Recent advances in 2-D nanostructured metal nitrides, carbides, and phosphides electrodes for electrochemical supercapacitors – A brief review

Ru Prussian blue analogue-derived Ru nanoparticles composited with a trace amount of Pt as an efficacious electrocatalyst for the hydrogen evolution reaction

In this work, we designed a straightforward and highly reproducible synthetic methodology to prepare Ru0-Pt0 composites. We report a significant improvement in the electrocatalytic performance upon compositing Ru with a very trace amount of Pt. In particular, Ru nanoparticles were derived from a Ru-Prussian blue analogue (Ru PBA) and composited with (0.1, 0.5, and 1 mmol) metallic platinum following an optimized chemical reduction method. Interestingly, the composite with 0.5 mmol of Pt (Ru@C/Pt0.5) required low overpotentials of 32 and 140 mV to achieve current densities of 10 and 100 mA cm-2, respectively. Furthermore, Ru@C/Pt0.5 exhibited a smaller Tafel slope (26 mV dec-1), robust durability with 50 hours of long-term stability and a higher turnover frequency (TOF: 5.6 s-1@η10 mA cm-2) than commercial Pt/C (TOF: 4.1 s-1@η10 mA cm-2). First-principles calculations using density functional theory (DFT) revealed that the existence of Pt islands on the Ru nanoparticles weakened the strength of the adsorption of hydrogen at the Ru interstitials due to electrostatic repulsion caused by charge retention at Ru atoms near the corner of the islands, leading to rapid dissociation of hydrogen. This created a significant impact on the improvement of the electrocatalytic HER activity of the Ru@C/Pt0.5 electrocatalyst. It appears that restricting the concentration of Pt to trace amounts is a necessary condition for the observed catalytic efficiency, as the catalytic efficiency decreases with an increasing island size due to stronger binding of atomic hydrogen on peripheral Pt atoms and stabilization of adsorbed atomic hydrogen caused by softening of phonon modes with increasing island size. This study opens up a novel avenue for the exploration of highly efficient electrocatalysts for hydrogen evolution reactions.

Electrochemical Deposition for Cultivating Nano- and Microstructured Electroactive Materials for Supercapacitors: Recent Developments and Future Perspectives

The globe is currently dealing with serious issues related to the world economy and population expansion, which has led to a significant increase in the need for energy. One of the most promising energy devices for the next generation of energy technology is the supercapacitor (SC). Among the numerous nanostructured materials examined for SC electrodes, inorganic nanosheets are considered to be the most favorable electrode materials because of their excellent electrochemical performance due to their large surface area, very low layer thickness, and tunable diverse composition. Various inorganic nanosheets (NS) such as metal oxides, metal chalcogenides, metal hydroxides, and MXenes show substantial electrochemical activity. Herein, a comprehensive survey of inorganic NS arrays synthesized through the electrodeposition method is reported with the discussion on detailed growth mechanism and their application in the fabrication of SC electrodes/devices for powering flexible and wearable electronics appliances. To begin with, the first section will feature the various types of electrodeposition working mechanism, SC types and their working mechanisms, importance of nanosheet structure for SCs. This review gives a profound interpretation of supercapacitor electrode materials and their performances in different domains. Finally, a perspective on NS array through electrodeposition method applications in diverse fields is extensively examined.

Recent advances in the development of MXenes/cellulose based composites: A review

Over the past few years, transition metal carbides, nitrides, and carbonitrides, commonly referred to as MXenes have been discovered and utilized quickly in a range of technical fields due to their distinctive and controlled characteristics. MXenes are a new class of two-dimensional (2D) materials that have found extensive use in a variety of fields, including energy storage, catalysis, sensing, biology, and other scientific disciplines. This is because of their exceptional mechanical and structural characteristics, metal electrical conductivity, and other outstanding physical and chemical properties. In this contribution, we review recent cellulose research advances and show that MXene hybrids are effective composites that benefit from cellulose superior water dispersibility and the electrostatic attraction between cellulose and MXene to prevent MXene accumulation and improve the composite's mechanical properties. Electrical, materials, chemical, mechanical, environmental, and biomedical engineering are all fields in which cellulose/MXene composites are used. These properties and applications-based reviews on MXene/cellulose composite, critically analyze the results and accomplishments in these fields and provide context for potential future research initiatives. It examines newly reported applications for cellulose nanocomposites assisted by MXene. To support their development and future applications, perspectives and difficulties are suggested in the conclusion.

