Magnetically separable Au-TiO 2 /nanocube ZnFe 2 O 4 composite for chlortetracycline removal in wastewater under visible light

Novel cubical Ag(NP) decorated titanium dioxide supported bentonite thin film in the efficient removal of bisphenol A using visible light

The persistent endocrine-disrupting chemical bisphenol A is posing serious health concerns; hence, it is known to be an emerging and potential water contaminant. The present investigation aims to synthesize novel cubical Ag(NP) decorated titanium dioxide-supported bentonite (Ag/TiO₂@Clay) nanocomposite using a novel synthetic process. The nanocomposite materials were characterized by several analytical methods viz., transmission electron microscopy (TEM), X-ray diffraction (XRD) analyses, energy-dispersive X-ray spectroscopy (EDX), atomic force microscopy (AFM), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) and diffuse reflectance spectroscopy (DRS). Further, the photocatalytic removal of bisphenol A was conducted utilizing the thin film catalyst under the LED (light emitting diode; visible light) and UV-A (ultra violet-A) light sources. The parametric studies solution pH (6.0-12.0), pollutant concentrations (1.0-20.0 mg/L), and the interaction of several scavengers and co-existing ions are studied extensively to demonstrate the insights of the removal mechanism. The mineralization of bisphenol A and repeated use of the thin film catalyst showed the potential usage of photocatalysts in the devised large-scale operations. Similarly, the natural matrix treatment was performed to evaluate the suitability of the process for real implications.

Novel nanocomposite thin film in the efficient removal of antibiotics using visible light: Insights of photocatalytic reactions and stability of thin film in real water implications

Novel clay (bentonite) supported Ag⁰ nanoparticles (NPs) doped TiO₂ nanocomposite (Clay/TiO₂/Ag⁰(NPs)) thin film was obtained by using template synthesis method. The nanocomposite material is decorated with cubical Ag⁰(NPs) and utilised successfully in the photocatalytic degradation of tetracycline (TC) and sulfamethazine (SMZ) from aqueous solutions utilizing visible light and UV-A radiations. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS) analyses were used to characterise the nanocomposite materials. Diffusion reflectance spectroscopy (DRS) was utilised to determine the bandgap energies of the materials and also to confirm that Ag⁰(NPs) was successfully doped with TiO₂. The nanocomposite material showed highly efficient photocatalytic activity for the breaking down of TC/SMZ under visible light irradiation by the enhanced electron-hole separation and adsorption of antibiotics at the vicinity of the catalyst. The oxidative degradation of TC/SMZ were shown to be highly dependent on the pH, initial concentration of TC/SMZ, and various co-existing ions. Reusability test of Clay/Ag⁰(NPs)/TiO₂ nanocomposite revealed that the activity did not decline with repeated use. Treatment of TC and SMZ in real water system further enhanced the application potential of the novel catalysts for the treatment of full-scale wastewater polluted with these antibiotics.

Honeycomb-like MnO2/Biochar Catalyst Fabricated by High-Energy Electron Beam Irradiation for Degradation of Antibiotics in Swine Urine

The modification of biochar is essential for the development of multifunctional biochar materials with enhanced remediation effects on contaminated water. In this work, a biochar-based microcatalyst with sunlight sensitivity was synthesized by a creative modification method that involved the rapid fabrication of MnO₂ microspheres by high-energy electron beam (HEEB) irradiation, and loading them into corn straw-derived honeycomb-like KOH-modified biochar (MBC) to obtain a sunlight-sensitive microcatalyst (SSM). The honeycomb-like structure of MBC facilitated the improvement in MnO₂ dispersion and photocatalytic property through confinement effect. The effects of photocatalyst dosage, initial chlortetracycline (CTC) concentration, solution pH, temperature and coexisting ions on the photocatalytic performance of SSM were systemically investigated. The results indicated that SSM could efficiently degrade CTC in water and swine urine under sunlight, and exhibited high stability against coexistence of urea, Cl^- and SO₄^2-. Moreover, SSM showed good reusability in regeneration studies. This work provides a novel method for degrading CTC with potential application prospect.

