Nitrogen and sulfur co-doped highly luminescent carbon dots for sensitive detection of Cd (II) ions and living cell imaging applications

Absorption and Fluorescence Emission Investigations on Supramolecular Assemblies of Tetrakis-(4-sulfonatophenyl)porphyrin and Graphene Quantum Dots

The one-pot synthesis of N-doped graphene quantum dots (GQDs), capped with a positively charged polyamine (trien), has been realized through a microwave-assisted pyrolysis on solid L-glutamic acid and trien in equimolar amounts. The resulting positively charged nanoparticles are strongly emissive in aqueous solutions and are stable for months. The interaction with the anionic tetrakis(4-sulphonatophenyl)porphyrin (TPPS4) has been investigated at neutral and mild acidic pH using a combination of UV/vis absorption spectroscopy together with static and time-resolved fluorescence emission. At pH = 7, the experimental evidence points to the formation of a supramolecular adduct mainly stabilized by electrostatic interactions. The fluorescence emission of the porphyrin is substantially quenched while GQDs remain still emissive. On decreasing the pH, protonation of TPPS4 leads to formation of porphyrin J-aggregates through the intermediacy of the charged quantum dots.

Amide-decorated carbon dots as sensitive and selective probes for fluorescence enhancement detection of cadmium ion

As highly toxic metal ions, cadmium ions (Cd2+) are prevalent in varying concentrations around the world. The establishment of an accurate and effective method for Cd2+ determination with high sensitivity and selectivity is of particular concern. The present work fabricated a fluorescence chemosensor for the detection of Cd2+ based on functionalized carbon dots (CDs), which were hydrothermally prepared using amidated hyperbranched-polyethyleneimine (HPEI). As investigated by FTIR, NMR, and XPS, the stably grafted amide groups endowed the CDs with thermosensitivity and high cloud point due to the change in hydrophilic-hydrophobic behaviors. The CDs chemosensor with optimal amidation degree exhibited high sensitivity, selectivity, and stability in the determination of Cd2+ from various water environments. Notably, the fluorescence intensity enhanced with the increase of Cd2+ concentration, originating from the improved structure rigidity caused by the interactions between grafted amides and Cd2+. These impressive features made the CDs not only sensitive to detecting Cd2+ in low-concentration solutions with a limit of detection of 3.41 nM (the lowest known value for Cd2+ detection) but also accurate for the quantification in high-concentration solutions with a detectable Cd2+ concentration of 6.0 × 10-2 M. Owing to the broad detection range, the CDs developed in present work show great potential applications in various scenarios.

Carbon dots and composite materials with excellent performances in cancer-targeted bioimaging and killing: a review

Carbon dots (CDs) are nanomaterials with excellent properties, including good biocompatibility, small size, ideal photoluminescence and surface modification, and are becoming one of the most attractive nanomaterials for the imaging, detection and treatment of tumors. Based on these advantages, CDs can be combined other materials to obtain composite particles with improved, even new, performance, mainly in photothermal and photodynamic therapies. This paper reviews the research progress of CDs and their composites in targeted tumor imaging, detection, diagnosis, drug delivery and tumor killing. It also discusses and proposes the challenges and perspectives of their future applications in these fields. This review provides ideas for future applications of novel CD-based materials in the diagnosis and treatment of cancer.

Preparation of biochar-based surface molecularly imprinted polymers and evaluation of their selective adsorption and removal of carbaryl from rice and corn

The residue of carbaryl in food is a threat to human health. In this study, activated soybean shell biochar (A-SBC) was used as a carrier, methacrylic acid (MAA) was used as a functional monomer, and carbaryl was used as a template molecule to synthesize the activated biochar surface molecularly imprinted polymer (A-SBC@MIP). The synthesized A-SBC@MIP was characterized by SEM, FT-IR, XRD and XPS techniques, and then applied as adsorbent for carbaryl removal. The adsorption capacity of A-SBC@MIP for carbaryl was 8.6 mg‧g-1 and the imprinting factor was 1.49 at the optimum ionic strength and pH. The kinetic and isothermal data indicated that it had fast mass transfer rate and high binding capacity(Qmax=47.9 mg‧g-1). A-SBC@MIP showed good regenerative properties and the adsorption of carbaryl was excellent in its structural analogues. A solid-phase extraction (SPE) column composed of A-SBC@MIP was developed for the detection of rice and corn under optimized conditions, with recoveries of 93-101% for the spiked carbaryl. The limit of detection (LOD) of the method was 3.6 μg‧kg-1 with good linearity (R2=0.994) in the range of 0.01-5.00 mg‧L-1. The results show that the developed MIPs-SPE can enrich carbaryl from food samples as a specific and cost-effective method.

