The bacterial protein-translocation complex: SecYEG dimers associate with one or two SecA molecules

SecA: a potential antimicrobial target

There is a consensus in the medical profession of the pressing need for novel antimicrobial agents due to issues related to drug resistance. In practice, solutions to this problem to a large degree lie with the identification of new and vital targets in bacteria and subsequently designing their inhibitors. We consider SecA a very promising antimicrobial target. In this review, we compile and analyze information available on SecA to show that inhibition of SecA has a multitude of consequences. Furthermore, we discuss issues critical to the design and evaluation of SecA inhibitors.

Cryo-electron microscopic structure of SecA protein bound to the 70S ribosome

SecA is an ATP-dependent molecular motor pumping secretory and outer membrane proteins across the cytoplasmic membrane in bacteria. SecA associates with the protein-conducting channel, the heterotrimeric SecYEG complex, in a so-called posttranslational manner. A recent study further showed binding of a monomeric state of SecA to the ribosome. However, the true oligomeric state of SecA remains controversial because SecA can also form functional dimers, and high-resolution crystal structures exist for both the monomer and the dimer. Here we present the cryo-electron microscopy structures of Escherichia coli SecA bound to the ribosome. We show that not only a monomeric SecA binds to the ribosome but also that two copies of SecA can be observed that form an elongated dimer. Two copies of SecA completely surround the tunnel exit, providing a unique environment to the nascent polypeptides emerging from the ribosome. We identified the N-terminal helix of SecA required for a stable association with the ribosome. The structures indicate a possible function of the dimeric form of SecA at the ribosome.

Defining the solution state dimer structure of Escherichia coli SecA using Förster resonance energy transfer

The Sec machinery constitutes the major pathway for protein translocation in bacteria. SecA is thought to act as a molecular motor driving translocation of the preprotein across the membrane by repeated ATP-driven cycles of insertion and retraction at the translocon channel. SecA is predominately a dimer under physiological conditions; however, its oligomeric state during active protein translocation is still unresolved. Five SecA crystal structures have been determined, each displaying a different dimer interface, suggesting that SecA may adopt different dimer configurations. In this study, a Förster resonance energy transfer approach was utilized with nine functional monocysteine SecA mutants labeled with appropriate dyes to determine the predominant solution state dimer. Three different dye pairs allowed interprotomer distances ranging from 20 to 140 Å to be investigated. Comparison of 15 experimentally determined distances with those predicted from X-ray structures showed the greatest agreement with the Bacillus subtilis SecA antiparallel dimer structure [Hunt, J., Weinkauf, S., Henry, L., Fak, J. J., McNicholas, P., Oliver, D. B., and Deisenhfer, J. (2002) Science 297, 2018-2026]. The binding of two signal peptides to SecA was also examined to determine their effect on SecA dimer structure. We found that the SecA dimer is maintained upon peptide binding; however, the preprotein cross-linking domain (PPXD) and helical wing domain regions experience significant conformational changes, and the PPXD movement is greatly enhanced by binding of an extended signal peptide containing 19 additional residues. Modeling of an "open" antiparallel dimer structure suggests that binding of preprotein to SecA induces an activated open conformation suitable for binding to SecYEG.

Biogenesis of inner membrane proteins in Escherichia coli

The inner membrane proteome of the model organism Escherichia coli is composed of inner membrane proteins, lipoproteins and peripherally attached soluble proteins. Our knowledge of the biogenesis of inner membrane proteins is rapidly increasing. This is in particular true for the early steps of biogenesis - protein targeting to and insertion into the membrane. However, our knowledge of inner membrane protein folding and quality control is still fragmentary. Furthering our knowledge in these areas will bring us closer to understand the biogenesis of individual inner membrane proteins in the context of the biogenesis of the inner membrane proteome of Escherichia coli as a whole. This article is part of a Special Issue entitled: Biogenesis/Assembly of Respiratory Enzyme Complexes.

Characterization of multiprotein complexes of the Borrelia burgdorferi outer membrane vesicles

Among bacterial cell envelopes, the Borrelia burgdorferi outer membrane (OM) is structurally unique in that the identities of many protein complexes remain unknown; however, their characterization is the first step toward our understanding of membrane protein interactions and potential functions. Here, we used two-dimensional blue native/SDS-PAGE/mass spectrometric analysis for a global characterization of protein-protein interactions as well as to identify protein complexes in OM vesicles isolated from multiple infectious sensu stricto isolates of B. burgdorferi. Although we uncovered the existence of at least 10 distinct OM complexes harboring several unique subunits, the complexome is dominated by the frequent occurrence of a limited diversity of membrane proteins, most notably P13, outer surface protein (Osp) A, -B, -C, and -D and Lp6.6. The occurrence of these complexes and specificity of subunit interaction were further supported by independent two-dimensional immunoblotting and coimmunoprecipitation assays as well as by mutagenesis studies, where targeted depletion of a subunit member (P66) selectively abolished a specific complex. Although a comparable profile of the OM complexome was detected in two major infectious isolates, such as B31 and 297, certain complexes are likely to occur in an isolate-specific manner. Further assessment of protein complexes in multiple Osp-deficient isolates showed loss of several protein complexes but revealed the existence of additional complex/subunits that are undetectable in wild-type cells. Together, these observations uncovered borrelial antigens involved in membrane protein interactions. The study also suggests that the assembly process of OM complexes is specific and that the core or stabilizing subunits vary between complexes. Further characterization of these protein complexes including elucidation of their biological significance may shed new light on the mechanism of pathogen persistence and the development of preventative measures against the infection.

