Identification of a unique "stability control region" that controls protein stability of tropomyosin: A two-stranded alpha-helical coiled-coil

PolyQ length-based molecular encoding of vocalization frequency in FOXP2

The transcription factor FOXP2, a regulator of vocalization- and speech/language-related phenotypes, contains two long polyQ repeats (Q1 and Q2) displaying marked, still enigmatic length variation across mammals. We found that the Q1/Q2 length ratio quantitatively encodes vocalization frequency ranges, from the infrasonic to the ultrasonic, displaying striking convergent evolution patterns. Thus, species emitting ultrasonic vocalizations converge with bats in having a low ratio, whereas species vocalizing in the low-frequency/infrasonic range converge with elephants and whales, which have higher ratios. Similar, taxon-specific patterns were observed for the FOXP2-related protein FOXP1. At the molecular level, we observed that the FOXP2 polyQ tracts form coiled coils, assembling into condensates and fibrils, and drive liquid-liquid phase separation (LLPS). By integrating evolutionary and molecular analyses, we found that polyQ length variation related to vocalization frequency impacts FOXP2 structure, LLPS, and transcriptional activity, thus defining a novel form of polyQ length-based molecular encoding of vocalization frequency.

Understanding the Mechanism of Increased IgG/IgE Reactivity but Decreased Immunodetection Recovery in Thermally Induced Shrimp (Litopenaeus vannamei) Tropomyosin via Multispectroscopic and Molecular Dynamics Simulation Techniques

Despite the fact that tropomyosin (TM) has highly stable structural characteristics, thermal processing can adversely influence its immunodetection, and the mechanism involved has not been elucidated. Purified TM was heated at various temperatures, and then the IgG/IgE-binding capacity and immunodetection recovery were determined; meanwhile, the structural alterations were analyzed via spectroscopic and molecular dynamics simulation techniques. The obtained results demonstrated that heat-treated TM showed significantly increased IgG/IgE reactivity, confirmed by indirect ELISA and immunoblotting analysis, which might be attributed to the increased structural flexibility, and thus allowed TM to be recognized IgG/IgE easily. However, these structural alterations during thermal processing would contribute to the masking of some epitopes located in TM's surface due to the presence of curled or folded conformation with a considerable reduction of the solvent-accessible surface and radius of gyration, which primarily caused immunodetection recovery reduction in the sandwich ELISA (sELISA) test. The number of antigen binding sites might play a crucial role in a sandwich immunodetection system for sensitive and precise analysis in processed foods.

A Folding Insulator Defines Cryptic Domains in Tropomyosin

Multidomain proteins are the product of evolutionary selection for diversity of function through concatenation and repurposing of existing modular units of structures. In structures of proteins with multiple domains, components are often globular units stitched together with flexible linkers. Multidomain proteins often fold as multiple distinct order-disorder transitions. However, the relationship between structure and folding is not always straightforward. Tropomyosin binds to actin in muscle and cytoskeletal filaments. The structure is that of a continuous ɑ-helix lacking domain boundaries, but unfolding shows distinct transitions suggesting at least three possible domains do exist. To explore how domains might occur in a continuous structure, we used Lifson-Roig helix-coil models with sequence domains of varying helical nucleation propensities. Of these models, ones with a central folding insulator, separating folding of N- and C-terminal domains, are most consistent with experimental folding studies. The positions of domain boundaries are identified by hydrogen-deuterium exchange mass spectrometry. The presence of structurally cryptic folding domains in tropomyosin could relate to its evolution and explain the uneven distribution of deleterious mutations that lead to various cardiomyopathies.

Threonine-77 Is a Determinant of the Low-Temperature Conditioning of the Most Abundant Isoform of Tropomyosin in Atlantic Salmon

