1
|
Tamo AK. Nanocellulose-based hydrogels as versatile materials with interesting functional properties for tissue engineering applications. J Mater Chem B 2024. [PMID: 38805188 DOI: 10.1039/d4tb00397g] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/29/2024]
Abstract
Tissue engineering has emerged as a remarkable field aiming to restore or replace damaged tissues through the use of biomimetic constructs. Among the diverse materials investigated for this purpose, nanocellulose-based hydrogels have garnered attention due to their intriguing biocompatibility, tunable mechanical properties, and sustainability. Over the past few years, numerous research works have been published focusing on the successful use of nanocellulose-based hydrogels as artificial extracellular matrices for regenerating various types of tissues. The review emphasizes the importance of tissue engineering, highlighting hydrogels as biomimetic scaffolds, and specifically focuses on the role of nanocellulose in composites that mimic the structures, properties, and functions of the native extracellular matrix for regenerating damaged tissues. It also summarizes the types of nanocellulose, as well as their structural, mechanical, and biological properties, and their contributions to enhancing the properties and characteristics of functional hydrogels for tissue engineering of skin, bone, cartilage, heart, nerves and blood vessels. Additionally, recent advancements in the application of nanocellulose-based hydrogels for tissue engineering have been evaluated and documented. The review also addresses the challenges encountered in their fabrication while exploring the potential future prospects of these hydrogel matrices for biomedical applications.
Collapse
Affiliation(s)
- Arnaud Kamdem Tamo
- Institute of Microsystems Engineering IMTEK, University of Freiburg, 79110 Freiburg, Germany.
- Freiburg Center for Interactive Materials and Bioinspired Technologies FIT, University of Freiburg, 79110 Freiburg, Germany
- Freiburg Materials Research Center FMF, University of Freiburg, 79104 Freiburg, Germany
- Ingénierie des Matériaux Polymères (IMP), Université Claude Bernard Lyon 1, INSA de Lyon, Université Jean Monnet, CNRS, UMR 5223, 69622 Villeurbanne CEDEX, France
| |
Collapse
|
2
|
Boobphahom S, Rodthongkum N. Graphene oxide-alginate hydrogel-based indicator displacement assay integrated with diaper for non-invasive Alzheimer's disease screening. Int J Biol Macromol 2023; 253:126316. [PMID: 37633552 DOI: 10.1016/j.ijbiomac.2023.126316] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/24/2023] [Revised: 08/09/2023] [Accepted: 08/11/2023] [Indexed: 08/28/2023]
Abstract
Pyrocatechol violet/copper ion-graphene oxide/alginate (PV/Cu2+-GO/Alg) hydrogel was fabricated and applied as a colorimetric sensor for monitoring urinary cysteine via an indicator-displacement assay (IDA) and Cu2+-cysteine affinity pair. The hydrogel-based sensor was formed by Ca2+ cations cross-linked PV/Cu2+-GO/Alg. The morphologies of hydrogel were characterized by field-emission scanning electron microscopy with energy-dispersive X-ray spectroscopy and Fourier-transform Raman spectroscopy. Incorporating GO into the hydrogel improved its uniformity of porosity, large surface area, and compressive strength, leading to amplified colorimetric signals of the hydrogel sensor. Under optimal conditions, this sensor offered a linear range of 0.0-0.5 g/L with a detection limit of 0.05 g/L for cysteine without interfering effects in urine. Furthermore, this hydrogel-based sensor was applied for urinary cysteine detection and validated with laser desorption ionization mass spectrometry. This platform could be used to determine cysteine at its cutoff (0.25 g/L) in human urine, which was distinguishable between normal and abnormal individuals, to evaluate an early stage of Alzheimer's disease. Eventually, this system was integrated with diapers for a wearable cysteine sensor.
