Ag doped Sn3O4 nanostructure and immobilized on hyperbranched polypyrrole for visible light sensitized photocatalytic, antibacterial agent and microbial detection process

Evaluation of photocatalysis inactivation in indoor air purification of pathogenic microbes by using the different nanomaterials based on TiO2 nanomaterials

The photocatalytic technology for indoor air disinfection has been broadly studied in the last decade. Selecting proper photocatalysts with high disinfection efficiency remains to be a challenge. By doping with the incorporation of metals, the bandgap can be narrowed while avoiding the recombination of photogenerated charge. Three photocatalysts (Ag-TiO2, MnO2-TiO2, and MnS2-TiO2) were tested in photocatalytic sterilization process. The results revealed that Ag-TiO2 had the best antibacterial performance. Within 20 min, the concentration of Serratia marcescens (the tested bacteria) decreased log number of ln 4.04 under 640 w/m2 light intensity with 1000 µg/mL of Ag-TiO2. During the process of inactivating bacteria, the cell membranes of bacterial was destructed and thus decreasing the activity of enzymes and releasing the cell contents, due to the generation of reactive oxygen species (O2•- and •OH) and thermal effect. Spectral regulation has the greatest impact on the sterilization efficiency of MnO2-TiO2, which reduces the probability of photocatalytic materials being excited.

Photocatalytic, Antibacterial, Cytotoxic and Bioimaging Applications of Fluorescent CdS Nanoparticles Prepared in DNA Biotemplate

Synthesizing nanoparticles in biotemplates has been cited as one of the most promising way to obtain monodispersed inorganic nanoparticles. In this method, uniform voids in porous materials serve as hosts to confine the synthesized nanoparticles. DNA template can be described as a smart glue for assembling nanoscale building blocks. Here we investigate the photocatalytic, antibacterial, cytotoxic, and bioimaging applications of DNA capped CdS. XRD, SEM, TEM, UV-visible absorption, and photoluminescence spectra were used to study structural, morphological, and optical properties of CdS nanoparticles. Prepared CdS nanoparticles exhibit visible fluorescence. The photocatalytic activity of CdS towards Rhodamine 6G and Methylene blue are 64% and 91% respectively. A disc-diffusion method is used to demonstrate antibacterial screening. It was shown that CdS nanoparticles inhibit Gram-positive bacteria and Gram-negative bacteria effectively. DNA capped CdS shows higher activity than uncapped CdS nanoparticles. MTT cell viability assays were carried out in HeLa cells to investigate the cytotoxicity for 24 h. At a concentration 2.5 µg/ml, it shows 84% cell viability and 43% viability at 12.5 µg/ml. The calculated LC50 value is equal to 8 µg/ml. These DNA capped CdS nanoparticles were taken for an in-vitro experiment with HeLa cells to exhibit the possibility of bioimaging applications. The present study suggests that the synthesized CdS nanoparticles could be a potential photocatalyst, antibacterial agent, and biocompatible nanoparticle for bioimaging applications.

Design, synthesis and biological evaluation of new 1,ω-Bis-(5-alkyl-3-tosyl-1,3,4,2-triazaphospholino)alkanes as in vitro α-amylase and lipase inhibitors

A series of new 1,ω-bis-(5-alkyl-3-tosyl-1,3,4,2-triazaphospholino)alkanes 2 and 3 were obtained in excellent yields by the condensation of 1,ω-bis-(1-tosylamidrazone)alkanes 1 with two equivalent molars of Lawesson's Reagent (LR) and trisdimethylaminophosphine, respectively. All synthesized compounds were characterized by various spectroscopic techniques including IR, 1H NMR, 13C NMR and 31P NMR and elemental analysis. The newly synthesized compounds were evaluated against key enzymes related to diabetes and obesity such as α-amylase and lipase. This study showed that the compounds 3a and 2b are an excellent inhibitor of α-amylase (with IC50 = 18.8 mM) and lipase (with IC50 = 19 mM) respectively, as compared with standard, orlistat (IC50 = 22 mM). Among this series, compounds 3a and 2b with the CH3 or C2H5 group at position 6 were identified as the most potent inhibitors against α-amylase, and lipase enzymes. The remaining compounds were found to be moderately active. Further, molecular docking simulation studies were done to identify the interactions and binding mode of synthesized analogs at binding site of α-amylase and lipase enzymes.

