Transport and deposition behaviors of microplastics in porous media: Co-impacts of N fertilizers and humic acid

Transport of polystyrene microplastics in bare and iron oxide-coated quartz sand: Effects of ionic strength, humic acid, and co-existing graphene oxide

This research explored the effects of widely utilized nanomaterial graphene oxide (GO) and organic matter humic acid (HA) on the transport of microplastics under different ionic solution strengths in bare sand and iron oxide-coated sand. The results found transport of polystyrene microplastics (PS) did not respond to the presence of HA in sand that contains large amounts of iron oxide. Compared to bare quartz sand, ionic strength had little effect: <20 % of PS passed through Fe sand columns. There was a significant promotion of PS transport in the presence of GO, however, which can be attributed to the increased surface electronegativity of PS and steric hindrance. Moreover, GO combined with HA significantly promoted the transport of PS in the Fe sand, and transport further increased when the concentration of HA increased from 5 to 10 mg/L. Interestingly, the degree of this increase exactly corresponded to the change in the surface charge of the microplastics, demonstrating that electrostatic interaction dominated the PS transport. Further results indicated that co-existing pollutants had significant impacts on the transport of microplastics under various conditions by altering the surface characteristics of the plastic particles and the spatial steric hindrance within porous media. This research will offer insights into predicting the transport and fate of microplastics in complex environments.

Effects of arsenic on the transport and attachment of microplastics in porous media

Understanding the impact of arsenic (As(III), inorganic pollutant widely present in natural environments) on microplastics (MPs, one type of emerging contaminants) mobility is essential to predict MPs fate and distribution in soil-groundwater systems, yet relevant research is lacking. This study explored the effects of As(III) copresent in suspensions (0.05, 0.5, and 5 mg/L) on MPs transport/attachment behaviors in porous media containing varied water contents (θ = 100 %, 90 %, and 60 %) under different ionic strengths (5, 10, and 50 mM NaCl) and flow rates (2, 4, and 8 m/day). Despite solution ionic strengths, flow rates, porous media water contents, sizes, and surface charges of MPs, with coexisting humic acid, and in actual water samples, As(III) of three concentrations increased MPs transport in quartz sand and natural sandy soil. The increased electrostatic repulsion between MPs and sand caused by the altered MPs surface charge via the adsorption of As(III) together with steric repulsion from As(III) in solution contributed to the promoted MPs mobility in porous media. The occupying attachment sites by As(III) partially contributed to the increased mobility of MPs with negative surface charge in porous media. Clearly, As(III) coexisting in suspensions would enhance MPs transport in porous media, increasing MPs environment risks.

Microplastics/nanoplastics in porous media: Key factors controlling their transport and retention behaviors

Till now, microplastics/nano-plastics(M/NPs) have received a lot of attention as emerging contaminant. As a typical but complex porous medium, soil is not only a large reservoir of M/NPs but also a gateway for M/NPs to enter groundwater. Therefore, the review of the factors controlling the transport behavior of M/NPs in porous media can provide important guidance for the risk assessment of M/NPs in soil and groundwater. In this study, the key factors controlling the transport behavior of M/NPs in porous media are systematically divided into three groups: (1) nature of M/NPs affecting M/NPs transport in porous media, (2) nature of flow affecting M/NPs transport in porous media, (3) nature of porous media affecting M/NPs transport. In each group, the specific control factors for M/NPs transport in porous media are discussed in detail. In addition to the above factors, some substances (colloids or pollutants) present in natural porous media (such as soil or sediments) will co-transport with M/NPs and affect its mobility. According to the different properties of co-transported substances, the mechanism of promoting or inhibiting the migration behavior of M/NPs in porous media was discussed. Finally, the limitations and future research directions of M/NPs transport in porous media are pointed out. This review can provide a useful reference for predicting the transport of M/NPs in natural porous media.

