A biomimetic beetle-like membrane with superoleophilic SiO2-induced oil coalescence on superhydrophilic CuC2O4 nanosheet arrays for effective O/W emulsion separation

Synthesis of an efficient demulsifier derived from cotton cellulose and its demulsification performance in oily wastewater

Substantial amounts of oily wastewater are inevitably generated during petroleum extraction and petrochemical production, and the effective treatment of these O/W emulsions is crucial for environmental protection and resource recovery. The development of an environmentally friendly, cost-effective, and efficient demulsifier that operates effectively at low concentrations remains a significant challenge. This study introduces an eco-friendly ionic liquid demulsifier, Cotton Cellulose-Dodecylamine (CCDA), which demonstrates exceptional demulsification performance at low concentrations. CCDA was synthesized from natural cotton, which underwent hydrophobic modification using dodecylamine. The chemical structure and surface morphology were characterized using FT-IR, 1H NMR, 13C NMR and SEM. The demulsification experiments demonstrated that CCDA achieved a light transmittance of 87.56 % and an oil removal rate of 99.78 % at 20 mg/L, along with exceptional salt tolerance. Besides, CCDA exhibited effective demulsification in O/W emulsions stabilized by anionic and nonionic surfactants. Furthermore, the possible demulsification mechanism of CCDA was elucidated through an analysis of interfacial adsorption kinetics and zeta potential measurements. The results indicate that CCDA promotes demulsification by replacing natural surfactants at the interface and facilitating electrostatic neutralization. Consequently, CCDA holds significant promise for the treatment of oily wastewater and provides a new idea for the application of biomass materials in demulsification.

Bioinspired interlaced wetting surfaces for continuous on-demand emulsion separation

Maintaining high separation performance during continuous emulsion separation remains a challenge. Herein, based on biomimetic coupling ideas, hole array interlaced wetting surfaces (HAIWSs) and mastoid array interlaced wetting surfaces (MAIWSs) were prepared by laser processing, electroless silver deposition, thiol modification, and spraying for on-demand emulsion separation. When the separation is going on, randomly moving emulsion droplets are prone to being captured by holes or mastoids due to interlaced wettability. Under this unique interface behavior, the occurrence of filter cake and pore clogging is reduced, thus achieving both high efficiency (∼99.5 and ∼99.3 %). Meanwhile, the high flux can also be maintained (∼3212 and ∼3458 L m-2 h-1). Significantly better than surfaces without pores or mastoid structures. Further, the as-prepared surfaces also exhibit excellent recyclability. After 50 separation cycles, optimized HAIWS and MAIWS still maintained high efficiency (∼96.2 and ∼95.8 %) and high flux (∼3042 and ∼3164 L m-2 h-1), exceeding other surfaces without hole or mastoid structure. Notably, complex physical/chemical cleaning processes are avoided. Besides, even in harsh conditions, HAIWS and MAIWS still maintain excellent stability. The above strategy provides a novel mechanism for effective on-demand emulsion separation and is expected to encourage the creation of new-class separation devices for oily wastewater treatment in industry.

A review of various dimensional superwetting materials for oil-water separation

In recent years, the application and fabrication technologies of superwetting materials in the field of oil-water separation have become a research hotspot, aiming to address challenges in marine oil spill response and oily wastewater treatment. Simultaneously, the fabrication technologies and related applications of superwetting materials have been increasingly diversified. This paper systematically reviews the sources and hazards of oily wastewater and oil-water emulsions, several traditional oil-water separation methods, and their limitations, thereby highlighting the advantages of superwetting materials. Additionally, this paper provides an overview of the fundamental theories of wetting and conducts a microanalysis of the penetration mechanism based on Laplace pressure at the gas-liquid-solid three-phase interface. Following this, the latest advances in superwetting oil-water separation materials are elucidated, focusing on five categories: (i) superhydrophobic-superoleophilic materials; (ii) superhydrophilic-underwater superoleophobic materials; (iii) superhydrophobic-superoleophobic materials; (iv) "special" superwetting materials; and (v) smart switchable superwetting materials. This paper innovatively discusses these materials from the perspectives of two-dimensional and three-dimensional materials, deeply studying the mechanisms of oil-water separation and using data to quantify the separation efficiency. Comparative discussions are conducted on the materials from various dimensions, including different substrates, innovations in existing technologies, and fabrication methods as discussed in various articles, followed by corresponding summaries. Finally, the existing shortcomings and challenges of current superwetting materials are summarized, and prospects are proposed. We firmly believe that developing low-cost, stable, environmentally friendly, and practical large-scale superwetting oil-water separation materials will have broad application prospects and potential in the future.