Modulating the Combinatorial Target Power of MgSnN2 via RF Magnetron Sputtering for Enhanced Optoelectronic Performance: Mechanistic Insights from DFT Studies

The unique structural features of many ternary nitride materials with strong chemical bonding and band gaps above 2.0 eV are limited and are experimentally unexplored. It is important to identify candidate materials for optoelectronic devices, particularly for light-emitting diodes (LEDs) and absorbers in tandem photovoltaics. Here, we fabricated MgSnN₂ thin films, as promising II-IV-N₂ semiconductors, on stainless-steel, glass, and silicon substrates via combinatorial radio-frequency magnetron sputtering. The structural defects of the MgSnN₂ films were studied as a function of the Sn power density, while the Mg and Sn atomic ratios remained constant. Polycrystalline orthorhombic MgSnN₂ was grown on the (120) orientation within a wide optical band gap range of ∼2.20-2.17 eV. The carrier densities of 2.18× 10²⁰ to 1.02 × 10²¹ cm^-3, mobilities between 3.75 and 2.24 cm²/Vs, and a decrease in resistivity from 7.64 to 2.73 × 10^-3 Ω cm were confirmed by Hall-effect measurements. These high carrier concentrations suggested that the optical band gap measurements were affected by a Burstein-Moss shift. Furthermore, the electrochemical capacitance properties of the optimal MgSnN₂ film exhibited an areal capacitance of 152.5 mF/cm² at 10 mV/s with high retention stability. The experimental and theoretical results showed that MgSnN₂ films were effective semiconductor nitrides toward the progression of solar absorbers and LEDs.

ZIF-8 metal organic framework composites as hydrogen evolution reaction photocatalyst: A review of the current state

In the past decade, extensive research has been devoted to synthesis of ZIF-8 materials for catalytic applications. As physico-chemical properties are synthesis-dependent, this review explores different synthesis strategies based the solvent and solvent-free synthesis of zeolitic imidazole framework. Accordingly, the effect of several parameters on the ZIF-8 synthesis were discussed including solvent, deprotonating agents, precursors ratio is delivered. Additionally, the advantages and disadvantages of each synthesis have been discussed and assessed. ZIF-8 textural and structural properties justify its wide use as a stable high surface area MOF in aqueous catalytic reactions. This review includes the applicatios of ZIF-8 materials in photocatalytic hydrogen evolution reaction (HER). The efficiency of the reviewed materials was fairly assessed. Finally, Limitations, drawbacks and future challenges were fully debated to ensure the industrial viability of the ZIFs.

Status review of nickel phosphides for hybrid supercapacitors

Transition metal phosphides are a new class of materials that have attracted enormous attention as a potential electrode for supercapacitors (SCs) compared to metal oxides/hydroxides and metal sulfides due to their strong redox-active behaviour, good electrical conductivity, layered structure, low cost, and high chemical and thermal stability. Recently, several efforts have been made to develop nickel phosphides (Ni_xP_y) (NPs) for high-performance SCs. The electrochemical properties of NPs can be easily tuned by several innovative approaches, such as heteroatom doping, defect engineering, and developing a hollow architecture. The prospects of NPs as a positive electrode in hybrid SCs are summarized to understand the material's practical relevance. Finally, the challenges and perspectives are provided for the development of high-performance NPs for SCs. The thorough elucidation of the structure-property-performance relationship offers a guide for developing NP-based next-generation energy-storage devices.