Quaternary structure of SecA in solution and bound to SecYEG probed at the single molecule level

Dual-color fluorescence-burst analysis (DCFBA) was applied to measure the quaternary structure and high-affinity binding of the bacterial motor protein SecA to the protein-conducting channel SecYEG reconstituted into lipid vesicles. DCFBA is an equilibrium technique that enables the direct observation and quantification of protein-protein interactions at the single molecule level. SecA binds to SecYEG as a dimer with a nucleotide- and preprotein-dependent dissociation constant. One of the SecA protomers binds SecYEG in a salt-resistant manner, whereas binding of the second protomer is salt sensitive. Because protein translocation is salt sensitive, we conclude that the dimeric state of SecA is required for protein translocation. A structural model for the dimeric assembly of SecA while bound to SecYEG is proposed based on the crystal structures of the Thermotoga maritima SecA-SecYEG and the Escherichia coli SecA dimer.

SecA, a remarkable nanomachine

Biological cells harbor a variety of molecular machines that carry out mechanical work at the nanoscale. One of these nanomachines is the bacterial motor protein SecA which translocates secretory proteins through the protein-conducting membrane channel SecYEG. SecA converts chemically stored energy in the form of ATP into a mechanical force to drive polypeptide transport through SecYEG and across the cytoplasmic membrane. In order to accommodate a translocating polypeptide chain and to release transmembrane segments of membrane proteins into the lipid bilayer, SecYEG needs to open its central channel and the lateral gate. Recent crystal structures provide a detailed insight into the rearrangements required for channel opening. Here, we review our current understanding of the mode of operation of the SecA motor protein in concert with the dynamic SecYEG channel. We conclude with a new model for SecA-mediated protein translocation that unifies previous conflicting data.

Structural studies and the assembly of the heptameric post-translational translocon complex

In Saccharomyces cerevisiae, some of the nascent chains can be post-translationally translocated into the endoplasmic reticulum through the heptameric post-translational translocon complex (post-translocon). This membrane-protein complex is composed of the protein-conducting channel and the tetrameric Sec62/63 complex. The Sec62/63 complex plays crucial roles in targeting of the signal recognition particle-independent protein substrate to the protein-conducting channel and in assembly of the post-translocon. Although the molecular mechanism of the post-translational translocation process has been well established, the structure of the post-translocon and how the channel and the Sec62/63 complex form the heptameric complex are largely uncharacterized. Here, we report a 20-Å resolution cryo-electron microscopy structure of the post-translocon. The purified post-translocon was found to have a mass of 287 kDa, which is consistent with the unit stoichiometry of the seven subunits as determined by a cysteine labeling experiment. We demonstrated that Triton X-100 dissociated the heptameric complex into three subcomplexes identified as the trimeric translocon Sec61-Sbh1-Sss1, the Sec63-Sec71-Sec72 trimer, and the heterotetramer Sec62-Sec63-Sec71-Sec72, respectively. Additionally, a role of the sixth cytosolic loop of Sec61 in assembly of the post-translocon was demonstrated. Mutations of conserved, positively charged amino acid residues in the loop caused decreased formation of the post-translocon. These studies provide the first architectural description of the yeast post-translocon.

The Sec translocase

The vast majority of proteins trafficking across or into the bacterial cytoplasmic membrane occur via the translocon. The translocon consists of the SecYEG complex that forms an evolutionarily conserved heterotrimeric protein-conducting membrane channel that functions in conjunction with a variety of ancillary proteins. For posttranslational protein translocation, the translocon interacts with the cytosolic motor protein SecA that drives the ATP-dependent stepwise translocation of unfolded polypeptides across the membrane. For the cotranslational integration of membrane proteins, the translocon interacts with ribosome-nascent chain complexes and membrane insertion is coupled to polypeptide chain elongation at the ribosome. These processes are assisted by the YidC and SecDF(yajC) complex that transiently interacts with the translocon. This review summarizes our current understanding of the structure-function relationship of the translocon and its interactions with ancillary components during protein translocation and membrane protein insertion. This article is part of a Special Issue entitled Protein translocation across or insertion into membranes.

Biogenesis of bacterial inner-membrane proteins

All cells must traffic proteins into and across their membranes. In bacteria, several pathways have evolved to enable protein transfer across the inner membrane, the periplasm, and the outer membrane. The major route of protein translocation in and across the cytoplasmic membrane is the general secretion pathway (Sec-pathway). The biogenesis of membrane proteins not only requires protein translocation but also coordinated targeting to the membrane beforehand and folding and assembly into their protein complexes afterwards to function properly in the cell. All these processes are responsible for the biogenesis of membrane proteins that mediate essential functions of the cell such as selective transport, energy conversion, cell division, extracellular signal sensing, and motility. This review will highlight the most recent developments on the structure and function of bacterial membrane proteins, focusing on the journey that integral membrane proteins take to find their final destination in the inner membrane.