Efficient oil spill cleanup from water: Investigating the effectiveness of a sustainable anti-swelling hydrogel for rapid water repellency and oil absorption

Considering the significant harm caused to aquatic ecosystems and marine life by oil spills and the discharge of oily wastewater, there is a pressing need to address this issue to protect our environment and prevent the wastage of valuable resources. We introduced a two-step approach to create an anti-swelling, water-repellent sorbent using a green polysaccharide called gum gellan, functionalized with Octadecyl trichlorosilane (OTS) through dip coating method. Natural gums like gellan have high absorption capability due to their large surface area. However, they are hydrophilic, which means they can only absorb water. This property makes them unsuitable for oil spill applications. To make gum gellan suitable for oil spill applications, we have modified it in this study. We have introduced a material called octadecyltrichlorosilane, which has low surface energy and hierarchical roughness. This modification changes the wettability of gellan from hydrophilic to hydrophobic/oleophilic, allowing it to absorb oil and repel water. The sorbent is analyzed using several techniques, such as FTIR, XRD, TGA, FE-SEM, BET, Raman, EDX, and H1-NMR. The hydrophobic sorbent obtained demonstrates low density, high surface area, and high porosity. These characteristics give it excellent floatability and immediate and exceptional selectivity for absorbing oil from water. Additionally, it does not absorb any detectable amount of water. The sorbent exhibited a water contact angle (WCA) of 140 ± 3 ° and an oil contact angle (OCA) of 0° for various oils and organic solvents. It has rapid oil absorption capacity of 3.72 g/g for diesel, and can be easily recovered after use. The BET analysis revealed that after the modification with OTS, the sorbent's total surface area increased from 0.579 m2/g to 4.713 m2/g. This indicates that the OTS modification greatly enhances the surface area and pore volume of the, thus improving its ability to absorb oil. This sorbent efficiently separates oil-in-water emulsions, both surfactant-stabilized and surfactant-free, achieving over 90% separation through gravity alone. Moreover, the sorbent can sustain its wettability even under harsh environmental conditions, including exposure to acids, alkalis, and salts. The absorption data predominantly aligned with the pseudo-2nd-order model. Thus, this sorbent provides a cost-effective alternative for efficiently absorbing and separating oil-water emulsions in households and industries.

CTAB-induced synthesis of two-dimensional copper oxalate particles: using l-ascorbic acid as the source of oxalate ligand

Copper oxalate is typically synthesized through a precipitation reaction involving copper salts mixed with oxalic acid or oxalate solutions. However, in this study, we were successful in synthesizing well-formed square-like copper oxalate particles under liquid-phase conditions at ambient temperature and pressure using ascorbic acid as the source of the oxalic acid ligand. The addition of cationic surfactant cetyltrimethylammonium bromide (CTAB) caused the morphology of copper oxalate particles to undergo a transition from three-dimensional to two-dimensional. And the inhibition of the assembly of primary copper oxalate nanocrystals along the [001] direction became stronger with the increase of CTAB concentration. The impact of CTAB on the crystallization, growth, and self-assembly processes of primary copper oxalate nanocrystals was analysed using various testing methods. Based on these analyses, the possible mechanism of CTAB-induced synthesis of two-dimensional copper oxalate particles was finally proposed.

