Development, validation and application of a new HPLC-DAD method for simultaneous quantification of apixaban, dabigatran, edoxaban and rivaroxaban in human plasma

Detection and quantification of Amatoxin in wild mushrooms from North-East India using HPLC-PDA method for food safety purposes

Misidentification and ingestion of poisonous mushrooms pose significant threats to food safety, particularly in Mizoram, India, where over ten fatalities due to mushroom poisoning have been reported in the past decade (2013-2023). This study aimed to address this critical issue by identifying and quantifying the cause of death due to consumption of wild mushroom from Champhai district, Mizoram, India and to test the reliability of HPLC-PDA for detection and quantification of amatoxins. HPLC-PDA confirmed the presence of α-amanitin in Amanita virosa and Amanita bisporigera in the samples. α-amanitin is a water-soluble, heat-stable, and highly toxic cyclic octapeptide present in the genus Amanita, which includes Amanita phalloides, Amanita verna, and Amanita virosa. Amanitin cytotoxicity arises from the inhibition of RNA polymerases, namely RNA polymerase II, which obstructs mRNA production in kidney and liver cells. Validation of the method demonstrated good precision and accuracy, with LOD and LOQ values of 88 ng g-1 and 210 ng g-1, respectively. The method was successfully applied to quantify α-amanitin in ten wild mushroom samples, revealing its presence only in Amanita virosa (1.17 mg g-1) and Amanita bisporigera (1.91 mg g-1) species. These findings underscore the importance of accurate α-amanitin detection methods in ensuring food safety and public health, particularly in regions prone to mushroom poisoning incidents. It is noteworthy that this study marks the initial exploration for detection and quantification of α-amanitin from poisonous mushrooms found in the wild regions of Champhai district in Mizoram, representing the first report of such in the area.

Bleeding Events Associated with Rivaroxaban Therapy in Naive Patients with Nonvalvular Atrial Fibrillation: A Longitudinal Study from a Genetic Perspective with INR Follow-Up

Background and Objectives: Rivaroxaban is a direct-acting anticoagulant used to prevent stroke in patients with atrial fibrillation. Rivaroxaban is a substrate for P-glycoprotein, which is encoded by the ABCB1 gene. Rivaroxaban is also metabolized by the CYP3A5 gene. Therefore, the current study is carried out to study the effects of polymorphisms in the ABCB1 and CYP3A5 genes, which may affect the plasma levels of rivaroxaban, with subsequent clinical outcomes (bleeding events) associated with the therapy. Materials and Methods: The study was conducted on 66 naive patients with atrial fibrillation treated with rivaroxaban. Blood samples of rivaroxaban were taken at 3 h and after 1 month following the administration of the drug to measure plasma levels. The blood level of rivaroxaban was measured with an HPLC-UV detector. Sanger sequencing was used to find polymorphisms in the targeted genes. Coagulation parameters were measured at 3 h and after 1 month of administration of rivaroxaban. Frequencies of bleeding events were recorded throughout the one-month course of drug therapy. Results: The heterozygous and homozygous mutant genotypes of ABCB1 (rs2032582, rs1045642, rs1128503, and rs4148738) and CYP3A5 (rs776746) showed lower plasma concentrations as compared to the wild-type genotype. ABCB1 (rs2032582, rs1045642, rs1128503, and rs4148738) and CYP3A5 (rs776746) gene polymorphisms had a statistically significant impact on the plasma concentration of rivaroxaban among the heterozygous and homozygous mutant genotypes compared to the wild-type genotype. The heterozygous variant of ABCB1 and homozygous variant of CYP3A5 suffered more events of bleeding. Conclusions: It was concluded that ABCB1 (rs2032582, rs1045642, rs1128503, and rs4148738) and CYP3A5 (rs776746) gene polymorphisms had a significant impact on the plasma levels of rivaroxaban in patients treated for atrial fibrillation on day three as well as after one month of the therapy. The lowest plasma levels were observed in patients with a homozygous variant of ABCB1 (rs2032582, rs1045642, or rs4148738) along with the CYP3A5*1/*3 allele. The heterozygous variant of ABCB1 SNPs and homozygous variant of CYP3A5 SNPs suffered more events of bleeding.

Development and validation of an ultrafast method of quantification of rivaroxaban in human serum using laser diode thermal desorption coupled to triple quadrupole mass spectrometry

RATIONALE

Rivaroxaban is an anticoagulant prescribed to patients who are at risk of medical conditions such as deep-vein thrombosis, pulmonary embolisms, and strokes caused by blood clots. The administration of this drug is monitored to adjust the dosage and evaluate patients' blood concentration. Rapid quantification of this drug in plasma could make it possible to ensure that the dose present in the blood of patients does not represent a danger for the medical intervention to be carried out.

