An ICP-MS platform for metal content assessment of cell culture media and evaluation of spikes in metal concentration on the quality of an IgG3:κ monoclonal antibody during production

Comparing nitric acid treatment and microwave digestion for efficiency of metal extraction from bioprocess samples

Metal ions may act as enzyme cofactors and influence the kinetics of biochemical reactions that may also influence the biological production of therapeutic proteins and quality attributes such as glycosylation. Because sample preparation is a significant step in the reliable analysis of metals, we compared two sample preparation procedures for metal analysis of bioreactor culture media samples by ICP-MS: (i) samples were diluted in 2 % nitric acid (treatment with nitric acid, TNA); and (ii) samples were mixed with equal volume of 5 % nitric acid and closed vessel digestion was performed in a microwave (closed vessel digestion, CVD). In the comparison of extraction efficiencies between TNA and CVD procedures, CVD showed better extraction for Ca and Cu among bulk metals (∼30 %) and for Ni among the trace metals (∼65 %) for the bioreactor broth supernatant samples. For the cell pellet samples, the CVD procedure was found to be better for extraction of Fe (∼65 % more) among bulk metals, Zn (∼20 % more) among minor metals and Co (∼60 % more) and Ni (∼45 % more) among trace metals. Differences between the two procedures were less than 10 % and TNA was better for all other metals quantified from both supernatant samples and cell pellet samples. The current study helps bring more clarity to the methodology on comprehensive metal analysis to monitor and maintain trace metal content for biologics production.

Trace metal optimization in CHO cell culture through statistical design of experiments

A majority of the biotherapeutics industry today relies on the manufacturing of monoclonal antibodies from Chinese hamster ovary (CHO) cells, yet challenges remain with maintaining consistent product quality from high-producing cell lines. Previous studies report the impact of individual trace metal supplemental on CHO cells, and thus, the combinatorial effects of these metals could be leveraged to improve bioprocesses further. A three-level factorial experimental design was performed in fed-batch shake flasks to evaluate the impact of time wise addition of individual or combined trace metals (zinc and copper) on CHO cell culture performance. Correlations among each factor (experimental parameters) and response variables (changes in cell culture performance) were examined based on their significance and goodness of fit to a partial least square's regression model. The model indicated that zinc concentration and time of addition counter-influence peak viable cell density and antibody production. Meanwhile, early copper supplementation influenced late-stage ROS activity in a dose-dependent manner likely by alleviating cellular oxidative stress. Regression coefficients indicated that combined metal addition had less significant impact on titer and specific productivity compared to zinc addition alone, although titer increased the most under combined metal addition. Glycan analysis showed that combined metal addition reduced galactosylation to a greater extent than single metals when supplemented during the early growth phase. A validation experiment was performed to confirm the validity of the regression model by testing an optimized setpoint of metal supplement time and concentration to improve protein productivity.

Potential issues specific to cytotoxicity tests of cellulose nanofibrils

Cellulose nanofibrils (also called cellulose nanofibers or nanofibrillated cellulose [CNFs]) are novel polymers derived from biomass with excellent physicochemical properties and various potential applications. However, the introduction of such new materials into the market requires thorough safety studies to be conducted. Recently, toxicity testing using cultured cells has attracted attention as a safety assessment that does not rely on experimental animals. This article reviews recent information regarding the cytotoxicity testing of CNFs and highlights the issues relevant to evaluating tests. In the literature, we found that a variety of cell lines and CNF exposure concentrations was evaluated. Furthermore, the results of cytotoxicity results tests differed and were not necessarily consistent. Numerous reports that we examined had not evaluated endotoxin/microbial contamination or the interaction of CNFs with the culture medium used in the tests. The following potential specific issues involved in CNF in vitro testing, were discussed: (1) endotoxin contamination, (2) microbial contamination, (3) adsorption of culture medium components to CNFs, and (4) changes in aggregation/agglomeration and dispersion states of CNFs resulting from culture medium components. In this review, the available measurement methods and solutions for these issues are also discussed. Addressing these points will lead to a better understanding of the cellular effects of CNFs and the development of safer CNFs.

Rapid metal speciation of cell culture media using reversed-phase separations and inductively coupled plasma optical emission spectrometry

Cell culture media metal content is critical in mammalian cell growth and monoclonal antibody productivity. The variability in metal concentrations has multiple sources of origin. As such, there is a need to analyze media before, during, and after production. Furthermore, it is not the simple presence of a given metal that can impact processes, but also their chemical form that is, speciation. To a first approximation, it is instructive to simply and quickly ascertain if the metals exist as inorganic (free metal) ions or are part of an organometallic complex (ligated). Here we present a simple workflow involving the capture of ligated metals on a fiber stationary phase with passage of the free ions to an inductively coupled plasma optical emission spectrometry for quantification; the captured species are subsequently eluted for quantification. This first level of speciation (free vs. ligated) can be informative towards sources of contaminant metal species and means to assess bioreactor processes.