The action of cardiolipin on the bacterial translocon

Cardiolipin is an ever-present component of the energy-conserving inner membranes of bacteria and mitochondria. Its modulation of the structure and dynamism of the bilayer impacts on the activity of their resident proteins, as a number of studies have shown. Here we analyze the consequences cardiolipin has on the conformation, activity, and localization of the protein translocation machinery. Cardiolipin tightly associates with the SecYEG protein channel complex, whereupon it stabilizes the dimer, creates a high-affinity binding surface for the SecA ATPase, and stimulates ATP hydrolysis. In addition to the effects on the structure and function, the subcellular distribution of the complex is modified by the cardiolipin content of the membrane. Together, the results provide rare and comprehensive insights into the action of a phospholipid on an essential transport complex, which appears to be relevant to a broad range of energy-dependent reactions occurring at membranes.

Biogenesis of membrane bound respiratory complexes in Escherichia coli

Escherichia coli is one of the preferred bacteria for studies on the energetics and regulation of respiration. Respiratory chains consist of primary dehydrogenases and terminal reductases or oxidases linked by quinones. In order to assemble this complex arrangement of protein complexes, synthesis of the subunits occurs in the cytoplasm followed by assembly in the cytoplasm and/or membrane, the incorporation of metal or organic cofactors and the anchoring of the complex to the membrane. In the case of exported metalloproteins, synthesis, assembly and incorporation of metal cofactors must be completed before translocation across the cytoplasmic membrane. Coordination data on these processes is, however, scarce. In this review, we discuss the various processes that respiratory proteins must undergo for correct assembly and functional coupling to the electron transport chain in E. coli. Targeting to and translocation across the membrane together with cofactor synthesis and insertion are discussed in a general manner followed by a review of the coordinated biogenesis of individual respiratory enzyme complexes. Lastly, we address the supramolecular organization of respiratory enzymes into supercomplexes and their localization to specialized domains in the membrane.

The transcriptional repressor RYBP is a natively unfolded protein which folds upon binding to DNA

RYBP (Ring1A and YY1 binding protein) is a zinc finger protein with an essential role during embryonic development, which binds transcriptional factors, Polycomb products, and mediators of apoptosis, suggesting roles in, apparently, unrelated functions. To investigate mechanisms underlying its association with functionally diverse partners, we set out to study its structural properties using a number of biophysical (fluorescence, circular dichroism, Fourier transform infrared, and NMR spectroscopies) and hydrodynamic (analytical ultracentrifugation, DOSY-NMR, and gel filtration chromatography) techniques. We find RYBP to be a noncompact protein with little residual secondary structure, lacking a well-defined tertiary structure. These observations are also supported by theoretical calculations using neural networks and pairwise energy content, suggesting that RYBP is a natively unfolded protein. In addition, structural studies on its binding to the C-terminal region of the Polycomb protein Ring1B or to DNA show conformational changes in the complexed RYBP, consistent with the acquisition of a folded structure. The data provide a structural explanation for RYBP engagement in functionally unrelated pathways by means of its assembly into various macromolecular complexes as an unstructured protein with the ability to acquire a well-structured fold due to its association with different partners.

Energy transduction in protein transport and the ATP hydrolytic cycle of SecA

The motor protein SecA drives the transport of polypeptides through the ubiquitous protein channel SecYEG. Changes in protein-nucleotide binding energy during the hydrolytic cycle of SecA must be harnessed to drive large conformational changes resulting in channel opening and vectorial substrate polypeptide transport. Here, we elucidate the ATP hydrolysis cycle of SecA from Escherichia coli by transient and steady-state methods. The basal ATPase activity of SecA is very slow with the release of ADP being some 600-fold slower than hydrolysis. Upon binding to SecYEG the release of ADP is stimulated but remains rate-limiting. ADP release is fastest in the fully coupled system when a substrate protein is being translocated; in this case hydrolysis and ADP release occur at approximately the same rate. The data imply that ADP dissociation from SecA is accompanied by a structural rearrangement that is strongly coupled to the protein interface and protein translocation through SecYEG.

Assembly of the translocase motor onto the preprotein-conducting channel

Bacterial protein secretion is catalysed by the SecYEG protein-conducting channel complexed with the SecA ATPase motor. To gain insight into the SecA-SecYEG interaction we used peptide arrays, thermodynamic quantification, mutagenesis and functional assays. Our data reveal that: (i) SecA binds with low affinity on several, peripheral, exposed SecYEG sites. This largely electrostatic association is modulated by temperature and nucleotides. (ii) Binding sites cluster in five major binding 'regions': three that are exclusively cytoplasmic and two that reach the periplasm. (iii) Both the N-terminal and c-terminal regions of SecA participate in binding interactions and share some sites. (iv) Several of these sites are essential for translocase catalysis. Our data provide residue-level dissection of the SecYEG-SecA interaction. Two models of assembly of SecA on dimeric SecYEG are discussed.