Recent Advancements in Two-Dimensional Layered Molybdenum and Tungsten Carbide-Based Materials for Efficient Hydrogen Evolution Reactions

Green and renewable energy is the key to overcoming energy-related challenges such as fossil-fuel depletion and the worsening of environmental habituation. Among the different clean energy sources, hydrogen is considered the most impactful energy carrier and is touted as an alternate fuel for clean energy needs. Even though noble metal catalysts such as Pt, Pd, and Au exhibit excellent hydrogen evolution reaction (HER) activity in acid media, their earth abundance and capital costs are highly debatable. Hence, developing cost-effective, earth-abundant, and conductive electrocatalysts is crucial. In particular, various two-dimensional (2D) transition metal carbides and their compounds are gradually emerging as potential alternatives to noble metal-based catalysts. Owing to their improved hydrophilicity, good conductivity, and large surface areas, these 2D materials show superior stability and excellent catalytic performances during the HER process. This review article is a compilation of the different synthetic protocols, their impact, effects of doping on molybdenum and tungsten carbides and their derivatives, and their application in the HER process. The paper is more focused on the detailed strategies for improving the HER activity, highlights the limits of molybdenum and tungsten carbide-based electrocatalysts in electro-catalytic process, and elaborates on the future advancements expected in this field.

NiSe2 Nanoparticles Encapsulated in N-Doped Carbon Matrix Derived from a One-Dimensional Ni-MOF: An Efficient and Sustained Electrocatalyst for Hydrogen Evolution Reaction

The spherical-type NiSe₂ nanoparticles encapsulated in a N-doped carbon (NC) matrix (NiSe₂-T@NC, temperature (T) = 400-800 °C) are derived from a 1D Ni-MOF precursor of the formula [Ni(BPY)(DDE)] [(BPY = 2,2'-bipyridyl), (DDE = 4,4'-dicarboxy diphenyl ether)] via a facile solvothermal technique followed by annealing at different temperatures and selenylation strategies. The combined effect of a NC matrix and the Ni nanoparticles has been optimized during varied annealing processes with subsequent selenylation, leading to the formation of the series NiSe₂-400@NC, NiSe₂-500@NC, NiSe₂-600@NC, NiSe₂-700@NC, and NiSe₂-800@NC, respectively. The variation of annealing temperature plays a vital role in optimizing the catalytic behavior of the NiSe₂-T@NCs. Among different high-temperature annealed products, NiSe₂-600@NC shows superior electrocatalytic performance because of the unique spherical-type morphology and higher specific surface area (57.95 m² g^-1) that provides a large number of electrochemical active sites. The synthesized material exhibits a lower overpotential of 196 mV to deliver 10 mA cm^-2 current density, a small Tafel slope of 45 mV dec^-1 for better surface kinetics, and outstanding durability in an acidic solution, respectively. Consequently, the post stability study of the used electrocatalyst gives insight into surface phase analysis. Therefore, we presume that the synthesized 1D MOF precursor derived NiSe₂ nanoparticles encapsulated in a NC matrix has excellent potential to replace the noble-metal-based electrocatalyst for enhanced hydrogen evolution through simple water electrolysis.

Facile Hydrothermal Synthesis and Supercapacitor Performance of Mesoporous Necklace-Type ZnCo2O4 Nanowires

In this work, mesoporous ZnCo2O4 electrode material with necklace-type nanowires was synthesized by a simple hydrothermal method using water/ethylene glycol mixed solvent and subsequent calcination treatment. The ZnCo2O4 nanowires were assembled by several tiny building blocks of nanoparticles which led to the growth of necklace-type nanowires. The as-synthesized ZnCo2O4 nanowires had porous structures with a high surface area of 25.33 m2 g−1 and with an average mesopore of 23.13 nm. Due to the higher surface area and mesopores, the as-prepared necklace-type ZnCo2O4 nanowires delivered a high specific capacity of 439.6 C g−1 (1099 F g−1) at a current density of 1 A g−1, decent rate performance (47.31% retention at 20 A g−1), and good cyclic stability (84.82 % capacity retention after 5000 cycles). Moreover, a hybrid supercapacitor was fabricated with ZnCo2O4 nanowires as a positive electrode and activated carbon (AC) as a negative electrode (ZnCo2O4 nanowires//AC), which delivered an energy density of 41.87 Wh kg−1 at a power density of 800 W kg−1. The high electrochemical performance and excellent stability of the necklace-type ZnCo2O4 nanowires relate to their unique architecture, high surface area, mesoporous nature, and the synergistic effect between Zn and Co metals.

