Caffeic Acid-coated Nanolayer on Mineral Trioxide Aggregate Potentiates the Host Immune Responses, Angiogenesis, and Odontogenesis

Finely controlled bioceramic granules and sonoporation for osteogenic bone defect repair and reconstruction

Osteoporotic fractures caused by imbalance in bone homeostasis like chemotherapy, loss of ovarian function，glucocorticoid use and aging require special surgical procedure to treat and restore anatomical function. However, due to escalating bone weakness and impairment, it remains a clinical challenge to treat these types of fracture defects through conventional means. Herein, we fabricated a novel calcium silicate‑strontium (CS-Sr35) bioceramic granules with high biological properties and combined it with ultrasound aided sonoporation (sono) in augmenting osteoporotic critical-sized bone defect. The use of sonoporation mediated by microbubble was to influence efficient response for tissue permeability and delivery of bioactive ions from the bioceramic scaffold. The graded robust granule with adjustable microstructure exhibited physiochemical and biointegration properties favorable for ion release in vitro and osteogenic related activities in vivo. Herein, we compared the treatment of bone defect repair using (i) no scaffold (ii) CS-Sr35 only and (iii) CS-Sr35 + sono. The gradual bone repair process was elucidated by X-ray, histology and micro-CT analyses. Overall, our results showed that the CS-Sr35 + sono exhibited a tailored biodissolution behavior with complete defect repair and reconstruction. Meanwhile, the group with only CS-Sr35 granules had less osteoblastic healing while the blank group showed inadequate critical-sized defect repair throughout the study. Our study suggests that, the synergistic technique of combining bioceramic granule with sonoporation significantly optimizes osteogenic activity and biomineralization ability of the bioceramic granule for new bone growth in osteoporotic pathology and also this tailored technique provides versatile approach for improving the biological effect for next generation reconstruction and repair of diseased bone defect.

Potential applications of medicinal herbs and phytochemicals in oral and dental health: Status quo and future perspectives

OBJECTIVE

Herbal therapies are utilized to treat a broad diversity of diseases all over the globe. Although no clinical studies have been conducted to demonstrate the antibacterial, antimicrobial, and antiplaque characteristics of these plants, this does not imply that they are ineffectual as periodontal treatments or anti-cariogenic drugs. However, there is a scarcity of research confirming their efficacy and worth.

SUBJECT

Herbs are utilized in dentistry as antimicrobial, antineoplastic, antiseptic, antioxidant, and analgesics agents as well as for the elimination of bad breath. In addition, the application of herbal agents in tissue engineering improved the regeneration of oral and dental tissues. This study reviews the application of medicinal herbs for the treatment of dental and oral diseases in different aspects.

METHODS

This article focuses on current developments in the use of medicinal herbs and phytochemicals in oral and dental health. An extensive literature review was conducted via an Internet database, mostly PubMed. The articles included full-text publications written in English without any restrictions on a date.

CONCLUSION

Plants have been suggested, as an alternate remedy for oral-dental problems, and this vocation needs long-term dependability. More research on herbal medicine potential as pharmaceutical sources and/or therapies is needed.

Enhancing the Mechanical Properties and Aging Resistance of 3D-Printed Polyurethane through Polydopamine and Graphene Coating

Three-dimensional (3D) printing is a versatile manufacturing method widely used in various industries due to its design flexibility, rapid production, and mechanical strength. Polyurethane (PU) is a biopolymer frequently employed in 3D printing applications, but its susceptibility to UV degradation limits its durability. To address this issue, various additives, including graphene, have been explored to enhance PU properties. Graphene, a two-dimensional carbon material, possesses remarkable mechanical and electrical properties, but challenges arise in its dispersion within the polymer matrix. Surface modification techniques, like polydopamine (PDA) coating, have been introduced to improve graphene's compatibility with polymers. This study presents a method of 3D printing PU scaffolds coated with PDA and graphene for enhanced UV stability. The scaffolds were characterized through X-ray diffraction, Fourier-transform infrared spectroscopy, mechanical testing, scanning electron microscopy, and UV durability tests. Results showed successful PDA coating, graphene deposition, and improved mechanical properties. The PDA-graphene-modified scaffolds exhibited greater UV resistance over time, attributed to synergistic effects between PDA and graphene. These findings highlight the potential of combining PDA and graphene to enhance the stability and mechanical performance of 3D-printed PU scaffolds.

