Efficient extraction of flavonoids from Flos Sophorae Immaturus by tailored and sustainable deep eutectic solvent as green extraction media

Application of deep eutectic solvents on extraction of flavonoids

Deep eutectic solvents (DESs), as a new type of eco-friendly solvent, have attracted increasing attention on the extraction and separation of flavonoid compounds from various samples, owing to their excellent properties such as biodegradability and ease of handling with very low toxicity. This article provides a status review of the applications of DESs in the extraction of flavonoids, including the introduction of flavonoid compounds, the properties and superiority of DESs, and extraction methods (ultrasonic-assisted extraction, heating reflux extraction, matrix solid-phase dispersion, and solid-phase extraction). Finally, prospects and challenges in the application of DESs on extraction and separation are extensively elucidated and critically reviewed.

Research Progress on Extraction and Detection Technologies of Flavonoid Compounds in Foods

Flavonoid compounds have a variety of biological activities and play an essential role in preventing the occurrence of metabolic diseases. However, many structurally similar flavonoids are present in foods and are usually in low concentrations, which increases the difficulty of their isolation and identification. Therefore, developing and optimizing effective extraction and detection methods for extracting flavonoids from food is essential. In this review, we review the structure, classification, and chemical properties of flavonoids. The research progress on the extraction and detection of flavonoids in foods in recent years is comprehensively summarized, as is the application of mathematical models in optimizing experimental conditions. The results provide a theoretical basis and technical support for detecting and analyzing high-purity flavonoids in foods.

Sustainable ultrasound-assisted extraction of Polygonatum sibiricum saponins using ionic strength-responsive natural deep eutectic solvents

The sustainable extraction of saponins was investigated using natural deep eutectic solvents (NADESs) combined with ultrasound-assisted extraction. A novel NADES (butyric acid-urea) that was responsive to ionic strength was designed and used as the extractant. Ultrasound treatment and a catalyst ferric chloride with plant cell wall breaking function were applied to improve the extraction efficiency.Since the solubility of the NADES varied significantly with ionic strength, 95% of NADES was readily separated from the water phase after the addition of sodium chloride, while saponins remained in the water phase for easy collection. The reuse capacity of NADES, the eco-friendliness of the extraction method, and the antioxidant activity of the extract were further evaluated.NADES was continuously recovered and used to extract Polygonatum sibiricum powder: the yield of saponins did not decrease after five cycles of recovery and re-extraction. The penalty point on the "Eco-scale" suggested that the extraction method was "green" (i.e. eco-friendly).Compared with ethanol extracts, the NADES extracts showed a higher saponin concentration and antioxidant activity.The study can contribute to the sustainable and green extraction of hydrophilic active substances in the food and pharmaceutical industries.

Study on Purification, Identification and Antioxidant of Flavonoids Extracted from Perilla leaves

The flavonoids from Perilla leaves were extracted using flash extraction assisted by ultrasonic extraction with ethanol. Subsequently, macroporous resin was employed for the isolation and purification of these flavonoids, followed by an investigation into their antioxidant activity. The process conditions for the extraction of flavonoids from Perilla leaves were designed and optimized using a one-way experiment combined with a response surface methodology. The optimal extraction conditions were determined as follows: the liquid-solid ratio was 20:1, ethanol volume fraction of 60%, ultrasound temperature of 60 °C, ultrasound time of 10 min and flash evaporation time of 60 s. The optimal extraction rate of flavonoids is 9.8 mg/g. In terms of separation and purification, a high-performance macroporous resin (HPD450 resin) with high purification efficiency was selected through static analysis and adsorption experiments. The optimal enrichment conditions were as follows: loading concentration of 0.06 mg/mL, optimal loading concentration of 20 mL, elution concentration of 70% and 76 mL, providing a reference for the further development and utilization of Perilla leaf flavonoids.

Functional characterization of two efficient glycosyltransferases catalysing the formation of rutin from Sophora japonica L

Two efficient and selective glycosyltransferases were identified from Sophora japonica L. Sj3GT could regio-selectively catalyse 3-O-glucosylation of quercetin to produce isoquercitrin, and Sj6''RhaT could further catalyse its 6''-O-rhamnosylation to generate rutin. It is particularly noteworthy that Sj6''RhaT shows high sugar donor selectivity towards UDP-rhamnose.