Ni Foam-Supported Tin Oxide Nanowall Array: An Integrated Supercapacitor Anode

A novel product consisting of a homogeneous tin oxide nanowall array with abundant oxygen deficiencies and partial Ni-Sn alloying onto a Ni foam substrate was successfully prepared using a facile solvothermal synthesis process with subsequent thermal treatment in a reductive atmosphere. Such a product could be directly used as integrated anodes for supercapacitors, which showed outstanding electrochemical properties with a maximum specific capacitance of 31.50 mAh·g^-1 at 0.1 A·g^-1, as well as good cycling performance, with a 1.35-fold increase in capacitance after 10,000 cycles. An asymmetric supercapacitor composed of the obtained product as the anode and activated carbon as the cathode was shown to achieve a high potential window of 1.4 V. The excellent electrochemical performance of the obtained product is mainly ascribed to the hierarchical structure provided by the integrated, vertically grown nanowall array on 3D Ni foam, the existence of oxygen deficiency and the formation of Ni-Sn alloys in the nanostructures. This work provides a general strategy for preparing other high-performance metal oxide electrodes for electrochemical applications.

Application of advanced materials in sonophotocatalytic processes for the remediation of environmental pollutants

Significant advances in various industrial processes have resulted in the discharge of toxic pollutants into the environment. Consequently, it is essential to develop efficient wastewater treatment processes to reduce water contamination and increase recycling/reuse. Photocatalytic degradation is considered as an efficient method for the degradation of toxic pollutants in industrial wastewater. However, the use of photocatalytic approaches is associated with numerous limitations, such as lengthy procedures and the necessity for large amounts of catalysts. Hence, it has been proposed that photocatalysis could be combined with other techniques, including sonolysis, electrochemical, photothermal, microwave, ultrafiltration, and biological reactor. The integration of photocatalysis with sonolysis could be remarkably beneficial for environmental remediation. The combination of these processes has the advantages of using uniformly dispersed catalysts, regeneration of the catalyst surface, improved mass transfer, enhanced surface area due to smaller catalyst particles, and production of more active radicals for the degradation of organic pollutants. In this review, an overview on employing sonophotocatalysis for the removal of toxic organic contaminants from aqueous environments is provided. Additionally, the limitations of photocatalysis alone and the fundamental sonophotocatalytic mechanistic pathways are discussed. The importance of utilizing advanced two-dimensional (2D) semiconductor materials in sonophotocatalysis and the common synthetic approaches for the preparation of 2D materials are also highlighted. Lastly, the review provides comprehensive insights into different materials based on metal oxides, chalcogenides, graphene, and metal organic frameworks (MOFs), which are involved in sonophotocatalytic processes employed for the remediation of environmental pollutants.

A Tröger's Base-Derived Covalent Organic Polymer Containing Carbazole Units as a High-Performance Supercapacitor

Porous organic polymers have been received considerable attention due to their heteroatom-containing structures and high surface areas, which can offer high electrochemical performance in energy applications. The majority of reported Tröger's base-functionalized porous organic polymers have been applied as effective candidates for sensing and gas separation/adsorption, while their use as electrode materials in supercapacitors is rare. Here, a novel covalent microporous organic polymer containing carbazole and Tröger's base CzT-CMOP has been successfully synthesized through the one-pot polycondensation of 9-(4-aminophenyl)-carbazole-3,6-diamine (Cz-3NH₂) with dimethoxymethane. The polycondensation reaction's regioselectivity was studied using spectroscopic analyses and electronic structure calculations that confirmed the polycondensation occurred through the second and seventh positions of the carbazole unit rather than the fourth and fifth positions confirmed by first-principles calculations. Our CzT-CMOP exhibited high thermal stability of approximately 463.5 °C and a relatively high Brunauer-Emmett-Teller surface area of 615 m² g^-1 with a nonlocal density functional theory's pore size and volume of 0.48 cm³ g^-1 and 1.66 nm, respectively. In addition, the synthesized CzT-CMOP displayed redox activity due to the existence of a redox-active carbazole in the polymer skeleton. CzT-CMOP revealed high electrochemical performance when used as active-electrode material in a three-electrode supercapacitor with an aqueous electrolyte of 6 M KOH, and it showed specific capacitance of 240 F g^-1 at a current density of 0.5 A g^-1 with excellent stability after 2000 cycles of 97% capacitance retention. Accordingly, such porous organic polymer appears to have a variety of uses in energy-related applications.

