Structure formation in the C terminus of type III collagen guides disulfide cross-linking

Green biomanufacturing in recombinant collagen biosynthesis: trends and selection in various expression systems

Collagen, classically derived from animal tissue, is an all-important protein material widely used in biomedical materials, cosmetics, fodder, food, etc. The production of recombinant collagen through different biological expression systems using bioengineering techniques has attracted significant interest in consideration of increasing market demand and the process complexity of extraction. Green biomanufacturing of recombinant collagen has become one of the focus topics. While the bioproduction of recombinant collagens (type I, II, III, etc.) has been commercialized in recent years, the biosynthesis of recombinant collagen is extremely challenging due to protein immunogenicity, yield, degradation, and other issues. The rapid development of synthetic biology allows us to perform a heterologous expression of proteins in diverse expression systems, thus optimizing the production and bioactivities of recombinant collagen. This review describes the research progress in the bioproduction of recombinant collagen over the past two decades, focusing on different expression systems (prokaryotic organisms, yeasts, plants, insects, mammalian and human cells, etc.). We also discuss the challenges and future trends in developing market-competitive recombinant collagens.

Evaluation of IR and Raman spectroscopic markers of human collagens: Insides for indicating colorectal carcinogenesis

Vibrational spectroscopic methods are widely used in the molecular diagnostics of carcinogenesis. Collagen, a component of connective tissue, plays a special role as a biochemical marker of pathological changes in tissues. The vibrational bands of collagens are very promising to distinguish between normal colon tissue, benign and malignant colon polyps. Differences in these bands indicate changes in the amount, structure, conformation and the ratio between the individual structural forms (subtypes) of this protein. The screening of specific collagen markers of colorectal carcinogenesis was carried out based on the FTIR and Raman (λ_ex 785 nm) spectra of colon tissue samples and purified human collagens. It was found that individual types of human collagens showed significant differences in their vibrational spectra, and specific spectral markers were found for them. These collagen bands were assigned to specific vibrations in the polypeptide backbone, amino acid side chains and carbohydrate moieties. The corresponding spectral regions for colon tissues and colon polyps were investigated for the contribution of collagen vibrations. Mentioned spectral differences in collagen spectroscopic markers could be of interest for early ex vivo diagnosis of colorectal carcinoma if combine vibrational spectroscopy and colonoscopy.

Supramolecular helical self-assembly of small peptides

In this highlight, we describe the construction of supramolecular single/double/triple-helical assemblies from small di/tri/tetrapeptides and their applications.

Application of ultrasound treatment in chicken gizzards tenderization: Effects on muscle fiber and connective tissue

The tenderizing effect of different ultrasound treatments on the characteristics of muscle fibers and connective tissue of chicken gizzard was investigated. It could be concluded that the shear force and muscle fiber diameter of the sample treated with ultrasound for 500 W/30 min were decreased by 27.1% and 26.2%, respectively, while the myofibril fragmentation index (MFI) was increased by 238.1% than the control. More importantly, the contents of hydroxylysine pyridinoline and lysine pyridinoline of the samples treated with ultrasound for 500 W/30 min were 23.1% and 40.5% lower than those of the control. Tenderizing effect of 500 W/30 min sample on thermal stability was verified from the decrease in transition temperature (Tmax) (10.7%) and enthalpy (ΔH) (21.7%) of collage compared with the control. In general, proper ultrasound treatment could effectively improve the tenderness of gizzard, and 500 W/30 min had the best tenderization effect. Therefore, the treatment of ultrasound was considered as a promising and efficient technique in meat processing, especially for the meat tenderization.

Beauty from within: Oral administration of a sulfur-containing supplement methylsulfonylmethane improves signs of skin ageing

Abstract. Background: Methylsulfonylmethane (MSM) is an organosulfur compound with known benefits for joint health, sports nutrition, immune function, and anti‐aging formulations and is gaining popularity as a nutritional supplement for the support of hair, skin and nails. Methods: The study was conducted in two steps; in Part I (pilot study) a panel of 20 participants ingested either 3 g a day of MSM or placebo capsules for 16 weeks. Visual and subject self assessment of wrinkles and skin texture as the predominant sign of ageing was observed. In Part II (dose-response study), 63 participants ingested either 1 g or 3 g per day of MSM for 16 weeks. Expert clinical grading, instrumental measurements and consumer perception was used to evaluate skin conditions like lines and wrinkles. Additionally, instrumentational analysis was conducted using corneometer and cutometer for investigation of skin hydration, firmness and elasticity. Results: Part I of the study clearly indicates that oral ingestion of MSM (3 g/d) reduces signs of ageing like facial wrinkles ( p < 0.05) and skin roughness ( p < 0.05) as compared to placebo. Detailed analysis in Part II instrumentation assessments showed a significant ( p < 0.05) improvement from baseline in the severity of facial wrinkles, as well as improved skin firmness, elasticity and hydration with MSM. Some of these parameters exhibited a good dose-response indicating that the higher (3 g/d) of the supplement was more effective than the lower dose of 1 g/d, but generally the lower dose of 1 g/d appeared to be sufficiently effective in reducing the facial signs of ageing. Conclusion: This study indicated that MSM is effective in reducing visual signs of skin ageing even at a low dose of 1 g/d.

