A quantitative method to determine osteogenic differentiation aptness of scaffold

Honeycomb-like biomimetic scaffold by functionalized antibacterial hydrogel and biodegradable porous Mg alloy for osteochondral regeneration

Introduction: Osteochondral repair poses a significant challenge due to its unique pathological mechanisms and complex repair processes, particularly in bacterial tissue conditions resulting from open injuries, infections, and surgical contamination. This study introduces a biomimetic honeycomb-like scaffold (Zn-AlgMA@Mg) designed for osteochondral repair. The scaffold consists of a dicalcium phosphate dihydrate (DCPD)-coated porous magnesium scaffold (DCPD Mg) embedded within a dual crosslinked sodium alginate hydrogel (Zn-AlgMA). This combination aims to synergistically exert antibacterial and osteochondral integrated repair properties. Methods: The Zn-AlgMA@Mg scaffold was fabricated by coating porous magnesium scaffolds with DCPD and embedding them within a dual crosslinked sodium alginate hydrogel. The structural and mechanical properties of the DCPD Mg scaffold were characterized using scanning electron microscopy (SEM) and mechanical testing. The microstructural features and hydrophilicity of Zn-AlgMA were assessed. In vitro studies were conducted to evaluate the controlled release of magnesium and zinc ions, as well as the scaffold's osteogenic, chondrogenic, and antibacterial properties. Proteomic analysis was performed to elucidate the mechanism of osteochondral integrated repair. In vivo efficacy was evaluated using a rabbit full-thickness osteochondral defect model, with micro-CT evaluation, quantitative analysis, and histological staining (hematoxylin-eosin, Safranin-O, and Masson's trichrome). Results: The DCPD Mg scaffold exhibited a uniform porous structure and superior mechanical properties. The Zn-AlgMA hydrogel displayed consistent microstructural features and enhanced hydrophilicity. The Zn-AlgMA@Mg scaffold provided controlled release of magnesium and zinc ions, promoting cell proliferation and vitality. In vitro studies demonstrated significant osteogenic and chondrogenic properties, as well as antibacterial efficacy. Proteomic analysis revealed the underlying mechanism of osteochondral integrated repair facilitated by the scaffold. Micro-CT evaluation and histological analysis confirmed successful osteochondral integration in the rabbit model. Discussion: The biomimetic honeycomb-like scaffold (Zn-AlgMA@Mg) demonstrated promising results for osteochondral repair, effectively addressing the challenges posed by bacterial tissue conditions. The scaffold's ability to release magnesium and zinc ions in a controlled manner contributed to its significant osteogenic, chondrogenic, and antibacterial properties. Proteomic analysis provided insights into the scaffold's mechanism of action, supporting its potential for integrated osteochondral regeneration. The successful in vivo results highlight the scaffold's efficacy, making it a promising biomaterial for future applications in osteochondral repair.

Performance of a multiphase bioactive socket plug with a barrier function for alveolar ridge preservation

The natural healing process of extraction socket and traditional socket plug material could not prevent buccal bone wall resorption and down growth of epithelium from the socket orifice. A multiphase bioactive socket plug (BP) is designed to overcome the natural healing process by maintaining the three-dimensional (3D) volume of extraction sockets, particularly in sockets with wall defects, and later provide sufficient alveolar bone volume for implant placement. The study aimed to fabricate and evaluate the physical, chemical, and biological performance of BPin vitro. The BP was fabricated through freeze-drying and layer-by-layer assembly, comprised of a base serving as a scaffold, a central portion for promoting bone regeneration, an upper buccal portion for maintaining alveolar socket dimension with a covering collagen membrane (Memb) on the top and upper buccal surface to prevent soft tissue infiltration. The BP as the experimental group and a pure collagen plug (CP) as the control group were investigated and compared. Radiograph, scanning electron microscopy, and energy-dispersive spectroscopy mapping confirmed that the four-part BP was successfully assembled and fabricated. Swelling rate analysis indicated that BP, CP, and Memb reached swelling equilibrium within 1 hour. BP exhibited a high remaining weight percentage in collagenase solution (68.81 ± 2.21% on day 90) and sustained calcium ion release, reaching the maximum 0.13 ± 0.04 mmol l-1on day 14. In biological assays, BP exhibited excellent cell proliferation (The OD value increased from 0.02 on day 1 to 0.23 on day 21.). The BP group exhibited higher alkaline phosphatase activity and osteocalcin content than the CP group within 21 days. Memb and BP exhibited outstanding barrier function, as evidenced by Hematoxylin and eosin staining. In summary, the multiphase bioactive socket plug represents a promising scaffold for alveolar ridge preservation application.

