1
|
Albashaireh ZSM, Taha NA, Albashaireh KZ. The effect of ascorbic acid, QMix and other conditioning solutions on the bond strength of adhesively luted glass fiber-reinforced composite posts to root dentin, a laboratory study. J Dent 2024; 149:105286. [PMID: 39103076 DOI: 10.1016/j.jdent.2024.105286] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/03/2024] [Revised: 07/31/2024] [Accepted: 08/02/2024] [Indexed: 08/07/2024] Open
Abstract
PURPOSE This study was designed to investigate the effect of post space conditioning with different solutions on the bond strength of glass FRC posts and evaluate the mode of resin failure. METHODS Sixty extracted human single rooted teeth were root filled using a resin sealer and suitable gutta-percha cones. Post spaces were prepared, and the teeth randomly allocated into 5 groups according to their irrigation regimens which included the following solutions: 17 % EDTA, 2 % CHX, 3 % NaOCl, 10 % ascorbic acid and QMix solutions. Post spaces were irrigated with 5 ml of the solution for 15 s and subsequently washed with distilled water and dried with paper points. Glass FRC posts were cemented into their spaces using a self-adhesive resin cement. The specimens were mounted in plexiglass molds using autopolymerizing acrylic resin. A universal testing machine was used to measure post retention at a crosshead speed of 2 mm/min. The results were analyzed by one-way ANOVA followed by Tukey HSD test (α = 0.05). Dislodged posts and post spaces were examined microscopically to evaluate retention failure. RESULTS The Ascorbic acid group exhibited the highest mean retentive strength value at 229 N, followed by QMix at 198 N, NaOCl at 186 N, CHX at 170 N, and EDTA at 124 N. The mean value of the ascorbic acid group was significantly higher than EDTA group, p = 0.012. The failure category was primarily mixed. CONCLUSIONS Rinsing post spaces with ascorbic acid exhibited significantly superior bond strength. The failure mode was mixed. CLINICAL SIGNIFICANCE Irrigating post spaces with ascorbic acid solution before luting FRC posts significantly improves their bond strength compared to irrigation with EDTA solution. Irrigation with QMix solution produced the second highest retentive strength but showed no statistical significance when compared to using ascorbic acid, NaOCl, CHX, or EDTA solutions.
Collapse
Affiliation(s)
- Zakereyya S M Albashaireh
- Department of Conservative Dentistry, Faculty of Dentistry, Jordan University of Science and Technology, P.O. Box 3030, Irbid 22110, Jordan.
| | - Nessrin A Taha
- Department of Conservative Dentistry, Faculty of Dentistry, Jordan University of Science and Technology, P.O. Box 3030, Irbid 22110, Jordan
| | - Khawlah Z Albashaireh
- Department of Conservative Dentistry, Faculty of Dentistry, Jordan University of Science and Technology, P.O. Box 3030, Irbid 22110, Jordan
| |
Collapse
|
2
|
Khoury RD, de Carvalho LS, do Nascimento MFR, Alhussain F, Abu Hasna A. Endodontic irrigants from a comprehensive perspective. World J Clin Cases 2024; 12:4460-4468. [PMID: 39070803 PMCID: PMC11235474 DOI: 10.12998/wjcc.v12.i21.4460] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 12/20/2023] [Revised: 05/06/2024] [Accepted: 06/03/2024] [Indexed: 06/30/2024] Open
Abstract
This review article explores the fundamental principles of modern endodontics with a focus on root canal cleaning and shaping. It reviews commonly used endodontic irrigant, namely sodium hypochlorite (NaOCl), herbal extracts, chlorhexidine (CHX), and chelating agents, highlighting their properties, applications, and potential drawbacks. NaOCl, a key antimicrobial agent, demonstrates effectiveness against various microorganisms but poses challenges such as high cytotoxicity. Herbal extracts, gaining recognition in endodontics, present an alternative with potential advantages in preserving dentin integrity. CHX, known for its broad-spectrum antimicrobial activity, is discussed in both liquid and gel formulations, emphasizing its role in reducing smear layer formation and preserving hybrid layer durability. Chelating agents, specifically ethylenediaminetetraacetic acid and citric acid, play a vital role in removing the smear layer, enhancing dentin permeability, and facilitating the penetration of antimicrobial agents. The review article underscores the importance of careful application and consideration of each irrigant's properties to ensure safe and effective endodontic procedures. It serves as a valuable guide for clinicians in selecting appropriate irrigants based on specific treatment requirements.
Collapse
Affiliation(s)
- Rayana Duarte Khoury
- Department of Restorative Dentistry, Endodontics Division, Institute of Science and Technology, São Paulo State University, São José dos Campos 12245000, SP, Brazil
| | - Lara Steffany de Carvalho
- Department of Biosciences and Oral Diagnosis, Institute of Science and Technology, São Paulo State University, São José dos Campos 12245000, SP, Brazil
| | - Mauro Felipe Rios do Nascimento
- School of Dentistry, The National Institute of Higher Education and Postgraduate Studies Padre Gervásio-INAPÓS, Pouso Alegre 37550-121, MG, Brazil
| | - Fadi Alhussain
- School of Dentistry, Syrian Private University, Al Kiswah 877C+P2, Damascus, Syria
| | - Amjad Abu Hasna
- Department of Restorative Dentistry, Endodontics Division, Institute of Science and Technology, São Paulo State University, São José dos Campos 12245000, SP, Brazil
- School of Dentistry, Universidad Espíritu Santo, Samborondón 092301, Ecuador
| |
Collapse
|
3
|
Yanık D, Turker N. Glycolic acid on push-out bond strength of fiber post and smear removal: an in vitro study. Odontology 2024; 112:739-750. [PMID: 38507151 DOI: 10.1007/s10266-024-00928-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/29/2023] [Accepted: 11/16/2023] [Indexed: 03/22/2024]
Abstract
This study aims to investigate glycolic acid (GA) as a final irrigant on push-out bond strength of fiber post and smear removal. Ninety mandibular premolars were stabilized with a silicone key and photographed, and canal cross-section was calculated by image processing software. Round canal morphology was selected. The specimens were divided into five groups (n = 18); 10%GA, 17%EDTA, NaOCl + 10%GA, NaOCl + 17%EDTA, and the control. Fifteen specimens were used for the push-out. Three specimens were evaluated using a scanning electron microscope after post space preparation. Two-way ANOVA and Chi-square were used for statistics. GA presented higher strength than EDTA (p < 0.05). The NaOCl + GA showed higher strength than the NaOCl + EDTA (p < 0.05). The highest values were observed in cervical and lowest in apical thirds (p < 0.05). The most failure type was between dentin and resin (p < 0.05). GA removed the smear in the post space including the apical third. The NaOCl + GA has superiority to NaOCl + EDTA on push-out strength. Glycolic acid improved the bond strength of fiber post when used as a final post space irrigant. The combination of NaOCl and glycolic acid did not negatively affect the bond strength and was more effective compared to the combination with EDTA. Glycolic acid improved the bond strength of fiber post when used as a final post space irrigant. The combination of NaOCl and glycolic acid did not negatively affect the bond strength and was more effective compared to the combination with EDTA.
Collapse
Affiliation(s)
- Deniz Yanık
- Department of Endodontics, Faculty of Dentistry, Süleyman Demirel University, Isparta, Turkey.
| | - Nurullah Turker
- Department of Prosthodontics, Faculty of Dentistry, Akdeniz University, Antalya, Turkey
| |
Collapse
|
4
|
AlGhamdi AS, Alotaibi B, Alsalhi H, Almutairi N, Barakat A, AlSheikh R, Hinai MTAA, Alqarawi FK. Effectiveness of Morinda Citrofolia, Sapindus Mukorossi, and Curcumin used in curry spice, to the radicular canal irrigant in improving bond integrity of glass fiber post. Photodiagnosis Photodyn Ther 2023; 42:103526. [PMID: 36996965 DOI: 10.1016/j.pdpdt.2023.103526] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/26/2023] [Revised: 03/19/2023] [Accepted: 03/21/2023] [Indexed: 03/30/2023]
Abstract
AIM Evaluation of the push-out bond strength (PBS) of glass fiber reinforced post (GFRP) bonded to root dentin after canal disinfection using food-based root canal irrigants i.e., Curcumin photosensitizer (CP), Riboflavin photosensitizer (RFP), Morinda Ctrifolia juice (MCJ) and Sapindus Mukorossi (SM) along with MTAD as a final irrigant. MATERIAL METHODS Fifty human single-rooted premolar teeth were decoronated. Endodontic preparation was performed along with 2.25% sodium hypochlorite NaOCl solution followed by EDTA solution. Canals were dried and obturated followed by post-space preparation by removing GP. Specimens were allocated into five groups based on different food-based disinfection regimes (n= 10). Group 1: 2.25% NaOCl + MTAD (Control), Group 2: 6% MCJ + MTAD, Group 3: SM + MTAD, Group 4: CP + MTAD and Group 5: RFP + MTAD. All GFRP were bonded to radicular dentin. Root sectioning was performed followed by PBS and failure analysis using a universal testing machine (UTM) and stereomicroscope respectively. The data were analyzed using a one-way analysis of variance (ANOVA) test and the Post Hoc Tukey HSD test (p=0.05). RESULTS Samples disinfected with(MCJ+MTAD) at coronal third demonstrated maximum PBS (9.41±0.51 MPa). However, the apical third of group 5 (RFP + MTAD) exhibited the minimum values (4.06±0.23 MPa). Intergroup comparison analysis unveiled that group 2 (MCJ +MTAD) and group 3 (SM+MTAD) displayed comparable outcomes of PBS at all three-thirds. Similarly, samples in group 1 (2.25% NaOCl+ MTAD), group 4 (CP + MTAD), and group 5 (RFP + MTAD) exhibited comparable PBS. CONCLUSION Fruit-based irrigants Morinda Citrifolia and Sapindus Mukorossi have the potential to be used as root canal irrigants with a positive influence on bond strength.
