Increasing protein conformational stability by optimizing beta-turn sequence

Human apo-metallothionein 1a is not a random coil: Evidence from guanidinium chloride, high temperature, and acidic pH unfolding studies

The structures of apo-metallothioneins (apo-MTs) have been relatively elusive due to their fluxional, disordered state which has been difficult to characterize. However, intrinsically disordered protein (IDP) structures are rather diverse, which raises questions about where the structure of apo-MTs fit into the protein structural spectrum. In this paper, the unfolding transitions of apo-MT1a are discussed with respect to the effect of the chemical denaturant GdmCl, temperature conditions, and pH environment. Cysteine modification in combination with electrospray ionization mass spectrometry was used to probe the unfolding transition of apo-MT1a in terms of cysteine exposure. Circular dichroism spectroscopy was also used to monitor the change in secondary structure as a function of GdmCl concentration. For both of these techniques, cooperative unfolding was observed, suggesting that apo-MT1a is not a random coil. More GdmCl was required to unfold the protein backbone than to expose the cysteines, indicating that cysteine exposure is likely an early step in the unfolding of apo-MT1a. MD simulations complement the experimental results, suggesting that apo-MT1a adopts a more compact structure than expected for a random coil. Overall, these results provide further insight into the intrinsically disordered structure of apo-MT.

Characterization of a novel carboxylesterase from Streptomyces lividans TK24 and site-directed mutagenesis for its thermostability

As an industrial enzyme that catalyzes the formation and cleavage of ester bonds, carboxylesterase has attracted attention in fine chemistry, pharmaceutical, biological energy and bioremediation fields. However, the weak thermostability limits their further developments in industrial applications. In this work, a novel carboxylesterase (EstF) from Streptomyces lividans TK24, belonging to family XVII, was acquired by successfully heterologous expressed and biochemically identified. The EstF exhibited optimal activity at 55 °C, pH 9.0 and excellent catalytic performances (Km = 0.263 mM, kcat/Km = 562.3 s-1 mM-1 for p-nitrophenyl acetate (pNPA2) hydrolysis). Besides, the EstF presented exceptionally high thermostability with a half-life of 387.23 h at 55 °C and 2.86 h at 100 °C. Furthermore, the EstF was modified to obtain EstFP144G using the site-directed mutation technique to investigate the effect of single glycine on thermostability. Remarkably, the mutant EstFP144G displayed a 5.10-fold increase of half-life at 100 °C versus wild-type without affecting catalytic performance. Structural analysis implied that the glycine introduction could release a steric strain and induce cooperative effects between distal residues to increase the thermostability. Therefore, the thermostable EstF and EstFP144G with prominently catalytic characteristics have potential industrial applications and the introduction of a single glycine strategy opens up alternative avenues for the thermostability engineering of other enzymes.

Effect of proline content and histidine ligation on the dynamics of Ω-loop D and the peroxidase activity of iso-1-cytochrome c

To study how proline residues affect the dynamics of Ω-loop D (residues 70 to 85) of cytochrome c, we prepared G83P and G83A variants of yeast iso-1-cytochrome c (iso-1-Cytc) in the presence and absence of a K73H mutation. Ω-loop D is important in controlling both the electron transfer function of Cytc and the peroxidase activity of Cytc used in apoptosis because it provides the Met80 heme ligand. The G83P and G83A mutations have no effect on the global stability of iso-1-Cytc in presence or absence of the K73H mutation. However, both mutations destabilize the His73-mediated alkaline conformer relative to the native state. pH jump stopped-flow experiments show that the dynamics of the His73-mediated alkaline transition are significantly enhanced by the G83P mutation. Gated electron transfer studies show that the enhanced dynamics result from an increased rate of return to the native state, whereas the rate of loss of Met80 ligation is unchanged by the G83P mutation. Thus, the G83P substitution does not stiffen the conformation of the native state. Because bis-His heme ligation occurs when Cytc binds to cardiolipin-containing membranes, we studied the effect of His73 ligation on the peroxidase activity of Cytc, which acts as an early signal in apoptosis by causing oxygenation of cardiolipin. We find that the His73 alkaline conformer suppresses the peroxidase activity of Cytc. Thus, the bis-His ligated state of Cytc formed upon binding to cardiolipin is a negative effector for the peroxidase activity of Cytc early in apoptosis.

In Situ ATR Spectroscopy Study of the Interaction of Acacia senegal Gum with Gold Nanoparticles Films at the Solid-Liquid Interface

The adsorption process of Acacia gum (A. senegal), a complex heteropolysaccharide, was followed by using a spectroscopic method to unravel the relative contribution of the protein moieties and the carbohydrate blocks on the adsorption process. In situ ATR-FTIR was used to investigate the kinetics and conformational changes associated with the adsorption of A. senegal gum on gold nanoparticle films (Au-NPs) at different pHs. The results of this thorough study highlighted the adsorption of A. senegal gum through its protein moieties, in particular, AGPs of low molecular weight and high protein content, close to the Au-NPs surface. Isotherm experiments, by gradually increasing the concentration, showed that the gum adsorption was heterogeneous and followed the Freundlich model for the amide part, while the polysaccharide part followed the Langmuir model. In addition, the hydration and structural organization of the gum layer depended on the gum concentration. A. senegal gum adsorbed irreversibly on Au-NPs whatever the pHs, but the adsorbed layer presented a different behavior depending on pH. A more aggregated and less hydrated structure was observed at acidic pH, while a very hydrated and continuous layer was detected at higher pH. The secondary structure analysis through amide III band revealed a change in the gum secondary structure at high pH with the increase in β-turn while random coil decreased.

The functional mutational landscape of the lacZ gene

The lacZ gene of Escherichia coli encodes β-galactosidase (β-gal), a lactose metabolism enzyme of the lactose operon. Previous chemical modification or site-directed mutagenesis experiments have identified 21 amino acids that are essential for β-gal catalytic activity. We have assembled over 10,000 lacZ mutations from published studies that were collected using a positive selection assay to identify mutations in lacZ that disrupted β-gal function. We analyzed 6,465 independent lacZ mutations that resulted in 2,732 missense mutations that impaired β-gal function. Those mutations affected 492 of the 1,023 lacZ codons, including most of the 21 previously known residues critical for catalytic activity. Most missense mutations occurred near the catalytic site and in regions important for subunit tetramerization. Overall, our work provides a comprehensive and detailed map of the amino acid residues affecting the structure and catalytic activity of the β-gal enzyme.

