Green synthesis of ZnO nanoparticles using Acalypha indica leaf extract and their photocatalyst degradation and antibacterial activity

Adsorption performance with field emission scanning electron microscopy of fruit peel induced Silver Nanoparticles in C16H18ClN3S for waste water treatment

There is a growing demand for cost-effective and sustainable technologies for treating wastewater as water consumption increases and conventional technologies become more expensive. Nanoparticles have a great deal of potential for use in the treatment of waste water. Their unique surface area allows them to effectively remove toxic metal ions, pathogenic microorganisms, organic and inorganic solutes from water. This study investigated the potential of orange and banana peels as renewable nano adsorbents for removing dyes and dissolved organic compounds from textile wastewater. Orange and banana peels are an optimal selection due to their favourable chemical characteristics, namely the presence of cellulose, pectic, hemicellulose, and lignin. Their capacity to adsorb diverse anionic and cationic compounds on their surface-active sites is attributed to their unique functional group compositions. Silver nanoparticles are able to adsorb heavy metals due to their exceptionally low electrical and thermal resistance and surface plasmon resonance. The samples were thoroughly characterised using field emission scanning electron microscopy (FESEM), UV-Visible spectrometry, Fourier transform infrared spectroscopy (FTIR) and XRD. The nanoparticles were prepared (10 gm,50 gm,100 gm) and subsequently introduced to the wastewater sample. The optical density values were recorded at various time points. The optical density values demonstrate a decline over the course of the experiment, with a notable decrease observed over time. The results of this study provide valuable insights into the efficacy of these natural adsorbents and their potential for sustainable water purification technologies. For the purpose of this research, high performance instrumentation methods were performed as follows:•Field emission scanning electron microscopy for surface morphology studies.•Gas chromatography-mass spectrometry (GC-MS) for analytical technique that combines gas chromatography (GC) and mass spectrometry (MS) to identify unknown substances or contaminants.•Optical density values were measured for different timings of degradation.

Effect of ZnO/EAF slag doping on removal of methyl red dye (MR) from industrial waste water

Zinc oxide doped with EAF slag (ZnO/ EAF slag) nanoparticles in different contents (10, 20) % of waste were synthesized in a controlled and reproducible way using spin-coater. The produced nanomaterial's physicochemical and structural characteristics were ascertained by means of particle size distribution, TEM, SEM, UV-Vis spectroscopy, XRD, FTIR, and XRF. The role and effect of EAF slag with constant percent doping with ZnO on the ability to remove pollutants was determined by observing the methyl red (MR) elimination in an aqueous solution at λmax = 413 nm and MR dye removal concentration was evaluated from its optical density. Irradiation of the compounds in sunlight intensity 250 KW/nh.m2 and temperature 36 °c resulted in a larger degree of MR removal from the solution, resulting in ZnO/EAF slag samples exhibiting increased photo activity. As a conclusion ZnO nanoparticles saturated with 20% EAF slag as a waste material were the most efficient in removing methyl red (MR) achieving ~ 96% removal and a completely transparent solution after 2 h of testing.

Green synthesized nitrogen-doped nickel hexacyanoferrate incorporated in guar gum-xanthan gel for efficient sunlight-driven degradation of water pollutants

Herein, nitrogen-doped nickel hexacyanoferrate (N@NiHCF) nanoparticles were prepared via co-precipitation and incorporated in guar gum (GG)-Xanthan gum (Xa) based-polymeric-matrix (GGXa@N@NiHCF) for efficient removal of rose bengal (RB) dye and nonyl phenol (NP) pollutants under sunlight. PXRD, FESEM, XPS, and FTIR analysis verified successful integration of N@NiHCF nanoparticles into GGXa matrix. Scherrer and Williamson-Hall equations estimated average-crystallite sizes of GGXa@N@NiHCF nanoparticles to be 16.34 nm. TGA analysis and zeta potential values (-17.7 mV for N@NiHCF and -22.9 mV for GGXa@N@NiHCF nanocomposite) confirmed structural stability. N@NiHCF has band gap of 2.3 eV, demonstrating enhanced photocatalytic efficiency due to improved light absorption and charge separation. Photocatalytic experiments demonstrated high degradation rates of RB (91 %) in 150 min and NP (95 %) in 300 min under optimized conditions highlighting composite's effectiveness. Kinetics of photodegradation process were studied using Hinshelwood formula, yielding rate constant of 0.93 min-1 (t1/2 = 0.74 h) for RB and 0.60 min-1 (t1/2 = 1.14 h) for NP with GGXa@N@NiHCF. LC-MS analysis identified degradation pathways, indicating transformation of pollutants into safer byproducts. Recyclability study showed sustained performance over multiple cycles, emphasizing nanocomposite's durability. This study provides insights into applying GGXa@N@NiHCF, highlighting its promise as a sustainable approach for mitigating water pollution.