Co-impacts of cation type and humic acid on migration of polystyrene microplastics in saturated porous media

The aging process of microplastics (MPs) could significantly change their physical and chemical characteristics and impact their migration behavior in soil. However, the complex effects of different cations and humic acids (HA) on the migration of aged MPs through saturated media are not clear. In this research, the migration and retention of pristine/aged PSMPs (polystyrene microplastics) under combined effects of cations (Na+, Ca2+) (ionic strength = 10 mM) and HA (0, 5, 15 mg/L) were investigated and analyzed in conjunction with the two-site kinetic retention model and DLVO theory. The findings showed that the aging process accelerated PSMPs migration under all tested conditions. Aged PSMPs were less susceptible to Ca2+ than pristine PSMPs. Under Ca2+ conditions, pristine/aged PSMPs showed higher retention than under Na+ conditions in the absence of HA. Furthermore, under Na+ conditions, the migration of aged PSMPs significantly increased at higher concentrations of HA. However, under Ca2+ conditions, the migration of aged PSMPs decreased significantly at higher concentrations of HA. In higher HA conditions, HA, Ca2+, and PSMPs interact to cause larger aggregations, resulting in the sedimentation of aged PSMPs. The DLVO calculations and two-site kinetic retention models' results showed the detention of PSMPs was irreversible under higher HA conditions (15 mg/L) with Ca2+, and aged PSMPs were more susceptible to clogging. These findings may help to understand the potential risk of migration behavior of PSMPs in the soil-groundwater environment.

Statuses, shortcomings, and outlooks in studying the fate of nanoplastics and engineered nanoparticles in porous media respectively and borrowable sections from engineered nanoparticles for nanoplastics

This review discussed the research statuses, shortcomings, and outlooks for the fate of nanoplastics (NPs) and engineered nanoparticles (ENPs) in porous media and borrowable sections from ENPs for NPs. Firstly, the most important section was that we reviewed the research statuses on the fate of NPs in porous media and the main influencing factors, and explained the influencing mechanisms. Secondly, in order to give NPs a reference of research ideas and influence mechanisms, we also reviewed the research statuses on the fate of ENPs in porous media and the factors and mechanisms influencing the fate. The main mechanisms affecting the transport of ENPs were summarized (Retention or transport modes: advection, diffusion, dispersion, deposition, adsorption, blocking, ripening, and straining; Main forces and actions: Brownian motion, gravity, electrostatic forces, van der Waals forces, hydration, filtration, bridging; Affecting elements of the forces and actions: the ENP and media grain surface functional groups, size, shape, zeta potential, density, hydrophobicity, and roughness). Instead of using the findings of ENPs, thorough study on NPs was required because NPs and ENPs differed greatly. Based on the limited existing studies on the NP transport in porous media, we found that although the conclusions of ENPs could not be applied to NPs, most of the influencing mechanisms summarized from ENPs were applicable to NPs. Combining the research thoughts of ENPs, the research statuses of NPs, and some of our experiences and reflections, we reviewed the shortcomings of the current studies on the NP fate in porous media as well as the outlooks of future research. This review is very meaningful for clarifying the research statuses and influence mechanisms for the NP fate in porous media, as well as providing a great deal of inspiration for future research directions about the NP fate in porous media.

Mechanisms of increased small nanoplastic particle retention in water-saturated sand media with montmorillonite and diatomite: Particle sizes, water components, and modelling

The processes by which small nanoplastics (NPs) accumulate in soil are unclear. To clarify the different deposition processes that affect small NPs (< 30 nm) compared to larger NPs in the soil environment, due to their interaction with clays as major soil components, the transport behavior of two-sized NPs (20 and 80 nm) with two clays (diatomite (Diat) and montmorillonite (Mont)) in NaCl and CaCl2 solutions were investigated in water-saturated quartz sand columns. The experimental results showed that more 20 nm NPs could enter the lattice structure of Diat than Mont in NaCl solution. This contributed to the stronger deposition of 20 nm NPs by Diat on sand, which was associated with a lower k1d/k1 value (obtained from two-site kinetic attachment model). In contrast, 80 nm NPs had a stronger reversible retention than 20 nm NPs with Mont, even though both sizes of NPs-Mont displayed a similar transportability. In CaCl2 solution, the larger NPs-Mont hetero-aggregates formed with a stronger suppressed depth of φmax based on Derjaguin-Landau-Verwey-Overbeek theory. Thus, Mont had a stronger transport inhibition than Diat for both NPs sizes, with a lower k1d/k1. These findings could benefit in predicting the size-based deposition of NPs in a heterogenous soil environment.