Zn(II) Induces Fibril Formation and Antifungal Activity in Shepherin I, An Antimicrobial Peptide from Capsella bursa-pastoris

Shepherin I is a glycine- and histidine-rich antimicrobial peptide from the root of a shepherd's purse, whose antimicrobial activity was suggested to be enhanced by the presence of Zn(II) ions. We describe Zn(II) and Cu(II) complexes of this peptide, aiming to understand the correlation between their metal binding mode, structure, morphology, and biological activity. We observe a logical sequence of phenomena, each of which is the result of the previous one: (i) Zn(II) coordinates to shepherin I, (ii) causes a structural change, which, in turn, (iii) results in fibril formation. Eventually, this chain of structural changes has a (iv) biological consequence: The shepherin I-Zn(II) fibrils are highly antifungal. What is of particular interest, both fibril formation and strong anticandidal activity are only observed for the shepherin I-Zn(II) complex, linking its structural rearrangement that occurs after metal binding with its morphology and biological activity.

A cell-active cyclic peptide targeting the Nrf2/Keap1 protein-protein interaction

The disruption of the protein-protein interaction (PPI) between Nrf2 and Keap1 is an attractive strategy to counteract the oxidative stress that characterises a variety of severe diseases. Peptides represent a complementary approach to small molecules for the inhibition of this therapeutically important PPI. However, due to their polar nature and the negative net charge required for binding to Keap1, the peptides reported to date exhibit either mid-micromolar activity or are inactive in cells. Herein, we present a two-component peptide stapling strategy to rapidly access a variety of constrained and functionalised peptides that target the Nrf2/Keap1 PPI. The most promising peptide, P8-H containing a fatty acid tag, binds to Keap1 with nanomolar affinity and is effective at inducing transcription of ARE genes in a human lung epithelial cell line at sub-micromolar concentration. Furthermore, crystallography of the peptide in complex with Keap1 yielded a high resolution X-ray structure, adding to the toolbox of structures available to develop cell-permeable peptidomimetic inhibitors.

Enhancing the thermostability of carboxypeptidase A by a multiple computer-aided rational design based on amino acids preferences at β-turns

Carboxypeptidase A (CPA) with efficient hydrolysis ability has shown vital potential in food and biological fields. In addition, it is also the earliest discovered enzyme with Ochratoxin A (OTA) degradation activity. Thermostability plays an imperative role to catalyze the reactions at high temperatures in industry, but the poor thermostability of CPA restricts its industrial application. In order to improve the thermostability of CPA, flexible loops were predicted through molecular dynamics (MD) simulation. Based on the amino acid preferences at β-turns, three ΔΔG-based computational programs (Rosetta, FoldX and PoPMuSiC) were employed to screen three variants from plentiful candidates and MD simulations were then used to verify two potential variants with enhanced thermostability (R124K and S134P). Results showed that compared to the wild-type CPA, the variants S134P and R124K exhibited rise of 4.2 min and 7.4 min in half-life (t1/2) at 45 °C, 3 °C and 4.1 °C in the half inactivation temperature (T5010), in addition to increase by 1.9 °C and 1.2 °C in the melting temperature (Tm), respectively. The mechanism responsible for the enhanced thermostability was elucidated through the comprehensive analysis of molecular structure. This study shows that the thermostability of CPA can be improved by the multiple computer-aided rational design based on amino acid preferences at β-turns, broadening its industrial applicability of OTA degradation and providing a valuable strategy for the protein engineering of mycotoxin degrading enzymes.

A Multimodal Approach towards Genomic Identification of Protein Inhibitors of Uracil-DNA Glycosylase

DNA-mimicking proteins encoded by viruses can modulate processes such as innate cellular immunity. An example is Ung-family uracil-DNA glycosylase inhibition, which prevents Ung-mediated degradation via the stoichiometric protein blockade of the Ung DNA-binding cleft. This is significant where uracil-DNA is a key determinant in the replication and distribution of virus genomes. Unrelated protein folds support a common physicochemical spatial strategy for Ung inhibition, characterised by pronounced sequence plasticity within the diverse fold families. That, and the fact that relatively few template sequences are biochemically verified to encode Ung inhibitor proteins, presents a barrier to the straightforward identification of Ung inhibitors in genomic sequences. In this study, distant homologs of known Ung inhibitors were characterised via structural biology and structure prediction methods. A recombinant cellular survival assay and in vitro biochemical assay were used to screen distant variants and mutants to further explore tolerated sequence plasticity in motifs supporting Ung inhibition. The resulting validated sequence repertoire defines an expanded set of heuristic sequence and biophysical signatures shared by known Ung inhibitor proteins. A computational search of genome database sequences and the results of recombinant tests of selected output sequences obtained are presented here.

Pathologic complete response to neoadjuvant imatinib of a gastric stromal tumor with concomitant mutations in KIT: A case report and literature review

Key clinical message

We report the first case of pathologic complete response (pCR) to neoadjuvant imatinib in a gastric stromal tumor harboring KIT mutations in both exons 11 and 9. The significance of this co-occurrence is unknown and might increase the responsiveness of gastrointestinal stromal tumors (GISTs) to imatinib.

Abstract

pCR of GIST to neoadjuvant imatinib is rare. We report a case of pCR to neoadjuvant imatinib in a gastric stromal tumor that harbored co-occurrence of multiple KIT mutations in exons 11 and 9. This co-occurrence in exons 9 and 11 is the first to be reported in the English literature.

Effects of adding poly-histidine tag on stability, antimicrobial activity and safety of recombinant buforin I expressed in periplasmic space of Escherichia coli

The lack of cost-effective methods for producing antimicrobial peptides has made it impossible to use their high potential as a new and powerful class of antimicrobial agents. In recent years, extensive research has been conducted to decrease the cost of recombinant proteins production through microorganisms, transgenic animals, and plants. Well-known genetic and physiological characteristics, short-term proliferation, and ease of manipulation make E. coli expression system a valuable host for recombinant proteins production. Expression in periplasmic space is recommended to reduce the inherently destructive behavior of antimicrobial peptides against the expressing microorganism and to decline susceptibility to proteolytic degradation. In this study, a pET-based expression system was used to express buforin I at E. coli periplasmic space, and its antimicrobial, hemolytic, and cell toxicity activities as well as structural stability were evaluated. The hemolysis activity and cytotoxicity of His-tagged buforin I were negligible and its antimicrobial activity did not show a significant difference compared to synthetic buforin I. In addition, in silico investigating of stability of native and His-tagged buforin I showed that RMSF, RMSD and Rg curves had followed a similar trend during 150 ns simulation. Furthermore, evaluating the modelled structures, FTIR and X-ray methods of both peptides indicated an insignificant structural difference. It was concluded that the recombinant buforin I could be a viable alternative to some currently used antibiotics by successfully expressing it in the pET-based expression system.