Effects of the MCF-7 Exhausted Medium on hADSC Behaviour

Stem cells possess the ability to differentiate into different lineages and the ability to self-renew, thus representing an excellent tool for regenerative medicine. They can be isolated from different tissues, including the adipose tissue. Adipose tissue and human adipose-derived stem cells (hADSCs) are privileged candidates for regenerative medicine procedures or other plastic reconstructive surgeries. The cellular environment is able to influence the fate of stem cells residing in the tissue. In a previous study, we exposed hADSCs to an exhausted medium of a breast cancer cell line (MCF-7) recovered at different days (4, 7, and 10 days). In the same paper, we inferred that the medium was able to influence the behaviour of stem cells. Considering these results, in the present study, we evaluated the expression of the major genes related to adipogenic and osteogenic differentiation. To confirm the gene expression data, oil red and alizarin red colorimetric assays were performed. Lastly, we evaluated the expression of miRNAs influencing the differentiation process and the proliferation rate, maintaining a proliferative state. The data obtained confirmed that cells exposed to the medium maintained a stem and proliferative state that could lead to a risky proliferative phenotype.

Novel Organic-Inorganic Nanocomposite Hybrids Based on Bioactive Glass Nanoparticles and Their Enhanced Osteoinductive Properties

Inorganic-organic hybrid biomaterials have been proposed for bone tissue repair, with improved mechanical flexibility compared with scaffolds fabricated from bioceramics. However, obtaining hybrids with osteoinductive properties equivalent to those of bioceramics is still a challenge. In this work, we present for the first time the synthesis of a class II hybrid modified with bioactive glass nanoparticles (nBGs) with osteoinductive properties. The nanocomposite hybrids were produced by incorporating nBGs in situ into a polytetrahydrofuran (PTHF) and silica (SiO2) hybrid synthesis mixture using a combined sol-gel and cationic polymerization method. nBGs ~80 nm in size were synthesized using the sol-gel technique. The structure, composition, morphology, and mechanical properties of the resulting materials were characterized using ATR-FTIR, 29Si MAS NMR, SEM-EDX, AFM, TGA, DSC, mechanical, and DMA testing. The in vitro bioactivity and degradability of the hybrids were assessed in simulated body fluid (SBF) and PBS, respectively. Cytocompatibility with mesenchymal stem cells was assessed using MTS and cell adhesion assays. Osteogenic differentiation was determined using the alkaline phosphatase activity (ALP), as well as the gene expression of Runx2 and Osterix markers. Hybrids loaded with 5, 10, and 15% of nBGs retained the mechanical flexibility of the PTHF-SiO2 matrix and improved its ability to promote the formation of bone-like apatite in SBF. The nBGs did not impair cell viability, increased the ALP activity, and upregulated the expression of Runx2 and Osterix. These results demonstrate that nBGs are an effective osteoinductive nanoadditive for the production of class II hybrid materials with enhanced properties for bone tissue regeneration.

Osteogenic differentiation of human mesenchymal stem cells on electroactive substrates

This study investigates the effect of electroactivity and electrical charge distribution on the biological response of human bone marrow stem cells (hBMSCs) cultured in monolayer on flat poly(vinylidene fluoride), PVDF, substrates. Differences in cell behaviour, including proliferation, expression of multipotency markers CD90, CD105 and CD73, and expression of genes characteristic of different mesenchymal lineages, were observed both during expansion in basal medium before reaching confluence and in confluent cultures in osteogenic induction medium. The crystallisation of PVDF in the electrically neutral α-phase or in the electroactive phase β, both unpoled and poled, has been found to have an important influence on the biological response. In addition, the presence of a permanent positive or negative surface electrical charge distribution in phase β substrates has also shown a significant effect on cell behaviour.

