs or sensory devices may bring a bright future by the recovery of senses in patients. In this review, we update the most recent progress in graphene based sensors for mimicking human senses such as artificial retina for image sensors, artificial eardrums, gas sensors, chemical sensors, and tactile sensors. The brain-like processors are discussed based on conventional transistors as well as memristor related neuromorphic computing. The brain-machine interface is introduced for providing a single pathway. Besides, the artificial muscles based on graphene are summarized in the means of actuators in order to react to the physical world. Future opportunities remain for elevating the performances of human-like sensors and their clinical applications.
Collapse
Affiliation(s)
- Jinbo Pang
- Collaborative Innovation Center of Technology and Equipment for Biological Diagnosis and Therapy in Universities of Shandong, Institute for Advanced Interdisciplinary Research (iAIR), University of Jinan, Jinan 250022, China
| | - Songang Peng
- High-Frequency High-Voltage Device and Integrated Circuits R&D Center and Key Laboratory of Microelectronic Devices & Integrated Technology, Institute of Microelectronics, Chinese Academy of Sciences, Beijing, 100029, China
| | - Chongyang Hou
- Collaborative Innovation Center of Technology and Equipment for Biological Diagnosis and Therapy in Universities of Shandong, Institute for Advanced Interdisciplinary Research (iAIR), University of Jinan, Jinan 250022, China
| | - Hongbin Zhao
- State Key Laboratory of Advanced Materials for Smart Sensing, GRINM Group Co. Ltd., Xinwai Street 2, Beijing 100088, People's Republic of China
| | - Yingju Fan
- School of Chemistry and Chemical Engineering, University of Jinan, Shandong, Jinan 250022, China
| | - Chen Ye
- School of Chemistry and Chemical Engineering, University of Jinan, Shandong, Jinan 250022, China
| | - Nuo Zhang
- School of Chemistry and Chemical Engineering, University of Jinan, Shandong, Jinan 250022, China
| | - Ting Wang
- State Key Laboratory of Biobased Material and Green Papermaking and People's Republic of China School of Bioengineering, Qilu University of Technology, Shandong Academy of Sciences, No. 3501 Daxue Road, Jinan 250353, People's Republic of China
| | - Yu Cao
- Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology (Ministry of Education) and School of Electrical Engineering, Northeast Electric Power University, Jilin 132012, China
| | - Weijia Zhou
- Collaborative Innovation Center of Technology and Equipment for Biological Diagnosis and Therapy in Universities of Shandong, Institute for Advanced Interdisciplinary Research (iAIR), University of Jinan, Jinan 250022, China
| | - Ding Sun
- School of Electrical and Computer Engineering, Jilin Jianzhu University, Changchun 130118, P. R. China
| | - Kai Wang
- School of Electrical Engineering, Weihai Innovation Research Institute, Qingdao University, Qingdao 266000, China
| | - Mark H Rümmeli
- Leibniz Institute for Solid State and Materials Research Dresden, Dresden, D-01171, Germany.,College of Energy, Soochow Institute for Energy and Materials Innovations, and Key Laboratory of Advanced Carbon Materials and Wearable Energy Technologies of Jiangsu Province, Soochow University, Suzhou 215006, China.,Centre of Polymer and Carbon Materials, Polish Academy of Sciences, M. Curie Sklodowskiej 34, Zabrze 41-819, Poland.,Institute for Complex Materials, IFW Dresden, 20 Helmholtz Strasse, Dresden 01069, Germany.,Center for Energy and Environmental Technologies, VŠB-Technical University of Ostrava, 17. Listopadu 15, Ostrava 708 33, Czech Republic
| | - Hong Liu
- Collaborative Innovation Center of Technology and Equipment for Biological Diagnosis and Therapy in Universities of Shandong, Institute for Advanced Interdisciplinary Research (iAIR), University of Jinan, Jinan 250022, China.,State Key Laboratory of Crystal Materials, Center of Bio & Micro/Nano Functional Materials, Shandong University, 27 Shandanan Road, Jinan 250100, China
| | - Gianaurelio Cuniberti
- Institute for Materials Science and Max Bergmann Center of Biomaterials and Center for Advancing Electronics Dresden, Technische Universität Dresden, Dresden 01069, Germany
| |
Collapse
|
17
|
Wu T, Liang Q, Tang L, Tang J, Wang J, Shao B, Gong S, He Q, Pan Y, Liu Z. Construction of a novel S-scheme heterojunction piezoelectric photocatalyst V-BiOIO 3/FTCN and immobilization with floatability for tetracycline degradation. JOURNAL OF HAZARDOUS MATERIALS 2023; 443:130251. [PMID: 36327842 DOI: 10.1016/j.jhazmat.2022.130251] [Citation(s) in RCA: 20] [Impact Index Per Article: 20.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/09/2022] [Revised: 10/07/2022] [Accepted: 10/22/2022] [Indexed: 06/16/2023]