Improving the thermostability of GH49 dextranase AoDex by site-directed mutagenesis

As an indispensable enzyme for the hydrolysis of dextran, dextranase has been widely used in the fields of food and medicine. It should be noted that the weak thermostability of dextranase has become a restricted factor for industrial applications. This study aims to improve the thermostability of dextranase AoDex in glycoside hydrolase (GH) family 49 that derived from Arthrobacter oxydans KQ11. Some mutants were predicted and constructed based on B-factor analysis, PoPMuSiC and HotMuSiC algorithms, and four mutants exhibited higher heat resistance. Compared with the wild-type, mutant S357P showed the best improved thermostability with a 5.4-fold increase of half-life at 60 °C, and a 2.1-fold increase of half-life at 65 °C. Furthermore, S357V displayed the most obvious increase in enzymatic activity and thermostability simultaneously. Structural modeling analysis indicated that the improved thermostability of mutants might be attributed to the introduction of proline and hydrophobic effects, which generated the rigid optimization of the structural conformation. These results illustrated that it was effective to improve the thermostability of dextranase AoDex by rational design and site-directed mutagenesis. The thermostable mutant of dextranase AoDex has potential application value, and it can also provide references for engineering other thermostable dextranases of the GH49 family.

Designing and identifying β-hairpin peptide macrocycles with antibiotic potential

Peptide macrocycles are a rapidly emerging class of therapeutic, yet the design of their structure and activity remains challenging. This is especially true for those with β-hairpin structure due to weak folding properties and a propensity for aggregation. Here, we use proteomic analysis and common antimicrobial features to design a large peptide library with macrocyclic β-hairpin structure. Using an activity-driven high-throughput screen, we identify dozens of peptides killing bacteria through selective membrane disruption and analyze their biochemical features via machine learning. Active peptides contain a unique constrained structure and are highly enriched for cationic charge with arginine in their turn region. Our results provide a synthetic strategy for structured macrocyclic peptide design and discovery while also elucidating characteristics important for β-hairpin antimicrobial peptide activity.

C-terminal determinants for RNA binding motif 7 protein stability and RNA recognition

The 7SK ribonucleoprotein (RNP) is a critical regulator of eukaryotic transcription. Recently, RNA binding motif 7 (RBM7) containing an RNA recognition motif (RRM) was reported to associate with 7SK RNA and core 7SK RNP protein components in response to DNA damage. However, little is known about the mode of RBM7-7SK RNA recognition. Here, we found that RRM constructs containing extended C-termini have increased solubility compared to a minimal RRM construct, although these constructs aggregate in a temperature and concentration-dependent manner. Using solution NMR dynamics experiments, we identified additional structural features observed previously in crystal but not in solution structures. To identify potential RBM7-7SK RNA binding sites, we analyzed deposited data from in cellulo crosslinking experiments and found that RBM7 primarily crosslinks to the distal region of 7SK stem-loop 3 (SL3). Electrophoretic mobility shift assays and NMR chemical shift perturbation experiments showed weak binding to 7SK SL3 constructs in vitro. Together, these results provide new insights into RBM7 RRM folding and recognition of 7SK RNA.

Impacts of noncovalent interactions involving sulfur atoms on protein stability, structure, folding, and bioactivity

This review discusses the various types of noncovalent interactions in which sulfur atoms participate and their effects on protein stability, structure, folding and bioactivity. Current approaches and recommendations for modelling these noncovalent interactions (in terms of both geometries and interaction energies) are highlighted.

Engineering flexible loops to enhance thermal stability of keratinase for efficient keratin degradation

Keratinase-catalyzed degradation of keratin waste has been shown to be a promising recycling method. Although the recombinant KerZ1 derived from Bacillus subtilis has shown the highest activity among the keratinases reported so far, the low thermal stability caused by the unstable flexible loops limited its keratin-degrading ability. To this end, the flexible loops of KerZ1 were engineered to be more hydrophobic and rigid through B-factor calculations, molecular dynamics simulations, and β-turn redesign. We developed several highly thermostable keratinase variants and showed enhanced keratin degradation activity. In particular, the loop regions of the variants KerZ1^A128D/L240N, KerZ1^T77E/L240N and KerZ1^T77C/A128D were designed to be more stable, with T_m values increased by 8 °C, 6 °C and 5 °C, and corresponding t_1/2 increased by 2.3, 3.3 and 5.0 times. The keratin degradation activity of the variant KerZ1^T77C/A128D at 60 °C was enhanced by 46 % compared with KerZ1^WT. The strategy of this research and the obtained keratinase variants will be a significant improvement in the complete degradation of keratin.

Tailoring the Tag/Catcher System by Integrating Covalent Bonds and Noncovalent Interactions for Highly Efficient Protein Self-Assembly

Covalent bonds and noncovalent interactions play crucial roles in enzyme self-assembly. Here, we designed a Tag/Catcher system named NGTag/NGCatcher in which the Catcher is a highly charged protein that can bind proteins with positively charged tails and rapidly form a stable isopeptide bond with NGTag. In this study, we present a multienzyme strategy based on covalent bonds and noncovalent interactions. In vitro, mCherry, YFP, and GFP can form protein-rich three-dimensional networks based on NGCatcher, NGTag, and RK (Arginine/Lysine) tails, respectively. Furthermore, this technology was applied to improve lycopene production in Escherichia coli. Three key enzymes were involved in lycopene production variants from Deinococcus wulumuqiensis R12 of NGCatcher_CrtE, NGTag_Idi, and RKIspARK, where the multienzyme complexes were clearly observed in vivo and in vitro, and the lycopene production in vivo was 17.8-fold higher than that in the control group. The NGTag/NGCatcher system will provide new opportunities for in vivo and in vitro multienzyme catalysis.

Glycine Substitution of Residues with Unfavored Dihedral Angles Improves Protein Thermostability

Single mutations that can substantially enhance stability are highly desirable for protein engineering. However, it is generally rare for this kind of mutant to emerge from directed evolution experiments. This study used computational approaches to identify hotspots in a diacylglycerol-specific lipase for mutagenesis with functional hotspot and sequence consensus strategies, followed by ∆∆G calculations for all possible mutations using the Rosetta ddg_monomer protocol. Single mutants with significant ∆∆G changes (≤−2.5 kcal/mol) were selected for expression and characterization. Three out of seven tested mutants showed a significantly enhanced thermostability, with Q282W and A292G in the catalytic pocket and D245G located on the opposite surface of the protein. Remarkably, A292G increased the T5015 (the temperature at which 50% of the enzyme activity was lost after a 15 min of incubation) by ~7 °C, concomitant with a twofold increase in enzymatic activity at the optimal reaction temperature. Structural analysis showed that both A292 and D245 adopted unfavored dihedral angles in the wild-type (WT) enzyme. Substitution of them by glycine might release a steric strain to increase the stability. In sum, substitution by glycine might be a promising strategy to improve protein thermostability.