Conducting biointerface of spider-net-like chitosan-adorned polyurethane/SPIONs@SrO2-fMWCNTs for bone tissue engineering and antibacterial efficacy

In pursuit of enhancing bone cell proliferation, this study delves into the fabrication of porous scaffolds through the integration of nanomaterials. Specifically, we present the development of highly conductive chitosan (CS) nanonets on fibro-porous polyurethane (PU) bio-membranes. These nanofibers comprise functionalized multiwall carbon nanotubes (fMWCNTs), well-dispersed superparamagnetic iron oxide (SPIONs), and strontium oxide (SrO2) nanoparticles. The resulting porous scaffold exhibits remarkable interfacial biocompatibility, antibacterial properties, and load-bearing capability. Through meticulous in vitro investigations, the CS-PU/SPIONs/SrO2-fMWCNTs nanofibrous scaffolds have demonstrated a propensity to promote bone cell regeneration. Notably, the integration of these nanomaterials has been found to upregulate crucial bone-related markers, including ALP, ARS, COL-I, RUNX2, and SPP-I. The evaluation of these markers, conducted through quantitative real-time polymerase chain reaction (qRT-PCR) and immunocytochemistry, substantiates the improved cell survival and enhanced osteogenic differentiation facilitated by the integrated nanomaterials. This comprehensive analysis underscores the efficacy of CS-PU/SPIONs/SrO2-fMWCNTs bioscaffolds in promoting MC3T3-E1 cell regeneration within, thereby holding promise for advancements in bone tissue engineering and regenerative medicine.

Trends in bioactivity: inducing and detecting mineralization of regenerative polymeric scaffolds

Due to limitations of biological and alloplastic grafts, regenerative engineering has emerged as a promising alternative to treat bone defects. Bioactive polymeric scaffolds are an integral part of such an approach. Bioactivity importantly induces hydroxyapatite mineralization that promotes osteoinductivity and osseointegration with surrounding bone tissue. Strategies to confer bioactivity to polymeric scaffolds utilize bioceramic fillers, coatings and surface treatments, and additives. These approaches can also favorably impact mechanical and degradation properties. A variety of fabrication methods are utilized to prepare scaffolds with requisite morphological features. The bioactivity of scaffolds may be evaluated with a broad set of techniques, including in vitro (acellular and cellular) and in vivo methods. Herein, we highlight contemporary and emerging approaches to prepare and assess scaffold bioactivity, as well as existing challenges.

The Role of Osteogenic Effect and Vascular Function in Bone Health in Hypertensive Rats: A Study of Anti-hypertensive and Hemorheologic Drugs

Vascular dysfunction contributes to the development of osteopenia in hypertensive patients, as decreased blood supply to bones results in tissue damage and dysfunction. The effect of anti-hypertensive medicines on bone mass in hypertensive individuals is inconclusive because of the varied mechanism of their action, and suggests that reducing blood pressure (BP) alone is insufficient to enhance bone mass in hypertension. Pentoxifylline (PTX), a hemorheological drug, improves blood flow by reducing blood viscosity and angiogenesis, also has an osteogenic effect. We hypothesized that improving vascular function is critical to increasing bone mass in hypertension. To test this, we screened various anti-hypertensive drugs for their in vitro osteogenic effect, from which timolol and hydralazine were selected. In adult female spontaneously hypertensive rats (SHRs), timolol and hydralazine did not improve vascular function and bone mass, but PTX improved both. In female SHR animals, PTX restored bone mass, strength and mineralization, up to the level of normotensive control rats. In addition, we observed lower blood vasculature in the femur of adult SHR animals, and PTX restored them. PTX also restored the bone vascular and angiogenesis parameters that had been impaired in OVX SHR compared to sham SHR. This study demonstrates the importance of vascular function in addition to increased bone mass for improving bone health as achieved by PTX without affecting BP, and suggests a promising treatment option for osteoporosis in hypertensive patients, particularly at-risk postmenopausal women.