Collapse
|
5
|
AlMokhatieb AA. The effect of 400 nm femtosecond laser and Zn(II)chlorin e6 methyl ester (Zn(II)e6Me) photosensitizer on disinfection of radicular dentin bonded to glass fiber post. Photodiagnosis Photodyn Ther 2022; 40:103120. [PMID: 36116674 DOI: 10.1016/j.pdpdt.2022.103120] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/27/2022] [Revised: 09/11/2022] [Accepted: 09/13/2022] [Indexed: 12/14/2022]
Abstract
AIM To assess and compare push-out bond strength (PBS) when canal disinfected with 5.25% NaOCl, 400 nm femtosecond laser, and natural PS activated by PDT (CP and Zn (II) Ce6 methyl ester) on bond efficacy of radicular dentin bonded to glass fiber post. MATERIAL AND METHODS A sum of 40 non-traumatic, cautiously extracted with closed apex human mandibular premolars were collected and decoronated up to the cement-o-enamel junction. Canals of all specimens were cleaned and shaped using a Protaper universal NiTi system via a crown-down approach, then finally dried out and obturated with gutta-percha. Post alignment space was formed with peso reamers and sanitized. Then samples were randomly allocated into four groups as per the radicular dentin designated disinfection protocols. Group 1 disinfected with curcumin photosensitizer + EDTA, group 2: 5.25% NaOCl and EDTA, group 3: Zn (II) Ce6 methyl ester and EDTA and group 4 sanitized with 400 nm fs-laser + EDTA. GFP was cemented into the radicular canal space and specimens were placed in a thermocycler. Segmentation of the root was done at three levels (coronal, middle, and apical) and positioned in a universal testing machine for PBS analysis. Failure mode analysis was performed using a stereomicroscope and statistical analysis was executed by one-way ANOVA and Tukey multiple comparison tests at a statistically significant level of p < 0.05. RESULTS The highest PBS was revealed by group 2 canal disinfected with 5.25% NaOCl +17% EDTA (control) at coronal (9.49 ± 1.42 MPa) and middle (7.545 ± 0.15 MPa) root levels. Whereas, the lowest PBS was displayed by group 3: Zn (II) Ce6 methyl ester +17% EDTA at coronal (6.31 ± 0.54 MPa) middle (4.85 ± 0.11 MPa) root levels respectively. Intergroup comparison presented that radicular dentin disinfected with 400 nm femtosecond laser + 17% EDTA substantiated comparable PBS result to group 2 (control) at all three root levels (p > 0.05). Likewise, root surface disinfection with Curcumin activated by PDT+17% EDTA unveiled no statistically significant result for specimens disinfected with Zn(II) Ce6 methyl ester +17% EDTA(p > 0.05). Furthermore, apical root segments in all groups showed a substantial decrease in PBS value and were comparable (p > 0.05). CONCLUSION The bond efficacy of glass fiber post to radicular dentin disinfected with 400 nm femtosecond laser has the potential to be used as an alternative to conventional sodium hypochlorite.
Collapse
Affiliation(s)
- Ahmed A AlMokhatieb
- Conservative Dental Department, College of Dentistry, Prince Sattam bin Abdul Aziz University, Alkharj, Saudi Arabia.
| |
Collapse
|
6
|
Khanum Hm K, Abdulmajeed Barakat A, Qamar Z, Reddy RN, Vempalli S, Ramadan AH, Niazi F, Noushad M. Glass fiber post resistance to dislodgement from radicular dentin after using contemporary and conventional methods of disinfection. Photodiagnosis Photodyn Ther 2022; 40:103026. [PMID: 35872354 DOI: 10.1016/j.pdpdt.2022.103026] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/10/2022] [Revised: 07/17/2022] [Accepted: 07/20/2022] [Indexed: 12/14/2022]
Abstract
AIM The present study aimed to assess the bond integrity of curcumin photosensitizer (CPS) Photodynamic therapy (PDT) on fiber post disinfection bonded to radicular dentin in comparison to the conventional fiber post sterilant used. MATERIALS AND METHODS Fifty human permanent single-rooted premolars were utilized with the crown part sectioned using up to the cementoenamel junction. Root canal preparation was performed followed by canal obturation with gutta-percha (GP) and resin-based sealer. The post space was prepared using peso reamers leaving 4 mm at the apical part of the post space. Fifty glass fiber posts (GFP) were divided into five groups based on the surface disinfectant (n = 10). group 1: Autoclave sterilization (AS) group 2: chlorhexidine digluconate (CHX dig), group 3: CPS solution, group 4: 35% phosphoric acid (PA) gel, and group 5: No disinfection. Cementation was performed using dual-cure self-etch resin cement. Each tooth was sectioned and placed on the universal testing machine. Failure mode was analyzed using a stereomicroscope at 40x magnification. Statistical analysis was performed using one-way analysis of variance (ANOVA) and Tukey multiple comparison tests. (p = 0.05). RESULTS Intragroup comparison analysis demonstrated that group 2 in which 2% CHX dig was used as a post-surface disinfectant revealed the highest bond integrity at all three levels. Group 5 where no disinfectant was used to decontaminate the post surface exhibited the lowest bond values. In all the investigated groups, PBS values showed a downward trend from coronal to the apical third of the post space. Group 1 in which AS was used to sterilize the fiber post and group 3 in which CPS was smeared to decontaminate the GFPs surface-displayed comparable outcomes of PBS to group 5 specimens at all three levels. (p > 0.05). CONCLUSION CHX dig and PA post-surface disinfection displayed a positive impact on bond strength with the radicular dentin. However, CPS and AS do not reveal any effect on the PBS when used for post-decontamination.
Collapse
Affiliation(s)
- Khuthija Khanum Hm
- Department of Restorative and Prosthetic Dentistry, College of Dentistry, Dar Al Uloom University, Riyadh, Saudi Arabia.
| | - Ali Abdulmajeed Barakat
- Department of Restorative and Prosthetic Dentistry, College of Dentistry, Dar Al Uloom University, Riyadh, Saudi Arabia.
| | - Zeeshan Qamar
- Department of OMFS and Diagnostic Sciences, Faculty of Dentistry, Riyadh Elm University, Riyadh, Saudi Arabia.
| | - R Naveen Reddy
- Department of Prosthodontics, Faculty of Dentistry, Jazan University, Jazan, Saudi Arabia.
| | - Swetha Vempalli
- Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Jazan University, Jazan, Saudi Arabia.
| | - Anas Hussam Ramadan
- Department of OMFS and Diagnostic Sciences, Faculty of Dentistry, Riyadh Elm University, Riyadh, Saudi Arabia.
| | - Fayez Niazi
- Department of Restorative and Prosthetic Dentistry, College of Dentistry, Dar Al Uloom University, Riyadh, Saudi Arabia.
| | - Mohammed Noushad
- Department of Restorative and Prosthetic Dentistry, College of Dentistry, Dar Al Uloom University, Riyadh, Saudi Arabia.
| |
Collapse
|
7
|
Jurema ALB, Correia AMDO, Spinola MDS, Bresciani E, Caneppele TMF. Influence of different intraradicular chemical pretreatments on the bond strength of adhesive interface between dentine and fiber post cements: A systematic review and network meta-analysis. Eur J Oral Sci 2022; 130:e12881. [PMID: 35673777 DOI: 10.1111/eos.12881] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/21/2021] [Accepted: 05/11/2022] [Indexed: 11/26/2022]
Abstract
Systematic review and network meta-analyses were performed to answer the question: Do intraradicular chemical pretreatments affect the bond strength of the adhesive interface between dentine and fiber post cements? A literature search was performed in PubMed, Scopus, Web of Science, LILACS, BBO, and Cochrane Library in October 2018 (updated September 2021). In vitro studies that compared the bond strength assessed by push-out tests following at least two dentine chemical treatments prior to fiber post cementation were included. Risk of bias was evaluated. A random-effects Bayesian-mixed treatment comparison model was used to compare push-out bond strength of different chemical pretreatments. SUCRA (surface area under the cumulative ranking) analysis was performed to rank the pretreatments. After removing duplicates and screening titles and abstracts, 61 studies remained. SUCRA analysis showed that the best bond strength values for self-etch, etch-and-rinse, and self-adhesive cements were ethyl acetate (SUCRA: 99.8%), low concentration NaOCl (SUCRA: 83.4%), and grape seed extract (SUCRA: 97.6%), respectively. According to the SUCRA rankings, ethanol was in a good position for all adhesive strategies (SUCRA: 78.6%). The use of chemical pretreatments in intraradicular dentine of endodontically treated teeth depends on the adhesive and cementation strategy. The pretreatment generally associated with the highest bond strength was ethanol.
Collapse
Affiliation(s)
- Ana Luiza Barbosa Jurema
- Department of Restorative Dentistry, São Paulo State University- UNESP, Institute of Science and Technology, São Paulo, Brazil
| | | | - Manuela da Silva Spinola
- Department of Restorative Dentistry, São Paulo State University- UNESP, Institute of Science and Technology, São Paulo, Brazil
| | - Eduardo Bresciani
- Department of Restorative Dentistry, São Paulo State University- UNESP, Institute of Science and Technology, São Paulo, Brazil
| | - Taciana Marco Ferraz Caneppele
- Department of Restorative Dentistry, São Paulo State University- UNESP, Institute of Science and Technology, São Paulo, Brazil
| |
Collapse
|
8
|
Novis RM, Leon B, França F, Turssi CP, Basting RT, Amaral F. Push-out Bond Strength of Two Fiber Posts in Composite Resin Using Different Types of Silanization. Oper Dent 2022; 47:173-182. [PMID: 35604820 DOI: 10.2341/20-115-l] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 11/07/2020] [Indexed: 11/23/2022]
Abstract
OBJECTIVES The aim of this study was to evaluate the effect of different surface treatments and thermocycling (TC) on the push-out bond strength of two brands of glass fiber posts (GFPs) to composite resin. METHODS White Post DC (WP) (FGM Dental Group International, Joinville, Santa Catarina, BR) and Exacto (EC) (Angelus, Clinical Research Dental, Londrina, PR, Brazil). GFPs were cleaned with 70% alcohol and divided into five groups, according to the surface treatment (n=15): control (C), without treatment; prehydrolyzed silane (S-pre) (Prosil, FGM Dental Group International); 37% phosphoric acid + prehydrolyzed silane AcS-pre); Scotchbond Universal Adhesive System (AdU), 3M Oral Care; two-bottle silane (S2B) (Dentsply Sirona Inc). The composite resin was inserted around the posts by using a split matrix. The samples were cut into 1-mm slices. Half of the samples were subjected to the push-out test immediately, and the other half underwent TC before the test. After failure analysis, the data were submitted to three-way analysis of variance (ANOVA) (α=0.05). RESULTS EC achieved higher bond strength than WP, regardless of TC (p<0.05). Regarding WP, surface treatments (p<0.001) and TC (p<0.001) influenced bonding strength. As for EC without TC, the highest bond strength (p<0.05) was found for C, then AcSpre, S-pre, AdU, and S2B. Application of TC resulted in a statistically higher bond strength values for the EC AcS-pre group (p<0.05), followed by S2B, S-pre, C, and AdU. The WP failures were predominantly cohesive, similar to the EC AdU and EC S2B groups. The other EC groups showed mostly mixed failures. CONCLUSIONS Surface treatment and TC affected the bond strength to composite resin, depending on which post was used. It is important for dentists to understand the effects of different types of silanization on their chosen post.