Bibliometric analysis and systematic review of the adherence, uptake, translocation, and reduction of micro/nanoplastics in terrestrial plants

Micro/nanoplastics are emerging agricultural pollutants globally. Micro/nanoplastics can adhere to terrestrial plant surfaces, be absorbed and transported by plants, and accumulate in the edible parts of plants, leading to the possibility of enrichment and transmission through the food chain and threatening human health. However, the underlying mechanism remains unclear. With increased studies on the internalization of micro/nanoplastics in terrestrial plants, a comprehensive and systematic review summarizing the current research trends and progress is warranted to provide a reference for further relevant research. Based on bibliometric analysis, this study focused on the mechanisms, study methods, and reduction techniques of micro/nanoplastics adherence, uptake, and translocation by terrestrial plants. The results showed that micro/nanoplastics can adhere to the surfaces of plant tissues such as seeds, roots, and leaves. Root uptake (root-to-leaf translocation) and foliar uptake (leaf-to-root translocation) are the two simultaneous internalization pathways of MNPs in plants. The observation methods included scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM), pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS), and inductively coupled plasma-mass spectrometry (ICP-MS). We highlighted the necessity and urgency of reducing the uptake and translocation of MNPs by plants and found that the application of silicon may be a promising approach for reducing internalization. This study identifies current knowledge gaps and proposes possible future needs.

Nano- and micro-plastic transport in soil and groundwater environments: Sources, behaviors, theories, and models

With the increasing use of plastics, nano- and micro-plastic (NMP) pollution has become a hot topic in the scientific community. Ubiquitous NMPs, as emerging contaminants, are becoming a global issue owing to their persistence and potential toxicity. Compared with studies of marine and freshwater environments, investigations into the sources, transport properties, and fate of NMPs in soil and groundwater environments remain at a primary stage. Hence, the promotion of such research is critically important. Here, we integrate existing information and recent advancements to compile a comprehensive evaluation of the sources and transport properties of NMPs in soil and groundwater environments. We first provide a systematic description of the various sources and transport behaviors of NMPs. We then discuss the theories (e.g., clean-bed filtration and Derjaguin-Landau-Verwey-Overbeek theories) and models (e.g., single-site and dual-site kinetic retention and transport models) of NMP transport through saturated porous media. Finally, we outline the potential limitations of current research and suggest directions for future research. Overall, this review intends to assimilate and outline current knowledge and provide a useful reference frame to determine the sources and transport properties of NMPs in soil and groundwater environments.

Interplay of compound pollutants with microplastics transported in saturated porous media: Effect of co-existing graphene oxide and tetracycline

Co-existence of microplastics, nanomaterials, and antibiotics may lead to intensified multifaceted pollution, which may influence their fate in soils. This study investigated the co-transport behavior of polystyrene microplastics (PS) and compound pollutants of graphene oxide (GO) and tetracycline (TC). Packed column experiments for microplastic with or without combined pollutants were performed in KCl (10 and 30 mM) and CaCl2 solutions (0.3 and 1 mM). The results showed transport of PS was facilitated at low ionic strengths and inhibited at high ionic strengths by GO with or without TC under examined conditions. Carrier effect of GO as well as the aggregation of PS in the presence of co-exiting GO or GO-TC could be the contributor. Although the existence of TC relieved the ripening phenomenon of PS and GO deposition due to enhanced electronegativity of sand media, the effect of GO on the PS transport has not been significantly impacted, indicating the dominant role of GO during cotransport process. Furthermore, the transport of PS was increased by TC owing to competition for deposition sites on sand surfaces. In turn, the transport of TC was mainly affected by PS whether graphene was present or not. The increase in electrostatic repulsive force (transport-promoting) and addition adsorption sites (transport-inhibiting) may be responsible for the observations. Our findings could improve understandings of complex environmental behaviors of microplastics and provide insight into investigation on cotransport of emerging contaminants under various conditions relevant to the subsurface environment.

