Aggregation and photoresponsive behavior of azobenzene–oligomethylene–glucopyranoside bolaamphiphiles

Strategies for Incorporating Graphene Oxides and Quantum Dots into Photoresponsive Azobenzenes for Photonics and Thermal Applications

Graphene represents a new generation of materials which exhibit unique physicochemical properties such as high electron mobility, tunable optics, a large surface to volume ratio, and robust mechanical strength. These properties make graphene an ideal candidate for various optoelectronic, photonics, and sensing applications. In recent years, numerous efforts have been focused on azobenzene polymers (AZO-polymers) as photochromic molecular switches and thermal sensors because of their light-induced conformations and surface-relief structures. However, these polymers often exhibit drawbacks such as low photon storage lifetime and energy density. Additionally, AZO-polymers tend to aggregate even at moderate doping levels, which is detrimental to their optical response. These issues can be alleviated by incorporating graphene derivatives (GDs) into AZO-polymers to form orderly arranged molecules. GDs such as graphene oxide (GO), reduced graphene oxide (RGO), and graphene quantum dots (GQDs) can modulate the optical response, energy density, and photon storage capacity of these composites. Moreover, they have the potential to prevent aggregation and increase the mechanical strength of the azobenzene complexes. This review article summarizes and assesses literature on various strategies that may be used to incorporate GDs into azobenzene complexes. The review begins with a detailed analysis of structures and properties of GDs and azobenzene complexes. Then, important aspects of GD-azobenzene composites are discussed, including: (1) synthesis methods for GD-azobenzene composites, (2) structure and physicochemical properties of GD-azobenzene composites, (3) characterization techniques employed to analyze GD-azobenzene composites, and most importantly, (4) applications of these composites in various photonics and thermal devices. Finally, a conclusion and future scope are given to discuss remaining challenges facing GD-azobenzene composites in functional science engineering.

A Natural Glycyrrhizic Acid-Tailored Light-Responsive Gelator

The construction of stimuli-responsive materials by using naturally occurring molecules as building blocks has received increasing attention owing to their bioavailability, biocompatibility, and biodegradability. Herein, a symmetrical azobenzene-functionalized natural glycyrrhizic acid (trans-GAG) was synthesized and could form stable supramolecular gels in DMSO/H₂ O and MeOH/H₂ O. Owing to trans-cis isomerization, this gel exhibited typical light-responsive behavior that led to a reversible gel-sol transition accompanied by a variation in morphology and rheology. Additionally, this trans-GAG gel displayed a distinct injectable self-healing property and outstanding biocompatibility. This work provides a simple yet rational strategy to fabricate stimuli-responsive materials from naturally occurring, eco-friendly molecules.

Photoresponsive amphiphilic azobenzene–PEG self-assembles to form supramolecular nanostructures for drug delivery applications

Self-assembled smart nanostructures have emerged as controlled and site-specific systems for drug delivery applications.

Chiral self-assembly of designed amphiphiles: influences on aggregate morphology

A series of novel amphiphiles were designed for self-assembly into chiral morphologies, the amphiphiles consisting of a glutamic acid (Glu) headgroup connected through an 11-carbon alkoxy chain to a diphenyldiazenyl (Azo) group and terminated with a variable length alkyl chain (R-Azo-11-Glu, where R denotes the number of carbons in the distal chain). TEM imaging of amphiphile aggregates self-assembled from heated, methanolic, aqueous solution showed that chiral order, expressed as twisted ribbons, helical ribbons, and helically based nanotubes, increased progressively up to a distal chain length containing eight carbons, and then decreased with further increases in distal chain length. TEM and CD showed that the chiral aggregations of single enantiomers were influenced by the molecular chirality of the headgroup. However, the assembly of D,L-10-Azo-11-Glu into nanotubes demonstrated that chiral symmetry breaking effected by the azo group was also relevant to the chiral organization of the amphiphiles. The chiral order of aggregate morphologies was additionally affected by the temperature and solvent composition of assembly in a manner correlated to the mechanism driving assembly; i.e., D,L-10-Azo-11-Glu was sensitive to the temperature of assembly but less so to solvent composition, while L-14-Azo-11-Glu was sensitive to solvent composition and not to temperature. FTIR and UV-vis spectroscopic investigations into the organization of the head and azo groups, in chiral and achiral structures, illustrated that a balance of the influences of the hydrophilic and hydrophobic components on self-assembly was required for the optimization of the chiral organization of the self-assembled structures.