Reaction of the Phytochemistry Community to Green Chemistry: Insights Obtained Since 1990

This review article aims to study how phytochemists have reacted to green chemistry insights since 1990, the year when the U.S. Environmental Protection Agency launched the "Pollution Prevention Act". For each year in the period 1990 to 2019, three highly cited phytochemistry papers that provided enough information about the experimental procedures utilized were sampled. The "greenness" of these procedures was assessed, particularly for the use of solvents. The highly hazardous diethyl ether, benzene, and carbon tetrachloride did not appear in the papers sampled after 2010. Advances in terms of sustainability were observed mainly in the extraction stage. Similar progress was not observed in purification procedures, where chloroform, dichloromethane, and hexane regularly have been employed. Since replacing such solvents in purification procedures should be a major goal, potential alternative approaches are discussed. Moreover, some current initiatives toward a more sustainable phytochemical research considering aspects other than only solvents are highlighted. Although some advances have been achieved, it is believed that natural products chemists can play a major role in developing a novel ecological paradigm in chemistry. To contribute to this objective, six principles for performing natural products chemistry consistent with the guidelines of green chemistry are proposed.

Hydrothermal treatment improves xanthine oxidase inhibitory activity and affects the polyphenol profile of Flos Sophorae Immaturus

BACKGROUND

Flos Sophorae Immaturus (FSI) is rich in polyphenols and a potential uric acid-lowering food. However, the processing of FSI is greatly restricted due to the heat sensitivity and low solubility of polyphenols. In this study, hydrothermal treatment - an effective strategy - was applied to FSI processing. The variation of xanthine oxidase (XO) inhibitory effect and polyphenol composition of FSI during hydrothermal treatment were recorded.

RESULTS

The XO inhibition rate of FSI increased from 32.42% to 89.00% after hydrothermal treatment at 220 °C for 30 min, as well as total polyphenols (from 0.66 to 1.11 mg mL^-1 ) and flavonoids (from 1.21 to 1.58 mg mL^-1 ). However, high thermal temperature (>160 °C) and extended thermal time (>90 min) caused the degradation of polyphenols. Rutin, kaempferol-3-O-rutinoside and narcissoside rapidly degraded and converted to quercetin, kaempferol and isorhamnetin when the temperature exceeded 160 °C. The maximum yields of quercetin, kaempferol and isorhamnetin were at 220 °C for 30 min, 90 min and 90 min, respectively. Meanwhile, the conversion kinetics conformed to the first-order model. Interestingly, these newly formed polyphenols possessed better XO inhibitory effects than their derivatives with 3-O-rutinoside.

CONCLUSION

Polyphenol conversion during hydrothermal treatment was the main reason for enhancing XO inhibitory activity. Therefore, hydrothermal treatment is an appropriate method for improving the XO inhibitory effect of FSI. © 2022 Society of Chemical Industry.

Efficient Extraction of Flavonoids from Lotus Leaves by Ultrasonic-Assisted Deep Eutectic Solvent Extraction and Its Evaluation on Antioxidant Activities

The discovery of a green extraction solvent for natural plants could promote related research. In this study, deep eutectic solvents (DES) were used as green solvents coupled with an ultrasound-assisted extraction method (UAE) to extract flavonoids from lotus leaves. Thirty-four different DES were performed and choline chloride/urea with 40% water was chosen as the most promising one, and the related parameters in the procedures were optimized, resulting in the highest extraction amount of flavonoids in lotus leaves. D-101 was selected from four macroporous resins to separate the flavonoids from DES. Moreover, DES could be recycled and efficiently reused four times with satisfactory performances. In addition, the lotus leaf flavonoids from the DES extract exhibited antioxidant activities in five kinds of assays including DPPH, ABTS, Fe3+ reducing, FRAP, and Fe2+ chelating. It also showed antibacterial activities on Staphylococcus aureus and Escherichia coli bacterial strains with minimal inhibitory concentrations at 1666 μg/mL and 208 μg/mL, respectively. In the HPLC analysis, the three main components in the DES extract were identified as astragalin, hyperoside, and isoquercitrin. In conclusion, the developed UAE-DES followed by macroporous resin treatment could become an efficient and environmentally friendly extraction and enrichment method for flavonoids from lotus leaves and other natural products.