Structure and function of the bacterial Sec translocon

Bacteria and archaea possess a protein complex in the plasma membrane that governs protein secretion and membrane protein insertion. Eukaryotes carry homologues in the endoplasmic reticulum (ER) where they direct the same reaction. A combination of experiments conducted on the systems found in all three domains of life has revealed a great deal about protein translocation. The channel provides a route for proteins to pass through the hydrophobic barrier of the membrane, assisted by various partner proteins which maintain an unfolded state of the substrate, target it to the channel and provide the energy and mechanical drive required for transport. In bacteria, the post-translational reaction utilizes an ATPase that couples the free energy of ATP binding and hydrolysis to move the substrate through the protein pore. This review will draw on genetic, biochemical and structural findings in an account of our current understanding of this mechanism.

A large conformational change couples the ATP binding site of SecA to the SecY protein channel

In bacteria, the SecYEG protein translocation complex employs the cytosolic ATPase SecA to couple the energy of ATP binding and hydrolysis to the mechanical force required to push polypeptides through the membrane. The molecular basis of this energy transducing reaction is not well understood. A peptide-binding array has been employed to identify sites on SecYEG that interact with SecA. These results along with fluorescence spectroscopy have been exploited to characterise a long-distance conformational change that connects the nucleotide-binding fold of SecA to the transmembrane polypeptide channel in SecY. These movements are driven by binding of non-hydrolysable ATP analogues to a monomer of SecA in association with the SecYEG complex. We also determine that interaction with SecYEG simultaneously decreases the affinity of SecA for ATP and inhibitory magnesium, favouring a previously identified active state of the ATPase. Mutants of SecA capable of binding but not hydrolysing ATP do not elicit this conformationally active state, implicating residues of the Walker B motif in the early chain of events that couple ATP binding to the mobility of the channel.

Topology inversion of SecG is essential for cytosolic SecA-dependent stimulation of protein translocation

SecG, a subunit of the protein translocon, undergoes a cycle of topology inversion. To further examine the role of this topology inversion, we analyzed the activity of membrane vesicles carrying a SecG-PhoA fusion protein (SecG-PhoA inverted membrane vesicles (IMVs)). In the absence of externally added SecA, SecG-PhoA IMVs were as active in protein translocation as SecG(+) IMVs per SecA. Consistent with this observation, insertion of membrane-bound SecA into SecG-PhoA IMVs was normally observed. On the other hand, externally added SecA did not affect the activity of SecG-PhoA IMVs, but it caused >10-fold stimulation of the translocation activity of SecG(+) IMVs, indicating that the topology inversion of SecG, which cannot occur in SecG-PhoA IMVs, is essential for cytosolic SecA-dependent stimulation of protein translocation. SecG-PhoA IMVs generated a 46-kDa fragment of SecA upon trypsin treatment. The accumulation of this membrane-inserted SecA in the SecG-PhoA IMVs was responsible for the loss of the soluble SecA-dependent stimulation. Moreover, fixation of the inverted SecG topology was found to be dependent on soluble SecA. The dual functions of SecG in protein translocation will be discussed.

Sec- and Tat-mediated protein secretion across the bacterial cytoplasmic membrane--distinct translocases and mechanisms

In bacteria, two major pathways exist to secrete proteins across the cytoplasmic membrane. The general Secretion route, termed Sec-pathway, catalyzes the transmembrane translocation of proteins in their unfolded conformation, whereupon they fold into their native structure at the trans-side of the membrane. The Twin-arginine translocation pathway, termed Tat-pathway, catalyses the translocation of secretory proteins in their folded state. Although the targeting signals that direct secretory proteins to these pathways show a high degree of similarity, the translocation mechanisms and translocases involved are vastly different.

Protein Secretion and Membrane Insertion Systems in Gram-Negative Bacteria

In contrast to other organisms, gram-negative bacteria have evolved numerous systems for protein export. Eight types are known that mediate export across or insertion into the cytoplasmic membrane, while eight specifically mediate export across or insertion into the outer membrane. Three of the former secretory pathway (SP) systems, type I SP (ISP, ABC), IIISP (Fla/Path) and IVSP (Conj/Vir), can export proteins across both membranes in a single energy-coupled step. A fourth generalized mechanism for exporting proteins across the two-membrane envelope in two distinct steps (which we here refer to as type II secretory pathways [IISP]) utilizes either the general secretory pathway (GSP or Sec) or the twin-arginine targeting translocase for translocation across the inner membrane, and either the main terminal branch or one of several protein-specific export systems for translocation across the outer membrane. We here survey the various well-characterized protein translocation systems found in living organisms and then focus on the systems present in gram-negative bacteria. Comparisons between these systems suggest specific biogenic, mechanistic and evolutionary similarities as well as major differences.