Abstract
A high-performance piezoelectric photocatalyst (V-BiOIO3/FTCN) was constructed to improve removal efficiency of tetracycline hydrochloride (TCH). The role of V-BiOIO3 in the composite was to introduce piezoelectric effect and construct S-scheme heterojunction photocatalyst with fish scale tubular carbon nitride (FTCN). The morphology, structure, chemical composition and optoelectronic characteristics of the as-prepared photocatalysts were studied by SEM, TEM, XRD, XPS and UV-Vis DRS. Combined with UV-Vis DRS, XPS valence band, Mott-schottky curve and theoretical calculations, the mechanism of TCH degradation was deeply analyzed. A series of degradation experiments showed that the V-BiOIO3/FTCN could effectively degrade TCH, and the removal efficiency was further improved under the action of ultrasound. Importantly, the further immobilized V-BiOIO3/FTCN/MS could float on the water surface to degrade TCH without additional stirring, which facilitated the recovery of photocatalysts and showed excellent practical application value. This work provided a reference for the design and immobilization of carbon nitride-based piezoelectric photocatalysts.
Collapse
Affiliation(s)
- Ting Wu
- College of Environmental Science and Engineering, Hunan University and Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082, PR China
| | - Qinghua Liang
- College of Environmental Science and Engineering, Hunan University and Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082, PR China
| | - Lin Tang
- College of Environmental Science and Engineering, Hunan University and Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082, PR China
| | - Jialin Tang
- College of Environmental Science and Engineering, Hunan University and Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082, PR China
| | - Jiajia Wang
- College of Environmental Science and Engineering, Hunan University and Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082, PR China
| | - Binbin Shao
- College of Environmental Science and Engineering, Hunan University and Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082, PR China
| | - Shanxi Gong
- School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004, PR China
| | - Qingyun He
- College of Environmental Science and Engineering, Hunan University and Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082, PR China
| | - Yuan Pan
- College of Environmental Science and Engineering, Hunan University and Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082, PR China
| | - Zhifeng Liu
- College of Environmental Science and Engineering, Hunan University and Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082, PR China.
| |
Collapse
|
18
|
Novel V-BiOIO3/g-C3N4/WC Schottky heterojunction with optimizing optical absorption and charge transfer for abatement of tetracycline antibiotics. J Photochem Photobiol A Chem 2023. [DOI: 10.1016/j.jphotochem.2023.114645] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/03/2023]
|
19
|
Cui P, Xue Y. Edge carboxylation-induced charge separation dynamics of graphene quantum dot/cellulose nanocomposites. Carbohydr Polym 2023; 299:120190. [PMID: 36876805 DOI: 10.1016/j.carbpol.2022.120190] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/10/2022] [Revised: 09/29/2022] [Accepted: 10/01/2022] [Indexed: 11/06/2022]
Abstract
Graphene quantum dot (GQD)@cellulose nanocomposites possess optoelectronic properties of interest for photovoltaic applications. However, the optoelectronic properties related to the shapes and edge types of GQDs have not been fully explored. In the present work, we investigate the effects of carboxylation on the energy alignment and charge separation dynamics at the interface of GQD@cellulose nanocomposites using density functional theory calculations. Our results show that the GQD@cellulose nanocomposites composed of hexagonal GQDs with armchair edges exhibit better photoelectric performance than those composed of other types of GQDs. Carboxylation stabilizes the energy level of the highest occupied molecular orbital (HOMO) of the triangular GQDs with armchair edges but destabilizes the HOMO energy level of cellulose, resulting in hole transfer from the GQDs to cellulose upon photoexcitation. However, the calculated hole transfer rate is lower than the nonradiative recombination rate because excitonic effects dominate the dynamics of charge separation in GQD@cellulose nanocomposites.