METHODS

Liquid chromatography-tandem mass spectrometry is usually employed to quantify rivaroxaban in blood, plasma, and serum. Here, an alternative method of analysis based on laser diode thermal desorption-triple quadrupole mass spectrometry (LDTD-QqQMS) was developed and comprehensively validated. This new method allows the quantification of rivaroxaban in less than 13 s from sample to sample. The extraction of rivaroxaban in human serum was done by a salting-out liquid-liquid extraction with acetonitrile and a saturated sodium chloride solution.

RESULTS

The proposed method allows the quantification of rivaroxaban in less than 13 s from sample to sample. During validation, all criteria were respected. The accuracy was <15% of the nominal value, the precision was <15%CV, and the recovery was ≥89.9%. There were no observed carryover or matrix effects. Analysis of the extracted samples established the stability of dry (24 h) and wet samples (1 week) when samples cannot be analyzed immediately, a considerable advantage in a clinical setting.

CONCLUSIONS

This method improves sample throughput by more than 1200% compared to liquid chromatography-tandem mass spectrometry methods of analysis of rivaroxaban and decreases analysis costs by reducing solvent consumption and instrument time.

Investigation of the electrochemical properties of edoxaban using glassy carbon and boron-doped diamond electrodes and development of an eco-friendly and cost effective voltammetric method for its determination

In this study, the highly risky drug Edoxaban (EDX), which can threaten life and cause bleeding, was electro analytically evaluated. The electrochemical behavior of EDX was investigated using glassy carbon electrode (GCE) and boron-doped diamond electrode (BDDE). In this study, for the first time, a simple, rapid, sensitive, and selective voltammetric technique was developed by using different electrodes for the electrochemical characterization and detection of EDX. The optimized voltammetric technique showed anodic signals of EDX at +1.09 V and +1.08 V on GCE and BDDE, respectively, in BR (pH 5.0) solution. The developed voltammetric method provided a very good analytical working range for EDX in BR (pH 5.0) solution on GCE and BDDE, covering concentration ranges from 1.84 μM to 12.88 μM and from 3.68 μM to 14.72 μM, respectively. The limits of detection for EDX on GCE and BDDE under these experimental conditions were calculated as 0.24 μM and 0.57 μM, respectively. The developed voltammetric methods on both electrodes were successfully applied to urine and tablet samples. Additionally, the obtained voltammetric results were compared with UV-Vis spectroscopy results.

Understanding the Stress Testing Characteristics of Apixaban, Structural Elucidation of a Novel Degradation Impurity, and Stability-Indicating Method Development for Quantification of Related Substances

BACKGROUND

People who have non-valvular atrial fibrillation may benefit from taking a new oral anticoagulant called apixaban, which has recently been given the green light by the U.S. Food and Drug Administration. During stress testing, apixaban was found to have a high degree of degradability when subjected to both acidic and basic conditions, and one significant unknown impurity was observed in addition to the major known impurities.

OBJECTIVE

Our aim is the isolation and characterization of degradation product observed in stress/forced degradation studies, and also the development of a single HPLC method that is both reliable and accurate for quantifying all 10 related impurities of apixaban.

METHODS

Preparative HPLC was used to isolate the degradation product, and 1H NMR, 13C NMR, and MS were used to elucidate the structure of the product. Additionally, a single reverse-phase (RP) HPLC method was developed for quantification of all related impurities of apixaban.

RESULTS

Based on the spectral characterization data, the identified unknown degradation impurity was found to be a pH-independent hydrolysis degradation impurity of apixaban. The developed method is specific, linear, accurate, robust, and rugged.

CONCLUSION

The isolated and characterized impurities were the same as those found during stress testing. The developed method has been validated for its intended purpose in accordance with the regulatory requirements that were outlined.

HIGHLIGHTS

The unknown impurity is a new apixaban degradation impurity that helps us understand its toxicity. The scientific community will benefit from the developed analytical method information as it relates to understanding drug product impurity profiling.

Sucrose acetate isobutyrate (SAIB) and glyceryl monooleate (GMO) hybrid nanoparticles for bioavailability enhancement of rivaroxaban: an optimization study

This study aims to improve the RXB bioavailability using hybrid nanoparticles. A modified melt dispersion technique created different formulas with varying GMO-SAIB: RXB and GMO: SAIB ratios, with fixed GMO-SAIB: poloxamer 407 ratios. The PS, PDI, ZP, and EE were measured to determine the optimal formula, which was selected using Design-Expert™ software. The optimized formula was lyophilized and tested for PS, PDI, ZP, and EE. The chosen lyophilized formula (L4) was characterized using FTIR, DSC, PXRD, dissolution studies, and pharmacokinetics studies. The study found correlations between variables and identified how GMO-SAIB concentration affects drug encapsulation. The dissolution parameters were calculated, including % Q5 and % DE). The % Q5 values were 68.4 ± 1.7% and 89.7 ± 3.6% for Xarelto and L4 tablets, respectively. The % DE values were 89.7 ± 0.4% and 97.5 ± 2.1% for Xarelto and L4 tablets, respectively. The AUC values were 2117.0 ng.h/mL (±77.3) and 3919.4 ng.h/mL (±134.8) for Xarelto and L4 tablets, respectively. The Cmax values were 241.3 ng/mL (±21.0) and 521.5 ng/mL (±91.5) for Xarelto and L4 tablets, respectively. In conclusion, the study found that using GMO-SAIB as co-formers effectively enhanced the bioavailability of RXB. The authors recommend using the hybrid nanoparticles technique and suggest further research to enhance its effectiveness for drug delivery.