Nutritional Attributes and Phenolic Composition of Flower and Bud of Sophora japonica L. and Robinia pseudoacacia L

Sophora japonica L. (SJL) and Robinia pseudoacacia L. (RPL) are widely cultivated in China. However, the utilization of their main by-products are limited due to a lack of comprehensive nutritional attributes. Herein, the proximate composition, mineral elements, fatty acids, amino acids, monosaccharides, and phenolics were analyzed to investigate the nutritional attributes of SJL and RPL. Dietary fiber was the main ingredient in SJL and RPL, followed by protein and lipids. The content of Fe in SJL and RPL was highest, especially in flowers of SJL, reaching about 1179.51 mg/kg. The total unsaturated fatty acids accounted for 89.67% of the bud of SJL. Meanwhile, the essential amino acids contents of the flower and bud of SJL and RPL accounted for 35.95-40.59% of total amino acids. The flower of SJL (373.75 mg/g) exhibited the most abundant monosaccharides. Meanwhile, the total phenolics and flavonoid contents in the buds of SJL and RPL were significantly higher than that of the flower, implying the buds possessed better biological activity. Moreover, the bud of SJL possessed the most abundant phenolics. The results provided a reference for the development of functional food derived from SJL and RPL.

Deep eutectic solvents: Recent advances in fabrication approaches and pharmaceutical applications

Deep eutectic solvents (DESs) have received increasing attention in the past decade owing to their distinguished properties including biocompatibility, tunability, thermal and chemical stability. Particularly, DESs have joined forces in pharmaceutical industry, not only to efficiently separate actives from natural products, but also to dramatically increase solubility and permeability of drugs, both are critical for the drug absorption and efficacy. As a result, lately DESs have been extensively and practically adopted as versatile drug delivery systems for different routes such as nasal, transdermal and oral administration with enhanced bioavailability. This review summarizes the emerging progress of DESs by introducing applied fabrication approaches with advantages and limitations thereof, and by highlighting the pharmaceutical applications of DESs.

Chemical Characterization and Metabolic Profiling of the Compounds in the Chinese Herbal Formula Li Chang Decoction by UPLC-QTOF/MS

Background

Li Chang decoction (LCD), a Chinese medicine formula, is commonly used to treat ulcerative colitis (UC) in clinics.

Purpose

This study aimed to identify the major components in LCD and its prototype and metabolic components in rat biological samples.

Methods

The chemical constituents in LCD were identified by establishing a reliable ultra-performance liquid chromatography coupled with quadrupole time-of-flight tandem mass spectrometry (UPLC-QTOF/MS) method. Afterwards, the rats were orally administered with LCD, and the biological samples (plasma, urine, and feces) were collected for further analyzing the effective compounds in the treatment of UC.

Result

A total of 104 compounds were discriminated in LCD, including 26 flavonoids, 20 organic acids, 20 saponins, 8 amino acids, 5 oligosaccharides, 5 tannins, 3 lignans, 2 alkaloids, and 15 others (nucleosides, glycosides, esters, etc.). About 50 prototype and 94 metabolic components of LCD were identified in biological samples. In total, 29 prototype components and 22 metabolic types were detected in plasma. About 27 prototypes and 96 metabolites were discriminated in urine, and 34 prototypes and 18 metabolites were identified in feces.

Conclusion

The flavonoids, organic acids, and saponins were the major compounds of LCD, and this study promotes the further pharmacokinetic and pharmacological evaluation of LCD.

Application of an alkali destruction technique and natural deep eutectic solvent for greener extraction from peanut shells: optimization and extraction kinetics study

Peanut shells are an agricultural by-product rich in flavonoids, but their utilization is not high at present. This research developed a method for the rational utilization of flavonoids in peanut shells, which could enhance the comprehensive utilization of peanut resources. A green and efficient natural extraction technique based on a natural deep eutectic solvent (NADES) and alkaline destruction was exploited for the extraction of the flavonoids from peanut shells. NADES synthesized with DL-menthol (Me) and DL-lactic acid (LA) was selected as the solvent. KOH was used as a destructive agent that could destroy the structure of Me/LA, which could aid not only recovering the flavonoids, but also aid Me recovery and recycling. The NADES with the molar ratio of Me to LA of 1 : 4 showed a higher extraction capacity for flavonoids and better maintenance of antioxidant activity than water and ethanol. The maximum extraction efficiency was 23.33 mg rutin equivalents per g. In addition, the mass-transfer kinetics model of flavonoids extraction was established using Fick's second law, which well fitted the experimental results and proved that the temperature had a significant effect on the extraction efficiency. These results offered some insights for the research and exploitation of an environmentally friendly method to extract bio-active flavonoids for future applications in actual industrial manufacturing.