ZnO-decorated green-synthesized multi-doped carbon dots from Chlorella pyrenoidosa for sustainable photocatalytic carbamazepine degradation

The promising green synthesis of carbon dots (CDs) from microalga Chlorella pyrenoidosa was achieved using simple hydrothermal and microwave-assisted methods. Doping of nanomaterials by nonmetals (N, S, and P) was confirmed by X-ray photoelectron spectroscopy (XPS), while the existence of metals in the CDs was confirmed by inductively coupled plasma optical emission spectroscopy (ICP-OES) and transmission electron microscopy (TEM), and Mg, Ca, K, and Na were found as the dominant doped metals. The novel nanomaterials with excellent photoluminescence (PL) properties were used for the modification of ZnO obtained by a simple hydrothermal process. In this regard, a series of ZnO decorated with multi-doped carbon dots (xCDs) was prepared and their photocatalytic properties were evaluated. The ZnO-xCD photocatalysts were characterized by various advanced techniques including X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), XPS, Brunauer-Emmett-Teller (BET), PL, ultraviolet-visible (UV-vis) spectroscopy and electrochemical impedance spectroscopy (EIS) analysis. The photocatalytic behaviour of the obtained materials was investigated in the degradation of carbamazepine (CBZ). The influence of the synthesis method of xCDs and their content on the activity of the photocatalyst was examined. The photocatalyst ZnO modified with 3% xCDs obtained by the microwave-assisted method revealed the highest effectiveness for CBZ degradation and allowed for a first-order degradation rate of 2.85 times in comparison with non-modified ZnO. The improvement of the photocatalytic process was achieved by support with peroxymonosulphate resulting in up to 3.18 times a first order kinetic rate constant compared with that of simple photocatalysis in the presence of ZnO-xCDs. Taken together, our synthesized multi-doped CDs and their nanohybrids with ZnO, can be considered as promising candidates for photocatalytic applications.

Synthesis, properties and potential applications of photoluminescent carbon nanoparticles: A review

Photoluminescent-carbon nanoparticles (PL-CNPs) are a new class of materials that received immense interest among researchers due to their distinct characteristics, including photoluminescence, high surface-to-volume ratio, low cost, ease of synthesis, high quantum yield, and biocompatibility. By exploiting these outstanding properties, many studies have been reported on its utility as sensors, photocatalysts, probes for bio-imaging, and optoelectronics applications. From clinical applications to point-of-care test devices, drug loading to tracking of drug delivery, and other research innovations demonstrated PL-CNPs as an emerging material that could substitute conventional approaches. However, some of the PL-CNPs have poor PL properties and selectivity due to the presence of impurities (e.g., molecular fluorophores) and unfavourable surface charges by the passivation molecules, which impede their applications in many fields. To address these issues, many researchers have been paying great attention to developing new PL-CNPs with different composite combinations to achieve high PL properties and selectivity. Herein, we thoroughly discussed the recent development of various synthetic strategies employed to prepare PL-CNPs, doping effects, photostability, biocompatibility, and applications in sensing, bioimaging, and drug delivery fields. Moreover, the review discussed the limitations, future direction, and perspectives of PL-CNPs in possible potential applications.

Be-original break new ground: Fluorescence sensing of humic acid in natural water and soil by pitaya seed carbon dots

Pitaya seed carbon dots (P-CDs) with good biocompatibility were synthesized by hydrothermal method using natural biological matrix as carbon source, which applied to the detection of humic acid (HA) for the first time. So far, there is no report on the use of biomatrix-derived carbon dots for the detection of HA. This method can bring less pollution to the detection process of HA, which is very important to ensure lower cost, environmental safety and minimized energy consumption. In addition, it was worth noting that, based on the concept of green chemistry, the preparation process of P-CDs is simple, and the fluorescence method is used for analysis. Based on the fluorescence resonance energy transfer (FRET) mechanism, the detection of HA in water and soil can be realized in a short time. The results matched those of high-performance liquid chromatography (HPLC), suggesting that it shows great potential in water and soil quality monitoring.