Collapse
Affiliation(s)
- Siraprapa Boobphahom
- Metallurgy and Materials Science Research Institute, Chulalongkorn University, Soi Chula 12, Phayathai Road, Patumwan, Bangkok 10330, Thailand; Research Center for Neuroscience, Institute of Molecular Biosciences, Mahidol University, Nakhon Pathom 73170, Thailand
| | - Nadnudda Rodthongkum
- Metallurgy and Materials Science Research Institute, Chulalongkorn University, Soi Chula 12, Phayathai Road, Patumwan, Bangkok 10330, Thailand; Center of Excellence in Responsive Wearable Materials, Chulalongkorn University, Bangkok 10330, Thailand.
| |
Collapse
|
3
|
Prosvirnina AP, Bugrov AN, Bobrova NV, Sivtsov EV, Nikolaeva AL, Kamalov AM, Sokolova MP, Smirnov MA. Three-Dimensional Printed Shape Memory Gels Based on a Structured Disperse System with Hydrophobic Cellulose Nanofibers. Polymers (Basel) 2023; 15:3547. [PMID: 37688173 PMCID: PMC10490119 DOI: 10.3390/polym15173547] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/27/2023] [Revised: 08/18/2023] [Accepted: 08/23/2023] [Indexed: 09/10/2023] Open
Abstract
Inks for 3D printing were prepared by dispersing bacterial cellulose nanofibers (CNF) functionalized with methacrylate groups in a polymerizable deep eutectic solvent (DES) based on choline chloride and acrylic acid with water as a cosolvent. After 3D printing and UV-curing, the double-network composite gel consisting of chemically and physically crosslinked structures composed from sub-networks of modified CNF and polymerized DES, respectively, was formed. The rheological properties of inks, as well as mechanical and shape memory properties of the 3D-printed gels, were investigated in dynamic and static modes. It was shown that the optimal amount of water allows improvement of the mechanical properties of the composite gel due to the formation of closer contacts between the modified CNF. The addition of 12 wt% water results in an increase in strength and ultimate elongation to 11.9 MPa and 300%, respectively, in comparison with 5.5 MPa and 100% for an anhydrous system. At the same time, the best shape memory properties were found for an anhydrous system: shape fixation and recovery coefficients were 80.0 and 95.8%, respectively.
Collapse
Affiliation(s)
- Angelina P. Prosvirnina
- Institute of Macromolecular Compounds, Russian Academy of Sciences, Bolshoy Pr. 31, Saint Petersburg 199004, Russia
| | - Alexander N. Bugrov
- Institute of Macromolecular Compounds, Russian Academy of Sciences, Bolshoy Pr. 31, Saint Petersburg 199004, Russia
- Department of Physical Chemistry, Saint Petersburg Electrotechnical University (ETU “LETI”), ul. Professora Popova 5, Saint Petersburg 197022, Russia
| | - Natalya V. Bobrova
- Institute of Macromolecular Compounds, Russian Academy of Sciences, Bolshoy Pr. 31, Saint Petersburg 199004, Russia
| | - Eugene V. Sivtsov
- Institute of Macromolecular Compounds, Russian Academy of Sciences, Bolshoy Pr. 31, Saint Petersburg 199004, Russia
- Saint Petersburg State Institute of Technology, Moskovsky Pr. 24-26/49, Saint Petersburg 190013, Russia
| | - Alexandra L. Nikolaeva
- Institute of Macromolecular Compounds, Russian Academy of Sciences, Bolshoy Pr. 31, Saint Petersburg 199004, Russia
| | - Almaz M. Kamalov
- Institute of Macromolecular Compounds, Russian Academy of Sciences, Bolshoy Pr. 31, Saint Petersburg 199004, Russia
| | - Maria P. Sokolova
- Institute of Macromolecular Compounds, Russian Academy of Sciences, Bolshoy Pr. 31, Saint Petersburg 199004, Russia
| | - Michael A. Smirnov
- Institute of Macromolecular Compounds, Russian Academy of Sciences, Bolshoy Pr. 31, Saint Petersburg 199004, Russia
| |
Collapse
|
4
|
Liu Y, Xia X, Liu Z, Dong M. The Next Frontier of 3D Bioprinting: Bioactive Materials Functionalized by Bacteria. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2205949. [PMID: 36549677 DOI: 10.1002/smll.202205949] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/28/2022] [Revised: 11/21/2022] [Indexed: 06/17/2023]
Abstract
3D bioprinting has become a flexible technical means used in many fields. Currently, research on 3D bioprinting is mainly focused on the use of mammalian cells to print organ and tissue models, which has greatly promoted progress in the fields of tissue engineering, regenerative medicine, and pharmaceuticals. In recent years, bacterial bioprinting has gradually become a rapidly developing research fields, with a wide range of potential applications in basic research, biomedicine, bioremediation, and other field. Here, this works reviews new research on bacterial bioprinting, and discuss its future research direction.