Multifunctional Cu:ZnS quantum dots for degradation of Amoxicillin and Dye Sulphon Fast Black-F and efficient determination of urea for assessing environmental aspects

This work is particularly aimed at the preparation of ZnS and Cu doped ZnS (Cu:ZnS) QDs by facile and easy technique, chemical precipitation method for the degradation of water pollutants and a simple scheme was proposed to prepare the urea-sensing system. The morphological and optical properties of the synthesized QDs was studied using high resolution transmission and scanning electron microscopes, X-ray diffraction, energy dispersive X-ray analysis, fluorescence and ultraviolet-visible spectroscopy, differential thermal and thermogravimetric analyses, Brunauer-Emmett-Teller analysis. The photocatalytic performance was systematically assessed by the photodegradation of an important pharmaceutical water pollutant, Amoxicillin (AMX) and a dye Fast Sulphon Black F (SFBF) in aqueous medium under UV light irradiation. Also, a very sensitive system was prepared by depositing the dots over an indium-tin-oxide (ITO) glass substrate for the sensing of biologically active molecule urea as it is an important monitor of public health in water and soil productivity. The results illustrated excellent photocatalytic efficiency (86.46% for AMX and 99.41% for SFBF) with stability up to four cycles of degradation reaction. The optimal photocatalyst dosage for achieving maximum removal of AMX was found to be 70 mg at a pH of 9.5, with a treatment time of 40 min. Similarly, for SFBF, the optimal photocatalyst dosage was determined to be 60 mg at pH 9, with a treatment time of 60 min. Further, the electrochemical analysis was done by fabricating Urease enzyme (UR)/Cu:ZnS QDs/ITO bioelectrode and then the fabricated bioelectrode, was utilized to determine the different concentrations of urea by cyclic voltammetry. Thus, the obtained limit of detection and sensitivity of the fabricated biosensing device for urea detection was obtained to be 0.0092 μM and 12 μA μM-1cm-2, respectively; under the optimized experimental conditions. Hence, it is anticipated that Cu:ZnS QDs can also successfully be applied as a promising material for fabrication of novel bioelectrode for urea determination and the biosensing platform is desirable and viable.

Surface activity, kinetics, thermodynamics and comparative study of adsorption of selected cationic and anionic dyes onto H3PO4-functionalized bagasse from aqueous stream

The discharge of dyes into the water body creates toxicity to aquatic organisms because of their aromatic structure and difficult degradation. So, the treatment of dye-contaminated wastewater is required before releasing it. In the present study, thermally treated (600 °C) and H3PO4 (55%)-functionalized bagasse, henceforth called thermochemically activated bagasse (TCAB), was synthesized as potential adsorbent for the effective removal of selected cationic and anionic dyes from their aqueous stream. TCAB characterization was done employing FT-IR, SEM, XRD, zeta potential, BET, and PZC techniques. The comparative study shows that the relative adsorption on TCAB followed the sequence, methyl red (185 mg/g) > safranin (178 mg/g) > congo red (146 mg/g) > brilliant green (139 mg/g) > malachite green (130 mg/g) > bromocresol green (94 mg/g). The adsorption efficiency was investigated concerning the effect of change in TCAB dose (0.05-0.3 g/100 mL), initial dye concentration (20-200 mg/L), pH (4.0-10.0), ionic strength (0.1-0.5 M KCl), urea concentration (0.1-0.5 M) and temperature (25-45 °C). The representative adsorption isotherms belong to typical L-type. The time-dependent dye removal was best explained by the pseudo-second-order (PSO) kinetic model (R2 = 0.9859-0.9991), while equilibrium data were best explained by the Freundlich model (R2 = 0.9881-0.9961). Thermodynamic study showed the spontaneous (ΔG0 <0) and exothermic nature (ΔH0 <0) of the adsorption of different cationic and anionic dyes. The cyclic adsorption ability of TCAB for different dyes was checked up to three cycles (185 to 168 mg/L for MR, 178 to 165 mg/L for SF, 146 to 130 mg/L for CR, 139 to 127 mg/L for BG, 130 to 114 mg/L for MG and 94 to 80 mg/L for BCG), and no significant decrease in the adsorption capacity was noticed. So, the present study provides valuable insights into the adsorption of cationic and anionic dyes onto H3PO4-functionalized bagasse. Addressing the adsorptive aspects enhances the clarity, reliability and applicability of the study's findings and contributes to its overall scientific impact.

