Patch tracheoplasty in body tissue engineering using collagenous connective tissue membranes (biosheets)

Bladder Reconstruction in Cats Using In-Body Tissue Architecture (iBTA)-Induced Biosheet

Urinary tract diseases are common in cats, and often require surgical reconstruction. Here, to explore the possibility of urinary tract reconstruction in cats using in-body tissue architecture (iBTA), biosheets fabricated using iBTA technology were implanted into the feline bladder and the regeneration process was histologically evaluated. The biosheets were prepared by embedding molds into the dorsal subcutaneous pouches of six cats for 2 months. A section of the bladder wall was removed, and the biosheets were sutured to the excision site. After 1 and 3 months of implantation, the biosheets were harvested and evaluated histologically. Implantable biosheets were formed with a success rate of 67%. There were no major complications following implantation, including tissue rejection, severe inflammation, or infection. Urinary incontinence was also not observed. Histological evaluation revealed the bladder lumen was almost entirely covered by urothelium after 1 month, with myofibroblast infiltration into the biosheets. After 3 months, the urothelium became multilayered, and mature myocytes and nerve fibers were observed at the implantation site. In conclusion, this study showed that tissue reconstruction using iBTA can be applied to cats, and that biosheets have the potential to be useful in both the structural and functional regeneration of the feline urinary tract.

Diverse Shape Design and Physical Property Evaluation of In-Body Tissue Architecture-Induced Tissues

Autologous-engineered artificial tissues constitute an ideal alternative for radical surgery in terms of natural anticoagulation, self-repair, tissue regeneration, and the possibility of growth. Previously, we focused on the development and practical application of artificial tissues using "in-body tissue architecture (iBTA)", a technique that uses living bodies as bioreactors. This study aimed to further develop iBTA by fabricating tissues with diverse shapes and evaluating their physical properties. Although the breaking strength increased with tissue thickness, the nominal breaking stress increased with thinner tissues. By carving narrow grooves on the outer periphery of an inner core with narrow grooves, we fabricated approximately 2.2 m long cord-shaped tissues and net-shaped tissues with various designs. By assembling the two inner cores inside the branched stainless-steel pipes, a large graft with branching was successfully fabricated, and its aortic arch replacement was conducted in a donor goat without causing damage. In conclusion, by applying iBTA technology, we have made it possible, for the first time, to create tissues of various shapes and designs that are difficult using existing tissue-engineering techniques. Thicker iBTA-induced tissues exhibited higher rupture strength; however, rupture stress was inversely proportional to thickness. These findings broaden the range of iBTA-induced tissue applications.

Dramatic Wound Closing Effect of a Single Application of an iBTA-Induced Autologous Biosheet on Severe Diabetic Foot Ulcers Involving the Heel Area

INTRODUCTION

Chronic wounds caused by diabetes or lower-extremity artery disease are intractable because the wound healing mechanism becomes ineffective due to the poor environment of the wound bed. Biosheets obtained using in-body tissue architecture (iBTA) are collagen-based membranous tissue created within the body and which autologously contain various growth factors and somatic stem cells including SSEA4-posituve cells. When applied to a wound, granulation formation can be promoted and epithelialization may even be achieved. Herein, we report our clinical treatment experience with seven cases of intractable diabetic foot ulcers.

CASES

Seven patients, from 46 to 93 years old, had large foot ulcers including in the heel area, which were failing to heal with standard wound treatment.

METHODS

Two or four Biosheet-forming molds were embedded subcutaneously in the chest or abdomen, and after 3 to 6 weeks, the molds were removed. Biosheets that formed inside the mold were obtained and applied directly to the wound surface.

RESULTS

In all cases, there were no problems with the mold's embedding and removal procedures, and Biosheets were formed without any infection or inflammation during the embedding period. The Biosheets were simply applied to the wounds, and in all cases they adhered within one week, did not fall off, and became integrated with the wound surface. Complete wound closure was achieved within 8 weeks in two cases and within 5 months in two cases. One patient was lost due to infective endocarditis from septic colitis. One case required lower leg amputation due to wound recurrence, and one case achieved wound reduction and wound healing in approximately 9 months.

