1
|
Sloas DC, Tran JC, Marzilli AM, Ngo JT. Tension-tuned receptors for synthetic mechanotransduction and intercellular force detection. Nat Biotechnol 2023; 41:1287-1295. [PMID: 36646932 PMCID: PMC10499187 DOI: 10.1038/s41587-022-01638-y] [Citation(s) in RCA: 18] [Impact Index Per Article: 18.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/29/2021] [Accepted: 12/08/2022] [Indexed: 01/18/2023]
Abstract
Cells interpret mechanical stimuli from their environments and neighbors, but the ability to engineer customized mechanosensing capabilities has remained a synthetic and mechanobiology challenge. Here we introduce tension-tuned synthetic Notch (SynNotch) receptors to convert extracellular and intercellular forces into specifiable gene expression changes. By elevating the tension requirements of SynNotch activation, in combination with structure-guided mutagenesis, we designed a set of receptors with mechanical sensitivities spanning the physiologically relevant picoNewton range. Cells expressing these receptors can distinguish between varying tensile forces and respond by enacting customizable transcriptional programs. We applied these tools to design a decision-making circuit, through which fibroblasts differentiate into myoblasts upon stimulation with distinct tension magnitudes. We also characterize cell-generated forces transmitted between cells during Notch signaling. Overall, this work provides insight into how mechanically induced changes in protein structure can be used to transduce physical forces into biochemical signals. The system should facilitate the further programming and dissection of force-related phenomena in biological systems.
Collapse
Affiliation(s)
- D Christopher Sloas
- Department of Biomedical Engineering and Biological Design Center, Boston University, Boston, MA, USA
| | - Jeremy C Tran
- Department of Biomedical Engineering and Biological Design Center, Boston University, Boston, MA, USA
| | - Alexander M Marzilli
- Department of Biomedical Engineering and Biological Design Center, Boston University, Boston, MA, USA
| | - John T Ngo
- Department of Biomedical Engineering and Biological Design Center, Boston University, Boston, MA, USA.
| |
Collapse
|
2
|
Xia J, Zuo J, Li H. Molecular homogeneity of GB1 revealed by single molecule force spectroscopy. NANOSCALE 2022; 14:9925-9931. [PMID: 35788627 DOI: 10.1039/d2nr02614g] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
In single molecule studies, the ergodic hypothesis is inherently assumed, which states that the time average of a physical quantity of a single member of an ensemble is the same as the average of the same quantity on the whole ensemble at a given time. This hypothesis implies the homogeneity of a molecular ensemble of a system of interest. However, it is difficult to test the validity of the ergodic hypothesis experimentally. Recent theoretical work suggested that heterogeneity may be widely present in single molecule force spectroscopy studies. Here we used atomic force microscope based single molecule force spectroscopy to examine the molecular homogeneity/heterogeneity of a small globular protein GB1 in its mechanical unfolding reaction. Using a polyprotein (GB1)4, we directly measured the ensemble average and time average for a single molecule of the mechanical unfolding force and kinetic parameters that characterize the mechanical unfolding free energy profile of GB1. Our results showed that the ensemble averages of these physical quantities are indeed the same as the time averages for single molecules, and individual molecules did not show any differences amongst them in these physical quantities. These results are consistent with the expectation of the ergodic hypothesis and indicate that GB1 is a homogeneous molecular ensemble in its mechanical unfolding reaction on the time scale of our force spectroscopy experiments.
Collapse
Affiliation(s)
- Jiahao Xia
- Department of Chemistry, University of British Columbia, Vancouver, BC, V6T 1Z1, Canada.
| | - Jiacheng Zuo
- Department of Chemistry, University of British Columbia, Vancouver, BC, V6T 1Z1, Canada.
| | - Hongbin Li
- Department of Chemistry, University of British Columbia, Vancouver, BC, V6T 1Z1, Canada.
| |
Collapse
|
3
|
Alegre-Cebollada J. Protein nanomechanics in biological context. Biophys Rev 2021; 13:435-454. [PMID: 34466164 PMCID: PMC8355295 DOI: 10.1007/s12551-021-00822-9] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/24/2021] [Accepted: 07/05/2021] [Indexed: 12/20/2022] Open
Abstract
How proteins respond to pulling forces, or protein nanomechanics, is a key contributor to the form and function of biological systems. Indeed, the conventional view that proteins are able to diffuse in solution does not apply to the many polypeptides that are anchored to rigid supramolecular structures. These tethered proteins typically have important mechanical roles that enable cells to generate, sense, and transduce mechanical forces. To fully comprehend the interplay between mechanical forces and biology, we must understand how protein nanomechanics emerge in living matter. This endeavor is definitely challenging and only recently has it started to appear tractable. Here, I introduce the main in vitro single-molecule biophysics methods that have been instrumental to investigate protein nanomechanics over the last 2 decades. Then, I present the contemporary view on how mechanical force shapes the free energy of tethered proteins, as well as the effect of biological factors such as post-translational modifications and mutations. To illustrate the contribution of protein nanomechanics to biological function, I review current knowledge on the mechanobiology of selected muscle and cell adhesion proteins including titin, talin, and bacterial pilins. Finally, I discuss emerging methods to modulate protein nanomechanics in living matter, for instance by inducing specific mechanical loss-of-function (mLOF). By interrogating biological systems in a causative manner, these new tools can contribute to further place protein nanomechanics in a biological context.