Molybdenum-Modified Titanium Dioxide Nanotube Arrays as an Efficient Electrode for the Electroreduction of Nitrate to Ammonia

Electrochemical nitrate reduction (NO3-RR) has been recognized as a promising strategy for sustainable ammonia (NH3) production due to its environmental friendliness and economical nature. However, the NO3-RR reaction involves an eight-electron coupled proton transfer process with many by-products and low Faraday efficiency. In this work, a molybdenum oxide (MoOx)-decorated titanium dioxide nanotube on Ti foil (Mo/TiO2) was prepared by means of an electrodeposition and calcination process. The structure of MoOx can be controlled by regulating the concentration of molybdate during the electrodeposition process, which can further influence the electron transfer from Ti to Mo atoms, and enhance the binding energy of intermediate species in NO3-RR. The optimized Mo/TiO2-M with more Mo(IV) sites exhibited a better activity for NO3-RR. The Mo/TiO2-M electrode delivered a NH3 yield of 5.18 mg h-1 cm-2 at -1.7 V vs. Ag/AgCl, and exhibited a Faraday efficiency of 88.05% at -1.4 V vs. Ag/AgCl. In addition, the cycling test demonstrated that the Mo/TiO2-M electrode possessed a good stability. This work not only provides an attractive electrode material, but also offers new insights into the rational design of catalysts for NO3-RR.

Enhancing Energy Storage via Confining Sulfite Anions onto Iron Oxide/Poly(3,4-Ethylenedioxythiophene) Heterointerface

Multiple oxidation-state metal oxide has presented a promising charge storage capability for aqueous supercapacitors (SCs); however, the ion insert/deinsert behavior in the bulk phase generally gives a sluggish reaction kinetic and considerable volume effect. Herein, iron oxide/poly(3,4-ethylenedioxythiophene) (Fe2O3/PEDOT) heterointerface was constructed and enabled boosted Faradaic pseudocapacitance by dual-ion-involved redox reactions in Na2SO3 electrolytes. The Fe2O3/PEDOT interface served as a "bridge" to couple electrode and anion SO32- and exhibited a strong force and stable bonding with SO32-, thus providing an additional Faradaic charge storage contribution for SCs. Significantly, the PEDOT-capsulated Fe2O3 nanorod array (Fe2O3@PEDOT) electrode presented a specific capacitance of 338 mF cm-2 at 1 mA cm-2 with 1 M Na2SO3 electrolyte, which was twice that of the pristine Fe2O3 nanorod electrode. The boosted interfaced Faradaic reaction of SO32- partially hindered the intercalation of Na+ in the Fe2O3 bulk phase, efficiently favoring the electrochemical stability.

Thin-film nanocomposite membranes for efficient removal of emerging pharmaceutical organic contaminants from water

Membranes are receiving significant attention to remove emerging organic micropollutants (OMPs) from wastewater and natural water sources. Herein, we report the facile preparation of a novel thin-film nanocomposite (TFN) membrane with high permeability and efficient removal of OMPs. ZnO nanoparticles were first synthesized using the co-precipitation method and functionalized with N1-(3-Trimethoxysilylpropyl)diethylenetriamine to make the surface rich with amine groups and then synthesized nanomaterials were covalently cross-linked into the active layer during the interfacial polymerization (IP) process. The performance of the membranes containing the cross-linked ZnO was significantly better than the non-cross-linked ZnO NPs containing membranes. Adding multiple hydrophilic groups and entities on the surface significantly decreased the contact angle (from ∼60° to 20°). SEM images confirmed the uniform presence and homogeneous distribution of the functionalized NPs throughout the entire membrane surface. Zeta potential measurements showed the modified membranes have a lower negative charge than the pristine membranes. Filtration studies revealed a significant increase in permeability ascribed to the creation of nanochannels in the membrane's active layer. The modified membranes outperformed commercial NF membranes in removing four common OMPs with rejection efficiencies of ∼30%, 64%, 60%, and 70% for Sulfamethoxazole, Amitriptyline, Omeprazole, and Loperamide HCl, respectively. The higher removal efficiency was attributed to the weakened hydrophobic interactions due to the presence of hydrophilic moieties and a stronger size exclusion effect. Moreover, the modified membranes showed high resistance to bacterial adhesion in static conditions.