CONCLUSIONS

Biosheets obtained via iBTA promoted wound healing and were extremely useful for intractable diabetic foot ulcers involving the heel area.

Successful reconstruction of the rat ureter by a syngeneic collagen tube with a cardiomyocyte sheet

Introduction

Ureteral injuries require surgical intervention as they lead to loss of renal function. The current reconstructive techniques for long ureteral defects are problematic. Consequently, this study aimed to reconstruct the ureter in a rat model using subcutaneously prepared autologous collagen tubes (Biotubes).

Methods

The lower ureter of LEW/SsNSlc rats was ligated to dilate the ureter to make anastomosis easier, and reconstruction was performed six days later by anastomosing the dilated ureter and bladder with a Biotube that was prepared subcutaneously in syngeneic rats. Some rats underwent left nephrectomy and ureter reconstruction simultaneously as negative controls to evaluate the effects of urine flow on patency. The other rats were divided into three groups as follows: a group in which the ureter was reconstructed with the Biotube alone, a group in which cardiomyocyte sheets made from the neonatal hearts of syngeneic rats were wrapped around the Biotube, and a group in which an adipose-derived stem cell sheets made from the inguinal fat of adult syngeneic rats were wrapped. Contrast-enhanced computed tomography and pathological evaluations were performed two weeks after reconstruction.

Result

In the Biotube alone group, all tubes were occluded and hydronephrosis developed, whereas the urothelium regenerated beyond the anastomosis when the left kidney was not removed, suggesting that urothelial epithelial spread occurred with urinary flow. The patency of the ureteral lumen was obtained in some rats in the cardiomyocyte sheet covered group, whereas stricture or obstruction of the reconstructed ureter was observed in all rats in the other groups. Pathological evaluation revealed a layered urothelial structure in the cardiomyocyte sheet covered group, although only a small amount of cardiomyocyte sheets remained.

Conclusion

Urinary flow may support the epithelial spread of the urothelium into the reconstructed ureter. Neonatal rat cardiomyocyte sheets supported the patency of the regenerated ureter with a layered urothelium.

Perpendicular implantation of porcine trachea extracellular matrix for enhanced xenogeneic scaffold surface epithelialization in a canine model

Objective

The availability of clinically applied medical materials in thoracic surgery remains insufficient, especially materials for treating tracheal defects. Herein, the potential of porcine extracellular matrix (P-ECM) as a new airway reconstruction material was explored by xenotransplanting it into a canine trachea.

Methods

P-ECM was first transplanted into the buttocks of Narc Beagle dogs (n = 3) and its overall immuno-induced effects were evaluated. Subsequently, nine dogs underwent surgery to create a tracheal defect that was 1 × 2 cm. In group A, the P-ECM was implanted parallel to the tracheal axis (n = 3), whereas in group B the P-ECM was implanted perpendicular to the tracheal axis (n = 6). The grafts were periodically observed by bronchoscopy and evaluated postoperatively at 1 and 3 months through macroscopic and microscopic examinations. Immunosuppressants were not administered. Statistical evaluation was performed for Bronchoscopic stenosis rate, graft epithelialization rate, shrinkage rate and ECM live-implantation rate.

Results

No sign of P-ECM rejection was observed after its implantation in the buttocks. Bronchoscopic findings showed no improvement concerning stenosis in group A until 3 months after surgery; epithelialization of the graft site was not evident, and the ECM site appeared scarred and faded. In contrast, stenosis gradually improved in group B, with continuous epithelium within the host tissues and P-ECM. Histologically, the graft site contracted longitudinally and no epithelialization was observed in group A, whereas full epithelialization was observed on the P-ECM in group B. No sign of cartilage regeneration was confirmed in both groups. No statistically significant differences were found in bronchoscopic stenosis rate, shrinkage rate and ECM live-implantation rate, but graft epithelialization rate showed a statistically significant difference (G-A; sporadic (25%) 3, vs. G-B; full covered (100%) 3; p = 0.047).

Conclusions

P-ECM can support full re-epithelialization without chondrocyte regeneration, with perpendicular implantation facilitating epithelialization of the ECM. Our results showed that our decellularized tracheal matrix holds clinical potential as a biological xenogeneic material for airway defect repair.