Collapse
|
4
|
Li H. There Is Plenty of Room in The Folded Globular Proteins: Tandem Modular Elastomeric Proteins Offer New Opportunities in Engineering Protein‐Based Biomaterials. ADVANCED NANOBIOMED RESEARCH 2021. [DOI: 10.1002/anbr.202100028] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022] Open
Affiliation(s)
- Hongbin Li
- Department of Chemistry University of British Columbia Vancouver BC V6T 1Z1 Canada
| |
Collapse
|
5
|
Gupta M, Venkatramani R, Ainavarapu SRK. Role of Ligand Binding Site in Modulating the Mechanical Stability of Proteins with β-Grasp Fold. J Phys Chem B 2021; 125:1009-1019. [PMID: 33492970 DOI: 10.1021/acs.jpcb.0c08085] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
Despite many studies on ligand-modulated protein mechanics, a comparative analysis of the role of ligand binding site on any specific protein fold is yet to be made. In this study, we explore the role of ligand binding site on the mechanical properties of β-grasp fold proteins, namely, ubiquitin and small ubiquitin related modifier 1 (SUMO1). The terminal segments directly connected through hydrogen bonds constitute the β-clamp geometry (or mechanical clamp), which confers high mechanical resilience to the β-grasp fold. Here, we study ubiquitin complexed with CUE2-1, a ubiquitin-binding domain (UBD) from yeast endonuclease protein Cue2, using a combination of single-molecule force spectroscopy (SMFS) and steered molecular dynamics (SMD) simulations. Our study reveals that CUE2-1 does not alter the mechanical properties of ubiquitin, despite directly interacting with its β-clamp. To explore the role of ligand binding site, we compare the mechanical properties of the ubiquitin/CUE2-1 complex with that of previously studied SUMO1/S12, another β-grasp protein complex, using SMD simulations. Simulations on the SUMO1/S12 complex corroborate previous experimentally observed enhancement in the mechanical stability of SUMO1, even though S12 binds away from the β-clamp. Differences in ligand binding-induced structural impact at the transition state of the two complexes explain the differences in ligand modulated protein mechanics. Contrary to previous reports, our study demonstrates that direct binding of ligands to the mechanical clamp does not necessarily alter the mechanical stability of β-grasp fold proteins. Rather, binding interactions away from the clamp can reinforce protein stability provided by the β-grasp fold. Our study highlights the importance of binding site and binding modes of ligands in modulating the mechanical stability of β-grasp fold proteins.
Collapse
Affiliation(s)
- Mona Gupta
- Department of Chemical Sciences, Tata Institute of Fundamental Research, Dr Homi Bhabha Road, Colaba, Mumbai 400005, India
| | - Ravindra Venkatramani
- Department of Chemical Sciences, Tata Institute of Fundamental Research, Dr Homi Bhabha Road, Colaba, Mumbai 400005, India
| | - Sri Rama Koti Ainavarapu
- Department of Chemical Sciences, Tata Institute of Fundamental Research, Dr Homi Bhabha Road, Colaba, Mumbai 400005, India
| |
Collapse
|
6
|
Hughes MDG, Cussons S, Mahmoudi N, Brockwell DJ, Dougan L. Single molecule protein stabilisation translates to macromolecular mechanics of a protein network. SOFT MATTER 2020; 16:6389-6399. [PMID: 32578583 DOI: 10.1039/c9sm02484k] [Citation(s) in RCA: 19] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/25/2023]
Abstract
Folded globular proteins are attractive building blocks for biopolymer-based materials, as their mechanically resistant structures carry out diverse biological functionality. While much is now understood about the mechanical response of single folded proteins, a major challenge is to understand and predictably control how single protein mechanics translates to the collective response of a network of connected folded proteins. Here, by utilising the binding of maltose to hydrogels constructed from photo-chemically cross-linked maltose binding protein (MBP), we investigate the effects of protein stabilisation at the molecular level on the macroscopic mechanical and structural properties of a protein-based hydrogel. Rheological measurements show an enhancement in the mechanical strength and energy dissipation of MBP hydrogels in the presence of maltose. Circular dichroism spectroscopy and differential scanning calorimetry measurements show that MBP remains both folded and functional in situ. By coupling these mechanical measurements with mesoscopic structural information obtained by small angle scattering, we propose an occupation model in which higher proportions of stabilised, ligand occupied, protein building blocks translate their increased stability to the macroscopic properties of the hydrogel network. This provides powerful opportunities to exploit environmentally responsive folded protein-based biomaterials for many broad applications.
Collapse
Affiliation(s)
- Matt D G Hughes
- School of Physics and Astronomy, Faculty of Engineering and Physical Sciences, University of Leeds, Leeds, UK.
| | | | | | | | | |
Collapse
|
7
|
Gunnoo M, Cazade PA, Orlowski A, Chwastyk M, Liu H, Ta DT, Cieplak M, Nash M, Thompson D. Steered molecular dynamics simulations reveal the role of Ca 2+ in regulating mechanostability of cellulose-binding proteins. Phys Chem Chem Phys 2019; 20:22674-22680. [PMID: 30132772 DOI: 10.1039/c8cp00925b] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
The conversion of cellulosic biomass into biofuels requires degradation of the biomass into fermentable sugars. The most efficient natural cellulase system for carrying out this conversion is an extracellular multi-enzymatic complex named the cellulosome. In addition to temperature and pH stability, mechanical stability is important for functioning of cellulosome domains, and experimental techniques such as Single Molecule Force Spectroscopy (SMFS) have been used to measure the mechanical strength of several cellulosomal proteins. Molecular dynamics computer simulations provide complementary atomic-resolution quantitative maps of domain mechanical stability for identification of experimental leads for protein stabilization. In this study, we used multi-scale steered molecular dynamics computer simulations, benchmarked against new SMFS measurements, to measure the intermolecular contacts that confer high mechanical stability to a family 3 Carbohydrate Binding Module protein (CBM3) derived from the archetypal Clostridium thermocellum cellulosome. Our data predicts that electrostatic interactions in the calcium binding pocket modulate the mechanostability of the cellulose-binding module, which provides an additional design rule for the rational re-engineering of designer cellulosomes for biotechnology. Our data offers new molecular insights into the origins of mechanostability in cellulose binding domains and gives leads for synthesis of more robust cellulose-binding protein modules. On the other hand, simulations predict that insertion of a flexible strand can promote alternative unfolding pathways and dramatically reduce the mechanostability of the carbohydrate binding module, which gives routes to rational design of tailormade fingerprint complexes for force spectroscopy experiments.