Firstly electrochemical investigetions and determination of anticoagulant drug edoxaban at single-use pencil graphite electrode: an eco-friendly and cost effective voltammetric method

OBJECTIVES

The anticoagulant drug edoxaban has a blood thinning mechanism of action. In this study, a pencil graphite electrode was electrochemically activated at + 1.4 V for 60 s. in a Britton-Robinson (pH 9.0) supporting electrolyte solution.

EVIDENCE ACQUISITION

A simple, fast, and sensitive electrochemical procedure was developed using cyclic voltammetry and square wave voltammetry techniques. It was observed that edoxaban gave a good oxidation signal with cyclic voltammetry technique at a potential of + 0.98 V (vs. Ag/AgCl).

RESULTS

This procedure showed a linear response in a Britton-Robinson (pH 9.0) media within the concentration range of 0.2-1.8 µM and limit of detection (LOD) and the limit of quantification (LOQ) values were determined to be 0.073 μM (0.133 μg mL-1) and 0.243 μM (0.443 μg mL-1), respectively.

CONCLUSION

The method developed in this study was successfully applied to drug and urine samples. The developed voltammetric method was highly selective and gave satisfactory recovery results in urine and pharmaceutical samples. The results of the voltammetric method were compared with the spectroscopic method and it was determined that the results were compatible.

An eco-friendly ultra-performance liquid chromatography-mass spectrometry method for quantification of rivaroxaban and ticagrelor in rat plasma: grapefruit interactions

Aim: An eco-friendly ultra-performance liquid chromatography-tandem mass spectrometry method was developed to study the pharmacokinetics of rivaroxaban and ticagrelor in rat plasma, utilizing moxifloxacin as an internal standard. The food-drug interaction between grapefruit juice and these drugs was also investigated. Methods: Liquid-liquid extraction was used. A nonporous stationary phase Agilent® Poroshell 120EC C18 column was used with methanol: 0.1% aqueous formic acid (95:5 v/v) as a mobile phase. The detection was performed in multiple reaction monitoring mode using positive electrospray ionization. The method's validation was conducted in accordance with US FDA and European Medicines Agency guidelines. Results & conclusion: Grapefruit juice should be ingested with caution in patients treated with antithrombotic medications as it may increase their plasma concentration, inducing bleeding, and requires close clinical monitoring.

A ratiometric electrochemical probe for the quantification of apixaban in unprocessed plasma samples using carbon aerogel/BFO modified glassy carbon electrodes

A novel electrochemical probe was established for the quantification of apixaban (APX) in unprocessed plasma samples. Efficiently oxidized graphene oxide aerogels (EEGO-AGs) and nano-sized Bi2Fe4O9 (BFO) particles were electrodeposited on the surface of a glassy carbon electrode (GCE). In this work, a ratiometric electrochemical method was introduced for APX detection to enhance the specificity of the probe in plasma samples. The fabricated ratiometric probe was employed for the indirect detection determination of APX using K3[Fe(CN)6]/K4[Fe(CN)6] as the redox pair. The differential pulse voltammetry technique was used to record the current alteration of the BFO/EEGO-AG-functionalized GCE probe at various APX concentrations. The probe response was proportional to the APX concentrations from 10 ng mL-1 to 10 μg mL-1 with a low limit of quantification (LLOQ) of 10 ng mL-1. After validation, this method was successfully utilized for the determination of APX in patients' plasma samples who have taken APX regularly. The fabricated chemosensor detected APX concentrations in unprocessed plasma samples with high selectivity, resulting from the physical filtering antifouling activity of aerogels.

Influence of Surface-Modification via PEGylation or Chitosanization of Lipidic Nanocarriers on In Vivo Pharmacokinetic/Pharmacodynamic Profiles of Apixaban