A new method of primary engineering of esophagus using orthotopic in-body tissue architecture

PURPOSE

Tissue engineering of esophagus is required for management of long-gap esophageal atresia (LGEA). Collagenous connective tissue membranes fabricated by in-body tissue architecture (iBTA), called biosheets, can repair esophageal defects and generate tissues similar to native esophagus. However, iBTA requires second-stage surgery because of heterotopic preparation of biosheets. Our aim was to develop orthotopic iBTA for primary engineering of the esophagus by interposing a tubular mold to the esophageal defect.

METHOD

The cervical esophagus of six rats was transected. An acrylic tube (internal diameter 2.6 mm, length 7.0 mm) was inserted and fixed between the ends of the upper and lower esophagus, and a 3 mm-long esophageal defect was created. Four weeks later, the rats were sacrificed for histological analysis.

RESULTS

Postoperatively the rats could intake liquid food. After four weeks, the esophageal defects were filled with regenerated tissues. Histologically the new esophageal walls stained positive for collagen type I. The inner surfaces were covered with stratified squamous epithelium that expressed pan-cytokeratin. In only one of six rats, regeneration of muscular-like tissue was suggested by positive immunohistochemical staining for desmin.

CONCLUSION

Orthotopic iBTA can regenerate a substitute esophagus with esophageal epithelium and collagenous wall. This technique may be a novel treatment for esophageal atresia with gaps of various lengths including LGEA.

Aortic valve neocuspidization with in-body tissue-engineered autologous membranes: preliminary results in a long-term goat model

OBJECTIVES

Aortic valve neocuspidization has shown satisfactory clinical outcomes; however, autologous pericardium durability is a concern for young patients. This study applied an autologous collagenous membrane (Biosheet®), produced by in-body tissue architecture, to aortic valve neocuspidization and investigated its long-term outcome in a goat model.

METHODS

Moulds were embedded subcutaneously in 6 goats. After 2 months, Biosheets formed in the moulds. We performed aortic valve neocuspidization using a portion of the sheets with a thickness of 0.20-0.35 mm, measured by optical coherence tomography. Animals were subjected to echocardiography and histological evaluation at 6 months (n = 3) and 12 months (n = 3). As a control, the glutaraldehyde-treated autologous pericardium was used in 4 goats that were similarly evaluated at 12 months.

RESULTS

All animals survived the scheduled period. At 6 months, Biosheets maintained valve function and showed a regeneration response: fusion to the annulus, cell infiltration to the leaflets and appearance of elastic fibres at the ventricular side. After 12 months, the regenerative structure had changed little without regression, and there was negligible calcification in the 1/9 leaflets. However, all cases had one leaflet tear, resulting in moderate-to-severe aortic regurgitation. In the pericardium group, three-fourths of the animals experienced moderate-to-severe aortic regurgitation with a high rate of calcification (9/12 leaflets).

CONCLUSIONS

Biosheets may have regeneration potential and anti-calcification properties in contrast to autologous pericardium. However, in order to obtain reliable outcome, further improvements are required to strictly control and optimize its thickness, density and homogeneity.

Tissue engineering applications in otolaryngology-The state of translation

While tissue engineering holds significant potential to address current limitations in reconstructive surgery of the head and neck, few constructs have made their way into routine clinical use. In this review, we aim to appraise the state of head and neck tissue engineering over the past five years, with a specific focus on otologic, nasal, craniofacial bone, and laryngotracheal applications. A comprehensive scoping search of the PubMed database was performed and over 2000 article hits were returned with 290 articles included in the final review. These publications have addressed the hallmark characteristics of tissue engineering (cellular source, scaffold, and growth signaling) for head and neck anatomical sites. While there have been promising reports of effective tissue engineered interventions in small groups of human patients, the majority of research remains constrained to in vitro and in vivo studies aimed at furthering the understanding of the biological processes involved in tissue engineering. Further, differences in functional and cosmetic properties of the ear, nose, airway, and craniofacial bone affect the emphasis of investigation at each site. While otolaryngologists currently play a role in tissue engineering translational research, continued multidisciplinary efforts will likely be required to push the state of translation towards tissue-engineered constructs available for routine clinical use.