Nano-ciprofloxacin/meropenem exhibit bactericidal activity against Gram-negative bacteria and rescue septic rat model

Aim: We hypothesized that simultaneous administration of two antibiotics loaded into a nanopolymer matrix would augment their synergistic bactericidal interaction. Methods: Nanoplatforms of chitosan/Pluronic® loaded with ciprofloxacin/meropenem (CS/Plu-Cip/Mer) were prepared by the ionic gelation method, using Plu at concentrations in the range 0.5-4% w/v. CS/Plu-Cip/Mer was evaluated for antibacterial synergistic activity in vitro and in vivo. Results: CS/Plu-Cip and CS/Plu-Mer with Plu concentrations of 3% w/v and 2% w/v, respectively, exhibited ∼80% encapsulation efficiency. The MICs of pathogens were fourfold to 16-fold lower for CS/Plu-Cip/Mer than for Cip/Mer. Synergy was evidenced for CS/Plu-Cip/Mer with a bactericidal effect (at 1× MIC and sub-MICs), and it significantly decreased bacterial load and rescued infected rats. Conclusion: This study illustrates the ability of CS/Plu nanopolymer to intensify synergy between antibiotics, thereby providing a promising potential to rejuvenate antibiotics considered ineffective against resistant pathogens.

Photocatalytic and Enhanced Biological Activities of Schiff Base Capped Fluorescent CdS Nanoparticles

In the present work, biocompatible CdS nanoparticles were synthesized using Schiff base ligand, 3-((2-(-(1-(2hydroxyphenyl)ethylidene)amino)ethyl)imino)-2-pentone, by a simple ultrasonic irradiation method. The structural, morphological, and optical properties were studied using XRD, SEM, TEM, UV-visible absorption, and photoluminescence (PL) spectra. The quantum confinement effect of the Schiff base capped CdS nanoparticles was confirmed by using UV-visible and PL spectrum analysis. This CdS nanoparticles were an effective photocatalyst for degrading rhodamine 6G and methylene blue with a 70% and 98% degradation capacity, respectively. Furthermore, the disc-diffusion method demonstrated that CdS nanoparticles inhibit G-positive bacteria and G-negative bacteria more effectively. These Schiff base capped CdS nanoparticles were taken for an in-vitro experiment with HeLa cells to exhibit the possibility of providing optical probes in biological applications and observed under a fluorescence microscope. In addition, MTT cell viability assays were carried out to investigate the cytotoxicity for 24 h. As a result of this study, 2.5 µg/ml doses of CdS nanoparticles are suitable for imaging and are effective in destroying HeLa cells. The present study suggests that the synthesized Schiff base capped CdS nanoparticles could be a potential photocatalyst, antibacterial agent, and biocompatible nanoparticle for bioimaging applications.

