Bismuth-based metal-organic framework peroxidase-mimic nanozyme: Preparation and mechanism for colorimetric-converted ultra-trace electrochemical sensing of chromium ion

Carbon dots-loaded cellulose nanofibrils hydrogel incorporating Bi2O3/BiOCOOH for effective adsorption and photocatalytic degradation of lignin

A novel photocatalytic adsorbent, a cellulose nanofibrils based hydrogel incorporating carbon dots and Bi2O3/BiOCOOH (designated as CCHBi), was developed to address lignin pollution. CCHBi exhibited an adsorption capacity of 435.0 mg/g, 8.9 times greater than that of commercial activated carbon. This enhanced adsorption performance was attributed to the 3D porous structure constructed using cellulose nanofibrils (CNs), which increased the specific surface area and provided additional sorption sites. Adsorption and photocatalytic experiments showed that CCHBi had a photocatalytic degradation rate constant of 0.0140 min-1, 3.1 times higher than that of Bi2O3/BiOCOOH. The superior photocatalytic performance of CCHBi was due to the Z-scheme photocatalytic system constructed by carbon dots-loaded cellulose nanofibrils and Bi2O3/BiOCOOH, which facilitated the separation of photoinduced charge carriers. Additionally, the stability of CCHBi was confirmed through consecutive cycles of adsorption and photocatalysis, maintaining a removal efficiency of 85 % after ten cycles. The enhanced stability was due to the 3D porous structure constructed by CNs, which safeguarded the Bi2O3/BiOCOOH. This study validates the potential of CCHBi for high-performance lignin removal and promotes the application of CNs in developing new photocatalytic adsorbents.

A colorimetric and electrochemical dual-mode system for identifying and detecting varied Cr species based on fungus-like porous CoS nanosensor

The differentiation of valence states plays a crucial role in determining the toxicity of chromium (Cr) in environmental samples. In this work, two modes of colorimetric and electrochemical analytical methods based on a fungus like porous CoS (FP CoS) nanosensor were developed for rapid, specific, and portable detection trace/ultra-trace chromium species (Cr(VI) and Cr(III)). The FP CoS exhibited peroxidase activity as a nanozyme for the colorimetric detection of Cr(VI), catalyzing the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to a blue oxidation product (oxTMB) in the presence of Cr(VI) instead of unstable H2O2 as an oxidizer at room temperature over existing methods. Based on the promotion of colorimetric reaction by increasing in Cr(VI) concentration, an effective colorimetric detection of Cr(VI) method was established with a detection limit (LOD) low to 3.93 μg L-1 and unique selectivity for Cr(VI) over 21 interfering ions (containing 15 metal ions and 6 anions). Innovatively, Cr(VI) could be reduced to Cr(III) without TMB, then selectively enriched by redox reaction with FP CoS. Hence, Cr (III) can be selectively and effectively enriched by FP CoS applying voltage, and then detected using cyclic voltammetry, with a lower LOD of 0.116 μg L-1 and high sensitivity ignoring background interferences. By integrating the dual-mode detection channel, the FP CoS nanosensor offers a convenient and flexible method for simultaneously determining Cr(VI), Cr(III), and total chromium in diverse samples.

Metal-Organic Framework (MOF)-Based Sensors for Mercury (Hg) Detection: Design Strategies and Recent Progress

Monitoring mercury (Hg) is critical for environmental and public health. Metal-organic framework (MOF)-based sensors demonstrate the advantage of high sensitivity and rapid response. We summarize the advances of MOF sensors for Hg2+ detection from the perspective of MOF type and role in the sensors. First, we introduce three MOFs used in Hg sensors-UIO, ZIF, and MIL-that have demonstrated superior performance. Then, we discuss the specifics of MOF-based sensors for Hg2+ detection in terms of the recognition and signal elements. Currently, the recognition elements include T-rich aptamers, noble metal nanoparticles, central metal ions, and organic functional groups inherent to MOFs. Sensors with fluorescence and colorimetric signals are the two main types of optical MOF sensors used for Hg detection. Electrochemical sensors have also been fabricated, but these are less frequently reported, potentially due to the limited conductivity and cycling stability of MOFs. Notably, dual-signal sensors mitigate background signals interference and enhance the accuracy of Hg2+ detection. Furthermore, to facilitate portability and user-friendliness, portable devices such as microfluidics, paper-based devices, and smartphones have been developed for Hg2+ detection, showcasing potential applications. We also address the challenges related to MOF-based sensors for Hg2+ and future outlook.