Structure of Senecavirus A 3C Protease Revealed the Cleavage Pattern of 3C Protease in Picornaviruses

Senecavirus A (SVA) is an emerging picornavirus infecting porcine of all age groups and causing foot and mouth disease (FMD)-like symptoms. One of its key enzymes is the 3C protease (3C^pro), which is similar to other picornaviruses and essential for virus maturation by controlling polyprotein cleavage and RNA replication. In this study, we reported the crystal structure of SVA 3C^pro at a resolution of 1.9 Šand a thorough structural comparison against all published picornavirus 3C^pro structures. Using statistical and graphical visualization techniques, we also investigated the sequence specificity of the 3C^pro. The structure revealed that SVA 3C^pro adopted a typical chymotrypsin-like fold with the S1 subsite as the most conservative site among picornavirus 3C^pro. The surface loop, A1-B1 hairpin, adopted a novel conformation in SVA 3C^pro and formed a positively charged protrusion around S' subsites. Correspondingly, SVA scissile bonds preferred Asp rather than neutral amino acids at P3' and P4'. Moreover, SVA 3C^pro showed a wide range tolerance to P4 residue volume (acceptable range: 67 ų to 141 ų), such as aromatic side chain, in contrast to other picornaviruses. In summary, our results provided valuable information for understanding the cleavage pattern of 3C^pro. IMPORTANCE Picornaviridae is a group of RNA viruses that harm both humans and livestock. 3C^pro is an essential enzyme for picornavirus maturation, which makes it a promising target for antiviral drug development and a critical component for virus-like particle (VLP) production. However, the current challenge in the development of antiviral drugs and VLP vaccines includes the limited knowledge of how subsite structure determines the 3C^pro cleavage pattern. Thus, an extensive comparative study of various picornaviral 3C^pro was required. Here, we showed the 1.9 Šcrystal structure of SVA 3C^pro. The structure revealed similarities and differences in the substrate-binding groove among picornaviruses, providing new insights into the development of inhibitors and VLP.

Structural Design and Assessing of Recombinantly Expressed African Swine Fever Virus p72 Trimer in Saccharomyces cerevisiae

In an effort to control the outbreak of the African Swine Fever Virus (ASFV), there is an urgent need to develop an effective method to prevent the pandemic, including vaccines and diagnostic methods. The major capsid protein of ASFV p72 (B646L), which forms a trimer with each monomer adopting a double jelly roll fold, is the main component of the virus particle and major antigen of ASFV. Thus, the p72 protein may be considered an antigen candidate for vaccine and diagnostic development. However, the development of ASFV p72 trimer for the industry application, including veterinary usage, faces unavoidable challenges: firstly, the low cost of the antigen production is required in vaccine and diagnostic application; and, secondly, whether produced antigen folds in its native conformation. Here, based on the information provided by the atomic structure of p72, we have successfully performed rational mutagenesis on p72 trimers and expressed it in Saccharomyces cerevisiae with high yields. The cryo-EM structure of recombinant expressed p72 trimer is determined at 4.18 Å in resolution. The correlation coefficient between this structure and the ASFV virus structure is 0.77, suggesting a highly similar fold of this trimer with the native protein on the virus particle.

Computationally Decoding NudF Residues To Enhance the Yield of the DXP Pathway

Terpenoids form a large pool of highly diverse organic compounds possessing several economically important properties, including nutritional, aromatic, and pharmacological properties. The 1-deoxy-d-xylulose 5-phosphate (DXP) pathway's end enzyme, nuclear distribution protein (NudF), interacting with isopentenyl pyrophosphate (IPP) and dimethylallyl pyrophosphate (DMAPP), is critical for the synthesis of isoprenol/prenol/downstream compounds. The enzyme is yet to be thoroughly investigated to increase the overall yield of terpenoids in the Bacillus subtilis, which is widely used in industry and is generally regarded as a safe (GRAS) bacterium. The study aims to analyze the evolutionary conservation across the active site for mapping the key residues for mutagenesis studies. The 37-sequence data set, extracted from 103 Bacillus subtilis entries, shows a high phylogenetic divergence, and only six one-motif sequences ASB92783.1, ASB69297.1, ASB56714.1, AOR97677.1, AOL97023.1, and OAZ71765.1 show a monophyly relationship, unlike a complete polyphyly relationship between the other 31 three-motif sequences. Furthermore, only 47 of 179 residues of the representative sequence CUB50584.1 are observed to be significantly conserved. Docking analysis suggests a preferential bias of adenosine diphosphate (ADP)-ribose pyrophosphatase toward IPP, and a nearly threefold energetic difference is observed between IPP and DMAPP. The loops are hereby shown to play a regulatory role in guiding the promiscuity of NudF toward a specific ligand. Computational saturation mutagenesis of the seven hotspot residues identifies two key positions LYS78 and PHE116, orderly encoded within loop1 and loop7, majorly interacting with the ligands DMAPP and IPP, and their mutants K78I/K78L and PHE116D/PHE116E are found to stabilize the overall conformation. Molecular dynamics analysis shows that the IPP complex is significantly more stable than the DMAPP complex, and the NudF structure is very unstable. Besides showing a promiscuous binding of NudF with ligands, the analysis suggests its rate-limiting nature. The study would allow us to customize the metabolic load toward the synthesis of any of the downstream molecules. The findings would pave the way for the development of catalytically improved NudF mutants for the large-scale production of specific terpenoids with significant nutraceutical or commercial value.

In silico comparative structural and compositional analysis of glycoproteins of RSV to study the nature of stability and transmissibility of RSV A

The current scenario of COVID-19 makes us to think about the devastating diseases that kill so many people every year. Analysis of viral proteins contributes many things that are utterly useful in the evolution of therapeutic drugs and vaccines. In this study, sequence and structure of fusion glycoproteins and major surface glycoproteins of respiratory syncytial virus (RSV) were analysed to reveal the stability and transmission rate. RSV A has the highest abundance of aromatic residues. The Kyte-Doolittle scale indicates the hydrophilic nature of RSV A protein which leads to the higher transmission rate of this virus. Intra-protein interactions such as carbonyl interactions, cation-pi, and salt bridges were shown to be greater in RSV A compared to RSV B, which might lead to improved stability. This study discovered the presence of a network aromatic-sulphur interaction in viral proteins. Analysis of ligand binding pocket of RSV proteins indicated that drugs are performing better on RSV B than RSV A. It was also shown that increasing the number of tunnels in RSV A proteins boosts catalytic activity. This study will be helpful in drug discovery and vaccine development.