Sample preparation for two-dimensional blue native/SDS polyacrylamide gel electrophoresis in the identification of Streptomyces coelicolor cytoplasmic protein complexes

Ammonium sulfate precipitation was tested as a sample preparation step for BN-PAGE analyses of S. coelicolor cytoplasmic protein complexes. A procedure of sample preparation compatible with two-dimensional BN/SDS-PAGE was established and used to visualize protein complexes. To validate the sample preparation procedure, representative protein complexes were identified. Several previously characterized protein complexes were rediscovered and their reported oligomeric states reconfirmed. In addition, we identified new but plausible interactions that have never been reported before. Our work provides useful reference for the wide application of BN-PAGE in protein interaction study.

Allosteric regulation of SecA: magnesium-mediated control of conformation and activity

In bacteria, the SecA protein associates with a ubiquitous protein channel SecYEG where it drives the post-translational secretion of pre-proteins across the plasma membrane. The high-resolution structures of both proteins have been determined in their resting states; however, the mechanism that couples ATP hydrolysis to active transport of substrate proteins through the membrane is not well understood. An analysis of the steady-state ATPase activity of the enzyme reveals that there is an allosteric binding site for magnesium distinct from that associated with hydrolysis of ATP. We have demonstrated that this regulation involves a large conformational change to the SecA dimer, which exerts a strong influence on the turnover and affinity for ATP, as well as the affinity for ADP. The strong inhibitory influence of magnesium on the ATPase activity can be countered by cardiolipin and conditions that promote protein translocation.

Nanodiscs unravel the interaction between the SecYEG channel and its cytosolic partner SecA

The translocon is a membrane-embedded protein assembly that catalyzes protein movement across membranes. The core translocon, the SecYEG complex, forms oligomers, but the protein-conducting channel is at the center of the monomer. Defining the properties of the SecYEG protomer is thus crucial to understand the underlying function of oligomerization. We report here the reconstitution of a single SecYEG complex into nano-scale lipid bilayers, termed Nanodiscs. These water-soluble particles allow one to probe the interactions of the SecYEG complex with its cytosolic partner, the SecA dimer, in a membrane-like environment. The results show that the SecYEG complex triggers dissociation of the SecA dimer, associates only with the SecA monomer and suffices to (pre)-activate the SecA ATPase. Acidic lipids surrounding the SecYEG complex also contribute to the binding affinity and activation of SecA, whereas mutations in the largest cytosolic loop of the SecY subunit, known to abolish the translocation reaction, disrupt both the binding and activation of SecA. Altogether, the results define the fundamental contribution of the SecYEG protomer in the translocation subreactions and illustrate the power of nanoscale lipid bilayers in analyzing the dynamics occurring at the membrane.

The structure of the Sec complex and the problem of protein translocation

Proteins synthesized in the cytosol either remain there or are localized to a specific membrane and subsequently translocated to another cellular compartment. These extracytosolic proteins have to cross, or be inserted into, a phospholipid bilayer-a process governed by membrane-bound protein transporters designed to recognize and receive appropriate polypeptides and thread them through the membrane. One such translocation complex, SecY/Sec61, is found in every cell, in either the plasma membrane of bacteria and archaea or the endoplasmic reticulum membrane of eukaryotes. Recent structural findings, combined with previous genetic and biochemical studies, have helped to describe how the passage of proteins through the membrane might occur, but several points of uncertainty remain.

Co- and post-translational translocation through the protein-conducting channel: analogous mechanisms at work?

Many proteins are translocated across, or integrated into, membranes. Both functions are fulfilled by the 'translocon/translocase', which contains a membrane-embedded protein-conducting channel (PCC) and associated soluble factors that drive translocation and insertion reactions using nucleotide triphosphates as fuel. This perspective focuses on reinterpreting existing experimental data in light of a recently proposed PCC model comprising a front-to-front dimer of SecY or Sec61 heterotrimeric complexes. In this new framework, we propose (i) a revised model for SRP-SR-mediated docking of the ribosome-nascent polypeptide to the PCC; (ii) that the dynamic interplay between protein substrate, soluble factors and PCC controls the opening and closing of a transmembrane channel across, and/or a lateral gate into, the membrane; and (iii) that co- and post-translational translocation, involving the ribosome and SecA, respectively, not only converge at the PCC but also use analogous mechanisms for coordinating protein translocation.

Secretion by numbers: Protein traffic in prokaryotes

Almost all aspects of protein traffic in bacteria were covered at the ASM-FEMS meeting on the topic in Iraklio, Crete in May 2006. The studies presented ranged from mechanistic analysis of specific events leading proteins to their final destinations to the physiological roles of the targeted proteins. Among the highlights from the meeting that are reviewed here are the molecular dynamics of SecA protein, membrane protein insertion, type III secretion needles and chaperones, type IV secretion, the two partner and autosecretion systems, the 'secretion competent state', and the recently discovered type VI secretion system.