Effect of high cyclic hydrostatic pressure on osteogenesis of mesenchymal stem cells cultured in liquefied micro-compartments

Bone resident cells are constantly subjected to a range of distinct mechanical loadings, which generates a complex microenvironment. In particular, hydrostatic pressure (HP) has a key impact on modulation of cell function and fate determination. Although HP is a constant mechanical stimulus, its role in regulating the osteogenesis process within a defined 3D microenvironment has not been comprehensively elucidated. Perceiving how environmental factors regulate the differentiation of stem cells is essential for expanding their regenerative potential. Inspired by the mechanical environment of bone, this study attempted to investigate the influence of different ranges of cyclic HP on human adipose-derived mesenchymal stem cells (MSCs) encapsulated within a compartmentalized liquefied microenvironment. Taking advantage of the liquefied environment of microcapsules, MSCs were exposed to cyclic HP of 5 or 50 MPa, 3 times/week at 37 °C. Biological tests using fluorescence staining of F-actin filaments showed a noticeable improvement in cell-cell interactions and cellular network formation of MSCs. These observations were more pronounced in osteogenic (OST) condition, as confirmed by fluorescent staining of vinculin. More interestingly, there was a significant increase in alkaline phosphatase activity of MSCs exposed to 50 MPa magnitude of HP, even in the absence of osteoinductive factors. In addition, a greater staining area of both osteopontin and hydroxyapatite was detected in the 50 MPa/OST group. These findings highlight the benefit of hydrostatic pressure to regulate osteogenesis of MSCs as well as the importance of employing simultaneous biochemical and mechanical stimulation to accelerate the osteogenic potential of MSCs for biomedical purposes.

β-TCP from 3D-printed composite scaffolds acts as an effective phosphate source during osteogenic differentiation of human mesenchymal stromal cells

Introduction: Human bone marrow-derived mesenchymal stromal cells (hBM-MSCs) are often combined with calcium phosphate (CaP)-based 3D-printed scaffolds with the goal of creating a bone substitute that can repair segmental bone defects. In vitro, the induction of osteogenic differentiation traditionally requires, among other supplements, the addition of β-glycerophosphate (BGP), which acts as a phosphate source. The aim of this study is to investigate whether phosphate contained within the 3D-printed scaffolds can effectively be used as a phosphate source during hBM-MSC in vitro osteogenesis. Methods: hBM-MSCs are cultured on 3D-printed discs composed of poly (lactic-co-glycolic acid) (PLGA) and β-tricalcium phosphate (β-TCP) for 28 days under osteogenic conditions, with and without the supplementation of BGP. The effects of BGP removal on various cellular parameters, including cell metabolic activity, alkaline phosphatase (ALP) presence and activity, proliferation, osteogenic gene expression, levels of free phosphate in the media and mineralisation, are assessed. Results: The removal of exogenous BGP increases cell metabolic activity, ALP activity, proliferation, and gene expression of matrix-related (COL1A1, IBSP, SPP1), transcriptional (SP7, RUNX2/SOX9, PPARγ) and phosphate-related (ALPL, ENPP1, ANKH, PHOSPHO1) markers in a donor dependent manner. BGP removal leads to decreased free phosphate concentration in the media and maintained of mineral deposition staining. Discussion: Our findings demonstrate the detrimental impact of exogenous BGP on hBM-MSCs cultured on a phosphate-based material and propose β-TCP embedded within 3D-printed scaffold as a sufficient phosphate source for hBM-MSCs during osteogenesis. The presented study provides novel insights into the interaction of hBM-MSCs with 3D-printed CaP based materials, an essential aspect for the advancement of bone tissue engineering strategies aimed at repairing segmental defects.

Triple-layered scaffold containing cisplatin and curcumin applied for cancerous bone regeneration

Novel drug delivery system was prepared and evaluated as for application in cancerous bone treatment. It had three stacked layers, including a drug-free layer, a cisplatin-loaded layer, and a curcumin-containing layer. Our previously characterized biomaterials, namely Zr-hydroxyapatite (Zr-HA) and alkaline-treated polycaprolactone (modified-PCL), were used as major components of the drug carrier. Polar-polar interactions between cisplatin and Zr-HA were modulated by the modified-PCL included, leading to increase of cisplatin release. Using β-cyclodextrin (β-CD) to entrap curcumin caused improvement of curcumin solubility and release. The 3D-construct was porous with internal interconnected pores according to SEM micrographs. Large amount of apatite was formed and proteins adsorbed on the scaffolds after immersed in physiologic buffer solution and in medium containing fetal bovine serum, respectively. Optimal concentrations of ascorbic acid and triamcinolone were used for induction of bone marrow stromal cells to become osteoblasts by expressing an enzyme marker, e.g., alkaline phosphatase. The prepared scaffolds were considered osteo-conductive and osteo-inductive. The concentrations of cisplatin and curcumin reached the IC50 of SK-ES-1 cells of osteosarcoma and MCF-7 cells of breast adenocarcinoma after 24 h and 3 days of release, respectively. These cancer cells were more sensitive to the combined cisplatin and curcumin than each of the drugs. Regeneration of new bone and execution of residential cancer cells in defected bone were proposed after replacing the lost bone by this established drug carrier. The assumption needs to be verified in the future using animal models.