Collapse
Affiliation(s)
- Yifei Liu
- College of Food Science and Technology, Nanjing Agricultural University, Nanjing, 210095, P. R. China
| | - Xiudong Xia
- Institute of Agricultural Product Processing, Jiangsu Academy of Agricultural Sciences, Nanjing, 210014, P. R. China
| | - Zhen Liu
- College of Food Science and Technology, Nanjing Agricultural University, Nanjing, 210095, P. R. China
| | - Mingsheng Dong
- College of Food Science and Technology, Nanjing Agricultural University, Nanjing, 210095, P. R. China
| |
Collapse
|
5
|
γ-Irradiation crosslinking of graphene oxide/cellulose nanofiber/poly (acrylic acid) hydrogel as a urea sensing patch. Int J Biol Macromol 2022; 213:1037-1046. [PMID: 35714553 DOI: 10.1016/j.ijbiomac.2022.06.053] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/02/2022] [Revised: 05/27/2022] [Accepted: 06/09/2022] [Indexed: 11/19/2022]
Abstract
Poly (acrylic acid) (PAA) nanocomposite hydrogel was fabricated as a sensing patch for non-invasive dual detection of urea in sweat. The hydrogel was prepared by γ-irradiation crosslinking of PAA solution incorporated with graphene oxide (GO) and cellulose nanofiber (CNF). With high water-sorption capacity and transparency, the hydrogel was suitable to accommodate coloring reagents and enzymes for colorimetric sensing of urea in sweat. The colorimetric sensor exhibited vivid color change towards the increase of urea concentration in a linear range of 40-80 mM covering a cut-off value (60 mM) for chronic kidney disease (CKD) indication. Furthermore, the hydrogel could be directly applied as a substrate for direct quantitation of urea in sweat by laser desorption ionization mass spectroscopy (LDI-MS). While CNF improved the mechanical properties of the hydrogel, GO played a key role in enhancing laser desorption ionization of urea in LDI-MS and increased the hydrogel functionalities. LDI-MS verified that GO/CNF/PAA hydrogel could act as a direct matrix for promoting urea ionization and these results corresponded well with the colorimetric sensor. Hence, this hydrogel patch might be a potential material to be applied in non-invasive and dual-detection of CKD in medical diagnosis.
Collapse
|
6
|
Schiavi A, Cuccaro R, Troia A. Functional mechanical attributes of natural and synthetic gel-based scaffolds in tissue engineering: strain-stiffening effects on apparent elastic modulus and compressive toughness. J Mech Behav Biomed Mater 2022; 126:105066. [PMID: 35008012 DOI: 10.1016/j.jmbbm.2021.105066] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/27/2021] [Revised: 12/14/2021] [Accepted: 12/24/2021] [Indexed: 12/18/2022]
Abstract
The accurate identification and determination of elastic modulus and toughness, as well as other functional mechanical attributes of artificial tissues, are of paramount importance in several fields of tissue science, tissue engineering and technology, since biomechanical and biophysical behavior is strongly linked to biological features of the medical implants and tissue-engineering scaffolds. When soft or ultra-soft materials are investigated, a relevant dispersion of elastic modulus values can be achieved, due to the strain-stiffening effects, inducing a typical non-linear behavior of these materials, as a function of strain-range. In this short communication, the Apparent elastic modulus strain-range dependence is estimated from a segmentation of the strain stiffening curve, and the related compressive toughness is investigated and discussed, based on experimental evidence, for 6 different kinds of gels, used for artificial tissue fabrication; experimental results are compared to mechanical properties of native human tissues.