Collapse
Affiliation(s)
- Peng Cui
- School of New Materials and Shoes & Clothing Engineering, Liming Vocational University, Quanzhou 362000, Fujian Province, P.R. China; Nanotechnology Research Laboratory, Jiangnan University, Wuxi 214122, Jiangsu Province, P.R. China.
| | - Yuan Xue
- Nanotechnology Research Laboratory, Jiangnan University, Wuxi 214122, Jiangsu Province, P.R. China
| |
Collapse
|
20
|
Fang Y, Wu W, Zhao Y, Liu H, Li Z, Li X, Zhang M, Qin Y. Transcriptomic and metabolomic investigation of molecular inactivation mechanisms in Escherichia coli triggered by graphene quantum dots. CHEMOSPHERE 2023; 311:137051. [PMID: 36334733 DOI: 10.1016/j.chemosphere.2022.137051] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/29/2022] [Revised: 10/26/2022] [Accepted: 10/26/2022] [Indexed: 06/16/2023]
Abstract
Graphene quantum dots (GQDs), a novel broad-spectrum antibacterial agent, are considered potential candidates in the field of biomedical and food safety due to their outstanding antimicrobial properties and excellent biocompatibility. To uncover the molecular regulatory mechanisms underlying the phenotypes, the overall regulation of genes and metabolites in Escherichia coli (E. coli) after GQDs stimulation was investigated by RNA-sequencing and LC-MS. Gene transcription and metabolite expression related to a series of crucial biomolecular processes were influenced by the GQDs stimulation, including biofilm formation, bacterial secretion system, sulfur metabolism and nitrogen metabolism, etc. This study could provide profound insights into the GQDs stress response in E. coli, which would be useful for the development and application of GQDs in food safety.
Collapse
Affiliation(s)
- Yan Fang
- College of Life Science & Technology, Xinjiang University, Urumqi, 830017, China; Xinjiang Key Laboratory of Biological Resources and Genetic Engineering, Urumqi, 830017, China
| | - Wanfeng Wu
- College of Life Science & Technology, Xinjiang University, Urumqi, 830017, China; Xinjiang Key Laboratory of Biological Resources and Genetic Engineering, Urumqi, 830017, China
| | - Yan Zhao
- College of Life Science & Technology, Xinjiang University, Urumqi, 830017, China; Xinjiang Key Laboratory of Biological Resources and Genetic Engineering, Urumqi, 830017, China
| | - Haoqiang Liu
- College of Life Science & Technology, Xinjiang University, Urumqi, 830017, China; Xinjiang Key Laboratory of Biological Resources and Genetic Engineering, Urumqi, 830017, China
| | - Zongda Li
- College of Life Science & Technology, Xinjiang University, Urumqi, 830017, China; Xinjiang Key Laboratory of Biological Resources and Genetic Engineering, Urumqi, 830017, China
| | - Xinbo Li
- College of Life Science & Technology, Xinjiang University, Urumqi, 830017, China; Xinjiang Key Laboratory of Biological Resources and Genetic Engineering, Urumqi, 830017, China
| | - Minwei Zhang
- College of Life Science & Technology, Xinjiang University, Urumqi, 830017, China; Xinjiang Key Laboratory of Biological Resources and Genetic Engineering, Urumqi, 830017, China.
| | - Yanan Qin
- College of Life Science & Technology, Xinjiang University, Urumqi, 830017, China; Xinjiang Key Laboratory of Biological Resources and Genetic Engineering, Urumqi, 830017, China.
| |
Collapse
|
21
|
Xing D, Koubaa A, Tao Y, Magdouli S, Li P, Bouafif H, Zhang J. Copper-Doped Carbon Nanodots with Superior Photocatalysis, Directly Obtained from Chromium-Copper-Arsenic-Treated Wood Waste. Polymers (Basel) 2022; 15:polym15010136. [PMID: 36616484 PMCID: PMC9823717 DOI: 10.3390/polym15010136] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/25/2022] [Revised: 12/19/2022] [Accepted: 12/23/2022] [Indexed: 12/30/2022] Open
Abstract
An ecofriendly approach was developed for preparing copper-doped carbon dots (CDs) with superior photocatalysis using chromium-copper-arsenic (CCA)-treated wood waste as a precursor. Original wood (W-CDs), CCA-treated wood (C-CDs), and bioremediation CCA wood (Y-CDs) were used as the precursors. The chemical composition and structural, morphological, and optical properties, as well as the photocatalytic ability of the synthesized CDs varied with wood type. The C-CDs and W-CDs had similar characteristics: quasispherical in shape and with a diameter of 2 to 4.5 nm. However, the Y-CDs particles were irregular and stacked together, with a size of 1.5-3 nm. The presence of nitrogen prevented the formation of an aromatic structure for those CDs fabricated from bioremediation CCA wood. The three synthesized CDs showed a broad absorption peak at 260 nm and a weak absorption peak at 320 nm. Proof of the model study for the fabrication of luminescent CDs from CCA wood waste for bioimaging was provided. The degradation rate of CD photocatalytic MB was 97.8% for 30 min. Copper doping gives the CDs electron acceptor properties, improving their photocatalytic efficiency. This study provides novel ways to prepare nanomaterials from decommissioned wood as a nontoxic and low-cost alternative to fluorescent dots.
