Oxidation of Zn(N2S2) complexes to disulfonates: relevance to zinc-finger oxidation under oxidative stress

Playing with Pearson's concept: orthogonally functionalized 1,4-diaza-1,3-butadienes leading to heterobinuclear complexes

By reacting 1,2-diketones and ortho- diphenylphosphinoyl aniline in the presence of zinc(ii) as a templating agent, cationic zinc(ii) complexes of novel phosphine oxide functionalized 1,4-diaza-1,3-butadiene ligands are acessible. Herein the zinc(ii) site is bound to all four donor atoms of the ligand. Depending on the flexibility of the 1,4-diaza-1,3-butadiene backbone, the bonds to zinc(ii) from the 1,4-diaza-1,3-butadiene donors can be broken. Reaction with oxalate cleaves the zinc(ii) coordination completely and makes accessible the free ligands possessing orthogonal (N,N: soft; O,O: hard) sets of donor sites. This allows for the specific coordination of soft and hard Lewis acids and thus for the generation of heterobimetallic complexes, here exemplarily shown for the combination of palladium(ii) (soft) and zinc(ii) (hard) centres.

Reductive metalation of cyclic and acyclic pseudopeptidic bis-disulfides and back conversion of the resulting diamidato/dithiolato complexes to bis-disulfides

Cyclic and acyclic pseudopeptidic bis-disulfides built on an o-phenylene diamine scaffold were prepared: (N(2)H(2)S(2))(2), 1a, N(2)H(2)(S-SCH(3))(2), 1b, and N(2)H(2)(S-StBu)(2), 1c. Reductive metalation of these disulfides with (PF(6))[Cu(CH(3)CN)(4)] in the presence of Et(4)NOH as a base, or with (Et(4)N)[Fe(SEt)(4)] and Et(4)NCl, yields the corresponding diamidato/dithiolato copper(III) or iron(III) complex, (Et(4)N)[Cu(N(2)S(2))], 2, or (Et(4)N)(2)[Fe(N(2)S(2))Cl], 5. These complexes display characteristics similar to those previously described in the literature. The mechanism of the metalation with copper has been investigated by X-band electron paramagnetic resonance (EPR) spectroscopy at 10 K. After metalation of the bis-disulfide 1c and deprotonation of the amide nitrogens, the reductive cleavage of the S-S bonds occurs by two one-electron transfers leading to the intermediate formation of a copper(II) complex and a thyil radical. Complexes 2 and 5 can be converted back to the cyclic bis-disulfide 1a with iodine in an 80% yield. Reaction of 5 with iodine in the presence of CH(3)S-SCH(3) affords a 1/1 mixture of the acyclic N(2)H(2)(S-SCH(3))(2) disulfide 1b and cyclic bis-disulfide 1a. From 2, the reaction was monitored by (1)H NMR and gives 1b as major product. While there is no reaction of 2 or 5 with tBuS-StBu and iodine, reaction with an excess of tBuSI affords quantitatively the di-tert-butyl disulfide 1c. To assess the role of the Cu(III) oxidation state, control experiments were carried out under strictly anaerobic conditions with the copper(II) complex, (Et(4)N)(2)[Cu(N(2)S(2))], 6. Complex 6 is oxidized to 2 by iodine, and it reacts with an excess of tBuSI, yielding 1c as final product, through the intermediate formation of complex 2.

Thiol-copper(I) and disulfide–dicopper(I) complex O2-reactivity leading to sulfonate–copper(II) complex or the formation of a cross-linked thioether–phenol product with phenol addition

