Nonlinear viscoelastic properties of native male human skin and in vitro 3D reconstructed skin models under LAOS stress

Skin substitutes based on gellan gum with mechanical and penetration compatibility to native human skin

The study reports on a simple system to fabricate skin substitutes consisting of a naturally occurring bacterial polysaccharide gellan gum. Gelation was driven by the addition of a culture medium whose cations induced gellan gum crosslinking at physiological temperature, resulting in hydrogels. Human dermal fibroblasts were incorporated in these hydrogels and their mechanical, morphological, and penetration characteristics were studied. The mechanical properties were determined by means of oscillatory shear rheology, and a short linear viscoelastic regime was noted up to less than 1% of strain amplitude. The storage modulus increased with an increasing polymer concentration. The moduli were in the range noted for native human skin. After 2 weeks of fibroblast cultivation, the storage moduli showed signs of deterioration, so that a culture time of 2 weeks was proposed for further studies. Microscopic and fluorescent staining observations were documented. These depicted a crosslinked network structure in the hydrogels with a homogeneous distribution of cells and an assured cell viability of 2 weeks. H&E staining was also performed, which showed some traces of ECM formation in a few sections. Finally, caffeine penetration experiments were carried out with Franz diffusion cells. The hydrogels with a higher concentration of polymer containing cells showed an improved barrier function against caffeine compared to previously studied multicomponent hydrogels as well as commercially available 3D skin models. Therefore, these hydrogels displayed both mechanical and penetration compatibility with the ex vivo native human skin.

Microfluidic jet impact: Spreading, splashing, soft substrate deformation and injection

HYPOTHESIS

Needle-free injections using microfluidic jets could be optimized by reducing splashing and controlling injection depth. However, this is impeded by an incomplete understanding on how jet characteristics influence impact outcome. We hypothesise that exploring the relation between microfluidic jet characteristics and substrate shear modulus on impact behavior will assist in predicting and giving insights on the impact outcome on skin and injection endpoints.

EXPERIMENTS

To do so, a setup using microfluidic chips, at varying laser powers and stand-off distances, was used to create thermocavitation generated microfluidic jets with ranging characteristics (velocity: 7-77 m/s, diameter: 35-120 μm, Weber-number: 40-4000), which were impacted on substrates with different shear modulus.

FINDINGS

Seven impact regimes were found, depending on jet Weber-number and substrate shear modulus, and we identified three thresholds: i) spreading/splashing threshold, ii) dimple formation threshold, and iii) plastic/elastic deformation threshold. The regimes show similarity to skin impact, although the opacity of skin complicated determining the threshold values. Additionally, we found that jet velocity has a higher predictive value for injection depth compared to the Weber-number, and consequently, the jet-diameter. Our findings provide fundamental knowledge on the interaction between microfluidic jets and substrates, and are relevant for optimizing needle-free injections.

Therapeutic Applications of Metal and Metal-Oxide Nanoparticles: Dermato-Cosmetic Perspectives

Invention of novel nanomaterials guaranteeing enhanced biomedical performance in diagnostics and therapeutics, is a perpetual initiative. In this regard, the upsurge and widespread usage of nanoparticles is a ubiquitous phenomenon, focusing predominantly on the application of submicroscopic (< 100 nm) particles. While this is facilitated attributing to their wide range of benefits, a major challenge is to create and maintain a balance, by alleviating the associated toxicity levels. In this minireview, we collate and discuss particularly recent advancements in therapeutic applications of metal and metal oxide nanoparticles in skin and cosmetic applications. On the one hand, we outline the dermatological intrusions, including applications in wound healing. On the other hand, we keep track of the recent trends in the development of cosmeceuticals via nanoparticle engrossments. The dermato-cosmetic applications of metal and metal oxide nanoparticles encompass diverse aspects, including targeted, controlled drug release, and conferring ultraviolet and antimicrobial protections to the skin. Additionally, we deliberate on the critical aspects in comprehending the advantage of rheological assessments, while characterizing the nanoparticulate systems. As an illustration, we single out psoriasis, to capture and comment on the nanodermatology-based curative standpoints. Finally, we lay a broad outlook and examine the imminent prospects.