The structure, characterization and immunomodulatory potential of exopolysaccharide produced by Planococcus rifietoensis AP-5 from deep-sea sediments of the Northwest Pacific

Polysaccharides derived from microorganisms exhibit diverse structures and bioactivities, making them promising candidates for the treatment of various diseases. However, marine-derived polysaccharides and their activities are relatively little known. In this work, fifteen marine strains were isolated from surface sediments in the Northwest Pacific Ocean for screening of EPS production. Planococcus rifietoensis AP-5 produced a maximum yield of EPS at 4.80 g/L. The purified EPS (referred to as PPS) had a molecular weight of 51,062 Da and contained amino, hydroxyl, and carbonyl groups as its major functional groups. PPS primarily consisted of →3)-α-D-Galp-(1 → 4)-α-D-Manp-(1 → 2)-α-D-Manp-(1 → 4)-α-D-Manp-(1 → 4,6)-α-D-Glcp-(1 → 6)-β-D-Galp-(1→, with a branch consisting of T-β-D-Glcp-(1→. Additionally, surface morphology of PPS was hollow, porous, and sphere-like stack. PPS primarily contained C, N, and O elements, with a surface area of 33.76 m2/g, a pore volume of 0.13 cc/g, and a pore diameter of 1.69 nm, respectively. Based on the TG curve, the degradation temperature of PPS was measured to be 247 °C. Furthermore, PPS demonstrated immunomodulatory activity through dose-dependently upregulating the expression level of cytokines. It significantly enhanced the cytokine secretion at a concentration of 5 μg/mL. To sum up, this study offers valuable insights for screening marine polysaccharide-based immunomodulators.

Efficient photocatalytic degradation of organic pollutants over TiO2 nanoparticles modified with nitrogen and MoS2 under visible light irradiation

Investigate the use of visible light to improve photocatalytic degradation of organic pollutants in wastewater. Nitrogen-doped titania and molybdenum sulfide nanocomposites (NTM NCs) with different weight ratios of MoS₂ (1, 2, and 3 wt.%) synthesized by a solid state method applied to the photodegradation of methylene blue(MB) under visible light irradiation. The synthesized NTM composites were characterized by SEM, TEM, XRD, FT-IR, UV-Vis, DRS and PL spectroscopy. The results showed enhanced activity of NTM hybrid nanocrystals in oxidizing MB in water under visible light irradiation compared to pure TiO₂. The photocatalytic performance of NTM samples increased with MoS₂ content. The results show that the photodegradation efficiency of the TiO₂ compound improved from 13 to 82% in the presence of N-TiO₂ and to 99% in the presence of MoS₂ containing N-TiO₂, which is 7.61 times higher than that of TiO₂. Optical characterization results show enhanced nanocomposite absorption in the visible region with long lifetimes between e/h+ at optimal N-TiO₂/MoS₂ (NTM₂) ratio. Reusable experiments indicated that the prepared NTM NCs photocatalysts were stable during MB photodegradation and had practical applications for environmental remediation.

Enhanced adsorption and co-adsorption of heavy metals using highly hydrophilicity amine-functionalized magnetic hydrochar supported MIL-53(Fe)-NH2: performance, kinetics, and mechanism studies

It is a "kill two birds with one stone" method to convert invasive plants into hydrochar via hydrothermal carbonization as well as coinciding with 3R rules (reduction, recycling, and reuse). In this work, a series of hydrochars (pristine, modified, and composite) derived from invasive plants Alternanthera philoxeroides (AP) were prepared and applied to the adsorption and co-adsorption of heavy metals (HMs) such as Pb(II), Cr(VI), Cu(II), Cd(II), Zn(II), and Ni(II). The results show that MIL-53(Fe)-NH₂- magnetic hydrochar composite (M-HBAP) displayed a strong affinity for HMs, which the maximum adsorption capacities for HMs were 153.80 (Pb(II)), 144.77 (Cr(VI)), 80.58 (Cd(II)), 78.62 (Cu(II)), 50.39 (Zn(II)), and 52.83(Ni(II)) mg/g (c₀ = 200 mg/L, t = 24 h, T = 25 ℃, pH = 5,2,6,4,6,5). This may be because the doping of MIL-53(Fe)-NH₂ enhanced the surface hydrophilicity of hydrochar, which allows hydrochar to disperse in the water within 0.12 s and possessed excellent dispersibility compared with pristine hydrochar (BAP) and amine-functionalized magnetic modified hydrochar (HBAP). Furthermore, the BET surface area of BAP was improved from 5.63 to 64.10 m²/g after doing MIL-53(Fe)-NH₂. M-HBAP shows a strong adsorption effect on the single HMs system (52-153 mg/g), while it decreased significantly (17-62 mg/g) in the mixed HMs system due to the competitive adsorption. Cr(VI) can produce strong electrostatic interaction with M-HBAP, Pb(II) can react with CaC₂O₄ on the surface of M-HBAP for chemical precipitation, and other HMs can react with functional groups on the surface of M-HBAP for complexation and ion exchange. In addition, five adsorption-desorption cycle experiments and vibrating sample magnetometry (VSM) curves also proved the feasibility of the M-HBAP application.