Comparative Biocompatibility and Odonto-/Osteogenesis Effects of Hydraulic Calcium Silicate-Based Cements in Simulated Direct and Indirect Approaches for Regenerative Endodontic Treatments: A Systematic Review

BACKGROUND

Regenerative dentistry is the operation of restoring dental, oral and maxillofacial tissues. Currently, there are no guidelines for the ideal cement/material in regenerative endodontic treatments (RET). Hydraulic calcium silicate-based cements (hCSCs) are currently the material of choice for RET.

OBJECTIVES

This systematic review was conducted to gather all of the different direct and indirect approaches of using hCSCs in RET in vitro and in vivo, and to ascertain if there are any superiorities to indirect approaches.

METHODS AND MATERIALS

This systematic review was conducted according to the 2020 PRISMA guidelines. The study question according to the PICO format was as follows: Comparison of the biological behavior (O) of stem cells (P) exposed to hCSCs through direct and indirect methods (I) with untreated stem cells (C). An electronic search was executed in Scopus, Google Scholar, and PubMed.

RESULTS

A total of 78 studies were included. Studies were published between 2010 and 2022. Twenty-eight commercially available and eighteen modified hCSCs were used. Seven exposure methods (four direct and three indirect contacts) were assessed. ProRoot MTA and Biodentine were the most used hCSCs and had the most desirable results. hCSCs were either freshly mixed or set before application. Most studies allowed hCSCs to set in incubation for 24 h before application, which resulted in the most desirable biological outcomes. Freshly mixed hCSCs had the worst outcomes. Indirect methods had significantly better viability/proliferation and odonto-/osteogenesis outcomes.

CONCLUSION

Biodentine and ProRoot MTA used in indirect exposure methods result in desirable biological outcomes.

Combined Effects of Polydopamine-Assisted Copper Immobilization on 3D-Printed Porous Ti6Al4V Scaffold for Angiogenic and Osteogenic Bone Regeneration

Numerous studies have demonstrated that biological compounds and trace elements such as dopamine (DA) and copper ions (Cu) could be modified onto the surfaces of scaffolds using a one-step immersion process which is simple, inexpensive and, most importantly, non-cytotoxic. The development and emergence of 3D printing technologies such as selective laser melting (SLM) have also made it possible for us to fabricate bone scaffolds with precise structural designs using metallic compounds. In this study, we fabricated porous titanium scaffolds (Ti) using SLM and modified the surface of Ti with polydopamine (PDA) and Cu. There are currently no other reported studies with such a combination for osteogenic and angiogenic-related applications. Results showed that such modifications did not affect general appearances and microstructural characteristics of the porous Ti scaffolds. This one-step immersion modification allowed us to modify the surfaces of Ti with different concentrations of Cu ions, thus allowing us to fabricate individualized scaffolds for different clinical scenarios. The modification improved the hydrophilicity and surface roughness of the scaffolds, which in turn led to promote cell behaviors of Wharton’s jelly mesenchymal stem cells. Ti itself has high mechanical strength, therefore making it suitable for surgical handling and clinical applications. Furthermore, the scaffolds were able to release ions in a sustained manner which led to an upregulation of osteogenic-related proteins (bone alkaline phosphatase, bone sialoprotein and osteocalcin) and angiogenic-related proteins (vascular endothelial growth factor and angiopoietin-1). By combining additive manufacturing, Ti6Al4V scaffolds, surface modification and Cu ions, the novel hybrid 3D-printed porous scaffold could be fabricated with ease and specifically benefited future bone regeneration in the clinic.

