Nano-TiO2 modified with 2-mercaptobenzimidazole as an efficient adsorbent for removal of Ag(I) from aqueous solutions

The design of high-efficient MOFs for selective Ag(I) capture: DFT calculations and practical applications

Recovering silver from wastewater not only significantly reduces environmental harm but also meets the growing demand for silver in modern industry. Here, a novel metal-organic framework adsorbent (MOF-RD) using rhodanine derivatives as linkers is introduced for the efficient and selective capture of silver ions in real wastewater. The adsorption of MOF-RD followed pseudo-second-order and Sips models, and thermodynamic investigations revealed the process to be endothermic. MOF-RD demonstrated a remarkable adsorption capacity of 707.2 mg·g-1 for Ag(I) at pH 5 and 318 K. The interaction between silver ions and MOF-RD was mainly electrostatic attraction and coordination, with coordination primarily occurring at the CO and CS sites within the rhodanine motif. The practical applicability of MOF-RD for selective adsorption of Ag(I) was validated in actual wastewater with high-concentration competing metal ions. Furthermore, after 10 adsorption-desorption cycle experiments, MOF-RD still retained a strong regenerative capability. The results reveal the good potential of MOF-RD as an adsorbent for selectively recovering Ag(I) from industrial wastewater. Additionally, the strategies and methods adopted in this article also provide new perspectives and technical paths for the separation and recovery of other metal ions in wastewater.

High-performance carbon/MnO2 micromotors and their applications for pollutant removal

The wide applications of particulate micromotors in practice, especially in the removal of environmental pollutants, have been limited by the low production yields and demand on high concentration of fuel such as H₂O₂. Carbon/MnO₂ micromotors were made hydrothermally using different carbon allotropes including graphite, carbon nanotube (CNT), and graphene for treatment of methylene blue and toxic Ag ions. The obtained micromotors showed high speed of self-propulsion. The highest speed of MnO₂-based micromotors to date was observed for CNT/MnO₂ (>2 mm/s, 5 wt% H₂O₂, 0.5 wt% surfactant). Moreover, different from previous studies, even with low H₂O₂ concentration (0.5 wt%) and without surfactant addition, the micromotors could also be well dispersed in water by the O₂ stream released from their reaction with H₂O₂. The carbon/MnO₂ micromotors removed both methylene blue (>80%) and Ag ions (100%) effectively within 15 min by catalytic decomposition and adsorption. Especially high adsorption capacity of Ag (600 mg/g) was measured on graphite/MnO₂ and graphene/MnO₂ micromotors.

Engineering nanomaterials for water and wastewater treatment: review of classifications, properties and applications

Based on their characteristics and applicability, a new category of NMs is proposed for water and wastewater treatment.

Facile Synthesis, Characterization of Poly-2-mercapto-1,3,4-thiadiazole Nanoparticles for Rapid Removal of Mercury and Silver Ions from Aqueous Solutions

Industrial pollution by heavy metal ions such as Hg2+ and Ag⁺ is a universal problem owing to the toxicity of heavy metals. In this study, a novel nano-adsorbent, i.e., poly-2-mercapto-1,3,4-thiadiazole (PTT), was synthesized and used to selectively adsorb mercury and silver ions from aqueous solutions. PTT nanoparticles were synthesized via chemical oxidative dehydrogenation polymerization under mild conditions. Oxidant species, medium, monomer concentration, oxidant/monomer molar ratio, and polymerization temperature were optimized to obtain optimum yields. The molecular structure and morphology of the nanoparticles were analyzed by ultraviolet-visible (UV-Vis), Fourier transform infrared (FT-IR), matrix-assisted laser desorption/ionization/time-of-flight (MALDI/TOF) mass and X-ray photoelectron (XPS) spectroscopies, wide-angle X-ray diffraction (WAXD), theoretical calculations and transmission electron microscopy (TEM), respectively. It was found that the polymerization of 2-mercapto-1,3,4-thiodiazole occurs through head-to-tail coupling between the S(2) and C(5) positions. The PTT nanoparticles having a peculiar synergic combination of four kinds of active groups, S⁻, ⁻SH, N⁻N, and =N⁻ with a small particle size of 30⁻200 nm exhibit ultrarapid initial adsorption rates of 1500 mg(Hg)·g-1·h-1 and 5364 mg(Ag)·g-1·h-1 and high adsorption capacities of up to 186.9 mg(Hg)·g-1 and 193.1 mg(Ag)·g-1, becoming ultrafast chelate nanosorbents with high adsorption capacities. Kinetic study indicates that the adsorption of Hg2+ and Ag⁺ follows the pseudo-second-order model, suggesting a chemical adsorption as the rate-limiting step during the adsorption process. The Hg2+ and Ag⁺-loaded PTT nanoparticles could be effectively regenerated with 0.1 mol·L-1 EDTA or 1 mol·L-1 HNO₃ without significantly losing their adsorption capacities even after five adsorption⁻desorption cycles. With these impressive properties, PTT nanoparticles are very promising materials in the fields of water-treatment and precious metals recovery.