Collapse
Affiliation(s)
- Melissabye Gunnoo
- Department of Physics, Bernal Institute, University of Limerick, V94 T9PX, Ireland.
| | | | | | | | | | | | | | | | | |
Collapse
|
8
|
Wang WB, Zhu JZ, Li XY, Li CH, Su JG, Li JY. Enhancement of protein mechanical stability: Correlated deformations are handcuffed by ligand binding. J Chem Phys 2019; 150:155102. [PMID: 31005084 DOI: 10.1063/1.5054932] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/14/2022] Open
Abstract
As revealed by previous experiments, protein mechanical stability can be effectively regulated by ligand binding with the binding site distant from the force-bearing region. However, the mechanism for such long-range allosteric control of protein mechanics is still largely unknown. In this work, we use protein topology-based elastic network model (ENM) and all-atomic steered molecular dynamics (SMD) simulations to study the impact of ligand binding on protein mechanical stability in two systems, i.e., GB1 and CheY-binding P2-domain of CheA (CBDCheA). Both ENM and SMD results show that the ligand binding has considerable and negligible effects on the mechanical stability of these two proteins, respectively. These results are consistent with the experimental observations. A physical mechanism for the enhancement of protein mechanical stability was then proposed: the correlated deformations of the force-bearing region and the binding site are handcuffed by the binding of ligand. The handcuff effect suppresses the propagation of internal force in the force-bearing region, thus improving the resistance to the loading force. Our study indicates that ENM method can effectively identify the structure motifs allosterically related to the deformation in the force bearing region, as well as the force propagation pathway within the structure of the studied proteins. Hence, it should be helpful to understand the molecular origin of the different mechanical properties in response to ligand binding for GB1 and CBDCheA.
Collapse
Affiliation(s)
- Wei Bu Wang
- Key Laboratory for Microstructural Material Physics of Hebei Province, College of Science, Yanshan University, Qinhuangdao 066004, China
| | - Jian Zhuo Zhu
- Key Laboratory for Microstructural Material Physics of Hebei Province, College of Science, Yanshan University, Qinhuangdao 066004, China
| | - Xing Yuan Li
- Key Laboratory for Microstructural Material Physics of Hebei Province, College of Science, Yanshan University, Qinhuangdao 066004, China
| | - Chun Hua Li
- College of Life Science and Bioengineering, Beijing University of Technology, Beijing 100124, China
| | - Ji Guo Su
- Key Laboratory for Microstructural Material Physics of Hebei Province, College of Science, Yanshan University, Qinhuangdao 066004, China
| | - Jing Yuan Li
- Institute of Quantitative Biology and Department of Physics, Zhejiang University, Hangzhou 310027, China
| |
Collapse
|
9
|
Izadi D, Chen Y, Whitmore ML, Slivka JD, Ching K, Lapidus LJ, Comstock MJ. Combined Force Ramp and Equilibrium High-Resolution Investigations Reveal Multipath Heterogeneous Unfolding of Protein G. J Phys Chem B 2018; 122:11155-11165. [DOI: 10.1021/acs.jpcb.8b06199] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Affiliation(s)
- Dena Izadi
- Department of Physics and Astronomy, Michigan State University, East Lansing, Michigan 48824, United States
| | - Yujie Chen
- Department of Physics and Astronomy, Michigan State University, East Lansing, Michigan 48824, United States
| | - Miles L. Whitmore
- Department of Physics and Astronomy, Michigan State University, East Lansing, Michigan 48824, United States
| | - Joseph D. Slivka
- Department of Physics and Astronomy, Michigan State University, East Lansing, Michigan 48824, United States
| | - Kevin Ching
- Department of Physics and Astronomy, Michigan State University, East Lansing, Michigan 48824, United States
| | - Lisa J. Lapidus
- Department of Physics and Astronomy, Michigan State University, East Lansing, Michigan 48824, United States
| | - Matthew J. Comstock
- Department of Physics and Astronomy, Michigan State University, East Lansing, Michigan 48824, United States
| |
Collapse
|
10
|
Verdorfer T, Gaub HE. Ligand Binding Stabilizes Cellulosomal Cohesins as Revealed by AFM-based Single-Molecule Force Spectroscopy. Sci Rep 2018; 8:9634. [PMID: 29941985 PMCID: PMC6018229 DOI: 10.1038/s41598-018-27085-x] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/18/2018] [Accepted: 05/25/2018] [Indexed: 11/22/2022] Open
Abstract
The cohesin-dockerin receptor-ligand family is the key element in the formation of multi-enzyme lignocellulose-digesting extracellular complexes called cellulosomes. Changes in a receptor protein upon binding of a ligand - commonly referred to as allostery - are not just essential for signalling, but may also alter the overall mechanical stability of a protein receptor. Here, we measured the change in mechanical stability of a library of cohesin receptor domains upon binding of their dockerin ligands in a multiplexed atomic force microscopy-based single-molecule force spectroscopy experiment. A parallelized, cell-free protein expression and immobilization protocol enables rapid mechanical phenotyping of an entire library of constructs with a single cantilever and thus ensures high throughput and precision. Our results show that dockerin binding increases the mechanical stability of every probed cohesin independently of its original folding strength. Furthermore, our results indicate that certain cohesins undergo a transition from a multitude of different folds or unfolding pathways to a single stable fold upon binding their ligand.
Collapse
Affiliation(s)
- Tobias Verdorfer
- Lehrstuhl für Angewandte Physik and Center for Nanoscience, Ludwig-Maximilians-Universität, 80799, Munich, Germany.
| | - Hermann E Gaub
- Lehrstuhl für Angewandte Physik and Center for Nanoscience, Ludwig-Maximilians-Universität, 80799, Munich, Germany
| |
Collapse
|
11
|
Schönfelder J, Alonso-Caballero A, De Sancho D, Perez-Jimenez R. The life of proteins under mechanical force. Chem Soc Rev 2018; 47:3558-3573. [PMID: 29473060 DOI: 10.1039/c7cs00820a] [Citation(s) in RCA: 20] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/27/2022]
Abstract
Although much of our understanding of protein folding comes from studies of isolated protein domains in bulk, in the cellular environment the intervention of external molecular machines is essential during the protein life cycle. During the past decade single molecule force spectroscopy techniques have been extremely useful to deepen our understanding of these interventional molecular processes, as they allow for monitoring and manipulating mechanochemical events in individual protein molecules. Here, we review some of the critical steps in the protein life cycle, starting with the biosynthesis of the nascent polypeptide chain in the ribosome, continuing with the folding supported by chaperones and the translocation into different cell compartments, and ending with proteolysis in the proteasome. Along these steps, proteins experience molecular forces often combined with chemical transformations, affecting their folding and structure, which are measured or mimicked in the laboratory by the application of force with a single molecule apparatus. These mechanochemical reactions can potentially be used as targets for fighting against diseases. Inspired by these insightful experiments, we devise an outlook on the emerging field of mechanopharmacology, which reflects an alternative paradigm for drug design.
