Review of electrochemical studies of complexes containing the Fe2S2 core characteristic of [FeFe]-hydrogenases including catalysis by these complexes of the reduction of acids to form dihydrogen

A cross-metathesis approach for polymetallic [FeFe]-hydrogenase mimics

A method has been developed for synthesizing [FeFe]-H2ase mimics with diverse structures and properties, employing cross-metathesis of olefins. Vinylmetallocenes (5 and 6) and vinyl half-sandwich complexes (10 and 11) have been used as cross-metathesis partners with [FeFe]-H2ase mimics (4, 8, and 9) bearing a double bond in the moiety attached to the ADT-bridge nitrogen. Electrochemical studies of these complexes, encompassing metallocene-type (7a-b, 12a-b, and 13a-b) as well as half-sandwich derivatives (12c and 13c-d), have demonstrated that the introduction of a redox unit has a marginal impact on the reduction potential of these [FeFe]-H2ase mimics. The application of this cross-metathesis approach has allowed the synthesis of [FeFe]-H2ase mimics featuring an Ir(III) electrochemical antenna (16-18) as well as systems having an electron-donor-photosensitizer structure (ED-PS) (23). The electrocatalytic properties of these complexes have been elucidated through electrochemical studies.

Synthetic styrene-based bioinspired model of the [FeFe]-hydrogenase active site for electrocatalytic hydrogen evolution

Integration of molecular catalysts inside polymeric scaffolds has gained substantial attention over the past decade, as it provides a path towards generating systems with enhanced stability as well as enzyme-like morphologies and properties. In the context of solar fuels research and chemical energy conversion, this approach has been found to improve both rates and energy efficiencies of a range of catalytic reactions. However, system performance still needs to be improved to reach technologically relevant currents and stability, parameters that are heavily influenced by the nature of the incorporated molecular catalyst. Here, we have focused on the integration of a biomimetic {Fe2(μ-adt)(CO)6} (-CH2NHCH2S-, azadithiolate or adt2-) based active site ("[2Fe2S]adt"), inspired by the catalytic cofactor of [FeFe] hydrogenases, within a synthetic polymeric scaffold using free radical polymerization. The resulting metallopolymers [2Fe2S]adtk[DMAEMA]l[PyBMA]m (DMAEMA = dimethylaminoethyl methacrylate as water soluble monomer; PyBMA = 4-(pyren-1-yl)-butyl methacrylate as hydrophobic anchor for heterogenization) were found to be active for electrochemical H2 production in neutral aqueous media. The pyrene content was varied to optimize durability and activity. Following immobilization on multiwalled carbon nanotubes (MWNT) the most active metallopolymer, containing ∼2.3 mol% of PyBMA, could reach a turnover number for hydrogen production (TONH2) of ∼0.4 ×105 over 20 hours of electrolysis at an overpotential of 0.49 V, two orders of magnitude higher than the isolated catalyst counterpart. The study provides a synthetic methodology for incorporating catalytic units featuring second coordination sphere functional groups, and highlights the benefit of the confinement within the polymer matrix for catalytic performance.

Synthesis of phosphine derivatives of [Fe2(CO)6(μ-sdt)] (sdt = SCH2SCH2S) and investigation of their proton reduction capabilities

The reactions of [Fe2(CO)6(μ-sdt)] (1) (sdt = SCH2SCH2S) with phosphine ligands have been investigated. Treatment of 1 with dppm (bis(diphenylphosphino)methane) or dcpm (bis(dicyclohexylphosphino)methane) affords the diphosphine-bridged products [Fe2(CO)4(μ-sdt)(μ-dppm)] (2) and [Fe2(CO)4(μ-sdt)(μ-dcpm)] (3), respectively. The complex [Fe2(CO)4(μ-sdt)(κ2-dppv)] (4) with a chelating diphosphine was obtained by reacting 1 with dppv (cis-1,2-bis(diphenylphosphino)ethene). Reaction of 1 with dppe (1,2-bis(diphenylphosphino)ethane) produces [{Fe2(CO)4(μ-sdt)}2(μ-κ1-dppe)] (5) in which the diphosphine forms an intermolecular bridge between two diiron cluster fragments. Three products were obtained when dppf (1,1'-bis(diphenylphosphino)ferrocene) was introduced to complex 1; they were [Fe2(CO)5(μ-sdt)(κ1-dppfO)] (6), the previously known [{Fe2(CO)5(μ-sdt)}2(μ-κ1-κ1-dppf)] (7), and [Fe2(CO)4(μ-sdt)(μ-dppf)] (8), with complex 8 being produced in highest yield. Single crystal X-ray diffraction analysis was performed on compounds 2, 3 and 8. All structures reveal the adoption of an anti-arrangement of the dithiolate bridges, while the diphosphines occupy dibasal positions. Infra-red spectroscopy indicates that the mono-substituted complexes 5, 6, and 7 are inert to protonation by HBF4.Et2O, but complexes 2, 3, 4 and [Fe2(CO)5(μ-sdt)(κ1-PPh3)] (9) show shifts of their ν(C-O) resonances that indicate that protons bind to the metal cores of the clusters. Addition of the one-electron oxidant [Cp2Fe]PF6 does not lead to any discernable shift in the IR resonances. The redox chemistry of the complexes was investigated by cyclic voltammetry, and the abilities of complexes to catalyze electrochemical proton reduction were examined.

