Separation and determination of four active components in medicinal preparations by flow injection-capillary electrophoresis

Simultaneous Liquid Chromatographic Determination of Ebastine with Two Sympathomimetic Drugs Using a Monolithic Column

Ebastine (EBS) has been assayed in its laboratory-prepared co-formulated tablets with either pseudoephedrine hydrochloride (PSU) or phenylephrine hydrochloride (PHR) using isocratic reversed-phase chromatography. Separation was conducted using a 50 mm × 4.6 mm i.d., Chromolith® SpeedROD RP-18 end-capped column at ambient temperature. A mobile phase composed of water:acetonitrile in a ratio of 25:75 having a pH of 3.2, has been utilized at 1 mL/min with UV detection at 254 nm for both EBS and PSU and 274 nm for PHR which in turn increased the sensitivity of the proposed method significantly. Symmetric well-separated peaks resulted in a short chromatographic run; <5 min. The proposed method was subjected to detailed validation procedures and proved to be highly sensitive as shown from limit of quantification values which were 4.7, 39.4 and 10.2 μg/mL for EBS, PSU and PHR, respectively. The proposed method was used to analyze EBS in its laboratory-prepared co-formulated tablets; the obtained results were comparable to those resulting from the reference method.

A rapid Fourier-transform infrared (FTIR) spectroscopic method for direct quantification of paracetamol content in solid pharmaceutical formulations

A transmission FTIR spectroscopic method was developed for direct, inexpensive and fast quantification of paracetamol content in solid pharmaceutical formulations. In this method paracetamol content is directly analyzed without solvent extraction. KBr pellets were formulated for the acquisition of FTIR spectra in transmission mode. Two chemometric models: simple Beer's law and partial least squares employed over the spectral region of 1800-1000 cm(-1) for quantification of paracetamol content had a regression coefficient of (R(2)) of 0.999. The limits of detection and quantification using FTIR spectroscopy were 0.005 mg g(-(1) and 0.018 mg g(-1), respectively. Study for interference was also done to check effect of the excipients. There was no significant interference from the sample matrix. The results obviously showed the sensitivity of transmission FTIR spectroscopic method for pharmaceutical analysis. This method is green in the sense that it does not require large volumes of hazardous solvents or long run times and avoids prior sample preparation.

The application of capillary electrophoresis techniques in toxicological analysis

Capillary electrophoresis (CE) comprises a group of techniques used to separate chemical mixtures. Analytical separation is based on different electrophoretic mobilities, thereby allowing qualitative and quantitative evaluations to be made. The application of CE in medical science, especially in toxicological studies, is developing rapidly because of the short time required for analysis and its high sensitivity, selectivity and ability to determine substances of an acidic, alkaline and neutral character. This review focuses on the possibility of applying CE in toxicological analysis. Advances in different CE analyses and detection techniques connected with this method are described.

Chemometrical examination of active parameters and interactions in flow injection-capillary electrophoresis

The first detailed examination of flow injection-capillary electrophoresis (FI-CE) active parameters and their interactions via response surface methodology (RSM) is presented. Specifically, RSM in the form of a Box-Behnken design was implemented to effectively predict the significance of capillary length, voltage and injection volume on the optimization of an in-house built FI-CE analyzer. Initial studies were performed assessing peak height and peak shape of the model compound N,N-dimethylformamide. Optimum model conditions were then derived and used in the model separation of two small molecules, nicotinamide adenine dinucleotide, reduced form (NADH) and benzenesulfonamide. By implementing the RSM approach, detailed examination of active FI-CE parameters was possible, including the ability to reveal a significant interactive effect. This work is not only highly significant for advancing FI-CE developments, but instructive for investigators actively exploring other coupled analytical techniques and associated experimental parameters.