Facile synthesis of ZnO nanoparticles using Nigella Sativa extract and its role as catalyst in production of bio-oil and degradation of methylene blue dye

Zinc Oxide (ZnO) nanoparticles (NPs) were synthesized using an environmentally benign biogenic approach employing an extract of kernels of Nigella Sativa (kalonji). The presence of primary and secondary metabolites in Nigella Sativa extract acted as the capping and reducing agent. The as-synthesized ZnO NPs were characterized using various advanced techniques i.e., UV, SEM, XRD, EDS, TGA, DSC, and FTIR spectra. UV characterization of ZnO NPs revealed a peak within the 350-400 cm-1 range, confirming their successful formation. XRD spectra revealed that the particles possess a nano-rods and platelets structure, with an average size of 65 nm. XRD analysis revealed that the particles possess a size of 65 nm with a nano-rods and platelets structure. FTIR spectra of the ZnO NPs exhibited a peak at a wavenumber range of 500-600 cm-1. The newly fabricated ZnO NPs were utilized in a pyrolysis reaction for the production of high-yield bio-oil, resulting in a maximum yield of 65.6 % at 350 °C. The spectra of the bio-oil display distinct peaks at 1340 cm-1, 2923.6 cm-1, and 1617 cm-1, which suggest the existence of phenolic and carbonyl chemicals. After incubating for 24 h under UV light, they also demonstrated significant catalytic degradation of methylene blue dye. The highest degradation was recorded to be an average of 71 % in 60 min of UV exposure. Taken together, ZnO NPs developed by eco-benign methods have the potential to be implemented as a novel catalytic system in the production of bio-oil as well as the remediation of dye-harboring industrial wastewater.

Enhanced photocatalytic activity of green synthesized zinc oxide nanoparticles using low-cost plant extracts

Developing stable and highly efficient metal oxide photocatalysts remains a significant challenge in managing organic pollutants. In this study, zinc oxide nanoparticles (ZnO NPs) were successfully synthesized using various plant extracts, pomegranate (P.M), beetroot roots (B.S), and seder, along with a chemical process. The produced ZnO NPs were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), ultraviolet-visible spectroscopy (UV-Vis), Field Emission Scanning Electron Microscope (FESEM), High-Resolution Transmission Electron Microscopy (HRTEM), and Surface Area. For all prepared samples, the results indicated that the composition of the plant extract affects several characteristics of the produced particles, such as their photocatalytic properties, energy bandgap (Eg), particle size, and the ratio of the two intensity (0 0 2) and (1 0 0) crystalline planes. The particle size of the produced NPs varies between 20 and 30 nm. To examine NPs' photocatalytic activity in the presence of UV light, Methyl Orange (MO) was utilized. The Eg of  ZnO synthesized by the chemical method was 3.16 e. V, whereas it was 2.84, 2.63, and 2.59 for P.M, Seder, and B.S extracts, respectively. The most effective ZnO NPs, synthesized using Beetroots, exhibited a degradation efficiency of 87 ± 0.5% with a kinetic rate constant of 0.007 min-1. The ratio of the two intensity (0 0 2) and (1 0 0) crystalline planes was also examined to determine a specific orientation in (0 0 2) that is linked to the production of oxygen vacancies in ZnO, which enhances their photocatalytic efficiency. Furthermore, the increase in photocatalytic effectiveness can be attributed to the improved light absorption by the inter-band gap states and effective charge transfer.