Non-Covalent Integration of a [FeFe]-Hydrogenase Mimic to Multiwalled Carbon Nanotubes for Electrocatalytic Hydrogen Evolution

Surface integration of molecular catalysts inspired from the active sites of hydrogenase enzymes represents a promising route towards developing noble metal-free and sustainable technologies for H₂ production. Efficient and stable catalyst anchoring is a key aspect to enable this approach. Herein, we report the preparation and electrochemical characterization of an original diironhexacarbonyl complex including two pyrene groups per catalytic unit in order to allow for its smooth integration, through π-interactions, onto multiwalled carbon nanotube-based electrodes. In this configuration, the grafted catalyst could reach turnover numbers for H₂ production (TON_H2 ) of up to 4±2×10³ within 20 h of bulk electrolysis, operating at neutral pH. Post operando analysis of catalyst functionalized electrodes revealed the degradation of the catalytic unit occurred via loss of the iron carbonyl units, while the anchoring groups and most part of the ligand remained attached onto multiwalled carbon nanotubes.

Bulky oxadithiolate-bridged [FeFe]‑hydrogenase mimics [Fe2(μ-R2odt)(CO)4(κ2-diphosphine)] (R = Ph and H) with chelating diphosphines

In order to develop an attractive generation of bulky oxadithiolate-bridged [FeFe]‑hydrogenase mimics with chelating diphosphines, two new series of asymmetrically diphosphine-substituted diiron model complexes [Fe₂(μ-R₂odt)(CO)₄(κ²-diphosphine)] (3-5) with bulky Ph₂odt bridge and their reference counterparts (6-8) with common odt bridge were obtained from the Me₃NO-assisted substitutions of diiron hexacarbonyl precursors [Fe₂(μ-R₂odt)(CO)₆] (R₂odt = (SCHR)₂O, R = Ph (1) and H (2)) with different diphosphines such as (Ph₂P)₂NBn (labelled PN^BnP, Bn = benzyl), (Ph₂PCH₂)₂NBn (PCN^BnCP), and (Ph₂PCH₂)₂CH₂ (DPPP)), respectively. All the as-prepared complexes have been characterized by elemental analysis, IR plus NMR spectroscopies, and particularly by X-ray crystallography for 3-8. It is interesting to note that complexes 3 and 6 chelating by small bite-angle PN^BnP diphosphine have the favorable dibasal isomer whereas analogues 4, 5 and 7, 8 chelating by flexible backbone PCN^BnCP or DPPP ligands possess the main apical-basal isomer in solution or in the solid state. Further, the electrochemical properties of two pairs of representative complexes 3, 6 and 5, 8 are explored and compared by cyclic voltammetry (CV) in the absence and presence of trifluoroacetic acid (CF₃CO₂H) as proton source, indicating that the complete protonations of 3, 6 and 5, 8 with higher concentration of CF₃CO₂H lead to two new catalytic waves for the electrocatalytic proton reduction to hydrogen (H₂).

Novel [FeFe]-Hydrogenase Mimics: Unexpected Course of the Reaction of Ferrocenyl α-Thienyl Thioketone with Fe3(CO)12

The influence of the substitution pattern in ferrocenyl α-thienyl thioketone used as a proligand in complexation reactions with Fe₃(CO)₁₂ was investigated. As a result, two new sulfur–iron complexes, considered [FeFe]-hydrogenase mimics, were obtained and characterized by spectroscopic techniques (¹H, ¹³C{¹H} NMR, IR, MS), as well as by elemental analysis and X-ray single crystal diffraction methods. The electrochemical properties of both complexes were studied and compared using cyclic voltammetry in the absence and in presence of acetic acid as a proton source. The performed measurements demonstrated that both complexes can catalyze the reduction of protons to molecular hydrogen H₂. Moreover, the obtained results showed that the presence of the ferrocene moiety at the backbone of the linker of both complexes improved the stability of the reduced species.