Collapse
Affiliation(s)
- Dan Xing
- Forest Research Institute, Université du Québec en Abitibi-Témiscamingue, Rouyn-Noranda, QC J9X 5E4, Canada
- State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology, Shandong Academy of Sciences, Jinan 250353, China
| | - Ahmed Koubaa
- Forest Research Institute, Université du Québec en Abitibi-Témiscamingue, Rouyn-Noranda, QC J9X 5E4, Canada
- Correspondence: (A.K.); (J.Z.)
| | - Yubo Tao
- State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology, Shandong Academy of Sciences, Jinan 250353, China
| | - Sara Magdouli
- Centre Technologique des Résidus Industriels (CTRI), 433 Boulevard du Collège, Rouyn-Noranda, QC J9X 0E1, Canada
| | - Peng Li
- State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology, Shandong Academy of Sciences, Jinan 250353, China
| | - Hassine Bouafif
- Centre Technologique des Résidus Industriels (CTRI), 433 Boulevard du Collège, Rouyn-Noranda, QC J9X 0E1, Canada
| | - Jingfa Zhang
- Forest Research Institute, Université du Québec en Abitibi-Témiscamingue, Rouyn-Noranda, QC J9X 5E4, Canada
- State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology, Shandong Academy of Sciences, Jinan 250353, China
- Correspondence: (A.K.); (J.Z.)
| |
Collapse
|
22
|
Ullah K, Oh WC. Fabrication of Novel Heterostructure-Functionalized Graphene-Based TiO 2-Sr-Hexaferrite Photocatalyst for Environmental Remediation. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 13:55. [PMID: 36615965 PMCID: PMC9824730 DOI: 10.3390/nano13010055] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/09/2022] [Revised: 12/16/2022] [Accepted: 12/20/2022] [Indexed: 06/17/2023]
Abstract
Novel visible-light photocatalyst (titanium-dioxide-functionalized graphene/strontium-hexaferrites) TiO2-FG/Sr-hexaferrite nanocomposites were fabricated using a simple hydrothermal technique. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), diffuse reflectance spectroscopy (DRS), transmission electron microscopy (TEM), Raman spectroscopic analysis, and atomic force microscopy were used to analyze the composites as prepared. The unique TiO2-FG/Sr-hexaferrite-based composite catalyst reveals superior photocatalytic properties for the disintegration of organic dyes methylene blue (MB) and rhodamine B (Rh. B) under visible-light irradiation. The result showed that the functionalized graphene with ternary structure improved the catalytic behavior of the composite due to the synergistic effect of the TiO2-FG boosted by the graphene surface to provide a fast conducting path to the photogenerated charge carrier. The markedly high photocatalytic behavior has been ascribed to the formation of the ternary structure between TiO2, FG, and Sr-hexaferrites through interface interaction. The prepared photocatalyst composite exhibited better recyclability, which further confirms its future uses as a photocatalyst in industrial waste products.
Collapse
Affiliation(s)
- Kefayat Ullah
- Department of Applied Physical and Material Sciences, University of Swat, Khyber 19120, Pakhtunkhwa, Pakistan
| | - Won-Chun Oh
- Department of Advanced Materials Science & Engineering, Hanseo University, Seosan-si 31962, Chungnam, Republic of Korea
| |
Collapse
|
23
|
Aizudin M, Alias NH, Ng YXA, Mahmod Fadzuli MH, Ang SC, Ng YX, Poolamuri Pottammel R, Yang F, Ang EH. Membranes prepared from graphene-based nanomaterials for water purification: a mini-review. NANOSCALE 2022; 14:17871-17886. [PMID: 36468603 DOI: 10.1039/d2nr05328d] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Graphene-based nanomaterials (GBnMs) are currently regarded as a critical building block for the fabrication of membranes for water purification due to their advantageous properties such as easy surface modification of functional groups, adjustable interlayer pore channels for solvent transportation, robust mechanical properties, and superior photothermal capabilities. By combining graphene derivatives with other emerging materials, heteroatom doping and rational design of a three-dimensional network can enhance water transportation and evaporation rates through channels of GBnM laminates and such layered structures have been applied in various water purification technologies. Herein, this mini-review summarizes recent progress in the synthesis of GBnMs and their applications in water treatment technologies, specifically, nanofiltration (NF) and solar desalination (SD). Finally, personal perspectives on the challenges and future directions of this promising nanomaterial are also provided.