Collapse
Affiliation(s)
- R M Novis
- *Roberta Maria Novis, DDS, MS, PhD candidate, São Leopoldo Mandic Institute and Dental Research Center, Campinas, São Paulo, Brazil
| | - Blt Leon
- Blanca Liliana Torres Leon, DDS, MS, PhD, professor, Bahia Federal University, Salvador, Bahia, Brazil
| | - Fmg França
- Fabiana Mantovani Gomes França, DDS, MSc, PhD, professor, São Leopoldo Mandic Institute and Dental Research Center, Campinas, São Paulo, Brazil
| | - C P Turssi
- Cecilia Pedroso Turssi, DDS, MSc, PhD, professor, São Leopoldo Mandic Institute and Dental Research Center, Campinas, São Paulo, Brazil
| | - R T Basting
- Roberta Tarkany Basting, DDS, MS, PhD, professor, São Leopoldo Mandic Institute and Dental Research Center, Campinas, São Paulo, Brazil
| | - Flb Amaral
- Flávia Lucisano Botelho Amaral, DDS, MSc, PhD, professor, São Leopoldo Mandic Institute and Dental Research Center, Campinas, São Paulo, Brazil
| |
Collapse
|
9
|
Alkahtani F. Efficacy of chemical and Photoactivated disinfectants against Candida Albicans and assessment of hardness, roughness, and mass loss of acrylic denture base resin. Photodiagnosis Photodyn Ther 2022; 39:102911. [PMID: 35595187 DOI: 10.1016/j.pdpdt.2022.102911] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/05/2022] [Revised: 05/11/2022] [Accepted: 05/13/2022] [Indexed: 11/29/2022]
Abstract
AIM The present study aimed to assess the antimicrobial efficacy of hematoporphyrin derivative, sodium hypochlorite (NaOCl), glutaraldehyde (GaH), and a chlorhexidine (CHX) on mass loss (ML), microhardness, and surface roughness (Ra) of acrylic denture base colonized with C. Albicans. MATERIAL AND METHODS A total of 40 heat cure acrylic resin dentures were fabricated and inoculated by the American Type Culture Collection (ATCC) of C. Albicans in an in-vitro situation. Specimens were divided into four groups (n=10) based on the method of disinfection. Hematoporphyrin derivatives, 1% NaOCl, 2% GaH, and 4% CHX.The pre and post candida (CFU/ml) counts were recorded before and after immersion. ML, microhardness, and Ra of acrylic denture were also assessed. Statistical analysis was executed for CFU/mL (log10) for exposed C. Albicans by two-way ANOVA and Tukey's multiple tests (p>0.05). For normality of the data, Dunnet's Simultaneous test was performed. RESULTS In terms of candida strain analysis, pretreatment to posttreatment comparisons revealed a reduction in mean Candida count in all groups (p<0.05). The highest ML value after post candida disinfection of acrylic denture was observed in 2% GaH (1.587 ± 0.25) treated specimens. The least microhardness value was found in group 1 when treated with hematoporphyrin (0.97 ± 0.22 VHN) which was significantly different from other groups (p<0.05). Group 1 surface treated with hematoporphyrin derivate (1.84 ± 0.22 μm) showed the highest Ra values (p<0.05). CONCLUSION Acrylic denture base resin colonized with C. Albicans when treated with a chemical disinfectant of 4% chlorhexidine displayed the highest antimicrobial efficacy with reduced mass loss, less surface roughness, and maximum denture hardness.
Collapse
Affiliation(s)
- Fahad Alkahtani
- Department of prosthodontics, College of Dentistry, Prince Sattam Bin Abdulaziz University, Alkharj 11942, Saudi Arabia.
| |
Collapse
|
10
|
Radicular canal disinfection using Photodynamic therapy and Sodium Hypochlorite following three chelating agents’ green tea extract, grape extract, and Ethylenediaminetetraacetic acid on the push-out bond strength of epoxy resin-based sealer. Photodiagnosis Photodyn Ther 2022; 38:102809. [DOI: 10.1016/j.pdpdt.2022.102809] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/02/2022] [Revised: 03/08/2022] [Accepted: 03/10/2022] [Indexed: 11/23/2022]
|
11
|
Effect of Passive Ultrasonic Irrigation over Organic Tissue of Simulated Internal Root Resorption. Int J Dent 2021; 2021:3130813. [PMID: 34745262 PMCID: PMC8570868 DOI: 10.1155/2021/3130813] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/07/2021] [Revised: 09/13/2021] [Accepted: 10/15/2021] [Indexed: 01/17/2023] Open
Abstract
This study aimed to evaluate the efficacy of passive ultrasonic irrigation (PUI) on dissolving the organic tissue inside simulated internal root resorption (IRR) using sodium hypochlorite (NaOCl) or chlorhexidine (CHX). A total of 40 human lower premolars were collected based on dimensional and morphological similarities. The roots were embedded in cylinders (3 cm diameter; 2.5 cm height) of self-cured acrylic resin, and then an IRR was simulated. The specimens were divided into 4 groups (n = 10) according to irrigation protocols: group 1: CHX + PUI; group 2: CHX; group 3: NaOCl + PUI; group 4: NaOCl. The total irrigation time was 150 s at a flow rate of 5 mL/min. A tissue mass of porcine palatine mucosa was used to simulate the organic tissue, it was weighed before and after the irrigation using an analytic balance, and the difference between both readings was calculated and transferred to percentage values. Data were submitted to statistical analysis using two-way ANOVA (factors: irrigant type and with/without PUI) and Tukey's test for multiple comparisons among the experimental groups (α = 0.05). There was a significant difference in both factors (irrigant: p=0.04; PUI: p ≤ 0.001). The groups that used PUI were more effective in dissolving the organic tissue of the IRR simulation than the groups without PUI. PUI is more effective than the syringe and needle irrigation in organic tissue dissolution.
Collapse
|
12
|
Al-Hamdan RS. Caries effected dentin disinfection using Ozone, methylthioninium chloride and turmeric activated by photodynamic therapy on bond integrity of resin-modified glass ionomer cement. Photodiagnosis Photodyn Ther 2021; 36:102613. [PMID: 34737058 DOI: 10.1016/j.pdpdt.2021.102613] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/08/2021] [Revised: 10/22/2021] [Accepted: 10/28/2021] [Indexed: 10/20/2022]
Abstract
AIM To evaluate the shear bond strength (SBS) of caries effected dentin (CAD) bonded to resin-modified glass ionomer cement (RMGIC) after being disinfected with different methods their effect on microleakage scores. MATERIAL AND METHODS Based on criteria of ICDAS seventy-five teeth were selected and disinfected. All samples were grounded and a cavity prepared followed by random allocation of samples into different disinfection groups i.e., methylene blue photosensitizer (MBP), Silver diamine fluoride (SDF), Ozone (O3); curcumin photosensitizer (CP) and chlorhexidine (CHX) (n = 15). All samples were restored with resin modified glass ionomer (RMGIC) incrementally. Ten specimens from each group were placed in universal testing machine (UTM) to calculate bond failure and failure type. Five samples from each group were evaluated for microleakage scores. SBS and microleakage scores was examined using analysis of variance (ANOVA) with a Post-hoc test. For all tests p-value, less than 0.5 was considered statistically significant. RESULTS The highest SBS was observed in CAD disinfected with CP bonded to RMGIC (16.42 ± 1.10 MPa). Similarly, the lowest bond values were demonstrated by CAD disinfected with MBP (9.21 ± 0.22 MPa) bonded to RMGIC respectively. CAD disinfected with CHX (Control) bonded to RMGIC demonstrated the lowest microleakage scores and showed a significant difference compared to other experimental groups (p< 0.05). CONCLUSION Curcumin along with O3 has the potential to be used as a disinfectant in CAD as it improves SBS to RMGIC. CHX demonstrates low microleakage scores with decrease of bond integrity.
Collapse
Affiliation(s)
- Rana Sulaiman Al-Hamdan
- Department of Restorative Dental Sciences, Operative Division, College Of Dentistry, King Saud University, Riyadh , 11545, Saudi Arabia.
| |
Collapse
|
13
|
Al-Saleh S, Albaqawi AH, Alrawi F, Tulbah HI, Al-Qahtani AS, Heer E, Nisar SS, Vohra F, Abduljabbar T. Effectiveness of synthetic and natural photosensitizers and different chemical disinfectants on the contaminated metal crown. Photodiagnosis Photodyn Ther 2021; 36:102601. [PMID: 34699981 DOI: 10.1016/j.pdpdt.2021.102601] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/03/2021] [Revised: 10/13/2021] [Accepted: 10/18/2021] [Indexed: 10/20/2022]
Affiliation(s)
- Samar Al-Saleh
- Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, PO Box 60169, Riyadh 11545, Saudi Arabia; Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh, Saudi Arabia..
| | - Ahmed Heji Albaqawi
- Department of Restorative Dental Science, College of Dentistry, University of Ha'il, Ha'il, 55476, Saudi Arabia.
| | - Feras Alrawi
- Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, PO Box 60169, Riyadh 11545, Saudi Arabia; Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh, Saudi Arabia
| | - Huda I Tulbah
- Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh, Saudi Arabia..
| | - Amal S Al-Qahtani
- Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh, Saudi Arabia..
| | - Emal Heer
- Department of Pharmacology, Dr Ishrat Ul Ebad Khan Institute of Oral Health Sciences, Dow University of Health Sciences, Karachi, Pakistan
| | - Sidra Sadaf Nisar
- Department of Science of Dental Material, Dow International Dental College, Karachi, Pakistan
| | - Fahim Vohra
- Department of Prosthetic Dental Science, College of Dentistry, King Saud University; Research Chair for Biological Research in Dental Health, College of Dentistry, Riyadh 11545, Saudi Arabia.
| | - Tariq Abduljabbar
- Department of Prosthetic Dental Science, College of Dentistry, King Saud University; Research Chair for Biological Research in Dental Health, College of Dentistry, Riyadh 11545, Saudi Arabia.