Collapse
Affiliation(s)
- Alessandro Schiavi
- INRiM - Istituto Nazionale di Ricerca Metrologica, Strada Delle Cacce 91, 10135, Torino, Italy.
| | - Rugiada Cuccaro
- INRiM - Istituto Nazionale di Ricerca Metrologica, Strada Delle Cacce 91, 10135, Torino, Italy.
| | - Adriano Troia
- INRiM - Istituto Nazionale di Ricerca Metrologica, Strada Delle Cacce 91, 10135, Torino, Italy.
| |
Collapse
|
7
|
Smirnov MA, Fedotova VS, Sokolova MP, Nikolaeva AL, Elokhovsky VY, Karttunen M. Polymerizable Choline- and Imidazolium-Based Ionic Liquids Reinforced with Bacterial Cellulose for 3D-Printing. Polymers (Basel) 2021; 13:3044. [PMID: 34577946 PMCID: PMC8471885 DOI: 10.3390/polym13183044] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/10/2021] [Revised: 09/04/2021] [Accepted: 09/06/2021] [Indexed: 11/23/2022] Open
Abstract
In this work, a novel approach is demonstrated for 3D-printing of bacterial cellulose (BC) reinforced UV-curable ion gels using two-component solvents based on 1-butyl-3-methylimidazolium chloride or choline chloride combined with acrylic acid. Preservation of cellulose's crystalline and nanofibrous structure is demonstrated using wide-angle X-ray diffraction (WAXD) and atomic force microscopy (AFM). Rheological measurements reveal that cholinium-based systems, in comparison with imidazolium-based ones, are characterised with lower viscosity at low shear rates and improved stability against phase separation at high shear rates. Grafting of poly(acrylic acid) onto the surfaces of cellulose nanofibers during UV-induced polymerization of acrylic acid results in higher elongation at break for choline chloride-based compositions: 175% in comparison with 94% for imidazolium-based systems as well as enhanced mechanical properties in compression mode. As a result, cholinium-based BC ion gels containing acrylic acid can be considered as more suitable for 3D-printing of objects with improved mechanical properties due to increased dispersion stability and filler/matrix interaction.
Collapse
Affiliation(s)
- Michael A. Smirnov
- Institute of Macromolecular Compounds, Russian Academy of Sciences, V.O. Bolshoi pr. 31, 199004 St. Petersburg, Russia; (V.S.F.); (M.P.S.); (A.L.N.); (V.Y.E.)
- Institute of Chemistry, Saint Petersburg State University, Universitetsky pr. 26, Peterhof, 198504 St. Petersburg, Russia
| | - Veronika S. Fedotova
- Institute of Macromolecular Compounds, Russian Academy of Sciences, V.O. Bolshoi pr. 31, 199004 St. Petersburg, Russia; (V.S.F.); (M.P.S.); (A.L.N.); (V.Y.E.)
- Institute of Chemistry, Saint Petersburg State University, Universitetsky pr. 26, Peterhof, 198504 St. Petersburg, Russia
| | - Maria P. Sokolova
- Institute of Macromolecular Compounds, Russian Academy of Sciences, V.O. Bolshoi pr. 31, 199004 St. Petersburg, Russia; (V.S.F.); (M.P.S.); (A.L.N.); (V.Y.E.)
| | - Alexandra L. Nikolaeva
- Institute of Macromolecular Compounds, Russian Academy of Sciences, V.O. Bolshoi pr. 31, 199004 St. Petersburg, Russia; (V.S.F.); (M.P.S.); (A.L.N.); (V.Y.E.)
| | - Vladimir Yu. Elokhovsky
- Institute of Macromolecular Compounds, Russian Academy of Sciences, V.O. Bolshoi pr. 31, 199004 St. Petersburg, Russia; (V.S.F.); (M.P.S.); (A.L.N.); (V.Y.E.)
| | - Mikko Karttunen
- Institute of Macromolecular Compounds, Russian Academy of Sciences, V.O. Bolshoi pr. 31, 199004 St. Petersburg, Russia; (V.S.F.); (M.P.S.); (A.L.N.); (V.Y.E.)