Collapse
Affiliation(s)
- Marliyana Aizudin
- Natural Sciences and Science Education, National Institute of Education, Nanyang Technological University, Singapore 637616, Singapore.
| | - Nur Hashimah Alias
- Natural Sciences and Science Education, National Institute of Education, Nanyang Technological University, Singapore 637616, Singapore.
| | - Yun Xin Angel Ng
- Natural Sciences and Science Education, National Institute of Education, Nanyang Technological University, Singapore 637616, Singapore.
| | - Muhammad Haikal Mahmod Fadzuli
- Natural Sciences and Science Education, National Institute of Education, Nanyang Technological University, Singapore 637616, Singapore.
| | - Seng Chuan Ang
- Natural Sciences and Science Education, National Institute of Education, Nanyang Technological University, Singapore 637616, Singapore.
| | - Yi Xun Ng
- Natural Sciences and Science Education, National Institute of Education, Nanyang Technological University, Singapore 637616, Singapore.
| | | | - Fu Yang
- School of Environmental and Chemical Engineering, Jiangsu University of Science and Technology, Zhejiang 212003, China
| | - Edison Huixiang Ang
- Natural Sciences and Science Education, National Institute of Education, Nanyang Technological University, Singapore 637616, Singapore.
| |
Collapse
|
24
|
Abbas Q, Shinde PA, Abdelkareem MA, Alami AH, Mirzaeian M, Yadav A, Olabi AG. Graphene Synthesis Techniques and Environmental Applications. MATERIALS (BASEL, SWITZERLAND) 2022; 15:7804. [PMID: 36363396 PMCID: PMC9658785 DOI: 10.3390/ma15217804] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/23/2022] [Revised: 10/29/2022] [Accepted: 10/31/2022] [Indexed: 06/16/2023]
Abstract
Graphene is fundamentally a two-dimensional material with extraordinary optical, thermal, mechanical, and electrical characteristics. It has a versatile surface chemistry and large surface area. It is a carbon nanomaterial, which comprises sp2 hybridized carbon atoms placed in a hexagonal lattice with one-atom thickness, giving it a two-dimensional structure. A large number of synthesis techniques including epitaxial growth, liquid phase exfoliation, electrochemical exfoliation, mechanical exfoliation, and chemical vapor deposition are used for the synthesis of graphene. Graphene prepared using different techniques can have a number of benefits and deficiencies depending on its application. This study provides a summary of graphene preparation techniques and critically assesses the use of graphene, its derivates, and composites in environmental applications. These applications include the use of graphene as membrane material for the detoxication and purification of water, active material for gas sensing, heavy metal ions detection, and CO2 conversion. Furthermore, a trend analysis of both synthesis techniques and environmental applications of graphene has been performed by extracting and analyzing Scopus data from the past ten years. Finally, conclusions and outlook are provided to address the residual challenges related to the synthesis of the material and its use for environmental applications.
Collapse
Affiliation(s)
- Qaisar Abbas
- Sustainable Energy & Power Systems Research Centre, RISE, University of Sharjah, Sharjah 27272, United Arab Emirates
- School of Engineering, Computing & Physical Sciences, University of the West of Scotland, Paisley PA1 2BE, UK
| | - Pragati A. Shinde
- Sustainable Energy & Power Systems Research Centre, RISE, University of Sharjah, Sharjah 27272, United Arab Emirates
| | - Mohammad Ali Abdelkareem
- Sustainable Energy & Power Systems Research Centre, RISE, University of Sharjah, Sharjah 27272, United Arab Emirates
- Chemical Engineering Department, Minia University, Minya 61519, Egypt
| | - Abdul Hai Alami
- Sustainable Energy & Power Systems Research Centre, RISE, University of Sharjah, Sharjah 27272, United Arab Emirates
| | - Mojtaba Mirzaeian
- School of Engineering, Computing & Physical Sciences, University of the West of Scotland, Paisley PA1 2BE, UK
- Faculty of Chemistry and Chemical Technology, Al-Farabi Kazakh National University, Al-Farabi Avenue, 71, Almaty 050012, Kazakhstan
| | - Arti Yadav
- School of Engineering, Newcastle University, Newcastle upon Tyne NE1 7RU, UK
| | - Abdul Ghani Olabi
- Sustainable Energy & Power Systems Research Centre, RISE, University of Sharjah, Sharjah 27272, United Arab Emirates
- Mechanical Engineering and Design, School of Engineering and Applied Science, Aston University Aston Triangle, Birmingham B4 7ET, UK
| |
Collapse
|
25
|
Xie Y, Hu J, Esmaeili H, Wang D, Zhou Y. A review study on wastewater decontamination using nanotechnology: Performance, mechanism and environmental impacts. POWDER TECHNOL 2022. [DOI: 10.1016/j.powtec.2022.118023] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/31/2022]
|
26
|