Collapse
|
12
|
Galera-Prat A, Moraïs S, Vazana Y, Bayer EA, Carrión-Vázquez M. The cohesin module is a major determinant of cellulosome mechanical stability. J Biol Chem 2018; 293:7139-7147. [PMID: 29567834 PMCID: PMC5950008 DOI: 10.1074/jbc.ra117.000644] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/27/2017] [Revised: 02/20/2018] [Indexed: 01/20/2023] Open
Abstract
Cellulosomes are bacterial protein complexes that bind and efficiently degrade lignocellulosic substrates. These are formed by multimodular scaffolding proteins known as scaffoldins, which comprise cohesin modules capable of binding dockerin-bearing enzymes and usually a carbohydrate-binding module that anchors the system to a substrate. It has been suggested that cellulosomes bound to the bacterial cell surface might be exposed to significant mechanical forces. Accordingly, the mechanical properties of these anchored cellulosomes may be important to understand and improve cellulosome function. Here we used single-molecule force spectroscopy to study the mechanical properties of selected cohesin modules from scaffoldins of different cellulosomes. We found that cohesins located in the region connecting the cell and the substrate are more robust than those located outside these two anchoring points. This observation applies to cohesins from primary scaffoldins (i.e. those that directly bind dockerin-bearing enzymes) from different cellulosomes despite their sequence differences. Furthermore, we also found that cohesin nanomechanics (specifically, mechanostability and the position of the mechanical clamp of cohesin) are not significantly affected by other cellulosomal components, including linkers between cohesins, multiple cohesin repeats, and dockerin binding. Finally, we also found that cohesins (from both the connecting and external regions) have poor refolding efficiency but similar refolding rates, suggesting that the high mechanostability of connecting cohesins may be an evolutionarily conserved trait selected to minimize the occurrence of cohesin unfolding, which could irreversibly damage the cellulosome. We conclude that cohesin mechanostability is a major determinant of the overall mechanical stability of the cellulosome.
Collapse
Affiliation(s)
- Albert Galera-Prat
- Instituto Cajal, IC-CSIC, Avenida Doctor Arce 37, 28002 Madrid, Spain; Instituto Madrileño de Estudios Avanzados en Nanociencia, Cantoblanco, 28049 Madrid, Spain
| | - Sarah Moraïs
- Department of Biomolecular Sciences, Weizmann Institute of Science, Rehovot 76100, Israel
| | - Yael Vazana
- Department of Biomolecular Sciences, Weizmann Institute of Science, Rehovot 76100, Israel
| | - Edward A Bayer
- Department of Biomolecular Sciences, Weizmann Institute of Science, Rehovot 76100, Israel
| | - Mariano Carrión-Vázquez
- Instituto Cajal, IC-CSIC, Avenida Doctor Arce 37, 28002 Madrid, Spain; Instituto Madrileño de Estudios Avanzados en Nanociencia, Cantoblanco, 28049 Madrid, Spain.
| |
Collapse
|
13
|
Effects of ligand binding on the mechanical stability of protein GB1 studied by steered molecular dynamics simulation. J Mol Model 2016; 22:188. [DOI: 10.1007/s00894-016-3052-7] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/30/2015] [Accepted: 06/28/2016] [Indexed: 10/21/2022]
|
14
|
Hu X, Li H. Force spectroscopy studies on protein-ligand interactions: a single protein mechanics perspective. FEBS Lett 2014; 588:3613-20. [PMID: 24747422 DOI: 10.1016/j.febslet.2014.04.009] [Citation(s) in RCA: 36] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/15/2014] [Revised: 04/07/2014] [Accepted: 04/08/2014] [Indexed: 01/04/2023]
Abstract
Protein-ligand interactions are ubiquitous and play important roles in almost every biological process. The direct elucidation of the thermodynamic, structural and functional consequences of protein-ligand interactions is thus of critical importance to decipher the mechanism underlying these biological processes. A toolbox containing a variety of powerful techniques has been developed to quantitatively study protein-ligand interactions in vitro as well as in living systems. The development of atomic force microscopy-based single molecule force spectroscopy techniques has expanded this toolbox and made it possible to directly probe the mechanical consequence of ligand binding on proteins. Many recent experiments have revealed how ligand binding affects the mechanical stability and mechanical unfolding dynamics of proteins, and provided mechanistic understanding on these effects. The enhancement effect of mechanical stability by ligand binding has been used to help tune the mechanical stability of proteins in a rational manner and develop novel functional binding assays for protein-ligand interactions. Single molecule force spectroscopy studies have started to shed new lights on the structural and functional consequence of ligand binding on proteins that bear force under their biological settings.
Collapse
Affiliation(s)
- Xiaotang Hu
- State Key Laboratory of Precision Measurements Technology and Instruments, School of Precision Instrument and Opto-Electronics Engineering, Tianjin University, Tianjin 300072, PR China
| | - Hongbin Li
- State Key Laboratory of Precision Measurements Technology and Instruments, School of Precision Instrument and Opto-Electronics Engineering, Tianjin University, Tianjin 300072, PR China; Department of Chemistry, University of British Columbia, Vancouver, BC V6T 1Z1, Canada.