Self-assemble peptide biomaterials and their biomedical applications

Inspired by self-assembling peptides found in native proteins, deliberately designed engineered peptides have shown outstanding biocompatibility, biodegradability, and extracellular matrix-mimicking microenvironments. Assembly of the peptides can be triggered by external stimuli, such as electrolytes, temperature, and pH. The formation of nanostructures and subsequent nanocomposite materials often occur under physiological conditions. The respective properties of side chains in each amino acids provide numerous sites for chemical modification and conjugation choices of the peptides, enabling various resulting supramolecular nanostructures and hydrogels with adjustable mechanical and physicochemical properties. Moreover, additional functionalities can be easily induced into the hydrogels, including shear-thinning, bioactivity, self-healing, and shape memory. It further broaden the scope of application of self-assemble peptide materials. This review outlines designs of self-assembly peptide (β-sheet, α-helix, collagen-like peptides, elastin-like polypeptides, and peptide amphiphiles) with potential additional functionalities and their biomedical applications in bioprinting, tissue engineering, and drug delivery.

Type III collagen (COL3A1): Gene and protein structure, tissue distribution, and associated diseases

Collagen alpha-1(III) chain, also known as the alpha 1 chain of type III collagen, is a protein that in humans is encoded by the COL3A1 gene. Three alpha 1 chains are required to form the type III collagen molecule which has a long triple-helical domain. Type III collagen, an extracellular matrix protein, is synthesized by cells as a pre-procollagen. It is found as a major structural component in hollow organs such as large blood vessels, uterus and bowel. Other functions of type III collagen include interaction with platelets in the blood clotting cascade and it is also an important signaling molecule in wound healing. Mutations in the COL3A1 gene cause the vascular type of Ehlers-Danlos syndrome (vEDS; OMIM 130050). It is the most serious form of EDS, since patients often die suddenly due to a rupture of large arteries. Inactivation of the murine Col3a1 gene leads to a shorter life span in homozygous mutant mice. The mice die prematurely from a rupture of major arteries mimicking the human vEDS phenotype. The biochemical and cellular effects of COL3A1 mutations have been studied extensively. Most of the glycine mutations lead to the synthesis of type III collagen with reduced thermal stability, which is more susceptible for proteinases. Intracellular accumulation of this normally secreted protein is also found. Ultrastructural analyses have demonstrated dilated rough endoplasmic reticulum and changes in the diameter of collagen fibers. Other clinical conditions associated with type III collagen are several types of fibroses in which increased amounts of type III collagen accumulate in the target organs.

Simple MD-based model for oxidative folding of peptides and proteins

Significant strides have been recently made to fold peptides and small proteins in silico using MD simulations. However, facilities are currently lacking to include disulfide bonding in the MD models of protein folding. To address this problem, we have developed a simple empirical protocol to model formation of disulfides, which is perturbation-free, retains the same speed as conventional MD simulations and allows one to control the reaction rate. The new protocol has been tested on 15-aminoacid peptide guanylin containing four cysteine residues; the net simulation time using Amber ff14SB force field was 61 μs. The resulting isomer distribution is in qualitative agreement with experiment, suggesting that oxidative folding of guanylin in vitro occurs under kinetic control. The highly stable conformation of the so-called isomer 2(B) has been obtained for full-length guanylin, which is significantly different from the poorly ordered structure of the truncated peptide PDB ID 1GNB. In addition, we have simulated oxidative folding of guanylin within the 94-aminoacid prohormone proguanylin. The obtained structure is in good agreement with the NMR coordinates 1O8R. The proposed modeling strategy can help to explore certain fundamental aspects of protein folding and is potentially relevant for manufacturing of synthetic peptides and recombinant proteins.

Thermoresponsive Elastin-b-Collagen-Like Peptide Bioconjugate Nanovesicles for Targeted Drug Delivery to Collagen-Containing Matrices

Over the past few decades, (poly)peptide block copolymers have been widely employed in generating well-defined nanostructures as vehicles for targeted drug delivery applications. We previously reported the assembly of thermoresponsive nanoscale vesicles from an elastin-b-collagen-like peptide (ELP-CLP). The vesicles were observed to dissociate at elevated temperatures, despite the LCST-like behavior of the tethered ELP domain, which is suggested to be triggered by the unfolding of the CLP domain. Here, the potential of using the vesicles as drug delivery vehicles for targeting collagen-containing matrices is evaluated. The sustained release of an encapsulated model drug was achieved over a period of 3 weeks, following which complete release could be triggered via heating. The ELP-CLP vesicles show strong retention on a collagen substrate, presumably through collagen triple helix interactions. Cell viability and proliferation studies using fibroblasts and chondrocytes suggest that the vesicles are highly cytocompatible. Additionally, essentially no activation of a macrophage-like cell line is observed, suggesting that the vesicles do not initiate an inflammatory response. Endowed with thermally controlled delivery, the ability to bind collagen, and excellent cytocompatibility, these ELP-CLP nanovesicles are suggested to have significant potential in the controlled delivery of drugs to collagen-containing matrices and tissues.