Effect of Metal Cations on Colloids-Microcystin-LR Interaction

Colloidal particles, mixture with continuous molecular weight distribution and multiple organic components, is widespread in lake and have significant impact on the retention, migration, transportation, and fate of contaminants in lake ecosystems. Here we extract sedimentary colloids from algal growth dominant area (AD) in Taihu Lake and further separated into four different particle size ranges by cross-flow ultra-filtration (CFUF). The interaction mechanism between colloids and Microcystin-LR (MC-LR) was investigated under different cation conditions by dialysis equilibrium experiment method. Adsorption kinetics research shows the adsorption of MC-LR by colloids follows second-order kinetics and can be simulated by Freundlich isotherms. The effects of different cations on colloids-MC-LR interaction shows the addition of Mg(II) decreased colloids-MC-LR interaction, while Cu(II) increased colloids-MC-LR binding. MC-LR also increased Cu(II) binding to colloids, while MC-LR decreased Mg(II) binding. Therefore, different effect of cations to colloids-MC-LR interaction was proposed.

Effects of neonicotinoid insecticides on transport of non-degradable agricultural film microplastics

Mulch film microplastics (MPs) could act as a vector for agricultural chemicals due to their long-term presence in farmland environments. As a result, this study focuses on the adsorption mechanism of three neonicotinoids on two typical agricultural film MPs, polyethylene (PE) and polypropylene (PP), as well as the effects of neonicotinoids on the MPs transport in quartz sand saturated porous media. The findings revealed that the adsorption of neonicotinoids on PE and PP was a combination of physical and chemical processes, including hydrophobic, electrostatic and hydrogen bonding. Acidity and appropriate ionic strength (IS) were favorable conditions for neonicotinoid adsorption of on MPs. The results of column experiments showed that the presence of neonicotinoids, particularly at low concentrations (0.5 mmol L^-1), could promote the transport of PE and PP in the column by improving the electrostatic interaction and hydrophilic repulsion of particles. The neonicotinoids would be adsorbed on MPs through hydrophobic action preferentially, whereas excessive neonicotinoids could cover the hydrophilic functional groups on the surface of MPs. Neonicotinoids reduced the response of PE and PP transport behavior to pH changes. 0.005 mol L^-1 NaCl ameliorated the migration of MPs by increasing their stability. Because of its highest hydration ability and the bridging effect of Mg²⁺, Na⁺ had the most prominent transport promoting effect on PE and PP in MPs-neonicotinoid. This study shows that the increased environmental risk caused by the coexistence of microplastic particles and agricultural chemicals is unneglectable.

Cotransport of different electrically charged microplastics with PFOA in saturated porous media