Multilineage Differentiation Potential of Equine Adipose-Derived Stromal/Stem Cells from Different Sources

The investigation of multipotent stem/stromal cells (MSCs) in vitro represents an important basis for translational studies in large animal models. The study's aim was to examine and compare clinically relevant in vitro properties of equine MSCs, which were isolated from abdominal (abd), retrobulbar (rb) and subcutaneous (sc) adipose tissue by collagenase digestion (ASCs-_SVF) and an explant technique (ASCs-_EXP). Firstly, we examined proliferation and trilineage differentiation and, secondly, the cardiomyogenic differentiation potential using activin A, bone morphogenetic protein-4 and Dickkopf-1. Fibroblast-like, plastic-adherent ASCs-_SVF and ASCs-_EXP were obtained from all sources. The proliferation and chondrogenic differentiation potential did not differ significantly between the isolation methods and localizations. However, abd-ASCs-_EXP showed the highest adipogenic differentiation potential compared to rb- and sc-ASCs-_EXP on day 7 and abd-ASCs-_SVF a higher adipogenic potential compared to abd-ASCs-_EXP on day 14. Osteogenic differentiation potential was comparable at day 14, but by day 21, abd-ASCs-_EXP demonstrated a higher osteogenic potential compared to abd-ASCs-_SVF and rb-ASCs-_EXP. Cardiomyogenic differentiation could not be achieved. This study provides insight into the proliferation and multilineage differentiation potential of equine ASCs and is expected to provide a basis for future preclinical and clinical studies in horses.

Xeno-free culture and proliferation of hPSCs on 2D biomaterials

Human pluripotent stem cells (human embryonic stem cells (hESCs) and induced pluripotent stem cells (hiPSCs)) have unlimited proliferative potential, whereas adult stem cells such as bone marrow-derived stem cells and adipose-derived stem cells have problems with aging. When hPSCs are intended to be cultured on feeder-free or xeno-free conditions without utilizing mouse embryonic fibroblasts or human fibroblasts, they cannot be cultured on conventional tissue culture polystyrene dishes, as adult stem cells can be cultured but should be cultivated on material surfaces grafted or coated with (a) natural or recombinant extracellular matrix (ECM) proteins, (b) ECM protein-derived peptides and specific synthetic polymer surfaces in xeno-free and/or chemically defined conditions. This review describes current developing cell culture biomaterials for the proliferation of hPSCs while maintaining the pluripotency and differentiation potential of the cells into 3 germ layers. Biomaterials for the cultivation of hPSCs without utilizing a feeder layer are essential to decrease the risk of xenogenic molecules, which contributes to the potential clinical usage of hPSCs. ECM proteins such as human recombinant vitronectin, laminin-511 and laminin-521 have been utilized instead of Matrigel for the feeder-free cultivation of hPSCs. The following biomaterials are also discussed for hPSC cultivation: (a) decellularized ECM, (b) peptide-grafted biomaterials derived from ECM proteins, (c) recombinant E-cadherin-coated surface, (d) polysaccharide-immobilized surface, (e) synthetic polymer surfaces with and without bioactive sites, (f) thermoresponsive polymer surfaces with and without bioactive sites, and (g) synthetic microfibrous scaffolds.

Degenerative tendon matrix induces tenogenic differentiation of mesenchymal stem cells

PURPOSE

Mesenchymal stem cells (MSCs) react dynamically with the surrounding microenvironment to promote tissue-specific differentiation and hence increase targeted regenerative capacity. Extracellular matrix (ECM) would be the first microenvironment to interact with MSCs injected into the tissue lesion. However, degenerative tissues would have different characteristics of ECM in comparison with healthy tissues. Therefore, the influence of degenerative ECM on tissue-specific differentiation of MSCs and the formation of matrix composition need to be considered for the sophisticated therapeutic application of stem cells for tissue regeneration.