Glycoproteins functionalized natural and synthetic polymers for prospective biomedical applications: A review

Glycoproteins have multidimensional properties such as biodegradability, biocompatibility, non-toxicity, antimicrobial and adsorption properties; therefore, they have wide range of applications. They are blended with different polymers such as chitosan, carboxymethyl cellulose (CMC), polyvinyl pyrrolidone (PVP), polycaprolactone (PCL), heparin, polystyrene fluorescent nanoparticles (PS-NPs) and carboxyl pullulan (PC) to improve their properties like thermal stability, mechanical properties, resistance to pH, chemical stability and toughness. Considering the versatile charateristics of glycoprotein based polymers, this review sheds light on synthesis and characterization of blends and composites of glycoproteins, with natural and synthetic polymers and their potential applications in biomedical field such as drug delivery system, insulin delivery, antimicrobial wound dressing uses, targeting of cancer cells, development of anticancer vaccines, development of new biopolymers, glycoproteome research, food product and detection of dengue glycoproteins. All the technical scientific issues have been addressed; highlighting the recent advancement.

Dynamic Formation and Breaking of Disulfide Bonds in Molecular Dynamics Simulations with the UNRES Force Field

Many proteins contain disulfide bonds that are usually essential for maintaining function and a stable structure. Several algorithms attempt to predict the arrangement of disulfide bonds in the context of protein structure prediction, but none can simulate the entire process of oxidative folding, including dynamic formation and breaking of disulfide bonds. In this work, a potential function developed to model disulfide bonds is coupled with the united-residue (UNRES) force field, and used in both canonical and replica exchange molecular dynamics simulations to produce complete oxidative folding pathways. The potential function is obtained by introducing a transition barrier that separates the bonded and nonbonded states of the half-cystine residues. Tests on several helical proteins show that improved predictions are obtained when dynamic disulfide-bond formation and breaking are considered. The effect of the disulfide bonds on the folding kinetics is also investigated, particularly their role in stabilizing folding intermediates, resulting in slower folding.

Thermoresponsive self-assembly of nanostructures from a collagen-like peptide-containing diblock copolymer

Temperature-triggered formation of nanostructures with distinct biological activity offers opportunities in selective modification of matrices and in drug delivery. Toward these ends, diblock polymers comprising poly(diethylene glycol methyl ether methacrylate) (PDEGMEMA) conjugated to a triple helix-forming collagen-like peptide were produced. Triggered by the collapse of the thermoresponsive domain above its LCST, the conjugate undergoes a reversible transition in aqueous solution to form well-defined nanovesicles with diameters of approximately 100 nm, with a transition temperature of 37 °C. The incorporation of CLP domains in these nanostructures may offer opportunities for the selective targeting of collagen-containing matrices.

The cysteine-rich region of type VII collagen is a cystine knot with a new topology

Collagens are a group of extracellular matrix proteins with essential functions for skin integrity. Anchoring fibrils are made of type VII collagen (Col7) and link different skin layers together: the basal lamina and the underlying connective tissue. Col7 has a central collagenous domain and two noncollagenous domains located at the N and C terminus (NC1 and NC2), respectively. A cysteine-rich region of hitherto unknown function is located at the transition of the NC1 domain to the collagenous domain. A synthetic model peptide of this region was investigated by CD and NMR spectroscopy. The peptide folds into a collagen triple helix, and the cysteine residues form disulfide bridges between the different strands. The eight cystine knot topologies that are characterized by exclusively intermolecular disulfide bridges have been analyzed by molecular modeling. Two cystine knots are energetically preferred; however, all eight disulfide bridge arrangements are essentially possible. This novel cystine knot is present in type IX collagen, too. The conserved motif of the cystine knot is CX3CP. The cystine knot is N-terminal to the collagen triple helix in both collagens and therefore probably impedes unfolding of the collagen triple helix from the N terminus.

Structural variations in articular cartilage matrix are associated with early-onset osteoarthritis in the spondyloepiphyseal dysplasia congenita (sedc) mouse

Heterozgyous spondyloepiphyseal dysplasia congenita (sedc/+) mice expressing a missense mutation in col2a1 exhibit a normal skeletal morphology but early-onset osteoarthritis (OA). We have recently examined knee articular cartilage obtained from homozygous (sedc/sedc) mice, which express a Stickler-like phenotype including dwarfism. We examined sedc/sedc mice at various levels to better understand the mechanistic process resulting in OA. Mutant sedc/sedc, and control (+/+) cartilages were compared at two, six and nine months of age. Tissues were fixed, decalcified, processed to paraffin sections, and stained with hematoxylin/eosin and safranin O/fast green. Samples were analyzed under the light microscope and the modified Mankin and OARSI scoring system was used to quantify the OA-like changes. Knees were stained with 1C10 antibody to detect the presence and distribution of type II collagen. Electron microscopy was used to study chondrocyte morphology and collagen fibril diameter. Compared with controls, mutant articular cartilage displayed decreased fibril diameter concomitant with increases in size of the pericellular space, Mankin and OARSI scores, cartilage thickness, chondrocyte clustering, proteoglycan staining and horizontal fissuring. In conclusion, homozygous sedc mice are subject to early-onset knee OA. We conclude that collagen in the mutant’s articular cartilage (both heterozygote and homozygote) fails to provide the normal meshwork required for matrix integrity and overall cartilage stability.