Detection of cytotoxins by sandwich-ELISA for discrimination of cobra envenomation and indication of necrotic severity

Snake envenoming is both a healthcare and socioeconomic problem for developing countries and underserved communities. In Taiwan, clinical management of Naja atra envenomation is a major challenge, since cobra venom-induced symptoms are usually confused with hemorrhagic snakebites and current antivenom treatments do not effectively prevent venom-induced necrosis for which early surgical debridement should be administered. Identification and validation of biomarkers of cobra envenomation is critical for progress in setting a realistic goal for snakebite management in Taiwan. Previously, cytotoxin (CTX) was determined as one of potential biomarker candidates; however, its ability to discriminate cobra envenoming remains to be verified, especially in clinical practice. In this study, we selected a monoclonal single-chain variable fragment (scFv) and a polyclonal antibody to develop a sandwich enzyme-linked immunosorbent assay (ELISA) for CTX detection, which successfully recognized CTX from N. atra venom over that from other snake species. Using this specific assay, the CTX concentration in envenoming mice was shown to remain consistent in about 150 ng/mL during the 2-hour post-injection period. The measured concentration was highly correlated with the size of local necrosis in mouse dorsal skin, which the correlation coefficient is about 0.988. Furthermore, our ELISA method displayed 100 % of specificity and sensitivity in discriminating cobra envenoming among snakebite victims through CTX detection and the level of CTX in victim plasma was ranged from 5.8 to 253.9 ng/mL. Additionally, patients developed tissue necrosis at plasma CTX concentrations higher than 150 ng/mL. Thus, CTX not only serves as a verified biomarker for discrimination of cobra envenoming but also a potential indicator of severity of local necrosis. In this context, detection of CTX may facilitate reliable identification of envenoming species and improve snakebite management in Taiwan.

An ultra-small fluorescence zero-valent iron nanoclusters selectively kill gram-positive bacteria by promoting reactive oxygen species generation

A list of the most dangerous bacteria that are multiple-drug resistance has been published by WHO, among which are various Gram-positive bacteria related with serious healthcare and community-associated infection. An effort is called for developing new strategies to combat the resistance, and nanomaterial-based approaches provide an ideal potential to mitigate the antimicrobial resistance as an alternative to antibiotics. Nanoscale zero-valent iron particles exhibited a good antimicrobial activity by triggering Fenton reaction, however, no zero-valent iron nanoclusters are developed as antimicrobial medical materials. In this work, a novel ultra-small zero-valent iron nanoclusters (usZVIN) was synthesized by one-step reduction in aqueous solutions, which exhibited bright red fluorescence at 616 nm. Interestingly, the usZVIN displayed an excellent selectively antibacterial activity against Gram-positive bacteria, and little effects on Gram-negative bacteria. The killing efficiency of usZVIN against S. aureus can reach 100 % with a concentration of 40 μg mL^-1 after 1 h incubation, whereas there is no killing effect of usZVIN against E.coli even with a concentration of 900 μg mL^-1 for 4 h. The antimicrobial mechanism of usZVIN was demonstrated to be the intracellular reactive oxygen species (ROS) production triggered by usZVIN due to its excellent peroxidase-like activity. Collectively, our findings suggested that usZVIN is a good medical-material candidate for fighting against Gram-positive bacterial infections, especially when we need leave beneficial Gram-negative bacteria intact.