Promotion Effect of Angelica Sinensis Extract on Angiogenesis of Chicken Preovulatory Follicles in Vitro

Preovulatory follicles need a network of blood vessels to growth and maturation in hens (Gallus gallus). Angelica sinensis (Oliv.) (AS), a traditional Chinese herb, displays a novel pro-angiogenic activity. The molecular mechanisms underlying AS promoting preovulatory follicles angiogenesis are poorly understand. Several recent studies investigated the expression of vascular endothelial growth factor A (VEGF-A) in angiogenesis. In order to explore the promotion effect of AS extract on angiogenesis of chicken preovulatory follicles, we studied the effect of AS extract on follicle microvascular endothelial-like cells of chicken (FMEC) and granulosa cells (GC). The current study indicated that AS extract could promote the proliferation of FMECs and GCs. The assays of wounding healing, transwell invasion and tube formation showed that AS extract could enhance the invasion and migration ability of FMECs in vitro. The results of western blot and RT-PCR showed that AS extract promoted the phosphorylation of vascular endothelial growth factor receptor 2 (VEGFR2) in FMECs by activating the PI3K/AKT signaling pathway. The AS extract activated PI3K/AKT signaling pathway and up-regulated the expressions of hypoxia-inducible factor 1-α (HIF1-α) and VEGF-A in GCs. In addition, treatment of FMECs and GCs with LY294002 (a PI3K inhibitor) significantly down-regulated the phosphorylation of VEGFR2, VEGF-A, and HIF1-α. The mRNA expression levels of PI3K, AKT, VEGF-A, VEGFR2, and HIF1-α were consistent with protein expression levels. In conclusion, our research showed that AS extract can promote the follicle angiogenesis in hens in vitro, providing a basis for application of the traditional Chinese herb AS in poultry production.

Additive Manufacturing of Caffeic Acid-Inspired Mineral Trioxide Aggregate/Poly-ε-Caprolactone Scaffold for Regulating Vascular Induction and Osteogenic Regeneration of Dental Pulp Stem Cells

Mineral trioxide aggregate (MTA) is a common biomaterial used in endodontics regeneration due to its antibacterial properties, good biocompatibility and high bioactivity. Surface modification technology allows us to endow biomaterials with the necessary biological targets for activation of specific downstream functions such as promoting angiogenesis and osteogenesis. In this study, we used caffeic acid (CA)-coated MTA/polycaprolactone (PCL) composites and fabricated 3D scaffolds to evaluate the influence on the physicochemical and biological aspects of CA-coated MTA scaffolds. As seen from the results, modification of CA does not change the original structural characteristics of MTA, thus allowing us to retain the properties of MTA. CA-coated MTA scaffolds were shown to have 25% to 55% higher results than bare scaffold. In addition, CA-coated MTA scaffolds were able to significantly adsorb more vascular endothelial growth factors (p < 0.05) secreted from human dental pulp stem cells (hDPSCs). More importantly, CA-coated MTA scaffolds not only promoted the adhesion and proliferation behaviors of hDPSCs, but also enhanced angiogenesis and osteogenesis. Finally, CA-coated MTA scaffolds led to enhanced subsequent in vivo bone regeneration of the femur of rabbits, which was confirmed using micro-computed tomography and histological staining. Taken together, CA can be used as a potently functional bioactive coating for various scaffolds in bone tissue engineering and other biomedical applications in the future.

The Development of Light-Curable Calcium-Silicate-Containing Composites Used in Odontogenic Regeneration

Pulp regeneration is one of the most successful areas in the field of tissue regeneration, despite its current limitations. The biocompatibility of endodontic biomaterials is essential in securing the oral microenvironment and supporting pulp tissue regeneration. Therefore, the objective of this study was to investigate the new light-curable calcium silicate (CS)-containing polyethylene glycol diacrylate (PEGDA) biocomposites’ regulation of human dental pulp stem cells (hDPSCs) in odontogenic-related regeneration. The CS-containing PEGDA (0 to 30 wt%) biocomposites are applied to endodontics materials to promote their mechanical, bioactive, and biological properties. Firstly, X-ray diffraction and Fourier-transform infrared spectroscopy showed that the incorporation of CS increased the number of covalent bonds in the PEGDA. The diameter tension strength of the CS-containing PEGDA composite was significantly higher than that of normal PEGDA, and a different microstructure was detected on the surface. Samples were analyzed for their surface characteristics and Ca/Si ion-release profiles after soaking in simulated body fluid for different periods of time. The CS30 group presented better hDPSC adhesion and proliferation in comparison with CS0. Higher values of odontogenic-related biomarkers were found in hDPSCs on CS30. Altogether, these results prove the potential of light-curable CS-containing PEGDA composites as part of a ‘point-of-care’ strategy for application in odontogenesis-related regeneration.