Highly efficient carbon dots for quantitatively visualizing pH fluctuations in cells, zebrafish, mice and tumors

In vivo pH is closely related to complicated physiological and pathological processes. Quantitatively probing pH and visualizing pH variation via fluorescence (FL) imaging technique in living cells and organisms is crucial but difficult to accomplish. Herein, green fluorescent carbon dots (CDs) were synthesized, and their distinct advantages of extraordinarily high fluorescence quantum yield (FQY, 71.4%), unique photostability, high selectivity, sterling biocompatibility, appropriate pKa for biosensing, enable CDs to serve as pH-activatable probes for real time quantitative detection of continuous pH fluctuation in living cells, zebrafish, mice and tumors. We believe CDs are presently among the best-of-breed pH probes for comprehensive biomedical applications.

Construction of ratiometric fluorescence sensor and test strip with smartphone based on dual-emission carbon dots for the specific detection of chlortetracycline

Concerns about environmental and food contamination caused by chlortetracycline (CTC) residues have prompted people to explore efficient and convenient CTC monitoring platforms. However, the reported fluorescent probes generally fail to selectively detect CTC due to the structural similarity of tetracycline antibiotics. Herein, an intrinsic dual-emission carbon dots (D-CDs) ratiometric fluorescence sensor was prepared for highly sensitive and selective determination of CTC over other tetracyclines by one-step synthesis. The sensor exhibited a significant fluorescence enhancement at 425 nm after introducing CTC. The fluorescence "turn on" of the sensing system is due to aggregation-induced emission (AIE) phenomenon formed by hydrogen bonds and π conjugation promoting the specific recognition of CTC by D-CDs. The linear detection varied from 0.98 to 143.67 ng mL^-1 with a low limit of detection (LOD) of 1.29 ng mL^-1 (R² = 0.998), which was lower than most reported in the literature. The D-CDs sensor was applied to detect CTC in spiked milk, blocked normal human serum, and fish samples with recoveries of 95.5-104.2% and relative standard deviations (RSDs) of 2.6%. Particularly, D-CDs based test papers with a smartphone were prepared for portable and visual detection of CTC by analyzing the various color changes of RGB of fluorescence color, with an LOD of 7.18 ng mL^-1 (R² = 0.9909). The fluorescence sensor designed in this work could be used as a rapid tool with high performance and selectivity for monitoring control in foods.

One-step synthesis of highly fluorescent carbon dots as fluorescence sensors for the parallel detection of cadmium and mercury ions

Cadmium (Cd2+) and mercury ions (Hg2+) are essential for the quality control of food samples because of their serious toxicity to human health, but the effective and simple strategy for their parallel detection remains challenging. In this paper, a rapid and simple parallel detection method for Cd2+ and Hg2+ was developed using carbon dots (CDs) as fluorescent sensors. A one-step hydrothermal method with a single precursor l-arginine as both the carbon and nitrogen sources was employed to prepare nitrogen-doped CDs (N-CDs). N-CDs exhibited a uniform particle size and excitation-independent fluorescence emission. The maximum emission wavelength of N-CDs was observed at 354 nm with the excitation wavelength at 295 nm. The quantum yield of N-CDs reached as high as 71.6% in water. By using sodium diphosphate and phytic acid as masking agents, the fluorescent sensor can be quenched by Cd2+ and Hg2+ in the linear range of 0–26.8 μM and 0–49.9 μM within 5 min. Other common ions in farm products showed no significant effect on the fluorescence intensity of the sensing system. The results demonstrated that the sensing system had good selectivity and sensitivity for Cd2+ and Hg2+. The detection limits for Cd2+ and Hg2+ were 0.20 and 0.188 μM, respectively. In addition, the fluorescent sensor had been successfully applied for the detection of Cd2+ and Hg2+ in fruits and vegetables, and the recoveries were 86.44–109.40% and 86.62–115.32%, respectively. The proposed fluorescent sensor provides a rapid, simple, and sensitive detection method for Cd2+ and Hg2+ in food samples and thus a novel quantitative detection method for heavy metal ions in foods.