| |
Collapse
|
14
|
Al-Kheraif AA, Mohamed BA, Khan AA, Al-Shehri AM. Role of Riboflavin; Curcumin photosensitizers and Ozone when used as canal disinfectant on Push-out bond strength of glass fibre post to radicular dentin. Photodiagnosis Photodyn Ther 2021; 37:102592. [PMID: 34673270 DOI: 10.1016/j.pdpdt.2021.102592] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/26/2021] [Revised: 10/09/2021] [Accepted: 10/15/2021] [Indexed: 12/17/2022]
Abstract
AIM To assess the efficacy of photosensitizers (CP, riboflavin) and gaseous ozone in comparison to the conventional radicular dentin disinfectant (NaOCl) on push-out bond strength (PBS) of PFRC post cemented to radicular dentin MATERIAL AND METHOD: Human single-rooted teeth were collected, steriled implanted in polyvinyl pipes up to a cement-o-enamel junction and de coronated. Cleaning and shaping of the canal were performed using the crown down technique followed by obturation of the canal space. Canal space was prepared using peso reamers and samples were divided into four groups based on types of canal disinfectant protocols. Group 1: Riboflavin+ 17%EDTA; group 2: Curcumin Photosensitizer + 17% EDTA; group 3: Gaseous Ozone disinfection (O3) +17% EDTA and group 4 control 2.5% NaOCl +17% EDTA. Within the canal space, fiber post was cemented and cured, and thermocycled. PBS was evaluated using a Universal testing machine (UTM) and failure modes using a stereomicroscope at 40x magnification. One-way analysis of variance (ANOVA) was used to determine the mean and standard deviation of push-out bond strength (PBS). The Tukey multiple comparison tests (p = 0.05) was used to compare the means of PBS RESULTS: The highest PBS was displayed in group 2 CP+ 17% EDTA at all three root levels, coronal (8.81±0.61), middle (7.77±0.55), and apical (5.25±0.61). The lowest PBS was revealed in group 4, disinfected with 2.5% NaOCl +17% EDTA (control) at coronal (6.12±0.54), middle (5.46±0.84), and apical (3.00±1.88) levels. The most prevailed fracture mode was an adhesive failure (cement-dentin interface). CONCLUSION Radicular dentin disinfected with PDT using CP, riboflavin, and O3 displayed similar PBS at all root segments. NaOCl is a convenient, traditional, and commonly used disinfectant, and it's effects on PBS is still controversial.
Collapse
Affiliation(s)
- Abdulaziz A Al-Kheraif
- Dental Health Department, College of Applied Medical Sciences, King Saud University, P. O. Box: 10219, Riyadh 11433, Saudi Arabia.
| | - Badreldin A Mohamed
- Community Health Department, College of Applied Medical Sciences, King Saud University, Riyadh, Saudi Arabia
| | - Aftab Ahmed Khan
- Dental Health Department, College of Applied Medical Sciences, King Saud University, P. O. Box: 10219, Riyadh 11433, Saudi Arabia
| | - Abdullah M Al-Shehri
- Dental Health Department, College of Applied Medical Sciences, King Saud University, P. O. Box: 10219, Riyadh 11433, Saudi Arabia
| |
Collapse
|
15
|
Bohrer TC, Fontana PE, Rocha RO, Kaizer OB. Post-Space Treatment Influences the Bond Strength In Endodontically Treated Teeth: A Systematic Review and Meta-Analysis of In Vitro Studies. Oper Dent 2021; 46:E132-E157. [PMID: 34370019 DOI: 10.2341/19-277-lit] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 09/02/2020] [Indexed: 11/23/2022]
Abstract
OBJECTIVES This systematic review of in vitro studies investigated the influence of the post-space treatment used to remove the smear layer on the bond strength of the post to root canal dentin. METHODS AND MATERIALS In vitro studies included in this study were identified from PubMed/MEDLINE, Lilacs, and Scopus databases up until March 2019, without limits on publication year or language. Two reviewers independently selected the studies based on the inclusion and exclusion criteria, extracted the data, and evaluated the risk of bias of all studies. A random effects model was used for pairwise meta-analyses (control vs. post-space preparation groups) at a significance level of p<0.05. RESULTS Of the 2,832 potentially eligible studies, 453 studies were selected for full-text analysis, and 75 were included in this systematic review. Only one study was considered to have a low risk of bias. Overall, post-space treatment significantly improves the bond strength to root canal dentin (p<0.00001). CONCLUSION Post-space treatment has a positive influence on the bond strength of the post to root canal dentin. In this review, the post-space treatments that improve the adhesive resistance of the post were ethanol, sodium hypochlorite, and ethylene diamine tetra-acetic acid (NaOCl + EDTA), NaOCl + EDTA + ultrasound, erbium-doped yttrium aluminium garnet laser (Er:YAG laser), neodymium-doped yttrium aluminium garnet laser (Nd:YAG laser), and diode laser.
Collapse
|
16
|
Yuanli H, Juan W, Mengzhen J, Xuan C, Kaixin X, Xueqin Y, Xin Q, Hantao H, Yuan G, Ling Z. The effect of two endodontic sealers and interval before post-preparation and cementation on the bond strength of fiber posts. Clin Oral Investig 2021; 25:6211-6217. [PMID: 33818684 DOI: 10.1007/s00784-021-03920-w] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/19/2020] [Accepted: 03/29/2021] [Indexed: 02/05/2023]
Abstract
OBJECTIVES To evaluate the effect of different endodontic sealers (epoxy resin-based and bioceramic-based) and the time of post-cementation on the bond strength of a fiber post cemented with resin cement. METHODS Forty human premolars were instrumented and divided into 4 groups. According to the type of sealer and the time of post-cementation: AH-IM (AH Plus, post-cemented immediately after root canal treatment), SP-IM (iRoot SP, post-cemented immediately after root canal treatment), AH-OW (AH Plus, post-cementation after one week), and SP-OW (iRoot SP, post-cementation after one week). In each group, the samples were submitted to push-out test, and failure mode was assessed. Levene's test, one-way ANOVA, and Kruskal-Wallis analysis were applied for statistical analysis (α = 5%). RESULTS The highest mean push-out bond strength was obtained from the SP-IM group in the apical part (10.45 ± 5.15MPa), while the lowest was observed in samples from the AH-OW group in the middle part (2.63 ± 1.54 MPa). One-way ANOVA showed that within the same root region, the time of post-cementation had a negative influence on the bonding strength in the SP groups in the middle and apical portion (P<0.05), however, when comparing the effect of type of sealers on bonding strength between the OW groups or IM groups within the same root region, no significant difference was observed regardless of the post cementation time (P>0.05). CONCLUSIONS The bond strength of the fiber post was higher when the post was cemented immediately after root canal treatment when the bioceramic sealer was applied. CLINICAL RELEVANCE The correct choice of an endodontic sealer and the proper time of post-cementation may help to obtain the best quality of post-and-core restoration.
Collapse
Affiliation(s)
- He Yuanli
- State Key Laboratory of Oral Diseases, Sichuan University, Chengdu, 610041, China.,National Clinical Research Center for Oral Diseases, Department of Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
| | - Wu Juan
- State Key Laboratory of Oral Diseases, Sichuan University, Chengdu, 610041, China.,National Clinical Research Center for Oral Diseases, Department of Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
| | - Ji Mengzhen
- State Key Laboratory of Oral Diseases, Sichuan University, Chengdu, 610041, China.,National Clinical Research Center for Oral Diseases, Department of Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
| | - Chen Xuan
- State Key Laboratory of Oral Diseases, Sichuan University, Chengdu, 610041, China.,National Clinical Research Center for Oral Diseases, Department of Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
| | - Xiong Kaixin
- State Key Laboratory of Oral Diseases, Sichuan University, Chengdu, 610041, China.,National Clinical Research Center for Oral Diseases, Department of Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
| | - Yang Xueqin
- State Key Laboratory of Oral Diseases, Sichuan University, Chengdu, 610041, China.,National Clinical Research Center for Oral Diseases, Department of Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
| | - Qiao Xin
- State Key Laboratory of Oral Diseases, Sichuan University, Chengdu, 610041, China.,National Clinical Research Center for Oral Diseases, Department of Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
| | - Hu Hantao
- State Key Laboratory of Oral Diseases, Sichuan University, Chengdu, 610041, China.,National Clinical Research Center for Oral Diseases, Department of Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
| | - Gao Yuan
- State Key Laboratory of Oral Diseases, Sichuan University, Chengdu, 610041, China.,National Clinical Research Center for Oral Diseases, Department of Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
| | - Zou Ling
- State Key Laboratory of Oral Diseases, Sichuan University, Chengdu, 610041, China. .,National Clinical Research Center for Oral Diseases, Department of Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China.
| |
Collapse
|
17
|
Wahab FK, Mahasneh SA, Sawair FA, Hamdan MA, Hattar SN, AL-Rabab’ah MA. Restoration of Root Filled Teeth; Current Opinions and Techniques. Open Dent J 2021. [DOI: 10.2174/1874210602115010071] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/21/2023] Open
Abstract
Purpose:
To examine current decision-making preferences of Jordanian dentists when Restoring Root Filled Teeth (RFT).
Materials and Methods:
834 Jordanian general dentists, prosthodontists and endodontists were invited to participate in a validated online survey with a 62% participation rate. Respondents were invited to answer 24 questions about their preferences for techniques and materials they use to restore RFT. The questions aimed at exploring restorative strategies commonly employed by Jordanian dentists when managing root filled teeth with extensive loss of tooth structure.
Results:
A minority of dentists consider direct resin restoration as the sole restoration for RFT with extensive loss of tooth structure. Full coverage metal-ceramic and all-ceramic crowns are more popular than endocrowns when restoring RFT with indirect restoration. Fiber posts are the most popular type of posts, followed by prefabricated metal posts. Glass ionomer is the most preferred cement for luting metal posts, while conventional dual resin cement with separate etch and rinse bonding strategy is the most employed when bonding fiber posts. The majority of dentists tend not to pretreat fiber posts. Loss of post/core retention or fracture of coronal tooth structure are the two most common reasons observed by dentists when RFT fail.
Conclusion:
Use of post and core is still preferred over more conservative approaches when restoring RFT with extensive loss of coronal tooth structure. Longevity of restorations can be enhanced by training practicing dentists on evidence-based adhesive strategies.