- Department of Chemistry, The University of Western Ontario, 1151 Richmond Street, London, ON N6A 5B7, Canada
- Department of Physics and Astronomy, The University of Western Ontario, 1151 Richmond Street, London, ON N6A 5B7, Canada
- The Centre of Advanced Materials and Biomaterials Research, The University of Western Ontario, 1151 Richmond Street, London, ON N6A 5B7, Canada
| |
Collapse
|
8
|
Boztepe C, Daskin M, Erdogan A, Sarici T. Preparation of poly(acrylamide‐co‐2‐acrylamido‐2‐methylpropan sulfonic acid)‐g‐Carboxymethyl cellulose/Titanium dioxide hydrogels and modeling of their swelling capacity and mechanic strength behaviors by response surface method technique. POLYM ENG SCI 2021; 61:2083-2096. [DOI: 10.1002/pen.25736] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/15/2021] [Accepted: 05/31/2021] [Indexed: 09/01/2023]
Abstract
AbstractIt is very important that new generation, unique, high mechanical strength, and biocompatible hydrogel composites are developed due to their potential to be used as biomaterials in the biomedical field. Modeling of the swelling capacity and mechanical strength behavior of hydrogels is a domain of steadily increasing academic and industrial importance. These behaviors are difficult to model accurately due to hydrogels show very complex behavior depending on the content. In this study, a series of poly(acrylamide‐co‐2‐acrylamido‐2‐methylpropan sulfonic acid)‐g‐carboxymethyl cellulose/TiO2 (poly(AAm‐co‐AMPS)‐g‐CMC/TiO2) superabsorbent hydrogel composites were prepared by free‐radical graft copolymerization in aqueous solution. Structural and surface morphology characterizations were conducted by using Fourier‐transform infrared spectroscopy and scanning electron microscope analysis techniques. For modeling the equilibrium swelling capacity and fracture strength behaviors of hydrogels, the composition parameters (such as mole ratio of AMPS/AAm, wt% of CMC, and wt% of TiO2) was proposed by response surface method (RSM) Design Expert‐10 software. Statistical parameters showed that the RSM model has good performance in modeling the swelling capacity and mechanic fracture strength behaviors of poly(AAm‐co‐AMPS)‐g‐CMC/TiO2 hydrogel composites. According to the RSM model results, the maximum swelling capacity and fracture strength values were calculated as 270.39 g water/g polymer and 159.23 kPa, respectively.
Collapse
Affiliation(s)
- Cihangir Boztepe
- Department of Biomedical Engineering, Faculty of Engineering Inonu University Malatya Turkey
| | - Mahmut Daskin
- Department of Mechanical Engineering, Faculty of Engineering Inonu University Malatya Turkey
| | - Ahmet Erdogan
- Department of Mechanical Engineering, Faculty of Engineering Inonu University Malatya Turkey
| | - Talha Sarici
- Department of Civil Engineering, Faculty of Engineering Inonu University Malatya Turkey
| |
Collapse
|
9
|
Tolmachev D, Mamistvalov G, Lukasheva N, Larin S, Karttunen M. Effects of Amino Acid Side-Chain Length and Chemical Structure on Anionic Polyglutamic and Polyaspartic Acid Cellulose-Based Polyelectrolyte Brushes. Polymers (Basel) 2021; 13:polym13111789. [PMID: 34071693 PMCID: PMC8199235 DOI: 10.3390/polym13111789] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/09/2021] [Revised: 05/25/2021] [Accepted: 05/25/2021] [Indexed: 11/25/2022] Open
Abstract
We used atomistic molecular dynamics (MD) simulations to study polyelectrolyte brushes based on anionic α,L-glutamic acid and α,L-aspartic acid grafted on cellulose in the presence of divalent CaCl2 salt at different concentrations. The motivation is to search for ways to control properties such as sorption capacity and the structural response of the brush to multivalent salts. For this detailed understanding of the role of side-chain length, the chemical structure and their interplay are required. It was found that in the case of glutamic acid oligomers, the longer side chains facilitate attractive interactions with the cellulose surface, which forces the grafted chains to lie down on the surface. The additional methylene group in the side chain enables side-chain rotation, enhancing this effect. On the other hand, the shorter and more restricted side chains of aspartic acid oligomers prevent attractive interactions to a large degree and push the grafted chains away from the surface. The difference in side-chain length also leads to differences in other properties of the brush in divalent salt solutions. At a low grafting density, the longer side chains of glutamic acid allow the adsorbed cations to be spatially distributed inside the brush resulting in a charge inversion. With an increase in grafting density, the difference in the total charge of the aspartic and glutamine brushes disappears, but new structural features appear. The longer sides allow for ion bridging between the grafted chains and the cellulose surface without a significant change in main-chain conformation. This leads to the brush structure being less sensitive to changes in salt concentration.