The Atlantic salmon Salmo salar survives below 10 °C. The main skeletal muscle is composed of a single isoform of tropomyosin (classified as Tpm1 α-fast) that is >92% identical to the mammalian homologue. How salmon Tpm1 maintains flexibility is investigated by reversing the only full charge substitution; threonine-77(g) in salmon and lysine in other vertebrates. The mutation (Thr-77 to Lys), which falls within a known destabilizing alanine cluster, (i) yields a useful electrophoretic shift in the absence and presence of an anionic detergent, (ii) increases the T_ms of both cooperative transitions (calorimetry, 0.1 M salt, pH 7) [35 °C (minor) and 44 °C (major); ΔT_m1 = 5 °C, ΔT_m2 = 3.5 °C], (iii) increases the T_m of CN1A (residues 11-127) to 53 °C (ΔT_m = 13 °C), a value similar to that of mammalian CN1A, (iv) markedly reduces the rate of proteolysis at Leu-169, and (v) weakens the affinity of salmon Tpm1 for troponin-Sepharose. Glu-82(e), the interstrand ionic partner of Lys-77(g), is conserved. The change in ionic interactions at this locus is postulated to be "sensed" in actin period 5 (residues 166-207) and likely beyond. Wild type (acetylated) salmon Tmp1 binds more tightly to F-actin at 4 °C than at 22 °C, which is the opposite of the long-known relationship displayed by the mammalian homologue. All of the evidence indicates that the presence of a neutral 77th amino acid destabilizes a sizable portion of salmon Tpm1 that includes the midregion. Threonine-77 is a key factor in rescuing the thin filament from the peril of cold-induced rigidity.

Influence of thermal treatment on the characteristics of major oyster allergen Cra g 1 (tropomyosin)

BACKGROUND

Shellfish, including oysters, often cause allergic reactions in adults. Thermal treatment is one of the most common technologies for dealing with seafood, which may affect biological properties. The present study aimed to evaluate the impact of heating on the conformation and potential allergenicity of oyster-derived tropomyosin (Cra g 1).

RESULTS

Sodium dodecylsulphate-polyacrylamide gel electrophoresis showed that there was an apparent band at 35 kDa of raw tropomyosin after purification and more significant polymers appeared in the heated protein. Interestingly, obvious changes in the intensity of the circular dichroism signal and 1-anilino-8-naphthalene sulfonate-binding fluorescence were observed especially in the case of the roasted form, which was associated with an increase in antibody reactivity. The degree of immunoglobulin (Ig)E binding of this treatment was demonstrated in the order roasted > boiled > raw. Furthermore, sequence alignment and amino acid composition revealed that Cra g 1 shared relatively high homology to tropomyosins from other shellfish and was also abundant in lysine that was apt to be modified by reducing sugars during heating.

CONCLUSION

Heated Cra g 1 produces higher IgE reactivity than the raw form as a result of the denaturation and formation of polymers. These findings will benefit the diagnosis and management of potential allergenicity as a result of shellfish. © 2018 Society of Chemical Industry.

Functional role of the core gap in the middle part of tropomyosin

Tropomyosin (Tpm) is an α-helical coiled-coil actin-binding protein playing an essential role in the regulation of muscle contraction. The middle part of the Tpm molecule has some specific features, such as the presence of noncanonical residues as well as a substantial gap at the interhelical interface, which are believed to destabilize a coiled-coil and impart structural flexibility to this part of the molecule. To study how the gap affects structural and functional properties of α-striated Tpm (the Tpm1.1 isoform that is expressed in cardiac and skeletal muscles) we replaced large conserved apolar core residues located at both sides of the gap with smaller ones by mutations M127A/I130A and M141A/Q144A. We found that in contrast with the stabilizing substitutions D137L and G126R studied earlier, these substitutions have no appreciable influence on thermal unfolding and domain structure of the Tpm molecule. They also do not affect actin-binding properties of Tpm. However, they strongly increase sliding velocity of regulated actin filaments in an in vitro motility assay and cause an oversensitivity of the velocity to Ca²⁺ similar to the stabilizing substitutions D137L and G126R. Molecular dynamics shows that the substitutions studied here increase bending stiffness of the coiled-coil structure of Tpm, like that of G126R/D137L, probably due to closure of the interhelical gap in the area of the substitutions. Our results clearly indicate that the conserved middle part of Tpm is important for the fine tuning of the Ca²⁺ regulation of actin-myosin interaction in muscle.

Coiled coils as possible models of protein structure evolution

Coiled coils are formed by two or more α-helices wrapped around one another. This structural motif often guides di-, tri- or multimerization of proteins involved in diverse biological processes such as membrane fusion, signal transduction and the organization of the cytoskeleton. Although coiled coil motifs seem conceptually simple and their existence was proposed in the early 1950s, the high variability of the motif makes coiled coil prediction from sequence a difficult task. They might be confused with intrinsically disordered sequences and even more with a recently described structural motif, the charged single α-helix. By contrast, the versatility of coiled coil structures renders them an ideal candidate for protein (re)design and many novel variants have been successfully created to date. In this paper, we review coiled coils in the light of protein evolution by putting our present understanding of the motif and its variants in the context of structural interconversions. We argue that coiled coils are ideal subjects for studies of subtle and large-scale structural changes because of their well-characterized and versatile nature.