Dimer dissociation is a key energetic event in the fold-switch pathway of KaiB

Cyanobacteria possesses the simplest circadian clock, composed of three proteins that act as a phosphorylation oscillator: KaiA, KaiB, and KaiC. The timing of this oscillator is determined by the fold-switch of KaiB, a structural rearrangement of its C-terminal half that is accompanied by a change in the oligomerization state. During the day, KaiB forms a stable tetramer (gsKaiB), whereas it adopts a monomeric thioredoxin-like fold during the night (fsKaiB). Although the structures and functions of both native states are well studied, little is known about the sequence and structure determinants that control their structural interconversion. Here, we used confinement molecular dynamics (CCR-MD) and folding simulations using structure-based models to show that the dissociation of the gsKaiB dimer is a key energetic event for the fold-switch. Hydrogen-deuterium exchange mass spectrometry (HDXMS) recapitulates the local stability of protein regions reported by CCR-MD, with both approaches consistently indicating that the energy and backbone flexibility changes are solely associated with the region that fold-switches between gsKaiB and fsKaiB and that the localized regions that differentially stabilize gsKaiB also involve regions outside the dimer interface. Moreover, two mutants (R23C and R75C) previously reported to be relevant for altering the rhythmicity of the Kai clock were also studied by HDXMS. Particularly, R75C populates dimeric and monomeric states with a deuterium incorporation profile comparable to the one observed for fsKaiB, emphasizing the importance of the oligomerization state of KaiB for the fold-switch. These findings suggest that the information necessary to control the rhythmicity of the cyanobacterial biological clock is, to a great extent, encoded within the KaiB sequence.

Single-conformation spectroscopy of cold, protonated DPG-containing peptides: switching β-turn types and formation of a sequential type II/II' double β-turn

D-Proline (^DPro, ^DP) is widely utilized to form β-hairpin loops in engineered peptides that would otherwise be unstructured, most often as part of a ^DPG sub-unit that forms a β-turn. To observe whether ^DPG facilitated this effect in short protonated peptides, conformation specific IR-UV double resonance photofragment spectra of the cold (∼10 K) protonated ^DP and ^LP diastereomers of the pentapeptide YAPGA was carried out in the hydride stretch (2800-3700 cm^-1) and amide I/II (1400-1800 cm^-1) regions. A model localized Hamiltonian was developed to better describe the 1600-1800 cm^-1 region commonly associated with the amide I vibrations. The CO stretch fundamentals experience extensive mixing with the N-H bending fundamentals of the NH₃⁺ group in these protonated peptides. The model Hamiltonian accounts for experiment in quantitative detail. In the ^DP diastereomer, all the population is funneled into a single conformer which presented as a type II β-turn with A and ^DP in the i + 1 and i + 2 positions, respectively. This structure was not the anticipated type II' β-turn across ^DPG that we had hypothesized based on solution-phase propensities. Analysis of the conformational energy landscape shows that both steric and charge-induced effects play a role in the preferred formation of the type II β-turn. In contrast, the ^LP isomer forms three conformations with very different structures, none of which were type II/II' β-turns, confirming that ^LPG is not a β-turn former. Finally, single-conformation spectroscopy was also carried out on the extended peptide [YAA^DPGAAA + H]⁺ to determine whether moving the protonated N-terminus further from ^DPG would lead to β-hairpin formation. Despite funneling its entire population into a single peptide backbone structure, the assigned structure is not a β-hairpin, but a concatenated type II/type II' double β-turn that displaces the peptide backbone laterally by about 7.5 Å, but leaves the backbone oriented in its original direction.

Characterization of a Highly Selective 2″-O-Galactosyltransferase from Trollius chinensis and Structure-Guided Engineering for Improving UDP-Glucose Selectivity

A novel 2″-O-galactosyltransferase TcOGT4 was discovered from Trollius chinensis. TcOGT4 could regio-specifically catalyze 2″-O-galactosylation of 17 flavone 8-C-β-d-glucosides and shows high preference for UDP-Gal. Molecular docking indicated that Pro361 may play a key role in sugar donor selectivity, and the P361W mutant exhibited significantly enhanced selectivity toward UDP-Glc. A total of 21 products including 17 new compounds were obtained, and 5 of them showed potent COX-2 inhibitory activities. TcOGT4 is the first reported 2″-O-galactosyltransferase for flavone C-glycosides, and could be a powerful biocatalyst to synthesize bioactive flavone glycosides.

Complete cysteine-scanning mutagenesis of the Salmonella typhimurium melibiose permease

The melibiose permease of Salmonella typhimurium (MelB_St) catalyzes the stoichiometric symport of galactopyranoside with a cation (H⁺, Li⁺, or Na⁺) and is a prototype for Na⁺-coupled major facilitator superfamily (MFS) transporters presenting from bacteria to mammals. X-ray crystal structures of MelB_St have revealed the molecular recognition mechanism for sugar binding; however, understanding of the cation site and symport mechanism is still vague. To further investigate the transport mechanism and conformational dynamics of MelB_St, we generated a complete single-Cys library containing 476 unique mutants by placing a Cys at each position on a functional Cys-less background. Surprisingly, 105 mutants (22%) exhibit poor transport activities (<15% of Cys-less transport), although the expression levels of most mutants were comparable to that of the control. The affected positions are distributed throughout the protein. Helices I and X and transmembrane residues Asp and Tyr are most affected by cysteine replacement, while helix IX, the cytoplasmic middle-loop, and C-terminal tail are least affected. Single-Cys replacements at the major sugar-binding positions (K18, D19, D124, W128, R149, and W342) or at positions important for cation binding (D55, N58, D59, and T121) abolished the Na⁺-coupled active transport, as expected. We mapped 50 loss-of-function mutants outside of these substrate-binding sites that suffered from defects in protein expression/stability or conformational dynamics. This complete Cys-scanning mutagenesis study indicates that MelB_St is highly susceptible to single-Cys mutations, and this library will be a useful tool for further structural and functional studies to gain insights into the cation-coupled symport mechanism for Na⁺-coupled MFS transporters.

DogCatcher allows loop-friendly protein-protein ligation

There are many efficient ways to connect proteins at termini. However, connecting at a loop is difficult because of lower flexibility and variable environment. Here, we have developed DogCatcher, a protein that forms a spontaneous isopeptide bond with DogTag peptide. DogTag/DogCatcher was generated initially by splitting a Streptococcus pneumoniae adhesin. We optimized DogTag/DogCatcher through rational design and evolution, increasing reaction rate by 250-fold and establishing millimolar solubility of DogCatcher. When fused to a protein terminus, DogTag/DogCatcher reacts slower than SpyTag003/SpyCatcher003. However, inserted in loops of a fluorescent protein or enzyme, DogTag reacts much faster than SpyTag003. Like many membrane proteins, the ion channel TRPC5 has no surface-exposed termini. DogTag in a TRPC5 extracellular loop allowed normal calcium flux and specific covalent labeling on cells in 1 min. DogTag/DogCatcher reacts under diverse conditions, at nanomolar concentrations, and to 98% conversion. Loop-friendly ligation should expand the toolbox for creating protein architectures.