The fate and transport behavior of microplastics (MPs), emerging colloidal contaminant ubiquitous in natural environments, would be greatly affected by other copresent pollutants. PFOA (emerging surfactant pollutant) would interact with MPs after encounter with them in natural environments, which could alter the transport behavior of both pollutants. Relevant knowledge is still lacking, affecting accurate prediction the fate and distribution of these two emerging contaminants in natural porous media. The cotransport behavior of different surface charged MPs (negatively/positively charged, CMPs/AMPs) with PFOA (three concentrations ranged from 0.1 to 10 mg/L) in porous media in both 10 and 50 mM NaCl solutions thus was investigated in the present study. We found PFOA inhibited CMPs transport in porous media, while enhanced AMPs transport. The mechanisms leading to the altered transport of CMPs/AMPs caused by PFOA were found to be different. The decreased electrostatic repulsion between CMPs-sand induced by the decreased CMPs negative zeta potentials via the adsorption of PFOA led to the inhibited transport of CMPs in CMPs-PFOA suspension. The enhanced electrostatic repulsion between AMPs-sand due to the decreased positive charge of AMPs via the adsorption of PFOA together with steric repulsion induced by suspended PFOA resulted in the increased transport of AMPs in AMPs-PFOA suspension. Meanwhile, we found that the adsorption onto MPs surfaces also impacted the transport of PFOA. Due to the lower mobility of MPs than PFOA, the presence of MPs despite their surface charge decreased the transport of PFOA of all examined concentrations in quartz sand columns. This study demonstrates that when MPs and PFOA are co-existing in environments, their interaction with each other will alter the fate and transport behavior of both pollutants in porous media and the alteration is highly correlated with the amount of PFOA adsorbed onto MPs and original surface properties of MPs.

Starch-based controlled release fertilizers: A review

Starch, as a widely available renewable resource, has the potential to be used in the production of controlled-release fertilizers (CRFs) that support sustainable agriculture. These CRFs can be formed by incorporating nutrients through coating or absorption, or by chemically modifying the starch to enhance its ability to carry and interact with nutrients. This review examines the various methods of creating starch-based CRFs, including coating, chemical modification, and grafting with other polymers. In addition, the mechanisms of controlled release in starch-based CRFs are discussed. Overall, the potential benefits of using starch-based CRFs in terms of resource efficiency and environmental protection are highlighted.

Transport of plastic particles in natural porous media under freeze-thaw treatment: Effects of porous media property

Freeze-thaw (FT) cycles would alter physical and chemical properties of soil and thus influence the transport of plastic particles (one type of emerging contaminant with great concerns). This study was designed to investigate the effects of FT treatment on the mobility of plastic particles (nanoplastics as representative) in columns packed with natural soils (i.e. loamy sand and sandy soil, quartz sand employed as comparison). We found that FT treatment of different types of porous media would induce different transport behaviors of plastic particles. Specifically, FT treatment of quartz sand did not affect plastic particles mobility. While FT treatment of loamy sand and sandy soil increased plastic particles transport. The increased pore sizes and disintegration of small soil particles from soils (the detached soil would serve as mobile vehicle for the transport of plastic particle) led to the facilitated mobility of plastic particles in two types of soils after FT treatment. The presence of preferential flow paths induced by FT treatment also drove to the enhanced mobility of plastic particles in sandy soil with FT treatment. This study clearly showed that the mobility of model plastic particles in two types of natural soils was greatly enhanced by FT treatment.

Interactions of microplastics and soil pollutants in soil-plant systems

In recent years, increasing studies have been reported on characterization and detection of microplastics (MPs), and their interactions with organic pollutants (OPs) and heavy metals (HMs) in soils. However, a comprehensive review on the characteristics and factors that influence MPs distribution in soils, the sorption characteristics and mechanisms of soil contaminants by MPs, especially the interactions of MPs and their complexes with pollutants in the soil-plant systems remains rarely available at present. This review focuses on the sorption features and mechanisms of pollutants by MPs in soil and discussed the effects of MPs and their complexing with pollutants on soil properties, microbe and plants. The polarity of MPs significantly influenced the sorption of OPs, and different sorption mechanisms are involved for the hydrophobic and hydrophilic OPs. The sorption of OPs on MPs in soils is different from that in water. Aging of MPs can promote the sorption and migration of contaminants. The enhanced effects of biofilm in microplastisphere on the sorption of pollutants by MPs are critical, and interactions of soil environment-MPs-microbe-HMs-antibiotics increase the potential pathogens and larger release of resistance genes. The coexistence of HMs and MPs affected the growth of plants and the uptake of HMs and MPs by the plants. Moreover, the type, dose, shape and particle size of MPs have important influences on their interactions with pollutants and subsequent effects on soil properties, microbial activities and plant growth. This review also pointed out some knowledge gaps and constructive countermeasures to promote future research in this field.