Bidirectional Differentiation of Human-Derived Stem Cells Induced by Biomimetic Calcium Silicate-Reinforced Gelatin Methacrylate Bioink for Odontogenic Regeneration

Tooth loss or damage is a common problem affecting millions of people worldwide, and it results in significant impacts on one’s quality of life. Dental regeneration with the support of stem cell-containing scaffolds has emerged as an alternative treatment strategy for such cases. With this concept in mind, we developed various concentrations of calcium silicate (CS) in a gelatin methacryloyl (GelMa) matrix and fabricated human dental pulp stem cells (hDPSCs)-laden scaffolds via the use of a bioprinting technology in order to determine their feasibility in promoting odontogenesis. The X-ray diffraction and Fourier transform-infrared spectroscopy showed that the incorporation of CS increased the number of covalent bonds in the GelMa hydrogels. In addition, rheological analyses were conducted for the different concentrations of hydrogels to evaluate their sol–gel transition temperature. It was shown that incorporation of CS improved the printability and printing quality of the scaffolds. The printed CS-containing scaffolds were able to release silicate (Si) ions, which subsequently significantly enhanced the activation of signaling-related markers such as ERK and significantly improved the expression of odontogenic-related markers such as alkaline phosphatase (ALP), dentin matrix protein-1 (DMP-1), and osteocalcin (OC). The calcium deposition assays were also significantly enhanced in the CS-containing scaffold. Our results demonstrated that CS/GelMa scaffolds were not only enhanced in terms of their physicochemical behaviors but the odontogenesis of the hDPSCs was also promoted as compared to GelMa scaffolds. These results demonstrated that CS/GelMa scaffolds can serve as cell-laden materials for future clinical applications and use in dentin regeneration.

Mechanical assessment and odontogenic behavior of a 3D-printed mesoporous calcium silicate/calcium sulfate/poly-ε-caprolactone composite scaffold

BACKGROUND/PURPOSE

Tissue engineering in dentistry has fundamentally changed the way endodontists assess treatment options. Our previous study found that quercetin-contained mesoporous calcium silicate/calcium sulfate (MSCSQ) could induce hard tissue defect region regeneration. This study focused on whether the MSCSQ scaffold could also be effective in regulating odontogenesis and dentin regeneration.

METHODS

In this study, we fabricated MSCSQ composite scaffolds using the 3D printing technique. The characteristics of the MSCSQ scaffold were examined by scanning electron microscope (SEM), and mechanical properties were also assessed. In addition, we evaluated the cell viability, cell proliferation, odontogenic-related protein expression, and mineralization behavior of human dental pulp stem cells (hDPSCs) cultured on different scaffolds.

RESULTS

We found the precipitation of spherical-apatite on the scaffold surface rapidly in short periods. The in-vitro results for cell behavior revealed that hDPSCs with an MSCSQ scaffold were significantly higher in cell viability as followed time points. In addition, the specific makers of odontogenesis, such as DSPP and DMP-1 proteins, were induced obviously after culturing the hDPSCs on the MSCSQ scaffold.

CONCLUSION

Our results demonstrated that MSCSQ scaffolds could enhance physicochemical and biological behaviors compared to mesoporous calcium silicate/calcium sulfate (MSCS) scaffolds. In addition, MSCSQ scaffolds also enhanced odontogenic and immuno-suppressive properties compared to MSCS scaffolds. These results indicated that MSCSQ scaffolds could be considered a potential bioscaffold for clinical applications and dentin regeneration.

The synergistic effects of quercetin-containing 3D-printed mesoporous calcium silicate/calcium sulfate/poly-ε-caprolactone scaffolds for the promotion of osteogenesis in mesenchymal stem cells

BACKGROUND/PURPOSE

Several growth factors were proven to be effective in the treatment of bone defects and fractures and thus have great potential for bone regeneration applications. However, it needs low-temperature storage and transportation. This study aimed to investigate the herbal extract quercetin, a candidate for natural flavonoid compounds that have been reported to be involved in regulating inflammation and improving immunity and health.