•

Spontaneous transamidation at internal sites harnessing a DogTag/DogCatcher pair

•

DogCatcher is designed and bred for high solubility and rapid reaction

•

Within protein loops DogTag can clamp on its partner faster than SpyTag003

•

Fast and faithful fluorescent labeling of an ion channel at the cell surface via DogTag

The impact of oncogenic mutations of the viral Src kinase on the structure and stability of the SH3 domain

Src kinase belongs to the family of Src-related nonreceptor tyrosine kinases. Because of its physiological role in cell growth and proliferation, its activity is strictly controlled by several mechanisms. Nevertheless, in viral Src kinase (v-Src) some of these mechanisms fail, and its uncontrolled activity is responsible for the occurrence of cancer. Here, the crystal structures of three SH3-domain mutants of v-Src were determined to unveil the effects of these oncogenic mutations in this regulatory domain. Mutations in the n-Src and distal loops have a low impact on the overall structure of the domain and its capacity to form intertwined dimers. However, mutations in the RT loop compromise the stability of the domain and make the protein very prone to aggregation. Additionally, these mutations prevent the formation of intertwined dimers. The results show a synergistic effect between mutations in the RT loop and those in the n-Src and distal loops. Analysis of the structures of the v-Src SH3-domain mutants and the closed inactive conformation of cellular Src kinase (c-Src) point to a loss of the interactions that are required to establish the compact inactive form of the kinase. Nevertheless, an analysis of structures of the c-Src SH3 domain complexed with class I and II peptides points to minor changes in the interactions between the v-Src SH3 domain and these peptides. In this way, the structures reported here indicate that mutations in the RT loop might impair the kinase regulation mechanism without affecting the recognition of short proline-rich motifs in the target proteins of the kinase, thus explaining the oncogenic behaviour of the protein.

Enhancement of the Isomerization Activity and Thermostability of Cellobiose 2-Epimerase from Caldicellulosiruptor saccharolyticus by Exchange of a Flexible Loop

Cellobiose 2-epimerase (CE) offers a promising enzymatic approach to produce lactulose. However, its application is limited by the unsatisfactory isomerization activity and thermostability. Our study attempted to optimize the catalytic performances of CEs by flexible loop exchange, for which four mutants were constructed using CsCE (CE from Caldicellulosiruptor saccharolyticus) as a template. As a result, all mutants maintained the same catalytic directions as the templates. Mutant RmC displayed a 2.2- and 1.34-fold increase in the isomerization activity and catalytic efficiency, respectively. According to the results of molecular dynamics (MD) simulations, it was revealed that the loop exchange in RmC enlarged the entrance of the active site for substrate binding and benefited proton transfer involved in the isomerization process. Besides, the t_1/2 of mutant StC at 70 °C was increased from 29.07 to 38.29 h, owing to the abundance of rigid residues (proline) within the flexible loop of StC. Our work demonstrated that the isomerization activity and thermostability of CEs were closely related to the flexible loop surrounding the active site, which provides a new perspective to engineer CEs for higher lactulose production.

A systematic analysis of the beta hairpin motif in the Protein Data Bank

The beta hairpin motif is a ubiquitous protein structural motif that can be found in molecules across the tree of life. This motif, which is also popular in synthetically designed proteins and peptides, is known for its stability and adaptability to broad functions. Here, we systematically probe all 49,000 unique beta hairpin substructures contained within the Protein Data Bank (PDB) to uncover key characteristics correlated with stable beta hairpin structure, including amino acid biases and enriched interstrand contacts. We find that position specific amino acid preferences, while seen throughout the beta hairpin structure, are most evident within the turn region, where they depend on subtle turn dynamics associated with turn length and secondary structure. We also establish a set of broad design principles, such as the inclusion of aspartic acid residues at a specific position and the careful consideration of desired secondary structure when selecting residues for the turn region, that can be applied to the generation of libraries encoding proteins or peptides containing beta hairpin structures.

Human Papillomavirus Infections in Cervical Samples From HIV-Positive Women: Evaluation of the Presence of the Nonavalent HPV Genotypes and Genetic Diversity

Non-nonavalent vaccine (9v) Human papillomavirus (HPV) types have been shown to have high prevalence among HIV-positive women. Here, 1444 cervical samples were tested for HPV DNA positivity. Co-infections of the 9v HPV types with other HPV types were evaluated. The HPV81 L1 and L2 genes were used to investigate the genetic variability of antigenic epitopes. HPV-positive samples were genotyped using the HPVCLART2 assay. The L1 and L2 protein sequences were analyzed using a self-optimized prediction method to predict their secondary structure. Co-occurrence probabilities of the 9v HPV types were calculated. Non9v types represented 49% of the HPV infections; 31.2% of the non9v HPV types were among the low-grade squamous intraepithelial lesion samples, and 27.3% among the high-grade squamous intraepithelial lesion samples, and several genotypes were low risk. The co-occurrence of 9v HPV types with the other genotypes was not correlated with the filogenetic distance. HPV81 showed an amino-acid substitution within the BC loop (N75Q) and the FGb loop (T315N). In the L2 protein, all of the mutations were located outside antigenic sites. The weak cross-protection of the 9v types suggests the relevance of a sustainable and effective screening program, which should be implemented by HPV DNA testing that does not include only high-risk types.

Frontotemporal dementia-linked P112H mutation of TDP-43 induces protein structural change and impairs its RNA binding function

TDP‐43 forms the primary constituents of the cytoplasmic inclusions contributing to various neurodegenerative diseases, including amyotrophic lateral sclerosis and frontotemporal dementia (FTD). Over 60 TDP‐43 mutations have been identified in patients suffering from these two diseases, but most variations are located in the protein's disordered C‐terminal glycine‐rich region. P112H mutation of TDP‐43 has been uniquely linked to FTD, and is located in the first RNA recognition motif (RRM1). This mutation is thought to be pathogenic, but its impact on TDP‐43 at the protein level remains unclear. Here, we compare the biochemical and biophysical properties of TDP‐43 truncated proteins with or without P112H mutation. We show that P112H‐mutated TDP‐43 proteins exhibit higher thermal stability, impaired RNA‐binding activity, and a reduced tendency to aggregate relative to wild‐type proteins. Near‐UV CD, 2D‐nuclear‐magnetic resonance, and intrinsic fluorescence spectrometry further reveal that the P112H mutation in RRM1 generates local conformational changes surrounding the mutational site that disrupt the stacking interactions of the W113 side chain with nucleic acids. Together, these results support the notion that P112H mutation of TDP‐43 contributes to FTD through functional impairment of RNA metabolism and/or structural changes that curtail protein clearance.