Medicinal Importance, Pharmacological Activities and Analytical Aspects of a Flavonoid Glycoside 'Nicotiflorin' in the Medicine

BACKGROUND

Herbal products are derived from different natural sources, mainly used as a source of food material and medicine in the health sectors since ancient times. Herbal products have gained popularity in modern medicine due to their beneficial health properties and pharmacological activities. Flavonoids are an important class of secondary metabolites found to be present in medicinal plants and their derived products. Flavonoids have been known for their anti-allergic, anti-bacterial, anti-diabetic, anti-inflammatory, anti-viral, anti-proliferative, anti-mutagenic, antithrombotic, anti-carcinogenic, anti-oxidant and hepatoprotective activities in the medicine. Nicotiflorin is a flavonoidal class phytochemical, found in medicinal plants, including Traditional Chinese medicine.

METHODS

Scientific data on the medicinal importance and pharmacological activities of nicotiflorin have been collected and analyzed in the present work in order to know the therapeutic importance of nicotiflorin in medicine. Scientific data have been collected from Google, Google Scholar, Science Direct, PubMed and Scopus and analyzed in the present work. Analytical techniques data of separation, isolation and identification of nicotiflorin have also been collected and presented in the current work. Further biological importance of flavonoidal class phytochemicals was also discussed in the present work to understand the biological importance of nicotiflorin in medicine as it belongs to the flavonoid class.

RESULTS

Scientific data analysis revealed the therapeutic importance and pharmacological activities of nicotiflorin. Nicotiflorin has significant biological potential against coronavirus, ischemia, renal impairment, hepatic complication, memory dysfunction and myocardial infarction. The biological potential of nicotiflorin against α-glucosidase and α-amylase enzymes, multiple myeloma cells and insulin secretion has also been discussed in the present work. Analytical data revealed the significance of modern analytical tools in medicine for the isolation, separation and quantification of nicotiflorin.

CONCLUSION

Scientific data analysis of different research works revealed the biological importance and therapeutic potential of nicotiflorin in medicine.

Optimization of the extraction process of flavonoids from Trollius ledebouri with natural deep eutectic solvents

In recent years, natural deep eutectic solvents have been favored greatly due to their environment friendly, mild biological toxicity and simple biodegradability. Natural deep eutectic solvents gradually applied for the extracting bioactive compounds from natural products efficiently. In this study, 20 natural deep eutectic solvents were prepared and their physical and chemical properties were tested. The ultrasonic-assisted extraction method was used to extract flavonoids from Trollius ledebouri and high-performance liquid chromatography-ultraviolet was applied to examine two main bioactive flavonoids (orientin and vitexin). Compared with traditional solvents (water and 60% ethanol solution), natural deep eutectic solvents composed of L(-)-proline and levulinic acid (molar ratio 1:2) show a super extraction efficiency. On this basis, the response surface method was used to optimize the extraction temperature, extraction time, water contents, and solid-liquid ratio. As a consequence, the extraction temperature 60℃, extraction time 18 min, water content 14% (v/v), and the solid-liquid ratio 48 mL·g^-1 were chosen as the best extraction process. This study shows that natural deep eutectic solvents can effectively extract flavonoids from T. ledebouri, laying a foundation for the further application of natural deep eutectic solvents to extract bioactive compounds from natural products.

Natural deep eutectic solvents as tailored and sustainable media for the extraction of five compounds from compound liquorice tablets and their comparison with conventional organic solvents