Rational design of monodispersed Au@Pt core-shell nanostructures with excellent peroxidase-mimicking activity for colorimetric detection of Cr(VI)

Cr(VI) is one of the most typical heavy metal contaminants and rapid detection of Cr(VI) is highly important in food control and public health. Herein, a core-shell Au@Pt nanozyme-based colorimetric assay was developed for the rapid and sensitive detection of Cr(VI). The monodispersed Au@Pt core-shell nanoparticles exhibited high peroxidase-mimicking activity and can catalyze colorless TMB into blue-colored oxidized oxTMB. After the addition of Cr(VI), the oxTMB molecules can be reduced into colorless TMB. The ultrathin Pt shell can prevent the Pt component from aggregation, thus improving the catalytic activity of Au@Pt nanozyme. These Au@Pt nanozyme-based Cr(VI) assays exhibited high sensitivity and selectivity and displayed satisfactory recoveries in practical samples. Our work highlights opportunities for the development of core-shell nanozymes with extensive applications in food safety, biomedicine, and environmental monitoring.

Efficient Solid-Phase Extraction of Neonicotinoid Insecticides from Environmental Water and Drink Samples Using a Postmodified Metal-Organic Framework

Neonicotinoid insecticides (NNIs) are extensively utilized globally because of their efficient and broad-spectrum properties. However, their residues are also extensively distributed in the environment. Herein, MIL-101-SO3Na with abundant -NH- and sulfonate groups was synthesized via chloromethylation and nucleophilic substitution postmodification strategies and used to extract NNIs via solid-phase extraction. MIL-101-SO3Na was enhanced by introducing C-H···N hydrogen bonds to strengthen interaction forces and -SO3Na groups to adjust surface charge and enhance electrostatic attraction. This modification and the substantial specific surface area (998 m2·g-1) of the metal-organic framework markedly enhanced the enrichment efficiency of MIL-101. The proposed method based on MIL-101-SO3Na exhibited a minimal detection threshold (0.04-0.87 ng·L-1), an extensive linear spectrum (1-2000 ng·L-1), and notable accuracy (a variation of 3.02-11.8%) in water and drink samples. NNI concentrations between 0.25 and 24.2 ng·L-1 in fruit juice and tea samples were accurately identified using the proposed method, demonstrating its feasibility in practical applications. The postmodification of MIL-101-SO3Na is an exceptional and promising approach for the sensitive detection of ultratrace NNI levels in complex matrices.

Dual-mode aptasensor based on P-CeO2NR@Mxene and exonuclease I-assisted target recycling for malachite green detection

Malachite green (MG) has been illicitly employed in aquaculture as a parasiticide, however, its teratogenic and carcinogenic effects pose a significant human health threat. Herein, a dual-mode colorimetric and electrochemical aptasensor was fabricated for MG detection, capitalizing on the robust catalytic and peroxidase-like activity of P-CeO2NR@Mxene and good capture efficiency of a tetrahedral DNA nanostructure (TDN) designed with multiple aptamers (m-TDN). P-CeO2NR@Mxene-modified complementary DNA (cDNA) served as both colorimetric and electrochemical probe. m-TDN was attached to AuE to capture MG and P-CeO2NR@Mxene/cDNA. The superior aptamer and MG binding to cDNA regulated signals and enabled precise MG quantification. The further introduced Exo I enabled aptamer hydrolysis, releasing MG for further binding rounds, allowing target recycling amplification. Under the optimal conditions, the aptasensor reached an impressively low detection limit 95.4 pM in colorimetric mode and 83.6 fM in electrochemical mode. We believe this dual-mode approach holds promise for veterinary drug residue detection.