Mechanistic heterogeneity in contractile properties of α-tropomyosin (TPM1) mutants associated with inherited cardiomyopathies

The most frequent known causes of primary cardiomyopathies are mutations in the genes encoding sarcomeric proteins. Among those are 30 single-residue mutations in TPM1, the gene encoding α-tropomyosin. We examined seven mutant tropomyosins, E62Q, D84N, I172T, L185R, S215L, D230N, and M281T, that were chosen based on their clinical severity and locations along the molecule. The goal of our study was to determine how the biochemical characteristics of each of these mutant proteins are altered, which in turn could provide a structural rationale for treatment of the cardiomyopathies they produce. Measurements of Ca(2+) sensitivity of human β-cardiac myosin ATPase activity are consistent with the hypothesis that hypertrophic cardiomyopathies are hypersensitive to Ca(2+) activation, and dilated cardiomyopathies are hyposensitive. We also report correlations between ATPase activity at maximum Ca(2+) concentrations and conformational changes in TnC measured using a fluorescent probe, which provide evidence that different substitutions perturb the structure of the regulatory complex in different ways. Moreover, we observed changes in protein stability and protein-protein interactions in these mutants. Our results suggest multiple mechanistic pathways to hypertrophic and dilated cardiomyopathies. Finally, we examined a computationally designed mutant, E181K, that is hypersensitive, confirming predictions derived from in silico structural analysis.

Association of polyalanine and polyglutamine coiled coils mediates expansion disease-related protein aggregation and dysfunction

The expansion of homopolymeric glutamine (polyQ) or alanine (polyA) repeats in certain proteins owing to genetic mutations induces protein aggregation and toxicity, causing at least 18 human diseases. PolyQ and polyA repeats can also associate in the same proteins, but the general extent of their association in proteomes is unknown. Furthermore, the structural mechanisms by which their expansion causes disease are not well understood, and these repeats are generally thought to misfold upon expansion into aggregation-prone β-sheet structures like amyloids. However, recent evidence indicates a critical role for coiled-coil (CC) structures in triggering aggregation and toxicity of polyQ-expanded proteins, raising the possibility that polyA repeats may as well form these structures, by themselves or in association with polyQ. We found through bioinformatics screenings that polyA, polyQ and polyQA repeats have a phylogenetically graded association in human and non-human proteomes and associate/overlap with CC domains. Circular dichroism and cross-linking experiments revealed that polyA repeats can form—alone or with polyQ and polyQA—CC structures that increase in stability with polyA length, forming higher-order multimers and polymers in vitro. Using structure-guided mutagenesis, we studied the relevance of polyA CCs to the in vivo aggregation and toxicity of RUNX2—a polyQ/polyA protein associated with cleidocranial dysplasia upon polyA expansion—and found that the stability of its polyQ/polyA CC controls its aggregation, localization and toxicity. These findings indicate that, like polyQ, polyA repeats form CC structures that can trigger protein aggregation and toxicity upon expansion in human genetic diseases.

Coiled-coil response to mechanical force: global stability and local cracking

Coiled coils are important structural motifs formed by two or more amphipathic α-helices that twist into a supercoil. These motifs are found in a wide range of proteins, including motor proteins and structural proteins, that are known to transmit mechanical loads. We analyze atomically detailed simulations of coiled-coil cracking under load with Milestoning. Milestoning is an approach that captures the main features of the process in a network, quantifying kinetics and thermodynamics. A 112-residue segment of the β-myosin S2 domain was subjected to constant-magnitude (0-200 pN) and constant-direction tensile forces in molecular dynamics simulations. Twenty 20 ns straightforward simulations at several load levels revealed that initial single-residue cracking events (Ψ > 90°) at loads <100 pN were accompanied by rapid refolding without either intra- or interhelix unfolding propagation. Only initial unfolding events at the highest load (200 pN) regularly propagated along and between helices. Analysis of hydrophobic interactions and of interhelix hydrogen bonds did not show significant variation as a function of load. Unfolding events were overwhelmingly located in the vicinity of E929, a charged residue in a hydrophobic position of the heptad repeat. Milestoning network analysis of E929 cracking determined that the mean first-passage time ranges from 20 ns (200 pN) to 80 ns (50 pN), which is ∼20 times the mean first-passage time of an isolated helix with the same sequence.