The NC2 domain of type IX collagen determines the chain register of the triple helix

Precise mapping and unraveling the mechanism of interaction or degradation of a certain type of collagen triple helix requires the generation of short and stable collagenous fragments. This is a great challenge especially for hetero-trimeric collagens, where chain composition and register (stagger) are important factors. No system has been reported that can be efficiently used to generate a natural collagenous fragment with exact chain composition and desired chain register. The NC2 domain (only 35-50 residues) of FACIT collagens is a potent trimerization domain. In the case of type IX collagen it provides the efficient selection and hetero-trimerization of three distinct chains. The ability of the NC2 domain to determine the chain register of the triple helix is studied. We generated three possible sequence combinations (α1α1α2, α1α2α1, α2α1α1) of a type I collagen fragment (the binding region for the von Willebrand factor A3 domain) attached to the NC2 domain. In addition, two control combinations were produced that constitute homo-trimers of (α1)(3) or (α2)(3). For the hetero-trimeric constructs, α1α1α2 demonstrated a higher melting temperature than the other two. Binding experiments with the von Willebrand factor A3 domain revealed the homo-trimer of (α1)(3) as the strongest binding construct, whereas the homo-trimer of (α2)(3) showed no binding. For hetero-trimers, α1α1α2 was found to be the strongest binding construct. Differences in thermal stability and binding to the A3 domain unambiguously demonstrate that the NC2 domain of type IX collagen determines not only the chain composition but also the chain register of the adjacent triple helix.

Kinetic and thermodynamic analysis of the conformational folding process of SS-reduced bovine pancreatic ribonuclease A using a selenoxide reagent with high oxidizing ability

Redox-coupled folding pathways of bovine pancreatic ribonuclease A (RNase A) with four intramolecular disulfide (SS) bonds comprise three phases: (I) SS formation to generate partially oxidized intermediate ensembles with no rigid folded structure; (II) SS rearrangement from the three SS intermediate ensemble (3S) to the des intermediates having three native SS linkages; (III) final oxidation of the last native SS linkage to generate native RNase A. We previously demonstrated that DHS^ox, a water-soluble selenoxide reagent for rapid and quantitative SS formation, allows clear separation of the three folding phases. In this study, the main conformational folding phase (phase II) has been extensively analyzed at pH 8.0 under a wide range of temperatures (5–45 °C), and thermodynamic and kinetic parameters for the four des intermediates were determined. The free-energy differences (ΔG) as a function of temperature suggested that the each SS linkage has different thermodynamic and kinetic roles in stability of the native structure. On the other hand, comparison of the rate constants and the activation energies for 3S → des with those reported for the conformational folding of SS-intact RNase A suggested that unfolded des species (desU) having three native SS linkages but not yet being folded are involved in very small amounts (<1%) in the 3S intermediate ensemble and the desU species would gain the native-like structures via X-Pro isomerization like SS-intact RNase A. It was revealed that DHS^ox is useful for kinetic and thermodynamic analysis of the conformational folding process on the oxidative folding pathways of SS-reduced proteins.

Improved cellularization and angiogenesis using collagen scaffolds chemically conjugated with vascular endothelial growth factor

Much research has focused on developing vascular endothelial growth factor (VEGF) delivery systems to enhance angiogenesis in wound repair and in tissue engineering. Collagen can be used as a delivery system because of its biocompatibility, but its fast degradation rate and limited affinity with growth factors are disadvantageous for maintaining a sufficient growth factor concentration at injury sites. To enhance VEGF binding to collagen scaffolds and reduce the collagen degradation rate we found a simple way to modify porous collagen scaffolds by chemical addition of sulfhydryl groups, which then allow both cross-linking of the collagen fibers with each other and the immobilization of more VEGF in the scaffold after treatment with sulfo-SMCC. We demonstrated that cross-linking led to a slower degradation rate of the collagen scaffolds, while cellularization was improved by both cross-linking and the presence of VEGF. On the other hand, angiogenesis was increased only moderately by cross-linking, but significantly more by the presence of immobilized VEGF. We conclude that collagen scaffolds chemically conjugated to VEGF by Traut's reagent and sulfo-SMCC is an effective delivery system in wound repair and tissue engineering.

The NC2 domain of collagen IX provides chain selection and heterotrimerization

The mechanism of chain selection and trimerization of fibril-associated collagens with interrupted triple helices (FACITs) differs from that of fibrillar collagens that have special C-propeptides. We recently showed that the second carboxyl-terminal non-collagenous domain (NC2) of homotrimeric collagen XIX forms a stable trimer and substantially stabilizes a collagen triple helix attached to either end. We then hypothesized a general trimerizing role for the NC2 domain in other FACITs. Here we analyzed the NC2 domain of human heterotrimeric collagen IX, the only member of FACITs with all three chains encoded by distinct genes. Upon oxidative folding of equimolar amounts of the alpha1, alpha2, and alpha3 chains of NC2, a stable heterotrimer with a disulfide bridge between alpha1 and alpha3 chains is formed. Our experiments show that this heterotrimerization domain can stabilize a short triple helix attached at the carboxyl-terminal end and allows for the proper oxidation of the cystine knot of type III collagen after the short triple helix.