METHODS

In this study, we prepared quercetin (Q)/mesoporous calcium silicate calcium sulfate (MSCS)/polycaprolactone (PCL) composite scaffolds using the 3D printing technique, where we immersed it in simulated body fluid (SBF) solution and soaked it for up to 60 days. The characteristics of quercetin scaffold were examined by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), immunofluorescence, and Alizarin Red S staining.

RESULTS

We found precipitation of apatite on the surface of the scaffold. The in vitro results for cell proliferation, cytotoxicity, and immunofluorescence staining revealed that Wharton's jelly mesenchymal stem cells (WJMSCs) with a 2% quercetin (Q2) scaffold were significantly higher in number than with 1% quercetin (Q1) and MSCS scaffolds. The phalloidin staining of cell skeletons on the surface of Q2 revealed powerful cell-to-cell adhesion and high expression of green fluorescence. The Q2 scaffold also had the highest calcium deposit levels based on Alizarin Red S staining in all scaffolds. This indicated that quercetin was able to induce cell growth and mitosis, echoing the previous preliminary results.

CONCLUSION

Our initial results indicate that this natural herbal extract can be a good bone-based gene substitution for bone regeneration.

Incorporation of Calcium Sulfate Dihydrate into a Mesoporous Calcium Silicate/Poly-ε-Caprolactone Scaffold to Regulate the Release of Bone Morphogenetic Protein-2 and Accelerate Bone Regeneration

Tissue engineering and scaffolds play an important role in tissue regeneration by supporting cell adhesion, proliferation, and differentiation. The design of a scaffold is critical in determining its feasibility, and it is critical to note that each tissue is unique in terms of its morphology and composition. However, calcium-silicate-based scaffolds are undegradable, which severely limits their application in bone regeneration. In this study, we developed a biodegradable mesoporous calcium silicate (MS)/calcium sulfate (CS)/poly-ε-caprolactone (PCL) composite and fabricated a composite scaffold with 3D printing technologies. In addition, we were able to load bone morphogenetic protein-2 (BMP-2) into MS powder via a one-step immersion procedure. The results demonstrated that the MS/CS scaffold gradually degraded within 3 months. More importantly, the scaffold exhibited a gradual release of BMP-2 throughout the test period. The adhesion and proliferation of human dental pulp stem cells on the MS/CS/BMP-2 (MS/CS/B) scaffold were significantly greater than that on the MS/CS scaffold. It was also found that cells cultured on the MS/CS/B scaffold had significantly higher levels of alkaline phosphatase activity and angiogenic-related protein expression. The MS/CS/B scaffold promoted the growth of new blood vessels and bone regeneration within 4 weeks of implantation in rabbits with induced critical-sized femoral defects. Therefore, it is hypothesized that the 3D-printed MS/CS/B scaffold can act both as a conventional BMP-2 delivery system and as an ideal osteoinductive biomaterial for bone regeneration.

Calcium Silicate-Activated Gelatin Methacrylate Hydrogel for Accelerating Human Dermal Fibroblast Proliferation and Differentiation

Wound healing is a complex process that requires specific interactions between multiple cells such as fibroblasts, mesenchymal, endothelial, and neural stem cells. Recent studies have shown that calcium silicate (CS)-based biomaterials can enhance the secretion of growth factors from fibroblasts, which further increased wound healing and skin regeneration. In addition, gelatin methacrylate (GelMa) is a compatible biomaterial that is commonly used in tissue engineering. However, it has low mechanical properties, thus restricting its fullest potential for clinical applications. In this study, we infused Si ions into GelMa hydrogel and assessed for its feasibility for skin regeneration applications by observing for its influences on human dermal fibroblasts (hDF). Initial studies showed that Si could be successfully incorporated into GelMa, and printability was not affected. The degradability of Si-GelMa was approximately 20% slower than GelMa hydrogels, thus allowing for better wound healing and regeneration. Furthermore, Si-GelMa enhanced cellular adhesion and proliferation, therefore leading to the increased secretion of collagen I other important extracellular matrix (ECM) remodeling-related proteins including Ki67, MMP9, and decorin. This study showed that the Si-GelMa hydrogels were able to enhance the activity of hDF due to the gradual release of Si ions, thus making it a potential candidate for future skin regeneration clinical applications.