Recent advancements in sustainable synthesis of zinc oxide nanoparticles using various plant extracts for environmental remediation

The sustainable synthesis of zinc oxide nanoparticles (ZnO-NPs) using plant extracts has gained significant attention in recent years due to its eco-friendly nature and potential applications in numerous fields. This synthetic approach reduces the reliance on non-renewable resources and eliminates the need for hazardous chemicals, minimizing environmental pollution and human health risks. These ZnO-NPs can be used in environmental remediation applications, such as wastewater treatment or soil remediation, effectively removing pollutants and improving overall ecosystem health. These NPs possess a high surface area and band gap of 3.2 eV, can produce both OH° (hydroxide) and O2-° (superoxide) radicals for the generation of holes (h+) and electrons (e-), resulting in oxidation and reduction of the pollutants in their valence band (VB) and conduction band (CB) resulting in degradation of dyes (95-100% degradation of MB, MO, and RhB dyes), reduction and removal of heavy metal ions (Cu2+, Pb2+, Cr6+, etc.), degradation of pharmaceutical compounds (paracetamol, urea, fluoroquinolone (ciprofloxacin)) using photocatalysis. Here, we review an overview of various plant extracts used for the green synthesis of ZnO NPs and their potential applications in environmental remediation including photocatalysis, adsorption, and heavy metal remediation. This review summarizes the most recent studies and further research perspectives to explore their applications in various fields.

Multifunctional characteristics of biosynthesized CoFe2O4@Ag nanocomposite by photocatalytic, antibacterial and cytotoxic applications

Carissa carandas, a traditional medicinal herb with a high concentration of antioxidant phytochemicals, has been used for thousands of years in the Ayurveda, Unani, and homoeopathic schools of medicine. By employing Carissa carandas bark extract as a reducing and capping agent in green biosynthesis, we extend this conventional application to produce CoFe2O4 and CoFe2O4@Ag nanocomposite. A variety of techniques have been used to characterize the synthesised nanocomposite, including UV-Vis, FTIR, XRD, FESEM, EDX, and BET. The CoFe2O4 and CoFe2O4@Ag nanocomposite demonstrated promising antibacterial action against human bacterial pathogens like B. subtilis and S. aureus as gram positive and P. aeruginosa and E. coli as gram negative with inhibition zones of 24.3 ± 0.57, 17.4 ± 0.75 and 20.5 ± 0.5, 19.8 ± 1.6 mm respectively, and the obtained results were superior to the nanocomposite without silver. Moreover, in-vitro cytotoxicity effects of biosynthesized CoFe2O4 and CoFe2O4@Ag were performed on the human breast cancer cell MCF-7. It was found that the MCF-7 cells' 50% inhibitory concentration (IC50) was 60 μg/mL. Additionally, biosynthesized CoFe2O4 and CoFe2O4@Ag nanocomposite was used to demonstrate the photocatalytic eradication of Rhodamine Blue (RhB). Due to the addition of Ag, which increases surface area, conductivity, and increased charge carrier separation, the CoFe2O4@Ag nanocomposite exhibits a high percentage of photocatalytic degradation of ⁓ 98% within 35 min under UV light irradiation. The photocatalytic performance of as-synthesised nanocomposite was evaluated using dye degradation-adsorption in both natural light and dark condition. Under dark conditions, it was found that 2 mg mL-1 CoFe2O4@Ag in RhB aqueous solution (5 ppm) causes dye adsorption in 30 min with an effectiveness of 72%. Consequently, it is anticipated that the CoFe2O4@Ag nanocomposite will be a promising photocatalyst and possibly a noble material for environmental remediation applications.

Theoretical and Experimental Study of the Photocatalytic Properties of ZnO Semiconductor Nanoparticles Synthesized by Prosopis laevigata

In this work, the photocatalytic activity of nanoparticles (NPs) of zinc oxide synthetized by Prosopis laevigata as a stabilizing agent was evaluated in the degradation of methylene blue (MB) dye under UV radiation. The theoretical study of the photocatalytic degradation process was carried out by a Langmuir-Hinshelwood-Hougen-Watson (LHHW) model. Zinc oxide nanoparticles were synthesized by varying the concentration of natural extract of Prosopis laevigata from 1, 2, and 4% (weight/volume), identifying the samples as ZnO_PL1%, ZnO_PL2%, and ZnO_PL4%, respectively. The characterization of the nanoparticles was carried out by Fourier transform infrared spectroscopy (FT-IR), where the absorption band for the Zn-O vibration at 400 cm-1 was presented; by ultraviolet-visible spectroscopy (UV-vis) the value of the band gap was calculated, resulting in 2.80, 2.74 and 2.63 eV for the samples ZnO_PL1%, ZnO_PL2%, and ZnO_PL4%, respectively; XRD analysis indicated that the nanoparticles have a hexagonal zincite crystal structure with an average crystal size of 55, 50, and 49 in the sample ZnO_PL1%, ZnO_PL2%, and ZnO_PL4%, respectively. The morphology observed by TEM showed that the nanoparticles had a hemispherical shape, and the ZnO_PL4% sample presented sizes ranging between 29 and 45 nm. The photocatalytic study showed a total degradation of the MB in 150, 120, and 60 min for the samples ZnO_PL1%, ZnO_PL2%, and ZnO_PL4%, respectively. Also, the model explains the experimental observation of the first-order kinetic model in the limit of low concentrations of dye, indicating the influence of the mass transfer processes.

