Adsorption of basic red 9 on activated waste Gossypium hirsutum seeds: Process modeling, analysis and optimization using statistical design

Contamination of textile dyes in aquatic environment: Adverse impacts on aquatic ecosystem and human health, and its management using bioremediation

Textile dyes are the burgeoning environmental contaminants across the world. They might be directly disposed of from textile industries into the aquatic bodies, which act as the direct source for the entire ecosystem, ultimately impacting the human beings. Hence, it is essential to dissect the potential adverse outcomes of textile dye exposure on aquatic plants, aquatic fauna, terrestrial entities, and humans. Analysis of appropriate literature has revealed that textile dye effluents could affect the aquatic biota by disrupting their growth and reproduction. Various aquatic organisms are targeted by textile dye effluents. In such organisms, these chemicals affect their development, behavior, and induce oxidative stress. General populations of humans are exposed to textile dyes via the food chain and drinking contaminated water. In humans, textile dyes are biotransformed into electrophilic intermediates and aromatic amines by the enzymes of the cytochrome family. Textile dyes and their biotransformed products form the DNA and protein adducts at sub-cellular moiety. Moreover, these compounds catalyze the production of free radicals and oxidative stress, and trigger the apoptotic cascades to produce lesions in multiple organs. In addition, textile dyes modulate epigenetic factors like DNA methyltransferase and histone deacetylase to promote carcinogenesis. Several bioremediation approaches involving algae, fungi, bacteria, biomembrane filtration techniques, etc., have been tested and some other hybrid systems are currently under investigation to treat textile dye effluents. However, many such approaches are at the trial stage and require further research to develop more efficient, cost-effective, and easy-to-handle techniques.

Unveiling the Dual Nature of Heavy Metals: Stressors and Promoters of Phenolic Compound Biosynthesis in Basilicum polystachyon (L.) Moench In Vitro

The global industrial revolution has led to a substantial rise in heavy metal levels in the environment, posing a serious threat to nature. Plants synthesize phenolic compounds under stressful conditions, which serve as protective agents against oxidative stress. Basilicum polystachyon (L.) Moench is an herbaceous plant of the Lamiaceae family. Some species within this family are recognized for their capacity to remediate sites contaminated with heavy metals. In this study, the effects of mercury (II) chloride and lead (II) nitrate on the in vitro propagation of B. polystachyon were investigated. Shoot tips from in vitro plantlets were cultured in Murashige and Skoog's (MS) media with heavy metals ranging from 1 to 200 µM to induce abiotic stress and enhance the accumulation of phenolic compounds. After three weeks, MS medium with 1 µM of lead (II) supported the highest shoot multiplication, and the maximum number of roots per explant was found in 100 µM of lead (II), whereas a higher concentration of heavy metals inhibited shoot multiplication and root development. The plantlets were hardened in a greenhouse with a 96% field survival rate. Flame atomic absorption spectroscopy (FAAS) was used to detect heavy metal contents in plant biomass. At both 200 µM and 50 µM concentrations, the greatest accumulation of mercury (II) was observed in the roots (16.94 ± 0.44 µg/g) and shoots (17.71 ± 0.66 µg/g), respectively. Similarly, lead (II) showed the highest accumulation in roots (17.10 ± 0.54 µg/g) and shoots (7.78 ± 0.26 µg/g) at 200 µM and 50 µM exposures, respectively. Reverse-phase high-performance liquid chromatography (RP-HPLC) identified and quantified various phenolic compounds in B. polystachyon leaves, including gallic acid, caffeic acid, vanillic acid, p-coumaric acid, ellagic acid, rosmarinic acid, and trans-cinnamic acid. These compounds were found in different forms, such as free, esterified, and glycosylated. Mercury (II)-exposed plants exhibited elevated levels of vanillic acid (1959.1 ± 3.66 µg/g DW), ellagic acid (213.55 ± 2.11 µg/g DW), and rosmarinic acid (187.72 ± 1.22 µg/g DW). Conversely, lead (II)-exposed plants accumulated higher levels of caffeic acid (42.53±0.61 µg/g DW) and p-coumaric acid (8.04 ± 0.31 µg/g DW). Trans-cinnamic acid was the predominant phenolic compound in control plants, with a concentration of 207.74 ± 1.45 µg/g DW. These results suggest that sublethal doses of heavy metals can act as abiotic elicitors, enhancing the production of phenolic compounds in B. polystachyon. The present work has the potential to open up new commercial opportunities in the pharmaceutical industry.

