1
|
Bernard AR, ElSayed MSA. Design, Manufacturing, and Analysis of Periodic Three-Dimensional Cellular Materials for Energy Absorption Applications: A Critical Review. MATERIALS (BASEL, SWITZERLAND) 2024; 17:2181. [PMID: 38793248 PMCID: PMC11122817 DOI: 10.3390/ma17102181] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/07/2024] [Revised: 04/19/2024] [Accepted: 04/24/2024] [Indexed: 05/26/2024]
Abstract
Cellular materials offer industries the ability to close gaps in the material selection design space with properties not otherwise achievable by bulk, monolithic counterparts. Their superior specific strength, stiffness, and energy absorption, as well as their multi-functionality, makes them desirable for a wide range of applications. The objective of this paper is to compile and present a review of the open literature focusing on the energy absorption of periodic three-dimensional cellular materials. The review begins with the methodical cataloging of qualitative and quantitative elements from 100 papers in the available literature and then provides readers with a thorough overview of the state of this research field, discussing areas such as parent material(s), manufacturing methods, cell topologies, cross-section shapes for truss topologies, analysis methods, loading types, and test strain rates. Based on these collected data, areas of great and limited research are identified and future avenues of interest are suggested for the continued maturation and growth of this field, such as the development of a consistent naming and classification system for topologies; the creation of test standards considering additive manufacturing processes; further investigation of non-uniform and non-cylindrical struts on the performance of truss lattices; and further investigation into the performance of lattice materials under the impact of non-flat surfaces and projectiles. Finally, the numerical energy absorption (by mass and by volume) data of 76 papers are presented across multiple property selection charts, highlighting various materials, manufacturing methods, and topology groups. While there are noticeable differences at certain densities, the graphs show that the categorical differences within those groups have large overlap in terms of energy absorption performance and can be referenced to identify areas for further investigation and to help in the preliminary design process by researchers and industry professionals alike.
Collapse
Affiliation(s)
| | - Mostafa S. A. ElSayed
- Mechanical and Aerospace Engineering, Carleton University, Ottawa, ON K1S 5B6, Canada
| |
Collapse
|
2
|
Ma Y, Guo C, Shen J, Wang Y. Analysis of the topological motifs of the cellular structure of the tri-spine horseshoe crab ( Tachypleus tridentatus) and its associated mechanical properties. BIOINSPIRATION & BIOMIMETICS 2022; 17:066013. [PMID: 36103869 DOI: 10.1088/1748-3190/ac9207] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/22/2022] [Accepted: 09/14/2022] [Indexed: 06/15/2023]
Abstract
Topological motifs in pore architecture can profoundly influence the structural properties of that architecture, such as its mass, porosity, modulus, strength, and surface permeability. Taking the irregular cellular structure of the tri-spine horseshoe crab as a research model, we present a new approach to the quantitative description and analysis of structure-property-function relationships. We employ a robust skeletonization method to construct a curve-skeleton that relies on high-resolution 3D tomographic data. The topological motifs and mechanical properties of the long-range cellular structure were investigated using the Grasshopper plugin and uniaxial compression test to identify the variation gradient. Finite element analysis was conducted for the sub-volumes to obtain the variation in effective modulus along the three principal directions. The results show that the branch length and node distribution density varied from the tip to the base of the sharp corner. These node types formed a low-connectivity network, in which the node types 3-N and 4-N tended to follow the motifs of ideal planar triangle and tetrahedral configurations, respectively, with the highest proportion of inter-branch angles in the angle ranges of 115-120° and 105-110°. In addition, mapping the mechanical gradients to topological properties indicated that narrower profiles with a given branch length gradient, preferred branch orientation, and network connectedness degree are the main factors that affect the mechanical properties. These factors suggest significant potential for designing a controllable, irregularly cellular structure in terms of both morphology and function.
