Conjoined-network induced highly tough hydrogels by using copolymer and nano-cellulose for oilfield water plugging

Nanocellulose/scleroglucan-enhanced robust, heat-resistant composite hydrogels for oilfield water plugging

In an oil exploitation process, hydrogel plugging agents can effectively reduce the water-oil intermixing, decrease water extraction volume, and enhance oil recovery rate. The practical applications of traditional polyacrylamide (PAM) hydrogel plugging agents in oilfield are limited by their non-biodegradability, poor mechanical performance, and inferior temperature-resistance. This work developed a mechanically stable and high-temperature-resistant composite hydrogel (STP) by incorporating biodegradable scleroglucan (Slg) and TEMPO-oxidized cellulose nanofibers (TOCN) in the PAM hydrogel. The addition of Slg conferred heat resistance to the PAM hydrogel, while TOCN reinforced the mechanical strength. Anti-aging analyses revealed that the STP endured for 108 h in a saline environment at 140 °C. In the water flooding characterization, the STP displayed a breakthrough pressure of 42.10 psi/ft. at a flow rate of 0.75 cm3/min. Under these extreme conditions, the plugging pressure reached 14.74 psi/ft., meeting the essential criteria for oilfield water plugging. This research demonstrates the potential of polysaccharides in the preparation of sustainable, tough, and heat-resistant water plugging materials.

Application of Hydrogels and Hydrocarbon-Based Gels in Oil Production Processes and Well Drilling

The use of gels in oil production processes has become a regular practice in oilfield operations and is constantly developing in all oil-producing countries of the world, as evidenced by the growth of publications and patent activity on this topic. Many oil production processes, such as hydraulic fracturing, conformance control, water, and gas shutoff, cannot be imagined without the use of gel technologies. Inorganic, organic, and hybrid gels are used, as well as foams, gel-forming, and gel-dispersed systems. The possibility of a broad control of structural and mechanical properties, thermal stability, and shear resistance by introducing microscale and nanoscale additives made hydrogels and hydrocarbon-based gels indispensable tools for oil engineers.

Preparation and Study of Polyvinyl Alcohol Gel Structures with Acrylamide and 2-Acrylamido-2-methyl-1-propanesulfonic Acid for Application in Saline Oil Reservoirs for Profile Modification

Polymer gels can be effectively applied to plug fractured reservoirs and carbonate cave strata. Herein, polyvinyl alcohol (PVA), acrylamide, and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) were used as raw materials to prepare interpenetrating three-dimensional network polymer gels using formation saltwater in the Tahe oilfield (Tarim Basin, NW China) as a solvent. The effect of AMPS concentration on the gelation properties of PVA in high-temperature formation saltwater was analyzed. Further, the effect of PVA concentration on the strength and viscoelastic properties of polymer gel was studied. The polymer gel could retain stable continuous entanglement at 130 °C and exhibited satisfactory thermal stability. Continuous step oscillation frequency tests showed that it exhibited an excellent self-healing performance. Scanning electron microscopy images of the simulated core by gel plugging showed that the polymer gel could firmly fill the porous media, indicating that the polymer gel exhibits excellent application prospects in oil and gas reservoirs under high-temperature and high-salinity conditions.

Bimetallic MOFs loaded cellulose as an environment friendly bioadsorbent for highly efficient tetracycline removal

Due to the increasingly serious antibiotic-related pollution, it is crucial to develop novel green bioadsorbents to effectively remove antibiotics from aqueous solutions. In this study, Fe doped zeolitic imidazolate frameworks-8 loaded cellulose (Fe/ZIF-8@cellulose) aerogels were prepared. The synthesized Fe/ZIF-8@cellulose aerogels were characterized experimentally including morphology observation and chemical compositions determination. The effects of bioadsorbent dosage, solution pH, adsorption time, initial TC concentration and adsorption temperature on the TC adsorption behaviors were systematically studied. Due to the introduction of Fe in the ZIF-8, the maximum adsorption capacity of Fe/ZIF-8@cellulose for TC could reach as high as 1359.2 mg/g, which is higher than the reported ZIF-8 loaded polysaccharide based adsorbents. The adsorption kinetics and isotherm of TC adsorption were also determined. With the cellulose as the matrix to load Fe/ZIF-8, the obtained Fe/ZIF-8@cellulose aerogels exhibited good reusability. Most importantly, the TC adsorption mechanism was proposed. The results of our finding suggest that the Fe doping into MOFs is an effective strategy to improve the antibiotics adsorption performance and the application of cellulose as the matrix is a valuable method to increase the cyclic utilization. This study highlights the potentials of applying the Fe/ZIF-8@cellulose aerogels in the antibiotics removal for practical wastewater.

Liquid Foam Stabilized by a CO2-Responsive Surfactant and Similarly Charged Cellulose Nanofibers for Reversibly Plugging in Porous Media

CO₂ foams are of great importance in oil recovery but challenging in some aspects like long-term stabilization and time-separated conflict. In this work, a stability-enhanced switchable foam was fabricated using bis-(2-hydroxyethoxy) olefine amine (BOA) and trace amounts (0.05 wt %) of cationic-modified cellulose nanofibers (CCNFs). The CCNF was developed using sequentially functionalized CNF with diamine groups, which were essential to promote the aqueous dispersibility and a key for strengthening the stabilization of foam. The combination of similarly charged CCNFs and BOA in the presence of CO₂ contributed to both surface activity and viscoelasticity. It was demonstrated that CCNFs were entangled and stacked to form the compact films and possessed the ability to costabilize the lamellae, as observed by microscopic studies. In addition, the intermolecular H-bonds were promoted in the binary system after being protonated by CO₂ and thus balancing the electrostatic forces, as explored by spectroscopy characterizations. The soft fibrous structure of the CCNF was also capable of wrapping gas bubbles in the form of a functional membrane with both low gas permeability and high surface potential, which slowed down the coarsening and coalescence. Of particular interest is that the reversible protonation state of CCNF-BOA complexes upon the alternate treatment with CO₂/N₂ led to reversible fast foaming/defoaming, which would be beneficial to construct the steerable plugging in the sand pack. This work is expected to provide a new direction and application of the CO₂ responsive foam stabilized by similarly charged nanocellulose fibers in oilfield development.

Oxidized alginate linked tough conjoined-network hydrogel with self-healing and conductive properties for strain sensing

In this article, we prepared a conjoined-network hydrogel with acrylamide-modified chitosan, oxidized alginate and polyacrylamide. The oxidized alginate can not only crosslink with chitosan to form a hydrogel network but...