Polyoxometalate Functionalized Cyclic Trinuclear Copper Compounds for Bifunctional Electrochemical Detection and Photocatalytic Reduction of Cr(VI)

The design and intentional construction of crystalline materials containing two clusters with redox properties in one framework still remains challenging. Linking oxidative polyoxometalate (POM) clusters and a reductive cyclic trinuclear copper complex (Cu-CTC) to prepare stable catalysts is rarely reported. Herein, we successfully obtained two new polyoxometalate-based metal-organic compounds (POMOCs) [CuII3(PyCA)3(μ3-OH)(β-Mo8O26)0.5(H2O)2]·5H2O (1), [CuII3(PyCA)3(μ3-OH)]2(CuIIW12O40)[CuII(H2O)6] (2) (PyCA = 1H-pyrazole-4-carbaldehyde) by enabling precursors of Cu-CTC and POM cocrystallization in one pot via hydrothermal method. The [β-Mo8O26]4- cluster in compound 1 combined with Cu-CTC units to form a 1D structure, and the [CuW12O40]6- unit in compound 2 linked two Cu-CTC units to form a sandwich-like 0D structure. Also, Cu-CTC CuI3(PyCA)3·H2O (Cu3) was synthesized for performance comparison. A series of characterizations indicate that compound 1 is more conducive to electron transfer than compound 2. In addition, compounds 1 and 2 can act as bifunctional catalysts for the electrochemical detection and photocatalytic reduction of Cr(VI). Particularly, the photoreduction rates of Cr(VI) by compounds 1 and 2 are 96.7% and 96.3% for only 10 and 14 min under visible light, respectively, and it is better than that of Cu3 and most other reported photocatalysts. Furthermore, the active sites and mechanisms for electrochemical detection and photocatalytic reduction of Cr(VI) were discussed.

Recent advances and trends in innovative biosensor-based devices for heavy metal ion detection in food

Low-cost, reliable, and efficient biosensors are crucial in detecting residual heavy metal ions (HMIs) in food products. At present, based on distance-induced localized surface plasmon resonance of noble metal nanoparticles, enzyme-mimetic reaction of nanozymes, and chelation reaction of metal chelators, the constructed optical sensors have attracted wide attention in HMIs detection. Besides, based on the enrichment and signal amplification strategy of nanomaterials on HMIs and the construction of electrochemical aptamer sensing platforms, the developed electrochemical biosensors have overcome the plague of low sensitivity, poor selectivity, and the inability of multiplexed detection in the optical strategy. Moreover, along with an in-depth discussion of these different types of biosensors, a detailed overview of the design and application of innovative devices based on these sensing principles was provided, including microfluidic systems, hydrogel-based platforms, and test strip technologies. Finally, the challenges that hinder commercial application have also been mentioned. Overall, this review aims to establish a theoretical foundation for developing accurate and reliable sensing technologies and devices for HMIs, thereby promoting the widespread application of biosensors in the detection of HMIs in food.

Fluorescent sensor based on bismuth metal-organic frameworks (Bi-MOFs) mimic enzyme for H2O2 detection in real samples and distinction of phenylenediamine isomers

Although peroxidase-like nano-enzymes have been widely utilized in biosensors, nano-enzyme based biosensors are seldom used for both quantitative analysis of H2O2 and differentiation of isomers of organic compounds simultaneously. In this study, a dual-functional mimetic enzyme-based fluorescent sensor was constructed using metal-organic frameworks (Bi-MOFs) with exceptional oxidase activity and fluorescence properties. This mimetic enzyme sensor facilitated quantitative analysis of H2O2 and accurate discrimination of phenylenediamine isomers. The sensor exhibited a wide linear range (0.5-400 μM) and low detection limit (0.16 μM) for the detection of H2O2. Moreover, the sensor can also be used for the discrimination of phenylenediamine isomers, in which the presence of o-phenylenediamine (OPD) leads to the appearance of a new fluorescence emission peak at 555 nm, while the presence of p-phenylenediamine (PPD) significantly quenched its fluorescence due to the internal filtration effect. The proposed strategy exhibited a commendable capability in distinguishing phenylenediamine isomers, thereby paving the way for novel applications of MOFs in the field of environmental science.

Dual-signal detection of tannic acid in red wines based on the peroxidase activity of carbon dots

Herein, a novel type of phosphorus and iron-doped carbon dot (P,Fe-CD) with outstanding peroxidase activity and excellent fluorescence performance was hydrothermally synthesized to colorimetrically and fluorimetrically detect tannic acid (TA). In the presence of 3,3',5,5'-tetramethylbenzidine (TMB) and H2O2, the P,Fe-CDs could oxidize colorless TMB to a blue oxidation product (oxTMB) resulting in an increased value of absorbance. Simultaneously, the fluorescence intensity of P,Fe-CDs at 430 nm could be quenched owing to the fluorescence resonance energy transfer (FRET) between P,Fe-CDs and the generated oxTMB. Meanwhile, after adding the TA to the system containing TMB, H2O2 and P,Fe-CDs, the value of absorbance could be decreased and the fluorescence could be recovered because of the reduction reaction between TA and oxTMB. Therefore, fluorescence intensity and value of absorbance could be applied to quantitatively detect TA with good linearities between the concentration of TA and the fluorescence intensity/value of absorbance (0.997 and 0.997 for the colorimetric signal and fluorimetric one, respectively) and low limits of detection (0.093 μmol L-1 and 0.053 μmol L-1 for the colorimetry and the fluorimetry, respectively), which was successfully applied to the detection of TA in red wines. Moreover, we applied a smartphone-assisted method to the point-of-care detection of TA with accurate results, providing a new technique for TA detection and food quality monitoring.