Advances in the Research of Photo, Electrical, and Magnetic Responsive Smart Superhydrophobic Materials: Synthesis and Potential Applications

With the rapid advancement of technology, the wettability of conventional superhydrophobic materials no longer suffice to meet the demands of practical applications. Intelligent responsive superhydrophobic materials have emerged as a highly sought-after material in various fields. The exceptional superhydrophobicity, reversible wetting, and intelligently controllable characteristics of these materials have led to extensive applications across industries, including industry, agriculture, defense, and medicine. Therefore, the development of intelligent superhydrophobic materials with superior performance, economic practicality, enhanced sensitivity, and controllability assumes utmost importance in advancing technology worldwide. This article provides a summary of the wettability principles of superhydrophobic surfaces and the mechanisms behind intelligent responsive superhydrophobicity. Furthermore, it reviews and analyzes the recent research progress on light, electric, and magnetic responsive superhydrophobic materials, encompassing aspects such as material synthesis, modification, performance, and responses under diverse external stimuli. The article also explores the challenges associated with different types of responsive superhydrophobic materials and the unique application prospects of light, electric, and magnetic responsive superhydrophobic materials. Additionally, it outlines the future directions for the development of intelligent responsive superhydrophobic materials.

Hierarchical Ni-Mn LDHs@CuC2O4 Nanosheet Arrays-Modified Copper Mesh: A Dual-Functional Material for Enhancing Oil/Water Separation and Supercapacitors

The pursuit of superhydrophilic materials with hierarchical structures has garnered significant attention across diverse application domains. In this study, we have successfully crafted Ni-Mn LDHs@CuC2O4 nanosheet arrays on a copper mesh (CM) through a synergistic process involving chemical oxidation and hydrothermal deposition. Initially, CuC2O4 nanosheets were synthesized on the copper mesh, closely followed by the growth of Ni-Mn LDHs nanosheets, culminating in the establishment of a multi-tiered surface architecture with exceptional superhydrophilicity and remarkable underwater superoleophobicity. The resultant Ni-Mn LDHs@CuC2O4 CM membrane showcased an unparalleled amalgamation of traits, including superhydrophilicity, underwater superoleophobicity, and the ability to harness photocatalytic forces for self-cleaning actions, making it an advanced oil-water separation membrane. The membrane's performance was impressive, manifesting in a remarkable water flux range (70 kL·m-2·h-1) and an efficient oil separation capability for both oil/water mixture and surfactant-stabilized emulsions (below 60 ppm). Moreover, the innate superhydrophilic characteristics of the membrane rendered it a prime candidate for deployment as a supercapacitor cathode material. Evidenced by a capacitance of 5080 mF·cm-2 at a current density of 6 mA cm-2 in a 6 M KOH electrolyte, the membrane's potential extended beyond oil-water separation. This work not only introduces a cutting-edge oil-water separation membrane and supercapacitor electrode but also offers a promising blueprint for the deliberate engineering of hierarchical structure arrays to cater to a spectrum of related applications.

A comprehensive review on the behavior and evolution of oil droplets during oil/water separation by membranes

Membrane separation technology has significant advantages for treating oil-in-water emulsions. Understanding the evolution of oil droplets could reveal the interfacial and colloidal interactions, facilitate the design of advanced membranes, and improve the separation performances. This review on the characteristic behavior and evolution of oil droplets focuses on the advanced analytical techniques, and the subsequent fouling as well as demulsification effects during membrane separation. A detailed introduction is provided on microscopic observations and numerical simulations of the dynamic evolution of oil droplets, featuring real-time in-situ visualization and accurate reconstruction, respectively. Characteristic behaviors of these oil droplets include attachment, pinning, wetting, spreading, blockage, intrusion, coalescence, and detachment, which have been quantified by specific proposed parameters and criteria. The fouling process can be evaluated using Hermia and resistance models. The related adhesion force and intrusion pressure as well as droplet-droplet/membrane interfacial interactions can be accurately quantified using various force analysis methods and advanced force measurement techniques. It is encouraging to note that oil coalescence has been achieved through various effects such as electrostatic interactions, mechanical actions, Laplace pressure/surface free energy gradients, and synergistic effects on functional membranes. When oil droplets become destabilized and coalesce into larger ones, the functional membranes can overcome the limitations of size-sieving effect to attain higher separation efficiency. This not only bypasses the trade-off between permeability and rejection, but also significantly reduces membrane fouling. Finally, the challenges and potential research directions in membrane separation are proposed. We hope this review will support the engineering of advanced materials for oil/water separation and research on interface science in general.