Nanostructured lipid carriers (NLCs) have been proven to significantly improve the bioavailability and efficacy of many drugs; however, they still have many limitations. These limitations could hinder their potential for enhancing the bioavailability of poorly water-soluble drugs and, therefore, require further amendments. From this perspective, we have investigated how the chitosanization and PEGylation of NLCs affected their ability to function as a delivery system for apixaban (APX). These surface modifications could enhance the ability of NLCs to improve the bioavailability and pharmacodynamic activity of the loaded drug. In vitro and in vivo studies were carried out to examine APX-loaded NLCs, chitosan-modified NLCs, and PEGylated NLCs. The three nanoarchitectures displayed a Higuchi-diffusion release pattern in vitro, in addition to having their vesicular outline proven via electron microscopy. PEGylated and chitosanized NLCs retained good stability over 3 months, versus the nonPEGylated and nonchitosanized NLCs. Interestingly, APX-loaded chitosan-modified NLCs displayed better stability than the APX-loaded PEGylated NLCs, in terms of mean vesicle size after 90 days. On the other hand, the absorption profile of APX (AUC_0-inf) in rats pretreated with APX-loaded PEGylated NLCs (108.59 µg·mL^-1·h^-1) was significantly higher than the AUC_0-inf of APX in rats pretreated with APX-loaded chitosan-modified NLCs (93.397 µg·mL^-1·h^-1), and both were also significantly higher than AUC_0-inf of APX-Loaded NLCs (55.435 µg·mL^-1·h^-1). Chitosan-coated NLCs enhanced APX anticoagulant activity with increased prothrombin time and activated partial thromboplastin time by 1.6- and 1.55-folds, respectively, compared to unmodified NLCs, and by 1.23- and 1.37-folds, respectively, compared to PEGylated NLCs. The PEGylation and chitosanization of NLCs enhanced the bioavailability and anticoagulant activity of APX over the nonmodified NLCs; this highlighted the importance of both approaches.

Tailoring Apixaban in Nanostructured Lipid Carrier Enhancing Its Oral Bioavailability and Anticoagulant Activity

Apixaban (Apx), an oral anticoagulant drug, is a direct factor Xa inhibitor for the prophylaxis against venous thromboembolism. Apx has limited oral bioavailability and poor water solubility. The goal of this study was to improve the formulation of an Apx-loaded nanostructured lipid carrier (NLC) to increase its bioavailability and effectiveness. As solid lipid, liquid lipid, hydrophilic, and lipophilic stabilizers, stearic acid, oleic acid, Tween 80, and lecithin were used, respectively. Utilizing Box-Behnken design, the effects of three factors on NLC particle size (Y1), zeta potential (Y2), and entrapment efficiency percent (Y3) were examined and optimized. The optimized formula was prepared, characterized, morphologically studied, and pharmacokinetically and pharmacodynamically assessed. The observed responses of the optimized Apx formula were 315.2 nm, -43.4 mV, and 89.84% for Y1, Y2, and Y3, respectively. Electron microscopy revealed the homogenous spherical shape of the NLC particles. The in vivo pharmacokinetic study conducted in male Wistar rats displayed an increase in AUC and Cmax by 8 and 2.67 folds, respectively, compared to oral Apx suspension. Moreover, the half-life was increased by 1.94 folds, and clearance was diminished by about 8 folds, which makes the NLC formula a promising sustained release system. Interestingly, the pharmacodynamic results displayed the superior effect of the optimized formula over the drug suspension with prolongation in the cuticle bleeding time. Moreover, both prothrombin time and activated partial thromboplastin time are significantly increased. So, incorporating Apx in an NLC formula significantly enhanced its oral bioavailability and pharmacodynamic activity.

Conventional and synchronous spectrofluorometric determination of the recently administered drugs for treatment of COVID-19 favipiravir and apixaban

COVID-19 is a fast-spreading pandemic that is caused by SARS-CoV-2 viral pathogen. Combination therapy of the antiviral favipiravir and the anticoagulant apixaban is one of the efficient treatment regimens. Therefore, development of novel and sensitive methods for simultaneous analysis of such combination is highly advantageous. Herein, two eco-friendly, simple, rapid, and cost-effective spectrofluorometric methods were evolved for the estimation of favipiravir and apixaban in pharmaceutical and biological matrices. Method I was based on analysis of favipiravir and apixaban by the first-order derivative of the conventional fluorescence spectra obtained after excitation at 300 nm, where favipiravir and apixaban were detected at 468.8 and 432.0 nm, respectively. Method II relied on dual scan synchronous spectrofluorometry, in which favipiravir was determined at 364 nm using Δλ = 60 nm while apixaban was analyzed at 274 nm using Δλ = 200 nm. Method optimization was performed for selecting the optimum conditions at which maximum sensitivity and selectivity were obtained. This report is the first one that describes simultaneous analysis of favipiravir and apixaban by synchronous spectrofluorometry. The developed methods were successfully applied to evaluate favipiravir and apixaban in spiked human plasma and in pharmaceutical dosages with high %recoveries and low RSD.