ZIF-8 templated assembly of La3+-anchored ZnO distorted nano-hexagons as an efficient active photocatalyst for the detoxification of rhodamine B in water

The use of lanthanum-anchored zinc oxide distorted hexagon (La@ZnO DH) nanoclusters as an active material for the photodegradation of rhodamine B (Rh-B) dye via hydrogen bonding, electrostatic, and π-π interactions is examined herein. The active photocatalyst is derived from porous zeolite imidazole frameworks (ZIF-8) via a combined ultrasonication and calcination process. The distorted hexagon nanocluster morphology with controlled surface area is shown to provide excellent catalytic activity, chemical stability and demarcated pore volume. In addition, the low bandgap (3.57 eV) of La@ZnO DH is shown to expand the degradation of Rh-B under irradiation of UV light as compared to the pristine ZIF-8-derived ZnO photocatalyst due to inhibited recombination of electrons and holes. The outstanding physicochemical stability and enhanced performance of La@ZnO DH could be ascribed to the synergistic interaction among La3+ particles and the ZnO nanoclusters and provide a route for their utilization as a promising catalyst for the detoxification of Rh-B.

Designed assembly of Ni/MAX (Ti3AlC2) and porous graphene-based asymmetric electrodes for capacitive deionization of multivalent ions

The contamination of aquatic ecosystems by fluoride and heavy metal ions constitute an environmental hazard and has been proven to be harmful to human health. This study explores the feasibility of using asymmetric capacitive deionization (CDI) electrodes to remove such toxic ions from wastewater. An asymmetric CDI cell was fabricated using 2D Ni/MAX as an anode and 3D porous reduced graphene oxide (pRGO) as a cathode for the electrosorption of F^-, Pb²⁺, and As(III) ions. A simple microwave process was used for the synthesis of Ni/MAX composite using fish sperm DNA (f-DNA) as a cross-linker between MAX nanosheets (NSs) and the metallic Ni nanoparticles (NPs). Further, pRGO anode was prepared through effective reduction of RGO using lemon juice as green reducing agent with the assist of f-DNA as a structure-directing agent for the formation of 3D network. With this tailored nanoarchitecture, pRGO and Ni/MAX electrodes exhibited a high specific capacitance of 760 and 385 F g^-1, respectively. The fabricated Ni/MAX and pRGO based CDI system demonstrated a high electrosorption capacity of 68, 76, and 51 mg g^-1 for the monovalent F^-, divalent Pb²⁺, and trivalent As(III) ions at 1.4 V in neutral pH. Furthermore, Ni/MAX//pRGO system was successfully applied for the removal of total F(T), Pb(T), and As(T) ions from real industrial wastewater and contaminated groundwater. The present findings indicate that the fabricated Ni/MAX//pRGO electrode has excellent electrochemical properties that can be exploited for the removal of anionic and cationic metal ions from aqueous solutions in a CDI based system.

Preparation of Porous Carbon Nanofiber Electrodes Derived from 6FDA-Durene/PVDF Blends and Their Electrochemical Properties

Highly porous carbon electrodes for supercapacitors with high energy storage performance were prepared by using a new precursor blend of aromatic polyimide (PI) and polyvinylidene fluoride (PVDF). Supercapacitor electrodes were prepared through the electrospinning and thermal treatment of the precursor blends of aromatic PI and PVDF. Microstructures of the carbonized PI/PVDF nanofibers were studied using Raman spectroscopy. Nitrogen adsorption/desorption measurements confirmed their high surface area and porosity, which is critical for supercapacitor performance. Energy storage performance was investigated and carbonized PI/PVDF showed a high specific capacitance of 283 F/g at 10 mV/s (37% higher than that of PI) and an energy density of 11.3 Wh/kg at 0.5 A/g (27% higher than that of PI) with high cycling stability.