Collapse
|
18
|
Shafiei F, Memarpour M, Jowkar Z. Effect of Silver Antibacterial Agents on Bond Strength of Fiber Posts to Root Dentin. Braz Dent J 2020; 31:409-416. [PMID: 32901718 DOI: 10.1590/0103-6440202003300] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/28/2020] [Accepted: 04/20/2020] [Indexed: 11/22/2022] Open
Abstract
This study was conducted to evaluate whether antibacterial pretreatment irrigation with silver nanoparticles (SNPs) and silver diamine fluoride (SDF) has any effect on bond strength of fiber posts cemented with three types of resin cements in root canal space. Fifty-four endodontically treated maxillary central incisor roots were prepared for fiber post (FRC Postec Plus NO.3, Ivoclar Vivadent) cementation and divided into nine groups in terms of three cement types and two pretreatments with silver antibacterial agents. The cements were as follows: an etch-and-rinse cement (ER, Excite DSC/Variolink N), a self-etch cement (SE, ED Primer/Panavia F2.0), and a self-adhesive cement (SA, Panavia SA Luting Plus). For each cement, the control group was with no treatment and two experimental groups were with SNPs and SDF treatments that were used after acid-etching for ER cement and after EDTA treatment for SE and SA cements. After fiber post cementation, each bonded root was horizontally sectioned into 1-mm thickness microslices to create two slices for each root region (apical, middle and coronal) and underwent push-out bond strength (PBS) test. Data in MPa were analyzed with two-way ANOVA and Tukey test (p=0.05). The interaction of the pretreatment type and cement type was significant (p<0.001). SNPs and SDF significantly increased PBS with ER cement (p≤0.04). This positive effect was also marginally significant for SDF with SE cement (p=0.049). For SA cement, SNPs showed a significant positive effect, but SDF had a significant adverse effect on PBS (p<0.001). The effect of pretreatment with silver antibacterial agents prior to adhesive cementation of fiber posts depends on the resin cement used. Contrary to SNPs with beneficial or no significant effect on bonding for all cements, SDF exhibited a deleterious effect with self-adhesive cement.
Collapse
Affiliation(s)
- Fereshteh Shafiei
- Oral and Dental Disease Research Center, Department of Operative Dentistry, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Mahtab Memarpour
- Oral and Dental Disease Research Center, Department of Pediatric Dentistry, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Zahra Jowkar
- Oral and Dental Disease Research Center, Department of Operative Dentistry, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran
| |
Collapse
|
19
|
Peña Bengoa F, Magasich Arze MC, Macchiavello Noguera C, Moreira LFN, Kato AS, Bueno CEDS. Effect of ultrasonic cleaning on the bond strength of fiber posts in oval canals filled with a premixed bioceramic root canal sealer. Restor Dent Endod 2020; 45:e19. [PMID: 32483536 PMCID: PMC7239684 DOI: 10.5395/rde.2020.45.e19] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/07/2019] [Revised: 12/13/2019] [Accepted: 12/20/2019] [Indexed: 11/24/2022] Open
Abstract
Objective This study aimed to evaluate the effect of ultrasonic cleaning of the intracanal post space on the bond strength of fiber posts in oval canals filled with a premixed bioceramic (Bio-C Sealer [BIOC]) root canal sealer. Materials and Methods Fifty premolars were endodontically prepared and divided into 5 groups (n = 10), based on the type of root canal filling material used and the post space cleaning protocol. A1: gutta-percha + AH Plus (AHP) and post space preparation with ultrasonic cleaning, A2: gutta-percha + BIOC and post space preparation with ultrasonic cleaning, B1: gutta-percha + AHP and post space preparation, B2: gutta-percha + BIOC and post space preparation, C: control group. Fiber posts were cemented with a self-adhesive luting material, and 1 mm thick slices were sectioned from the middle and cervical third to evaluate the remaining filling material microscopically. The samples were subjected to a push-out test to analyze the bond strength of the fiber post, and the results were analyzed with the Shapiro-Wilk, Bonferroni, Kruskal-Wallis, and Mann-Whitney tests (p < 0.05). Failure modes were evaluated using optical microscopy. Results The results showed that the fiber posts cemented in canals sealed with BIOC had lower bond strength than those sealed with AHP. The ultrasonic cleaning of the post space improved the bond strength of fiber posts in canals sealed with AHP, but not with BIOC. Conclusions BIOC decreased the bond strength of fiber posts in oval canals, regardless of ultrasonic cleaning.
Collapse
Affiliation(s)
- Fernando Peña Bengoa
- Department of Endodontics, Faculty of Dentistry, Universidad Andres Bello, Viña del Mar, Chile
| | | | | | - Luiz Felipe Nunes Moreira
- Department of Endodontics, Faculty of Dentistry, Universidade Vale do Rio Doce, Governador Valadares, MG, Brazil
| | - Augusto Shoji Kato
- Faculdade São Leopoldo Mandic, Instituto de Pesquisas São Leopoldo Mandic, Área de Endodontia, Campinas, SP, Brazil
| | | |
Collapse
|
20
|
Wan S, Tan Y, Xie J, Huang X, Guo L. The effect of a root-dentin pretreatment technique combining PIPS with MTAD aiming to improve the bond strength of glass fiber post. Microsc Res Tech 2020; 83:824-833. [PMID: 32187772 DOI: 10.1002/jemt.23474] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/02/2020] [Revised: 02/16/2020] [Accepted: 03/08/2020] [Indexed: 11/07/2022]
Abstract
The aim of this study was to evaluate the combined effect of MTAD and photon-induced photoacoustic streaming (PIPS) technique on the smear layer removal and the bond strength of glass fiber post. Fifty-five human mandibular premolars were chosen. After root canal therapy and post space preparation, the teeth were equally divided to five groups according to the methods of root-dentin pretreatment: G1: distilled water (control); G2: 2.5% NaOCl+17% EDTA; G3: MTAD; G4: PIPS; G5: MTAD+PIPS. One sample was randomly selected from each group, and scanning electron microscope (SEM) was used to observe the microscopic morphology of the coronal, middle and apical level of the root-dentin. The remaining ten samples from each group were glued to glass fiber posts, and the bond strength was assessed by push-out test. SEM evaluation showed that the most complete smear layer removal was found in MTAD + PIPS group, especially in coronal third. Push-out test results exhibited that there was a statistically significant interaction between the experimental groups and root canal third (p < .0005). Significant differences could be found among five groups (p < .05): G5 > G4 > G3 > G2 > G1. G5 had the highest bond strength. In conclusion, post space pretreatments with MTAD or PIPS technique can significantly remove smear layer and improve the bond strength of glass fiber post, and combination of them works best.
Collapse
Affiliation(s)
- Shu Wan
- Department of prosthodontics, Hospital of Stomatology Affiliated to Southwest Medical University, LuZhou, China
| | - Yujie Tan
- Department of prosthodontics, Hospital of Stomatology Affiliated to Southwest Medical University, LuZhou, China
| | - Jing Xie
- Department of prosthodontics, Hospital of Stomatology Affiliated to Southwest Medical University, LuZhou, China
| | - Xiaoyu Huang
- Department of prosthodontics, Hospital of Stomatology Affiliated to Southwest Medical University, LuZhou, China
| | - Ling Guo
- Department of prosthodontics, Hospital of Stomatology Affiliated to Southwest Medical University, LuZhou, China
| |
Collapse
|
21
|
Borges CC, Palma-Dibb RG, Rodrigues FCC, Plotegher F, Rossi-Fedele G, de Sousa-Neto MD, Souza-Gabriel AE. The Effect of Diode and Er,Cr:YSGG Lasers on the Bond Strength of Fiber Posts. Photobiomodul Photomed Laser Surg 2019; 38:66-74. [PMID: 31393231 DOI: 10.1089/photob.2019.4668] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022] Open
Abstract
Background: Laser irradiation modifies the topography and composition of dentin surface aiming to increase the retention of bonded posts. Objective: To assess the effect of dentin irradiation with Er,Cr:YSGG or diode lasers on the bond strength of fiber posts using self-adhesive resin cement. Materials and methods: Sixty bovine root canals were root-canal treated, post spaces were prepared, and subsequently fiber posts were cemented. The samples were distributed according to the surface treatment: distilled water (control), Er,Cr:YSGG (1.5 W, 20 sec), or diode (1.5 W, 20 sec) lasers. Bond strengths were assessed by pull-out (n = 10) or push-out testing (n = 10). Pearson's correlation was calculated. Failure mode after testing and the depth of tags in the dentinal tubules were analyzed by confocal laser microscopy. Data were submitted to analysis of variance and Tukey's test. A p < 0.05 was considered significant. Results: In the push-out test, Er,Cr:YSGG laser had significantly different higher values (5.43 ± 0.10 MPa) compared to the control (4.79 ± 0.05 MPa). Diode laser values were not significantly different from the other groups (5.12 ± 0.27 MPa). In the pull-out test, there were no significant differences between Er,Cr:YSGG (6.86 ± 2.16 MPa) and diode (8.43 ± 1.77 MPa) lasers, and both had significant differences compared to the control (4.18 ± 1.29 MPa). No correlation was found. Adhesive failures were predominant in all groups, and no significant differences in tag penetration among the groups were found. Conclusions: The Er,Cr:YSGG laser increases the bond strength of resin cement and fiber post to dentin in both tests, compared to control group without laser treatment. Diode laser only enhanced bonding for pull-out test.
Collapse
Affiliation(s)
- Caroline Cristina Borges
- Department of Restorative Dentistry, School of Dentistry of Ribeirão Preto, University of São Paulo, Ribeirão Preto, Brazil
| | - Regina Guenka Palma-Dibb
- Department of Restorative Dentistry, School of Dentistry of Ribeirão Preto, University of São Paulo, Ribeirão Preto, Brazil
| | - Flávia Cássia Cabral Rodrigues
- Department of Restorative Dentistry, School of Dentistry of Ribeirão Preto, University of São Paulo, Ribeirão Preto, Brazil
| | - Fernanda Plotegher
- Department of Restorative Dentistry, School of Dentistry of Ribeirão Preto, University of São Paulo, Ribeirão Preto, Brazil
| | | | - Manoel Damião de Sousa-Neto
- Department of Restorative Dentistry, School of Dentistry of Ribeirão Preto, University of São Paulo, Ribeirão Preto, Brazil
| | | |
Collapse
|
22
|
Maletin A, Markovic D, Neskovic I, Ramic B, Veljovic T, Ristic I. Application of a Novel Modification of the Microbond Test for Evaluation of Adhesive Bond Strength Between Fiber Posts and Dual-Cure Dental Resin Cement. Med Sci Monit 2019; 25:3397-3405. [PMID: 31066356 PMCID: PMC6525573 DOI: 10.12659/msm.914151] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/16/2018] [Accepted: 01/24/2019] [Indexed: 11/10/2022] Open
Abstract
BACKGROUND While several tests can be used in the laboratory evaluation of composite resin-based cement materials, the push-out test remains the most prevalent. Due to difficulties in sample preparation, as well as a highly complex procedure, we attempted to develop an alternative method for testing the bond strength of dental resin cement materials. MATERIAL AND METHODS Ninety-six experimental samples of 2 dual-cure resin cements and 1 fiber post system were prepared for the 2 testing procedures: the push-out test and the modified Microbond test. The degree of monomer conversion was measured by Fourier-transform infrared spectroscopy. RESULTS The push-out test results indicated that the bond strength of dual-cure resin cement differs depending on the tooth root region to which it is applied (p<0.05), In addition, our findings show that Variolink II exhibits a much lower bond strength relative to RelyX ARC. These findings were confirmed by the modified Microbond test results. The monomer conversion rate results indicate average conversion rates of 85.81% and 61.35% for RelyX ARC and Variolnik II, respectively. CONCLUSIONS Our study confirms the practical utility of the modified Microbond test in the assessment of bond strength of dental cement resin-based materials. The proposed test method is particularly useful given that, relative to the push-out test, it requires a much smaller number of preparation and execution steps, thus reducing the potential for introducing errors, while increasing the reliability of the obtained findings.