Amanitins in Wild Mushrooms: The Development of HPLC-UV-EC and HPLC-DAD-MS Methods for Food Safety Purposes

Mushroom poisoning remains a serious food safety and health concern in some parts of the world due to its morbidity and mortality. Identification of mushroom toxins at an early stage of suspected intoxication is crucial for a rapid therapeutic decision. In this study, a new extraction method was developed to determine α- and β-amanitin in mushroom samples collected from central Portugal. High-performance liquid chromatography with in-line ultraviolet and electrochemical detection was implemented to improve the specificity of the method. The method was fully validated for linearity (0.5-20.0 µg·mL^-1), sensitivity, recovery, and precision based on a matrix-matched calibration method. The limit of detection was 55 µg mL^-1 (UV) and 62 µg mL^-1 (EC) for α-amanitin and 64 µg mL^-1 (UV) and 24 µg mL^-1 (EC) for β-amanitin. Intra- and inter-day precision differences were less than 13%, and the recovery ratios ranged from 89% to 117%. The developed method was successfully applied to fourteen Amanita species (A. sp.) and compared with five edible mushroom samples after extraction with Oasis^® PRIME HLB cartridges without the conditioning and equilibration step. The results revealed that the A. phalloides mushrooms present the highest content of α- and β-amanitin, which is in line with the HPLC-DAD-MS. In sum, the developed analytical method could benefit food safety assessment and contribute to food-health security, as it is rapid, simple, sensitive, accurate, and selectively detects α- and β-amanitin in any mushroom samples.

ICH and US-FDA validated HPTLC methods with greenness assessments for the assay of mixtures prescribed in stroke prophylaxis: application to pharmaceutical preparations and human plasma

The importance of the binary mixtures of the novel oral anticoagulants (NOACs): apixaban (APX), edoxaban tosylate (EDX) and rivaroxaban (RIV) with the lipid-lowering statin, rosuvastatin calcium (ROS) is highly emerging to save lives of cardiovascular patients as these combinations are used in prophylaxis from stroke. A high-performance thin-layer chromatography (HPTLC) method was developed for the quantitative assay of these life-saving mixtures in tablets and human plasma. Two mobile phases were developed for the assay in bulk and tablets; the first one: toluene‒ethyl acetate‒methanol‒25% ammonia (3.5:4.5:2:0.2, V/V) (method I) used for the three mixtures, and the second one: methanol‒25% ammonia (9.95:0.05, V/V) (method II) used for EDX/ROS mixture only. For analysis in human plasma, APX was used as internal standard in RIV/ROS and EDX/ROS mixtures using methods I and II, respectively, while RIV was used as internal standard in APX/ROS mixture using method I; the methods were validated according to the Food and Drug Administration (FDA) regulation for analysis in biological fluids. The method selectivity was demonstrated by its ability to simultaneously analyze the drugs in the presence of dosage form excipients and in the presence of plasma interferences (analysis in biological fluid) at single wavelength (291 nm) by use of the internal standard.

Core shell stationary phase for a novel separation of some COVID-19 used drugs by UPLC-MS/MS Method: Study of grapefruit consumption impact on their pharmacokinetics in rats

A sensitive and selective UPLC-MS/MS method was developed for the synchronized determination of four drugs used in severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), namely, azithromycin, apixaban, dexamethasone, and favipiravir in rat plasma. using a Poroshell 120 EC-C18 column (50 mm × 4.6 mm, 2.7 m) with a high-resolution ESI tandem mass spectrometer detection with multiple reaction monitoring. We used an Agilent Poroshell column, which is characterized by a stationary phase based on non-porous core particles. With a remarkable improvement in the number of theoretical plates and low column backpressure. In addition, the developed method was employed in studying the potential food-drug interaction of grapefruit juice (GFJ) with the selected drugs which affects their pharmacokinetics in rats. The LC-MS/MS operated in positive and negative ionization mode using two internal standards: moxifloxacin and chlorthalidone, respectively. Liquid- liquid extraction of the cited drugs from rat plasma was accomplished using diethyl ether: dichloromethane (70:30, v/v). The analytes were separated using methanol: 0.1 % formic acid in water (95: 5, v/v) as a mobile phase in isocratic mode of elution pumped at a flow rate of 0.3 mL/min. A detailed validation of the bio-analytical method was performed in accordance with US-FDA and EMA guidelines. Concerning the in vivo pharmacokinetic study, the statistical significance between the results of the test groups receiving GFJ along with the cited drugs and the control group was assessed demonstrating that GFJ increased the plasma concentration of azithromycin, apixaban, and dexamethasone. Accordingly, this food-drug interaction requires cautious ingestion of GFJ in patients using (SARS-CoV-2) medications as it can produce negative effects in the safety of the drug therapy. A potential drug-drug interaction is also suggested between those medications requiring a suitable dose adjustment.