Recent advancements in modifications of metal-organic frameworks-based materials for enhanced water purification and contaminant detection

Metal-organic frameworks (MOFs) have emerged as a key focus in water treatment and monitoring due to their unique structural features, including extensive surface area, customizable porosity, reversible adsorption, and high catalytic efficiency. While numerous reviews have discussed MOFs in environmental remediation, this review specifically addresses recent advancements in modifying MOFs to enhance their effectiveness in water purification and monitoring. It underscores their roles as adsorbents, photocatalysts, and in luminescent and electrochemical sensing. Advancements such as pore modification, defect engineering, and functionalization, combined synergistically with advanced materials, have led to the development of recyclable MOF-based nano-adsorbents, Z-scheme photocatalytic systems, nanocomposites, and hybrid materials. These innovations have broadened the spectrum of removable contaminants and improved material recyclability. Additionally, this review delves into the creation of multifunctional MOF materials, the development of robust MOF variants, and the simplification of synthesis methods, marking significant progress in MOF sensor technology. Furthermore, the review addresses current challenges in this field and proposes potential future research directions and practical applications. The growing research interest in MOFs underscores the need for an updated synthesis of knowledge in this area, focusing on both current challenges and future opportunities in water remediation.

Nanozyme-Enhanced Electrochemical Biosensors: Mechanisms and Applications

Nanozymes, as innovative materials, have demonstrated remarkable potential in the field of electrochemical biosensors. This article provides an overview of the mechanisms and extensive practical applications of nanozymes in electrochemical biosensors. First, the definition and characteristics of nanozymes are introduced, emphasizing their significant role in constructing efficient sensors. Subsequently, several common categories of nanozyme materials are delved into, including metal-based, carbon-based, metal-organic framework, and layered double hydroxide nanostructures, discussing their applications in electrochemical biosensors. Regarding their mechanisms, two key roles of nanozymes are particularly focused in electrochemical biosensors: selective enhancement and signal amplification, which crucially support the enhancement of sensor performance. In terms of practical applications, the widespread use of nanozyme-based electrochemical biosensors are showcased in various domains. From detecting biomolecules, pollutants, nucleic acids, proteins, to cells, providing robust means for high-sensitivity detection. Furthermore, insights into the future development of nanozyme-based electrochemical biosensors is provided, encompassing improvements and optimizations of nanozyme materials, innovative sensor design and integration, and the expansion of application fields through interdisciplinary collaboration. In conclusion, this article systematically presents the mechanisms and applications of nanozymes in electrochemical biosensors, offering valuable references and prospects for research and development in this field.

Using the Photo-Piezoelectric Effect of AuPt@BaTiO3 Oxidase Mimetics for Colorimetric Detection of GSH in Serum

Nanozymes possess major advantages in catalysis and biosensing compared with natural nanozymes. In this study, the AuPt@BaTiO3 bimetallic alloy Schottky junction is prepared to act as oxidase mimetics, and its photo-piezoelectric effect is investigated. The synergy between the photo-piezoelectric effect and the local surface plasmon resonance enhances the directional migration and separation of photogenerated electrons, as well as hot electrons induced by the AuPt bimetallic alloy. This synergy significantly improves the oxidase-like activity. A GSH colorimetric detection platform is developed based on this fading principle. Leveraging the photo-piezoelectric effect allows for highly sensitive detection with a low detection limit (0.225 μM) and reduces the detection time from 10 min to 3 min. The high recovery rate (ranging from 99.91% to 101.8%) in actual serum detection suggests promising potential for practical applications. The development of bimetallic alloy heterojunctions presents new opportunities for creating efficient nanozymes.