Photocatalytic oxidation of Reactive Red 195 by bimetallic Fe-Co catalyst: Statistical modeling and optimization via Box-Behnken design

Response surface methodology (RSM) is an effective tool for process optimization with multi-complex operational factors. The present work aims to model and optimize the photocatalytic oxidation (PCO) parameters of Reactive Red 195 (RR195) dye decoloration with the SiO2-supported Fe-Co catalyst (FCS) derived from a novel catalyst synthesis method, fluidized-bed crystallization (FBC) process, using Box-Behnken design (BBD) as the RSM statistical model. The Fe-Co@SiO2 catalyst was successfully fabricated using the FBC process, and it showed good catalytic activity and performance toward the degradation of RR195. The extent of the effects of pH, H2O2 dosage (HD), catalyst loading (CL), and operating time (t) on the decoloration of RR195 was studied. Hence, the order of variable significance follows the sequence: pH > t > CL > HD. pH has the most significant effect among the variables for RR195 decoloration. The decoloration efficiency predicted by the BBD model was 88.3% under the optimized operation conditions of initial pH of 3.15, 0.76 mM H2O2, 1.18 g L-1 FCS and 59.4 min of operating time. The actual decoloration efficiency was very close to the predicted value indicating that BBD can efficiently be utilized to optimize RR195 degradation with FCS under the PCO system.

Abscisic acid alleviates mercury toxicity in wheat (Triticum aestivum L.) by promoting cell wall formation

Mercury (Hg) is a heavy metal (HM) that affects crop growth and productivity. In a previous study, we found that application of exogenous abscisic acid (ABA) alleviated growth inhibition in Hg-stressed wheat seedlings. However, the physiological and molecular mechanisms underlying ABA-mediated Hg detoxification remained unclear. In this study, Hg exposure reduced the plant fresh and dry weights and root numbers. Exogenous ABA treatment significantly resumed the plant growth, increased the plant height and weight, and enriched the roots numbers and biomass. The application of ABA enhanced Hg absorption and raised the Hg levels in the roots. In addition, exogenous ABA decreased Hg-induced oxidative damage and significantly brought down the activities of antioxidant enzymes, such as SOD, POD and CAT. Global gene expression patterns in the roots and leaves exposed to HgCl₂ and ABA treatments were examined via RNA-Seq. The data showed that genes related to ABA-mediated Hg detoxification were enriched in functions related to cell wall formation. Weighted gene co-expression network analysis (WGCNA) further indicated that the genes implicated in Hg detoxification were related to cell wall synthesis. Under Hg stress, ABA significantly induced expression of the genes encoding cell wall synthesis enzymes, regulated the activity of hydrolase, and increased the concentrations of cellulose and hemicellulose, hence promoting cell wall synthesis. Taken together, these results suggest that exogenous ABA could alleviate Hg toxicity in wheat by promoting cell wall formation and suppressing translocation of Hg from roots to shoots.

Application of magnetic carbon nanocomposite from agro-waste for the removal of pollutants from water and wastewater

Water pollution has significant impact on water usage, and various contaminants, such as organic and inorganic compounds, heavy metals, dyes, pharmaceuticals compounds, pathogens and radioactive compounds, are implicated. The quest for globalisation, structural developments and other related anthropogenic activities promote the release of contaminants that induce water pollution. Hence, treatment and remediation options that can remove pollutants from watercourses and wastewater have been developed. Applied nanotechnology using carbon nanocomposites has recently drawn attention because it has the advantages of low preparation cost, high surface area, pore volume and environmental stability. Magnetic carbon nanocomposites usually exhibit excellent performance in adsorbing contaminants from aqueous solutions, and thus expanding the use of nanotechnology in water treatment is of great importance. Therefore, this review explores the geographical outlook of water pollution, sources of water pollution and types of contaminants found in water and discusses the use of carbon nanocomposites as an emerging sustainable technology for water pollutant removal. The various properties of carbon-based composites influence the extent of pollutant adsorption during water treatment processes. Most carbon-based nanocomposites are generated from biomass produced by agro-waste materials. Magnetic activated carbon nanocomposites produced from walnut shells and rice husk waste can remove 78% of Cd(II) from contaminated aqueous systems. Magnetic nanocomposites from peanut shell, tea waste, curcumin nanoparticles, sunflower head waste, rice husk, hydrophyte biomass, palm waste and sugarcane bagasse facilitate hydrothermal carbonisation, chemical precipitation, co-precipitation, chemical activation, calcination and fast pyrolysis. These nanocomposites have benefitted wastewater treatment by increasing efficiency in removing pharmaceutical, dye and organic contaminants, such as promazine, ciprofloxacin, amoxicillin, rhodamine 6G, methyl blue, phenol and phenanthrene. Hence, this review discusses the relatively low costs, good biocompatibility, large surface-to-volume ratio, magnetic separation capability and reusability carbon materials and highlights the advantages of using magnetic carbon nanocomposites in the removal of contaminants from water or wastewater through adsorption mechanisms.