Noble metal-doped TiO2 thin films in the efficient removal of Mordant Orange-1: insights of degradation process

Nanocomposite Ag⁰(NPs)/TiO₂ is synthesised in a facile template method enabling nanoparticles of reduced Ag evenly distributed within the titania network. The morphological studies of nanocomposites were extensively performed employing SEM/EDX (scanning electron microscopy/energy dispersive X-ray), TEM (transmission electron microscopy) and AFM (atomic force microscopy). Moreover, the bandgap energies of materials were obtained using the diffuse reflectance spectrometer (DRS). The newer insights in the photocatalytic elimination of Mordant Orange-1 (MO1) was obtained using the nanocomposite thin film for various parametric studies utilising the UV-A and LED illuminations. The kinetics of degradation of MO1 was performed, and the rate constant was favoured at lower concentrations of MO1. Moreover, the elimination efficiency of MO1 was favoured with a decrease in solution pH. The NPOC results inferred that a fairly good extent of MO1 was mineralised using a thin-film catalyst for both the UV-A and LED illuminations. The minimal effect of several co-ions demonstrated the applicability of thin films in the elimination of MO1, and the stability of the thin film has shown the potential applicability of thin-film catalysts. Further, the mechanism of photocatalytic degradation was demonstrated with the radical scavenger studies and ascertained the reaction pathways.

Application of Spinel and Hexagonal Ferrites in Heterogeneous Photocatalysis

Semiconducting materials display unique features that enable their use in a variety of applications, including self-cleaning surfaces, water purification systems, hydrogen generation, solar energy conversion, etc. However, one of the major issues is separation of the used materials from the process suspension. Therefore, chemical compounds with magnetic properties have been proposed as crucial components of photocatalytic composites, facilitating separation and recovery of photocatalysts under magnetic field conditions. This review paper presents the current state of knowledge on the application of spinel and hexagonal ferrites in heterogeneous photocatalysis. The first part focuses on the characterization of magnetic (nano)particles. The next section presents the literature findings on the single-phase magnetic photocatalyst. Finally, the current state of scientific knowledge on the wide variety of magnetic-photocatalytic composites is presented. A key aim of this review is to indicate that spinel and hexagonal ferrites are considered as an important element of heterogeneous photocatalytic systems and are responsible for the effective recycling of the photocatalytic materials.

Defective TiO2 Core-Shell Magnetic Photocatalyst Modified with Plasmonic Nanoparticles for Visible Light-Induced Photocatalytic Activity

In the presented work, for the first time, the metal-modified defective titanium(IV) oxide nanoparticles with well-defined titanium vacancies, was successfully obtained. Introducing platinum and copper nanoparticles (NPs) as surface modifiers of defective d-TiO2 significantly increased the photocatalytic activity in both UV-Vis and Vis light ranges. Moreover, metal NPs deposition on the magnetic core allowed for the effective separation and reuse of the nanometer-sized photocatalyst from the suspension after the treatment process. The obtained Fe3O4@SiO2/d-TiO2-Pt/Cu photocatalysts were characterized by X-ray diffractometry (XRD) and specific surface area (BET) measurements, UV-Vis diffuse reflectance spectroscopy (DR-UV/Vis), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). Further, the mechanism of phenol degradation and the role of four oxidative species (h+, e−, •OH, and •O2−) in the studied photocatalytic process were investigated.

Fabrication of a magnetic ternary ZnFe2O4/TiO2/RGO Z-scheme system with efficient photocatalytic activity and easy recyclability

A magnetic composite based on TiO2 nanosheets, ZnFe2O4 and reduced graphene oxide (RGO) was synthesized by a one-step hydrothermal synthesis method, which possessed the band structure of a Z-scheme photocatalytic system. The properties and structures of the samples were characterized by XRD, UV-Vis DRS, Raman spectroscopy, SEM, EDS, XPS and PL spectroscopy. Compared with TiO2 nanosheets and the TiO2/RGO composite, the obtained ternary composite with 3 wt% RGO exhibited a significant enhancement in photocatalytic activities, attributed to the efficient charge separation induced by the fabricated Z-scheme system. About 99.7% of p-nitrophenol (p-NP) degraded within 60 min under simulated solar irradiation. Trapping experiments showed that superoxide anions (˙O2 -) and hydroxyl radicals (˙OH) were the main active species in the p-NP photocatalytic degradation. Finally, a possible photocatalytic mechanism of Z-scheme ZnFe2O4/TiO2/RGO was proposed based on the results of trapping experiments and the energy bands of TiO2 and ZnFe2O4.