Highly efficient electrochemical detection of H2O2 utilizing an innovative copper porphyrinic nanosheet decorated bismuth metal-organic framework modified electrode

The ability to detect hydrogen peroxide is important due to the presence in biological systems. Researchers are highly interested in developing efficient electrochemical hydrogen peroxide sensors. Metal-organic frameworks (MOFs) with their composites, an emerging class of porous materials, are ideal candidates for heterogeneous catalysts because of their versatile functionalities. Using a facile solvothermal reaction, we fabricated a 2D Cu-TCPP nanosheet uniformly grown on a 3D Bi-MOF. The process takes advantage of the large surface area and pore volume of the Bi-MOF while maintaining the crystallinity of Bi-BTC when Cu-TCPP is added to the surface. The sensor was fabricated by depositing the Bi-BTC-Cu-TCPP nanocomposites on a glassy carbon electrode to conduct electrochemical measurements such as cyclic voltammetry and electrochemical impedance spectroscopy. Finally, differential pulse voltammetry was utilized to investigate the effect of hydrogen peroxide on the electrochemical activity of Bi-BTC-Cu-TCPP deposited on a glassy carbon electrode. This electrode showed high electrochemical performance activity for the reduction of hydrogen peroxide. The sensor showed a linear response to H2O2 in the 10-120 μM concentration range, with a detection limit of 0.20 μM. The sensor was also stable and selective for H2O2 in the presence of other interfering species. This work demonstrates the potential of nanocomposite-based electrochemical sensors for sensitive and selective detection of H2O2. Besides, the modified electrode has many advantages, including remarkable catalytic activity, long-term stability, good reproducibility, and a good signal response during H2O2 reduction.

Recent Progress and Prospect of Metal-Organic Framework-Based Nanozymes in Biomedical Application

A nanozyme is a nanoscale material having enzyme-like properties. It exhibits several superior properties, including low preparation cost, robust catalytic activity, and long-term storage at ambient temperatures. Moreover, high stability enables repetitive use in multiple catalytic reactions. Hence, it is considered a potential replacement for natural enzymes. Enormous research interest in nanozymes in the past two decades has made it imperative to look for better enzyme-mimicking materials for biomedical applications. Given this, research on metal-organic frameworks (MOFs) as a potential nanozyme material has gained momentum. MOFs are advanced hybrid materials made of inorganic metal ions and organic ligands. Their distinct composition, adaptable pore size, structural diversity, and ease in the tunability of physicochemical properties enable MOFs to mimic enzyme-like activities and act as promising nanozyme candidates. This review aims to discuss recent advances in the development of MOF-based nanozymes (MOF-NZs) and highlight their applications in the field of biomedicine. Firstly, different enzyme-mimetic activities exhibited by MOFs are discussed, and insights are given into various strategies to achieve them. Modification and functionalization strategies are deliberated to obtain MOF-NZs with enhanced catalytic activity. Subsequently, applications of MOF-NZs in the biosensing and therapeutics domain are discussed. Finally, the review is concluded by giving insights into the challenges encountered with MOF-NZs and possible directions to overcome them in the future. With this review, we aim to encourage consolidated efforts across enzyme engineering, nanotechnology, materials science, and biomedicine disciplines to inspire exciting innovations in this emerging yet promising field.

Recent advances in metal-organic framework (MOF)-based agricultural sensors for metal ions: a review

Metal ions have great significance for agricultural development, food safety, and human health. In turn, there exists an imperative need for the development of novel, sensitive, and reliable sensing techniques for various metal ions. Agricultural sensors for the diagnosis of both agricultural safety and nutritional health can establish quality and safety traceability systems of both agro-products and food to guarantee human health, even life safety. Metal-organic frameworks (MOFs) are utilized widely for the design of diversified sensors due to their distinctive structural characteristics and extraordinary optical and electrical properties. To serve agricultural sensors better, this review is dedicated to providing a brief overview of the synthesis of MOFs, the modification of MOFs, the fabrication of MOF-based film electrodes, the applications of MOF-based agricultural sensors for metal ions, which are centered on electrochemical sensors and optical sensors, and current challenges of MOF-based agricultural sensors. In addition, this review also provides potential future opportunities for the development and practical application of agricultural sensors.