Mahmoud ME, Amira MF, Daniele S, El Nemr A, Abouelanwar ME, Morcos BM. Adsorptive removal of Ag/Au quantum dots onto covalent organic frameworks@magnetic zeolite@arabic gum hydrogel and their catalytic microwave-Fenton oxidative degradation of Rifampicin antibiotic. J Colloid Interface Sci 2022; 624:602-618. [PMID: 35691228 DOI: 10.1016/j.jcis.2022.05.132] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/06/2022] [Revised: 05/17/2022] [Accepted: 05/22/2022] [Indexed: 11/16/2022]
Abstract
Recent progress in nanotechnology via incorporation of small particle size as quantum dots (QDs) (1-10 nm) in many industrial activities and commercial products has led to significant undesired environmental impacts. Therefore, QDs removal from wastewater represents an interesting research topic with a lot of challenges for scientists and engineers nowadays. In this work, the coagulative removal of metal quantum dots as silver and gold from industrial water samples is explored. A novel biosorbent was assembled via binding of covalent organic frameworks (COFs) with magnetic zeolite and Arabic gum hydrogel (COFs@MagZ@AGH) as a promising removal material for Ag-QDs and Au-QDs. This was fully characterized by EDX, SEM, TEM, FT-IR, XPS, XRD and surface area and applied in coagulative removal of Au-QDs and Ag-QDs in presence of several experimental factors as pH, presence of other electrolytes, stirring time, initial QDs concentration, coagulant dosage, and temperature in order to optimize the removal processes. At optimum conditions, COFs@MagZ@AGH was able to recover 99.19% and 87.57% of Ag-QDs and Au-QDs QDs, respectively via chemical adsorption mechanism with perfect fitting to pseudo-second order model. Reuse of the recovered Ag/Au-QDs@COFs@MagZ@AGH as efficient catalysts in catalytic degradation of Rifampicin antibiotic (Rf) from water was additionally investigated and optimized via microwave-Fenton catalysts with excellent oxidative degradation efficiency (100%). Reusability and applicability of the biosorbent (COFs@MagZ@AGH) and catalysts (Ag/Au-QDs@COFs@MagZ@AGH) in real industrial water samples were also explored and successfully accomplished.
Collapse
Affiliation(s)
- Mohamed E Mahmoud
- Faculty of Sciences, Chemistry Department, Alexandria University, P.O. Box 426, Ibrahimia 21321, Alexandria, Egypt.
| | - Mohamed F Amira
- Faculty of Sciences, Chemistry Department, Alexandria University, P.O. Box 426, Ibrahimia 21321, Alexandria, Egypt
| | - Stéphane Daniele
- Univ Lyon, Université Claude Bernard Lyon 1, CNRS, IRCELYONUMR 5256, 2 Avenue Albert Einstein, 69626 Villeurbanne, France
| | - Ahmed El Nemr
- Environmental Division, National Institute of Oceanography and Fisheries, Kayet Bey, El-Anfoushy, Alexandria, Egypt
| | - Magda E Abouelanwar
- Faculty of Sciences, Chemistry Department, Alexandria University, P.O. Box 426, Ibrahimia 21321, Alexandria, Egypt; Univ Lyon, Université Claude Bernard Lyon 1, CNRS, IRCELYONUMR 5256, 2 Avenue Albert Einstein, 69626 Villeurbanne, France
| | - Bishoy M Morcos
- Faculty of Sciences, Chemistry Department, Alexandria University, P.O. Box 426, Ibrahimia 21321, Alexandria, Egypt
| |
Collapse
|
27
|
Zaki AH, Motagaly ATA, Khaled R, Lee MJ, Farghali AA, Shehata N. Economic and facile approach for synthesis of graphene-titanate nanocomposite for water reclamation. JOURNAL OF CONTAMINANT HYDROLOGY 2022; 250:104052. [PMID: 35908294 DOI: 10.1016/j.jconhyd.2022.104052] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/08/2022] [Revised: 06/03/2022] [Accepted: 07/18/2022] [Indexed: 06/15/2023]
Abstract
Graphene and its composites with semiconductor materials have been received highly attention in many research areas because of their unique properties. Efficient application of graphene is hindered by the lack of cost-effective synthesis methods. In this work, an economic and facile route for mass production of graphene-titanate nanocomposite has been discussed. Graphene was prepared by exfoliation of graphite powder in 40% ethanol aqueous solution. Titanate nanotubes were grown on graphene sheets by hydrothermal method, where the dispersed graphene sheets were mixed with titanate solution and then placed in autoclave and placed in oven for 16 h at 160 °C. The prepared composite was characterized by transmission electron microscope (TEM), scanning electron microscope (SEM), Fourier transforms infrared spectroscopy (FTIR), thermogravimetric analysis (TGA). All the obtained results confirmed the synthesis of graphene and its composite with titanate in highly uniform and pure form. The adsorption efficiency of the prepared composite was tested using methylene blue (MB) as a model dye. The adsorption isotherm was investigated using Freundlich and Langmuir models. The adsorption capacity of MB was 270.27 mg/g. The obtained correlation coefficients (R2) by Freundlich and Langmuir model were 0.996 and 0.973, respectively. The adsorption kinetics was investigated and discussed using different models. The thermal stability of the developed composite is improved after MB adsorption.
