In situ scrutinize the adsorption of sulfamethoxazole in water using AFM force spectroscopy: Molecular adhesion force determination and fractionation

Cu(II) inhibited the transport of tetracycline in porous media: role of complexation

Tetracycline (TC) and Cu(II) coexist commonly in various waters, which may infiltrate into the subterranean environment through runoff and leaching, resulting in substantial ecological risks. However, the underlying mechanisms why Cu(II) affects the transport of TC in porous media remain to be further explored and supported by more evidence, especially the role of complexation. In this study, the transport of TC with coexisting Cu(II) was comprehensively explored with column experiments and density functional theory (DFT) calculation. At natural environmental concentrations, Cu(II) significantly inhibited the transport of TC in the quartz sand column. Cu(II) augmented the retention of TC in the column mainly via electrostatic force and complexation. The interaction between TC and TC-Cu complexes on the surface of SiO2 was investigated with first-principles calculations for the first time. There were strong van der Waals forces and coordination bonds on the surface of complexes and SiO2, leading to higher adsorption energy than that of TC and inhibiting its penetration. This study offers novel insights and theoretical framework for the transport of antibiotics in the presence of metal ions to better understand the fate of antibiotics in nature.

Employing Atomic Force Microscopy (AFM) for Microscale Investigation of Interfaces and Interactions in Membrane Fouling Processes: New Perspectives and Prospects

Membrane fouling presents a significant challenge in the treatment of wastewater. Several detection methods have been used to interpret membrane fouling processes. Compared with other analysis and detection methods, atomic force microscopy (AFM) is widely used because of its advantages in liquid-phase in situ 3D imaging, ability to measure interactive forces, and mild testing conditions. Although AFM has been widely used in the study of membrane fouling, the current literature has not fully explored its potential. This review aims to uncover and provide a new perspective on the application of AFM technology in future studies on membrane fouling. Initially, a rigorous review was conducted on the morphology, roughness, and interaction forces of AFM in situ characterization of membranes and foulants. Then, the application of AFM in the process of changing membrane fouling factors was reviewed based on its in situ measurement capability, and it was found that changes in ionic conditions, pH, voltage, and even time can cause changes in membrane fouling morphology and forces. Existing membrane fouling models are then discussed, and the role of AFM in predicting and testing these models is presented. Finally, the potential of the improved AFM techniques to be applied in the field of membrane fouling has been underestimated. In this paper, we have fully elucidated the potentials of the improved AFM techniques to be applied in the process of membrane fouling, and we have presented the current challenges and the directions for the future development in an attempt to provide new insights into this field.

Simulations of Subnanometer Scale Image Contrast in Atomic Force Microscopy of Self-Assembled Monolayers in Water

Achieving high-resolution images using dynamic atomic force microscopy (AFM) requires understanding how chemical and structural features of the surface affect image contrast. This understanding is particularly challenging when imaging samples in water. An initial step is to determine how well-characterized surface features interact with the AFM tip in wet environments. Here, we use molecular dynamics simulations of a model AFM tip apex oscillating in water above self-assembled monolayers (SAMs) with different chain lengths and functional groups. The amplitude response of the tip is characterized across a range of vertical distances and amplitude set points. Then relative image contrast is quantified as the difference of the amplitude response of the tip when it is positioned directly above a SAM functional group vs positioned between two functional groups. Differences in contrast between SAMs with different lengths and functional groups are explained in terms of the vertical deflection of the SAMs due to interactions with the tip and water during dynamic imaging. The knowledge gained from simulations of these simple model systems may ultimately be used to guide selection of imaging parameters for more complex surfaces.

Influence of microplastics on the transport of antibiotics in sand filtration investigated by AFM force spectroscopy

Microplastics and antibiotics were frequently detected in the effluent of sand filtration, while the presence of microplastics may change the interactions between the antibiotics and the quartz sands. However, the influence of microplastics on the transport of antibiotics in sand filtration has not been revealed. In this study, ciprofloxacin (CIP) and sulfamethoxazole (SMX) were respectively grafted on AFM probes to determine the adhesion forces to the representative microplastics (PS and PE) and the quartz sand. CIP and SMX exhibited low and high mobilities in the quartz sands, respectively. Compositional analysis of the adhesion forces indicated that the lower mobility of CIP in sand filtration columns could be attributed to the electrostatic attraction between the quartz sand and CIP compared with repulsion for SMX. Moreover, the significant hydrophobic interaction between the microplastics and the antibiotics could be responsible for the competitive adsorption of the antibiotics to the microplastics from the quartz sands; meanwhile, the π-π interaction further enhanced the adsorption of PS to the antibiotics. As a result of the high mobility of microplastics in the quartz sands, the carrying effect of microplastics enhanced the transport of antibiotics in the sand filtration columns regardless of their original mobilities. This study provided insights into the mechanism of the microplastics on enhancing the transport of antibiotics in sand filtration systems from the perspective of the molecular interaction.