Selection of Specific Aptamer against Rivaroxaban and Utilization for Label-Free Electrochemical Aptasensing Using Gold Nanoparticles: First Announcement and Application for Clinical Sample Analysis

For the first time, a novel aptamer was designed and utilized for the selective detection of rivaroxaban (RIV) using the integration of bioinformatics with biosensing technology. The selected aptamer with the sequence 5'-TAG GGA AGA GAA GGA CAT ATG ATG ACT CAC AAC TGG ACG AAC GTA CTT ATC CCC CCC AAT CAC TAG TGA ATT-3' displayed a high binding affinity to RIV and had an efficient ability to discriminate RIV from similar molecular structures. A novel label-free electrochemical aptasensor was designed and fabricated through the conjugation of a thiolated aptamer with Au nanoparticles (Au-NPs). Then, the aptasensor was successfully applied for the quantitative determination of RIV in human plasma and exhaled breath condensate (EBC) samples with limits of detection (LODs) of 14.08 and 6.03 nM, respectively. These valuable results provide ample evidence of the green electrogeneration of AuNPs on the surface of electrodes and their interaction with loaded aptamers (based on Au-S binding) towards the sensitive and selective monitoring of RIV in human plasma and EBC samples. This bio-assay is an alternative approach for the clinical analysis of RIV and has improved specificity and affinity. As far as we know, this is the first time that an electrochemical aptasensor has been verified for the recognition of RIV and that allows for the easy, fast, and precise screening of RIV in biological samples.

LC-MS/MS Method Assay for Simultaneous Determination of the Apixaban and Metformin in Rat Plasma: Assessment of Pharmacokinetic Drug-Drug Interaction Study

A simple, sensitive and accurate LC-MS/MS method was developed and validated for the simultaneous quantification of apixaban (APB) and metformin (MET) in rat plasma using rivaroxaban as internal standard (IS). An Inertsil ODS3 C18 column (150 × 4.6 mm, 5 μm) was used for chromatographic separation with isocratic elution. Multiple reaction monitoring (MRM) using positive-ion ESI mode to monitor ion transitions of m/z 459.8 → 442.8 for APB, m/z 130.2 → 71.2 for MET, m/z 436.8 → 144.9 for IS. The procedure of method validation included selectivity, linearity, precision, accuracy, matrix effect, extraction recovery and stability were conducted according to the guidelines of EMA and FDA. The method was validated over the concentration range of 0.5-250 ng/mL for APB and 8-8000 ng/mL for MET. The intra- and inter-day precision and accuracy of the quality control samples exhibited relative standard deviations (RSD) < 12.5% and the accuracy values ranged from -8.6 to 12.4%. Recovery and matrix effect values variations were all less than 15%. After oral administration APB and MET to rats, the comparison of pharmacokinetic parameters of APB in the single and co-administrated groups showed significant difference in AUC(0-t) from 730.71 ± 121.31 to 573.07 ± 90.13 ng/mL·h, t1/2 from 5.86 ± 3.21 to 4.24 ± 1.15 h and Cmax from113.54 ± 24.04 to 159.42 ± 54.6 ng/mL. The comparison of pharmacokinetic parameters of MET in the single and co-administrated groups showed significant difference in t1/2 from 2.83 ± 1.81 to 3.97 ± 0.57 h and Cmax from 4015.76 ± 873.23 to 3153.6 ± 1012.51 ng/mL. The results indicated that drug-drug interactions (DDI) occurred might be owing to APB affect one or all of OCTs, MATE1, MATE2-K.

Determination of Rivaroxaban in Rat Plasma by UHPLC-Q-Orbitrap HRMS and Its Application to A Pharmacokinetic Study

Therapeutic drug monitoring is critical to decrease the incidence rate of bleeding and thrombosis for personalized treatment of rivaroxaban, especially for drug interaction treatment, renal dysfunction patients, elderly patients, cardiovascular patients, and so on. And, an accuracy analytical method is necessary to therapeutic drug monitoring. This study developed a ultra high performance liquid chromatography-tandem orbitrap high-resolution mass spectrometry (UHPLC-Q-Orbitrap HRMS) method to accurately identify and quantify rivaroxaban in rat plasma. Isotope internal standard method was applied for accurate quantification. And rivaroxaban-d₄ was selected as isotope internal standard substance. The m/z 436.07263 ([M+H]⁺ ) was selected as precursor ions and the m/z 144.95085, 231.11259 were selected as main product ions for rivaroxaban. The LLOQ of rivaroxaban in plasma was 0.01 mg/L. The intra- and inter-day precisions were ≤3.65 % and ≤8.16 %. And the recoveries were ranged from 87.4% to 95.2%. This analysis method was simple, low cost, and easy to operation and applied successfully to a pharmacokinetic study of rivaroxaban in rat plasma. This analysis method could be helpful to promote further research on the mechanism of rivaroxaban and drug interaction, which can avoid the false positives due to its high precision identification.

Rapid Assay for the Therapeutic Drug Monitoring of Edoxaban

Edoxaban is a direct oral anticoagulant (DOAC) that has been recently indicated for the treatment of pulmonary embolism (PE) in SARS-CoV-2 infections. Due to its pharmacokinetic variability and a narrow therapeutic index, the safe administration of the drug requires its therapeutic drug monitoring (TDM) in patients receiving the treatment. In this work, we present a label-free method for the TDM of edoxaban by surface enhanced Raman spectroscopy (SERS). The new method utilises the thiol chemistry of the drug to chemisorb its molecules onto a highly sensitive SERS substrate. This leads to the formation of efficient hotspots and a strong signal enhancement of the drug Raman bands, thus negating the need for a Raman reporter for its SERS quantification. The standard samples were run with a concentration range of 1.4 × 10⁻⁴ M to 10⁻¹² M using a mobile phase comprising of methanol/acetonitrile (85:15 v/v) at 291 nm followed by the good linearity of R² = 0.997. The lowest limit of quantification (LOQ) by the SERS method was experimentally determined to be 10⁻¹² M, whereas LOQ for HPLC-UV was 4.5 × 10⁻⁷ M, respectively. The new method was used directly and in a simple HPLC-SERS assembly to detect the drug in aqueous solutions and in spiked human blood plasma down to 1 pM. Therefore, the SERS method has strong potential for the rapid screening of the drug at pathology labs and points of care.