Exploring the multipotentiality of plant extracts for the green synthesis of iron nanoparticles: A study of adsorption capacity and dye degradation efficiency

The goal of the project was to create environmentally friendly and economically viable materials for thoroughly purifying contaminated water. An affordable, phytogenic, and multifunctional plant-based nanomaterial was prepared in this context. The work demonstrates an effective green synthesis method for producing iron nanoparticles (FeNPs) using six different plant extracts as a reducing agent. The characterization of green synthesized catalysts was concluded via Spectroscopy (tauc plot), XRD, FE-SEM, and FT-IR. The produced nanomaterial, which had an X-ray diffractogram (XRD) peak at 43.33⁰ and a size range of 1.82-63.63 nm, functioned as a highly effective nano-photocatalyst for the degradation of cationic dye. Due to the presence of a lower overall secondary metabolites quota, Ocimum sanctum plant extract reduced iron precursor produced the highest yield of dried NPs, followed by Azadirachta indica, Prosopis cineraria, Syzygium cumini, Citrus limon, and Salvadora oleoides. Further, the synthesized catalyst was tested for its effectiveness against gentian violet dye degradation. Ocimum sanctum plant extract reduced iron precursor produced the highest yield of dried NPs, followed by Azadirachta indica, Prosopis cineraria, Syzygium cumini, Citrus limon, and Salvadora oleoides, in that order. The dye removal efficiency of nanoparticles was 51% (Azadirachta indica), 83% (Ocimum sanctum), 59% (Syzygium cumini), 40% (Salvadora oleoides), 59% (Prosopis cineraria), and 63% (Citrus limon) after 12 h of visible light irradiation. The key factor in the process of deterioration is •O^2-. As a result, the nanoparticles can be used in antibacterial and photocatalytic processes. The reduced band gap was responsible for the increased photocatalytic quantity. The maximum adsorption capacity at the time of equilibrium was obtained in order as Ocimum sanctum > Citrus limon > Prosopis cineraria > Syzygium cumini > Azadirachta indica > Salvadora oleoides. The simplicity of production, low cost, magnetic property, and high adsorption capacity will increase the efficacy of the water treatment method. This article reports on the creation of unique iron nanoparticles and their use in the purification of water.

Mesoporous carbon nitride supported MgO for enhanced CO2 capture

The growing concern about the environmental consequences of anthropogenic CO2 emissions significantly stimulated the research of low-cost, efficient, and recyclable solid adsorbents for CO2 capture. In this work, a series of MgO-supported mesoporous carbon nitride adsorbents with different MgO contents (xMgO/MCN) was prepared using a facile process. The obtained materials were tested for CO2 capture from 10 vol% CO2 mixture gas with N2 using a fixed bed adsorber at atmospheric pressure. At 25 ºC, the bare MCN support and unsupported MgO samples demonstrated CO2 capture capacities of 0.99, and 0.74 mmol g-1, respectively, which were lower than those of the xMgO/MCN composites.The incorporation of MgO into the MCN improved the CO2 uptake, and the 20MgO/MCN exhibited the highest CO2 capture capacity of 1.15 mmol g-1 at 25 °C. The improved performance of the 20MgO/MCN nanohybrid can be possibly assigned to the presence of high content of highly dispersed MgO NPs along with its improved textural properties in terms of high specific surface area (215 m2g-1), large pore volume (0.22 cm3g-1), and abundant mesoporous structure. The efffects of temperature and CO2 flow rate were also investigated on the CO2 capture performance of 20MgO/MCN. Temperature was found to have a negative influence on the CO2 capture capacity of the 20MgO/MCN, which decreased from 1.15 to 0.65 mmol g-1with temperature rise from 25 C to 150º C, due to the endothermicity of the process. Similarly, the capture capacity decreased from 1.15 to 0.54 mmol g-1 with the increase of the flow rate from 50 to 200 ml minute-1 respectively. Importantly, 20MgO/MCN showed excellent reusability with consistent CO2 capture capacity over five sequential sorption-desorption cycles, suggesting its suitability for the practical capture of CO2.