An efficient and environmentally friendly ultrasound-assisted (UAE) natural deep eutectic solvent (NADES) extraction method was applied for the extraction of five bioactive compounds (liquiritin, isoliquiritin, liquiritigenin, glycyrrhizic acid and isoliquiritigenin) from compound liquorice tablets (CPLTs), and the antioxidant activities of these compounds were evaluated. In this study, eighteen different NADES systems based on either two or three components were tested and a 1,4-butanediol–levulinic acid system (1 : 3 molar ratio) was selected as a topgallant solvent for maximizing analyte extraction yields. Various extraction parameters, such as water content, liquid/solid ratio, extraction time and temperature, were systematically optimized by single-factor and response surface methodology (RSM) experiments. The results indicated that the optimum extraction conditions for the analytes featured a water content of 17%, a liquid/solid ratio of 42 mL g⁻¹ and an extraction time of 30 min. The extracted amounts of liquiritin, isoliquiritin, liquiritigenin, glycyrrhizic acid and isoliquiritigenin reached 5.60, 3.17, 1.27, 74.62 and 1.34 mg g⁻¹, respectively, under optimized conditions, which were much higher than those extracted using conventional organic solvents. In addition, antioxidant tests revealed that the NADES extracts showed higher DPPH and hydroxyl radical-scavenging capacity than the conventional solvent extracts used for comparison. This study provides a suitable approach for efficiently extracting the bioactive compounds of CPLTs. Meanwhile, NADESs can be extended to other natural products as green extraction media.

A 1,4-butanediol–levulinic acid system was selected as a topgallant solvent and extraction parameters were optimized. NADES extracts exhibited higher extraction efficiency and in vitro antioxidant activities than conventional solvent extracts.

LC-Q-Orbitrap-MS/MS Characterization, Antioxidant Activity, and α-Glucosidase-Inhibiting Activity With In Silico Analysis of Extract From Clausena Indica (Datz.) Oliv Fruit Pericarps

Clausena indica (Datz.) Oliv fruit pericarps (CIOPs) is an important agro-industrial by-product rich in active components. In this article, the effects of traditional and green deep eutectic solvents (DESs) on the high-performance liquid chromatography (HPLC) characterization, antioxidant activities, and α-glucosidase-inhibitory activity of phenolic extracts from CIOPs were investigated for the first time. The results showed that ChCl-Gly and Bet-CA had higher extraction efficiency for the total phenolic content (TPC, 64.14-64.83 mg GAE/g DW) and total flavonoid content (TFC, 47.83-48.11 mg RE/g DW) compared with the traditional solvents (water, methanol, and ethyl acetate). LC-Q-Orbitrap-MS/MS was adopted to identify the phenolic compositions of the CIOPs extracts. HPLC-diode array detection (HPLC-DAD) results indicated that arbutin, (-)-epigallocatechin, chlorogenic acid, procyanidin B1, (+)-catechin, and (-)-epicatechin were the major components for all extracts, especially for deep eutectic solvents (DESs). In addition, ChCl-Xyl and ChCl-Gly extracts showed higher antioxidant activities against 2,2-diphenyl-1-picrylhydrazyl (DPPH^•), 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid (ABTS^+•), ferric reducing antioxidant power (FRAP), reducing power (RP), and cupric ion reducing antioxidant capacity (CUPRAC) than extracts extracted by other solvents. A strong α-glucosidase-inhibiting activity (IC₅₀, 156.25-291.11 μg/ml) was found in three DESs extracts. Furthermore, in silico analysis of the major phenolics in the CIOPs extracts was carried out to explore their interactions with α-glucosidase. Multivariate analysis was carried out to determine the key factors affecting the antioxidant activity and α-glucosidase-inhibiting activity. In short, DES can be taken as a promising solvent for valorization and recovery of bioactive compounds from agro-industrial by-products. The results verified that CIOPs can be used as a prospective source rich in bio-active compounds applied in the food and pharmacy industries.

Current Progress in Natural Deep Eutectic Solvents for the Extraction of Active Components from Plants

In the last decade, natural deep eutectic solvents (NADESs) have gained more and more attention due to their green, convenient preparation, low toxicity and biodegradability. It is widely used in various fields, especially in the extraction of active components from plants, formed by the combination of hydrogen bond donors (HBDs) and hydrogen bond acceptors (HBAs) at a certain condition. In this article, six preparation methods of NADESs were summarized and the interactions that occur in the eutectic behavior of NADES including hydrogen bonding, electrostatic interaction and van der Waals force were also reviewed. What is more, its significant extraction capacity on flavonoids, phenols, alkaloids and plant pigments endows its extensive applications in the extraction of active components from medicinal plants. Extraction factors including solvents properties (viscosity, carbon chain length, number of hydroxyl groups), extraction condition (water content, extraction temperature, extraction time, solid-liquid ratio), extraction method and recycling method were discussed. In addition, NADESs can also be combined with other technologies, like molecular imprinting, monolithic column, to achieve efficient and specific extraction of active ingredients. Further systematic studies on the biodegradability and biotoxicity are put forward to be urgent.

