Iron-modified biochar-based bilayer permeable reactive barrier for Cr(VI) removal

Antimony and arsenic migration in a heterogeneous subsurface at an abandoned antimony smelter under rainfall

While antimony (Sb) and arsenic (As) co-contamination in subsurface soil systems due to the legacy of Sb smelting wastes has been documented, the role of inherent heterogeneity on pollutant migration is largely overlooked. Herein this study investigated Sb and As migration in a slag impacted, vertically stratified subsurface at an abandoned Sb smelter. A 2-dimensional flume was assembled as a lab-scale analogue of the site and subject to rainfall and stop-rain events. Reactive transport modeling was then performed by matching the experimental observations to verify the key factors and processes controlling pollutant migration. Results showed that rainfall caused Sb and As release from the shallow slag layer and promoted their downward movement. Nevertheless, the less permeable deeper layers limited physical flow and transport, which led to Sb and As accumulation at the interface. The re-adsorption of Sb and As onto iron oxides in the deeper, more acidic layers further retarded their migration. Because of the large difference between Sb and As concentrations, Sb re-adsorption was much less effective, which led to higher mobility. Our findings overall highlight the necessity of understanding the degree and impacts of physicochemical heterogeneity for risk exposure assessment and remediation of abandoned Sb smelting sites.

A framework for estimating soil water characteristic curve and hydraulic conductivity function of permeable reactive media

The unsaturated behavior of permeable reactive barriers (PRB) is a critical component in predicting the removal efficiency through the adsorption of contaminants. This study investigates the framework to estimate the soil water characteristic curve (SWCC) and hydraulic conductivity function (HCF) for iron oxide-coated sand (IOCS) and zeolite, which are common materials used in PRBs. A multistep outflow (MSO) experiment was performed and the results of the MSO experiment were used to optimize associated parameters in Kosugi's SWCC and HCF. In addition, three scenarios of optimization analysis were investigated to evaluate the best-fitting model for estimating SWCC and HCF. The low root mean square error (RMSE) of fitted parameters indicates the Kosugi model well described the observed suction profiles in MSO experiments. In addition, the lowest RMSE and coefficient of variation suggested the inclusion of the additional parameter β provided the best estimation of the three materials (clean sand, IOCS, and zeolite). The physically reasonable estimation of SWCC and HCF of the three materials from the optimized parameters suggests the proposed framework is a reasonable model for the unsaturated behavior of PRBs.

Enhanced Cr(VI) stabilization by terrestrial-derived soil protein: Photoelectrochemical properties and reduction mechanisms

Glomalin-related soil protein (GRSP) is a stable iron-organic carbon mixture that can enhance heavy metal sequestration in soils. However, the roles of GRSP in the transformation and fate of Cr(VI) have been rarely reported. Herein, we investigated the electrochemical and photocatalytic properties of GRSP and its mechanisms in Cr(VI) adsorption and reduction. Results showed that GRSP had a stronger ability for Cr(VI) adsorption and reduction than other biomaterials, with the highest adsorption amount of up to 0.126 mmol/g. The removal efficiency of Cr(VI) by GRSP was enhanced (4-7%) by ultraviolet irradiation due to the hydrated electrons produced by GRSP. Fe(II) ions, persistent free radicals, and oxygen-containing functional groups on the GRSP surface as electron donors participated in the reduction of Cr(VI) under dark condition. Moreover, Cr(III) was mainly adsorbed on the -COOH groups of GRSP via electrostatic interactions. Based on 2D correlation spectroscopy, the preferential adsorption occurred on the GRSP surface for Cr(VI) in the sequential order of CO → COO- → O-H → C-O. This work provides new insights into the Cr(VI) adsorption and reduction mechanism by GRSP. Overall, GRSP can serve as a natural iron-organic carbon for the photo-reduction of Cr(VI) pollution in environments.

Applications and synergistic degradation mechanisms of nZVI-modified biochar for the remediation of organic polluted soil and water: A review

Increasing organic pollution in soil and water has garnered considerable attention in recent years. Nano zero-valent iron-modified biochar (nZVI/BC) has been proven to remediate the contaminated environment effectively due to its abundant active sites and unique reducing properties. This paper provides a comprehensive overview of the application of nZVI/BC in organic polluted environmental remediation and its mechanisms. Firstly, the review introduced primary synthetic methods of nZVI/BC, including in-situ synthesis (carbothermal reduction and green synthesis) and post-modification (liquid-phase reduction and ball milling). Secondly, the application effects of nZVI/BC were discussed in remediating soil and water polluted by antibiotics, pesticides, polycyclic aromatic hydrocarbons (PAHs), and dyes. Thirdly, this review explored the mechanisms of the adsorption and chemical degradation of nZVI/BC, and synergistic degradation mechanisms of nZVI/BC-AOPs and nZVI/BC-Microbial interactions. Fourth, the factors that influence the removal of organic pollutants using nZVI/BC were summarized, encompassing synthesis conditions (raw materials, pyrolysis temperature and aging of nZVI/BC) and external factors (reagent dosage, pH, and coexisting substances). Finally, this review proposed future challenges for the application of nZVI/BC in environmental remediation. This review offers valuable insights for advancing technology in the degradation of organic pollutants using nZVI/BC and promoting its on-site application.