Supramolecular assembly of electrostatically stabilized, hydroxyproline-lacking collagen-mimetic peptides

The mechanical and biological functions of the native collagens remain an inspiration in materials design, but widespread application of de novo collagens has been limited in part by the need for hydroxylated proline in the formation of stable triple helical structures. To address this continued need and to expand the potential for recombinant expression of functional, hydroxyproline-lacking collagen-mimetic peptides, we have designed a hydrophilic, nonrepetitive, and thermally stable collagen-mimetic peptide via the incorporation of triple-helix-stabilizing charged triplets. The peptide sequence is also equipped with a type III-collagen-mimetic cystine knot at the C-terminus to facilitate covalent cross-linking of the triple helix via simple air oxidation. Circular dichroic spectroscopy (CD) studies of this collagen-mimetic peptide revealed a typical, thermally stable, collagen triple helix signature with a weak positive maximum at 225 nm and a triple helix melting temperature (T(m)) of 35 and 43 degrees C for the reduced and oxidized forms, respectively. The thermal behavior was confirmed via analysis by differential scanning calorimetry. Interestingly, this hydroxyproline-lacking, collagen-mimetic peptide also assembles into nanorods and microfibrillar structures as observed via transmission electron microscopy. The identification and demonstrated useful collagen-mimetic properties of this peptide suggests important opportunities in the recombinant design of new collagen-based biomaterials.

Crystal structure of human collagen XVIII trimerization domain: A novel collagen trimerization Fold

Collagens contain a unique triple-helical structure with a repeating sequence -G-X-Y-, where proline and hydroxyproline are major constituents in X and Y positions, respectively. Folding of the collagen triple helix requires trimerization domains. Once trimerized, collagen chains are correctly aligned and the folding of the triple helix proceeds in a zipper-like fashion. Here we report the isolation, characterization, and crystal structure of the trimerization domain of human type XVIII collagen, a member of the multiplexin family. This domain differs from all other known trimerization domains in other collagens and exhibits a high trimerization potential at picomolar concentrations. Strong chain association and high specificity of binding are needed for multiplexins, which are present at very low levels.

Dynamic redox environment-intensified disulfide bond shuffling for protein refolding in vitro: molecular simulation and experimental validation

One challenge in protein refolding is to dissociate the non-native disulfide bonds and promote the formation of native ones. In this study, we present a coarse-grained off-lattice model protein containing disulfide bonds and simulate disulfide bond shuffling during the folding of this model protein. Introduction of disulfide bonds in the model protein led to enhanced conformational stability but reduced foldability in comparison to counterpart protein without disulfide bonds. The folding trajectory suggested that the model protein retained the two-step folding mechanism in terms of hydrophobic collapse and structural rearrangement. The disulfide bonds located in the hydrophobic core were formed before the collapsing step, while the bonds located on the protein surface were formed during the rearrangement step. While a reductive environment at the initial stage of folding favored the formation of native disulfide bonds in the hydrophobic core, an oxidative environment at a later stage of folding was required for the formation of disulfide bonds at protein surface. Appling a dynamic redox environment, that is, one that changes from reductive to oxidative, intensified disulfide bond shuffling and thus resulted in improved recovery of the native conformation. The above-mentioned simulation was experimentally validated by refolding hen-egg lysozyme at different urea concentrations and oxidized glutathione/reduced glutathione (GSSG/GSH) ratios, and an optimal redox environment, in terms of the GSSG to GSH ratio, was identified. The implementation of a dynamic redox environment by tuning the GSSG/GSH ratio further improved the refolding yield of lysozyme, as predicted by molecular simulation.

Trimerization and triple helix stabilization of the collagen XIX NC2 domain

The mechanisms of chain selection and assembly of fibril-associated collagens with interrupted triple helices (FACITs) must differ from that of fibrillar collagens, since they lack the characteristic C-propeptide. We analyzed two carboxyl-terminal noncollagenous domains, NC2 and NC1, of collagen XIX as potential trimerization units and found that NC2 forms a stable trimer and substantially stabilizes a collagen triple helix attached to either end. In contrast, the NC1 domain requires formation of an adjacent collagen triple helix to form interchain disulfide bridges. The NC2 domain of collagen XIX and probably of other FACITs is responsible for chain selection and trimerization.

Crystal structure of human type III collagen Gly991-Gly1032 cystine knot-containing peptide shows both 7/2 and 10/3 triple helical symmetries

Type III collagen is a critical collagen that comprises extensible connective tissue such as skin, lung, and the vascular system. Mutations in the type III collagen gene, COL3A1, are associated with the most severe forms of Ehlers-Danlos syndrome. A characteristic feature of type III collagen is the presence of a stabilizing C-terminal cystine knot. Crystal structures of collagen triple helices reported so far contain artificial sequences like (Gly-Pro-Pro)(n) or (Gly-Pro-Hyp)(n). To gain insight into the structural properties exhibited by the natural type III collagen triple helix, we synthesized, crystallized, and determined the structure of a 12-triplet repeating peptide containing the natural type III collagen sequence from residues 991 to 1032 including the C-terminal cystine knot region, to 2.3A resolution. This represents the longest collagen triple helical structure determined to date with a native sequence. Strikingly, the Gly(991)-Gly(1032) structure reveals that the central non-imino acid-containing region adopts 10/3 superhelical properties, whereas the imino acid rich N- and C-terminal regions adhere to a 7/2 superhelical conformation. The structure is consistent with two models for the cystine knot; however, the poor density for the majority of this region suggests that multiple conformations may be adopted. The structure shows that the multiple non-imino acids make several types of direct intrahelical as well as interhelical contacts. The looser superhelical structure of the non-imino acid region of collagen triple helices combined with the extra contacts afforded by ionic and polar residues likely play a role in fibrillar assembly and interactions with other extracellular components.

