Radiochemical stability of fluconazole in the solid state

The Pressure-Induced Polymorphic Transformations in Fluconazole

The structural properties and Raman spectra of fluconazole have been studied by means of X-ray diffraction and Raman spectroscopy at pressures up to 2.5 and 5.5 GPa, respectively. At a pressure of 0.8 GPa, a polymorphic phase transition from the initial form I to a new triclinic form VIII has been observed. At higher pressure of P = 3.2 GPa, possible transformation into another new polymorphic form IX has been detected. The unit cell parameters and volumes, and vibration modes as functions of pressure have been obtained for the different forms of fluconazole.

The influence of ionizing radiation on itraconazole in the solid state

The aim of this study was to investigate the ionizing radiation effects, in the form of an electron beam, on itraconazole (ITR) in the solid phase. It was found that the ITR, under the influence of a standard 25 kGy dose of radiation used for the sterilization of drug substances, decomposed at 0.4%. Moreover, a gentle change of colour and a decrease in melting point does not exceed pharmacopoeial standards causing that ITR can be sterilized by radiation method. The use of high 400 kGy radiation doses resulted in a 6.5% decomposition of the ITR and eight radiodegradation products were found. However, with the exception of differential scanning calorimetry (DSC), the X-ray diffraction, Fourier transform infrared spectroscopy (FT-IR) and ultraviolet-visible (UV-vis) methods showed no changes in the form and the morphology of the crystals. The structures of all those compounds were investigated. It was confirmed that the ITR decomposition takes place by dehalogenation (one of Cl atom elimination), the oxidation in isobutyl residue (beside the triazole ring) and C-O bond rupture.

Pharmaceutical impurities and degradation products: uses and applications of NMR techniques

Current standards and regulations demand the pharmaceutical industry not only to produce highly pure drug substances, but to achieve a thorough understanding of the impurities accompanying their manufactured drug substances and products. These challenges have become important goals of process chemistry and have steadily stimulated the search of impurities after accelerated or forced degradation procedures. As a result, impurity profiling is one of the most attractive, active and relevant fields of modern pharmaceutical analysis. This activity includes the identification, structural elucidation and quantitative determination of impurities and degradation products in bulk drugs and their pharmaceutical formulations. Nuclear magnetic resonance (NMR) spectroscopy has evolved into an irreplaceable approach for pharmaceutical quality assessment, currently playing a critical role in unequivocal structure identification as well as structural confirmation (qualitative detection), enabling the understanding of the underlying mechanisms of the formation of process and/or degradation impurities. NMR is able to provide qualitative information without the need of standards of the unknown compounds and multiple components can be quantified in a complex sample without previous separation. When coupled to separative techniques, the resulting hyphenated methodologies enhance the analytical power of this spectroscopy to previously unknown levels. As a result, and by enabling the implementation of rational decisions regarding the identity and level of impurities, NMR contributes to the goal of making better and safer medicines. Herein are discussed the applications of NMR spectroscopy and its hyphenated derivate techniques to the study of a wide range pharmaceutical impurities. Details on the advantages and disadvantages of the methodology and well as specific challenges with regards to the different analytical problems are also presented.

Spectroscopic analysis of pindolol irradiated in the solid state

Pindolol ((2RS)-(1-(1H-indol-4-iloxy)-3- [(1-metyloetylo)amino]-2-propanol) in substantia was exposed to ionising radiation emitted by high energy electrons from an accelerator, in the standard sterilisation dose of 25 kGy and in higher doses from the range 50–400 kGy. The effects of irradiation were checked by spectrometric methods (UV, MS, FT-IR, EPR) and hyphenated methods (HPLC-MS) and the results were referred to those obtained for non-irradiated sample. EPR results indicated the presence of free radicals in irradiated samples, in the amount of 1.36 × 1016 spin g−1 for 25 kGy and 3.70×1016 spin g−1 for 400 kGy. The loss of pindolol content determined by HPLC was 1.34% after irradiation with 400 kGy, while the radiolytic yield of the total radiolysis for this dose of irradiation was 2.69×107 mol J−1. By means of HPLC-MS it was possible to separate and identify one product of radiolytic decomposition, which probably is 2-((R)-3-(1H-indol-4-yloxy)-2-hydroxypropylamino)propan-1-ol formed upon oxidation. In the range of sterilisation doses (25–50 kGy), pindolol was found to show high radiochemical stability and would probably be safely sterilised by the standard dose of 25 kGy.