Collapse
Affiliation(s)
- Yaopeng Ma
- College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, People's Republic of China
- Institute of Bio-Inspired Structure and Surface Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, People's Republic of China
| | - Ce Guo
- College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, People's Republic of China
- Institute of Bio-Inspired Structure and Surface Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, People's Republic of China
| | - Jingyu Shen
- College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, People's Republic of China
- Institute of Bio-Inspired Structure and Surface Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, People's Republic of China
| | - Yu Wang
- College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, People's Republic of China
- Institute of Bio-Inspired Structure and Surface Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, People's Republic of China
| |
Collapse
|
3
|
Performance of 3D-Printed Bionic Conch-Like Composite Plate under Low-Velocity Impact. MATERIALS 2022; 15:ma15155201. [PMID: 35955135 PMCID: PMC9369678 DOI: 10.3390/ma15155201] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/28/2022] [Revised: 07/24/2022] [Accepted: 07/25/2022] [Indexed: 01/15/2023]
Abstract
Biological armors can provide an effective protection against predators. In this study, inspired by conch shell, beetle exoskeleton, and nacre, three different types of bionic composites plates were fabricated: Bio-S, Bio-B, and Bio-N, as well as an equivalent monolithic plate formed from the same stiff material designed and manufactured by additive manufacturing, respectively. Low velocity impact tests using drop tower were conducted to study their impact resistance. Experimental findings indicated that the Bio-S composite had superior impact resistance compared with the other bionic composites and the monolithic plate. Furthermore, the influence of the ply angle on the impact resistance of the Bio-S composite plate was investigated. The (0°/30°/0°/30°) arrangement was able to provide the highest impact resistance. Finally, the crack propagation mode in Bio-S composites plates was analyzed, enhancing our understanding of the underlying mechanisms during impact. Such findings may lead to the development of superior lightweight protective structures with improved anti-impact performance.
Collapse
|
4
|
Saufi SASA, Zuhri MYM, Dezaki ML, Sapuan SM, Ilyas RA, As’arry A, Ariffin MKA, Bodaghi M. Compression Behaviour of Bio-Inspired Honeycomb Reinforced Starfish Shape Structures Using 3D Printing Technology. Polymers (Basel) 2021; 13:polym13244388. [PMID: 34960939 PMCID: PMC8707876 DOI: 10.3390/polym13244388] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/24/2021] [Revised: 10/18/2021] [Accepted: 10/19/2021] [Indexed: 11/16/2022] Open
Abstract
The bio-inspired structure (e.g., honeycomb) has been studied for its ability to absorb energy and its high strength. The cell size and wall thickness are the main elements that alter the structural ability to withstand load and pressure. Moreover, adding a secondary structure can increase the compressive strength and energy absorption (EA) capability. In this study, the bio-inspired structures are fabricated by fused deposition modelling (FDM) technology using polylactic acid (PLA) material. Samples are printed in the shape of a honeycomb structure, and a starfish shape is used as its reinforcement. Hence, this study focuses on the compression strength and EA of different cell sizes of 20 and 30 mm with different wall thicknesses ranging from 1.5 to 2.5 mm. Subsequently, the deformation and failure of the structures are determined under the compression loading. It is found that the smaller cell size with smaller wall thickness offered a crush efficiency of 69% as compared to their larger cell size with thicker wall thickness counterparts. It is observed that for a 20 mm cell size, the EA and maximum peak load increase, respectively, when the wall thickness increases. It can be concluded that the compression strength and EA capability increase gradually as the cell size and wall thickness increase.
Collapse
Affiliation(s)
- S. A. S. A. Saufi
- Advanced Engineering Materials and Composites Research Centre, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Malaysia; (S.A.S.A.S.); (S.M.S.)
| | - M. Y. M. Zuhri
- Advanced Engineering Materials and Composites Research Centre, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Malaysia; (S.A.S.A.S.); (S.M.S.)
- Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Product (INTROP), Universiti Putra Malaysia, Serdang 43400, Malaysia
- Correspondence:
| | - M. Lalegani Dezaki
- Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Malaysia; (M.L.D.); (A.A.); (M.K.A.A.)
- Department of Engineering, School of Science and Technology, Nottingham Trent University, Nottingham NG11 8NS, UK;
| | - S. M. Sapuan
- Advanced Engineering Materials and Composites Research Centre, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Malaysia; (S.A.S.A.S.); (S.M.S.)
- Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Product (INTROP), Universiti Putra Malaysia, Serdang 43400, Malaysia
| | - R. A. Ilyas
- School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, UTM, Johor Bahru 81310, Malaysia;
- Centre for Advanced Composite Materials (CACM), Universiti Teknologi Malaysia, UTM, Johor Bahru 81310, Malaysia
| | - A. As’arry
- Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Malaysia; (M.L.D.); (A.A.); (M.K.A.A.)
| | - M. K. A. Ariffin
- Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Malaysia; (M.L.D.); (A.A.); (M.K.A.A.)
| | - M. Bodaghi
- Department of Engineering, School of Science and Technology, Nottingham Trent University, Nottingham NG11 8NS, UK;
| |
Collapse
|