Ion Imprinted Polymer for Preconcentration and Determination of Ultra-Trace Cadmium, Employing Flow Injection Analysis with Thermo Spray Flame Furnace Atomic Absorption Spectrometry

This work proposes a preconcentration method using an ion imprinted polymer (IIP) for determination of cadmium, in several samples, employing a mini-column filled with the polymer coupled into a flow injection analysis system with detection by thermospray flame furnace atomic absorption spectrometry (FIA-TS-FF-AAS). The polymer was synthesized via bulk using methacrylic acid and vinylimidazole as a functional monomer. For the FIA system initial assessment, the variables: pH, eluent concentration and buffer concentration were studied, employing a 23 full factorial design. To obtain the optimum values for each significant variable, a Doehlert matrix was employed. After the optimization conditions as: pH 5.8, eluent (HNO3) concentration of 0.48 mol L^-1 and buffer concentration of 0.01 mol L^-1, were adopted. The proposed method showed a linear response in the range of 0.081-10.0 μg L^-1, limits detection and quantification of 0.024 and 0.081 μg L^-1, respectively; preconcentration factor of 165, consumptive index of 0.06 mL, concentration efficiency 132 min^-1, and frequency of readings equal to 26 readings h^-1 The accuracy was checked by analysis of certified reference materials for trace metals and recovery tests. The obtained results were in agreement with 95% confidence level (t-test). The method was adequate to apply in samples of: jewelry (earrings) (2.38 ± 0.28 μg kg^-1), black tea (1.09 ± 0.15 μg kg^-1), green tea (3.85 ± 0.13 μg kg^-1), cigarette tobacco (38.27 ± 0.22 μg kg^-1), and hair (0.35 ± 0.02 μg kg^-1).

Construction of adsorptive nanorods from polyoxometalates and ionic liquid and their adsorption properties for silver ion from AMD

A new structure of hybrid nanorods adsorbent ([n-BBIM]9PW9O34) was synthesized by a simple molecular assembly of polyoxometalates with ionic liquids (ILs). The nanocomposite was characterized by Fourier transform infrared (FT-IR), ultraviolet-visible (UV-Vis), scanning electron microscope, energy dispersive X-ray and X-ray diffractometer. Adsorption of silver from acid mine drainage (AMD) was studied using batch experiments. The impact of several parameters, like ion concentration, pH, adsorbent dosage, and temperature was elucidated and optimization was carried out by single-factor experiment and response surface methodology. Analysis of variance of the quadratic model suggested that experimental data were excellently fitted to the quadratic model. Optimum conditions for removal of Ag(+) from AMD were determined to be an initial concentration 143 mg/L, adsorbent dosage 2.69 g/L, temperature 35 °C to achieve the maximum adsorption of Ag(+) 99.03%, which was very close to the predicted value (100%). The adsorption was confirmed as oxidation-reduction mechanism following a complexation process, and has been verified according to results from FT-IR and UV-vis spectra. The selective experiment suggested that the nanorods adsorbent could adsorb silver ions in AMD well. Based on the adsorption/desorption study result, the adsorbent can be efficiently recovered.

Nanocelluloses and their phosphorylated derivatives for selective adsorption of Ag(+), Cu(2+) and Fe(3+) from industrial effluents

The potential of nanoscaled cellulose and enzymatically phosphorylated derivatives as bio-adsorbents to remove metal ions (Ag(+), Cu(2+) and Fe(3+)) from model water and industrial effluents is demonstrated. Introduction of phosphate groups onto nanocelluloses significantly improved the metal sorption velocity and sorption capacity. The removal efficiency was considered to be driven by the high surface area of these nanomaterials as well as the nature and density of functional groups on the nanocellulose surface. Generally, in the solutions containing only single types of metal ions, the metal ion selectivity was in the order Ag(+)>Cu(2+)>Fe(3+), while in the case of mixtures of ions, the order changed to Ag(+)>Fe(3+)>Cu(2+), irrespective of the surface functionality of the nanocellulose. In the case of industrial effluent from the mirror making industry, 99% removal of Cu(2+) and Fe(3+) by phosphorylated nanocellulose was observed. The study showed that phosphorylated nanocelluloses are highly efficient biomaterials for scavenging multiple metal ions, simultaneously, from industrial effluents.