Performance optimization of CdS precipitated graphene oxide/polyacrylic acid composite for efficient photodegradation of chlortetracycline

Here a CdS embedded poly acrylic acid (PAA)/graphene oxide (GO) polymeric composite was prepared for the efficient degradation of chlortetracycline (CTC) driven by visible light irradiation. The structure-activity relationship of GO/PAA-CdS was confirmed through the photocatalytic evaluation of a series of samples prepared by varying GO concentration, molar ratio of Cd:S and the amount of crosslinking agent. Through the composition, morphology, photoelectrochemical characterizations and degradation kinetic studies, it could be confirmed that the enhanced photocatalytic activity is attributed to the controlled growth of CdS nanoparticles by polymer net structure and effective electron transfer along GO nanosheets. The photodegradation of CTC was confirmed to be mainly governed by O₂^- and OH radicals generated from GO/PAA-CdS. The degradation intermediates of CTC were confirmed by LC-MS, and possible degradation pathways were proposed based on the prediction of radical attacking sites according to Fukui function values obtained through Density Functional Theory (DFT). Moreover, it was found that the catalytic activity of the photocatalyst was maintained after several cycles confirming the enhanced anti-photocorrosion of GO/PAA-CdS. This research provided an efficient approach by a novel photocatalyst for the removal of CTC from wastewater.

One-Step Synthesis of Metal-Modified Nanomagnetic Materials and Their Application in the Removal of Chlortetracycline

Magnetic nanomaterials are promising heterogeneous catalysts for environmental applications. According to X-ray diffraction, Brunauer-Emmett-Teller method, scanning electron microscopy, high-resolution transmission electron microscopy, and vibrating-sample magnetometer, a kind of copper-modified nanomagnetic material (Cu-nFe₃O₄) was successfully prepared by a one-step synthesis method. Among them, compared with the two-step synthesis method of Cu/Fe₃O₄ and Cu/nFe₃O₄, Cu-nFe₃O₄ has the best effect on chlortetracycline (CTC) removal. The batch study results indicate that the maximum removal of chlortetracycline is 99.0% at a dosage = 2.0 g L^-1, copper loading = 0.8 mM, and C ₀ = 100 mg L^-1 at the optimum conditions within 90 min. The effects of humic acids (HA), NO₃ ^-, Cl^-, CO₃ ^2-, and PO₄ ^3- on the CTC removal by Cu-nFe₃O₄ are also investigated. Repeated experiments were performed on the prepared Cu-nFe₃O₄, indicating that Cu-nFe₃O₄ has good recyclability. The kinetics of the Cu-nFe₃O₄ removal of CTC was investigated, indicating that the reaction conformed to the double constant model and the reaction is mainly dominated by a chemical reaction with physical adsorption. Finally, the mechanism of the CTC removal by Cu-nFe₃O₄ in a heterogeneous environment was clarified. This study aims to provide an experimental basis for the environmental application of Cu-nFe₃O₄.

Removal of chlortetracycline by nano- micro-electrolysis materials: Application and mechanism

Nano micro-electrolysis materials (nMETs) have been used to degrade refractory pollutants in batch experiments. The reasonable formation mechanism of nMETs was given through DMXY digital biomicroscopy. Based on the kinetic data of Chlortetracycline (CTC) removal by nMETs in batch experiments, combined with the binomial distribution equation of CTC reduction by nano materials an experimental-scale fluidized bed (ESFB) was designed. The effects of CTC removal performance, pH and iron ion concentration were investigated. Under pure CTC solution environment, the experimental data showed that the average removal rates of CTC by nMET and nano micro-electrolysis material with loading copper (Cu-nMET) are 90.0% and 95.7% in ESFB, respectively. In the presence of nitrate, although the consumption of two kinds of nano-materials increased, their removal efficiencies of pollutants have 2.2%, 0.2% increase compared with the nitrate-free ESFB. At the same time, the CTC degradation pathway and the enhanced removal mechanism by Cu-nMET was proposed. Through microelectrolysis reaction, complexation reaction and the active substances produced, the intermediate products can be degraded completely to NH₄⁺, CO₂, H₂O and so on. This study aims to provide a theoretical basis for the environmental application of nMETs.