Tropomyosin dynamics

Tropomyosin is a two chained α-helical coiled coil protein that binds actin filaments and interacts with various actin binding proteins. Tropomyosin function depends on its ability to move to distinct locations on the surface of actin in response to the binding of different thin filament effectors. Tropomyosin dynamics plays an important role in these fluctuating interactions with actin and is thought to be fundamental to many of its biological activities. For example tropomyosin concerted movement on the surface of actin triggered by Ca(2+) binding to troponin or myosin head binding to actin has been argued to be key to the cooperative allosteric regulation of muscle contraction. These large-scale motions are affected by tropomyosin internal dynamics and mechanical properties. Tropomyosin internal dynamics corresponding to smaller and more localised structural fluctuations are increasingly recognised to play an important role in its function. A thorough understanding of the coupling between local and global structural fluctuations in tropomyosin is required to understand how time dependent structural fluctuations in tropomyosin contribute to the overall thin filament dynamics and dictate their various biological activities.

Transmission of stability information through the N-domain of tropomyosin is interrupted by a stabilizing mutation (A109L) in the hydrophobic core of the stability control region (residues 97-118)

Tropomyosin (Tm) is an actin-binding, thin filament, two-stranded α-helical coiled-coil critical for muscle contraction and cytoskeletal function. We made the first identification of a stability control region (SCR), residues 97-118, in the Tm sequence that controls overall protein stability but is not required for folding. We also showed that the individual α-helical strands of the coiled-coil are stabilized by Leu-110, whereas the hydrophobic core is destabilized in the SCR by Ala residues at three consecutive d positions. Our hypothesis is that the stabilization of the individual α-helices provides an optimum stability and allows functionally beneficial dynamic motion between the α-helices that is critical for the transmission of stabilizing information along the coiled-coil from the SCR. We prepared three recombinant (rat) Tm(1-131) proteins, including the wild type sequence, a destabilizing mutation L110A, and a stabilizing mutation A109L. These proteins were evaluated by circular dichroism (CD) and differential scanning calorimetry. The single mutation L110A destabilizes the entire Tm(1-131) molecule, showing that the effect of this mutation is transmitted 165 Å along the coiled-coil in the N-terminal direction. The single mutation A109L prevents the SCR from transmitting stabilizing information and separates the coiled-coil into two domains, one that is ∼9 °C more stable than wild type and one that is ∼16 °C less stable. We know of no other example of the substitution of a stabilizing Leu residue in a coiled-coil hydrophobic core position d that causes this dramatic effect. We demonstrate the importance of the SCR in controlling and transmitting the stability signal along this rodlike molecule.

Polymorphism in tropomyosin structure and function

Tropomyosins (Tm) in humans are expressed from four distinct genes and by alternate splicing >40 different Tm polypeptide chains can be made. The functional Tm unit is a dimer of two parallel polypeptide chains and these can be assembled from identical (homodimer) or different (heterodimer) polypeptide chains provided both chains are of the same length. Since most cells express multiple isoforms of Tm, the number of different homo and heterodimers that can be assembled becomes very large. We review the mechanism of dimer assembly and how preferential assembly of some heterodimers is driven by thermodynamic stability. We examine how in vitro studies can reveal functional differences between Tm homo and heterodimers (stability, actin affinity, flexibility) and the implication for how there could be selection of Tm isomers in the assembly on to an actin filament. The role of Tm heterodimers becomes more complex when mutations in Tm are considered, such as those associated with cardiomyopathies, since mutations can appear in only one of the chains.