Copper impurity of iron raw material contributes to improved cell culture performance

Cell culture medium (CCM) formulations are chemically defined to reduce lot‐to‐lot variability and complexity of the medium while still providing all essential nutrients supporting cell growth and productivity of various cell lines. However, raw material impurities may still introduce variations and inconsistencies to final CCM formulations. In one of our previous studies (Weiss et al. Biotechnol Prog. 2021;37(4):e3148), we have demonstrated the impact of iron raw material impurity on Chinese hamster ovary (CHO) cell performance and critical quality attributes (CQAs) of recombinant proteins within the Cellvento® 4CHO CCM platform by identifying manganese impurity as the main root cause for improved cell performance and altered glycosylation profiles. This study sought to investigate the impact of iron raw material impurities within another medium platform, namely EX‐CELL® Advanced CHO Fed‐Batch‐Medium. As opposed to previously published results, in this platform, copper instead of manganese impurity present within the used ferric ammonium citrate (FAC) iron source was responsible for an improved cell performance of a CHOZN® cell line and a slight difference in CQAs of the produced recombinant protein. The use of tightly controlled raw material specifications or the use of low impurity iron sources is therefore crucial to minimize the impact of impurities on cell performance in any CCM platform and thereby guarantee consistent and reproducible cell culture processes.

Degradation Products of Tryptophan in Cell Culture Media: Contribution to Color and Toxicity

Biomanufacturing processes may be optimized by storing cell culture media at room temperature, but this is currently limited by their instability and change in color upon long-term storage. This study demonstrates that one of the critical contributing factors toward media browning is tryptophan. LC-MS technology was utilized to identify tryptophan degradation products, which are likely formed primarily from oxidation reactions. Several of the identified compounds were shown to contribute significantly to color in solutions but also to exhibit toxicity against CHO cells. A cell-culture-compatible antioxidant, a-ketoglutaric acid, was found to be an efficient cell culture media additive for stabilizing components against degradation, inhibiting the browning of media formulations, and decreasing ammonia production, thus providing a viable method for developing room-temperature stable cell culture media.

Effect of iron addition on mAb productivity and oxidative stress in Chinese hamster ovary culture

Trace metals play a critical role in the development of culture media used for the production of therapeutic proteins. Iron has been shown to enhance the productivity of monoclonal antibodies during Chinese hamster ovary (CHO) cell culture. However, the redox activity and pro-oxidant behavior of iron may also contribute toward the production of reactive oxygen species (ROS). In this work, we aim to clarify the influence of trace iron by examining the relationship between iron supplementation to culture media, mAb productivity and glycosylation, and oxidative stress interplay within the cell. Specifically, we assessed the impacts of iron supplementation on (a) mAb production and glycosylation; (b) mitochondria-generated free hydroxyl radicals (ROS); (c) the cells ability to store energy during oxidative phosphorylation; and (d) mitochondrial iron concentration. Upon the increase of iron at inoculation, CHO cells maintained a capacity to rebound from iron-induced viability lapses during exponential growth phase and improved mAb productivity and increased mAb galactosylation. Fluorescent labeling of the mitochondrial hydroxyl radical showed enhanced environments of oxidative stress upon iron supplementation. Additional labeling of active mitochondria indicated that, despite the enhanced production of ROS in the mitochondria, mitochondrial membrane potential was minimally impacted. By replicating iron treatments during seed train passaging, the CHO cells were observed to adapt to the shock of iron supplementation prior to inoculation. Results from these experiments demonstrate that CHO cells have the capacity to adapt to enhanced environments of oxidative stress and improve mAb productivity and mAb galactosylation with minimal perturbations to cell culture.

Impact of iron raw materials and their impurities on CHO metabolism and recombinant protein product quality

Cell culture medium (CCM) composition affects cell growth and critical quality attributes (CQAs) of monoclonal antibodies (mAbs) and recombinant proteins. One essential compound needed within the medium is iron because of its central role in many cellular processes. However, iron is also participating in Fenton chemistry leading to the formation of reactive oxygen species (ROS) causing cellular damage. Therefore, this study sought to investigate the impact of iron in CCM on Chinese hamster ovary (CHO) cell line performance, and CQAs of different recombinant proteins. Addition of either ferric ammonium citrate (FAC) or ferric citrate (FC) into CCM revealed major differences within cell line performance and glycosylation pattern, whereby ammonium was not involved in the observed differences. Inductively coupled plasma mass spectrometry (ICP‐MS) analysis identified varying levels of impurities present within these iron sources, and manganese impurity rather than iron was proven to be the root cause for increased cell growth, titer, and prolonged viability, as well as altered glycosylation levels. Contrary effects on cell performance and protein glycosylation were observed for manganese and iron. The use of low impurity iron raw material is therefore crucial to control the effect of iron and manganese independently and to support and guarantee consistent and reproducible cell culture processes.