Modification of Immobilized Titanium Dioxide Nanostructures by Argon Plasma for Photocatalytic Removal of Organic Dyes

The aim of this study was to modify surface properties of immobilized rutile TiO₂ using Argon cold plasma treatment and to evaluate the performance of the catalyst in photocatalytic elimination of synthetic dyes in UV/TiO₂/H₂O₂ process. The surface-modified TiO₂ was characterized by XRD, EDX, SEM, UV-DRS and XPS analyses. Response surface methodology was adopted to achieve high catalyst efficiency by evaluating the effect of two main independent cold plasma treatment parameters (exposure time and pressure) on surface modification of the catalyst. The increase of the plasma operation pressure led to higher decolorization percentage, while the increase of plasma exposure time decreased the decolorization efficiency. RSM methodology predicted optimum plasma treatment conditions to be 0.78 Torr and 21 min of exposure time, which resulted in decolorization of 10 mg/L solution of the malachite green solution by 94.94% in 30 min. The plasma treatment decreased the oxygen to titanium ratio and caused oxygen vacancy on the surface of the catalyst, resulting in the superior performance of the plasma-treated catalyst. Pseudo first-order kinetic rate constant for the plasma-treated catalyst was 4.28 and 2.03 times higher than the rate constant for the non-treated photocatalyst in decolorization of aqueous solutions of malachite green and crystal violet, respectively.

Enhanced photocatalytic degradation of sulfamethoxazole by deposition of Au, Ag and Cu metallic nanoparticles on TiO2

Mono- (Au, Ag and Cu) and bi-metallic (Au-Ag and Au-Cu) nanoparticles were deposited on TiO₂ and tested for the photocatalytic degradation of sulfamethoxazole using either UV-C or simulated sunlight. The optimal loading of metallic nanoparticles was determined as 1.5 wt% for Au and Ag, and 1.0 wt% for Cu. In the case of bi-metallic nanoparticles, only the ratio 1:0.5 wt% for both Au-Ag and Au-Cu was tested. In experiments using UV-C light, the highest degradation performance was found for Ag/TiO₂, while bi-metallic nanoparticles supported on TiO₂ also showed increased photocatalytic activity compared with unmodified TiO₂. In simulated sunlight irradiation tests, Au/TiO₂ showed to be the most efficient material. Complete mineralization of sulfamethoxazole was achieved when surface-modified materials were tested in both UV-C and simulated sunlight experiments. Photolysis was efficient to fully degrade sulfamethoxazole, although mineralization was lower than 10% for both luminic sources. The main by-products of sulfamethoxazole were determined in photolysis and photocatalysis tests using UV-C light, and degradation paths were proposed. By-products showed non-toxicity and low antibiotic activity. Reuse of the catalysts upon three reaction cycles did not result in the loss of activity.

Nanocomposite thin films Ag0(NP)/TiO2 in the efficient removal of micro-pollutants from aqueous solutions: A case study of tetracycline and sulfamethoxazole removal