Collapse
Affiliation(s)
- Aleksandra Maletin
- Department of Dentistry, Faculty of Medicine, University of Novi Sad, Novi Sad, Serbia
| | - Dubravka Markovic
- Department of Dentistry, Faculty of Medicine, University of Novi Sad, Novi Sad, Serbia
| | - Isidora Neskovic
- Department of Dentistry, Faculty of Medicine, University of Novi Sad, Novi Sad, Serbia
| | - Bojana Ramic
- Department of Dentistry, Faculty of Medicine, University of Novi Sad, Novi Sad, Serbia
| | - Tanja Veljovic
- Department of Dentistry, Faculty of Medicine, University of Novi Sad, Novi Sad, Serbia
| | - Ivan Ristic
- Department of Materials Engineering, Faculty of Technology, University of Novi Sad, Novi Sad, Serbia
| |
Collapse
|
23
|
Carvajal Trujillo EA. Irrigación del conducto radicular y tratamiento de superficie de pernos de fibra, previo a la cementación: revisión de tema. ACTA ODONTOLÓGICA COLOMBIANA 2019. [DOI: 10.15446/aoc.v9n1.76673] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022] Open
Abstract
Introducción: el tratamiento endodóntico es muy solicitado para preservar las piezas dentales, así como la utilización de pernos de fibra cuando el remanente coronario no es el adecuado para recibir una prótesis coronaria, permitiendo de esta manera reconstruir el muñón dental para la posterior colocación de la restauración definitiva. Objetivo: identificar tanto el tratamiento de superficie de pernos de fibra como el irrigante radicular idóneos para conseguir una cementación adecuada; así como conocer cuál es el tratamiento de superficie que produce menos desintegración de las fibras del perno de fibra. Materiales y métodos: se incluyeron 47 artículos publicados en inglés, durante los últimos 20 años, teniendo en cuenta que los mismos se obtuvieron hasta octubre del 2018. Conclusiones: previa la cementación de pernos sean estos de fibra o de cuarzo es indispensable realizar tratamiento de superficie para así mejorar la adhesión, estos pueden ser químicos o físicos, los que ofrecen mejor resultado sin alterar de manera significativa la estructura del mismo es el enarenado con partículas de diamante sintéticas de 1-3 µm seguido de silanización y dentro de los químicos H2O2 al 10% por 1 min seguido de silano. Para obtener mejores resultados se debe accionar el silano a una temperatura de 80°C. En cuanto a protocolos de irrigación depende del sistema de cementación que se vaya a emplear EDTA 18% + Hipoclorito de sodio al 5,25% o EDTA 18% + clorhexidina al 2% cuando se va emplear un cemento autoadhesivoy NaOCl al 11% cuando se utilice el acondicionamiento ácido de lavado y secado.
Collapse
|
24
|
CONTE T, ANDRADE GSD, GADONSKI AP, SANTIN DC, NAUFEL FS. Evaluation of the effect of chlorhexidine and sodium hypochlorite in adhesive cementation of fiber posts - in vitro study. REVISTA DE ODONTOLOGIA DA UNESP 2019. [DOI: 10.1590/1807-2577.02019] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022] Open
Abstract
Abstract Introduction The attachment of fiberglass posts is achieved through an adhesive process. Failures in adhesion may occur due to the hydrolytic degradation of the adhesives, or to the degradation of the collagen fibres of the hybrid layer by intrinsic enzymes. Objective To evaluate the effect of chlorhexidine and sodium hypochlorite treatment on bond strength to dentin. Material and method Thirty bovine roots were randomly distributed into 3 groups (n=10): a) Control, b) 2% Chlorhexidine, and c) 5% Sodium Hypochlorite. Next, RelyX® ARC resin cement was used to cement the post. Each specimen resulted in samples from the three root thirds that were submitted to the pushout test (MPa) at 24 hours and 12 months. Bond strength values were analysed using the Kolmogorov-Smirnov, 3-way ANOVA and Tukey tests. The fracture mode of the pin was also analysed using stereomicroscopy. Result There were no significant differences between treatments at the immediate time (p=0.0644) or in the interaction of factors (p=0.1935). After one year, the experimental groups showed no significant differences in bond strength in relation to the control group, with the exception of the cervical third of the chlorohexidine group in which there was a significant loss of adhesion. As for the fracture mode, there was a predominance of the mixed type in all groups and thirds. Conclusion The use of chlorhexidine or hypochlorite provides neither benefits nor losses in the adhesive bond strength of fiberglass posts. However, there is an influence of the root thirds, with the worst bond strength in the apical third.
Collapse
Affiliation(s)
- Tainara CONTE
- UNIOESTE – Universidade Estadual do Oeste do Paraná, Brasil
| | | | | | | | | |
Collapse
|
25
|
Ramos ATPR, Belizário LG, Jordão-Basso KCF, Shinohara AL, Kuga MC. Effects of photodynamic therapy on the adhesive interface using two fiber posts cementation systems. Photodiagnosis Photodyn Ther 2018; 24:136-141. [DOI: 10.1016/j.pdpdt.2018.08.017] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/18/2018] [Revised: 08/13/2018] [Accepted: 08/27/2018] [Indexed: 12/28/2022]
|
26
|
Effects of Endodontic Sealers and Irrigation Systems on Smear Layer Removal after Post Space Preparation. J Endod 2018; 44:1293-1297. [DOI: 10.1016/j.joen.2018.05.014] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/15/2018] [Revised: 05/04/2018] [Accepted: 05/19/2018] [Indexed: 11/18/2022]
|
27
|
Garcia PP, da Costa RG, Garcia AV, Gonzaga CC, da Cunha LF, Rezende CEE, Correr GM. Effect of surface treatments on the bond strength of CAD/CAM fiberglass posts. J Clin Exp Dent 2018; 10:e591-e597. [PMID: 29930778 PMCID: PMC6005091 DOI: 10.4317/jced.54904] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/06/2018] [Accepted: 04/26/2018] [Indexed: 11/25/2022] Open
Abstract
Background There is no ideal protocol for the surface treatment of fiber posts, especially when using a computer-aided design/computer-aided manufacturing (CAD/CAM) experimental fiberglass block. The purpose of this study was to evaluate the bond strength of a CAD/CAM customized glass fiber post and core after applying different surface treatment techniques. Material and Methods Forty premolars were prepared to receive a customized CAD/CAM glass-fiber post and core obtained from an experimental block of glass fiber and epoxy resin. The specimens were randomly distributed in 4 groups (n=10) according to the post and core surface treatment: ETH - 70% ethanol; HP - 24% hydrogen peroxide for 1 minute; ETH/S - 70% ethanol + silane; HP/S - 24% hydrogen peroxide + silane. The universal adhesive containing silane was applied on the posts and prepared post spaces in all groups. The posts were cemented using dual cure resin cement. The specimens were stored in distilled water at 37°C for 24 h, cut (two slices of 1 mm for each root third - coronal, middle, and apical) and subjected to push-out test (0.5 mm/min). Data was subjected to two-way ANOVA (surface treatment and root third) and Tukey’s test (α=0,05). Results There was no significant difference of bond strength values among groups, regardless the surface treatment (p >0.05). There was significant difference on bond strength values for the different root thirds (p<0.05) (coronal>middle=apical). Conclusions The different surface treatment and application of additional silane in the CAD/CAM customized glass-fiber post and core does not interfere on bond strength values. The root dentin third interfered on the bond strength, with higher values for the coronal third. Key words:Post and core technique, cad/cam, shear strength, hydrogen peroxide.
Collapse
Affiliation(s)
- Paula-Pontes Garcia
- Graduate Student, Graduate Program in Dentistry, Universidade Positivo, Rua Pedro Viriato Parigot de Souza, 5300, Curitiba, PR, Brazil
| | - Rogério-Goulart da Costa
- Professor, Dental Prosthesis, Federal Institute for Science and Technology of Paraná, Rua João Negrão 1258, Curitiba, PR, Brazil
| | - André-Vivan Garcia
- Graduate Student, Graduate Program in Dentistry, Universidade Positivo, Rua Pedro Viriato Parigot de Souza, 5300, Curitiba, PR, Brazil
| | - Carla-Castiglia Gonzaga
- PhD Professor, Graduate Program in Dentistry, Universidade Positivo, Rua Pedro Viriato Parigot de Souza, 5300, Curitiba, PR, Brazil
| | - Leonardo-Fernandes da Cunha
- PhD Professor, Graduate Program in Dentistry, Universidade Positivo, Rua Pedro Viriato Parigot de Souza, 5300, Curitiba, PR, Brazil
| | - Carlos-Eduardo-Edwards Rezende
- PhD Professor, Graduate Program in Dentistry, Universidade Positivo, Rua Pedro Viriato Parigot de Souza, 5300, Curitiba, PR, Brazil
| | - Gisele-Maria Correr
- PhD Professor, Graduate Program in Dentistry, Universidade Positivo, Rua Pedro Viriato Parigot de Souza, 5300, Curitiba, PR, Brazil
| |
Collapse
|
28
|
Shafiei F, Mohammadparast P, Jowkar Z. Adhesion performance of a universal adhesive in the root canal: Effect of etch-and-rinse vs. self-etch mode. PLoS One 2018; 13:e0195367. [PMID: 29630636 PMCID: PMC5891019 DOI: 10.1371/journal.pone.0195367] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/01/2017] [Accepted: 03/16/2018] [Indexed: 11/19/2022] Open
Abstract
PURPOSE Universal adhesives are new systems that can be used in etch-and-rinse (ER) and self-etch (SE) modes. This in vitro study evaluated the bonding performance of a universal adhesive in ER mode and SE mode with two irrigants for luting fiber posts in the root canal. MATERIALS AND METHODS After separation of the roots from the crowns of 56 maxillary central incisors and endodontic treatment, 10-mm post space was prepared. The roots were divided into seven groups according to irrigant/adhesive protocol used for cementation of posts: 1) sodium hypochlorite (NaOCl) irrigant + acid etching + One-Step Plus, 2) NaOCl + Clearfil SE Bond (CSE) and 3) EDTA + CSE as controls; 4) NaOCl + All-Bond Universal (AB) in ER mode, 5) NaOCl + AB in SE mode, 6) EDTA + AB in SE mode, 7) distilled water + AB in SE mode. Posts were luted using Duo-link. The bonded roots were sectioned into microslices. After push-out bond strength (PBS) testing, data in MPa were analyzed with two-way ANOVA and Tukey test (α = 0.05). RESULTS PBS was significantly affected by irrigation/adhesive protocol and root region (P<0.05), with no significant interaction of these factors. PBS of ABU in ER mode with NaOCl and in SE mode with NaOCl or EDTA was comparable to that in the respective controls. The highest and lowest PBSs were recorded for ABU in the SE mode with EDTA (15.38 ± 4) and NaOCl (10.17 ± 3.5), respectively. PBS of AB in ER and SE modes was similar when distilled water was used in the SE mode. CONCLUSION Adhesive performance of AB in the ER mode was comparable to or different from the SE mode, depending on the irrigant used to prepare post space in SE approach. AB could behave as a reliable bonding for post cementation.