Carbon dots for multicolor cell imaging and ultra-sensitive detection of multiple ions in living cells: One Stone for multiple Birds

Given the significant impact of ions on environment pollution and human health, it is urgently needed to establish effective and convenient ion detection approaches, particularly in living cells. In this paper, we constructed multicolor N-doped-carbon dots (mPD-CDs) by facile one-step hydrothermal carbonization of m-phenylenediamine (mPD). mPD-CDs were successfully deployed for multicolor cellular imaging for animal cells, fungi, and bacteria in a wash-free way with high photostability and satisfactory biocompability. Moreover, mPD-CDs can be used as a fluorescent sensing probe for ultrasensitive detection of both iodide ion (I^-) and typical heavy metals such as cadmium (Cd²⁺), copper (Cu²⁺), mercury (Hg²⁺), gadolinium (Gd³⁺), ferrous ion (Fe²⁺), Zinc (Zn²⁺), and ferric ion (Fe³⁺). This is the first report using CDs as optical sensing probe for the detection of Gd³⁺, and for detection of Fe³⁺ with fluorescence "turn on". More significantly, with these versatile and fascinating properties, we applied mPD-CDs for intracellular ion detection in living cells like Hep G2 and S. cerevisiae, and zebra fish. Altogether, mPD-CDs displayed great potential for multicolor cell imaging and the multiple ion detection in vitro and in vivo, presenting a promising strategy for in-situ ultrasensitive sensing of multiple metal ions in the environment and the biological systems.

Facile Synthesis of N, S-Doped Carbon Quantum Dots from Food Waste as Fluorescent Probe for Sensitive Detection of Thiamphenicol and Its Analogues in Real Food Samples along with an Application in Bioimaging

Herein, N, S co-doped carbon quantum dots (N, S-CDs) with high absolute quantitative yield (Abs-QY) of 50.2% were produced by hydrothermal treatment of food residue crayfish shells. A new detection method of thiamphenicol (TAP) and its analogues was established by discovering the obvious fluorescence response between TAP and N, S-CDs, which achieved a wide linear range of 20–300 μg·L⁻¹ with a detection limit (LOD) of 11.12 μg·L⁻¹. This novel probe exhibited strong sensitivity and shows rapid response in complex food matrices (overall detection time is less than 45 min) mainly induced by static quenching. Spiked food sample recovery ranged from 97.3 to 99.34%. Further, the cell experiments of N, S-CDs were conducted, and the cell viability remained 91.76% under high concentration of N, S-CDs due to the environmentally friendly materials. The low cytotoxicity and good cytocompatibility make these N, S-CDs compatible for cell bioimaging and intracellular detection of TAP.

Facile and Green Synthesis of Highly Fluorescent Carbon Quantum Dots from Water Hyacinth for the Detection of Ferric Iron and Cellular Imaging

Natural biomass is used for facile synthesis of carbon quantum dots (CQDs) with high fluorescence, owing to its abundance, low cost, and eco-friendliness. In this study, a bottom-up hydrothermal method was used to prepare CQDs from water hyacinth (wh) at a constant temperature of 180 °C for 12 h. The synthesized wh-CQDs had uniform size, amorphous graphite structure, high water solubility (containing multiple hydroxyl and carboxyl groups on the surface), excitation light-dependent characteristics, and high photostability. The results showed that the aqueous solution of CQDs could detect Fe³⁺ rapidly, sensitively, and highly selectively with a detection limit of 0.084 μM in the linear range of 0–330 μM, which is much lower than the detection limit of 0.77 μM specified by the World Health Organization. More importantly, because the wh-CQDs were synthesized without any additives, they exhibited low toxicity to Klebsiella sp. cells even at high concentrations. Moreover, wh-CQDs emitted bright blue fluorescence in Klebsiella sp. cells, indicating its strong penetrating ability. Correspondingly, the fluorescent cell sorting results also revealed that the proportion of cell internalization reached 41.78%. In this study, wh-CQDs derived from natural biomass were used as high-performance fluorescent probes for Fe³⁺ detection and Klebsiella sp. imaging. This study is expected to have great significance for the application of biomass carbon spots in the field of cellular imaging and biology.