Synergistic action of laccase treatment and membrane filtration during removal of azo dyes in an enzymatic membrane reactor upgraded with electrospun fibers

Nowadays, the increasing amounts of dyes present in wastewaters and even water bodies is an emerging global problem. In this work we decided to fabricate new biosystems made of nanofiltration or ultrafiltration membranes combined with laccase entrapped between polystyrene electrospun fibers and apply them for decolorization of aqueous solutions of three azo dyes, C.I. Acid Yellow 23 (AY23), C.I. Direct Blue 71 (DB71) and C.I. Reactive Black 5 (RB5). Besides effective decolorization of the permeate stream, the biosystems also allowed removal of dyes from the retentate stream as a result of enzymatic action. The effect of pH and applied pressure on decolorization efficiencies was investigated, and pH 5 and pressure of 2 bar gave the highest removal efficiencies of 97% for AY23 and 100% for both DB71 and RB5 from permeate solutions while decolorization of retentate for RB5 reached 65% under these conditions. Almost 100% decolorization of all dyes was achieved after three consecutive enzyme membrane cycles. Decolorization was shown to be due to the synergistic action of membrane separation and bioconversion. The biocatalytic action also enabled significant reduction of permeate and retentate toxicity, which is one of the biggest environmental health issues for these types of streams.

Remediation of Chromium (VI) from Groundwater by Metal-Based Biochar under Anaerobic Conditions

Iron salt-modified biochar has been widely used to remove Cr(VI) pollution due to the combination of the generated iron oxides and biochar, which can bring positive charge and rich redox activity. However, there are few comprehensive studies on the methods of modifying biochar with different iron salts. In this study, two iron salt (FeCl3 and Fe(NO3)3) modification methods were used to prepare two Fe-modified biochar materials for removing Cr(VI) in simulated groundwater environment. It was revealed by systematic characterization that FeCl3@BC prepared via the FeCl3 modification method, has larger pore size, higher zeta potential and iron oxide content, and has higher Cr(VI) adsorption-reduction performance efficiency as compared to Fe(NO3)3@BC prepared via Fe(NO3)3 modification method. Combined with XRD and XPS analyses, Fe3O4 is the key active component for the reduction of Cr(VI) to Cr(III). The experimental results have shown that acidic conditions promoted Cr(VI) removal, while competing ions (SO42− and PO43−) inhibited Cr(VI) removal by FeCl3@BC. The Elovich model and intra-particle diffusion model of FeCl3@BC can describe the adsorption behavior of Cr(VI) well, indicating that both the high activation energy adsorption process and intra-particle diffusion control the removal process of Cr(VI). The Freundlich model (R2 > 0.999) indicated that there were unevenly distributed chemisorptions centers on the FeCl3@BC surface. Stability experiments exposed that FeCl3@BC was stable under neutral, acidic, and alkaline conditions. Furthermore, the main mechanisms of FeCl3@BC removal of Cr(VI) include electrostatic adsorption, chemical reduction, ion exchange, and co-precipitation. In conclusion, our findings provide a new insight for the selection of iron salt-modified biochar methods, and will also be beneficial for the preparation of more efficient Fe-modified biochars in the future.