The aim of this communication is to synthesize novel Nanocomposite thin film materials (Ag⁰(NP)/TiO₂) using the template process. Surface morphology of materials was obtained by the Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) analyses. The presence of doped Ag-nanoparticles was confirmed by the TEM images along with the SEM-EDX analyses. The Atomic Force Microscopic images were demonstrated the surface roughness and thickness of Nanocomposite thin films. X-ray diffraction analysis confirmed that TiO₂ was predominantly present to its anatase mineral phase. The Fourier Transform Infra-red analysis conducted to obtain the functional groups present with the solid. The specific surface area and pore sizes of Nanocomposites were obtained by the BET (Brunauer, Emmett, and Teller) analysis. Further, the Nanocomposite thin film photocatalysts were successfully employed in the degradation of emerging micro-pollutants viz., the antibiotics tetracycline and sulfamethoxazole from aqueous solutions using less harmful UV-A light (λ_max 330 nm). The effect of solution pH (pH 4.0-8.0) and pollutant concentrations (1.0 mg/L-20.0 mg/L (for tetracycline) and (0.5 mg/L-15.0 mg/L (for sulfamethoxazole)) was extensively studied in the photocatalytic removal of these antibiotics. A significant decrease in percentage of non-purgeable organic carbon removal indicated that the micro-pollutants was substantially mineralized by the photocatalytic treatment. The stability of thin film was assessed by the repeated use of Nanocomposite thin films and results were indicated that the degradation of tetracycline or sulfamethoxazole was almost unaffected at least for six cycles of photocatalytic operations. The presence of several cations and anions in the degradation of these antibiotics was studied. Additionally, the presence of 2-propanol and EDTA inhibited significantly the degradation of these micro-pollutants i.e., the percentage of degradation was decreased by 31.8 and 24.2% (for tetracycline) and 42.8 and 39.9% (for sulfamethoxazole), respectively. This indicated that the degradation of tetracycline or sulfamethoxazole was predominantly proceeded by the OH radicals; generated at the valance and conduction band of semiconductor. Similarly, the presence of sodium azide inhibited the percentage removal of these antibiotics.

UV-Vis-Induced Degradation of Phenol over Magnetic Photocatalysts Modified with Pt, Pd, Cu and Au Nanoparticles

The combination of TiO₂ photocatalyst and magnetic oxide nanoparticles enhances the separation and recoverable properties of nanosized TiO₂ photocatalyst. Metal-modified (Me = Pd, Au, Pt, Cu) TiO₂/SiO₂@Fe₃O₄ nanocomposites were prepared by an ultrasonic-assisted sol-gel method. All prepared samples were characterized by X-ray powder diffraction (XRD) analysis, Brunauer-Emmett-Teller (BET) method, X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy (STEM), Mott-Schottky analysis and photoluminescence spectroscopy (PL). Phenol oxidation pathways of magnetic photocatalysts modified with Pt, Pd, Cu and Au nanoparticles proceeded by generation of reactive oxygen species, which oxidized phenol to benzoquinone, hydroquinone and catechol. Benzoquinone and maleic acid were products, which were determined in the hydroquinone oxidation pathway. The highest mineralization rate was observed for Pd-TiO₂/SiO₂@Fe₃O₄ and Cu-TiO₂/SiO₂@Fe₃O₄ photocatalysts, which produced the highest concentration of catechol during photocatalytic reaction. For Pt-TiO₂/SiO₂@Fe₃O₄ nanocomposite, a lack of catechol after 60 min of irradiation resulted in low mineralization rate (CO₂ formation). It is proposed that the enhanced photocatalytic activity of palladium and copper-modified photocatalysts is related to an increase in the amount of adsorption sites and efficient charge carrier separation, whereas the keto-enol tautomeric equilibrium retards the rate of phenol photomineralization on Au-TiO₂/SiO₂@Fe₃O₄. The magnetization hysteresis loop indicated that the obtained hybrid photocatalyst showed magnetic properties and therefore could be easily separated after treatment process.

Magnetically separable sulfur-doped SnFe2O4/graphene nanohybrids for effective photocatalytic purification of wastewater under visible light

In this report, magnetically recoverable sulfur-doped SnFe₂O₄/graphene (S-SFO/GR) nanohybrids have been successfully developed via a facile solvothermal method. The characterizations on the structural, morphology, and optical properties of the nanohybrids indicate that S-SFO particles are successfully embedded on the GR nanosheets. The photocatalytic activity has been evaluated by photocatalytic degradation of chlorotetracycline under visible light irradiation. Among the composites with various mass ratios, the quasi-first-order rate constant of the nanohybrids formed with 9wt% S in SFO and 15wt% GR (9S-SFO/GR-15) can reach as high as 1.83min^-1, which is much higher than that of SFO (0.68min^-1) and SFO/GR (0.91min^-1), confirming the important role of S and GR for the photocatalytic process. The combination of the three components of S, SFO, and GR has enhanced the visible light absorption capability and inhibited the recombination of photogenerated electron-hole. The 9S-SFO/GR-15 nanohybrids can be recovered easily by a magnet and reused for five times with remained photocatalytic efficiency about 70%. A possible catalytic mechanism explaining the efficient photocatalytic performances of the prepared nanohybrids has been proposed.