Improving the Accuracy of Protein Thermostability Predictions for Single Point Mutations

Accurately predicting the protein thermostability changes upon single point mutations in silico is a challenge that has implications for understanding diseases as well as industrial applications of protein engineering. Free energy perturbation (FEP) has been applied to predict the effect of single point mutations on protein stability for over 40 years and emerged as a potentially reliable prediction method with reasonable throughput. However, applications of FEP in protein stability calculations in industrial settings have been hindered by a number of limitations, including the inability to model mutations to and from prolines in which the bonded topology of the backbone is modified and the complexity in modeling charge-changing mutations. In this study, we have extended the FEP+ protocol to enable the accurate modeling of the effects on protein stability from proline mutations and from charge-changing mutations. We also evaluated the influence of the unfolded model in the stability calculations using increasingly longer peptides with native sequence and conformations. With the abovementioned improvements, the accuracy of FEP predictions of protein stability over a data set of 87 mutations on five different proteins has drastically improved compared with previous studies, with a mean unsigned error of 0.86 kcal/mol and root mean square error of 1.11 kcal/mol, comparable with the accuracy of previously published state-of-the-art small-molecule relative binding affinity calculations, which have been shown to be capable of driving discovery projects.

Construction and evaluation of an antibody phage display library targeting heparan sulfate

Heparan sulfate (HS) is a linear polysaccharide with high structural diversity. Different HS epitopes have been detected and localized using single chain variable fragment (scFv) antibodies from a ‘single pot’ phage display library containing a randomized complementarity determining region of the heavy chain (CDR3). In this study, we created a new library containing anti-HS scFvs that all harbor a dp-38 heavy chain segment where the CDR3 region was engineered to contain the XBBXBX heparin binding consensus site (X = any amino acid, B = R, K or H). The library contained ~1.73 × 10⁶ unique antibodies and was biopanned against HS from several sources. The selected antibodies were sequenced and chemically/immunohistologically characterized. A number of 67 anti-HS scFv antibodies were selected, of which 31 contained a XBBXBX CDR3 sequence. There was a clear preference for glycine at the first and proline at the fourth position of the CDR3. The sequence GZZP(R/K)X (Z = R, K or H, but may also contain N, S, or Q) was unusually overrepresented. Selected antibodies reacted with HS/heparin, but not with other glycosaminoglycans. Antibodies reacted differentially with respect to N-, 2-O, or 6-O-desulfated heparin preparations, and showed distinct topologies of HS epitopes in rat kidney sections. The library may be instrumental in the selection of a large pool of HS epitope-specific antibodies, and - since all antibodies differ only in their 6 amino acid CDR region - may be a tool for a rational design of antibodies recognizing specific HS sulfation patterns.

Lysosomal protein thermal stability does not correlate with cellular half-life: global observations and a case study of tripeptidyl-peptidase 1

Late-infantile neuronal ceroid lipofuscinosis (LINCL) is a neurodegenerative lysosomal storage disorder caused by mutations in the gene encoding the protease tripeptidyl-peptidase 1 (TPP1). Progression of LINCL can be slowed or halted by enzyme replacement therapy, where recombinant human TPP1 is administered to patients. In this study, we utilized protein engineering techniques to increase the stability of recombinant TPP1 with the rationale that this may lengthen its lysosomal half-life, potentially increasing the potency of the therapeutic protein. Utilizing multiple structure-based methods that have been shown to increase the stability of other proteins, we have generated and evaluated over 70 TPP1 variants. The most effective mutation, R465G, increased the melting temperature of TPP1 from 55.6°C to 64.4°C and increased its enzymatic half-life at 60°C from 5.4 min to 21.9 min. However, the intracellular half-life of R465G and all other variants tested in cultured LINCL patient-derived lymphoblasts was similar to that of WT TPP1. These results provide structure/function insights into TPP1 and indicate that improving in vitro thermal stability alone is insufficient to generate TPP1 variants with improved physiological stability. This conclusion is supported by a proteome-wide analysis that indicates that lysosomal proteins have higher melting temperatures but also higher turnover rates than proteins of other organelles. These results have implications for similar efforts where protein engineering approaches, which are frequently evaluated in vitro, may be considered for improving the physiological properties of proteins, particularly those that function in the lysosomal environment.

Cooperation between somatic mutation and germline-encoded residues enables antibody recognition of HIV-1 envelope glycans

Viral glycoproteins are a primary target for host antibody responses. However, glycans on viral glycoproteins can hinder antibody recognition since they are self glycans derived from the host biosynthesis pathway. During natural HIV-1 infection, neutralizing antibodies are made against glycans on HIV-1 envelope glycoprotein (Env). However, such antibodies are rarely elicited with vaccination. Previously, the vaccine-induced, macaque antibody DH501 was isolated and shown to bind to high mannose glycans on HIV-1 Env. Understanding how DH501 underwent affinity maturation to recognize glycans could inform vaccine induction of HIV-1 glycan antibodies. Here, we show that DH501 Env glycan reactivity is mediated by both germline-encoded residues that contact glycans, and somatic mutations that increase antibody paratope flexibility. Only somatic mutations in the heavy chain were required for glycan reactivity. The paratope conformation was fragile as single mutations within the immunoglobulin fold or complementarity determining regions were sufficient for eliminating antibody function. Taken together, the initial germline V_HDJ_H rearrangement generated contact residues capable of binding glycans, and somatic mutations were required to form a flexible paratope with a cavity conducive to HIV-1 envelope glycan binding. The requirement for the presence of most somatic mutations across the heavy chain variable region provides one explanation for the difficulty in inducing anti-Env glycan antibodies with HIV-1 Env vaccination.

The viral pathogen HIV-1 uses sugar molecules, called glycans, from the host to densely cover its envelope protein. Most broadly neutralizing HIV-1 antibodies interact with glycans on the HIV-1 envelope protein. For this reason, the vaccine induction of anti-HIV-1 glycan antibodies is a principal goal. Since vaccine-induced anti-HIV-1 glycan antibodies are rare, it has not been determined how antibodies develop during vaccination to recognize HIV-1 glycans. Here, we elucidated the amino acids required for a primate antibody induced by HIV-1 vaccination to interact with HIV envelope glycans. Genetic and functional analyses showed the putative antibody germline nucleotide sequence encoded amino acids that were required for glycan reactivity. Somatic mutation also introduced critical amino acids that were required for glycan recognition. Unusually, the somatic mutations were not required in order to form direct contacts with antigen, but instead functioned to improve antibody flexibility and to form its glycan binding site. These results define the molecular development of a vaccine-induced HIV-1 glycan antibody, providing insight into why vaccines rarely elicit antibodies against the glycans on the HIV-1 outer coat protein.

Approaching infinite affinity through engineering of peptide-protein interaction

Interactions between proteins normally depend on a range of noncovalent contacts. Under challenging conditions, such as with mechanical force or over long time periods, noncovalent interactions break. Unbreakable protein–protein interactions, linked by covalent bonding, provide many opportunities for robust connection of molecular building blocks, including for biomaterials, enzymes, and vaccines. When evaluating unbreakable interactions, it is important to consider whether reaction happens quickly even at low concentrations. Here we establish a genetically encoded peptide that reacts with its genetically encoded protein partner with a speed close to the limit set by diffusion. We apply a range of biophysical methods to understand the dynamics required for this interaction, demonstrating applicability to rapid and specific detection in a range of species.