METHODS

Human degenerative tendon tissues were obtained from patients undergoing rotator cuff repair and finely minced into 2 ~ 3 mm fragments. Different amounts of tendon matrix (0.005 g, 0.01 g, 0.025 g, 0.05 g, 0.1 g, 0.25 g, 0.5 g, 1 g, and 2 g) were co-cultured with bone marrow MSCs (BM MSCs) for 7 days. Six tendon-related markers, scleraxis, tenomodulin, collagen type I and III, decorin, and tenascin-C, osteogenic marker, alkaline phosphatase (ALP), and chondrogenic marker, aggrecan (ACAN), were analyzed by qRT-PCR. Cell viability and senescence-associated beta-galactosidase assays were performed. The connective tissue growth factor was used as a positive control.

RESULTS

The expressions of six tendon-related markers were significantly upregulated until the amount of tendon matrix exceeded 0.5 g, the point where the mRNA expressions of all six genes analyzed started to decrease. The tendon matrix exerted an inhibitory effect on ACAN expression but had a negligible effect on ALP expression. Cell viability did not change significantly over the culture period. The amount of tendon matrix exceeding 0.01 g significantly increased the SA-βgal activity of BM MSCs.

CONCLUSION

This study successfully demonstrated tendon ECM-stimulated tenogenesis of BM MSCs through an indirect co-culture system without the use of exogenous growth factors and the alteration of cellular viability. In contrast to the initial hypothesis, the tenogenesis of BM MSCs induced with the degenerative tendon matrix accompanied cellular senescence.

Pterostilbene-isothiocyanate impedes RANK/TRAF6 interaction to inhibit osteoclastogenesis, promoting osteogenesis in vitro and alleviating glucocorticoid induced osteoporosis in rats

Prolonged glucocorticoid treatment often leads to glucocorticoid-induced osteoporosis (GIOP), a common iatrogenic complication. This study has explored the anti-osteoporotic potential of semi-synthetic compound, pterostilbene isothiocyanate (PTER-ITC) in GIOP rat model and bone formation potential in vitro. Dysregulated bone-remodelling leads to osteoporosis. PTER-ITC has shown anti-osteoclastogenic activity in vitro. However, its molecular target remains unidentified, which has been explored in this study through in silico and experimental approaches. Alizarin Red S and von-Kossa staining, and alkaline phosphatase (ALP) activity showed the osteogenic differentiation potential of PTER-ITC in pre-osteoblastic mouse MC3T3-E1 and human hFOB 1.19 cells, further, confirmed through the expressions of osteogenic markers at transcriptional (RT-qPCR) and translational (immunoblotting) levels. The anti-osteoclastogenic property of PTER-ITC was confirmed through inhibition of actin ring formation in mouse RAW 264.7 and human THP-1 macrophagic cells. Molecular docking and molecular dynamic simulation showed that PTER-ITC inhibited the crucial osteoclastogenic RANK/TRAF6 interaction, which was further confirmed biochemically through co-immunoprecipitation assay. Osteoporotic bone architecture [validated through scanning electron microscopy (SEM), X-ray radiography, and micro-computed tomography (µ-CT)], physiology (confirmed through compression testing, Young's modulus and stress versus strain output) and histology (verified through hematoxylin-eosin, Alizarin Red S, von-Kossa and Masson-trichrome staining) of PTER-ITC-treated GIOP female Wistar rats were assuaged. Osteoporotic amelioration through PTER-ITC treatment was further substantiated through serum biomarkers, like, parathyroid hormone (PTH), ALP, calcium (Ca²⁺), Procollagen type I N-terminal propeptide (P1NP), and 25-hydroxy vitamin D. In conclusion, this study identifies the molecular target of PTER-ITC in impeding osteoclastogenesis and facilitating osteogenesis to ameliorate osteoporosis.