Structure of dimeric SecA, the Escherichia coli preprotein translocase motor

SecA is the preprotein translocase ATPase subunit and a superfamily 2 (SF2) RNA helicase. Here we present the 2 A crystal structures of the Escherichia coli SecA homodimer in the apo form and in complex with ATP, ADP and adenosine 5'-[beta,gamma-imido]triphosphate (AMP-PNP). Each monomer contains the SF2 ATPase core (DEAD motor) built of two domains (nucleotide binding domain, NBD and intramolecular regulator of ATPase 2, IRA2), the preprotein binding domain (PBD), which is inserted in NBD and a carboxy-terminal domain (C-domain) linked to IRA2. The structures of the nucleotide complexes of SecA identify an interfacial nucleotide-binding cleft located between the two DEAD motor domains and residues critical for ATP catalysis. The dimer comprises two virtually identical protomers associating in an antiparallel fashion. Dimerization is mediated solely through extensive contacts of the DEAD motor domains leaving the C-domain facing outwards from the dimerization core. This dimerization mode explains the effect of functionally important mutations and is completely different from the dimerization models proposed for other SecA structures. The repercussion of these findings on translocase assembly and catalysis is discussed.

Oligomeric states of the SecA and SecYEG core components of the bacterial Sec translocon

Many proteins synthesized in the cytoplasm ultimately function in non-cytoplasmic locations. In Escherichia coli, the general secretory (Sec) pathway transports the vast majority of these proteins. Two fundamental components of the Sec transport pathway are the SecYEG heterotrimeric complex that forms the channel through the cytoplasmic membrane, and SecA, the ATPase that drives the preprotein to and across the membrane. This review focuses on what is known about the oligomeric states of these core Sec components and how the oligomeric state might change during the course of the translocation of a preprotein.

SecA dimer cross-linked at its subunit interface is functional for protein translocation

SecA facilitates protein transport across the eubacterial plasma membrane by its association with cargo proteins and the SecYEG translocon, followed by ATP-driven conformational changes that promote protein translocation in a stepwise manner. Whether SecA functions as a monomer or a dimer during this process has been the subject of considerable controversy. Here we utilize cysteine-directed mutagenesis along with the crystal structure of the SecA dimer to create a cross-linked dimer at its subunit interface, which was normally active for in vitro protein translocation.

Size, motion, and function of the SecY translocon revealed by molecular dynamics simulations with virtual probes

We report a hybrid, coarse-grained and atomistic, molecular dynamics simulation study of the size, motion, and function of the SecY protein-conducting channel. Growing and pushing virtual soft ball constructs through the pore of SecY, we mimic the push-through of polypeptides, performed cotranslationally by the ribosome and posttranslationally by the SecA ATPase. Forced lateral opening of a "front gate" between transmembrane helices is also induced by the passage of the virtual probes, with implications for the membrane insertion of peptides. We conclude that the SecY channel can stretch to allow passage of peptides with transversal sizes of approximately 16 A. The observed motion of a transmembrane helical "plug" controlling the closed and open states of the channel is consistent with experimental results and confirms previous hypotheses. Additionally, the "hinge" region for front gate opening is observed to be highly mobile as postulated. Both the forced dilation of a "ring" of residues at the middle of the pore and the lateral opening of the front gate are shown to induce plug displacement, but neither accomplish a full-extent motion of the plug to the back of the channel. For probes whose passage does not destroy the resilience of the SecY, both lateral exit and full translocation are observed, despite the fact that applied forces were always in the direction along the pore axis. Lateral exit is accompanied by front gate opening and slight plug displacement, whereas full translocation is accompanied by large plug displacement but no apparent lateral opening. Simulations also reveal that dilating the pore ring is a more effective way to destabilize the plug than intercalation of a cylinder-like probe at the front gate. Based on the simulations, the existence of a family of diverse open states is proposed.

Protein translocation by the Sec61/SecY channel

The conserved protein-conducting channel, referred to as the Sec61 channel in eukaryotes or the SecY channel in eubacteria and archaea, translocates proteins across cellular membranes and integrates proteins containing hydrophobic transmembrane segments into lipid bilayers. Structural studies illustrate how the protein-conducting channel accomplishes these tasks. Three different mechanisms, each requiring a different set of channel binding partners, are employed to move polypeptide substrates: The ribosome feeds the polypeptide chain directly into the channel, a ratcheting mechanism is used by the eukaryotic endoplasmic reticulum chaperone BiP, and a pushing mechanism is utilized by the bacterial ATPase SecA. We review these translocation mechanisms, relating biochemical and genetic observations to the structures of the protein-conducting channel and its binding partners.

Biogenesis of inner membrane proteins in Escherichia coli

Gram-negative bacteria such as Escherichia coli are surrounded by two membranes, the inner membrane and the outer membrane. The biogenesis of most inner membrane proteins (IMPs), typical alpha-helical proteins, appears to follow a partly conserved cotranslational pathway. Targeting involves a relatively simple signal recognition particle (SRP) and SRP-receptor. Insertion of most IMPs into the membrane occurs via the Sec-translocon, which is also used for the vectorial transport of secretory proteins. Similar to eukaryotic systems, little is known about the later stages of biogenesis of IMPs, the folding and assembly in the lipid bilayer. Recently, YidC has been identified as a factor that assists in the integration, folding, and assembly of IMPs both in association with the Sec-translocon and separately. This review deals mainly with recent structural and biochemical data from various experimental systems that offer new insight into the different stages of biogenesis of E. coli IMPs.

