Natural and organo-montmorillonite as antibacterial nanoclays for cotton garment

Plasmonic photocatalytic nanocomposite of in-situ synthesized MnO2 nanoparticles on cellulosic fabric with structural color

The textile industry produces 20 % of the industrial water pollution containing toxic substances mostly dyes. Reducing material consumption and developing more efficient and scalable textile waste-water treatment methods such as photocatalytic degradation is essential. In this work, manganese dioxide nanoparticles (MnO2 NPs) were synthesized on the cotton fabric via a facile in-situ process. The preparation process was optimized for the highest photocatalytic activity under sunlight and color change originating from the plasmonic structural color of the nanoparticles. This promotes the photocatalytic activity by delocalization of the hot electrons while demonstrating the best washing and light fastness by using the least chemicals, and energy in a short time. In this way, the fabric was colored without any dye and possessed robust photocatalytic activity. Further, no dye-containing waste-water is made, and also accomplished to degrade dyes in a few hours under sunlight which is substantial for sustainable development. The treated fabrics indicated favorable mechanical properties, enhanced thermal stability, and perfect biocompatibility.

Potential of montmorillonite modified by an organosulfur surfactant for reducing aflatoxin B1 toxicity and ruminal methanogenesis in vitro

Background

Montmorillonite clay modified by organosulfur surfactants possesses high cation exchange capacity (CEC) and adsorption capacity than their unmodified form (UM), therefore they may elevate the adverse impact of aflatoxin B1 (AFB1) on ruminal fermentation and methanogenesis. Chemical and mechanical modifications were used to innovate the organically modified nano montmorillonite (MNM). The UM was modified using sodium dodecyl sulfate (SDS) and grounded to obtain the nanoscale particle size form. The dose-response effects of the MNM supplementation to a basal diet contaminated or not with AFB1 (20 ppb) were evaluated in vitro using the gas production (GP) system. The following treatments were tested: control (basal diet without supplementations), UM diet [UM supplemented at 5000 mg /kg dry matter (DM)], and MNM diets at low (500 mg/ kg DM) and high doses (1000 mg/ kg DM).

Results

Results of the Fourier Transform Infra-Red Spectroscopy analysis showed shifts of bands of the OH-group occurred from lower frequencies to higher frequencies in MNM, also an extra band at the lower frequency range only appeared in MNM compared to UM. Increasing the dose of the MNM resulted in linear and quadratic decreasing effects (P < 0.05) on GP and pH values. Diets supplemented with the low dose of MNM either with or without AFB1 supplementation resulted in lower (P = 0.015) methane (CH₄) production, ruminal pH (P = 0.002), and ammonia concentration (P = 0.002) compared to the control with AFB1. Neither the treatments nor the AFB1 addition affected the organic matter or natural detergent fiber degradability. Contamination of AFB1 reduced (P = 0.032) CH₄ production, while increased (P < 0.05) the ruminal pH and ammonia concentrations. Quadratic increases (P = 0.012) in total short-chain fatty acids and propionate by MNM supplementations were observed.

Conclusion

These results highlighted the positive effects of MNM on reducing the adverse effects of AFB1 contaminated diets with a recommended dose of 500 mg/ kg DM under the conditions of this study.

Effects of Montmorillonite and Gentamicin Addition on the Properties of Electrospun Polycaprolactone Fibers

Electrospinning was used to obtain multifunctional fibrous composite materials with a matrix of poly-ɛ-caprolactone (PCL) and 2 wt.% addition of a nanofiller: montmorillonite (MMT), montmorillonite intercalated with gentamicin sulphate (MMTG) or gentamicin sulphate (G). In the first stage, the aluminosilicate gallery was modified by introducing gentamicin sulfate into it, and the effectiveness of the intercalation process was confirmed on the basis of changes in the clay particle size from 0.5 µm (for MMT) to 0.8 µm (for MMTG), an increase in the interplanar distance d₀₀₁ from 12.3 Å (for MMT) to 13.9 Å (for MMTG) and altered clay grain morphology. In the second part of the experiment, the electrospinning process was carried out in which the polymer nonwovens with and without the modifier were prepared directly from dichloromethane (DCM) and N,N-dimethylformamide (DMF). The nanocomposite fibrous membranes containing montmorillonite were prepared from the same polymer solution but after homogenization with the modifier (13 wt.%). The degree of dispersion of the modifier was evaluated by average microarray analysis from observed area (EDS), which was also used to determine the intercalation of montmorillonite with gentamicin sulfate. An increase in the size of the fibers was found for the materials with the presence of the modifier, with the largest diameters measured for PCL_MMT (625 nm), and the smaller ones for PCL_MMTG (578 nm) and PCL_G (512 nm). The dispersion of MMT and MMTG in the PCL fibers was also confirmed by indirect studies such as change in mechanical properties of the nonwovens membrane, where the neat PCL nonwoven was used as a reference material. The addition of the modifier reduced the contact angle of PCL nonwovens (from 120° for PCL to 96° for PCL_G and 98° for PCL_MMTG). An approximately 10% increase in tensile strength of the nonwoven fabric with the addition of MMT compared to the neat PCL nonwoven fabric was also observed. The results of microbiological tests showed antibacterial activity of all obtained materials; however, the inhibition zones were the highest for the materials containing gentamicin sulphate, and the release time of the active substance was significantly extended for the materials with the addition of montmorillonite containing the antibiotic. The results clearly show that the electrospinning technique can be effectively used to obtain nanobiocomposite fibers with the addition of nonintercalated and intercalated montmorillonite with improved strength and increased stiffness compared to materials made only of the polymer fibers, provided that a high filler dispersion in the spinning solution is obtained.