A critical review on the treatment of dye-containing wastewater: Ecotoxicological and health concerns of textile dyes and possible remediation approaches for environmental safety

The synthetic dyes used in the textile industry pollute a large amount of water. Textile dyes do not bind tightly to the fabric and are discharged as effluent into the aquatic environment. As a result, the continuous discharge of wastewater from a large number of textile industries without prior treatment has significant negative consequences on the environment and human health. Textile dyes contaminate aquatic habitats and have the potential to be toxic to aquatic organisms, which may enter the food chain. This review will discuss the effects of textile dyes on water bodies, aquatic flora, and human health. Textile dyes degrade the esthetic quality of bodies of water by increasing biochemical and chemical oxygen demand, impairing photosynthesis, inhibiting plant growth, entering the food chain, providing recalcitrance and bioaccumulation, and potentially promoting toxicity, mutagenicity, and carcinogenicity. Therefore, dye-containing wastewater should be effectively treated using eco-friendly technologies to avoid negative effects on the environment, human health, and natural water resources. This review compares the most recent technologies which are commonly used to remove dye from textile wastewater, with a focus on the advantages and drawbacks of these various approaches. This review is expected to spark great interest among the research community who wish to combat the widespread risk of toxic organic pollutants generated by the textile industries.

Toward efficient dye degradation and the bactericidal behavior of Mo-doped La2O3 nanostructures

In this study, different concentrations (0, 0.02, 0.04, and 0.06 wt%) of Mo doped onto La2O3 nanostructures were synthesized using a one-pot co-precipitation process. The aim was to study the ability of Mo-doped La2O3 samples to degrade toxic methylene blue dye in different pH media. The bactericidal potential of synthesized samples was also investigated. The structural properties of prepared samples were examined by XRD. The observed XRD spectrum of La2O3 showed a cubic and hexagonal structure, while no change was recorded in Mo-doped La2O3 samples. Doping with Mo improved the crystallinity of the samples. UV-Vis spectrophotometry and density functional theory calculations were used to assess the optical characteristics of Mo-La2O3. The band gap energy was reduced while the absorption spectra showed prominent peaks due to Mo doping. The HR-TEM results revealed the rod-like morphology of La2O3. The rod-like network appeared to become dense upon doping. A significant degradation of MB was confirmed with Mo; furthermore, the bactericidal activities against S. aureus and E. coli were measured as 5.05 mm and 5.45 mm inhibition zones, respectively, after doping with a high concentration (6%) of Mo.

A systematic review on iron-based nanoparticle-mediated clean-up of textile dyes: challenges and prospects of scale-up technologies

The projected increase of the global textile industry to USD1002.84 billion in 2027 indicates a simultaneous increase in water pollution due to textile dye-rich voluminous effluents highlighting the requirement of source clean-up. This review analyzes the colossal amount of literature on lab-scale nanoremediation technologies involving iron-based nanoparticles and the mechanistic aspects. However, not many studies are in place with regard to execution because there are several bottlenecks in the scale-up of the technology. This review attempts to identify the limitations of scale-up by focusing on each step of nanoremediation from synthesis of iron-based nanoparticles to their applications. The most prominent appears to be the low economic viability of physico-chemical synthesis of nanoparticles, lack of appropriate toxicity studies of iron-based nanoparticles, and dearth of studies on field applications. It is recommended that above studies should be made not only on lab scale but also on field samples preferably utilizing microbial products based green synthesized iron-based nanoparticles and conducting toxicity studies. Besides, immobilization of the nanoparticles on renewable material greatly enhances the sustainability and economic value of the process. Furthermore, since the chemical composition of dye-rich effluents varies among industries, effluent specific optimization of process parameters and kinetics thereof is also a major prerequisite for scale-up. The value of this review lies in the fact that it brings, for the first time, a comprehensive and critical systematization of various aspects needing attention in order to scale-up such effective nanoremediation processes.

Biosorption potential of Phoenix dactylifera coir wastes for toxic hexavalent chromium sequestration