Collapse
Affiliation(s)
- Fereshteh Shafiei
- Oral and Dental Disease Research Center, Department of Operative Dentistry, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Pourya Mohammadparast
- Department of Operative Dentistry, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Zahra Jowkar
- Department of Operative Dentistry, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran
- * E-mail:
| |
Collapse
|
29
|
Oliveira LV, Maia TS, Zancopé K, Menezes MDS, Soares CJ, Moura CCG. Can intra-radicular cleaning protocols increase the retention of fiberglass posts? A systematic review. Braz Oral Res 2018; 32:e16. [PMID: 29561949 DOI: 10.1590/1807-3107bor-2018.vol32.0016] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/17/2017] [Accepted: 01/30/2018] [Indexed: 11/22/2022] Open
Abstract
The presence of residues within the root canal after post-space preparation can influence the bond strength between resin cement and root dentin when using fiberglass posts (FGPs). Currently, there is no consensus in the literature regarding what is the best solution for the removal of debris after post-space preparation. This systematic review involved "in vitro" studies to investigate if cleaning methods of the root canal after post-space preparation can increase the retention of FGPs evaluated by the push-out test. Searches were carried out in PubMed (MEDLINE) and Scopus databases up to July2017. English language studies published from 2007 to July 2017 were selected. 475 studies were found, and 9 were included in this review. Information from the 9 studies were collected regarding the number of samples, storage method after extraction, root canal preparation, method of post-space preparation, endodontic sealer, resin cement, cleaning methods after post-space and presence of irrigant activation. Five studies presented the best results for the association of sodium hypochlorite (NaOCl) and ethylenediamine tetra-acetic acid (EDTA), while in the other 4 studies, the solutions that showed improved retention of FGPs were photon-induced photoacoustic streaming (PIPS), Qmix, Sikko and EDTA. The results showed heterogeneity in all comparisons due to a high variety of information about cleaning methods, different concentrations, application time, type of adhesive system and resin cements used. In conclusion, this review suggests that the use of NaOCl/EDTA results in the retention of FGPs and may thus be recommended as a post-space cleaning method influencing the luting procedure.
Collapse
Affiliation(s)
- Lilian Vieira Oliveira
- Universidade Federal de Uberlândia - UFU, School of Dentistry, Department of Endodontics, Uberlândia, MG, Brazil
| | - Thais Souza Maia
- Universidade Federal de Uberlândia - UFU, School of Dentistry, Department of Operative Dentistry and Dental Materials, Uberlândia, MG, Brazil
| | - Karla Zancopé
- Universidade Federal de Uberlândia - UFU, School of Dentistry, Department of Occlusion, Fixed Prostheses, and Dental Materials, Uberlândia, MG, Brazil
| | - Murilo de Souza Menezes
- Universidade Federal de Uberlândia - UFU, School of Dentistry, Department of Operative Dentistry and Dental Materials, Uberlândia, MG, Brazil
| | - Carlos José Soares
- Universidade Federal de Uberlândia - UFU, School of Dentistry, Department of Operative Dentistry and Dental Materials, Uberlândia, MG, Brazil
| | | |
Collapse
|
30
|
Ramos ATPR, Garcia Belizário L, Venção AC, Fagundes Jordão-Basso KC, de Souza Rastelli AN, de Andrade MF, Kuga MC. Effects of Photodynamic Therapy on the Adhesive Interface of Fiber Posts Cementation Protocols. J Endod 2018; 44:173-178. [DOI: 10.1016/j.joen.2017.08.035] [Citation(s) in RCA: 20] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/17/2017] [Revised: 08/08/2017] [Accepted: 08/28/2017] [Indexed: 12/27/2022]
|
31
|
Shafiei F, Memarpour M, Vafamand N, Mohammadi M. Effect of antibacterial/adhesive approaches on bonding durability of fiber posts cemented with self-etch resin cement. J Clin Exp Dent 2017; 9:e1096-e1102. [PMID: 29075411 PMCID: PMC5650211 DOI: 10.4317/jced.53992] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/28/2017] [Accepted: 08/09/2017] [Indexed: 11/05/2022] Open
Abstract
BACKGROUND Longevity of post-retained restoration is highly depended on bonding stability of fiber post (FP) to root dentin. This study evaluated the effect of different antibacterial/adhesive approaches on bonding durability of FPs luted into root canal with a self-etch cement. MATERIAL AND METHODS Seventy-two human maxillary central incisor roots were divided into six groups after endodontic treatment, based on the antibacterial/adhesive treatments as follows: 1)ED primer II (ED, control); 2) Clearfil Protect Bond (PB); 3) 2% chlorhexidine (CH) pretreatment + ED primer II (CH+ED); 4) CH-incorporated into ED primer II (CH in ED); 5) CH pretreatment + Clearfil SE Bond (CH+SE); and 6)CH-incorporated into SE primer (CH in SE). The FPs were then cemented using PanaviaF2.0. After micro-slicing the bonded root dentin, a push-out bond strength (PBS) test was performed immediately or after two years of water storage. Data were analyzed using ANOVA and post hoc Tukey tests (α=0.05). RESULTS The effects of antibacterial/adhesive approach, time and interaction between the main factors were significant (p=0.01). There was no significant difference between the immediate groups, except between the CH+ED group (the lowest PBS) and PB and CH in SE groups (the highest PBS) (p≤0.03). After aging, the same difference was observed (p≤0.02); the control group exhibited a significantly lower PBS compared to the other groups (p≤0.01), except for CH+ED. Aging significantly decreased PBS of all the groups (p≤0.01); the control group exhibited the highest reduction. CONCLUSIONS CH incorporated into self-etch primers or in pretreatment step prior to two-step self-etch adhesive and antibacterial adhesive could improve bond stability of self-etch cemented fiber post. However, none of these was capable of inhibiting bond degradation over time. Key words:Push-out bond strength, Fiber post, Chlorhexidine.
Collapse
Affiliation(s)
- Fereshteh Shafiei
- DMD, MScD, Professor, Oral and Dental Disease Research Center, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Mahtab Memarpour
- DMD, MScD, Professor, Oral and Dental Disease Research Center, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Narges Vafamand
- DDS, Dentist, Department of Operative Dentistry, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Mahsa Mohammadi
- DDS, Dentist, Department of Operative Dentistry, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran
| |
Collapse
|
32
|
Mirseifinejad R, Tabrizizade M, Davari A, Mehravar F. Efficacy of Different Root Canal Irrigants on Smear Layer Removal after Post Space Preparation: A Scanning Electron Microscopy Evaluation. IRANIAN ENDODONTIC JOURNAL 2017; 12:185-190. [PMID: 28512483 PMCID: PMC5431723 DOI: 10.22037/iej.2017.36] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Key Words] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Introduction: Effective durable adhesion between post material and dentine using resin cements is essential for longevity of restoration. The aim of this in vitro study was to compare the effect of different irrigants on smear layer removal after post space preparation. Methods and Materials: A total of 75 extracted anterior human teeth were selected. The canals were instrumented by rotary system and then were filled. After preparing the post space, teeth were divided into 5 groups according to irrigants: 17% EDTA; 17% EDTA+2% CHX; 5.25% NaOCl; 17% EDTA+5.25% NaOCl; and saline. The canals were irrigated with 5 cc of each irrigants for 1 min. Specimens were examined with scanning electron microscopy (SEM). Hulsmann’s score was used for marking of smear layer removal at coronal, middle and apical thirds of post space. The data were analyzed using the Kruskal-Wallis and Mann-Whitney U tests. Results: The results revealed that subsequent use of 17% EDTA+5.25% NaOCl was more effective than the other groups in smear layer removal. No statistical difference was found among different levels of root canal within each group. Conclusion: It can be concluded that 17% EDTA+5.25% NaOCl could be an effective irrigant for smear layer removal after post space preparation.