An insight into the potentials of carbon dots for in vitro live-cell imaging: recent progress, challenges, and prospects

Carbon dots (CDs) are a strong alternative to conventional fluorescent probes for cell imaging due to their brightness, photostability, tunable fluorescence emission, low toxicity, inexpensive preparation, and chemical diversity. Improving the targeting efficiency by modulation of the surface functional groups and understanding the mechanisms of targeted imaging are the most challenging issues in cell imaging by CDs. Firstly, we briefly discuss important features of fluorescent CDs for live-cell imaging application in this review. Then, the newest modulated CDs for targeted live-cell imaging of whole-cell, cell organelles, pH, ions, small molecules, and proteins are elaborately discussed, and their challenges in these fields are explained.

Cadmium induced aggregation of orange-red emissive carbon dots with enhanced fluorescence for intracellular imaging

Cadmium is a notorious toxic heavy metal, that poses serious threat to human health. Sensitive and selective detection of cadmium in cells is of great significance in poison screening and disease diagnosis. Orange-red emissive carbon dots (OR-CDs), prepared from the calcination of selected carbon sources 5-amino-1, 10-phenanthroline (Aphen) and salicylic acid (SA), were found to act as a "turn on" type fluorescence probe for Cd²⁺ detection. The structure and optical properties of OR-CDs were comprehensively investigated by both experimental characterizations and density functional theory (DFT) calculations. The OR-CDs consist of a basic unit of nine aromatic rings, and the N/O binding sites on the OR-CDs can specifically bind with Cd²⁺, leading to aggregation induced enhanced emission (AIEE). A detection limit of 0.30 μM was achieved for Cd²⁺ with a linear range of 0.80-100 μM. OR-CDs can not only be used for intracellular Cd²⁺ imaging but also have the potential to alleviate cadmium poison in living organisms.

A highly selective and sensitive "on-off" fluorescent probe for detecting cadmium ions and l-cysteine based on nitrogen and boron co-doped carbon quantum dots

Cadmium ions (Cd2+) have caused relatively serious pollution, threatening human health and ecosystems. l-Cysteine (l-Cys) is an essential amino acid in living organisms and concentration of l-Cys is closely related to some human diseases. In this work, we first introduced 2-amino-3-hydroxypyridine and sodium borohydride as the nitrogen source and boron source to fabricate boron and nitrogen co-doped carbon quantum dots (N,B-CQDs) with high fluorescence quantum yield (21.2%), which were synthesized through a simple, low-consumption and pollution-free one-pot hydrothermal method. The obtained N,B-CQDs are able to detect Cd2+ rapidly and sensitively through fluorescence enhancement, which may be ascribed to chelation enhanced fluorescence that is induced by the formation of the N,B-CQDs/Cd2+ complex. Simultaneously, N,B-CQDs can be used to detect l-cysteine because significant fluorescence quenching was observed when l-Cys was added into the N,B-CQDs/Cd2+ system. In the two fluorescence "turn-on" and "turn-off" processes, this fluorescent probe obtained a good linear relationship over Cd2+ concentration ranging from 2.5 µM to 22.5 µM with a detection limit of 0.45 µM, while the concentration of l-cysteine showed a linear relationship in the range of 2.5-17.5 µM with a detection limit of 0.28 µM. The sensor has been successfully used to detect Cd2+ and l-cysteine in real samples with satisfying results.

Preparation and Characterization of Photoluminescent Graphene Quantum Dots from Watermelon Rind Waste for the Detection of Ferric Ions and Cellular Bio-Imaging Applications

Graphene quantum dots (GQDs) were synthesized using watermelon rind waste as a photoluminescent (PL) agent for ferric ion (Fe3+) detection and in vitro cellular bio-imaging. A green and simple one-pot hydrothermal technique was employed to prepare the GQDs. Their crystalline structures corresponded to the lattice fringe of graphene, possessing amide, hydroxyl, and carboxyl functional groups. The GQDs exhibited a relatively high quantum yield of approximately 37%. Prominent blue emission under UV excitation and highly selective PL quenching for Fe3+ were observed. Furthermore, Fe3+ could be detected at concentrations as low as 0.28 μM (limit of detection), allowing for high sensitivity toward Fe3+ detection in tap and drinking water samples. In the bio-imaging experiment, the GQDs exhibited a low cytotoxicity for the HeLa cells, and they were clearly illuminated at an excitation wavelength of 405 nm. These results can serve as the basis for developing an environment-friendly, simple, and cost-effective approach of using food waste by converting them into photoluminescent nanomaterials for the detection of metal ions in field water samples and biological cellular studies.