Synergistic removal of sulfamethoxazole and dimethyl phthalate by five constructed wetland substrates

Frequent detection and joint toxicity of sulfonamides (SAs) and phthalate acid esters (PAEs) in water environment have caused serious health and safety problems that can be reduced by vertical flow constructed wetland (VFCW). However, it remains unclear what kind of substrate used in VFCW can synergistically remove SAs and PAEs. In this study, it was determined if biochar, zeolite, vermiculite, peat and sand synergistically removed sulfamethoxazole (SMX) and dimethyl phthalate (DMP) as representatives of SAs and PAEs by using batch and column experiments. The batch experiments showed that pseudo-second-order and intraparticle diffusion kinetics and Freundlich isotherm could better describe the synergistic adsorption of SMX and DMP on each substrate. SMX promoted hydrophobic interaction between DMP and each substrate so that low concentration DMP almost was adsorbed completely at neutral pH. Both neutral and alkaline pH conditions were favorable for synergistic adsorption of SMX and DMP on each substrate. The column experiments showed that removal of SMX or DMP in VFCW by substrate adsorption alone was limited with run time increasing, but SMX and DMP were effectively removed with run time increasing when loaded with simulated wastewater, SMX and DMP. The VFCW not only removed 94.7% SMX and 91.8% DMP after running 50 d, but also improved total nitrogen removal. In conclusion, these results strongly suggest that biochar, zeolite, vermiculite, peat and sand filled in VFCW can synergistically remove SMX and DMP.

Visualization the fixation of cadmium on manganese dioxide in sulfur reduction environments

Manganese oxides as common soil components were considered as an important sink for the cadmium pollution, which, however, would be affected by the reductive sulfide introduced during the flooding period of paddy soil. In this study, the phase transitions caused by the reactions among S^2-, MnO₂ and Cd²⁺ were visualized by atomic force microscopy (AFM). The dissolution of MnO₂ was in-situ studied by AFM in the S^2-containing environments. Moreover, in the ternary system (S^2-, MnO₂ and Cd²⁺), the pre-adsorption of Cd²⁺ by the MnO₂ nanosheets would promote the subsequent precipitation of CdS on the surface of MnO₂, while the pre-formed CdS nanoparticles in the aquatic phase would tend to suspense rather than precipitating on MnO₂. The kinetic study results indicated that the CdS crystallite generation rate was faster than the MnO₂ dissolution rate in the aquatic environments with different sulfide contents. In the macroscopic Cd²⁺ fixation test, the introduction of S^2- dramatically improved the fixation of the pre-adsorbed Cd²⁺ on the MnO₂ nanosheets by forming the CdS precipitate. This study provided a fundamental understanding of the interactions among the S^2-, MnO₂ and Cd²⁺ ternary system and shed light on the development of Cd pollution remediation methods for paddy soils.

Decipher the molecular descriptors and mechanisms controlling sulfonamide adsorption onto mesoporous carbon: Density functional theory calculation and partial least-squares path modeling

Mesoporous carbons (MCs) exhibit excellent removal efficiencies to various organic chemicals. However, how the properties of chemicals influence the adsorption mechanisms and further determine their adsorption onto MCs are poorly understood. We investigated the adsorption of 22 sulfonamides (SAs) onto four MCs, and further uncovered the major molecular descriptors and adsorption mechanisms influencing the adsorption by density functional theory (DFT) and partial least-squares path modeling (PLS-PM). The results revealed that the excess molar refraction (E), McGowan's molar volume (V), energy of the highest occupied molecular orbital (E_HOMO), hardness (H), and most positive net charge on carbon atom (Q_c⁺) were identified as the indirect factors affecting the distribution coefficient (logK_D), by influencing the BE(π-π), BE(H), and logK_ow. BE(π-π) and logK_ow displayed significant direct impacts on logK_D (p < 0.05), while BE(H) showed insignificant direct influences on logK_D (p > 0.05). The PLS-PM results indicate the main driving forces for SAs adsorption including π-π interactions, hydrophobic effects, and hydrogen bonding. This study provides a new perspective on revealing the adsorption mechanisms, and the identified factors can be used to develop the quantitative model to further predict the adsorption of SAs onto MCs.