LEVEL OF EVIDENCE

NA.

Biomedical grafts for tracheal tissue repairing and regeneration "Tracheal tissue engineering: an overview"

Airway system is a vital part of the living being body. Trachea is the upper respiratory portion that connects nostril and lungs and has multiple functions such as breathing and entrapment of dust/pathogen particles. Tracheal reconstruction by artificial prosthesis, stents, and grafts are performed clinically for the repairing of damaged tissue. Although these (above-mentioned) methods repair the damaged parts, they have limited applicability like small area wounds and lack of functional tissue regeneration. Tissue engineering helps to overcome the above-mentioned problems by modifying the traditional used stents and grafts, not only repair but also regenerate the damaged area to functional tissue. Bioengineered tracheal replacements are biocompatible, nontoxic, porous, and having 3D biomimetic ultrastructure with good mechanical strength, which results in faster and better tissue regeneration. Till date, the bioengineered tracheal replacements studies have been going on preclinical and clinical levels. Besides that, still many researchers are working at advance level to make extracellular matrix-based acellular, 3D printed, cell-seeded grafts including living cells to overcome the demand of tissue or organ and making the ready to use tracheal reconstructs for clinical application. Thus, in this review, we summarized the tracheal tissue engineering aspects and their outcomes.

Fabrication of an anatomy-mimicking BIO-AIR-TUBE with engineered cartilage

Introduction

We devised a strategy for the fabrication of an ‘anatomy-mimicking’ cylinder-type engineered trachea combined with cartilage engineering. The engineered BIOTUBEs are used to support the architecture of the body tissue, for long-segment trachea (>5 cm) with carinal reconstruction. The aim of the present study was to fabricate an anatomy-mimicking cylinder-type regenerative airway, and investigate its applicability in a rabbit model.

Methods

Collagen sponge rings (diameter: 6 mm) were arranged on a silicon tube (diameter: 6 mm) at 2-mm intervals. Chondrocytes from the auricular cartilage were seeded onto collagen sponges immediately prior to implantation in an autologous manner. These constructs were embedded in dorsal subcutaneous pouches of rabbits. One month after implantation, the constructs were retrieved for histological examination. In addition, cervical tracheal sleeve resection was performed, and these engineered constructs were implanted into defective airways through end-to-end anastomosis.

Results

One month after implantation, the engineered constructs exhibited similar rigidity and flexibility to those observed with the native trachea. Through histological examination, the constructs showed an anatomy-mimicking tracheal architecture. In addition, the engineered constructs could be anastomosed to the native trachea without air leakage.

Conclusion

The present study provides the possibility of generating anatomy-mimicking cylinder-type airways, termed BIO-AIR-TUBEs, that engineer cartilage in an in-vivo culture system. This approach involves the use of BIOTUBEs formed via in-body tissue architecture technology. Therefore, the BIO-AIR-TUBE may be useful as the basic architecture of artificial airways.

Long-term outcomes of patch tracheoplasty using collagenous tissue membranes (biosheets) produced by in-body tissue architecture in a beagle model

PURPOSE

Although various artificial tracheas have been developed, none have proven satisfactory for clinical use. In-body tissue architecture (IBTA) has enabled us to produce collagenous tissues with a wide range of shapes and sizes to meet the needs of individual recipients. In the present study, we investigated the long-term outcomes of patch tracheoplasty using an IBTA-induced collagenous tissue membrane ("biosheet") in a beagle model.

METHODS

Nine adult female beagles were used. Biosheets were prepared by embedding cylindrical molds assembled with a silicone rod and a slitting pipe into dorsal subcutaneous pouches for 2 months. The sheets were then implanted by patch tracheoplasty. An endoscopic evaluation was performed after 1, 3, or 12 months. The implanted biosheets were harvested for a histological evaluation at the same time points.

RESULTS

All animals survived the study. At 1 month after tracheoplasty, the anastomotic parts and internal surface of the biosheets were smooth with ciliated columnar epithelium, which regenerated into the internal surface of the biosheet. The chronological spread of chondrocytes into the biosheet was observed at 3 and 12 months.