The heterozygous disproportionate micromelia (dmm) mouse: morphological changes in fetal cartilage precede postnatal dwarfism and compared with lethal homozygotes can explain the mild phenotype

The disproportionate micromelia (Dmm) mouse has a mutation in the C-propeptide coding region of the Col2a1 gene that causes lethal dwarfism when homozygous (Dmm/Dmm) but causes only mild dwarfism observable approximately 1-week postpartum when heterozygous (Dmm/+). The purpose of this study was 2-fold: first, to analyze and quantify morphological changes that precede the expression of mild dwarfism in Dmm/+ animals, and second, to compare morphological alterations between Dmm/+ and Dmm/Dmm fetal cartilage that may correlate with the marked skeletal differences between mild and lethal dwarfism. Light and electron transmission microscopy were used to visualize structure of chondrocytes and extracellular matrix (ECM) of fetal rib cartilage. Both Dmm/+ and Dmm/Dmm fetal rib cartilage had significantly larger chondrocytes, greater cell density, and less ECM per unit area than +/+ littermates. Quantitative RT-PCR showed a decrease in aggrecan mRNA in Dmm/+ vs +/+ cartilage. Furthermore, the cytoplasm of chondrocytes in Dmm/+ and Dmm/Dmm cartilage was occupied by significantly more distended rough endoplasmic reticulum (RER) compared with wild-type chondrocytes. Fibril diameters and packing densities of +/+ and Dmm/+ cartilage were similar, but Dmm/Dmm cartilage showed thinner, sparsely distributed fibrils. These findings support the prevailing hypothesis that a C-propeptide mutation could interrupt the normal assembly and secretion of Type II procollagen trimers, resulting in a buildup of proalpha1(II) chains in the RER and a reduced rate of matrix synthesis. Thus, intracellular entrapment of proalpha1(II) seems to be primarily responsible for the dominant-negative effect of the Dmm mutation in the expression of dwarfism.

Natural and artificial cystine knots for assembly of homo- and heterotrimeric collagen models

Native collagens are molecules that are difficult to handle because of their high tendency towards aggregation and denaturation. It was discovered early on that synthetic collagenous peptides are more amenable to conformational characterization and thus can serve as useful models for structural and functional studies. Single-stranded collagenous peptides of high propensity to self-associate into triple-helical trimers were used for this purpose as well as interchain-crosslinked homotrimers assembled on synthetic scaffolds. With the growing knowledge of the biosynthetic pathways of natural collagens and the importance of their interchain disulfide crosslinks, which stabilize the triple-helical structure, native as well as de novo designed cystine knots have gained increasing attention in the assembly of triple-stranded collagen peptides. In addition, natural sequences of collagens were incorporated in order to biophysically characterize their functional epitopes. This review is focused on the methods developed over the years, and future perspectives for the production of collagen-mimicking synthetic and recombinant triple-helical homo- and heterotrimers.

Photocontrol of the collagen triple helix: synthesis and conformational characterization of bis-cysteinyl collagenous peptides with an azobenzene clamp

For the photomodulation of the collagen triple helix with an azobenzene clamp, we investigated various collagenous peptides consisting of ideal (Gly-Pro-Hyp) repeats and containing cysteine residues in various positions for a side chain-to-side chain crosslink with a suitable chromophore derivative. Comparative conformational analysis of these cysteine peptides indicated an undecarepeat peptide with two cysteine residues located in the central portion in i and i+7 positions and flanked by (Gly-Pro-Hyp) repeat sequences as the most promising for the cross-bridging experiments. In aqueous alcoholic solution the azobenzene-undecarepeat peptide formed a stable triple helix in equilibrium with the monomeric species as a trans-azobenzene isomer, whereas photoisomerization to the cis isomer leads to unfolding of at least part of the triple helix. Furthermore, the residual supercoiled structure acts like an intermolecular knot, thus making refolding upon cis-to-trans isomerization a concentration-independent fast event. Consequently, these photoswitchable collagenous systems should be well suited for time-resolved studies of folding/unfolding of the collagen triple helix under variable thermodynamic equilibria.

The coiled-coil domain structure of the Sin Nombre virus nucleocapsid protein

Hantaviruses can cause hemorrhagic fever with a renal syndrome and hantavirus pulmonary syndrome when transmitted to humans. The nucleocapsid protein of hantaviruses encapsidates viral genomic RNA and associates with transcription and replication complexes. Both the amino and carboxy termini of the nucleocapsid protein had been predicted to form trimers prior to the formation of the ribonucleoprotein. Crystal structures of amino-terminal fragments of the nucleocapsid protein showed the formation of intramolecular antiparallel coiled coils, but not intermolecular trimers. Thus, the amino-terminal part of the nucleocapsid protein is probably insufficient to initiate the trimerization of the full-length molecule.