| |
Collapse
|
15
|
Gao X, Qin M, Yin P, Liang J, Wang J, Cao Y, Wang W. Single-molecule experiments reveal the flexibility of a Per-ARNT-Sim domain and the kinetic partitioning in the unfolding pathway under force. Biophys J 2012; 102:2149-57. [PMID: 22824279 DOI: 10.1016/j.bpj.2012.03.042] [Citation(s) in RCA: 22] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/28/2011] [Revised: 02/21/2012] [Accepted: 03/20/2012] [Indexed: 10/28/2022] Open
Abstract
Per-ARNT-Sim (PAS) domains serve as versatile binding motifs in many signal-transduction proteins and are able to respond to a wide spectrum of chemical or physical signals. Despite their diverse functions, PAS domains share a conserved structure. It has been suggested that the structure of PAS domains is flexible and thus adaptable to many binding partners. However, direct measurement of the flexibility of PAS domains has not yet been provided. Here, we quantitatively measure the mechanical unfolding of a PAS domain, ARNT PAS-B, using single-molecule atomic force microscopy. Our force spectroscopy results indicate that the structure of ARNT PAS-B can be unraveled under mechanical forces as low as ~30 pN due to its broad potential well for the mechanical unfolding transition of ~2 nm. This allows the PAS-B domain to extend by up to 75% of its resting end-to-end distance without unfolding. Moreover, we found that the ARNT PAS-B domain unfolds in two distinct pathways via a kinetic partitioning mechanism. Sixty-seven percent of ARNT PAS-B unfolds through a simple two-state pathway, whereas the other 33% unfolds with a well-defined intermediate state in which the C-terminal β-hairpin is detached. We propose that the structural flexibility and force-induced partial unfolding of PAS-B domains may provide a unique mechanism for them to recruit diverse binding partners and lower the free-energy barrier for the formation of the binding interface.
Collapse
Affiliation(s)
- Xiang Gao
- National Laboratory of Solid State Microstructure and Department of Physics, Nanjing University, Nanjing, People's Republic of China
| | | | | | | | | | | | | |
Collapse
|
16
|
Peng Q, Kong N, Wang HCE, Li H. Designing redox potential-controlled protein switches based on mutually exclusive proteins. Protein Sci 2012; 21:1222-30. [PMID: 22733630 DOI: 10.1002/pro.2109] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Synthetic/artificial protein switches provide an efficient means of controlling protein functions using chemical signals and stimuli. Mutually exclusive proteins, in which only the host or guest domain can remain folded at a given time owing to conformational strain, have been used to engineer novel protein switches that can switch enzymatic functions on and off in response to ligand binding. To further explore the potential of mutually exclusive proteins as protein switches and sensors, we report here a new redox-based approach to engineer a mutually exclusive folding-based protein switch. By introducing a disulfide bond into the host domain of a mutually exclusive protein, we demonstrate that it is feasible to use redox potential to switch the host domain between its folded and unfolded conformations via the mutually exclusive folding mechanism, and thus switching the functionality of the host domain on and off. Our study opens a new and potentially general avenue that uses mutually exclusive proteins to design novel switches able to control the function of a variety of proteins.
Collapse
Affiliation(s)
- Qing Peng
- Department of Chemistry, University of British Columbia, Vancouver, British Columbia, Canada
| | | | | | | |
Collapse
|
17
|
Bu T, Wang HCE, Li H. Single molecule force spectroscopy reveals critical roles of hydrophobic core packing in determining the mechanical stability of protein GB1. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2012; 28:12319-12325. [PMID: 22823458 DOI: 10.1021/la301940g] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
Understanding molecular determinants of protein mechanical stability is important not only for elucidating how elastomeric proteins are designed and functioning in biological systems but also for designing protein building blocks with defined nanomechanical properties for constructing novel biomaterials. GB1 is a small α/β protein and exhibits significant mechanical stability. It is thought that the shear topology of GB1 plays an important role in determining its mechanical stability. Here, we combine single molecule atomic force microscopy and protein engineering techniques to investigate the effect of side chain reduction and hydrophobic core packing on the mechanical stability of GB1. We engineered seven point mutants and carried out mechanical φ-value analysis of the mechanical unfolding of GB1. We found that three mutations, which are across the surfaces of two subdomains that are to be sheared by the applied stretching force, in the hydrophobic core (F30L, Y45L, and F52L) result in significant decrease in mechanical unfolding force of GB1. The mechanical unfolding force of these mutants drop by 50-90 pN compared with wild-type GB1, which unfolds at around 180 pN at a pulling speed of 400 nm/s. These results indicate that hydrophobic core packing plays an important role in determining the mechanical stability of GB1 and suggest that optimizing hydrophobic interactions across the surfaces that are to be sheared will likely be an efficient method to enhance the mechanical stability of GB1 and GB1 homologues.
Collapse
Affiliation(s)
- Tianjia Bu
- State Key Laboratory for Supramolecular Structure and Materials, Jilin University, Changchun, Jilin Province, P R China
| | | | | |
Collapse
|
18
|
Rico F, Su C, Scheuring S. Mechanical mapping of single membrane proteins at submolecular resolution. NANO LETTERS 2011; 11:3983-6. [PMID: 21800925 DOI: 10.1021/nl202351t] [Citation(s) in RCA: 87] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/23/2023]
Abstract
The capacity of proteins to carry out different functions is related to their ability to undergo conformation changes, which depends on the flexibility of protein structures. In this work, we applied a novel imaging mode based on indentation force spectroscopy to map quantitatively the flexibility of individual membrane proteins in their native, folded state at unprecedented submolecular resolution. Our results enabled us to correlate protein flexibility with crystal structure and showed that α-helices are stiff structures that may contribute importantly to the mechanical stability of membrane proteins, while interhelical loops appeared more flexible, allowing conformational changes related to function.