Review on Extraction of Phenolic Compounds from Natural Sources Using Green Deep Eutectic Solvents

For more sustainable and environmentally friendly scientific research, it is essential to apply green chemistry principles in all areas of science. A possible area in which green chemistry principles can significantly influence the productivity and the quality of the outcome is extraction of natural products. The conventional toxic solvents can be replaced by environmentally friendly solvents known as deep eutectic solvents, which fortunately, due to their unique properties, can significantly improve extraction efficiency. In this literature review, the extraction of a specific class of natural products, phenolic compounds, using different types of green deep eutectic solvents has been reviewed. Within this review, the composition of those solvents used to extract different types of phenolic compounds has been discussed. In addition, the factors affecting their extraction, extracting solvent component structure, molar ratio of extracting solvent components, extraction temperature, solid to extraction solvent ratio, and water content, have been evaluated.

Innovative Extraction Techniques Using Deep Eutectic Solvents and Analytical Methods for the Isolation and Characterization of Natural Bioactive Compounds from Plant Material

The growing interest of the food, pharmaceutical and cosmetics industries in naturally occurring bioactive compounds or secondary plant metabolites also leads to a growing demand for the development of new and more effective analysis and isolation techniques. The extraction of bioactive compounds from plant material has always been a challenge, accompanied by increasingly strict control requirements for the final products and a growing interest in environmental protection. However, great efforts have been made in this direction and today a considerable number of innovative extraction techniques have been developed using green, environmentally friendly solvents. These solvents include the deep eutectic solvents (DES) and their natural equivalents, the natural deep eutectic solvents (NADES). Due to their adjustable physical-chemical properties and their green character, it is expected that DES/NADES could be the most widely used solvents in the future, not only in extraction processes but also in other research areas such as catalysis, electrochemistry or organic synthesis. Consequently, this review provided an up-to-date systematic overview of the use of DES/NADES in combination with innovative extraction techniques for the isolation of bioactive compounds from various plant materials. The topicality of the field was confirmed by a detailed search on the platform WoS (Web of Science), which resulted in more than 100 original research papers on DES/NADES for bioactive compounds in the last three years. Besides the isolation of bioactive compounds from plants, different analytical methods are presented and discussed.

A Glimpse into the Extraction Methods of Active Compounds from Plants

Naturally active compounds are usually contained inside plants and materials thereof. Thus, the extraction of the active compounds from plants needs appropriate extraction methods. The commonly employed extraction methods are mostly based on solid-liquid extraction. Frequently used conventional extraction methods such as maceration, heat-assisted extraction, Soxhlet extraction, and hydrodistillation are often criticized for large solvent consumption and long extraction times. Therefore, many advanced extraction methods incorporating various technologies such as ultrasound, microwaves, high pressure, high voltage, enzyme hydrolysis, innovative solvent systems, adsorption, and mechanical forces have been studied. These advanced extraction methods are often better than conventional methods in terms of higher yields, higher selectivity, lower solvent consumption, shorter processing time, better energy efficiency, and potential to avoid organic solvents. They are usually designed to be greener, more sustainable, and environment friendly. In this review, we have critically described recently developed extraction methods pertaining to obtaining active compounds from plants and materials thereof. Main factors that affect the extraction performances are tuned, and extraction methods are chosen in line with the properties of targeted active compounds or the objectives of extraction. The review also highlights the advancements in extraction procedures by using combinations of extraction methods to obtain high overall yields or high purity extracts.

Utilization of green organic solvents in solvent extraction and liquid membrane for sustainable wastewater treatment and resource recovery-a review

Water pollution and depletion of natural resources have motivated the utilization of green organic solvents in solvent extraction (SX) and liquid membrane (LM) for sustainable wastewater treatment and resource recovery. SX is an old and established separation method, while LM, which combines both the solute removal and recovery processes of SX in a single unit, is a revolutionary separation technology. The organic solvents used for solute removal in SX and LM can be categorized into sole conventional, mixed conventional-green, and sole green organic solvents, whereas the stripping agents used for solute recovery include acids, bases, metal salts, and water. This review revealed that the performance of greener organic solvents (mixed conventional-green and sole green organic solvents) was on par with the sole conventional organic solvents. However, some green organic solvents may threaten food security, while others could be pricey. The distinctive extraction theories of various sole green organic solvents (free fatty acid-rich oils, triglyceride-rich oils, and deep eutectic solvents) affect their application suitability for a specific type of wastewater. Organic liquid wastes are among the optimal green organic solvents for SX and LM in consideration of their triple environmental, economic, and performance benefits.