Efficient adsorption of Cu2+ and Cd2+ from groundwater by MgO-modified sludge biochar in single and binary systems

In this study, MgO-modified sludge biochar (1MBC) prepared from sewage sludge was successfully used as an efficient adsorbent to remove heavy metals from groundwater. The adsorption performance and mechanism of 1MBC on Cu2+ and Cd2+ were investigated in single and binary systems, and the contribution of different mechanisms was quantified. Adsorption kinetics and isotherms analysis revealed that the adsorption processes of Cu2+ and Cd2+ by 1MBC followed the pseudo-second-order kinetic and Langmuir isotherm model in both systems, indicating that Cu2+ and Cd2+ were mainly controlled by chemisorption, and their theoretical maximum adsorption capacities were 240.36 and 219.06 mg·g-1, respectively. The results of the binary system showed that due to the competitive adsorption, the adsorption capacity of 1MBC for both heavy metals was lower than that of the single system, and the selective adsorption of Cu2+ was higher. The influencing variable experiments revealed that the adsorption of Cu2+ and Cd2+ by 1MBC had a wide pH adaption range and strong anti-interference ability to coexisting organics and ions. The adsorption mechanisms involved ion exchange (Cu: 47.39%, Cd: 53.17%), mineral precipitation (Cu: 35.31%, Cd: 24.18%), functional group complexation (Cu: 10.44%, Cd: 14.53%), and other possible mechanisms (Cu: 6.87%, Cd: 8.12%). Furthermore, 1MBC demonstrated excellent regeneration potential after five cycle times. Overall, the results have significant reference value for the practical application of removing heavy metals.

Insights into the selectivity of metallic oxides for arsenic and phosphate from EXAFS and DFT calculations

Phosphate is the biggest competitor for arsenic removal. Nanoscale metal oxides (NMOs) are commonly used to treat arsenic-contaminated water, yet their selective adsorption mechanisms for arsenic and phosphate are poorly understood. We quantified the selectivity of iron oxide (Fe2O3), zinc oxide (ZnO), and titanium dioxide (TiO2) nanosheets for arsenic in systems containing arsenic and phosphate, and determined the interaction of phosphate and arsenate/arsenite on metal oxide surfaces through batch experiments, spectroscopic techniques, and DFT calculations. We found that Fe2O3, TiO2, and ZnO nanosheets exhibit selectivity for arsenate/arsenite in the presence of phosphate, with Fe2O3 the most selective, followed by TiO2 and ZnO. The bonding mechanism on these metallic oxide surfaces dominates the selectivity. The more stable inner-sphere complexes of arsenate on the surfaces of Fe2O3 (bidentate binuclear), TiO2 (bidentate binuclear), and ZnO nanosheets (tridentate trinuclear) contribute to their preference for arsenate over phosphate. This difference in arsenate selectivity can be reflected in the difference in adsorption energy, net electron transfer number, and M - O bond length of the most stable inner sphere complexes. Overall, our study elucidated the selective adsorption mechanisms of arsenate/arsenite on Fe2O3, TiO2, and ZnO surfaces and highlighted the need to consider the competition between arsenate and phosphate during their removal from contaminated water.

Atomic-Level Structural Differences between Fe(III) Coprecipitates Generated by the Addition of Fe(III) Coagulants and by the Oxidation of Fe(II) Coagulants Determine Their Coagulation Behavior in Phosphate and DOM Removal

In situ Fe(III) coprecipitation from Fe2+ oxidation is a widespread phenomenon in natural environments and water treatment processes. Studies have shown the superiority of in situ Fe(III) (formed by in situ oxidation of a Fe(II) coagulant) over ex situ Fe(III) (using a Fe(III) coagulant directly) in coagulation, but the reasons remain unclear due to the uncertain nature of amorphous structures. Here, we utilized an in situ Fe(III) coagulation process, oxidizing the Fe(II) coagulant by potassium permanganate (KMnO4), to treat phosphate-containing surface water and analyzed differences between in situ and ex situ Fe(III) coagulation in phosphate removal, dissolved organic matter (DOM) removal, and floc growth. Compared to ex situ Fe(III), flocs formed by the natural oxidizing Fe2+ coagulant exhibited more effective phosphate removal. Furthermore, in situ Fe(III) formed through accelerated oxidation by KMnO4 demonstrated improved flocculation behavior and enhanced removal of specific types of DOM by forming a more stable structure while still maintaining effective phosphate removal. Fe K-edge extended X-ray absorption fine structure spectra (EXAFS) of the flocs explained their differences. A short-range ordered strengite-like structure (corner-linked PO4 tetrahedra to FeO6 octahedra) was the key to more effective phosphorus removal of in situ Fe(III) than ex situ Fe(III) and was well preserved when KMnO4 accelerated in situ Fe(III) formation. Conversely, KMnO4 significantly inhibited the edge and corner coordination between FeO6 octahedra and altered the floc-chain-forming behavior by accelerating hydrolysis, resulting in a more dispersed monomeric structure than ex situ Fe(III). This research provides an explanation for the superiority of in situ Fe(III) in phosphorus removal and highlights the importance of atomic-level structural differences between ex situ and in situ Fe(III) coprecipitates in water treatment.