Valorization of waste phytomass into valuable components provide new functionality to these biowastes and annul problems associated with their safe disposal. In this study, date palm (Phoenix dactylifera) coir (DPC) waste was tested for its toxic hexavalent chromium (Cr(VI)) ions biosorption. The DPC biosorbent was subjected to SEM, EDX, FTIR, TGA and N₂ adsorption/desorption characterization studies. Results showed that the cellulose-rich DPC surface contained mesopores with a wide number of functional groups and possessed suitable surface attributes for Cr(VI) ions sequestration. Batch biosorption tests established the Cr(VI) ions sequestration potential of the DPC biosorbent with a maximum chromium removal efficiency of 87.2% for a 100 ppm initial feed concentration at pH 2, dosage 0.3 g, temperature 30 °C, contact time 60 min and agitation speed 100 rpm. Langmuir isotherm fitted well (R² = 0.9955) with the experimental data while the kinetic analysis showed that Cr(VI) ions sequestration by DPC followed the pseudo-second order model. Biosorption thermodynamics revealed the exothermic nature and low-temperature preference for the effective binding of chromium ions on DPC. Regeneration of the biosorbent using NaOH wash showed a nearly steady Cr(VI) ions removal efficiency (with a loss <10%) by the DPC till four recycle runs. Economic analysis showed a very low production cost of $1.09/kg for the DPC biosorbent with a total cost of $4.36/m³ for a scale-up batch process wastewater treatment plant. Thus, a low-cost, effectual and sustainable biosorbent for effective treatment of Cr(VI) ions polluted water streams has been reported.

A critical review on advances in the practices and perspectives for the treatment of dye industry wastewater

Rapid industrialization has provided comforts to mankind but has also impacted the environment harmfully. There has been severe increase in the pollution due to several industries, in particular due to dye industry, which generate huge quantities of wastewater containing hazardous chemicals. Although tremendous developments have taken place for the treatment and management of such wastewater through chemical or biological processes, there is an emerging shift in the approach, with focus shifting on resource recovery from such wastewater and also their management in sustainable manner. This review article aims to present and discuss the most advanced and state-of-art technical and scientific developments about the treatment of dye industry wastewater, which include advanced oxidation process, membrane filtration technique, microbial technologies, bio-electrochemical degradation, photocatalytic degradation, etc. Among these technologies, microbial degradation seems highly promising for resource recovery and sustainability and has been discussed in detail as a promising approach. This paper also covers the challenges and future perspectives in this field.

Augmented Biodegradation of Textile Azo Dye Effluents by Plant Endophytes: A Sustainable, Eco-Friendly Alternative

Textile industry consumes a large proportion of available water and releases huge amounts of toxic azo dye effluents, leading to an inevitable situation of acute environmental pollution that has been a significant threat to mankind. Decolorization or detoxification of harmful azo dyes has become a global priority to overcome the disastrous consequences and salvage the ecosystem. Biodegradation of textile azo dyes by endophytes stands to be a lucrative and viable alternative over conventional physico-chemical methods, owing to their eco-friendliness, cost-competitive and non-toxic nature. Especially, plant endophytic microbes exhibit promising biodegradation potential which has wired up the effective removal of textile azo dyes, attributing to their ability to produce dye degrading enzymes, laccases, peroxidases and azoreductases. Although both bacterial and fungal endophytes have been tried for azo dye degradation, endophytic fungi find broader application over bacteria. Despite of the advancements made in microbe-mediated biodegradation, there is still a need to fill the gap in lab to in situ translation of biodegradation research. This review concisely accentuates the xenobiotics of textile azo dyes and microbial mechanisms of biodegradation of textile azo dyes, positing plant endophytic community, especially bacterial and fungal endophytes as the potential dye degraders, highlighting currently reported dye degrading endophytic species.

Reusability of brilliant green dye contaminated wastewater using corncob biochar and Brevibacillus parabrevis: hybrid treatment and kinetic studies

This work highlights the potential of corncob biochar (CCBC) and Brevibacillus parabrevis for the decolorization of brilliant green (BG) dye from synthetically prepared contaminated wastewater. The CCBC was characterized by proximate, Fourier-transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction, and Brunauer-Emmett-Teller analysis, respectively. Different parameters affecting the adsorption process were evaluated. The experimental results were analyzed by the Langmuir and Freundlich isotherm models. Kinetic results were examined by different models; pseudo-second-order model has shown the best fit to the experimental data. Anew positive values of ΔH^o (172.58 kJ/mol) and ΔS^o (569.97 J/K/mol) in the temperature range of 303-318 K revealed that the adsorption process was spontaneous and endothermic. The present investigation showed that the bacteria immobilized with CCBC showed better BG dye degradation. The kinetic parameters, μ_max, Ks, and μ _max, were found to be 0.5 per day, 39.4 mg/day, and 0.012 L/mg/day using Monod model, respectively. The adsorbent with bacteria showed good potential for the removal of cationic BG dye and can be considered for the remediation of industrial effluent.