Collagen triple-helix formation in all-trans chains proceeds by a nucleation/growth mechanism with a purely entropic barrier

Collagen consists of repetitive Gly-Xaa-Yaa tripeptide units with proline and hydroxyproline frequently found in the Xaa and Yaa position, respectively. This sequence motif allows the formation of a highly regular triple helix that is stabilized by steric (entropic) restrictions in the constituent polyproline-II-helices and backbone hydrogen bonds between the three strands. Concentration-dependent association reactions and slow prolyl isomerization steps have been identified as major rate-limiting processes during collagen folding. To gain information on the dynamics of triple-helix formation in the absence of these slow reactions, we performed stopped-flow double-jump experiments on cross-linked fragments derived from human type III collagen. This technique allowed us to measure concentration-independent folding kinetics starting from unfolded chains with all peptide bonds in the trans conformation. The results show that triple-helix formation occurs with a rate constant of 113 +/- 20 s(-1) at 3.7 degrees C and is virtually independent of temperature, indicating a purely entropic barrier. Comparison of the effect of guanidinium chloride on folding kinetics and stability reveals that the rate-limiting step is represented by bringing 10 consecutive tripeptide units (3.3 per strand) into a triple-helical conformation. The following addition of tripeptide units occurs on a much faster time scale and cannot be observed experimentally. These results support an entropy-controlled zipper-like nucleation/growth mechanism for collagen triple-helix formation.

Orientation within the exosporium and structural stability of the collagen-like glycoprotein BclA of Bacillus anthracis

Bacillus anthracis spores, which cause anthrax, are enclosed by an exosporium consisting of a basal layer and an external hair-like nap. The filaments of the nap are composed of BclA, a glycoprotein containing distinct N-terminal (NTD) and C-terminal (CTD) domains separated by an extended collagen-like central region. In this study, we used immunogold electron microscopy to show that the CTD of BclA forms the distal end of each filament of the hair-like nap, indicating that the NTD is attached to the basal layer. Ten randomly chosen anti-BclA monoclonal antibodies, raised against spores or exosporium, reacted with the CTD, consistent with its exterior location. We showed that recombinant BclA (rBclA), encoded by the B. anthracis Sterne strain and synthesized in Escherichia coli, forms a collagen-like triple helix as judged by collagenase sensitivity and circular dichroism spectroscopy. In contrast, native BclA in spores was resistant to collagenase digestion. Thermal denaturation studies showed that the collagen-like region of rBclA exhibited a melting temperature (T(m)) of 37 degrees C, like mammalian collagen. However, rBclA trimers exhibited T(m) values of 84 degrees C and 95 degrees C in buffer with and without sodium dodecyl sulfate, respectively. CTD trimers exhibited the same T(m) values, indicating that the high temperature and detergent resistances of rBclA were due to strong CTD interactions. We observed that CTD trimers are resistant to many proteases and readily form large crystalline sheets. Structural data indicate that the CTD is composed of multiple beta strands. Taken together, our results suggest that BclA and particularly its CTD form a rugged shield around the spore.

Synthesis of single- and multiple-stranded cystine-rich peptides

The large abundance of bioactive single- and multiple-stranded cystine-rich peptides in nature has fostered the development of orthogonal thiol-protection schemes and of efficient chemistries for regioselective disulfide formation in synthetic replica for decades. In parallel to these entirely synthetic strategies, an increased knowledge of oxidative refolding mechanisms of proteins has been accumulated, and the collective experience with air oxidation of cysteine-rich peptides into their native disulfide frameworks have largely confirmed Anfinsen's principle of the self-assembly of polypeptide chains. In fact, a continuously growing number of cysteine-rich bioactive peptides from the most diverse sources and with differing cysteine patterns were found to retain the critical sequence-encoded structural information for correct oxidative folding into the native structures as dominant isomers, although in the biosynthetic pathways the mature peptide forms are mostly generated by posttranslational processing of folded precursors. Such self-assembly processes can be optimized by opportune manipulation of the experimental conditions or by induction of productive intermediates. But there are also numerous cases where folding and disulfide formation are thermodynamically not coupled and where the application of a defined succession of regioselective cysteine pairings still represents the method of choice to install the desired native or non-native cystine frameworks. Among our contributions to the state of the art in the synthesis of cystine-rich peptides, we have mainly addressed the induction of correct oxidative refolding of single-stranded cysteine-rich peptides into their native structures by the use of selenocysteine and suitable strategies for disulfide-mediated assembly of monomers into defined oligomers as mimics of homo- and heterotrimeric collagens as a synthetic approach for the development of new biomaterials.

