Tracking nanoplastics in freshwater microcosms and their impacts to aquatic organisms

A comparative study on the stability and coagulation removal of aged vs. nonaged nanoplastics in surface water

Nanoplastics (NPs) are released into surface water due to the widespread use of plastics, undergoing aging from environmental and human factors that alter their physical and chemical characteristics. However, detecting NPs remains challenging, resulting in limited research on their behavior in surface water and their removal efficiency by drinking water treatment. This study utilizes palladium-doped polystyrene nanoplastics (PSNPs) as tracers to enable precise detection and quantification through ICP-MS, thereby overcoming the limitations of conventional detection methods. PSNPs are aged using solar irradiation and ozone to simulate both natural and artificial aging processes, affecting the physical and chemical properties of NPs, which in turn influence their behavior in water treatment systems. Moreover, the study investigates the impact of various coagulation conditions, including different coagulants (AlCl3 and PACl), pH levels (4-9), and humic acid (HA) concentrations (0-10 mg/L), on the of both aged and nonaged NPs. The results demonstrate solar aging triggers significant morphological changes in PSNPs, while ozone aging induces more oxygen functional groups on PSNPs (CIozone=20.99; CIsolar=0.70), increasing sensitivity to HA concentrations and resulting in reduced removal efficiencies for ozone aged PSNPs by AlCl3 (68.68 %) and PACl (74.74 %). In addition, PACl achieves higher PSNPs removal efficiencies (REmin=88.59 %) than that of AlCl3 (REmin=85.57 %) under varied pH levels. This research fills a gap in understanding aged NPs behavior in surface water and offers practical solutions for optimizing coagulation for NPs removal, enhancing our ability to predict NPs environmental fate and manage NPs pollution to ensure drinking water safety.

Use of 2H-labeled nanoplastics to study their accumulation and toxicity in Daphniamagna

Understanding the interactions between nanoplastics (NP) and biota is essential for risk assessment. However, NP quantification in complex matrices remains a challenge, especially when they are not labeled. Most labeling strategies consists in adding another compound (fluorophore, metal, lanthanide …) to the polymer, which can alter the NP properties and poses a risk of leaching phenomena. In the present study, we synthesized spherical and monodisperse 2H-labeling NP (129 nm) with carboxyl groups at their surface (8.7 nm-2) using surfactant-free polymerization. A pyrolysis coupled with gas chromatography/mass spectrometry method was developed to enable their quantification (limit of detection = 7.4 ng), without extensive sample preparation or significant matrix effects. The 2H-labeled NP were then used to study their toxicity and accumulation in the planktonic crustaceans Daphnia magna (D. magna). Daphnids were exposed for 48 h to the deuterated NP at different concentrations, including environmentally realistic ones (from 0.03 to 36 mg kg-1). Little to no acute toxicity were observed in this range of concentration. During the experiment, adsorption on polycarbonate well walls was observed, suggesting that the NP concentration during exposure experiments with organisms should be monitored to take into account possible loss. The NP accumulation (mainly in the digestive tract) increased with the exposure concentration, tending to a plateau at higher concentrations. The depuration was also investigated and was significantly higher (97 % against 59 % in average) when the daphnids have access to algae, which highlight the need to add food in D. magna depuration studies to study the NP fate in these organisms. The present study demonstrated the advantages of stable isotope-labeled NP to better understand the processes controlling NP accumulation and impacts on aquatic biota.

Predator traits influence uptake and trophic transfer of nanoplastics in aquatic systems-a mechanistic study

Predicting the response of aquatic species to environmental contaminants is challenging, in part because of the diverse biological traits within communities that influence their uptake and transfer of contaminants. Nanoplastics are a contaminant of growing concern, and previous research has documented their uptake and transfer in aquatic food webs. Employing an established method of nanoplastic tracking using metal-doped plastics, we studied the influence of biological traits on the uptake of nanoplastic from water and diet in freshwater predators through two exposure assays. We focused on backswimmers (Anisops wakefieldi) and damselfly larvae (Xanthocnemis zealandica) - two freshwater macroinvertebrates with contrasting physiological and morphological traits related to feeding and respiration strategies. Our findings reveal striking differences in nanoplastic transfer dynamics: damselfly larvae accumulated nanoplastics from water and diet and then efficiently eliminated 92% of nanoplastic after five days of depuration. In contrast, backswimmers did not accumulate nanoplastic from either source. Differences in nanoplastic transfer dynamics may be explained by the contrasting physiological and morphological traits of these organisms. Overall, our results highlight the importance and potential of considering biological traits in predicting transfer of nanoplastics through aquatic food webs.

Supplementary Information

The online version contains supplementary material available at 10.1186/s43591-024-00096-4.