Coiled-coil-mediated grafting of bioactive vascular endothelial growth factor

Chimeric growth factors may represent a powerful alternative to their natural counterparts for the functionalization of tissue-engineered scaffolds and applications in regenerative medicine. Their rational design should provide a simple, readily scalable production strategy while improving retention at the site of action. In that endeavor, we here report the synthesis of a chimeric protein corresponding to human vascular endothelial growth factor 165 being N-terminally fused to an E5 peptide tag (E5-VEGF). E5-VEGF was successfully expressed as a homodimer in mammalian cells. Following affinity purification, in vitro surface plasmon resonance biosensing and cell survival assays confirmed diffusible E5-VEGF ability to bind to its receptor ectodomains, while observed morphological phenotypes confirmed its anti-apoptotic features. Additional surface plasmon resonance assays highlighted that E5-VEGF could be specifically captured with high stability when interacting with covalently immobilized K5 peptide (a synthetic peptide designed to bind to the E5 moiety of chimeric hVEGF). This immobilization strategy was applied to glass substrates and chimeric hVEGF was shown to be maintained in a functionally active state following capture. Altogether, our data demonstrated that stable hVEGF capture can be performed via coiled-coil interactions without impacting hVEGF bioactivity, thus opening up the way to future applications in the field of tissue engineering and regenerative medicine.

Structural and immunological characterization of recombinant Pan b 1, a major allergen of northern shrimp, Pandalus borealis

BACKGROUND

Shellfish allergy is one of the major causes of life-threatening allergic reactions to food. The shrimp species Pandalus borealis is the commercially most important coldwater shrimp species, and its protein extract is commonly used in shrimp allergy diagnostics. However, the DNA sequence of its major allergen, tropomyosin, designated Pan b 1, was not previously described. Our aim was to identify the cDNA sequence of Pan b 1 and to generate a recombinant protein with similar structure and allergenicity as the natural protein.

METHODS

P. borealis shrimps were caught in the Oslofjord (Norway). cDNA from Pan b 1 was generated, an N-terminal histidine tag was added, and the protein was expressed in Escherichia coli. The recombinant Pan b 1 was characterized by structural and IgE-binding studies and investigated further with basophil activation tests (BATs) and skin prick tests (SPTs) on Norwegian shrimp-allergic individuals.

RESULTS

The open reading frame encoded 284 amino acids that shared 97-100% identity with other shrimp tropomyosins. Mass spectroscopy of natural Pan b 1 confirmed the protein's molecular mass and indicated the absence of posttranslational modifications. Circular dichroism spectroscopy revealed virtually identical spectra between recombinant and natural Pan b 1, which together with native PAGE and size exclusion chromatography results indicated a similar structure. Furthermore, immunoblot and ELISA studies as well as BATs and SPTs showed equivalent results of recombinant and natural Pan b 1.

CONCLUSION

A recombinant tropomyosin from P. borealis was generated that can be used in diagnostics and further studies on tropomyosin allergenicity and specific immunotherapy.

A repeated coiled-coil interruption in the Escherichia coli condensin MukB

MukB, a divergent structural maintenance of chromosomes (SMC) protein, is important for chromosome segregation and condensation in Escherichia coli and other γ-proteobacteria. MukB and canonical SMC proteins share a common five-domain structure in which globular N- and C-terminal regions combine to form an ATP-binding-cassette-like ATPase domain. This ATPase domain is connected to a central, globular dimerization domain by a long antiparallel coiled coil. The structures of both globular domains have been solved recently. In contrast, little is known about the coiled coil, in spite of its clear importance for SMC function. Recently, we identified interacting regions on the N- and C-terminal halves of the MukB coiled coil through photoaffinity cross-linking experiments. On the basis of these low-resolution experimental constraints, phylogenetic data, and coiled-coil prediction analysis, we proposed a preliminary model in which the MukB coiled coil is divided into multiple segments. Here, we use a disulfide cross-linking assay to detect paired residues on opposite strands of MukB's coiled coil. This method provides accurate register data and demonstrates the presence of at least five coiled-coil segments in this domain. Moreover, these studies show that the segments are interrupted by a repeated, unprecedented deviation from canonical coiled-coil structure. These experiments provide a sufficiently detailed view of the MukB coiled coil to allow rational manipulation of this region for the first time, opening the door for structure-function studies of this domain.