Polysaccharide-based skin scaffolds with enhanced mechanical compatibility with native human skin

We report a custom-made technique to synthesize process-convenient skin scaffolds by tuning the mechanical properties of hydrogels based on a few naturally occurring polysaccharides to match the rheological properties of previously established benchmarks, i.e., the ex vivo native human skins. We studied the mechanical parameters using oscillatory shear rheology. At small strain amplitudes, the intrinsic elastic modulus showed an almost linear dependence in the middle and a changing rate profile at the two ends with concentration of the principal hydrogel component variant, i.e., kappa (κ)-carrageenan. At large strain amplitudes, the hydrogels demonstrated intercycle strain-softening behavior, the onset of which was directly proportional to the κ-carrageenan concentration. We observed a concentration match for the intrinsic elastic modulus of the benchmark within this sigmoidal curve fit. Contextually, we need to explore other potent polymeric hydrogel systems to achieve mechanical affinity in terms of multiple rheological parameters derived from both strain amplitude and angular frequency sweeps. Additionally, we carried out diffusion experiments to study caffeine permeation attributes. The hydrogels show improved barrier features with increasing κ-carrageenan concentration. In terms of the penetration flux and total cumulative amount of permeated caffeine, this enhanced mechanical adherence demonstrates comparable penetration features with the commercial 3D skin model.

An open source pipeline for design of experiments for hyperelastic models of the skin with applications to keloids

The aim of this work is to characterize the mechanical parameters governing the in-plane behavior of human skin and, in particular, of a keloid-scar. We consider 2D hyperelastic bi-material model of a keloid and the surrounding healthy skin. The problem of finding the optimal model parameters that minimize the misfit between the model observations and the in vivo experimental measurements is solved using our in-house developed inverse solver that is based on the FEniCS finite element computational platform. The paper focuses on the model parameter sensitivity quantification with respect to the experimental measurements, such as the displacement field and reaction force measurements. The developed tools quantify the significance of different measurements on different model parameters and, in turn, give insight into a given model's ability to capture experimental measurements. Finally, an a priori estimate for the model parameter sensitivity is proposed that is independent of the actual measurements and that is defined in the whole computational domain. This estimate is primarily useful for the design of experiments, specifically, in localizing the optimal displacement field measurement sites for the maximum impact on model parameter inference.

A multi-layered model of human skin elucidates mechanisms of wrinkling in the forehead

Skin wrinkling, especially in the facial area, is a prominent sign of aging and is a growing area of research aimed at developing cosmetics and dermatological treatments. To better understand and treat undesirable skin wrinkles, it is vitally important to elucidate the underlying mechanisms of skin wrinkling, a largely mechanical process. Human skin, a multi-layer composite, has six mechanically distinct layers: from the outermost inward they are the stratum corneum, viable epidermis, dermal-epidermal-junction, papillary dermis, reticular dermis, and hypodermis. To better address the through-thickness hierarchy, and the development of wrinkling within this complicated hierarchy, we established a six-layered model of human skin realized with finite element modeling, by leveraging available morphological and biomechanical data on human skin of the forehead. Exercising our new model we aimed to quantify the effects of three potential mechanisms of wrinkle formation: (1) skin compression due to muscle contraction (dynamic wrinkles); (2) age-related volumetric tissue loss (static wrinkles); and (3) the combined effects of both mechanisms. Since hydration of the stratum corneum significantly affects its stiffness we also aimed to quantify the influence its hydration with these three potential mechanisms of wrinkle formation. Our six-layered skin model, combined with the proposed wrinkling mechanisms, successfully predicts the formation of dynamic and static wrinkles in the forehead consistent with the experimental literature. We observed three wrinkling modes in the forehead where the deepest wrinkles could reach to the reticular dermis. With further refinement our new six-layered model of human skin can be applied to study other region-specific wrinkle types such as the "crow's feet" and the nasolabial folds.