Molecular-level insight into the behavior of metal cations and organic matter during the aggregation of polystyrene nanoplastics

In this study, the behavior of metal cations and organic matter during polystyrene nanoplastics (PSNP) aggregation was explored combing experimental measurements and molecular dynamics simulation. The results indicated that coexisting organic matter, including organic pollutants and humic acid (HA), play a complex role in determining PSNP aggregation. The representative organic pollutant, bisphenol A, exhibited competitive behavior with HA during heteroaggregation, and the heteroaggregation between HA and PSNP was impaired by bisphenol A. The bridging effect of metal ions in aggregation is related to their interaction strength with functional groups, binding affinity with water molecules, and concentration. In particular, Mg2+ interacts more strongly with oxygen-containing functional groups on PSNP than Ca2+. However, Mg2+ is more favorable for binding with water and is therefore not as effective as Ca2+ for destabilizing PSNP. Compared with Ca2+ and Mg2+, Na+ showed a weaker association with PSNP; however, it still showed a significant effect in determining the aggregation behavior of PSNP owing to its high concentration in seawater. Overall, we provided a molecular-level understanding of PSNP aggregation and deepened our understanding of the fate of nanoplastics.

Polystyrene nanoplastics synergistically exacerbate diclofenac toxicity in embryonic development and the health of adult zebrafish

In this study, we investigated the possible ecotoxicological effect of co-exposure to polystyrene nanoplastics (PS-NPs) and diclofenac (DCF) in zebrafish (Danio rerio). After six days of exposure, we noticed that the co-exposure to PS-NP (100 μg/L) and DCF (at 50 and 500 μg/L) decreased the hatching rate and increased the mortality rate compared to the control group. Furthermore, we noted that larvae exposed to combined pollutants showed a higher frequency of morphological abnormalities and increased oxidative stress, apoptosis, and lipid peroxidation. In adults, superoxide dismutase and catalase activities were also impaired in the intestine, and the co-exposure groups showed more histopathological alterations. Furthermore, the TNF-α, COX-2, and IL-1β expressions were significantly upregulated in the adult zebrafish co-exposed to pollutants. Based on these findings, the co-exposure to PS-NPs and DCF has shown an adverse effect on the intestinal region, supporting the notion that PS-NPs synergistically exacerbate DCF toxicity in zebrafish.

Labelling of micro- and nanoplastics for environmental studies: state-of-the-art and future challenges

Studying microplastics and nanoplastics (MNP) in environmental matrices is extremely challenging, and recent developments in labelling techniques may hold much promise to further our knowledge in this field. Here, we reviewed MNP labelling techniques and applications to provide the first systematic and in-depth insight into MNP labelling. We classified all labelling techniques for MNP into four main types (fluorescent, metal, stable isotope and radioisotope) and discussed per type the synthesis methods, detection methods, influencing factors, and the current and future applications and challenges. Direct labelling of environmental MNP with fluorescent dyes and metals enables simple visualisation and selective detection of MNP to improve detection efficiency. However, it is still an open question how to avoid co-labelling of non-plastic (i.e. non-target, matrix) materials. Labelling of MNP that are intentionally added in the environment may allow semi-automatic detection of MNP particles with high accuracy and sensitivity during studies on e.g. transport and degradation. The detection limit of labelled MNP largely depends on particle size and the type of matrix. Fluorescent labelling allows efficient detection of microplastics, whereas metal labelling is preferred for nanoplastics research due to a potentially higher sensitivity. A major challenge for fluorescent and metal labelling is to develop techniques that do not alter the inherent MNP properties or only do so minimally, in particular the surface properties. Stable and radioactive isotope labelling (13C and 14C, but also 15N, 2H) of the polymer itself allows to preserve inherent MNP properties, but have been largely ignored. Overall, labelling of MNP holds great promise for advancing our fundamental understanding of the behaviour of plastics, notably the smallest fractions, in the environment.

DNA damage and molecular level effects induced by polystyrene (PS) nanoplastics (NPs) after Chironomus riparius (Diptera) larvae

In this work, we analyzed the early molecular effects of polystyrene (PS) nanoplastics (NPs) on an aquatic primary consumer (larvae of Chironomus riparius, Diptera) to evaluate their potential DNA damage and the transcriptional response of different genes related to cellular and oxidative stress, endocrine response, developmental, oxygen transport, and immune response. After 24-h exposures of larvae to doses of PS NPs close to those currently found in the environment, the results revealed a large genotoxic effect. This end was evidenced after significant increases in DNA strand breaks of C. riparius larvae quantified by the comet assay, together with results obtained when analyzing the expression of four genes involved in DNA repair (xrrc1, ATM, DECAY and NLK) and which were reduced in the presence of these nanomaterials. Consequently, this reduction trend is likely to prevent the repair of DNA damage caused by PS NPs. In addition, the same tendency to reduce the expression of genes involved in cellular stress, oxidative stress, ecdysone pathway, development, and oxygen transport was observed. Taken together, these results suggest that PS NPs reduce the expression of hormonal target genes and a developmental gene. We show, for the first time, effects of PS NPs on the endocrine system of C. riparius and suggest a possible mechanism of blocking ecdysteroid hormones in insects. Moreover, the NPs were able to inhibit the expression of hemoglobin (Hb C), a protein involved in oxygen transport, and activate a gene of the humoral immune system. These data reveal for the first time the genomic effects of PS NPs in the aquatic invertebrate C. riparius, at the base of the food chain.