Modified Nano-Montmorillonite and Monensin Modulate In Vitro Ruminal Fermentation, Nutrient Degradability, and Methanogenesis Differently

Two types of modified nano-montmorillonite (MNM) were developed by ion-exchange reactions using two different surfactants; sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CETAB), to prepare MNM_SDS and MNM_CETAB, respectively. Both MNM types were on the nano-scale and had higher cation-exchange capacity values than NM clay. The MNM_CETAB had the highest zeta potential (-27 mV) compared with the other clays. Effects of MNM types on in vitro ruminal batch culture fermentation, nutrient degradability, and methane (CH₄) emission compared with monensin were evaluated in vitro using a semi-automatic gas production system. The experimental treatments were the control (0 supplementations), monensin (40 mg/kg DM), and NM (5 g NM/kg DM), and two levels of MNM_SDS and MNM_CETAB were supplemented at 0.05 (low) and 0.5 (high) g/kg DM to the control basal feed substrate. Among the experimental treatments, the high dose of both MNM types reduced (p < 0.01) CH₄ production and ammonia concentrations compared with the control, while only MNM_CETAB treatment tended to increase (p = 0.08) the truly degraded organic matter compared with monensin. All MNM treatments increased (p < 0.01) acetate molar proportions compared with monensin. The high MNM_CETAB increased (p < 0.01) the in vitro ruminal batch culture pH compared with the control and monensin. The MNM_CETAB supplemented at 0.5 g/kg DM is the most efficient additive to reduce CH₄ emission with the advantage of enhancing the in vitro nutrient degradability of the experimental feed substrate. These results indicated that MNM could modulate the in vitro ruminal fermentation pattern in a dose- and type-dependent manner.

Investigation on Atomic Structure and Mechanical Property of Na- and Mg-Montmorillonite under High Pressure by First-Principles Calculations

Montmorillonite is an important layered phyllosilicate material with many useful physicochemical and mechanical properties, which is widely used in medicine, environmental protection, construction industry, and other fields. In order to a get better understanding of the behavior of montmorillonite under high pressure, we studied its atomic structure, electronic and mechanical properties using density functional theory (DFT), including dispersion corrections, as function of the interlayer Na and Mg cations. At ideal condition, the calculations of lattice constants, bond length, band structure, and elastic modulus of Na- and Mg-montmorillonite are in good agreement with the experimental values. Under high pressure, the lattice constants and major bond lengths decreased with increasing pressure. The calculated electronic properties and band structure show only a slight change under 20 GPa, indicating that the effect of pressure on the electronic properties of Na- and Mg-montmorillonite is weak. The bulk modulus, shear modulus, Young’s modulus, shear wave velocity and compression wave velocity of Na- and Mg-montmorillonite are positively correlated with the external pressure, and the other mechanical parameters have a little change. The calculated studies will be useful to explore experiments in the future from a purely scientific point of view.

Electrospinning of Scaffolds from the Polycaprolactone/Polyurethane Composite with Graphene Oxide for Skin Tissue Engineering

Creating scaffolds for skin tissue engineering remain challenging in terms of their mechanical and biological properties. In this paper, we present a study on the nanocomposite polyurethane (PU)/polycaprolactone (PCL) scaffolds with graphene oxide (GO), which were fabricated by using electrospinning method, for potential skin tissue engineering. For this, homogenous and soft PU nanofibers containing varying percent of polycaprolactone (12% and 15%) and nano GO (0.5-4%) were electrospun, respectively, and then characterized by different techniques/assays in vitro. For the scaffold characterization, scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) were used. The SEM results show the spun scaffolds have 3D porous structure (90%) with the fiber diameter increased with the GO concentration, while the FTIR results confirmed the presence of PU, PCL, and Go in the scaffolds. Also, the biocompatibility, via the cytotoxicity, of the scaffolds was examined by MTT assay with the human skin fibroblast cells, along with their wettability in terms of contact angle. Our results show that the scaffolds are biocompatible to the skin fibroblast cell, illustrating their potential use in skin tissue engineering. Also, our results illustrate that the addition of GO to the PU/PCL composite can increase the wettability (or hydrophilicity) and biocompatibility of scaffolds. Combined together, the nanocomposite PU/PCL scaffolds with GO are promising as biocompatible constructs for skin tissue engineering.