Collapse
Affiliation(s)
- Rahele Mirseifinejad
- Operative Dentistry Department, Dental School, University of Shahid Sadughi, Yazd, Iran
| | - Mehdi Tabrizizade
- Department of Endodontics, Dental School, University of Shahid Sadughi, Yazd, Iran
| | - Abdolrahim Davari
- Operative Dentistry Department, Dental School, University of Shahid Sadughi, Yazd, Iran
| | - Fateme Mehravar
- Student, Dental School, University of Shahid Sadughi Yazd, Yazd, Iran
| |
Collapse
|
33
|
Abreu JLBD, Prado M, Simão RA, Silva EMD, Dias KRHC. Effect of Non-Thermal Argon Plasma on Bond Strength of a Self-Etch Adhesive System to NaOCl-Treated Dentin. Braz Dent J 2017; 27:446-51. [PMID: 27652709 DOI: 10.1590/0103-6440201600914] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/18/2016] [Accepted: 05/20/2016] [Indexed: 11/22/2022] Open
Abstract
Studies have been showing a decrease of bond strength in dentin treated with sodium hypochlorite (NaOCl). The aim of this study was to evaluate the effect of non-thermal argon plasma on the bond strength of a self-etch adhesive system to dentin exposed to NaOCl. Thirty-two flat dentin surfaces of bovine incisors were immersed in 2.5% NaOCl for 30 min to simulate the irrigation step during endodontic treatment. The specimens were divided into four groups (n=8), according to the surface treatment: Control (without plasma treatment), AR15 (argon plasma for 15 s), AR30 (argon plasma for 30 s) and AR45 (argon plasma for 45 s). For microtensile bond strength test, 5 specimens were used per group. In each group, the specimens were hybridized with a self-etch adhesive system (Clearfil SE Bond) and resin composite buildups were constructed. After 48 h of water storage, specimens were sectioned into sticks (5 per tooth, 25 per group) and subjected to microtensile bond strength test (μTBS) until failure, evaluating failure mode. Three specimens per group were analyzed under FTIR spectroscopy to verify the chemical modifications produced in dentin. μTBS data were analyzed using ANOVA and Tamhane tests (p<0.05). AR30 showed the highest μTBS (20.86±9.0). AR15 (13.81±6.4) and AR45 (11.51±6.8) were statistically similar to control (13.67±8.1). FTIR spectroscopy showed that argon plasma treatment produced chemical modifications in dentin. In conclusion, non-thermal argon plasma treatment for 30 s produced chemical changes in dentin and improved the μTBs of Clearfil SE Bond to NaOCl-treated dentin.
Collapse
Affiliation(s)
| | - Maíra Prado
- Department of Dental Clinic, Dental School, UFRJ - Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ, Brazil.,Department of Dental Clinic, Dental School, UFRJ - Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ, Brazil
| | - Renata Antoun Simão
- Laboratory of Polymer and Asphalt Surfaces, School of Metallurgical and Materials Engineering, UFRJ - Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ, Brazil
| | - Eduardo Moreira da Silva
- Analytical Laboratory of Restorative Biomaterials, Dental School, UFF - Universidade Federal Fluminense, Niterói, RJ, Brazil
| | | |
Collapse
|
34
|
De-Deus G, BrandÓo MC, Souza EM, Reis C, Reis K, Machado R, Neelakantan P. Epoxy Resin-Based Root Canal Sealer Penetration into Dentin Tubules Does not Improve Root Filling Dislodgement Resistance. Eur Endod J 2017; 2:1-5. [PMID: 33403329 PMCID: PMC7757946 DOI: 10.5152/eej.2017.16059] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/18/2016] [Revised: 12/14/2016] [Accepted: 12/29/2016] [Indexed: 11/22/2022] Open
Abstract
Objective: This study sought to evaluate the effect of the penetration of an epoxy resin-based root canal sealer into dentin tubules on the force required to dislodge the root canal filling. Methods: Sixty extracted human central incisors with single canals were decoronated, instrumented, and filled with gutta-percha and AH Plus sealer labeled with 0.1% rhodamine B dye. The roots were further sectioned horizontally at 3, 6, and 8 mm from the apex. The coronal surfaces of the resulting 180 slices were evaluated using confocal laser scanning microscopy to measure the amount of sealer that penetrated into the dentin tubules. To quantify the force required to dislocate the root filling material, the root fillings of the slices were subjected to a dislodgement resistance test (push-out). Spearman’s rho correlation test was further used to test the correlation between the push-out bond strength and sealer penetration into the dentin tubules (P<0.05). Results: No significant correlation was observed between sealer penetration into the dentin tubules and the force required to dislodge the root canal filling (P=0.626). Conclusion: Following the results of this study, the penetrating ability of the AH Plus sealer into dentin tubules has no correlation with the force required to dislodge the root canal filling.
Collapse
Affiliation(s)
- Gustavo De-Deus
- Department of Endodontics, Fluminense Federal University, Rio de Janeiro, Brazil
| | | | | | - Claudia Reis
- Department of Dental Clinic, Federal University of Espirito Santo, Espirito Santo, Brazil
| | - Kátia Reis
- Department of Prosthodontics and Dental Materials, Federal University of Rio de Janeiro, Rio de Janeiro, Brazil
| | - Ricardo Machado
- Clinical Practice Limited to Endodontics, Navegantes, Brazil
| | | |
Collapse
|
35
|
Prado MC, Leal F, Gusman H, Simão RA, Prado M. Effects of auxiliary device use on smear layer removal. J Oral Sci 2016; 58:561-567. [PMID: 28025441 DOI: 10.2334/josnusd.16-0216] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/01/2022]
Abstract
This study evaluated the effects of different auxiliary irrigation devices on smear layer removal with a chelating solution (QMix). Fifty single-rooted permanent human teeth were shaped with a sequence of nickel-titanium instruments. A 2% chlorhexidine gel was used as a chemical auxiliary substance during preparation. Samples were assigned to five groups (n = 10 each) according to final irrigation protocol, namely, distilled water (control group), QMix 1 min, QMix + passive ultrasonic irrigation (PUI), QMix + plastic endodontic finishing file (EC), and QMix 3 min. Teeth were prepared and evaluated by scanning electron microscopy, and three photomicrographs (magnification, 1,000×) were obtained for each root third. Two blinded and precalibrated evaluators analyzed and scored the images, and the data were statistically analyzed by the Kruskal-Wallis and Dunn tests (P < 0.05). Groups were ranked according to the extent of smear layer removal. The total area of the root canal walls and apical root thirds was calculated, and the groups ranked PUI > EC = QMix 3 min > QMix 1 min > control. QMix 1 min was effective for smear layer removal only when used with auxiliary devices, and QMix + passive ultrasonic irrigation yielded the best results, particularly for the apical third.(J Oral Sci 58, 561-567, 2016).
Collapse
Affiliation(s)
- Marina C Prado
- Proclin Department, School of Dentistry, Rio de Janeiro State University
| | | | | | | | | |
Collapse
|
36
|
A novel anatomical short glass fiber reinforced post in an endodontically treated premolar mechanical resistance evaluation using acoustic emission under fatigue testing. J Mech Behav Biomed Mater 2016; 65:151-159. [PMID: 27572232 DOI: 10.1016/j.jmbbm.2016.08.018] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/05/2016] [Revised: 08/05/2016] [Accepted: 08/08/2016] [Indexed: 11/20/2022]
Abstract
This study evaluates the fracture resistance in an endodontically treated tooth using circular fiber-reinforced composite (FRC) and innovated anatomical short glass fiber reinforced (SGFR) posts under fatigue testing, monitored using the acoustic emission (AE) technique. An anatomical SGFR fiber post with an oval shape and slot/notch design was manufactured using an injection-molding machine. Crown/core maxillary second premolar restorations were executed using the anatomical SGFR and commercial cylindrical fiber posts under fatigue test to understand the mechanical resistances. The load versus AE signals in the fracture and fatigue tests were recorded to evaluate the restored tooth failure resistance. The static fracture resistance results showed that teeth restored using the anatomical SGFR post presented higher resistance than teeth restored using the commercial FRC post. The fatigue test endurance limitation (1.2×106 cycles) was 207.1N for the anatomical SGFR fiber post, higher than the 185.3N found with the commercial FRC post. The average accumulated number of AE signals and corresponding micro cracks for the anatomical SGFR fiber post (153.0 hits and 2.44 cracks) were significantly lower than those for the commercial FRC post (194.7 hits and 4.78 cracks) under 40% of the static maximum resistance fatigue test load (pass 1.2×106 cycles). This study concluded that the anatomical SGFR fiber post with surface slot/notch design made using precise injection molding presented superior static fracture resistance and fatigue endurance limitation than those for the commercial FRC post in an endodontically treated premolar.
Collapse
|
37
|
Shafiei F, Yousefipour B, Mohammadi-Bassir M. Effect of Carbodiimide on Bonding Durability of Adhesive-cemented Fiber Posts in Root Canals. Oper Dent 2016; 41:432-40. [PMID: 26794191 DOI: 10.2341/15-099-l] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
This study was undertaken to investigate whether using a protein cross-linker, 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC), improves bonding stability of fiber posts to root dentin using three resin cements. Sixty human maxillary central incisor roots were randomly divided into six groups after endodontic treatment, according to the cements used with and without EDC pretreatment. In the etch-and-rinse group, 0.3 M EDC aqueous solution was applied on acid-etched root dentin prior to Excite DSC/Variolink II for post cementation. In the self-etch and self-adhesive groups, EDC was used on EDTA-conditioned root space prior to application of ED Primer II/Panavia F2.0 and Clearfil SA, respectively. After microslicing the root dentin, a push-out bond strength (BS) test was performed immediately or after one-year of water storage for each group. Data were analyzed using three-way analysis of variance and Tukey tests (α=0.05). A significant effect of cement type, time, EDC, and Time × Cement and Time × EDC interactions were observed (p≤0.001). EDC pretreatment did not affect immediate bonding of the three cements (p>0.05). Aging significantly reduced the BS in all the groups (p≤0.001), but EDC groups exhibited a higher BS compared with the respective control groups (p<0.001). Despite the significant effect of aging on decreasing the BS of fiber post to radicular dentin, EDC could diminish this effect for the three tested cements.
Collapse
|
38
|
Fracture resistance of endodontically treated roots with oval canals restored with oval and circular posts. J Endod 2014; 41:539-43. [PMID: 25498127 DOI: 10.1016/j.joen.2014.11.009] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/11/2014] [Revised: 11/01/2014] [Accepted: 11/08/2014] [Indexed: 11/22/2022]
Abstract
INTRODUCTION The aim of the present study was to evaluate the effects of post space preparations with circular and oval post drills and the placement of oval and circular posts on the fracture strength of roots with oval canals. METHODS Seventy mandibular premolars with oval root canals were decoronated. Fourteen teeth were used as a control group (group 1), and the root canals of the remaining teeth were prepared up to size #30. The root canals were filled, and the samples were randomly divided into 4 experimental groups as follows: post space preparation with circular-shaped drills (group 2), post space preparation with oval-shaped drills (group 3), circular post placement (group 4), and oval post placement (group 5). A fracture strength test was performed on each specimen, and the data were statistically evaluated using 1-way analysis of variance and Tukey post hoc tests. RESULTS The fracture strengths of the circular posts-placed group were higher than those of the oval post-placed group (P < .001). The post space preparation using oval-shaped drills significantly decreased the fracture strength of the roots compared with the control group (P < .001). CONCLUSIONS Within the limitations of the present study, oval posts did not provide a higher fracture resistance to endodontically treated roots with oval canals compared with circular posts. Therefore, clinicians should be aware that oval posts are similar to circular posts in terms of enhancing the fracture resistance of roots with oval canals.
Collapse
|