The threat of micro/nanoplastic to aquatic plants: current knowledge, gaps, and future perspectives

Plastics have been recognized as an emerging pollutant and have raised global concerns due to their widespread distribution in the environment and potential harm to living systems. However, research on the threat of micro/nanoplastics (MPs/NPs) to the unique group of aquatic plants is far behind, necessitating a comprehensive review to summarize current research progress and identify future research needs. This review explores the sources and distribution patterns of MPs/NPs in aquatic environments, highlighting their uptake by aquatic plants through roots and leaves, and subsequent translocation via the vascular system facilitated by the transpiration stream. Exposure to MPs/NPs elicits diverse effects on the growth, physiology, and ecological interactions of aquatic plants, with variations influenced by plastic properties, plant species, and experimental conditions. Furthermore, the presence of MPs/NPs can impact the toxicity and bioavailability of other associated toxicants to aquatic plants. This review shows critical knowledge gaps and emphasizes the need for future research to bridge the current understanding of the limitations and challenges posed by MPs/NPs in aquatic ecosystems.

Risk assessment framework for microplastic in marine environments

Constantly raising microplastic (MP) contamination of water sources poses a direct threat to the gentle balance of the marine environment. This study focuses on a multifactor hazard evaluation of conventional (polyethylene - PE, polypropylene - PP, and polystyrene - PS) and alternative (polyethylene terephthalate with 25 % or 50 % recycled material and polylactic acid) plastics. The risk assessment framework explored included MP abundance, water acidification potential, surface oxidation, fragmentation, and bacterial growth inhibition. Based on MP monitoring campaigns worldwide, we conclude that PE-based plastics are the most abundant MPs in water samples (comprise up to 82 % the MP in those samples). A year-long weathering experiment showed that PS-based and PP-based plastics were oxidized to a higher extent, resulting in the highest water acidification with pH reduction of up to three orders of magnitude. Finally, our laboratory experiments showed that weathered PS was the most fragile plastic during mechanical degradation, while both PP- and PS-based plastic extracts showed a significant growth inhibition toward the marine microorganisms (Bacillus sp. and Pseudoaltermonas sp). Using the examined factors as weighted inputs into our framework, this holistic evaluation of hazards suggest that PP-based plastic products were the most hazardous compared to the other conventional and alternative plastic types.

A Sustainable Method for Removal of the Full Range of Liquid and Solid Hydrocarbons from Water Including Up- and Recycling

Beyond their CO2 emittance when burned as fuels, hydrocarbons (HCs) serve as omnipresent raw materials and commodities. No matter if as liquid oil spills or the endless amounts of plastic roaming the oceans, HCs behave as persistent pollutants with water as main carrier to distribute. Even if their general chemical structure [-(CH2 )n -] is quite simple, the endless range of n leads to contaminations of different appearances and properties. A water remediation method based on superparamagnetic iron oxide nanoparticles (SPIONs) modified with self-assembled monolayers of alkyl phosphonic acid derivatives is presented. These molecules enable the SPIONs to non-covalently bind HCs, independently from the molecular weight, size and morphology. The attractive interaction is mainly based on hydrophobic and Coulomb interaction, which allows recycling of the SPIONs. The superparamagnetic core allows a simple magnetic collection and separation from the water phase which makes it a promising addition to wastewater treatment. Agglomerates of collected plastic "waste" even exhibit superior adsorption properties for crude oil, another hydrocarbon waste which gives these collected wastes a second life. This upcycling approach combined with presented recycling methods enables a complete recycling loop.

Understanding the aggregation, consumption, distribution and accumulation of nanoparticles of polyvinyl chloride and polymethyl methacrylate in Ruditapes philippinarum

Plastic products have become an integral part of our life. A widespread usage, high stability, uncontrolled disposal and slow degradation of plastics in the environment led to the generation and accumulation of nanoparticles of polymers (NPs) in the marine environment. However, little is known about the aggregation, consumption and distribution of NPs from common polymers such as polyvinyl chloride (NP-PVC) and polymethyl methacrylate (NP-PMMA) inside marine animal physiologies. In the current study, two types of polymers (PVC and PMMA) × four exposure concentrations (1, 5, 15 and 25 mg/L) × four times (4, 8, 12 and 24 h) exposure studies were conducted to understand the consumption and distribution of luminescent NP-PVC (98.6 ± 17.6 nm) and NP-PMMA (111.9 ± 37.1 nm) in R. philippinarum. Under laboratory conditions, NP-PVC showed a higher aggregation rate than NP-PMMA in seawater within a period of 24 h. Aggregations of NPs increased with an increase in initial NP concentrations, leading to significant settling of nanoparticles within 24 h exposure. Such aggregation and settling of particles enhanced the consumption of NPs by benthic filter-feeding R. philippinarum at all exposure concentrations during 4 h exposure. More interestingly, NP-PVC and NP-PMMA were observed in large amounts in both liver and gills (22.6 % - 29.1 %) of the clams. Furthermore, NP-PVC was detected in most organs of R. philippinarum as compared to NP-PMMA. This study demonstrates that different polymers distribute and accumulate differently in the same biological model under laboratory exposure conditions based on their chemical nature.