Sulfhydryl functionalized carbon quantum dots as a turn-off fluorescent probe for sensitive detection of Hg2

Mercury ion (Hg2+) is one of the most toxic heavy metal ions and lowering the detection limit of Hg2+ is always a challenge in analytical chemistry and environmental analysis. In this work, sulfhydryl functionalized carbon quantum dots (HS-CQDs) were synthesized through a one-pot hydrothermal method. The obtained HS-CQDs were able to detect mercury ions Hg2+ rapidly and sensitively through fluorescence quenching, which may be ascribed to the formation of nonfluorescent ground-state complexes and electron transfer reaction between HS-CQDs and Hg2+. A modification of the HS-CQD surface by -SH was confirmed using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The HS-CQDs sensing system obtained a good linear relationship over a Hg2+ concentration ranging from 0.45 μM to 2.1 μM with a detection limit of 12 nM. Delightfully, the sensor has been successfully used to detect Hg2+ in real samples with satisfactory results. This means that the sensor has the potential to be used for testing actual samples.

Recent progress in cadmium fluorescent and colorimetric probes

Cadmium is a heavy metal which exists widely in industrial and agricultural production and can induce a variety of diseases in organisms. Therefore, its detection is of great significance in the fields of biology, environment and medicine. Fluorescent probe has been a powerful tool for cadmium detection because of its convenience, sensitivity, and bioimaging capability. In this paper, we reviewed 98 literatures on cadmium fluorescent sensors reported from 2017 to 2021, classified them according to different fluorophores, elaborated the probe design, application characteristics and recognition mode, summarized and prospected the development of cadmium fluorescent and colorimetric probes. We hope to provide some help for researchers to design cadmium fluorescent probes with higher selectivity, sensitivity and practicability.

Cadmium is a heavy metal which exists widely in industrial and agricultural production and can induce a variety of diseases in organisms.

Facile synthesis of biomass waste-derived fluorescent N, S, P co-doped carbon dots for detection of Fe3+ ions in solutions and living cells

Fluorescent carbon dots derived from natural biomass have received widespread attention in recent years due to their superior optical and chemical properties. In this work, we proposed a method to synthesize fluorescent nitrogen, sulfur, and phosphorus co-doped carbon dots (NSP-CDs) using biomass waste as a precursor. The blue emitting carbon dots were prepared from the seeds of green pepper, and Fe3+ ions could quench the fluorescence of NSP-CDs. Therefore, a fluorescent "turn-off" sensor based on NSP-CDs was constructed for the detection of Fe3+ ions. Further, NSP-CDs were evaluated as a fluorescent biosensor for the detection of Fe3+ in tap water and lake water samples, showing their potential value in practical applications. The cytotoxicity test further confirmed that NSP-CDs have good biocompatibility and can be extended to cell imaging and intracellular Fe3+ detection. The proposed method is simple, economical and green, which can meet the requirements of environmental monitoring and biological imaging.

Green synthesis of multipurpose carbon quantum dots from red cabbage and estimation of their antioxidant potential and bio-labeling activity

We present a green synthesis of fluorescent carbon quantum dots (CQDs) by using red cabbage (rc) and a one-step hydrothermal approach. The rcCQDs were characterized by various techniques such as UV-visible spectroscopy, transmission electron microscopy (TEM), high-resolution TEM, Fourier-transform infrared spectroscopy, atomic force microscopy (AFM), and X-ray photoelectron spectroscopy. The synthesized rcCQDs exhibited an average size of 3 nm, measured by TEM, blue fluorescence, and a quantum yield of 8.3%. The highest emission band was observed at approximately 402 nm when excited at 330 nm. The rcCQDs exhibited strong antioxidant activities by scavenging 61, 56, and 91% against 2, 2-diphenyl-1-picrylhydrazyl, hydroxyl, and potassium permanganate radicals, respectively. The scavenging activity of rcCQDs was comparable with that of standard antioxidant L-ascorbic acid. Cell Counting Kit (CCK)-8 assay depicted superior bio-compatibility and negligible cytotoxicity of rcCQDs on SH-SY5Y neuroblastoma cells. They were used as a fluorescent probe for bio-labeling of Escherichia coli and Staphylococcus aureus. The viabilities of the labeled bacterial cells were analyzed by AFM and UV-visible spectroscopy. Furthermore, the rcCQDs were utilized as a fluorescent ink, an alternative to pens, and maybe suitable for paints and varnish agents. This study provides detailed mechanistic insights into the antioxidant activity of as-synthesized rcCQDs, which suggest the practical applicability of CQDs for bio-medical applications. Key points • Carbon quantum dots were prepared from red cabbage using the hydrothermal method. • The scavenging activity of rcCQDs was evaluated for DPPH, OH, and KMnO₄radicals. • The rcCQDs were used for the labeling of foodborne bacteria. • The rcCQDs could be utilized as fluorescent ink. Graphical abstract Schematic representation of CQDs prepared from red cabbage (rc) with multifunctional applications.