Much of life’s complexity depends upon contacts between proteins with precise affinity and specificity. The successful application of engineered proteins often depends on high-stability binding to their target. In recent years, various approaches have enabled proteins to form irreversible covalent interactions with protein targets. However, the rate of such reactions is a major limitation to their use. Infinite affinity refers to the ideal where such covalent interaction occurs at the diffusion limit. Prototypes of infinite affinity pairs have been achieved using nonnatural reactive groups. After library-based evolution and rational design, here we establish a peptide–protein pair composed of the regular 20 amino acids that link together through an amide bond at a rate approaching the diffusion limit. Reaction occurs in a few minutes with both partners at low nanomolar concentration. Stopped flow fluorimetry illuminated the conformational dynamics involved in docking and reaction. Hydrogen–deuterium exchange mass spectrometry gave insight into the conformational flexibility of this split protein and the process of enhancing its reaction rate. We applied this reactive pair for specific labeling of a plasma membrane target in 1 min on live mammalian cells. Sensitive and specific detection was also confirmed by Western blot in a range of model organisms. The peptide–protein pair allowed reconstitution of a critical mechanotransmitter in the cytosol of mammalian cells, restoring cell adhesion and migration. This simple genetic encoding for rapid irreversible reaction should provide diverse opportunities to enhance protein function by rapid detection, stable anchoring, and multiplexing of protein functionality.

B-factor Guided Proline Substitutions in Chromobacterium violaceum Amine Transaminase: Evaluation of the Proline Rule as a Method for Enzyme Stabilization

Biocatalysis is attracting interest in the chemical industry as a sustainable alternative in large-scale chemical transformations. However, low operational stability of naturally evolved enzymes is a challenge and major efforts are required to engineer protein stability, usually by directed evolution. The development of methods for protein stabilization based on rational design is of great interest, as it would minimize the efforts needed to generate stable enzymes. Here we present a rational design strategy based on proline substitutions in flexible areas of the protein identified by analyzing B-factors. Several proline substitutions in the amine transaminase from Chromobacterium violaceum were shown to have a positive impact on stability with increased half-life at 60 °C by a factor of 2.7 (variant K69P/D218P/K304P/R432P) as well as increased melting temperature by 8.3 °C (variant K167P). Finally, the presented method utilizing B-factor analysis in combination with the proline rule was deemed successful at increasing the stability of this enzyme.

Improved Thermostability of Maltooligosyltrehalose Synthase from Arthrobacter ramosus by Directed Evolution and Site-Directed Mutagenesis

Maltooligosyltrehalose synthase (MTSase) is a key enzyme in trehalose production. MTSase from Arthrobacter ramosus has poor thermostability, limiting its industrial use. In this study, mutant G415P was obtained by directed evolution and S361R/S444E was subsequently generated based on a structure analysis of the region around G415. The t_1/2 of G415P and S361R/S444E at 60 °C increased by 3.0- and 3.2-fold, respectively, compared with the wild-type enzyme. A triple mutant (G415P/S361R/S444E) was obtained through a combination of the above mutants, and its t_1/2 significantly increased by 19.7-fold. Kinetic and thermodynamic stability results showed that the T₅₀ and T_m values of the triple mutant increased by 7.1 and 7.3 °C, respectively, compared with those of the wild-type enzyme. When the triple mutant was used in trehalose production, the yield reached 71.6%, higher than the 70.3% achieved with the wild-type. Thus, the mutant has a potential application for industrial trehalose production.

Conformational dynamics of Ribonuclease Sa and its S48P mutant: Implications for the stability of the mutant protein

The optimization of β-turns has been used as a strategy to increase protein thermal stability. One example is the S48P mutation in Ribonuclease Sa, introduced to optimize a β-turn, which increases the stability of the protein as determined experimentally. Here, we have studied ⁴⁸SYGY⁵¹ β-turn and its S48P mutant from RNase Sa, as a peptide and as part of the protein, using molecular dynamics simulations. The turn propensity of the region ⁴⁸SYGY⁵¹ shows an increase in both the peptide and protein models on S48P mutation. The mutant protein shows an overall decrease in conformational dynamics and a decrease in conformational heterogeneity as compared to the wildtype protein. A comparatively restricted sampling of the φ-ψ region of GLN47, a pre PRO48 residue, in the mutant protein and some local changes in hydrogen bonding patterns involving residues 20-24 might be contributing to the mutant protein stability. In addition, some long-range hydrogen bonding interactions involving the 60s loop and the salt-bridge interaction involving ASP17-ARG63 could also be contributing to the increase in rigidity and stability of the mutant protein.

Enhancing the thermostability of Rhizopus oryzae lipase by combined mutation of hot-spots and engineering a disulfide bond

Rhizopus oryzae lipase (ROL) is important because of its extreme sn-1,3-regioselectivity, but it shows poor thermostability, which severely restricts its application. In this work, the thermostability of ROL was greatly enhanced by rational design. First, several sites that may affect the thermostability of ROL were identified by multiple-sequence alignment. The half-lives of mutants V209L and D262G at 55 °C were about 4.38- and 4.2-times those of the wild-type, respectively. Then, a disulfide bond was introduced between positions 190 and 238 based on the prediction of Disulfide by Design 2, which greatly improved the thermostability of the protein. The activity of variant E190C/E238C retained about 58.2% after incubation at 55 °C for 720 min, whereas the half-life of wild type ROL was only about 11.7 min. On the basis of the results obtained by the two methods, we carried out a combined mutation. Quadruple mutant V209L/D262G/E190C/E238C was constructed and the thermostability was improved even further. The half-lives at 55 °C and 65 °C were 102.5- and 20-times those of the wild-type ROL. This improvement in thermostability will give ROL wider industrial applicability, especially in the preparation of structured lipids.

Rational protein design for thermostabilization of glycoside hydrolases based on structural analysis

Glycosidases are used in the food, chemical, and energy industries. These proteins are some of the most frequently used such enzymes, and their thermostability is essential for long-term and/or repeated use. In addition to thermostability, modification of the substrate selectivity and improvement of the glycosidase activities are also important. Thermostabilization of enzymes can be performed by directed evolution via random mutagenesis or by rational design via site-directed mutagenesis; each approach has advantages and disadvantages. In this paper, we introduce thermostabilization of glycoside hydrolases by rational protein design using site-directed mutagenesis along with X-ray crystallography and simulation modeling. We focus on the methods of thermostabilization of glycoside hydrolases by linking the N- and C-terminal ends, introducing disulfide bridges, and optimizing β-turn structures to promote hydrophobic interactions.