Green inspired synthesis of zinc oxide nanoparticles using Silybum marianum (milk thistle) extract and evaluation of their potential pesticidal and phytopathogens activities

Background

The green approaches for the synthesis of nanoparticles are gaining significant importance because of their high productivity, purity, low cost, biocompatibility, and environmental friendliness.

Methods

The aim of the current study is the green synthesis of zinc oxide nanoparticles (ZnO-NPs) using seed extracts of Silybum marianum, which acts as a reducing and stabilizing agent. central composite design (CCD) of response surface methodology (RSM) optimized synthesis parameters (temperature, pH, reaction time, plant extract, and salt concentration) for controlled size, stability, and maximum yields of ZnO-NPs. Green synthesized ZnO-NPs was characterized using UV-visible spectroscopy and Zetasizer analyses.

Results

The Zetasizer confirmed that green synthesized ZnO-NPs were 51.80 nm in size and monodispersed in nature. The UV-visible results revealed a large band gap energy in the visible region at 360.5 nm wavelength. The bioactivities of green synthesized ZnO-NPs, including antifungal, antibacterial, and pesticidal, were also evaluated. Data analysis confirmed that these activities were concentration dependent. Bio-synthesized ZnO-NPs showed higher mortality towards Tribolium castaneum of about 78 ± 0.57% after 72 h observation as compared to Sitophilus oryzae, which only displayed 74 ± 0.57% at the same concentration and time intervals. Plant-mediated ZnO-NPs also showed high potential against pathogenic gram-positive bacteria (Clavibacter michiganensis), gram-negative bacteria (Pseudomonas syringae), and two fungal strains such as Fusarium oxysporum, and Aspergillums niger with inhibition zones of 18 ± 0.4, 25 ± 0.4, 21 ± 0.57, and 19 ± 0.4 mm, respectively.

Conclusion

The results of this study showed that Silybum marianum-based ZnO-NPs are cost-effective and efficient against crop pests.

Synthesis of palladium nanoparticles stabilized on Schiff base-modified ZnO particles as a nanoscale catalyst for the phosphine-free Heck coupling reaction and 4-nitrophenol reduction

Recently, the development of heterogeneous nanocatalytic systems using solid supports has been gaining importance due to some advantages such as easy handling, high thermal stability, high efficiency, reusability, and so on. Therefore, the design of catalyst supports for the preparation of stable heterogeneous catalytic systems is of great importance. In this work, Schiff base-modified ZnO particles have been developed (ZnO-Scb) as a novel support. A heterogeneous nanocatalyst system has then been prepared by immobilizing palladium nanoparticles (Pd NPs) on the ZnO-Scb surface as the support. The resulting palladium nanocatalyst (Pd-ZnO-Scb) structure has been characterized by different analytical techniques (FT-IR, XRD, TEM, FE-SEM, elemental mapping and EDS) and used to catalyze the Heck coupling reactions and 4-nitrophenol (4-NP) reduction. Test results revealed that Pd-ZnO-Scb could effectively couple various aryl halides with styrene in yields of up to 98% in short reaction times. Pd-ZnO-Scb was also efficiently used in the complete 4-NP reduction within 135 s at room temperature. Additionally, it was found that Pd-ZnO-Scb was more effective than other reported catalysts in the Heck coupling reaction. Moreover, the recycling tests indicated that Pd-ZnO-Scb could be easily isolated from the reaction medium and reused in seven consecutive catalytic runs while retaining its nanostructure.