Quantitative trace metal determinations in cell culture media using LS-APGD-MS and ICP-OES with free/bound species differentiation following polymer fiber separations

Liquid sampling-atmospheric pressure glow discharge-mass spectrometry (LS-APGD-MS) and inductively coupled plasma-optical emission spectroscopy (ICP-OES) were employed for the quantification of trace metals in cell culture media and their capabilities compared. The LS-APGD is interfaced here to a compact mass spectrometer (Advion CMS) towards the development of an at-bioreactor process monitoring strategy. Both techniques have been previously employed for the quantification of trace metals in samples of various complexities, making them a natural choice for this application. They have also demonstrated comparable analytical figures of merit including limits of detection (LOD), matrix tolerance, etc. While cell culture media is a complex sample, the ICP-OES technique was unaffected by the matrix. However, the LS-APGD-MS suffered from increases in spectral background. Despite this, both techniques achieved appropriate LODs for all metals analyzed in this work (Cu, Fe, Zn, Co, Mn, Ni; LOD < 100 ng mL^-1), except for Mn and Ni via LS-APGD-MS. To overcome the increased background seen on the LS-APGD-MS, a capillary channeled polymer (C-CP) polypropylene (PPY) fiber stationary phase was employed as an on-line separation for the removal of organic components prior to sample introduction into the plasma. It was further determined that Ni was retained on the column, preventing the detection of this element via LS-APGD-MS, and insights into metal speciation were discussed. Following implementation of this on-line separation strategy, the agreement between the techniques was acceptable for all analytes, and was excellent for Cu, Fe, and Zn.

Impacts on product quality attributes of monoclonal antibodies produced in CHO cell bioreactor cultures during intentional mycoplasma contamination events

A mycoplasma contamination event in a biomanufacturing facility can result in costly cleanups and potential drug shortages. Mycoplasma may survive in mammalian cell cultures with only subtle changes to the culture and penetrate the standard 0.2‐µm filters used in the clarification of harvested cell culture fluid. Previously, we reported a study regarding the ability of Mycoplasma arginini to persist in a single‐use, perfusion rocking bioreactor system containing a Chinese hamster ovary (CHO) DG44 cell line expressing a model monoclonal immunoglobulin G 1 (IgG1) antibody. Our previous work showed that M. arginini affects CHO cell growth profile, viability, nutrient consumption, oxygen use, and waste production at varying timepoints after M. arginini introduction to the culture. Careful evaluation of certain identified process parameters over time may be used to indicate mycoplasma contamination in CHO cell cultures in a bioreactor before detection from a traditional method. In this report, we studied the changes in the IgG1 product quality produced by CHO cells considered to be induced by the M. arginini contamination events. We observed changes in critical quality attributes correlated with the duration of contamination, including increased acidic charge variants and high mannose species, which were further modeled using principal component analysis to explore the relationships among M. arginini contamination, CHO cell growth and metabolites, and IgG1 product quality attributes. Finally, partial least square models using NIR spectral data were used to establish predictions of high levels (≥10⁴ colony‐forming unit [CFU/ml]) of M. arginini contamination, but prediction of levels below 10⁴ CFU/ml were not reliable. Contamination of CHO cells with M. arginini resulted in significant reduction of antibody product quality, highlighting the importance of rapid microbiological testing and mycoplasma testing during particularly long upstream bioprocesses to ensure product safety and quality.

Elemental metal variance in cell culture raw materials for process risk profiling

Elemental metals are critical raw material attributes which can impact cell culture performance and associated therapeutic protein product quality profiles. Metals such as copper and manganese act as cofactors and reagents for numerous metabolic pathways which govern cell growth, protein expression, and glycosylation, thus mandating elemental monitoring. The growing complexity of modern cell culture media formulations adds additional opportunities for elemental variance and its associated impact risks. This article describes an analytical technique applying inductively coupled plasma mass spectrometry to characterize a list of common raw materials and media powders used in mammalian cell culture and therapeutic protein production. We aim to describe a method qualification approach suitable for biopharmaceutical raw materials. Furthermore, we present detailed profiles of many common raw materials and discuss trends in raw material subtypes. Finally, a case study demonstrating the impact of an unexpected source of raw material variation is presented along with recommendations for raw material elemental risk profiling and control.

Consequences of trace metal variability and supplementation on Chinese hamster ovary (CHO) cell culture performance: A review of key mechanisms and considerations

Trace metals are supplied to chemically-defined media (CDM) for optimal Chinese hamster ovary (CHO) cell culture performance during the production of monoclonal antibodies and other therapeutic proteins. However, lot-to-lot and vendor-to-vendor variability in raw materials consequently leads to an imbalance of trace metals that are supplied to CDM. This imbalance can yield detrimental effects rooted in several primary mechanisms and pathways including oxidative stress, apoptosis, lactate accumulation, and unfavorable glycan synthesis. Recent research endeavors involve supplying zinc, copper, and manganese to CDM in excess to further maximize culture productivity and product quality. These treatments significantly impact critical quality attributes and furthermore highlight the degree to which trace metal availability can affect CHO cell culture performance. This review highlights the role of trace metal variability, supplementation, and interplay on key cellular mechanisms responsible for overall culture performance and the production and quality of therapeutic proteins.