Optimization of Ultrasound-Assisted Extraction Using Response Surface Methodology for Simultaneous Quantitation of Six Flavonoids in Flos Sophorae Immaturus and Antioxidant Activity

Ultrasound-assisted extraction (UAE) was applied to extract rutin (RU), nicotiflorin (NI), narcissoside (NA), kaempferol (KA), isorhamnetin (IS), quercetin (QU), and total flavonoids of Flos Sophorae Immaturus (TFFSI) from Flos Sophorae Immaturus (FSI). Through single factor test and response surface methodology (RSM), the optimal extraction conditions were concluded as follows: ethanol concentration 70%, time 30 min, temperature 61 °C, and liquid/solid ratio 15.30 mL/g, respectively. The actual extraction rates of RU, NI, NA, KA, IS, QU, and TFFSI were 14.6101%, 2.9310%, 7.1987%, 0.1041%, 0.4920%, 2.7998%, and 26.4260%, respectively. The experimental results demonstrated that the extraction method with accuracy and efficiency could be used for the comprehensive evaluation quality control of extracts from FSI. The antioxidant activities of hydroalcoholic extraction from FSI on 1,1-diphenyl-2-picrylhydrazyl (DPPH), 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS•⁺), superoxide anion (•O²⁻) free radicals, and ferric reducing/antioxidant power (FRAP) were assessed. The results showed that the antioxidation activities of extracts on DPPH, ABTS•⁺, and •O²⁻ free radicals were reached 89.29%, 97.86%, and 56.61%, and 81.4% in FRAP at 1.0 mg/mL, respectively. The antioxidant capacity of FSI extract was positively correlated with the amount of total flavonoids.

Air-assisted liquid-liquid microextraction based on solidification of floating deep eutectic solvent for the analysis of ultraviolet filters in water samples by high performance liquid chromatography with the aid of response surface methodology

For this work, a novel air-assisted liquid-liquid microextraction based on solidification of floating deep eutectic solvent (AA-LLME-SFDES), coupled with a high performance liquid chromatography (HPLC) method was developed for the detection of benzophenone and salicylate ultraviolet filters in water samples. Three types of fatty acid-based hydrophobic deep eutectic solvents (DESs) with low viscosity, low-density, and melting point close to room temperature were prepared and employed as extraction solvents. This air-assisted liquid-liquid microextraction was carried out in a glass centrifuge tube. Subsequently, the glass tube was introduced into ice-water bath and held for 3 min, during which the upper DES phase was solidified. The water phase was easily extracted using a syringe equipped with a long needle, and later, the glass tube was removed from ice-water bath. The solidified DES phase was immediately melted at room temperature and used for HPLC analysis. The response surface methodology was employed to optimize some influencing parameters such as the volume of the extraction solvent, the pH value of sample solution, the number of extraction cycles, and the addition of salt. A quadratic model, namely a central composite design, was used to replace the conventional single factor analysis. It was found that under optimal conditions, the limits of determination and quantification were 0.045-0.54 µg L^-1 and 0.15-2.0 µg L^-1, respectively. The relative standard deviations for inter-day (n = 5) and intra-day (n = 5) precision were ≤ 4.2%, whereas the enrichment factors for the ultraviolet filters were obtained from 41 to 50. Furthermore, this novel method was successfully employed for the detection of benzophenone and salicylate ultraviolet filters from real water samples. The recoveries ranged from 87.5% to 105.8%, whereas the RSDs were lower than 3.6%.

Deep Eutectic Solvents as Extraction Media for Valuable Flavonoids from Natural Sources

The present review article attempts to summarize the use of deep eutectic solvents in the extraction of flavonoids, one of the most important classes of plant secondary metabolites. All of the applications reviewed have reported success in isolation and extraction of the target compounds; competitive, if not superior, extraction rates compared with conventional solvents; and satisfactory behavior of the extract in the latter applications (such as direct analysis, synthesis, or catalysis), wherever attempted.