Antimony Isotope Fractionation Revealed from EXAFS during Adsorption on Fe (Oxyhydr)oxides

A lack of knowledge about antimony (Sb) isotope fractionation mechanisms in key geochemical processes has limited its environmental applications as a tracer. Naturally widespread iron (Fe) (oxyhydr)oxides play a key role in Sb migration due to strong adsorption, but the behavior and mechanisms of Sb isotopic fractionation on Fe (oxyhydr)oxides are still unclear. Here, we investigate the adsorption mechanisms of Sb on ferrihydrite (Fh), goethite (Goe), and hematite (Hem) using extended X-ray absorption fine structure (EXAFS) and show that inner-sphere complexation of Sb species with Fe (oxyhydr)oxides occurs independent of pH and surface coverage. Lighter Sb isotopes are preferentially enriched on Fe (oxyhydr)oxides due to isotopic equilibrium fractionation, with neither surface coverage nor pH influencing the degree of fractionation (Δ¹²³Sb_{aqueous-adsorbed}). Limited Fe atoms are present in the second shell of Hem and Goe, resulting in weaker surface complexes and leading to greater Sb isotopic fractionation than with Fh (Δ¹²³Sb_{aqueous-adsorbed} of 0.49 ± 0.004, 1.12 ± 0.006, and 1.14 ± 0.05‰ for Fh, Hem, and Goe, respectively). These results improve the understanding of the mechanism of Sb adsorption by Fe (oxyhydr)oxides and further clarify the Sb isotope fractionation mechanism, providing an essential basis for future application of Sb isotopes in source and process tracing.

Fe-biochar for simultaneous stabilization of chromium and arsenic in soil: Rational design and long-term performance

Excess chromium (Cr) and arsenic (As) coexist in soil such as chromated copper arsenate (CCA) contaminated sites, leading to high risks of pollution. Fe-biochar with adjustable redox activity offers the possibility of simultaneous stabilization of Cr and As. Here, a series of Fe-biochar with distinct Fe/C structure were rationally produced for the remediation of Cr and As contaminated soil (BCX-Fe, X represented the biomass/Fe ratio). Adsorption tests showed that maximal adsorption of BC5-Fe for Cr(VI) and As(III) reached 73.7 and 81.3 mg/g. A 90-day soil remediation experiment indicated that the introduction of 3% (w/w) Fe-biochar reduced the leaching state of Cr(VI) by 93.8-99.7% and As by 75.2-95.6%. Under simulated groundwater erosion for 10 years and acid rain leaching for 7.5 years, the release levels of Cr(VI) and As in the BC5-Fe remediated soil could meet the groundwater class IV standard in China (Cr(VI)<0.1 mg/L, As<0.05 mg/L). Accelerated aging tests demonstrated that BC5-Fe had long-term Cr and As stabilization ability. The quenching experiment, EPR, and XPS suggested that the corrosion products of Fe dominated the adsorption and redox reactions, while the O groups acted as electron transfer stations and constituted redox microcirculation in the synchronous uptake of Cr/As. Based on these insights, we believe that our study will provide meaningful information about the application potential of Fe-biochar for the heavy metal contaminated soil remediation.

Removal of Chromium Species by Adsorption: Fundamental Principles, Newly Developed Adsorbents and Future Perspectives

Emerging chromium (Cr) species have attracted increasing concern. A majority of Cr species, especially hexavalent chromium (Cr(VI)), could lead to lethal effects on human beings, animals, and aquatic lives even at low concentrations. One of the conventional water-treatment methodologies, adsorption, could remove these toxic Cr species efficiently. Additionally, adsorption possesses many advantages, such as being cost-saving, easy to implement, highly efficient and facile to design. Previous research has shown that the application of different adsorbents, such as carbon nanotubes (carbon nanotubes (CNTs) and graphene oxide (GO) and its derivatives), activated carbons (ACs), biochars (BCs), metal-based composites, polymers and others, is being used for Cr species removal from contaminated water and wastewater. The research progress and application of adsorption for Cr removal in recent years are reviewed, the mechanisms of adsorption are also discussed and the development trend of Cr treatment by adsorption is proposed.