CONCLUSIONS

Biosheets showed excellent performance as a scaffold for trachea regeneration with complete luminal epithelium and partial chondrocytes in a 1-year beagle implantation model of patch tracheoplasty.

Replacement of Rat Tracheas by Layered, Trachea-Like, Scaffold-Free Structures of Human Cells Using a Bio-3D Printing System

Current scaffold-based tissue engineering approaches are subject to several limitations, such as design inflexibility, poor cytocompatibility, toxicity, and post-transplant degradation. Thus, scaffold-free tissue-engineered structures can be a promising solution to overcome the issues associated with classical scaffold-based materials in clinical transplantation. The present study seeks to optimize the culture conditions and cell combinations used to generate scaffold-free structures using a Bio-3D printing system. Human cartilage cells, human fibroblasts, human umbilical vein endothelial cells, and human mesenchymal stem cells from bone marrow are aggregated into spheroids and placed into a Bio-3D printing system with dedicated needles positioned according to 3D configuration data, to develop scaffold-free trachea-like tubes. Culturing the Bio-3D-printed structures with proper flow of specific medium in a bioreactor facilitates the rearrangement and self-organization of cells, improving physical strength and tissue function. The Bio-3D-printed tissue forms small-diameter trachea-like tubes that are implanted into rats with the support of catheters. It is confirmed that the tubes are viable in vivo and that the tracheal epithelium and capillaries proliferate. This tissue-engineered, scaffold-free, tubular structure can represent a significant step toward clinical application of bioengineered organs.

Engineering and repair of diaphragm using biosheet (a collagenous connective tissue membrane) in rabbits

BACKGROUND

Prosthetic patches can be used to repair large congenital diaphragmatic hernia defects but may be associated with infection, recurrence, and thoracic deformity. Biosheets (collagenous connective tissue membranes) have been used in regenerative medicine. We evaluated the efficacy of Biosheets in a rabbit model.

METHODS

Biosheets were prepared by embedding silicone plates in dorsal subcutaneous pouches of rabbits for 4weeks. In group 1 (n=11), Gore-Tex® sheets (1.8×1.8cm) were implanted into a diaphragmatic defect. In group 2 (n=11), Seamdura®, a bioabsorbable artificial dural substitute, was implanted in the same manner. In group 3 (n=14), biosheets were autologously transplanted into the diaphragmatic defects. All rabbits were euthanized 3months after transplantation to evaluate their graft status.

RESULTS

Herniation of liver was observed in 5 rabbits (45%) in group 1, 8 (73%) in group 2, and 3 (21%) in group 3. A significant difference was noted between groups 2 and 3 (P=0.017). Biosheets had equivalent burst strength and modulus of elasticity as native diaphragm. Muscular tissue regeneration in transplanted biosheets in group 3 was confirmed histologically.

CONCLUSION

Biosheets may be applied to diaphragmatic repair and replacement of diaphragmatic muscular tissue.

LEVEL OF EVIDENCE

Level III.

Patch esophagoplasty using an in-body-tissue-engineered collagenous connective tissue membrane

AIM

Although many approaches to esophageal replacement have been investigated, these efforts have thus far only met limited success. In-body-tissue-engineered connective tissue tubes have been reported to be effective as vascular replacement grafts. The aim of this study was to investigate the usefulness of an In-body-tissue-engineered collagenous connective tissue membrane, "Biosheet", as a novel esophageal scaffold in a beagle model.

METHODS

We prepared Biosheets by embedding specially designed molds into subcutaneous pouches in beagles. After 1-2months, the molds, which were filled with ingrown connective tissues, were harvested. Rectangular-shaped Biosheets (10×20mm) were then implanted to replace defects of the same size that had been created in the cervical esophagus of the beagle. An endoscopic evaluation was performed at 4 and 12weeks after implantation. The esophagus was harvested and subjected to a histological evaluation at 4 (n=2) and 12weeks (n=2) after implantation. The animal study protocols were approved by the National Cerebral and Cardiovascular Centre Research Institute Committee (No. 16048).

