A Microfluidics-based Pulpal Arteriole Blood Flow Phantom for Validation of Doppler Ultrasound Devices in Pulpal Blood Flow Velocity Measurement

Superficial Bifurcated Microflow Phantom for High-Frequency Ultrasound Applications

OBJECTIVE

To evaluate and optimize high-frequency ultrasound (HFUS) imaging techniques that visualize the morphology of microscale vasculatures, many studies have used flow phantoms with straight channels. However, the previous phantoms lack the complexity of microvessels to simulate a realistic vascular environment in a shallow depth. This study was aimed at devising a new protocol for fabrication of a microflow phantom with bifurcated geometry at a superficial region.

METHODS

The proposed protocol involved the following features: (i) a bifurcated flow tract model 300 µm in diameter was debossed on the surface of a tissue slab made of polyvinyl alcohol cryogel, and (ii) a wall-less lumen was created via bonding tissue slabs to put a lid on the debossed flow tract. The structure of the created microflow phantom was evaluated using 2-D and 3-D power Doppler imaging with a 30 MHz HFUS modality.

RESULTS

Ultrasound imaging revealed that the desired flow tract with bifurcation was successfully created in the phantom at a depth of 2-5 mm from the ultrasound probe. The diameters of the flow tract measured in the axial direction were 307 ± 3.7 µm in the parent branch and 232 ± 18.2 and 256 ± 23.3 µm in the two daughter branches, respectively.

CONCLUSION

The experiments revealed that the proposed protocol for creating a microscale intricate flow tract with desired dimensions and depth is valid. This new phantom will facilitate further improvement in the ultrasound technologies for the precise visualization of superficial complex vasculatures such as those in skin layers.

Overview of Ultrasound in Dentistry for Advancing Research Methodology and Patient Care Quality with Emphasis on Periodontal/Peri-implant Applications

BACKGROUND

Ultrasound is a non-invasive, cross-sectional imaging technique emerging in dentistry. It is an adjunct tool for diagnosing pathologies in the oral cavity that overcomes some limitations of current methodologies, including direct clinical examination, 2D radiographs, and cone beam computerized tomography. Increasing demand for soft tissue imaging has led to continuous improvements on transducer miniaturization and spatial resolution. The aims of this study are (1) to create a comprehensive overview of the current literature of ultrasonic imaging relating to dentistry, and (2) to provide a view onto investigations with immediate, intermediate, and long-term impact in periodontology and implantology.

METHODS

A rapid literature review was performed using two broad searches conducted in the PubMed database, yielding 576 and 757 citations, respectively. A rating was established within a citation software (EndNote) using a 5-star classification. The broad search with 757 citations allowed for high sensitivity whereas the subsequent rating added specificity.

RESULTS

A critical review of the clinical applications of ultrasound in dentistry was provided with a focus on applications in periodontology and implantology. The role of ultrasound as a developing dental diagnostic tool was reviewed. Specific uses such as soft and hard tissue imaging, longitudinal monitoring, as well as anatomic and physiological evaluation were discussed.

CONCLUSIONS

Future efforts should be directed towards the transition of ultrasonography from a research tool to a clinical tool. Moreover, a dedicated effort is needed to introduce ultrasonic imaging to dental education and the dental community to ultimately improve the quality of patient care.

A laboratory study to detect simulated pulpal blood flow in extracted human teeth using ultrasound Doppler flowmetry

AIM

To develop a laboratory-based tooth model of simulated blood flow in teeth and evaluate it using ultrasound Doppler flowmetry (UDF).

METHODOLOGY

A laboratory-based tooth model for UDF was created based on a microfluidic experimental model proposed by Kim & Park (2016 a,b). Twenty-one maxillary or mandibular anterior human teeth within 1 month of extraction were used. Four holes were made in each tooth to fit 1.6-mm diameter polytetrafluoroethylene (PTFE) tubes: at the apical foramen, palatal surface in the centre of the crown, palatal surface apical to the cementoenamel junction (CEJ) and the root centre. Fluid mimicking pulsating blood was pumped (pressure range: 0-200 mbar, flow rate range: 0-80 μL min^-1 ) into the apical foramen via the PTFE tubes, which exited the tooth through the palatal surface in the centre of the crown (control group), palatal surface below the CEJ (group 1) and the palatal surface at the mid-root level (group 2). An UDF transducer of 20 MHz was placed at a 60° angle to the labial surface of tooth and was used to measure the fluid flow velocity (Vs, Vas, Vm, Vam, Vd, Vad and Vakd). The flow velocity of the different groups was compared using the Wilcoxon signed-rank test, with a 95% confidence level.

RESULTS

UDF facilitated the detection of the simulated pulpal blood flow in the control group and group 1, but not in group 2. The mean and standard deviations of Vas, Vam and Vakd were 0.921 ± 0.394, 0.479 ± 0.208 and 0.396 ± 0.220 cm s^-1 , respectively, in the control group, and 0.865 ± 0.368, 0.424 ± 0.215 and 0.487 ± 0.279 cm s^-1 , respectively, in group 1. The pulpal blood flow values of the control group and group 1 were not significantly different (p > 0.05).

CONCLUSIONS

This laboratory study revealed that ultrasound Doppler flowmetry enabled the detection of simulated blood flow below the level of the CEJ but not at the mid-root level.

A Novel Microflow Phantom Dedicated to Ultrasound Microvascular Measurements

Tumor microvascularization is a biomarker of response to antiangiogenic treatments and is accurately assessed by ultrasound imaging. Imaging modes used to visualize slow flows include Power Doppler imaging, dynamic contrast-enhanced ultrasonography, and more recently, microvascular Doppler. Flow phantoms are used to evaluate the performance of Doppler imaging techniques, but they do not have a steady flow and sufficiently small channels. We report a novel device for robust and stable microflow measurements and the study of the microvascularization. Based on microfluidics technology, the prototype features wall-less cylindrical channels of diameters ranging from as small as 147 up to 436 µm, cast in a soft silicone polymer and perfused via a microfluidic flow pressure controller. The device was assessed using flow rates from 49 to 146 µL/min, with less than 1% coefficient of variation over three minutes, corresponding to velocities of 6 to 142 mm/s. This enabled us to evaluate and confirm the reliability of the Superb Microvascular Imaging Doppler mode compared with the Power Doppler mode at these flow rates in the presence of vibrations mimicking physiological motion.