Upregulation of RIPK1 implicates in HEK 293T cell death upon transient transfection of A53T-α-synuclein

BACKGROUND

Alpha-synuclein (α-SN) is the central protein in synucleinopathies including Parkinson's disease. Nevertheless, the molecular mechanisms through which α-SN leads to neuronal death remain unclear.

METHODS

To elucidate the relationship between α-SN and apoptosis, some indicators of the intrinsic and extrinsic apoptotic cell death were assessed in normal and a stable HEK293T cell line expressing firefly luciferase after transfection with the wild-type (WT) and A53T mutant α-SN.

RESULTS

Opposite to WT-α-SN, overexpression of A53T-α-SN resulted in enhanced expression of almost two fold for RIPK1 (93.0 %), FADD (45 %), Caspase-8, and Casp-9 activity (52.0 %) in measured time. Transfection of both WT-α-SN and A53T-α-SN showed an increase in the Casp-3/Procasp-3 ratio (WT: 60.5 %; A53T: 41.0 %), Casp-3 activity (WT: 65.0 %; A53T: 20.5 %), and a decrease in luciferase activity (WT: 50 %; A53T: 34.8 %). Overexpression of A53T-α-SN brought about with more cell death percentage compared to WT-α-SN within 36 h. No significant alteration in cytochrome c and reactive oxygen species release into cytosol were observed for both WT-α-SN and A53T-α-SN.

CONCLUSION

Altogether, these findings highlight the link between disease related mutants of α-SN (like A53T-α-SN) in triggering of RIPK1-dependent extrinsic apoptotic pathway in cell death during neurodegeneration.

Bio-photoelectrochemical degradation, and photocatalysis process by the fabrication of copper oxide/zinc cadmium sulfide heterojunction nanocomposites: Mechanism, microbial community and antifungal analysis

In this work, the fabrication of the CuO on ZnCdS as a heterojunction nanocomposites were conducted by hydrothermal method and the synthesis method was confirmed by the XRD, XPS, EDS, UV-vis spectrum analysis. The CuO/ZnCdS was used as a photocathode in the bio-photoelectrochemical system (BPES) for tetracycline (TC) degradation under solar irradiation. The CuO/ZnCdS photocathode indicated substantial photocatalytic efficiency for TC degradation, due to the fast separation and transfer of photogenerated carriers. The ESR test evaluates the mechanism of degradation, and shows that ·OH, and ·O₂^- were contributed to TC degradation. The TC degradation was 1.59 times higher than the unilluminated process (98.72% vs 61.71). The photocatalysis test shows that the TC was degraded about 90.5% in 1.5 h. Then, the synthesized CuO/ZnCdS nanocomposites were studied for the biological application such as antifungal activities. CuO/ZnCdS nanocomposites depicted substantial antimicrobial activity versus Candida-albicans by in vitro process. Therefore, this study suggests the novel system for the antibiotics degradation, and as antifungal application.