Cost-Effective Synthesis of Efficient CoWO4/Ni Nanocomposite Electrode Material for Supercapacitor Applications

In the present study, the synthesis of CoWO4 (CWO)-Ni nanocomposites was conducted using a wet chemical method. The crystalline phases and morphologies of the Ni nanoparticles, CWO, and CWO-Ni composites were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDAX). The electrochemical properties of CWO and CWO-Ni composite electrode materials were assessed by cyclic voltammetry (CV), and galvanostatic charge-discharge (GCD) tests using KOH as a supporting electrolyte. Among the CWO-Ni composites containing different amounts of Ni1, Ni2, and Ni3, CWO-Ni3 exhibited the highest specific capacitance of 271 F g-1 at 1 A g-1, which was greater than that of bare CWO (128 F g-1). Moreover, the CWO-Ni3 composite electrode material displayed excellent reversible cyclic stability and maintained 86.4% of its initial capacitance after 1500 discharge cycles. The results obtained herein demonstrate that the prepared CWO-Ni3 nanocomposite is a promising electrode candidate for supercapacitor applications.

Recent Advances in Nanostructured Transition Metal Carbide- and Nitride-Based Cathode Electrocatalysts for Li-O2 Batteries (LOBs): A Brief Review

A large volume of research on lithium-oxygen (Li-O2) batteries (LOBs) has been conducted in the recent decades, inspired by their high energy density and power density. However, these future generation energy-storage devices are still subject to technical limitations, including a squat round-trip efficiency and a deprived rate-capability, due to the slow-moving electrochemical kinetics of both the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) over the surface of the cathode catalyst. Because the electrochemistry of LOBs is rather complex, only a limited range of cathode catalysts has been employed in the past. To understand the catalytic mechanisms involved and improve overall cell performance, the development of new cathode electrocatalysts with enhanced round-trip efficiency is extremely important. In this context, transition metal carbides and nitrides (TMCs and TMNs, respectively) have been explored as potential catalysts to overcome the slow kinetics of electrochemical reactions. To provide an accessible and up-to-date summary for the research community, the present paper reviews the recent advancements of TMCs and TMNs and its applications as active electrocatalysts for LOBs. In particular, significant studies on the rational design of catalysts and the properties of TMC/TMN in LOBs are discussed, and the prospects and challenges facing the continued development of TMC/TMN electrocatalysts and strategies for attaining higher OER/ORR activity in LOBs are presented.

Asymmetric Pseudocapacitors Based on Interfacial Engineering of Vanadium Nitride Hybrids

Vanadium nitride (VN) shows promising electrochemical properties as an energy storage devices electrode, specifically in supercapacitors. However, the pseudocapacitive charge storage in aqueous electrolytes shows mediocre performance. Herein, we judiciously demonstrate an impressive pseudocapacitor performance by hybridizing VN nanowires with pseudocapacitive 2D-layered MoS2 nanosheets. Arising from the interfacial engineering and pseudocapacitive synergistic effect between the VN and MoS2, the areal capacitance of VN/MoS2 hybrid reaches 3187.30 mF cm-2, which is sevenfold higher than the pristine VN (447.28 mF cm-2) at a current density of 2.0 mA cm-2. In addition, an asymmetric pseudocapacitor assembled based on VN/MoS2 anode and TiN coated with MnO2 (TiN/MnO2) cathode achieves a remarkable volumetric capacitance of 4.52 F cm-3 and energy density of 2.24 mWh cm-3 at a current density of 6.0 mA cm-2. This work opens a new opportunity for the development of high-performance electrodes in unfavorable electrolytes towards designing high areal-capacitance electrode materials for supercapacitors and beyond.

Tungsten Nitride, Well-Dispersed on Porous Carbon: Remarkable Catalyst, Produced without Addition of Ammonia, for the Oxidative Desulfurization of Liquid Fuel