Collapse
Affiliation(s)
- Felix Rico
- Institut Curie, U1006 INSERM, 26 rue d'Ulm, 75005 Paris, France
| | | | | |
Collapse
|
19
|
Horejs C, Ristl R, Tscheliessnig R, Sleytr UB, Pum D. Single-molecule force spectroscopy reveals the individual mechanical unfolding pathways of a surface layer protein. J Biol Chem 2011; 286:27416-24. [PMID: 21690085 PMCID: PMC3149335 DOI: 10.1074/jbc.m111.251322] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/15/2011] [Revised: 06/15/2011] [Indexed: 12/14/2022] Open
Abstract
Surface layers (S-layers) represent an almost universal feature of archaeal cell envelopes and are probably the most abundant bacterial cell proteins. S-layers are monomolecular crystalline structures of single protein or glycoprotein monomers that completely cover the cell surface during all stages of the cell growth cycle, thereby performing their intrinsic function under a constant intra- and intermolecular mechanical stress. In gram-positive bacteria, the individual S-layer proteins are anchored by a specific binding mechanism to polysaccharides (secondary cell wall polymers) that are linked to the underlying peptidoglycan layer. In this work, atomic force microscopy-based single-molecule force spectroscopy and a polyprotein approach are used to study the individual mechanical unfolding pathways of an S-layer protein. We uncover complex unfolding pathways involving the consecutive unfolding of structural intermediates, where a mechanical stability of 87 pN is revealed. Different initial extensibilities allow the hypothesis that S-layer proteins adapt highly stable, mechanically resilient conformations that are not extensible under the presence of a pulling force. Interestingly, a change of the unfolding pathway is observed when individual S-layer proteins interact with secondary cell wall polymers, which is a direct signature of a conformational change induced by the ligand. Moreover, the mechanical stability increases up to 110 pN. This work demonstrates that single-molecule force spectroscopy offers a powerful tool to detect subtle changes in the structure of an individual protein upon binding of a ligand and constitutes the first conformational study of surface layer proteins at the single-molecule level.
Collapse
Affiliation(s)
| | - Robin Ristl
- From the Department for Nanobiotechnology and
| | - Rupert Tscheliessnig
- the Austrian Centre of Industrial Biotechnology, c/o Institute for Biotechnology, University of Natural Resources and Life Sciences, 1190 Vienna, Austria
| | | | - Dietmar Pum
- From the Department for Nanobiotechnology and
| |
Collapse
|
20
|
Enhancing the mechanical stability of proteins through a cocktail approach. Biophys J 2011; 100:1794-9. [PMID: 21463593 DOI: 10.1016/j.bpj.2011.02.030] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/05/2010] [Revised: 01/23/2011] [Accepted: 02/14/2011] [Indexed: 11/22/2022] Open
Abstract
Rationally enhancing the mechanical stability of proteins remains a challenge in the field of single molecule force spectroscopy. Here we demonstrate that it is feasible to use a "cocktail" approach for combining more than one approach to enhance significantly the mechanical stability of proteins in an additive fashion. As a proof of principle, we show that metal chelation and protein-protein interaction can be combined to enhance the unfolding force of a protein to ∼450 pN, which is >3 times of its original value. This is also higher than the mechanical stability of most of proteins studied so far. We also extend such a cocktail concept to combine two different metal chelation sites to enhance protein mechanical stability. This approach opens new avenues to efficiently regulating the mechanical properties of proteins, and should be applicable to a wide range of elastomeric proteins.
Collapse
|
21
|
Wang CC, Tsong TY, Hsu YH, Marszalek PE. Inhibitor binding increases the mechanical stability of staphylococcal nuclease. Biophys J 2011; 100:1094-9. [PMID: 21320455 DOI: 10.1016/j.bpj.2011.01.011] [Citation(s) in RCA: 26] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/19/2010] [Revised: 12/20/2010] [Accepted: 01/03/2011] [Indexed: 12/19/2022] Open
Abstract
Staphylococcal nuclease (SNase) catalyzes the hydrolysis of DNA and RNA in a calcium-dependent fashion. We used AFM-based single-molecule force spectroscopy to investigate the mechanical stability of SNase alone and in its complex with an SNase inhibitor, deoxythymidine 3',5'-bisphosphate. We found that the enzyme unfolds in an all-or-none fashion at ∼26 pN. Upon binding to the inhibitor, the mechanical unfolding forces of the enzyme-inhibitor complex increase to ∼50 pN. This inhibitor-induced increase in the mechanical stability of the enzyme is consistent with the increased thermodynamical stability of the complex over that of SNase. Because of its strong mechanical response to inhibitor binding, SNase, a model protein folding system, offers a unique opportunity for studying the relationship between enzyme mechanics and catalysis.
Collapse
Affiliation(s)
- Chien-Chung Wang
- Graduate Institute of Biotechnology, National Chung-Hsing University, Taichung, Taiwan, Republic of China. [corrected]
| | | | | | | |
Collapse
|
22
|
Graham TGW, Best RB. Force-Induced Change in Protein Unfolding Mechanism: Discrete or Continuous Switch? J Phys Chem B 2011; 115:1546-61. [DOI: 10.1021/jp110738m] [Citation(s) in RCA: 46] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
Affiliation(s)
- Thomas G. W. Graham
- Department of Chemistry, Cambridge University, Lensfield Road, Cambridge CB2 1EW, U.K
| | - Robert B. Best
- Department of Chemistry, Cambridge University, Lensfield Road, Cambridge CB2 1EW, U.K
| |
Collapse
|
23
|
Li H, Cao Y. Protein mechanics: from single molecules to functional biomaterials. Acc Chem Res 2010; 43:1331-41. [PMID: 20669937 DOI: 10.1021/ar100057a] [Citation(s) in RCA: 100] [Impact Index Per Article: 7.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Elastomeric proteins act as the essential functional units in a wide variety of biomechanical machinery and serve as the basic building blocks for biological materials that exhibit superb mechanical properties. These proteins provide the desired elasticity, mechanical strength, resilience, and toughness within these materials. Understanding the mechanical properties of elastomeric protein-based biomaterials is a multiscale problem spanning from the atomistic/molecular level to the macroscopic level. Uncovering the design principles of individual elastomeric building blocks is critical both for the scientific understanding of multiscale mechanics of biomaterials and for the rational engineering of novel biomaterials with desirable mechanical properties. The development of single-molecule force spectroscopy techniques has provided methods for characterizing mechanical properties of elastomeric proteins one molecule at a time. Single-molecule atomic force microscopy (AFM) is uniquely suited to this purpose. Molecular dynamic simulations, protein engineering techniques, and single-molecule AFM study have collectively revealed tremendous insights into the molecular design of single elastomeric proteins, which can guide the design and engineering of elastomeric proteins with tailored mechanical properties. Researchers are focusing experimental efforts toward engineering artificial elastomeric proteins with mechanical properties that mimic or even surpass those of natural elastomeric proteins. In this Account, we summarize our recent experimental efforts to engineer novel artificial elastomeric proteins and develop general and rational methodologies to tune the nanomechanical properties of elastomeric proteins at the single-molecule level. We focus on general design principles used for enhancing the mechanical stability of proteins. These principles include the development of metal-chelation-based general methodology, strategies to control the unfolding hierarchy of multidomain elastomeric proteins, and the design of novel elastomeric proteins that exhibit stimuli-responsive mechanical properties. Moving forward, we are now exploring the use of these artificial elastomeric proteins as building blocks of protein-based biomaterials. Ultimately, we would like to rationally tailor mechanical properties of elastomeric protein-based materials by programming the molecular sequence, and thus nanomechanical properties, of elastomeric proteins at the single-molecule level. This step would help bridge the gap between single protein mechanics and material biomechanics, revealing how the mechanical properties of individual elastomeric proteins are translated into the properties of macroscopic materials.