The structure of the bacterial protein translocation complex SecYEG

Proteins destined for secretion, membrane insertion or organellar import contain signal sequences that direct them to the membrane. Once there, transport machines receive and translocate them appropriately across or into the membrane. The related SecY and Sec61 protein translocation complexes are ubiquitous components of machines that are essential for protein transport. They co-operate with various partners such that the substrate polypeptide is pulled or pushed through the membrane by post- or co-translational mechanisms. In bacteria and archaea, the SecY complex (SecYEG/SecYEbeta) is a heterotrimer, which associates with ribosomes so that the polypeptide is threaded through the channel during its synthesis. Bacteria possess an additional pathway, whereby the newly synthesized substrate protein is maintained in an unfolded conformation and is engaged by the ATPase SecA and delivered to the translocon. Recent medium- (cryo-electron microscopy) and high-resolution (X-ray) structures of the Sec complex have dramatically increased our understanding about how proteins pass through membranes, but have posed a number of new questions. The Sec complex is active as an oligomer, but the structure indicates that the protein-conducting channel is formed by a monomer of SecYEG. Structures of the membrane-bound dimer of Escherichia coli SecYEG and the detergent-solubilized monomer of Methanococcus jannaschii SecYEbeta will be described and discussed in the context of the mechanism that underlies protein secretion and membrane insertion.

Glutamic acid-rich proteins of rod photoreceptors are natively unfolded

The outer segment of vertebrate photoreceptors is a specialized compartment that hosts all the signaling components required for visual transduction. Specific to rod photoreceptors is an unusual set of three glutamic acid-rich proteins (GARPs) as follows: two soluble forms, GARP1 and GARP2, and the N-terminal cytoplasmic domain (GARP' part) of the B1 subunit of the cyclic GMP-gated channel. GARPs have been shown to interact with proteins at the rim of the disc membrane. Here we characterized native GARP1 and GARP2 purified from bovine rod photoreceptors. Amino acid sequence analysis of GARPs revealed structural features typical of "natively unfolded" proteins. By using biophysical techniques, including size-exclusion chromatography, dynamic light scattering, NMR spectroscopy, and circular dichroism, we showed that GARPs indeed exhibit a large degree of intrinsic disorder. Analytical ultracentrifugation and chemical cross-linking showed that GARPs exist in a monomer/multimer equilibrium. The results suggested that the function of GARP proteins is linked to their structural disorder. They may provide flexible spacers or linkers tethering the cyclic GMP-gated channel in the plasma membrane to peripherin at the disc rim to produce a stack of rings of these protein complexes along the long axis of the outer segment. GARP proteins could then provide the environment needed for protein interactions in the rim region of discs.

Atomic model of the E. coli membrane-bound protein translocation complex SecYEG

The Sec complex forms the core of a conserved machinery transporting proteins across or into membranes. In Escherichia coli SecYEG is active as an oligomer, but the structure predicts that the protein-conducting channel is formed by the monomer. A homology model of the E.coli complex was built using the atomic structure of Methanococcus jannaschii SecYEbeta. Another structure of the membrane-bound dimer was then determined by fitting the homology model to an 8A map of SecYEG determined by electron microscopy. We found that the substrate-binding site of the dimer has opened slightly and the plug domain moved toward the outside. This new position retains the channel in a closed state. These differences partially reflect the movements that have been proposed to occur during channel gating. Further opening of the substrate-binding pocket to bind and release bound substrate and displacement of the plug during secretion, presumably rely on the action of the partner proteins. The contacts arising at the dimer interface in the environment of the lipid bilayer may have activated the assembly.

The oligomeric distribution of SecYEG is altered by SecA and translocation ligands

The multimeric membrane protein complex translocase mediates the transport of preproteins across and integration of membrane proteins into the inner membrane of Escherichia coli. The translocase consists of the peripheral membrane-associated ATPase SecA and the heterotrimeric channel-forming complex consisting of SecY, SecE and SecG. We have investigated the quaternary structure of the SecYEG complex in proteoliposomes. Fluorescence resonance energy transfer demonstrates that SecYEG forms oligomers when embedded in the membrane. Freeze-fracture techniques were used to examine the oligomeric composition under non-translocating and translocating conditions. Our data show that membrane-embedded SecYEG exists in a concentration-dependent equilibrium between monomers, dimers and tetramers, and that dynamic exchange of subunits between oligomers can occur. Remarkably, the formation of dimers and tetramers in the lipid environment is stimulated significantly by membrane insertion of SecA and by the interaction with translocation ligands SecA, preprotein and ATP, suggesting that the active translocation channel consists of multiple SecYEG complexes.