Polyanilines (pANIs), loaded with phosphotungstic acid (PTA), are pyrolyzed to get WO₃ or W₂ N (≈6 and ≈7 nm, respectively), which is well-dispersed on pANI-derived porous carbons (pDCs). Depending on the pyrolysis temperature, WO₃ /pDC, W₂ N/pDC, or W₂ N-W/pDCs could be obtained selectively. pANI acts as both the precursor of pDC and the nitrogen source for the nitridation of WO₃ into W₂ N during the pyrolysis. Importantly, W₂ N could be obtained from the pyrolysis without ammonia feeding. The obtained W₂ N/pDC is applied as a heterogeneous catalyst for the oxidative desulfurization (ODS) of liquid fuel for the first time, and the results are compared with WO₃ /pDC and WO₃ /ZrO₂ . The W₂ N/pDC is very efficient in ODS with remarkable performance compared with WO₃ /pDC or WO₃ /ZrO₂ , which is applied as a representative ODS catalyst. For example, W₂ N/pDC shows around 3.4 and 2.7 times of kinetic constant and turnover frequency (based on 5 min of reaction), respectively, compared to that of WO₃ /ZrO₂ . Moreover, the catalysts could be regenerated in a facile way. Therefore, W₂ N/pDC could be produced facilely from pyrolysis (without ammonia feeding) of PTA/pANI, and W₂ N, well-dispersed on pDC, can be suggested as a very efficient oxidation catalyst for the desulfurization of liquid fuel.

Synthesis of Metal Phosphide Nanoparticles Supported on Porous N-Doped Carbon Derived from Spirulina for Universal-pH Hydrogen Evolution

Transition metal phosphides (TMPs) are regarded as highly active electrocatalysts for the hydrogen evolution reaction (HER). However, traditional synthetic routes usually use expensive and dangerous precursors as P donors. The development of a low-cost and ecofriendly method for the synthesis of TMPs is significant for sustainable energy development. Herein, cobalt phosphides anchored on or embedded in a spirulina-derived porous N-doped carbon matrix (Co₂ P/NC) was fabricated by two-step hydrothermal treatment and carbonization method, which utilized the intrinsic C, N, and P of biomass cleverly as the sources of C, N, and P, respectively. As a result of the high surface area and porosity that enhance the mass-transfer dynamics, Co₂ P/NC shows good electrocatalytic activity at all pH values in the HER. This work not only provides a facile and effective method for the fabrication of TMP nanoparticles loaded onto carbon materials but also opens a new strategy for the utilization of the intrinsic ingredients of biomass for the preparation of other functional electrocatalysts.

Study on the voltage drop of vanadium nitride/carbon composites derived from the pectin/VCl3 membrane as a supercapacitor anode material

The adsorption of metal ions and the further utilization of adsorbent materials help solve serious environmental pollution; therefore, transforming them into supercapacitor electrode materials could be a promising possibility.

Boron triggers the phase transformation of Mo x C (α-MoC1-x /β-Mo2C) for enhanced hydrogen production

As highly efficient non-precious metal-based catalysts for the hydrogen evolution reaction (HER), molybdenum carbides have attracted much attention over the phase and structure modification for the improvement of HER performances. In this work, a novel strategy is proposed to modulate phases of molybdenum carbides by boron doping, so that the HER performances can be well controlled. After B-doping, the HER activity of the as-prepared B30 catalyst is significantly enhanced with a much smaller Tafel slope of 78 mV dec-1 than that of the blank one (134 mV dec-1), which originates from the increased amount of active sites, enhanced turnover frequency of each active site and reduced electron transfer resistance. Moreover, this work could broaden our view of phase regulation and provide more possible perspectives for the application in other fields.

Structural Properties of Vicsek-like Deterministic Multifractals

Deterministic nano-fractal structures have recently emerged, displaying huge potential for the fabrication of complex materials with predefined physical properties and functionalities. Exploiting the structural properties of fractals, such as symmetry and self-similarity, could greatly extend the applicability of such materials. Analyses of small-angle scattering (SAS) curves from deterministic fractal models with a single scaling factor have allowed the obtaining of valuable fractal properties but they are insufficient to describe non-uniform structures with rich scaling properties such as fractals with multiple scaling factors. To extract additional information about this class of fractal structures we performed an analysis of multifractal spectra and SAS intensity of a representative fractal model with two scaling factors—termed Vicsek-like fractal. We observed that the box-counting fractal dimension in multifractal spectra coincide with the scattering exponent of SAS curves in mass-fractal regions. Our analyses further revealed transitions from heterogeneous to homogeneous structures accompanied by changes from short to long-range mass-fractal regions. These transitions are explained in terms of the relative values of the scaling factors.