Curcumin-loaded electrospun polycaprolactone/montmorillonite nanocomposite: wound dressing application with anti-bacterial and low cell toxicity properties

Materials and scaffolds with antimicrobial properties are of great importance in wound dressing and other tissue engineering applications. The objective of the present work was to fabricate scaffolds made from nanocomposites of polycaprolactone (PCL) and quaternary ammonium salt-modified montmorillonite (MMT) by the electrospinning technique, and then characterize their antimicrobial and other properties for wound dressing applications. The effect of MMT on the structure, morphology, and thermal behavior of the electrospun wound dressings was assessed by means of X-ray diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM); the swelling capacity, antibacterial activity, and cytotoxicity were also evaluated. The results of XRD and SEM analyses showed MMT was successfully incorporated into the PCL polymeric matrix and its inclusion reduced the size and thickness of the electrospun fibers compared to pure PCL fibers. The TGA results illustrated an increase in the thermal stability of nanocomposites upon incorporation of nanoclay into the PCL matrix. The swelling capacity of the wound dressings was reduced by increasing the amount of MMT in the PCL matrix due to the increased hydrophobicity of the original MMT resulting from its modification with quaternary ammonium salt. The in vitro curcumin (Cur) release profile revealed an initial burst release followed by a sustained release, with the burst release level reduced by the introduction of MMT into the polymeric matrix. Increasing the nanoclay content further reduced the curcumin release, with the PCL/20% MMT/Cur dressings having the lowest curcumin release of all those tested. The beneficial effect of MMT on the antibacterial behavior of electrospun wound dressings based on PCL/MMT nanocomposites was confirmed, with the introduction of both MMT and curcumin into the PCL matrix resulting in lower bacterial viability. PCL/10% MMT/Cur demonstrated higher antimicrobial activity and the greatest bacterial colony reduction compared to both pure PCL and PCL/10% MMT. The cytotoxicity evaluation indicated low toxicity and confirmed the potential of PCL/MMT nanocomposite scaffolds for wound dressing applications.

Current Highlights About the Safety of Inorganic Nanomaterials in Healthcare

:

In recent years inorganic materials are largely present in products intended for health care. Literature gives many examples of inorganic materials used in many healthcare products, mainly in pharmaceutical field.

:

Silver, zinc oxide, titanium oxide, iron oxide, gold, mesoporous silica, hydrotalcite-like compound and nanoclays are the most common inorganic materials used in nanosized form for different applications in the health field. Generally, these materials are employed to realize formulations for systemic use, often with the aim to perform a specific targeting to the pathological site. The nanometric dimensions are often preferred to obtain the cellular internalization when the target is localized in the intracellular space.

:

Some materials are frequently used in topical formulations as rheological agents, adsorbents, mattifying agents, physical sunscreen (e.g. zinc oxide, titanium dioxide), and others.

:

Recent studies highlighted that the use of nanosized inorganic materials can represent a risk for health. The very small dimension (nanometric) until a few years ago represented a fundamental requirement; however, it is currently held responsible for the inorganic material toxicity. This aspect is very important to be considered as actually numerous inorganic materials can be found in many products available in the market, often dedicated to infants and children. These materials are used without taking into account their dimensional properties with increased risk for the user/patient.

:

This review deals with a deep analysis of current researches documenting the toxicity of nanometric inorganic materials especially those largely used in products available in the market.

Cobalt and nickel bimetallic sulfide nanoparticles immobilized on montmorillonite demonstrating peroxidase-like activity for H2O2 detection

In this study, ternary transition metal sulfide (cobalt and nickel sulfides) nanoparticles were anchored on the surface of montmorillonite (MMT) by a facile one-pot hydrothermal method.

Application of Synthetic Layered Sodium Silicate Magadiite Nanosheets for Environmental Remediation of Methylene Blue Dye in Water

The removal of methylene blue (MB) dye from water was investigated using synthetic nano-clay magadiite (SNCM). SNCM was synthesized by a hydrothermal treatment under autogenous pressure. A rosette-shaped single mesoporous magadiite phase with 16.63 nm average crystallite size and 33 m²∙g⁻¹ Braunauer-Emmet-Teller (BET)-surface area was recorded. The adsorption results indicated the pronounced affinity of the SNCM to the MB dye molecules, which reached an adsorption uptake of 20.0 mg MB dye/g of SNCM. The elimination of MB dye by the SNCM was kinetically and thermodynamically considered; a pseudo-second-order kinetic model was attained, and its spontaneous, chemical, and endothermic nature was verified. SNCM was shown to be robust without a detectable reduction in the adsorption capacity after up to four times re-use.