Covalently dimerized SecA is functional in protein translocation

The ATPase SecA provides the driving force for the transport of secretory proteins across the cytoplasmic membrane of Escherichia coli. SecA exists as a dimer in solution, but the exact oligomeric state of SecA during membrane binding and preprotein translocation is a topic of debate. To study the requirements of oligomeric changes in SecA during protein translocation, a non-dissociable SecA dimer was formed by oxidation of the carboxyl-terminal cysteines. The cross-linked SecA dimer interacts with the SecYEG complex with a similar stoichiometry as non-cross-linked SecA. Cross-linking reversibly disrupts the SecB binding site on SecA. However, in the absence of SecB, the activity of the disulfide-bonded SecA dimer is indistinguishable from wild-type SecA. Moreover, SecYEG binding stabilizes a cold sodium dodecylsulfate-resistant dimeric state of SecA. The results demonstrate that dissociation of the SecA dimer is not an essential feature of the protein translocation reaction.

Detection and Identification of Stable Oligomeric Protein Complexes in Escherichi coli Inner Membranes

In this study we present a new technology to detect stable oligomeric protein complexes in membranes. The technology is based on the ability of small membrane-active alcohols to dissociate the highly stable homotetrameric potassium channel KcsA. It is shown via a proteomics approach, using diagonal electrophoresis and nano-flow liquid chromatography coupled to tandem mass spectrometry, that a large number of both integral and peripheral Escherichia coli inner membrane proteins are part of stable oligomeric complexes that can be dissociated by small alcohols. This study gives insight into the composition and stability of these complexes.

Dimeric SecA is essential for protein translocation

SecA facilitates bacterial protein translocation by its association with presecretory or membrane proteins and the SecYEG translocon channel. Once assembled, SecA ATPase undergoes cycles of membrane insertion and retraction at SecYEG that drive protein translocation in a stepwise fashion. SecA exists in equilibrium between a monomer and dimer, and association with its translocation ligands shifts this equilibrium dramatically. Here, we examined the proposal that protein translocation can occur by means of a SecA monomer. We produced a mutant SecA protein lacking residues 2-11, which was found to exist mostly as a monomer, and it was unable to complement a conditional-lethal secA mutant, was inactive for in vitro protein translocation, and was poorly active for translocation ATPase activity. Furthermore, we developed a technique termed membrane trapping, where wild-type SecA subunits became trapped within the membrane by overproduction of membrane-stuck mutant SecA proteins, and, in one case, a membrane-associated SecA heterodimer was demonstrated. Finally, we examined both endogenous and reconstituted membrane-bound SecA and found a significant level of SecA dimer in both cases, as assessed by chemical crosslinking. Collectively, our results strongly suggest that membrane-bound SecA dimer is critical for the protein translocation cycle, although these results cannot exclude participation of SecA monomer at some stage in the translocation process. Our findings have important implications regarding SecA motor function and translocon assembly and activation.

Recombinant protein secretion in Escherichia coli

The secretory production of recombinant proteins by the Gram-negative bacterium Escherichia coli has several advantages over intracellular production as inclusion bodies. In most cases, targeting protein to the periplasmic space or to the culture medium facilitates downstream processing, folding, and in vivo stability, enabling the production of soluble and biologically active proteins at a reduced process cost. This review presents several strategies that can be used for recombinant protein secretion in E. coli and discusses their advantages and limitations depending on the characteristics of the target protein to be produced.

Conformational State of the SecYEG-Bound SecA Probed by Single Tryptophan Fluorescence Spectroscopy

The SecYEG complex is a membrane-embedded channel that permits the passage of precursor proteins (preproteins) across the inner membrane of Escherichia coli. SecA is a molecular motor that associates with the SecYEG pore and drives the stepwise translocation of preproteins across the membrane through multiple cycles of ATP binding and hydrolysis. We have investigated the conformational state of soluble and SecYEG-bound SecA using single tryptophan mutants of SecA. The fluorescence spectral properties of the single tryptophans of SecA and their accessibility to the quencher acrylamide demonstrate that SecA undergoes a conformational change that results in a more compact structure upon binding of ATP and binding to the SecYEG pore. In addition, SecYEG-bound SecA undergoes ATP-dependent conformational changes that are not observed for soluble SecA. These data support a model in which binding to the SecYEG channel has a major impact on the SecA conformation.

SecM facilitates translocase function of SecA by localizing its biosynthesis

"Arrest sequence" of Escherichia coli SecM interacts with the ribosomal exit tunnel and arrests its own translation elongation, which is released by cotranslational export of the nascent SecM chain. This property of SecM is essential for the basal and regulated expression of SecA. Here we report that SecM has an additional role of facilitating SecA activities. Systematic determinations of the SecA-abundance-protein export relationships of cells with different SecA contents revealed that SecA was less functional when SecM was absent from the upstream region of the secM-secA message, when SecM had the arrest-defective mutation, and also when SecM lacked the signal sequence. These results suggest that cotranslational targeting of nascent SecM to the translocon plays previously unrecognized roles of facilitating the formation of functional SecA molecules. Biosynthesis in the vicinity of the membrane and the Sec translocon will be beneficial for this multiconformation ATPase to adopt ready-to-function conformations.