RESULTS

The Biosheets showed sufficient strength and flexibility to replace the esophagus defect. All animals survived with full oral feeding during the study period. No anastomotic leakage was observed. An endoscopic study at 4 and 12weeks after implantation revealed that the anastomotic sites and the internal surface of the Biosheets were smooth, without stenosis. A histological analysis at 4weeks after implantation demonstrated that stratified squamous epithelium was regenerated on the internal surface of the Biosheets. A histological analysis at 12weeks after implantation showed the regeneration of muscle tissue in the implanted Biosheets.

CONCLUSION

The long-term results of patch esophagoplasty using Biosheets showed regeneration of stratified squamous epithelium and muscular tissues in the implanted sheets. These results suggest that Biosheets may be useful as a novel esophageal scaffold.

Airway reconstruction using decellularized tracheal allografts in a porcine model

PURPOSE

Tracheal cartilage reconstruction is an essential approach for the treatment of tracheal congenital abnormalities or injury. Here, we evaluated the use of allogeneic decellularized tracheas as novel support scaffolds.

METHODS

Six weaned pigs (4-week-old domestic males) were transplanted with allogeneic tracheal graft patches (three decellularized and three fresh tracheal scaffolds) onto artificial defects (approximately 15 × 15 mm). After 11 weeks, the tracheas were evaluated by bronchoscopy and histological studies.

RESULTS

No pigs displayed airway symptoms during the observation period. Tracheal lumen restored by fresh graft patches showed more advanced narrowing than that treated with decellularized grafts by bronchoscopy. Histologically, fresh grafts induced typical cellular rejection; this was decreased with decellularized grafts. In addition, immunohistochemistry demonstrated regenerating foci of recipient cartilage along the adjacent surface of decellularized tracheal grafts.

CONCLUSION

Decellularized allogeneic tracheal scaffolds could be effective materials for restoring impaired trachea.

Adhesive coatings based on melanin-like nanoparticles for surgical membranes

Adhesive coatings for implantable biomaterials can be designed to prevent material displacement from the site of implant. In this paper, a strategy based on the use of melanin-like nanoparticles (MNPs) for the development of adhesive coatings for polysaccharidic membranes was devised. MNPs were synthesized in vitro and characterized in terms of dimensions and surface potential, as a function of pH and ionic strength. The in vitro biocompatibility of MNPs was investigated on fibroblast cells, while the antimicrobial properties of MNPs in suspension were evaluated on E. coli and S. aureus cultures. The manufacturing of the adhesive coatings was carried out by spreading MNPs over the surface of polysaccharidic membranes; the adhesive properties of the nano-engineered coating to the target tissue (intestinal serosa) were studied in simulated physiological conditions. Overall, this study opens for novel approaches in the design of naturally inspired nanostructured adhesive systems.

PLGA-PTMC-Cultured Bone Mesenchymal Stem Cell Scaffold Enhances Cartilage Regeneration in Tissue-Engineered Tracheal Transplantation

The treatment of long-segment tracheal defect requires the transplantation of effective tracheal substitute, and the tissue-engineered trachea (TET) has been proposed as an ideal tracheal substitute. The major cause of the failure of segmental tracheal defect reconstruction by TET is airway collapse caused by the chondromalacia of TET cartilage. The key to maintain the TET structure is the regeneration of chondrocytes in cartilage, which can secrete plenty of cartilage matrices. To address the problem of the chondromalacia of TET cartilage, this study proposed an improved strategy. We designed a new cell sheet scaffold using the poly(lactic-co-glycolic acid) (PLGA) and poly(trimethylene carbonate) (PTMC) to make a porous membrane for seeding cells, and used the PLGA-PTMC cell-scaffold to pack the decellularized allogeneic trachea to construct a new type of TET. The TET was then implanted in the subcutaneous tissue for vascularization for 2 weeks. Orthotopic transplantation was then performed after implantation. The efficiency of the TET we designed was analyzed by histological examination and biomechanical analyses 4 weeks after surgery. Four weeks after surgery, both the number of chondrocytes and the amount of cartilage matrix were significantly higher than those contained in the traditional stem-cell-based TET. Besides, the coefficient of stiffness of TET was significantly larger than the traditional TET. This study provided a promising approach for the long-term functional reconstruction of long-segment tracheal defect, and the TET we designed had potential application prospects in the field of TET reconstruction.