Immobilization of Enzyme Electrochemical Biosensors and Their Application to Food Bioprocess Monitoring

Electrochemical biosensors based on immobilized enzymes are among the most popular and commercially successful biosensors. The literature in this field suggests that modification of electrodes with nanomaterials is an excellent method for enzyme immobilization, which can greatly improve the stability and sensitivity of the sensor. However, the poor stability, weak reproducibility, and limited lifetime of the enzyme itself still limit the requirements for the development of enzyme electrochemical biosensors for food production process monitoring. Therefore, constructing sensing technologies based on enzyme electrochemical biosensors remains a great challenge. This article outlines the construction principles of four generations of enzyme electrochemical biosensors and discusses the applications of single-enzyme systems, multi-enzyme systems, and nano-enzyme systems developed based on these principles. The article further describes methods to improve enzyme immobilization by combining different types of nanomaterials such as metals and their oxides, graphene-related materials, metal-organic frameworks, carbon nanotubes, and conducting polymers. In addition, the article highlights the challenges and future trends of enzyme electrochemical biosensors, providing theoretical support and future perspectives for further research and development of high-performance enzyme chemical biosensors.

Construction of Mo-Based p-n Heterojunction with Enhanced Oxidase-Mimic Activity for AOPs and Antibiofouling

Advanced oxidation processes (AOPs) are efficient methods to remove poisonous organic pollutants from water. But in AOPs, additional radical providers, such as H2O2, persulfate, and permonosulfate, are indispensable, which not only add the risk of secondary pollution but also increase cost and complexity in operation. To resolve this problem, nanozymes with oxidase-mimic activity are a prospective choice, which can convert O2 in the air to ·OH and degrade organic pollutants. Here, CoMoO4/MoS2, a nanozyme with excellent oxidase-mimic activity, is synthesized. In the structure, the p-n heterojunction generates between p-type CoMoO4 and n-type MoS2. Energy band analysis and theoretical calculations suggest the p-n heterojunction intensifies adsorption toward O2, which improves oxidase-mimic activity. This facilitates the generation of ·OH and improves organic pollutant degradation performance with AOPs. Furthermore, CoMoO4/MoS2 also exhibits an antibiofouling ability due to the existence of ·OH. This work clarifies the connection between the structure and oxidase-mimic activity for nanozymes with the p-n heterojunction. More importantly, a new AOP without additional radical providers is developed based on oxidase-mimic activity.

Advances in the application of metal-organic framework nanozymes in colorimetric sensing of heavy metal ions

Nanozymes, which can be defined as nanomaterials with excellent catalytic function, are well known to the scientific community due to their distinct merits, such as low cost and high stability, which render them preferable to natural enzymes. As porous organic-inorganic coordination materials, metal-organic frameworks (MOFs) possess a large number of active sites and thus can effectively mimic the properties of natural enzymes. Recently, MOF-based nanozymes have also exhibited good application potential for the analysis of heavy metal ions. In comparison to the traditional detection methods for heavy metal ions, nanozyme-based colorimetric sensing permits intuitive visual analysis by using relatively simple instruments, facilitating rapid and simple on-site screening. In this minireview, the preparation of MOF-based nanozymes and the different nanozyme activity types are briefly described, such as peroxidase-like and oxidase-like, and the relevant catalytic mechanisms are elaborated. Based on this, different response mechanisms of MOF-based colorimetric methods to heavy metal ions, such as turn-off, turn-on, and turn-off-on, are discussed. In addition, the colorimetric sensing applications of MOF-based nanozymes for the detection of heavy metal ions are summarized. Finally, the current research status of MOF-based nanozymes and the future development direction are discussed.

Tri-element nanozyme PtCuSe as an ingenious cascade catalytic machine for the amelioration of Parkinson's disease-like symptoms

Parkinson's disease (PD), as the second most common neurodegenerative disease after Alzheimer's, has become intractable with the increasing aging global population. The exploration of nanomedicine has broadened the opportunities for developing novel neuroprotective therapies. In particular, polymetallic functional nanomaterials have been widely used in the biomedicine field in recent years, exhibiting flexible and diversified functions and controllable properties. In this study, a tri-element nanozyme (PtCuSe nanozyme) has been developed with desirable CAT- and SOD-like activities for the cascade scavenging of reactive oxygen species (ROS). In particular, the nanozyme is suitable for relieving nerve cell damage by removing reactive oxygen species in cells and mitigating the behavioral and pathological symptoms in animal models of Parkinson's disease. Therefore, this ingenious tri-element nanozyme may have potential in the treatment of Parkinson's disease and other neurodegenerative diseases.