Collapse
Affiliation(s)
- Hongbin Li
- Department of Chemistry, The University of British Columbia, Vancouver, BC V6T 1Z1 Canada
| | - Yi Cao
- Department of Chemistry, The University of British Columbia, Vancouver, BC V6T 1Z1 Canada
| |
Collapse
|
24
|
Guerrero AR, Caballero L, Adeva A, Melo F, Kogan MJ. Exploring the surface charge on peptide-gold nanoparticle conjugates by force spectroscopy. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2010; 26:12026-12032. [PMID: 20557062 DOI: 10.1021/la1014237] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/29/2023]
Abstract
The conformation and charge exposure of peptides attached to colloidal gold nanoparticles (AuNPs) are critical for both the colloidal stability and for the recognition of biological targets in biomedical applications such as diagnostics and therapy. We prepared conjugates of AuNPs and three isomer peptides capable of recognizing toxic aggregates of the amyloid beta protein (Abeta) involved in Alzheimer's disease, namely, CLPFFD-CONH(2) (i0), CDLPFF-CONH(2) (i1), and CLPDFF-CONH(2) (i2), where D is the amino acid aspartic acid that is negatively charged at pH = 7.4. We then studied the effect of peptide sequence on the charge exposure through force spectroscopy measurements. The peptide-AuNPs conjugates were fixed on glass surfaces, and their interactions with peptide-functionalized tips were determined. Our results show a higher density of surface charge in the conjugates of the isomers i0 and i2 and a lower density in i1, which is due to the higher degree of functionalization in the first two compared with the third. However, the charge per molecule of the peptide is higher for i1 with respect to i0 and i2, which could be related to the local conformation that the peptides adopt on the surface. The acid-base behavior of the peptide anchored to the AuNPs is different than expected in aqueous solutions of free peptides, which could be related to the low accessibility of the NH(2)-terminal group belonging to the cysteine that is located near the AuNPs surface. In contrast with other techniques, the fixation of the peptide-AuNPs conjugates to a surface allows for characterization of the local charge exposure of peptides anchored to AuNPs over a wide range of pH.
Collapse
Affiliation(s)
- Ariel R Guerrero
- Materials and Surface Science Group, University of Windsor, 401 Sunset Avenue, Windsor, Ontario N9B 3P4, Canada
| | | | | | | | | |
Collapse
|
25
|
Unravelling the design principles for single protein mechanical strength. Curr Opin Struct Biol 2010; 20:508-17. [PMID: 20542682 DOI: 10.1016/j.sbi.2010.05.005] [Citation(s) in RCA: 56] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/31/2010] [Revised: 04/29/2010] [Accepted: 05/04/2010] [Indexed: 01/04/2023]
Abstract
In recent years single molecule manipulation techniques have improved to the extent that measurements of the mechanical strength of single proteins can now be undertaken routinely. This powerful new tool, coupled with theoretical frameworks to characterise the unfolding process, has enabled significant progress to be made in understanding the physical mechanisms that underlie protein mechanical strength. These design concepts have allowed the search for proteins with novel, mechanically strong folds to be automated and for previously mechanically characterised proteins to be engineered rationally. Methods to achieve the latter are diverse and include re-engineering of specific hydrophobic core residues, changing solvent conditions and the 'cross-linking' of side-chains that are separated in the rate-limiting unfolding transition. Predicting the mechanical behaviour of larger proteins and those with more complex structures remains a significant challenge while on-going instrument development is beginning to allow the examination of mechanical strength of protein across a wide range of force loading rates. The integral role of force in biology and the potential for exploitation of catalytic and structural proteins as functional bio-materials makes this a particularly important area of research.
Collapse
|
26
|
Understanding biology by stretching proteins: recent progress. Curr Opin Struct Biol 2010; 20:63-9. [PMID: 20138503 DOI: 10.1016/j.sbi.2010.01.003] [Citation(s) in RCA: 60] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/16/2009] [Revised: 01/11/2010] [Accepted: 01/12/2010] [Indexed: 01/29/2023]
Abstract
Single molecule manipulation techniques combined with molecular dynamics simulations and protein engineering have enabled, during the last decade, the mechanical properties of proteins to be studied directly, thereby giving birth to the field of protein nanomechanics. Recent data obtained from such techniques have helped gain insight into the structural bases of protein resistance against forced unfolding, as well as revealing structural motifs involved in mechanical stability. Also, important technical developments have provided new perspectives into protein folding. Eventually, new and exciting data have shown that mechanical properties are key factors in cell signaling and pathologies, and have been used to rationally tune these properties in a variety of proteins.