Valorization of Crataegus azarolus stones for the removal of textile anionic dye by central composite rotatable design using cubic model: optimization, isotherm, and kinetic studies

In this study, the central composite rotatable design (CCRD) was used in the optimization of the operating parameters for the removal of the direct blue 86 (DB86), an anionic dye, because of its hazardous impact on human health and aquatic environment. In addition, DB86 is a recalcitrant and non-biodegradable dye whose presence considerably inhibits photosynthesis. Its removal in aqueous medium was achieved by biosorption onto the novel biosorbent Crataegus azarolus stones (CAS). The parameters like the solution pH, biosorbent dose, initial DB86 concentration, and temperature were studied in the ranges 2-6, 0.8-4 g L^-1, 20-100 mg L^-1, and 10-50 °C, respectively. The significance of the experimental parameters and their interactions was investigated by the Student's t test and p values with 5% error limits using JMP 11.0.0 software. The regression analysis of the experimental data obtained from 31 batch runs provides a cubic model. The optimum conditions obtained for the maximum DB86 elimination from the synthetic solution were found to be pH 2, biosorbent dose of 4 g L^-1, initial DB86 concentration of 20 mg L^-1, and temperature of 10 °C, leading to a theoretical maximum removal of 123%. The experimental data were analyzed by the Langmuir, Freundlich, and Temkin equilibrium models. The Langmuir isotherm gave the best fit with a maximum biosorption capacity of 24.02 mg g^-1. The results of the kinetic study revealed that the biosorption kinetic of DB86 follows a pseudo-second-order model. All results confirmed that CAS are an efficient, economic, and ecological alternative for the treatment of industrial wastewaters loaded with anionic dyes.

Ecological and agriculture impacts of bakery yeast wastewater use on weed communities and crops in an arid environment

The goal of this study was to evaluate the impact of using yeast wastewater (YW) on weed communities. The study showed that all ecological parameters including species richness, dispersion, density, frequency, and % of vegetation cover were significantly increased in the site irrigated with YW compared to a natural rain fed site and another site irrigated with fresh water. The vegetation cover (%) was significantly increased by 2-folds in the site irrigated with YW (52%) than the one irrigated with fresh water (27%). Species richness increases to 23 in the site irrigated with yeast wastewater compared to 12 species in natural rain fed site and 7 species in areas irrigated with fresh water. The 10 studied weed species germinated better at 10 and 20% dilutions of baker's YW. However, only five species achieved few germination (3-25%) at 50% of YW and the two species Sisymbrim irio and Cardariia droba achieved (6-13%) germination using 100% YW. No germination occurred for the crop seeds (tomato, squash, lentil, and barley) at 50 and 100% YW. For tomato, 10 and 20% of YW achieved better germination (82 and 63%, respectively) than the seeds of other species, followed by barley with 80 and 53% of germination. Squash showed the lowest germination percentage with 59 and 42% at 10 and 20% of YW, respectively. Yeast wastewater seems to be crop specific and can affect weed species composition and relative abundances and care should be taken before using the effluent for irrigation of tree plantations and crops.

Photocatalytic degradation of pentachlorophenol by visible light Ν-F-TiO₂ in the presence of oxalate ions: optimization, modeling, and scavenging studies

The efficiency of heterogeneous photocatalysis using N-F-TiO2 as photocatalyst to degrade a priority pollutant, pentachlorophenol (PCP), in the presence of oxalates (OA) was investigated in detail. Response surface methodology was used to optimize the effect of three variables (catalyst concentration, OA/PCP ratio, and pH) on the photocatalytic degradation of pentachlorophenol. A quadratic model was established as a functional relationship between three independent variables and the degradation efficiency of PCP. The results of model fitting and statistical analysis demonstrated that the pH played a key role in the degradation of PCP. Within the studied experimental ranges, the optimum conditions for maximum PCP degradation efficiency (97.5 %) were: catalyst concentration 600 mg L(-1), OA/PCP ratio 2, and pH 10. The contribution of HO(·), O2 (·-), and e(-) produced during the photocatalytic treatment was investigated with the addition of scavengers. The photocatalytic degradation was essentially proceeded through an oxidative mechanism at both acid and alkaline pH values by HO(.) and O2 (·-) radicals attack. It was found that O2 (·-) were the major reactive species involved in PCP degradation in pH 4 and HO(·) in pH 10.