Hydroxyl-Decorated Diiron Complex as a [FeFe]-Hydrogenase Active Site Model Complex: Light-Driven Photocatalytic Activity and Heterogenization on Ethylene-Bridged Periodic Mesoporous Organosilica

A biomimetic model complex of the [FeFe]-hydrogenase active site (FeFeOH) with an ethylene bridge and a pendant hydroxyl group has been synthesized, characterized and evaluated as catalyst for the light-driven hydrogen production. The interaction of the hydroxyl group present in the complex with 3-isocyanopropyltriethoxysilane provided a carbamate triethoxysilane bearing a diiron dithiolate complex (NCOFeFe), thus becoming a potentially promising candidate for anchoring on heterogeneous supports. As a proof of concept, the NCOFeFe precursor was anchored by a grafting procedure into a periodic mesoporous organosilica with ethane bridges (EthanePMO@NCOFeFe). Both molecular and heterogenized complexes were tested as catalysts for light-driven hydrogen generation in aqueous solutions. The photocatalytic conditions were optimized for the homogenous complex by varying the reaction time, pH, amount of the catalyst or photosensitizer, photon flux, and the type of light source (light-emitting diode (LED) and Xe lamp). It was shown that the molecular FeFeOH diiron complex achieved a decent turnover number (TON) of 70 after 6 h, while NCOFeFe and EthanePMO@NCOFeFe had slightly lower activities showing TONs of 37 and 5 at 6 h, respectively.

Fast Proton Transport in FeFe Hydrogenase via a Flexible Channel and a Proton Hole Mechanism

Di-iron hydrogenases are a class of enzymes that are capable of reducing protons to form molecular hydrogen with high efficiency. In addition to the catalytic site, these enzymes have evolved dedicated pathways to transport protons and electrons to the reaction center. Here, we present a detailed study of the most likely proton transfer pathway in such an enzyme using QM/MM molecular dynamics simulations. The protons are transported through a channel lined out from the protein exterior to the di-iron active site, by a series of hydrogen-bonded, weakly acidic or basic, amino acids and two incorporated water molecules. The channel shows remarkable flexibility, which is an essential feature to quickly reset the hydrogen-bond direction in the channel after each proton passing. Proton transport takes place via a “hole” mechanism, rather than an excess proton mechanism, the free energy landscape of which is remarkably flat, with a highest transition state barrier of only 5 kcal/mol. These results confirm our previous assumptions that proton transport is not rate limiting in the H₂ formation activity and that cysteine C299 may be considered protonated at physiological pH conditions. Detailed understanding of this proton transport may aid in the ongoing attempts to design artificial biomimetic hydrogenases for hydrogen fuel production.

Linear Scaling Relationships to Predict pKa's and Reduction Potentials for Bioinspired Hydrogenase Catalysis

Biomimetic catalysts inspired by the active site of the [FeFe] hydrogenase enzyme can convert protons into molecular hydrogen. Minimizing the overpotential of the electrocatalytic process remains a major challenge for practical application of the catalyst. The catalytic cycle of the hydrogen production follows an ECEC mechanism (E represents an electron transfer step, and C refers to a chemical step), in which the electron and proton transfer steps can be either sequential or coupled (PCET). In this study, we have calculated the pKa's and the reduction potentials for a series of commonly used ligands (80 different complexes) using density functional theory. We establish that the required acid strength for protonation at the Fe-Fe site correlates with the standard reduction potential of the di-iron complexes with a linear energy relationship. These linear relationships allow for fast screening of ligands and tuning of the properties of the catalyst. Our study also suggests that bridgehead ligand properties, such as bulkiness and aromaticity, can be exploited to alter or even break the linear scaling relationships.

Di-, tri- and tetraphosphine-substituted Fe/Se carbonyls: Synthesis, Characterization and electrochemical properties

The active sites of [FeFe]-hydrogenase promoted by Fe/E (E=S, Se) clusters have attracted considerable interest due to their significance for understanding the interconversion of hydrogen with protons and electrons. As...

Mechanism of Diiron Hydrogenase Complexes Controlled by Nature of Bridging Dithiolate Ligand

Bio-inorganic complexes inspired by hydrogenase enzymes are designed to catalyze the hydrogen evolution reaction (HER). A series of new diiron hydrogenase mimic complexes with one or two terminal tris(4-methoxyphenyl)phosphine and different μ-bridging dithiolate ligands and show catalytic activity towards electrochemical proton reduction in the presence of weak and strong acids. A series of propane- and benzene-dithiolato-bridged complexes was synthesized, crystallized, and characterized by various spectroscopic techniques and quantum chemical calculations. Their electrochemical properties as well as the detailed reaction mechanisms of the HER are elucidated by density functional theory (DFT) methods. The nature of the μ-bridging dithiolate is critically controlling the reaction and performance of the HER of the complexes. In contrast, terminal phosphine ligands have no significant effects on redox activities and mechanism. Mono- or di-substituted propane-dithiolate complexes afford a sequential reduction (electrochemical; E) and protonation (chemical; C) mechanism (ECEC), while the μ-benzene dithiolate complexes follow a different reaction mechanism and are more efficient HER catalysts.