Collapse
|
27
|
Sadler DP, Petrik E, Taniguchi Y, Pullen JR, Kawakami M, Radford SE, Brockwell DJ. Identification of a mechanical rheostat in the hydrophobic core of protein L. J Mol Biol 2009; 393:237-48. [PMID: 19683005 PMCID: PMC2796179 DOI: 10.1016/j.jmb.2009.08.015] [Citation(s) in RCA: 43] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/27/2009] [Revised: 07/23/2009] [Accepted: 08/07/2009] [Indexed: 11/22/2022]
Abstract
The ability of proteins and their complexes to withstand or respond to mechanical stimuli is vital for cells to maintain their structural organisation, to relay external signals and to facilitate unfolding and remodelling. Force spectroscopy using the atomic force microscope allows the behaviour of single protein molecules under an applied extension to be investigated and their mechanical strength to be quantified. protein L, a simple model protein, displays moderate mechanical strength and is thought to unfold by the shearing of two mechanical sub-domains. Here, we investigate the importance of side-chain packing for the mechanical strength of protein L by measuring the mechanical strength of a series of protein L variants containing single conservative hydrophobic volume deletion mutants. Of the five thermodynamically destabilised variants characterised, only one residue (I60V) close to the interface between two mechanical sub-domains was found to differ in mechanical properties to wild type (ΔFI60V–WT = − 36 pN at 447 nm s− 1, ΔxuI60V–WT = 0.2 nm). Φ-value analysis of the unfolding data revealed a highly native transition state. To test whether the number of hydrophobic contacts across the mechanical interface does affect the mechanical strength of protein L, we measured the mechanical properties of two further variants. protein L L10F, which increases core packing but does not enhance interfacial contacts, increased mechanical strength by 13 ± 11 pN at 447 nm s− 1. By contrast, protein L I60F, which increases both core and cross-interface contacts, increased mechanical strength by 72 ± 13 pN at 447 nm s− 1. These data suggest a method by which nature can evolve a varied mechanical response from a limited number of topologies and demonstrate a generic but facile method by which the mechanical strength of proteins can be rationally modified.
Collapse
Affiliation(s)
- David P Sadler
- Astbury Centre for Structural Molecular Biology, Institute of Molecular and Cellular Biology, University of Leeds, Leeds LS2 9JT, UK
| | | | | | | | | | | | | |
Collapse
|
28
|
Modulating the Mechanical Stability of Extracellular Matrix Protein Tenascin-C in a Controlled and Reversible Fashion. J Mol Biol 2009; 390:820-9. [DOI: 10.1016/j.jmb.2009.05.057] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/10/2009] [Revised: 05/14/2009] [Accepted: 05/19/2009] [Indexed: 11/18/2022]
|
29
|
Makarov DE. A theoretical model for the mechanical unfolding of repeat proteins. Biophys J 2009; 96:2160-7. [PMID: 19289042 DOI: 10.1016/j.bpj.2008.12.3899] [Citation(s) in RCA: 25] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/16/2008] [Revised: 11/26/2008] [Accepted: 12/08/2008] [Indexed: 11/18/2022] Open
Abstract
We consider the mechanical stretching of a polypeptide chain formed by multiple interacting repeats. The folding thermodynamics and the interactions among the repeats are described by the Ising model. Unfolded repeats act as soft entropic springs, whereas folded repeats respond to a force as stiffer springs. We show that the resulting force-extension curve may exhibit a pronounced force maximum corresponding to the unfolding of the first repeat. This event is followed by the unfolding of the remaining repeats, which takes place at a lower force. As the protein extension is increased, the force-extension curve of a sufficiently long repeat protein displays a plateau, where the force remains nearly constant and the protein unfolds sequentially so that the number of unfolded repeats is proportional to the extension. Such a sequential mechanical unfolding mechanism is displayed even by the repeat proteins whose thermal denaturation is highly cooperative, provided that they are long enough. By contrast, the unfolding of short repeat progressions can be cooperative.
Collapse
Affiliation(s)
- Dmitrii E Makarov
- Department of Chemistry and Biochemistry and Institute for Theoretical Chemistry, University of Texas at Austin, Austin, Texas, USA.
| |
Collapse
|
30
|
Single molecule force spectroscopy reveals engineered metal chelation is a general approach to enhance mechanical stability of proteins. Proc Natl Acad Sci U S A 2008; 105:11152-7. [PMID: 18685107 DOI: 10.1073/pnas.0803446105] [Citation(s) in RCA: 88] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/03/2023] Open
Abstract
Significant mechanical stability is an essential feature shared by many elastomeric proteins, which function as molecular springs in a wide variety of biological machinery and biomaterials of superb mechanical properties. Despite the progress in understanding molecular determinants of mechanical stability, it remains challenging to rationally enhance the mechanical stability of proteins. Using single molecule force spectroscopy and protein engineering techniques, we demonstrate that engineered bi-histidine metal chelation can enhance the mechanical stability of proteins significantly and reversibly. Based on simple thermodynamic cycle analysis, we engineered a bi-histidine metal chelation site into various locations of the small protein, GB1, to achieve preferential stabilization of the native state over the mechanical unfolding transition state of GB1 through the binding of metal ions. Our results demonstrate that the metal chelation can enhance the mechanical stability of GB1 by as much as 100 pN. Since bi-histidine metal chelation sites can be easily implemented, engineered metal chelation provides a general methodology to enhance the mechanical stability of a wide variety of proteins. This general approach in protein mechanics will enable the rational tuning of the mechanical stability of proteins. It will not only open new avenues toward engineering proteins of tailored nanomechanical properties, but also provide new approaches to systematically map the mechanical unfolding pathway of proteins.
Collapse
|
31
|
Cao Y, Li H. Engineered elastomeric proteins with dual elasticity can be controlled by a molecular regulator. NATURE NANOTECHNOLOGY 2008; 3:512-516. [PMID: 18685641 DOI: 10.1038/nnano.2008.168] [Citation(s) in RCA: 36] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/30/2008] [Accepted: 05/23/2008] [Indexed: 05/26/2023]
Abstract
Elastomeric proteins are molecular springs that confer excellent mechanical properties to many biological tissues and biomaterials. Depending on the role performed by the tissue or biomaterial, elastomeric proteins can behave as molecular springs or shock absorbers. Here we combine single-molecule atomic force microscopy and protein engineering techniques to create elastomeric proteins that can switch between two distinct types of mechanical behaviour in response to the binding of a molecular regulator. The proteins are mechanically labile by design and behave as entropic springs with an elasticity that is governed by their configurational entropy. However, when a molecular regulator binds to the protein, it switches into a mechanically stable state and can act as a shock absorber. These engineered proteins effectively mimic and combine the two extreme forms of elastic behaviour found in natural elastomeric proteins, and thus represent a new type of smart nanomaterial that will find potential applications in nanomechanics and material sciences.
Collapse
|