Fluorescent-Nitrogen-Doped Carbon Quantum Dots Derived from Citrus Lemon Juice: Green Synthesis, Mercury(II) Ion Sensing, and Live Cell Imaging

In this study, we report a green and economical hydrothermal synthesis of fluorescent-nitrogen-doped carbon quantum dots (NCQDs) using citrus lemon as a carbon source. The prepared NCQDs possess high water solubility, high ionic stability, resistance to photobleaching, and bright blue color under ultraviolet radiation with a high quantum yield (∼31%). High-resolution transmission electron microscopy (HRTEM) results show that the prepared NCQDs have a narrow size distribution (1-6 nm) with an average particle size of 3 nm. The mercury ion (Hg2+) sensing efficiency of the NCQDs was studied, and the result indicated that the material has high sensitivity, high precision, and good selectivity for Hg2+. The limit of detection (LOD) is 5.3 nM and the limit of quantification (LOQ) is 18.3 nM at a 99% confidence level. The cytotoxicity was evaluated using MCF7 cells, and the cell viabilities were determined to be greater than 88% upon the addition of NCQDs over a wide concentration range from 0 to 2 mg/mL. Based on the low cytotoxicity, good biocompatibility, and other revealed interesting merits, we also applied the prepared NCQDs as an effective fluorescent probe for multicolor live cell imaging.

Recent Advances in Functionalized Carbon Dots toward the Design of Efficient Materials for Sensing and Catalysis Applications

Since the past decade, enormous research efforts have been devoted to the detection/degradation and quantification of environmental toxic pollutants and biologically important molecules due to their ubiquitous necessity in the fields of environmental protection and human health. These fields of sensor and catalysis are advanced to a new era after emerging of nanomaterials, especially, carbon nanomaterials including graphene, carbon nanotube, carbon dots (C-dots), etc. Among them, the C-dots in the carbon family are rapidly boosted in the aspect of synthesis and application due to their superior properties of chemical and photostability, highly fluorescent with tunable, non/low-toxicity, and biocompatibility. The C-dot-based functional materials have shown great potential in sensor and catalysis fields for the detection/degradation of environmental pollutants. The major advantage of C-dots is that they can be easily prepared from numerous biomass/waste materials which are inexpensive and environment-friendly and are suitable for a developing trend of sustainable materials. This review is devoted to the recent development (since 2017) in the synthesis of biomass- and chemical-derived C-dots as well as diverse functionalization of C-dots. Their capability as a sensor and catalyst and respective mechanism are summarized. The future perspectives of C-dots are also discussed.

CdS quantum dots/Au nanoparticles/ZnO nanowire array for self-powered photoelectrochemical detection of Escherichia coli O157:H7

In this paper, the hydrothermally grown ZnO nanowire array (NWs) was modified by Au nanoparticles (NPs) and CdS quantum dots (QDs) to construct a high-performance photoelectrochemical (PEC) electrode. The aligned ZnO NWs, which decorated Au NPs and CdS QDs have the effective light absorption range from UV to visible region. This hybrid structure provided a self-powered PEC electrode with a favorable energy-band configuration for fast charge separation and transportation. Meanwhile, the Au NPs and CdS QDs also made increase of the surface area to improve the immobilization of the analytes. After assembling aptamer as recognition element, this composite nanoarray was further developed as a self-powered PEC biosensor by synergizing above multiple enhancement factors. The PEC aptasensor exhibited a rapid response in a wide linear range of 10-10⁷ CFU/mL with the detection limit as low as 1.125 CFU/mL to Escherichia coli O157:H7 (E. coli O157:H7). This approach would offer an alternative PEC transduction for fast environment monitoring and clinical diagnosis related to pathogenic bacteria.