Collapse
Affiliation(s)
- A H Zaki
- Materials Science and Nanotechnology Dept., Faculty of Postgraduate Studies for Advanced Sciences, Beni-Suef University, Egypt; Department of Chemical Engineering, National Taiwan University of Science and Technology, 43 Keelung Road, Section 4, Taipei 106-07, Taiwan.
| | - A T Abdel Motagaly
- Materials Science and Nanotechnology Dept., Faculty of Postgraduate Studies for Advanced Sciences, Beni-Suef University, Egypt
| | - Rehab Khaled
- Chemistry Department, Faculty of Science, Beni-Suef University, Beni-Suef, Egypt
| | - Ming-Jer Lee
- Department of Chemical Engineering, National Taiwan University of Science and Technology, 43 Keelung Road, Section 4, Taipei 106-07, Taiwan
| | - A A Farghali
- Materials Science and Nanotechnology Dept., Faculty of Postgraduate Studies for Advanced Sciences, Beni-Suef University, Egypt
| | - Nabila Shehata
- Environmental Science and Industrial Development Department, Faculty of Postgraduate Studies for Advanced Sciences, Beni-Suef University, Egypt.
| |
Collapse
|
28
|
Zhao Z, Wang X, Wang S, Xiao Z, Zhai S, Ma J, Dong X, Sun H, An Q. Three-Dimensional Hierarchical Seaweed-Derived Carbonaceous Network with Designed g-C 3N 4 Nanosheets: Preparation and Mechanism Insight for 4-Nitrophenol Photoreduction. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:11054-11067. [PMID: 36049185 DOI: 10.1021/acs.langmuir.2c01700] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
The development of g-C3N4-based photocatalysts with abundant active sites is of great significance for photocatalytic reactions. Herein, a smart and robust strategy was presented to fabricate three-dimensional (3D) g-C3N4 nanosheet-coated alginate-based hierarchical porous carbon (g-C3N4@HPC), including coating melamine on calcium alginate (CA) hydrogel beads, freeze-drying hydrogel beads as well as pyrolysis at high temperatures. The resulting photocatalyst possessed a significantly high surface area and a large amount of interconnected macropores compared with porous carbon without the melamine coating. The unique structural features could effectively inhibit the curling and agglomeration of g-C3N4 nanosheets, provide abundant photocatalytic active sites, and promote mass diffusion. Therefore, the g-C3N4@HPC composite exhibited remarkable photocatalytic activity and outstanding stability toward the photoreduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) by NaBH4 under natural sunlight and simulated visible-light irradiation (λ > 420 nm) using a 300 W xenon lamp. Moreover, the mechanism toward the photocatalytic reaction was extensively studied by quenching experiments and electron spin resonance (ESR) experiments. The results showed that active hydrogen species were able to be achieved by following a dual-channel pathway in the NaBH4 system, which included photocatalytic reduction of H+ ions and photocatalytic oxidation of BH4- ions. This work not only opens up a new way to design efficient photocatalysts for various reactions but also provides a reference for an in-depth study of the photoreduction mechanism.