Stability-indicating RP-HPLC assay of three novel oral anticoagulants binary mixtures with rosuvastatin calcium: Application to pharmaceutical preparations and human plasma

The binary mixtures of the novel oral anticoagulants (NOACs); Apixaban (APX), Edoxaban tosylate (EDX) and Rivaroxaban (RIV) with the lipid lowering statin; Rosuvastatin calcium were analyzed using a validated HPLC-DAD method. This method was suitable for the quantitative assay of the targeted mixtures in tablets and human plasma. The analysis in dosage form was a stability indicating one where the drugs were separated from possible degradation products arising from applying different stress conditions. For analysis in human plasma, EDX was used as internal standard in APX/ROS and RIV/ROS mixtures, while APX was used as internal standard in EDX/ROS mixture and the method was validated according to FDA regulation for analysis in biological fluids. A ZORBAX Eclipse column C18 (4.6 × 150 mm × 5 µm) was used as stationary phase with a gradient eluting mobile phase composed of acidified water and acetonitrile. The method selectivity was demonstrated by its ability to simultaneously analyze the drugs in presence of possible forced degradation products and dosage form excipients and in presence of plasma interferences (analysis in biological fluid) at a single wavelength (291 nm) with the use of the internal standard. The simplicity of the method emphasizes its capability to analyze the drugs in pharmaceutical preparations and human plasma. This is very important in regular clinical monitoring of the drugs plasma concentrations for cardiovascular patients medicated with either of these combinations, as prophylaxis from stroke, in order to prevent severe bleeding and to achieve optimum dose adjustment.

Quality risk assessment and DoE – Practiced validated stability-indicating chromatographic method for quantification of Rivaroxaban in bulk and tablet dosage form

A systematic DoE and Analytical Quality by Design (AQbD) approach was utilized for the development and validation of a novel stability indicating high-performance thin–layer chromatographic (HPTLC) method for Rivaroxaban (RBN) estimation in bulk and marketed formulation. A D-optimal design was used to screen the effect of solvents, volume of solvents, time from spotting to development and time for development to scanning. ANOVA results and Pareto chart revealed that toluene, methanol, water and saturation time had an impact on retention time. The critical method and material attributes were further screened by Box-Behnken design (BBD) to achieve optimal chromatographic condition. A stress degradation study was carried out and structure of major alkaline degradant was elaborated. According to the design space, a control strategy was used with toluene: methanol: water (6:2:2) and the saturation time was 15 min. A retention factor (RF) of 0.59 ± 0.05 was achieved for RBN using chromatographic plate precoated with silica gel at detection wavelength 282 nm with optimized conditions. The linear calibration curve was achieved in the concentration range of 200–1,200 ng/band with r 2 > 0.998 suggesting good coordination between analyte concentration and peak areas. The quadratic model was demonstrated as the best fit model and no interaction was noted between CMAs. The optimized HPTLC method was validated critically as stated in International Conference on Harmonization (ICH) Q2 (R1) guideline and implemented successfully for stress degradation study of RBN. The developed HPTLC method obtained through AQbD application was potentially able to resolve all degradants of RBN achieved through forced degradation study. The obtained results demonstrate that a scientific AQbD approach implementation in HPTLC method development and stress degradation study drastically minimizes the number of trials in experiments, ultimately time and cost of analysis could be minimized.

Development and validation of an analytical method for the determination of direct oral anticoagulants (DOAC) and the direct thrombin-inhibitor argatroban by HPLC-MS/MS

Since direct oral anticoagulants (DOAC) are administered frequently to an elderly, co-morbid population, medical emergencies including trauma, acute bleeding or organ failure are not uncommon. In these situations, the type, dosage or the time of last intake of anticoagulants is often unknown and single substance analysis by functional tests is only possible if the substance contained in the sample is known. A reliable and validated toxicology screen of DOAC and argatroban would be helpful inform not only attending physicians in the emergency department but also law enforcement and courts of justice. After precipitation with acetone, HPLC separation was achieved on a Phenomenex Luna Pentafluorophenyl Colum using acetonitrile–water (90:10, v/v) as mobile phase system. Detection was performed using a 3200 Q Trap mass spectrometer (AB Sciex). For analysis MRM Scans (MS/MS) with positive ionization were chosen. The method was validated for blank serum as the matrix of choice. Limits of detection are between 0.5 and 1.0 ng/mL, limits of quantification are between 1.9 and 3.6 ng/mL and recoveries are above 60%. The applicability of the method was demonstrated by the determination of DOAC in body fluids from forensic cases and in therapeutic drug monitoring. The rapid simultaneous detection and quantification of apixaban, argatroban, dabigatran etexilate, dabigatran, edoxaban and rivaroxaban in body fluids by HPLC–MS/MS closes an important gap in emergency toxicology.