The Cu(II)-fluconazole complex revisited. Part I: Structural characteristics of the system

Protonation equilibria and Cu(II) binding processes by an antifungal agent fluconazole, α-(2,4-difluorophenyl)-α-(1H-1,2,4-triazol-1-yl-methyl)-1H-1,2,4-triazole-1-ethanol, were studied using the UV-Vis, EPR and NMR spectroscopic techniques. The protonation constant of fluconazole was determined from NMR titration and attributed to N4' nitrogen atoms using the DFT methods. The spectroscopic data suggest that at pH as low as 0.4 the first complex is formed, in which one or two Cu(II) ions are bound to one of the nitrogen atoms (N4') from triazole rings. Above pH 1.5 each Cu(II) ion is surrounded by two nitrogen atoms (also N4') from two different ligand molecules, forming primary monomeric complexes and above pH=5, both dimeric or oligomeric species occur, which is well registered by the EPR technique. The mixture of Cu(NO(3))(2) with fluconazole in a 1:1 molar ratio in a water (pH=4.5)/ethanol solution gave crystals of [Cu(2)(H(2)O){(C(6)H(3)-2,4-F(2))(CH(2)N(3)C(2)H(2))(2)C-OH}{(C(6)H(3)-2,4-F(2))(CH(2)N(3)C(2)H(2))(2)C-O}(NO(3))](NO(3))(2)·9(H(2)O). This complex is the first example of a cupric 3D polymeric structure with a fluconazole ligand coordinated via both N2' and N4' atoms from the same triazole rings. At higher pH values, we obtained a binuclear complex [Cu(2)(L)(2)(H(2)O)(2)(NO(3))(2)], in which the copper(II) atoms were bridged by the oxygen atoms of the deprotonated OH group of fluconazole. The hypothetical oxidative properties of this system were also examined, however it failed to generate either reactive oxygen species or DNA scission products.

Studies on the characteristics of drug-loaded gelatin nanoparticles prepared by nanoprecipitation

The morphology of gelatin nanoparticles loaded with three different drugs (Tizanidine hydrochloride, Gatifloxacin and Fluconazole) and their characteristics of entrapment and release from gelatin nanoparticles were investigated by the analysis on nanoparticle size distribution, SEM and FT-IR in this study. The particles were prepared by nanoprecipitation using water and ethanol as a solvent and a nonsolvent, respectively. The exclusion of a crosslinking agent from the procedure led the system to have an irregularly-shaped morphology. Nonetheless, the uncrosslinked case of Gatifloxacin loading generally led to a more homogeneous population of nanoparticles than the uncrosslinked case of Tizanidine hydrochloride loading. No loading was achieved in the case of Fluconazole, whereas both Tizanidine hydrochloride and Gatifloxacin are observed of being capable of being loaded by nanoprecipitation. Tizanidine hydrochloride-loaded, blank and Gatifloxacin-loaded nanoparticles yielded, under crosslinked condition, 59.3, 23.1 and 10.6% of the used dried mass. The crosslinked Tizanidine hydrochloride-loaded particles showed the loading efficiency of 13.8%, which was decreased to 1.1% without crosslinking. A crosslinker such as glutaraldehyde is indispensable to enhance the Tizanidine hydrochloride-loading efficiency. To the contrary, the Gatifloxacin-loading efficiency for crosslinked ones was lower by a factor of 2-3 times than that for uncrosslinked ones. This is due to the carboxylic groups of Gatifloxacin and the aldehyde groups of glutaraldehyde competing with each other during the crosslinking process, to react with the amino groups of gelatin molecules. The loading efficiency of gelatin nanoparticles reported by other investigators greatly varies. Nevertheless, the loading efficiency reported by us is in good agreement with the drug-loading data of gelatin nanoparticles reported by other investigators. The 80% of loaded Tizanidine hydrochloride was released around 15 h after start-up of the release experiment, while the 20% of loaded Gatifloxacin was released more rapidly, as free Gatifloxacin, than the loaded Tizanidine hydrochloride and it showed the trend of sustained slow release during the remaining period of its release experiment. Furthermore, the result of comparative FT-IR analysis is consistent to that of the corresponding drug release study.

Influence of ionising irradiation on clotrimazole in the solid state

The effect of ionising irradiation on the antifungal drug clotrimazole has been studied. The compound was subjected to ionisation irradiation in the form of high-energy electron beam (25-800 kGy) from an accelerator. Before and after the irradiation the compound was subjected to the EPR, TLC, HPLC and HPLC-MS analysis. After irradiation with doses 400-800 kGy the colour of the substance was changed from white to cream. Four products of radiolysis appeared in the HPLC chromatogram at 7.7, 4.2, 6.4 and 14.6 min and the active ingredient content decreased to 96.5%. The irradiation with a dose of 25 kGy resulted in the appearance of trace amounts of the product at 7.7 min and free radicals (2.54 x 10(14)spins/g). On the basis of the HPLC-MS data, the main product of radiolysis (t(R)=7.7 min) is 1-(9-phenylfluoren-9-yl)-imidazole. Besides traces of (2-chlorophenyl)-diphenylmethanol, other impurities listed in the European Pharmacopoeia (European Pharmacopea, 5th edition, Council of Europe, Strasbourg, France, 2004.) have not been detected. Clotrimazole has been found to show relatively high resistance to ionising irradiation (greater than fluconazole) and probably will be suitable for radiation sterilisation but with doses lower than 25 kGy.