Collapse
Affiliation(s)
- Zhenyu Zhao
- Liaoning Key Lab of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, P. R. China
| | - Xuting Wang
- Liaoning Key Lab of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, P. R. China
| | - Shifu Wang
- State Key Laboratory of Catalysis, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023, P. R. China
| | - Zuoyi Xiao
- Liaoning Key Lab of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, P. R. China
| | - Shangru Zhai
- Liaoning Key Lab of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, P. R. China
| | - Jiliang Ma
- Liaoning Key Lab of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, P. R. China
| | - Xiaoli Dong
- Liaoning Key Lab of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, P. R. China
| | - Haodong Sun
- Liaoning Key Lab of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, P. R. China
| | - Qingda An
- Liaoning Key Lab of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, P. R. China
| |
Collapse
|
29
|
Liang Y, Tao Y, Cao C, Liu Y, Xu H, Yu J, Tao J, Li G, Wang Y. Dye‐Sensitization‐Enhanced Photocatalytic Activity of BiOCl/Sulfur Quantum Dot Heterojunction under Visible‐Light Irradiation. Eur J Inorg Chem 2022. [DOI: 10.1002/ejic.202200443] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Yuting Liang
- Research Institute of Applied Catalysis School of Chemical and Environmental Engineering Shanghai Institute of Technology Shanghai 201418 P. R. China
| | - Ying Tao
- Key Laboratory of Resource Chemistry of Ministry of Education School of Environmental and Geographical Sciences Shanghai Normal University Shanghai 200234 P. R. China
| | - Congli Cao
- Research Institute of Applied Catalysis School of Chemical and Environmental Engineering Shanghai Institute of Technology Shanghai 201418 P. R. China
| | - Yunni Liu
- Key Laboratory of Resource Chemistry of Ministry of Education School of Environmental and Geographical Sciences Shanghai Normal University Shanghai 200234 P. R. China
| | - Hu Xu
- Research Institute of Applied Catalysis School of Chemical and Environmental Engineering Shanghai Institute of Technology Shanghai 201418 P. R. China
| | - Jun Yu
- Research Institute of Applied Catalysis School of Chemical and Environmental Engineering Shanghai Institute of Technology Shanghai 201418 P. R. China
| | - Jianwei Tao
- Research Institute of Applied Catalysis School of Chemical and Environmental Engineering Shanghai Institute of Technology Shanghai 201418 P. R. China
| | - Guisheng Li
- Key Laboratory of Resource Chemistry of Ministry of Education School of Environmental and Geographical Sciences Shanghai Normal University Shanghai 200234 P. R. China
| | - Yuhong Wang
- Research Institute of Applied Catalysis School of Chemical and Environmental Engineering Shanghai Institute of Technology Shanghai 201418 P. R. China
| |
Collapse
|
30
|
Photo-Fenton Degradation of Ciprofloxacin by Novel Graphene Quantum Dots/α-FeOOH Nanocomposites for the Production of Safe Drinking Water from Surface Water. WATER 2022. [DOI: 10.3390/w14142260] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/27/2023]
Abstract
In the current work, novel graphene quantum dots (GQDs)-doped goethite (α-FeOOH) nanocomposites (GQDs/α-FeOOH) were prepared by following a feasible hydrolysis method and applied for ciprofloxacin (CIP) removal. Results showed that the CIP degradation efficiency was significant (93.73%, 0.0566 min−1) in the GQDs/α-FeOOH + H2O2 + Vis system using much lower amounts of H2O2 (0.50 mM), which is 3.9 times the α-FeOOH + H2O2 + Vis system. It was found that •OH, O2•−, and 1O2 were mainly responsible for CIP degradation in the GQDs/α-FeOOH photo-Fenton system. GQDs/α-FeOOH demonstrated broad-spectrum UV–vis-IR responsiveness in the degradation of ciprofloxacin as a function of the doping of GQDs. Additionally, GQDs/α-FeOOH showed outstanding durability (recyclability up to 3 cycles with a lower iron leaking amount, 0.020 mg L−1), a broad range of application pH, and a pretty acceptable catalytic efficacy in a variety of surface water matrices. Overall, GQDs/α-FeOOH have been shown to be an effective photocatalyst for the remediation of emerging contaminants via the workable exploitation of solar energy.
Collapse
|
31
|
Preparation, Characterization, and Catalytic Properties of Pd-Graphene Quantum Dot Catalysts. Catalysts 2022. [DOI: 10.3390/catal12060619] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
Abstract
In this study, Pd-graphene quantum dot (Pd-GQD) catalysts were prepared by depositing Pd nanoparticles onto functionalized GQD surfaces, and their morphology and elemental composition were characterized using transmission electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy. The as-prepared Pd-GQD was subsequently employed as a catalyst for the Heck and decarboxylative cross-coupling reactions and was found to exhibit higher catalytic activity than other reference systems. The expanded substrate scope of various substituted aryl iodides further proved that the GQD is an effective support for preparing new heterogeneous catalysts with improved catalytic performances.
Collapse
|
32
|
Sun J, Yang J, Liang J, Tu L, Bin Y, Hou Y. Construction of microspherical flower-like Zn3In2S6-BGQDs/AgBr S-scheme heterojunction for photocatalytic elimination of nitrofurazone and Cr (VI). Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.121563] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|