Tropomyosin isoforms and reagents

Tropomyosins are rod-like dimers which form head-to-tail polymers along the length of actin filaments and regulate the access of actin binding proteins to the filaments.1 The diversity of tropomyosin isoforms, over 40 in mammals, and their role in an increasing number of biological processes presents a challenge both to experienced researchers and those new to this field. The increased appreciation that the role of these isoforms expands beyond that of simply stabilizing actin filaments has lead to a surge of reagents and techniques to study their function and mechanisms of action. This report is designed to provide a basic guide to the genes and proteins and the availability of reagents which allow effective study of this family of proteins. We highlight the value of combining multiple techniques to better evaluate the function of different tm isoforms and discuss the limitations of selected reagents. Brief background material is included to demystify some of the unfortunate complexity regarding this multi-gene family of proteins including the unconventional nomenclature of the isoforms and the evolutionary relationships of isoforms between species. Additionally, we present step-by-step detailed experimental protocols used in our laboratory to assist new comers to the field and experts alike.

Conserved noncanonical residue Gly-126 confers instability to the middle part of the tropomyosin molecule

Tropomyosin (Tm) is a two-stranded α-helical coiled-coil protein with a well established role in regulation of actin cytoskeleton and muscle contraction. It is believed that many Tm functions are enabled by its flexibility whose nature has not been completely understood. We hypothesized that the well conserved non-canonical residue Gly-126 causes local destabilization of Tm. To test this, we substituted Gly-126 in skeletal muscle α-Tm either with an Ala residue, which should stabilize the Tm α-helix, or with an Arg residue, which is expected to stabilize both α-helix and coiled-coil structure of Tm. We have shown that both mutations dramatically reduce the rate of Tm proteolysis by trypsin at Asp-133. Differential scanning calorimetry was used for detailed investigation of thermal unfolding of the Tm mutants, both free in solution and bound to F-actin. It was shown that a significant part of wild type Tm unfolds in a non-cooperative manner at low temperature, and both mutations confer cooperativity to this part of the Tm molecule. The size of the flexible middle part of Tm is estimated to be 60-70 amino acid residues, about a quarter of the Tm molecule. Thus, our results show that flexibility is unevenly distributed in the Tm molecule and achieves the highest extent in its middle part. We conclude that the highly conserved Gly-126, acting in concert with the previously identified non-canonical Asp-137, destabilizes the middle part of Tm, resulting in a more flexible region that is important for Tm function.

Essential role of coiled coils for aggregation and activity of Q/N-rich prions and PolyQ proteins

The functional switch of glutamine/asparagine (Q/N)-rich prions and the neurotoxicity of polyQ-expanded proteins involve complex aggregation-prone structural transitions, commonly presumed to be forming β sheets. By analyzing sequences of interaction partners of these proteins, we discovered a recurrent presence of coiled-coil domains both in the partners and in segments that flank or overlap Q/N-rich and polyQ domains. Since coiled coils can mediate protein interactions and multimerization, we studied their possible involvement in Q/N-rich and polyQ aggregations. Using circular dichroism and chemical crosslinking, we found that Q/N-rich and polyQ peptides form α-helical coiled coils in vitro and assemble into multimers. Using structure-guided mutagenesis, we found that coiled-coil domains modulate in vivo properties of two Q/N-rich prions and polyQ-expanded huntingtin. Mutations that disrupt coiled coils impair aggregation and activity, whereas mutations that enhance coiled-coil propensity promote aggregation. These findings support a coiled-coil model for the functional switch of Q/N-rich prions and for the pathogenesis of polyQ-expansion diseases.

Polydispersity as a parameter for indicating the thermal stability of proteins by dynamic light scattering

A physical parameter for predicting the thermal stability of proteins was provided by a new approach using dynamic light scattering (DLS). The relationship between the melting point measured by differential scanning calorimetry (DSC) and the polydispersity of the hydrodynamic diameter determined by DLS analysis was examined. Calmodulin (CaM) and concanavalin A (ConA) were used as model proteins. The melting point measured by DSC, an indicator for thermal stability, increased and the polydispersity decreased on binding of the proteins to specific ligands, suggesting that the polydispersity could be used an indicator to predict thermal stability. In addition, the increase of thermal stability that resulted from forming a complex could be quantified by polydispersity analysis even when the melting point changed only slightly.