Effects of solution chemistry and humic acid on transport and deposition of aged microplastics in unsaturated porous media

Microplastics (MPs) are susceptible to aging in the environment, and aged MPs are highly migratory in soil due to their smaller particle size and more negative surface charge, but the effects of soil environmental factors on the fate and transport of aged MPs are still unclear. In this study, the transport behavior of pristine/aged MPs in unsaturated sandy porous media was examined under different ionic strength (IS), cationic type (Na⁺, Ca²⁺) and humic acid (HA) conditions. The results indicated that the surface charge, surface oxygen-containing functional groups and surface morphology of MPs changed significantly after aging, and that the mobility of aged MPs was significantly enhanced than the pristine MPs under all test conditions. The retention amounts of pristine/aged MPs in unsaturated porous media increased with IS, and IS had a less inhibitory effect on the transport of aged MPs than pristine MPs. The mobility of pristine/aged MPs in Ca²⁺ solutions was significantly weaker than that in Na⁺ solutions due to enhanced straining and electrostatic adsorption. HA promoted the mobility of pristine/aged MPs in unsaturated porous media under all IS Na⁺ (1, 10, and 25 mM) solutions and lower IS (1 mM) Ca²⁺ solutions, and the ability of HA to promote the transport of aged MPs was significantly stronger than that of pristine MPs due to the higher adsorption of HA on the surface of aged MPs. However, at higher IS (10 mM) Ca²⁺ solution conditions, the bridging effect of Ca²⁺ led to the formation of HA-MPs complexes, which altered the hydrophobicity of the pristine/aged MPs surface and the pristine/aged MPs were mainly retained on the air-water interface (AWI). CFT theory and two-site kinetic retention models indicated that the retention of pristine/aged MPs in unsaturated media was dominated by monolayer adsorption, straining and clogging effects. The current research findings may provide insights into the fate and transport of aged MPs in soil and their potential risk of groundwater contamination.

Insight into the microplastics release from disposable face mask: Simulated environment and removal strategy

The fight against the COVID-19 epidemic significantly raises the global demand for personal protective equipment, especially disposable face masks (DFMs). The discarded DFMs may become a potential source of microplastics (MPs), which has attracted much attention. In this work, we identified the detailed source of MPs released from DFMs with laser direct infrared spectroscopy. Polypropylene (PP) and polyurethane (PU) accounted for 24.5% and 57.1% of released MPs, respectively. The melt-blown fabric was a dominant MPs source, however, previous studies underestimated the contribution of mask rope. The captured polyethylene terephthalate (PET), polyamide (PA), polyethylene (PE), and polystyrene (PS) in airborne only shared 18.4% of released MPs. To deepen the understanding of MPs release from medical mask into the aquatic environment, we investigated the effects of environmental factors on MPs release. Based on regression analysis, the effects of temperature, incubation time, and wearing time significantly affect the release of MPs. Besides, acidity, alkalinity, sodium chloride, and humic acid also contributed to the MPs release through corroding, swelling, or repulsion of fibers. Based on the exposure of medical mask to simulated environments, the number of released MPs followed the order: seawater > simulated gut-fluid > freshwater > pure water. Considering the risk of MPs released from DFMs to the environment, we innovatively established a novel flotation removal system combined with cocoamidopropyl betaine, achieving 86% removal efficiency of MPs in water. This work shed the light on the MPs release from DFMs and proposed a removal strategy for the control of MPs pollution.