Binding of direct oral anticoagulants to the FA1 site of human serum albumin

The anticoagulant therapy is widely used to prevent and treat thromboembolic events. Until the last decade, vitamin K antagonists were the only available oral anticoagulants; recently, direct oral anticoagulants (DOACs) have been developed. Since 55% to 95% of DOACs are bound to plasma proteins, the in silico docking and ligand-binding properties of drugs apixaban, betrixaban, dabigatran, edoxaban, and rivaroxaban and of the prodrug dabigatran etexilate to human serum albumin (HSA), the most abundant plasma protein, have been investigated. DOACs bind to the fatty acid (FA) site 1 (FA1) of ligand-free HSA, whereas they bind to the FA8 and FA9 sites of heme-Fe(III)- and myristic acid-bound HSA. DOACs binding to the FA1 site of ligand-free HSA has been validated by competitive inhibition of heme-Fe(III) recognition. Values of the dissociation equilibrium constant for DOACs binding to the FA1 site (ie, ^calc K_DOAC ) derived from in silico docking simulations (ranging between 1.2 × 10^-8 M and 1.4 × 10^-6 M) agree with those determined experimentally from competitive inhibition of heme-Fe(III) binding (ie, ^exp K_DOAC ; ranging between 2.5 × 10^-7 M and 2.2 × 10^-6 M). In addition, this study highlights the inequivalence of rivaroxaban binding to mammalian serum albumin. Given the HSA concentration in vivo (~7.5 × 10^-4 M), values of K_DOAC here determined indicate that the formation of the HSA:DOACs complexes in the absence and presence of FAs and heme-Fe(III) may occur in vivo. Therefore, HSA appears to be an important determinant for DOACs transport.

Development of a reversed-phase high-performance liquid chromatographic method for the determination of propranolol in different skin layers

The aim of this work was to develop and validate an analytical method using HPLC for the determination of propranolol in the different layers of the skin to be used in kinetic studies of skin permeation. The development of the method was based on the suitability of the chromatogram, and the validation followed the international health regulation for bioanalytical methods. In addition, the method was tested in an in vitro permeation assay using porcine skin. The drug was determined using an RP-C18 column at 30°C, a mobile phase comprising acidic aqueous phase:acetonitrile (75:25 v/v), at a flow rate of 1.0 mL min^-1 , and UV detection at 290 nm. The method was demonstrated to be selective against skin contaminants, linear in a wide range of concentrations (3-20 μg mL^-1 ), sensitive enough to quantify less than 0.1% of the drug dosage in skin matrices, and precise regardless of analysis variations such as day of analysis, analyst, or equipment. In addition, the method presented a high drug extraction capacity greater than 90% for all skin layers (stratum corneum, hair follicle, and remaining skin). Finally, the method was successfully tested in skin permeation assays, proving its value in the development of topical formulations containing propranolol.

Review of Chromatographic Methods Coupled with Modern Detection Techniques Applied in the Therapeutic Drugs Monitoring (TDM)

Therapeutic drug monitoring (TDM) is a tool used to integrate pharmacokinetic and pharmacodynamics knowledge to optimize and personalize various drug therapies. The optimization of drug dosing may improve treatment outcomes, reduce toxicity, and reduce the risk of developing drug resistance. To adequately implement TDM, accurate and precise analytical procedures are required. In clinical practice, blood is the most commonly used matrix for TDM; however, less invasive samples, such as dried blood spots or non-invasive saliva samples, are increasingly being used. The choice of sample preparation method, type of column packing, mobile phase composition, and detection method is important to ensure accurate drug measurement and to avoid interference from matrix effects and drug metabolites. Most of the reported procedures used liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) techniques due to its high selectivity and sensitivity. High-performance chromatography with ultraviolet detection (HPLC-UV) methods are also used when a simpler and more cost-effective methodology is desired for clinical monitoring. The application of high-performance chromatography with fluorescence detection (HPLC-FLD) with and without derivatization processes and high-performance chromatography with electrochemical detection (HPLC-ED) techniques for the analysis of various drugs in biological samples for TDM have been described less often. Before chromatographic analysis, samples were pretreated by various procedures-most often by protein precipitation, liquid-liquid extraction, and solid-phase extraction, rarely by microextraction by packed sorbent, dispersive liquid-liquid microextraction. The aim of this article is to review the recent literature (2010-2020) regarding the use of liquid chromatography with various detection techniques for TDM.