Recent progress on plant extract-mediated biosynthesis of ZnO-based nanocatalysts for environmental remediation: Challenges and future outlooks

The plant extract mediated green synthesis of nanomaterials has attracts enormous interest due to its cost-effectiveness, greener, and environmentally friendly. It is also considered as an alternative and facile method in which the phytochemicals can be used as a natural capping and reducing agents and helped to produce nanomaterials with high surface area, different sizes, and shapes. One of the materials fabricated using green methods is zinc oxide (ZnO) semiconductor due to its enormous applications in different field areas. In this review, an overview of recent progress on green synthesized ZnO-based catalysts and various modification methods for the purpose of enhancing the catalytic activity of ZnO and the corresponding structural-activity and interactions towards the removal of pollutants are highlighted. Particularly, the plant extract mediated ZnO-based photocatalysts application for the removal of pollutants via photocatalytic degradation, reduction reaction, and adsorption mechanism are demonstrated. Besides, the opportunities, challenges, and future outlooks of ZnO-based materials for environmental remediation with green and sustainable methods are also included. We believe that this review is a timely and comprehensive review on the recent progress related to plant extract mediated ZnO-based nanocatalysts synthesis and applications for environmental remediation.

Effect of Na and Al doping on ZnO nanoparticles for potential application in sunscreens

This study investigated the environment-friendly production and characterization of zinc oxide nanoparticles (ZnO NPs) doped with sodium (Na) and aluminum (Al) metals to decrease the photocatalytic activity of ZnO for use in sunscreen. The metal-doped zinc oxide (ZnO) materials were prepared by the microwave method using extracts of Averrhoa carambola, also known as star fruit, as a reducing agent. The effects of metal-ion doping on the crystal structure, morphology, and optical characteristics of ZnO were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDX), transmission electron microscopy (TEM), and ultraviolet-visible (UV-Vis) spectroscopy. The sun protection factor (SPF) of the sunscreen formulations containing undoped ZnO, Na-doped ZnO (Na/ZnO), and Al-doped ZnO (Al/ZnO) NPs were found to be 10.10, 25.10, and 43.08, respectively. Therefore, Na/ZnO and Al/ZnO showed increased SPF. Additionally, the prepared nanomaterials and sunscreens were effective against Gram-positive and Gram-negative bacteria and showed antioxidant activities. The methylene blue (MB) degradation was used to evaluate the photocatalytic activities of the undoped ZnO, Na/ZnO, and Al/ZnO NPs, which were found to be 66%, 46%, and 38%, respectively. Therefore, due to the structural defects of ZnO NPs, their photocatalytic activity was decreased with Na- and Al- doping. Additionally, Al/ZnO is an ideal candidate as an ingredient in sunscreens.

Bombax ceiba flower extract mediated synthesis of Se nanoparticles for antibacterial activity and urea detection

Plant mediated synthesis of metallic nanomaterials has emerged as a non-toxic and economical approach to their applications in diverse fields especially in biomedical sciences. Herein, this study first time reporting the use of Bombax ceiba flower extract for synthesis of selenium nanoparticles (SeNPs). Initially, SeNPs were confirmed by turning the color of reaction mixtures from light yellow to brick-red. Scanning electron microscope (SEM) and Transmission electron microscopy (TEM) images showed spherical shaped nanoparticles with smooth surface, size ranges between 30 and 150 nm. Dynamic light scattering (DLS) showed 100-150 nm for the distribution of particle size. X-ray diffraction (XRD) analysis revealed SeNPs crystallinity and confirmed by matching with selenium JCPD card No. 06-362. Energy-dispersive X-ray (EDX) spectra showed presence of pure Se peaks that corroborate the conversion of selenium ions into its elemental form by bio-reduction. Fourier-transform infrared spectroscopy (FTIR) spectra demonstrated that involvement of -OH, C-H, C=C, and C=O functional groups for SeNPs formation. Raman Spectra peaks at 250 cm^-1 represent asymmetric trigonal selenium (t-Se). Ultraviolet-visible spectrophotometer (UV-Vis) peaks at 296 and 306 nm which is an indication of surface plasmon resonance (SPR). Moreover, maximum antibacterial activity of SeNPs were observed against Staphylococcus aureus- a gram positive bacteria that possess zone of inhibition (ZOI) 20 mm and Klebsiella pneumonia and Pseudomonas aeruginosa-gram negative bacteria with ZOI 28 mm, respectively, at concentration 100 µg/ml. In addition, the surface functionalities induced through extract components adhere over Se binds with urea and give its detection up to 1mM in milk sample. Conclusively, synthesized SeNPs may function as a potential antibacterial pharmaceutical candidate.