In order to better understand copper mediated oxidative chemistry via ligand-Cu(I)/O(2) reactivity employing S-donor ligands for copper, O(2)-reactivity studies of the copper(I) complexes (1 and 2, Chart 2) have been carried out with a tridentate N(2)S thiol ligand (1-(N-methyl-N-(2-(pyridin-2-yl)ethyl)amino)propane-2-thiol; L(SH)) or its oxidized disulfide form (L(SS)). Reactions of [L(SH)Cu(I)](+) (1) and [L(SS)(Cu(I))(2)(X)(2)](2+) (2) with O(2) give approximately 90% and approximately 70% yields of [L(SO3)Cu(II)(MeOH)(2)](+) (3), respectively, where L(SO3) is S-oxygenated sulfonate; 3 was characterized by electrospray ionization (ESI) mass spectrometry and X-ray crystallography. Mimicking TyrCys galactose oxidase cofactor biogenesis, a new C-S bond is formed (within new thioether moiety L(SPhOH)) from cuprous complex (both 1 and 2) dioxygen reactivity in the presence of 2,4-tBu(2)-phenolate. In addition, the disulfide ligand (L(SS)) reacts with 2equiv. cupric ion salts and the phenolate to efficiently give the cross-linked product L(SPhOH) in high yield (>90%) under anaerobic conditions. Separately, complex [L(SPhO)Cu(II)(ClO(4))] (4), possessing the cross-linked L(SPhOH), was characterized by ESI mass spectrometry and X-ray crystallography.

Metalation of Cyclic Pseudopeptidic Thiosulfinates with Ni(II) and Zn(II) after Ring Opening: A Mechanistic Investigation

Thiosulfinates are an emerging class of oxidized sulfur species that are frequently supposed to be involved in biochemical processes. Reaction of 12- and 10-membered ring pseudopeptidic thiosulfinates 1a (4,4,7,7-tetramethyl-1,3,4,7,8,10-hexahydro-5,6,1,10-benzodithiadiazacyclododecine-2,9-dione 5-oxide) and 1b (3,3,6,6-tetramethyl-1,8-dihydro-4,5,1,8-benzodithiadiazecine-2,7(3H,6H)-dione 4-oxide) with a Ni(II) salt leads after ring cleavage under alkaline conditions to the isolation of diamidato/thiolato/sulfinato complexes. These two thiolato/sulfinato complexes of nickel, which can also be prepared by dioxygen oxidation of the parent diamidato/dithiolato complexes, were characterized by X-ray crystallography. They show a square-planar geometry with a S-bonded sulfinato ligand. A similar reaction between 1b and a Zn(II) salt leads to a thiolato/sulfinato complex with an O-bonded sulfinate via the intermediate formation of a mixed thiolato/sulfinic ester. On the basis of 1H NMR, IR, and mass analyses, the sulfinic ester in the intermediate is proposed to be O-bonded to the zinc center. Then, an in-depth study of the cleavage of these thiosulfinates with the oxyanions RO- and HO- was performed. This led, after trapping of the open species with CH3I, to the identification of three polyfunctionalized products containing a methyl thioether, with either an isothiazolidin-3-one S-oxide, a methyl sulfone, or a methyl sulfinic ester. All of these products arise from a selective nucleophilic attack at the sulfinyl sulfur, promoted either directly by RO- or HO- or by an internal peptidic nitrogen of the thiosulfinate after deprotonation with RO- or HO-.

Zinc coordination environments in proteins as redox sensors and signal transducers

Zinc/cysteine coordination environments in proteins are redox-active. Oxidation of the sulfur ligands mobilizes zinc, while reduction of the oxidized ligands enhances zinc binding, providing redox control over the availability of zinc ions. Some zinc proteins are redox sensors, in which zinc release is coupled to conformational changes that control varied functions such as enzymatic activity, binding interactions, and molecular chaperone activity. Whereas the released zinc ion in redox sensors has no known function, the redox signal is transduced to specific and sensitive zinc signals in redox transducers. Released zinc can bind to sites on other proteins and modulate signal transduction, generation of metabolic energy, mitochondrial function, and gene expression. The paradigm of such redox transducers is the zinc protein metallothionein, which, together with its apoprotein, thionein, functions at a central node in cellular signaling by redistributing cellular zinc, presiding over the availability of zinc, and interconverting redox and zinc signals. In this regard, the transduction of nitric oxide (NO) signals into zinc signals by metallothionein has received particular attention. It appears that redox-inert zinc has been chosen to control some aspects of cellular thiol/disulfide redox metabolism. Tight control of zinc is essential for redox homeostasis because both increases and decreases of cellular zinc elicit oxidative stress. Depending on its availability, zinc can be cytoprotective as a pro-antioxidant or cytotoxic as a pro-oxidant. Any condition with acute or chronic oxidative stress is expected to perturb zinc homeostasis.