Preparation and In Vitro Osteogenic Evaluation of Biomimetic Hybrid Nanocomposite Scaffolds Based on Gelatin/Plasma Rich in Growth Factors (PRGF) and Lithium-Doped 45s5 Bioactive Glass Nanoparticles

Bone tissue engineering is an emerging technique for repairing large bone lesions. Biomimetic techniques expand the use of organic-inorganic spongy-like nanocomposite scaffolds and platelet concentrates. In this study, a biomimetic nanocomposite scaffold was prepared using lithium-doped bioactive-glass nanoparticles and gelatin/PRGF. First, sol-gel method was used to prepare bioactive-glass nanoparticles that contain 0, 1, 3, and 5%wt lithium. The lithium content was then optimized based on antibacterial and MTT testing. By freeze-drying, hybrid scaffolds comprising 5, 10, and 20% bioglass were made. On the scaffolds, human endometrial stem cells (hEnSCs) were cultured for adhesion (SEM), survival, and osteogenic differentiation. Alkaline phosphatase activity and osteopontin, osteocalcin, and Runx2 gene expression were measured. The effect of bioactive-glass nanoparticles and PRGF on nanocomposites' mechanical characteristics and glass-transition temperature (T _g) was also studied. An optimal lithium content in bioactive glass structure was found to be 3% wt. Nanoparticle SEM examination indicated grain deformation due to different sizes of lithium and sodium ions. Results showed up to 10% wt bioactive-glass and PRGF increased survival and cell adhesion. Also, Hybrid scaffolds revealed higher ALP-activity and OP, OC, and Runx2 gene expression. Furthermore, bioactive-glass has mainly increased ALP-activity and Runx2 expression, whereas PRGF increases the expression of OP and OC genes. Bioactive-glass increases scaffold modulus and T _g continuously. Hence, the presence of both bioactive-glass and nanocomposite scaffold improves the expression of osteogenic differentiation biomarkers. Subsequently, it seems that hybrid scaffolds based on biopolymers, Li-doped bioactive-glass, and platelet extracts can be a good strategy for bone repair.

Improving Biological Functions of Three-Dimensional Printed Ti2448 Scaffolds by Decoration with Polydopamine and Extracellular Matrices

Extracellular matrices (ECMs) provide important cues for cell proliferation and differentiation in the complex environment, which show a significant influence on cell functions. Herein, cell-derived ECMs were deposited on the polydopamine (PDA)-decorated porous Ti-24Nb-4Zr-8Sn (Ti2448) scaffolds fabricated by the electron beam melting method in order to improve biological functions. The influence of PDA-ECM coatings on cell functions was further investigated. The results demonstrated that the PDA-ECM coating facilitated adhesion, proliferation, and migration of MC3T3-E1 cells on Ti2448 scaffolds. Moreover, Ti2448-PDA-ECM scaffolds promoted osteogenesis differentiation of cells indicated by greater alkaline phosphatase activity and further mineralization, compared to the plain Ti2448 group. Meanwhile, Ti2448-PDA-ECM scaffolds enhanced bone growth after implantation for one month in rabbit femoral bone defects. Our findings suggest that the bioinspired PDA-ECM coating can be implemented on the porous Ti2448 scaffolds, which significantly improve the biological functions of orthopedic implants.

In-vitro viability of bone scaffolds fabricated using the adaptive foam reticulation technique

The adaptive foam reticulation technique combines the foam reticulation and freeze casting methodologies of fabricating bone reparative scaffolds to offer a potential alternative to autografts. For the first time this paper studies the effect of processing on the mechanical properties and in-vitro cell growth of controllably generating a hierarchical structure of macro- (94 ± 6 to 514 ± 36 μm) and microporosity (2-30 μm) by the inclusion of camphene as a porogen during processing. Scaffolds were produced with porogen additions of 0-25 wt%. Porosity values of the structures of 85-96% were determined using the Archimedes technique and verified using X-ray Computed Tomography. The strength of the hydroxyapatite scaffolds, 5.70 ± 1.0 to 159 ± 61 kPa, correlated to theoretically determined values, 3.71 ± 0.8 to 134 ± 12 kPa, calculated by the novel incorporation of a shape factor into a standard equation. Fibroblast (3T3) and pre-osteoblast (MC3T3) cell growth was found to be significantly (P < 0.005) improved using 25 wt% porogen. This was supported by increased levels of alkaline phosphatase and was thought to result from greater dissolution as quantified by increased calcium levels in incubating media. The combination of these properties renders adaptive foam reticulation-fabricated scaffolds suitable for non-structural bone regenerative applications in non-load bearing bone defects.