Lewis acid protection turns cyanide containing [FeFe]-hydrogenase mimics into proton reduction catalysts

Sustainable sources of hydrogen are a vital component of the envisioned energy transition. Understanding and mimicking the [FeFe]-hydrogenase provides a route to achieving this goal. In this study we re-visit a molecular mimic of the hydrogenase, the propyl dithiolate bridged complex [Fe₂(μ-pdt)(CO)₄(CN)₂]²⁻, in which the cyanide ligands are tuned via Lewis acid interactions. This system provides a rare example of a cyanide containing [FeFe]-hydrogenase mimic capable of catalytic proton reduction, as demonstrated by cyclic voltammetry. EPR, FTIR, UV-vis and X-ray absorption spectroscopy are employed to characterize the species produced by protonation, and reduction or oxidation of the complex. The results reveal that biologically relevant iron-oxidation states can be generated, potentially including short-lived mixed valent Fe(i)Fe(ii) species. We propose that catalysis is initiated by protonation of the diiron complex and the resulting di-ferrous bridging hydride species can subsequently follow two different pathways to promote H₂ gas formation depending on the applied reduction potential.

Mimicking the hydrogen-bonding interactions of the [FeFe]-hydrogenase active-site using Lewis acids transforms an otherwise unstable cyanide containing hydrogenase mimic into a proton reduction catalyst.

Electrocatalytic Behavior of Tetrathiafulvalene (TTF) and Extended Tetrathiafulvalene (exTTF) [FeFe] Hydrogenase Mimics

TTF- and exTTF-containing [(μ-S₂)Fe₂(CO)₆] complexes have been prepared by the photochemical reaction of TTF or exTTF and [(μ-S₂)Fe₂(CO)₆]. These complexes are able to interact with PAHs. In the absence of air and in acid media an electrocatalytic dihydrogen evolution reaction (HER) occurs, similarly to analogous [(μ-S₂)Fe₂(CO)₆] complexes. However, in the presence of air, the TTF and exTTF organic moieties strongly influence the electrochemistry of these systems. The reported data may be valuable in the design of [FeFe] hydrogenase mimics able to combine the HER properties of the [FeFe] cores with the unique TTF properties.

Electrocatalytic and Photocatalytic Reduction of Carbon Dioxide by Earth-abundant Bimetallic Molecular Catalysts

Converting CO₂ into useful resources by electrocatalysis and photocatalysis is a promising strategy for recycling of the gas and electrification of industries. Numerous studies have shown that multinuclear metal catalysts have higher selectivity and catalytic activity than monometallic catalysts due to the synergistic effects between the metal sites. In this review, we summarize some of the recent progress on the electrocatalytic and photocatalytic reduction of CO₂ by earth-abundant bimetallic molecular catalysts.

[FeFe]-Hydrogenases: maturation and reactivity of enzymatic systems and overview of biomimetic models

[FeFe]-hydrogenases recieved increasing interest in the last decades. This review summarises important findings regarding their enzymatic reactivity as well as inorganic models applied as electro- and photochemical catalysts.

Cysteine residue-bridged dinuclear Ni–Fe complexes related to [NiFe]-H2ases

Cysteine residue-containing [NiFe]-H2ase models 1–6 have been prepared for the first time and some of them were found to be catalysts for H2 production from HOAc under CV conditions.

Diiron azadithiolate clusters supported on carbon nanotubes for efficient electrocatalytic proton reduction

The first example of diiron azadithiolate clusters supported on carbon nanotubes (1-f-SWCNTs) was constructed via covalent attachment. This nanohybrid shows efficient electrocatalytic proton reduction with a TOF of 9444 s⁻¹ in 0.2 N aqueous H₂SO₄.

Cyclopentadienone–NHC iron(0) complexes as low valent electrocatalysts for water oxidation

Design and application of earth abundant iron based molecular electrocatalysts for water oxidation, an essential challenge for sustainable energy applications.

Biochemical and artificial pathways for the reduction of carbon dioxide, nitrite and the competing proton reduction: effect of 2nd sphere interactions in catalysis

Reduction of oxides and oxoanions of carbon and nitrogen are of great contemporary importance as they are crucial for a sustainable environment.