Strong anti-viral nano biocide based on Ag/ZnO modified by amodiaquine as an antibacterial and antiviral composite

In this paper, we synthesized Ag/ZnO composite colloidal nanoparticles and the surface of nanoparticles was improved by amodiaquine ligand. The synthesized nanoparticles were characterized using the XRD diffraction pattern, FT-IR Spectroscopy, TEM image, and UV-Vis spectroscopy. The antibacterial, antifungal, and antiviral effects of the synthesized colloid were examined on E.coli, Staphylococcus aureus, Pseudomonas aeruginosa, and Enterococcus hirae bacteria, and Candida Albicans and form spore aspergillus fungi, also influenza, herpes simplex, and covid 19 viruses. The results indicate more than 7 log removal of the bacteria, fungi, and viruses by synthesized colloid with a concentration of 15 μg/L (Ag)/50 µg/ml (ZnO). This removal for covid 19 virus is from 3.2 × 10⁸ numbers to 21 viruses within 30 s. Also, irritation and toxicity tests of the synthesized colloid show harmless effects on human cells and tissues. These colloidal nanoparticles were used as mouthwash solution and their clinical tests were done on 500 people infected by the coronavirus. The results indicate that by washing their mouth and nose three times on day all patients got healthy at different times depending on the depth of the disease. Almost all people with no signs of infection and using this solution as a mouthwash didn't infect by the virus during the study.

High efficiency of Ag0 decorated Cu2MoO4 nanoparticles for heterogeneous photocatalytic activation, bactericidal system, and detection of glucose from blood sample

The novel Ag0/Cu2MoO4 nanoparticles was simply synthesized via chemical method. Ag/Cu2MoO4 nanoparticles was characterized by FESEM image, XRD curve, UV-vis spectroscopy, BET analysis, and XPS spectrum. XRD pattern depicts that the cubic crystalline phase of particles. The band gap of Ag/Cu2MoO4 nanoparticles was achieved to 2.04 eV, which that depicted the best activity under visible light irradiation. Ag/Cu2MoO4 nanoparticles exhibits 99.74% degradation under light and persulfate ion which was higher response than Cu2MoO4 nanoparticles (83.56%) under this condition. The scavenging test indicates the important reactive species in removal process were •OH, and •SO4-. The Ag/Cu2MoO4 nanoparticles was indicated highly photo-stability for the MG degradation after 5th cycle. Ag/Cu2MoO4 exhibits substantial antibacterial properties against P. aeruginosa and S. pneumoniae. Moreover, Ag/Cu2MoO4 nanoparticles was experimented to peroxidase-like performance for the colorimetric detection of glucose with the Limit of Detection about 52.23 nM.

Recent Advances in the Removal of Organic Dyes from Aqueous Media with Conducting Polymers, Polyaniline and Polypyrrole, and Their Composites

Water pollution by organic dyes, and its remediation, is an important environmental issue associated with ever-increasing scientific interest. Conducting polymers have recently come to the forefront as advanced agents for removing dye. The present review reports on the progress represented by the literature published in 2020–2022 on the application of conducting polymers and their composites in the removal of dyes from aqueous media. Two composites, incorporating the most important polymers, polyaniline, and polypyrrole, have been used as efficient dye adsorbents or photocatalysts of dye decomposition. The recent application trends are outlined, and future uses also exploiting the electrical and electrochemical properties of conducting polymers are offered.

Synergistic activities of silver indium sulfide/nickel molybdenum sulfide nanostructures anchored on clay mineral for light-driven bactericidal performance, and detection of uric acid from gout patient serum

In this study, the hydrothermal method was used to synthesis of silver indium sulfide/nickel molybdenum sulfide (AgInS₂/NiMoS₄) nanostructure and decorated on Palygorskite (Plg) as an excellent carrier of antibacterial materials. The performance of the prepared AgInS₂/NiMoS₄/Plg composites was investigated for light-driven antibacterial process and detection of uric acid from biological samples. The result shows the highest antibacterial activity of the AgInS₂/NiMoS₄/Plg with the minimum inhibitory concentrations about 0.2-0.3 mg/mL. The prepared AgInS₂/NiMoS₄/Plg as sensor depicted enhanced peroxidase-like activity for detection of acid uric. The detection limit of acid uric by AgInS₂/NiMoS₄/Plg was about 26.1 nM. Therefore, the AgInS₂/NiMoS₄/Plg can be developed in the bactericidal process and sensing in complex biological systems.