Adenovirus Fibre Shaft Sequences Fold into the Native Triple Beta-Spiral Fold when N-terminally Fused to the Bacteriophage T4 Fibritin Foldon Trimerisation Motif

Adenovirus fibres are trimeric proteins that consist of a globular C-terminal domain, a central fibrous shaft and an N-terminal part that attaches to the viral capsid. In the presence of the globular C-terminal domain, which is necessary for correct trimerisation, the shaft segment adopts a triple beta-spiral conformation. We have replaced the head of the fibre by the trimerisation domain of the bacteriophage T4 fibritin, the foldon. Two different fusion constructs were made and crystallised, one with an eight amino acid residue linker and one with a linker of only two residues. X-ray crystallographic studies of both fusion proteins shows that residues 319-391 of the adenovirus type 2 fibre shaft fold into a triple beta-spiral fold indistinguishable from the native structure, although this is now resolved at a higher resolution of 1.9 A. The foldon residues 458-483 also adopt their natural structure. The intervening linkers are not well ordered in the crystal structures. This work shows that the shaft sequences retain their capacity to fold into their native beta-spiral fibrous fold when fused to a foreign C-terminal trimerisation motif. It provides a structural basis to artificially trimerise longer adenovirus shaft segments and segments from other trimeric beta-structured fibre proteins. Such artificial fibrous constructs, amenable to crystallisation and solution studies, can offer tractable model systems for the study of beta-fibrous structure. They can also prove useful for gene therapy and fibre engineering applications.

The Structure of the Cys-rich Terminal Domain of Hydra Minicollagen, Which Is Involved in Disulfide Networks of the Nematocyst Wall

The minicollagens found in the nematocysts of Hydra constitute a family of invertebrate collagens with unusual properties. They share a common modular architecture with a central collagen sequence ranging from 14 to 16 Gly-X-Y repeats flanked by polyproline/hydroxyproline stretches and short terminal domains that show a conserved cysteine pattern (CXXXCXXXCXXX-CXXXCC). The minicollagen cysteine-rich domains are believed to function in a switch of the disulfide connectivity from intra- to intermolecular bonds during maturation of the capsule wall. The solution structure of the C-terminal fragment including a minicollagen cysteine-rich domain of minicollagen-1 was determined in two independent groups by 1H NMR. The corresponding peptide comprising the last 24 residues of the molecule was produced synthetically and refolded by oxidation under low protein concentrations. Both presented structures are identical in their fold and disulfide connections (Cys2-Cys18, Cys6-Cys14, and Cys10-Cys19) revealing a robust structural motif that is supposed to serve as the polymerization module of the nematocyst capsule.

Hydroxylation-induced stabilization of the collagen triple helix. Acetyl-(glycyl-4(R)-hydroxyprolyl-4(R)-hydroxyprolyl)(10)-NH(2) forms a highly stable triple helix

The collagen triple helix is one of the most abundant protein motifs in animals. The structural motif of collagen is the triple helix formed by the repeated sequence of -Gly-Xaa-Yaa-. Previous reports showed that H-(Pro-4(R)Hyp-Gly)(10)-OH (where '4(R)Hyp' is (2S,4R)-4-hydroxyproline) forms a trimeric structure, whereas H-(4(R)Hyp-Pro-Gly)(10)-OH does not form a triple helix. Compared with H-(Pro-Pro-Gly)(10)-OH, the melting temperature of H-(Pro-4(R)Hyp-Gly)(10)-OH is higher, suggesting that 4(R)Hyp in the Yaa position has a stabilizing effect. The inability of triple helix formation of H-(4(R)Hyp-Pro-Gly)(10)-OH has been explained by a stereoelectronic effect, but the details are unknown. In this study, we synthesized a peptide that contains 4(R)Hyp in both the Xaa and the Yaa positions, that is, Ac-(Gly-4(R)Hyp-4(R)Hyp)(10)-NH(2) and compared it to Ac-(Gly-Pro-4(R)Hyp)(10)-NH(2), and Ac-(Gly-4(R)Hyp-Pro)(10)-NH(2). Ac-(Gly-4(R)Hyp-4(R)Hyp)(10)-NH(2) showed a polyproline II-like circular dichroic spectrum in water. The thermal transition temperatures measured by circular dichroism and differential scanning calorimetry were slightly higher than the values measured for Ac-(Gly-Pro-4(R)Hyp)(10)-NH(2) under the same conditions. For Ac-(Gly-4(R)Hyp-4(R)Hyp)(10)-NH(2), the calorimetric and the van't Hoff transition enthalpy DeltaH were significantly smaller than that of Ac-(Gly-Pro-4(R)Hyp)(10)-NH(2). We postulate that the denatured states of the two peptides are significantly different, with Ac-(Gly-4(R)Hyp-4(R)Hyp)(10)-NH(2) forming a more polyproline II-like structure instead of a random coil. Two-dimensional nuclear Overhauser effect spectroscopy suggests that the triple helical structure of Ac-(Gly-4(R)Hyp-4(R)Hyp)(10)-NH(2) is more flexible than that of Ac-(Gly-Pro-4(R)Hyp)(10)-NH(2). This is confirmed by the kinetics of amide (1)H exchange with solvent deuterium of Ac-(Gly-4(R)Hyp-4(R)Hyp)(10)-NH(2), which is faster than that of Ac-(Gly-Pro-4(R)Hyp)(10)-NH(2). The higher transition temperature of Ac-(Gly-4(R)Hyp-4(R)Hyp)(10)-NH(2), can be explained by the higher trans/cis ratio of the Gly-4(R)Hyp peptide bonds than that of the Gly-Pro bonds, and this ratio compensates for the weaker interchain hydrogen bonds.