Critical interactions in the stability control region of tropomyosin

Our laboratory has recently described a stability control region in the two-stranded alpha-helical coiled-coil alpha-tropomyosin that accounts for overall protein stability but is not required for folding (Hodges et al., 2009). We have used a synthetic peptide approach to investigate three stability control sites within the stability control region (residues 97-118). Two of the sites, electrostatic cluster 1 (97-104, EELDRAQE) and electrostatic cluster 2 (112-118, KLEEAEK), feature sequences with unusually high charge density and the potential to form multiple intrachain and interchain salt bridges (ionic attractions). A third site (105-111, RLATALQ) features an e position Leu residue, an arrangement known previously to enhance coiled-coil stability modestly. A native peptide and seven peptide analogs of the tropomyosin sequence 85-119 were prepared by Fmoc solid-phase peptide synthesis. Thermal stability measurements by circular dichroism (CD) spectroscopy revealed the following T(m) values for the native peptide and three key analogs: 52.9 degrees C (Native), 46.0 degrees C (R101A), 45.3 degrees C (K112A/K118A), and 27.9 degrees C (L110A). The corresponding DeltaT(m) values for the analogs, relative to the native peptide, are -6.9 degrees C, -7.6 degrees C, and -25.0 degrees C, respectively. The dramatic contribution to stability made by L110e is three times greater than the contribution of either electrostatic cluster 1 or 2, likely resulting from a novel hydrophobic interaction not previously observed. These thermal stability results were corroborated by temperature profiling analyses using reversed-phase high-performance liquid chromatography (RP-HPLC). We believe that the combined contributions of the interactions within the three stability control sites are responsible for the effect of the stability control region in tropomyosin, with the Leu110e contribution being most critical.

What makes tropomyosin an actin binding protein? A perspective

Tropomyosin is a two-chained alpha-helical coiled coil that binds along the length of the actin filament and regulates its function. The paper addresses the question of how a "simple" coiled-coil sequence encodes the information for binding and regulating the actin filament, its universal target. Determination of the tropomyosin sequence confirmed Crick's predicted heptapeptide repeat of hydrophobic interface residues and revealed additional features that have been shown to be important for its function: a 7-fold periodicity predicted to correspond to actin binding sites and interruptions of the canonical interface with destabilizing residues, such as Ala. Evidence from published work is summarized, leading to the proposal of a paradigm that binding of tropomyosin to the actin filament requires local instability as well as regions of flexibility. The flexibility derives from bends and local unfolding at regions with a destabilized coiled-coil interface, as well as from the dynamic end-to-end complex. The features are required for tropomyosin to assume the form of the helical actin filament, and to bind to actin monomers along its length. The requirement of instability/flexibility for binding may be generalized to the binding of other coiled coils to their targets.

The S helix mediates signal transmission as a HAMP domain coiled-coil extension in the NarX nitrate sensor from Escherichia coli K-12

In the nitrate-responsive, homodimeric NarX sensor, two cytoplasmic membrane alpha-helices delimit the periplasmic ligand-binding domain. The HAMP domain, a four-helix parallel coiled-coil built from two alpha-helices (HD1 and HD2), immediately follows the second transmembrane helix. Previous computational studies identified a likely coiled-coil-forming alpha-helix, the signaling helix (S helix), in a range of signaling proteins, including eucaryal receptor guanylyl cyclases, but its function remains obscure. In NarX, the HAMP HD2 and S-helix regions overlap and apparently form a continuous coiled-coil marked by a heptad repeat stutter discontinuity at the distal boundary of HD2. Similar composite HD2-S-helix elements are present in other sensors, such as Sln1p from Saccharomyces cerevisiae. We constructed deletions and missense substitutions in the NarX S helix. Most caused constitutive signaling phenotypes. However, strongly impaired induction phenotypes were conferred by heptad deletions within the S-helix conserved core and also by deletions that remove the heptad stutter. The latter observation illuminates a key element of the dynamic bundle hypothesis for signaling across the heptad stutter adjacent to the HAMP domain in methyl-accepting chemotaxis proteins (Q. Zhou, P. Ames, and J. S. Parkinson, Mol. Microbiol. 73:801-814, 2009). Sequence comparisons identified other examples of heptad stutters between a HAMP domain and a contiguous coiled-coil-like heptad repeat sequence in conventional sensors, such as CpxA, EnvZ, PhoQ, and QseC; other S-helix-containing sensors, such as BarA and TorS; and the Neurospora crassa Nik-1 (Os-1) sensor that contains a tandem array of alternating HAMP and HAMP-like elements. Therefore, stutter elements may be broadly important for HAMP function.