Effects of ionic strength and particle size on transport of microplastic and humic acid in porous media

As an emerging pollutant, the transport behavior of colloidal microplastic particles (CMPs) in saturated porous media may be affected by the simultaneous presence of other substances in the natural environment. In this study, colloidal polystyrene microplastic particles (PSMPs) were selected as the representative of CMPs to investigate the cotransport behaviors of CMPs in the presence of humic acid (HA) under varied environmental conditions (ionic strength: 1, 100 mM KCl; HA concentration: 0, 5, 10, 20 mg⋅L^-1) in porous media. The presence of HA with different concentrations was found to increase the mobility of 1.0-μm and 0.2-μm CMPs in porous media in a non-linear and non-monotonic manner. Furthermore, the HA-facilitated transport of CMPs occurred under both electrostatically unfavorable and favorable attachment conditions (limited to the conditions examined in this study, corresponding to 1 and 100 mM KCl, respectively). The transport behavior of the smaller-sized CMPs (0.2-μm CMPs) was more sensitive to the change of ionic strength and the presence of HA than that of the larger-sized CMPs (1.0-μm CMPs). The cotransport process of CMPs and HA was affected by many factors. Modeling results showed that a small amount of competitive blocking occurred during the cotransport process. Moreover, both the presence of HA and change in ionic strength could affect the surface properties of CMPs. Thus, the cotransport behavior of CMPs with HA was different from the transport of individual CMPs in porous media. Experimental results revealed that HA induced complexity in the transport behavior of CMPs in the aqueous environment. Therefore, undeniably, a lot more systematic explorations are further demanded to better comprehend the CMPs cotransport mechanism in the presence of other substances.

Transport of microplastics in stormwater treatment systems under freeze-thaw cycles: Critical role of plastic density

Stormwater treatment systems remove and accumulate microplastics from surface runoff, but some of them can be moved downward to groundwater by natural freeze-thaw cycles. Yet, it is unclear whether or how microplastic properties such as density could affect the extent to which freeze-thaw cycles would move microplastics in the subsurface. To examine the transport and redistribution of microplastics in the subsurface by freeze-thaw cycles, three types of microplastics, with density smaller than (polypropylene or PP), similar to (polystyrene or PS), or greater than (polyethylene terephthalate or PET) water, were first deposited on the top of packed sand-the most common filter media used in infiltration-based stormwater treatment systems. Then the columns were subjected to either 23 h of drying at 22 ⁰C (control) or freeze-thaw treatment (freezing at -20 ⁰C for 6 h and thawing at 22 ⁰C for 17 h) followed by a wetting event. The cycle was repeated 36 times, and the effluents were analyzed for microplastics. Microplastics were observed in effluents from the columns that were contaminated with PET and subjected to freeze-thaw cycles. Comparison of the distribution of microplastics in sand columns at the end of 36 cycles confirmed that freeze-thaw cycles could disproportionally accelerate the downward mobility of denser microplastics. Using a force balance model, we show that smaller microplastics (<50 µm) can be pushed at higher velocity by the ice-water interface, irrespective of the density of microplastics. However, plastic density becomes critical when the size of microplastics is larger than 50 µm. The coupled experimental studies and theoretical framework improved the understanding of why denser microplastics such as PET and PVC may move deeper into the subsurface in the stormwater treatment systems and consequently elevate groundwater pollution risk.

Coronas of micro/nano plastics: a key determinant in their risk assessments

As an emerging pollutant in the life cycle of plastic products, micro/nanoplastics (M/NPs) are increasingly being released into the natural environment. Substantial concerns have been raised regarding the environmental and health impacts of M/NPs. Although diverse M/NPs have been detected in natural environment, most of them display two similar features, i.e.,high surface area and strong binding affinity, which enable extensive interactions between M/NPs and surrounding substances. This results in the formation of coronas, including eco-coronas and bio-coronas, on the plastic surface in different media. In real exposure scenarios, corona formation on M/NPs is inevitable and often displays variable and complex structures. The surface coronas have been found to impact the transportation, uptake, distribution, biotransformation and toxicity of particulates. Different from conventional toxins, packages on M/NPs rather than bare particles are more dangerous. We, therefore, recommend seriously consideration of the role of surface coronas in safety assessments. This review summarizes recent progress on the eco-coronas and bio-coronas of M/NPs, and further discusses the analytical methods to interpret corona structures, highlights the impacts of the corona on toxicity and provides future perspectives.