Collapse
Affiliation(s)
- Dmitry Tolmachev
- Institute of Macromolecular Compounds, Russian Academy of Sciences, Bolshoy pr. 31, 199004 Petersburg, Russia; (N.L.); (S.L.)
- Correspondence: (D.T.); (M.K.)
| | - George Mamistvalov
- Faculty of Physics, St. Petersburg State University, Petrodvorets, 198504 Petersburg, Russia;
| | - Natalia Lukasheva
- Institute of Macromolecular Compounds, Russian Academy of Sciences, Bolshoy pr. 31, 199004 Petersburg, Russia; (N.L.); (S.L.)
| | - Sergey Larin
- Institute of Macromolecular Compounds, Russian Academy of Sciences, Bolshoy pr. 31, 199004 Petersburg, Russia; (N.L.); (S.L.)
- Faculty of Physics, St. Petersburg State University, Petrodvorets, 198504 Petersburg, Russia;
| | - Mikko Karttunen
- Institute of Macromolecular Compounds, Russian Academy of Sciences, Bolshoy pr. 31, 199004 Petersburg, Russia; (N.L.); (S.L.)
- Department of Chemistry, The University of Western Ontario, 1151 Richmond Street, London, ON N6A 5B7, Canada
- Department of Applied Mathematics, The University of Western Ontario, 1151 Richmond Street, London, ON N6A 5B7, Canada
- The Centre of Advanced Materials and Biomaterials Research, The University of Western Ontario, 1151 Richmond Street, London, ON N6A 5B7, Canada
- Correspondence: (D.T.); (M.K.)
| |
Collapse
|
10
|
DLP 3D Printing Meets Lignocellulosic Biopolymers: Carboxymethyl Cellulose Inks for 3D Biocompatible Hydrogels. Polymers (Basel) 2020; 12:polym12081655. [PMID: 32722423 PMCID: PMC7465788 DOI: 10.3390/polym12081655] [Citation(s) in RCA: 34] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/26/2020] [Revised: 07/21/2020] [Accepted: 07/21/2020] [Indexed: 02/07/2023] Open
Abstract
The development of new bio-based inks is a stringent request for the expansion of additive manufacturing towards the development of 3D-printed biocompatible hydrogels. Herein, methacrylated carboxymethyl cellulose (M-CMC) is investigated as a bio-based photocurable ink for digital light processing (DLP) 3D printing. CMC is chemically modified using methacrylic anhydride. Successful methacrylation is confirmed by 1H NMR and FTIR spectroscopy. Aqueous formulations based on M-CMC/lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) photoinitiator and M-CMC/Dulbecco’s Modified Eagle Medium (DMEM)/LAP show high photoreactivity upon UV irradiation as confirmed by photorheology and FTIR. The same formulations can be easily 3D-printed through a DLP apparatus to produce 3D shaped hydrogels with excellent swelling ability and mechanical properties. Envisaging the application of the hydrogels in the biomedical field, cytotoxicity is also evaluated. The light-induced printing of cellulose-based hydrogels represents a significant step forward in the production of new DLP inks suitable for biomedical applications.
Collapse
|