Chiral self-assembly of designed amphiphiles: optimization for nanotube formation

Four amphiphiles with L-aspartic acid headgroups (Asp) and a diphenyldiazenyl group (Azo) contained within the hydrophobic tails were designed and synthesized for self-assembly into helically based nanotubes. The amphiphiles of the form R'-{4-[(4-alkylphenyl)diazenyl]phenoxy}alkanoyl-L-aspartic acid (where R' is 10 or 11) varied only in alkyl chain lengths either side of the azo group, having 4, 7, or 10 carbon distal chains and 10 or 11 carbon proximal chains (R-Azo-R'-Asp, where R denotes the number of carbons in the distal chain and R' denotes the number of carbons in the proximal chain). Despite the molecular similarities, distinct differences were identified in the chiral order of the structures self-assembled from hot methanolic aqueous solutions using microscopy and spectroscopic analyses. This was reflected in dominant thermodynamic aggregate morphologies that ranged from amorphous material for 10-Azo-10-Asp, through twisted ribbons (196 ± 49 nm pitch) for 7-Azo-11-Asp, to the desired helically based nanotubes for 4- and 7-Azo-10-Asp (81 ± 11 and 76 ± 6 nm diameters, respectively). Another key variable in the self-assembly of the amphiphiles was the use of a second method to precipitate aggregates from solution at room temperature. This method enabled the isolation of thermodynamically unstable and key transitional structures. Helical ribbons were precursor structures to the nanotubes formed from 4- and 7-Azo-10-Asp as well as the wide, flattened nanotube structures (587 ± 85 nm width) found for 4-Azo-10-Asp. Overall, the results highlighted the interplay of influence of the headgroup and the hydrophobic tail on self-assembly, providing a basis for future rational design of self-assembling amphiphiles.

Helical assembly of azobenzene-conjugated carbohydrate hydrogelators with specific affinity for lectins

Carbohydrate-mediated interactions are involved in various biological processes via specific molecular assembly and recognition. Such interactions are enhanced by multivalent effects of the sugar moieties, and thus supramolecular sugar-assembly, i.e., spontaneous association of glycoamphiphiles, is a promising approach to tailor glycocluster formation. In this study, novel sugar-decorated nanofibers were successfully prepared by self-assembly of low molecular weight hydrogelators composed of azobenzene and disaccharide lactones. Circular dichroism measurement of the as-prepared hydrogels indicated that the azobenzene amphiphile containing a lactose moiety possessed (R)-chirality, while the maltose-azobenzene conjugate exhibited (S)-chirality, even though the cellobiose-conjugated azobenzene existed in an achiral form. This suggests that the chiral orientation of the chromophoric azobenzene depended on both the glycosidic linkages and the steric arrangement of hydroxyl groups in the conjugated carbohydrates. Lectin-binding and cell adhesion assays revealed that the nonreducing ends of the conjugated sugar moieties were exposed on the surfaces of self-assembled nanofibrous hydrogels, allowing them to be effectively recognized by the corresponding lectins. In addition, photoisomerization of azobenzene under ultraviolet irradiation induced the sol-gel transitions of the hydrogels. These results demonstrate that the reversibly transformed fibrous glycohydrogels show potential for application as carbohydrate-decorated scaffolds for cell culture engineering.

Butadiene-based photoresponsive soft materials

The creation of stimuli-responsive materials offers considerable challenges in the area of material science. The use of light as an external stimulus has particular advantages because it can bring about rapid transformations in remote regions in a very precise manner. Naturally occurring photoresponsive systems provide the motivation for developing corresponding artificial systems using molecular self-assembly to address issues such as quantum efficiency, selectivity, and amplification. A practical strategy for developing photoresponsive materials is to utilize molecules that can undergo considerable change in shape on photoisomerization. Although the photoisomerization of polyenes between their linear all-trans isomer and bent cis isomers has been extensively investigated in solution and in organized media because of its relevance to naturally occurring photoresponsive systems, its use in developing artificial photoresponsive systems has not been well explored. This feature article provides an overview of photoresponsive soft materials such as liquid crystals and gels with special emphasis on our recent studies related to the use of the butadiene chromophore for the design of such materials. The role of molecular self-assembly in controlling the photochemical and photophysical properties of these molecules is also discussed.

pH-Dependent cis --> trans isomerization rates for azobenzene dyes in aqueous solution

Azobenzenes can function as molecular switches driven by their unusual cis <--> trans photoisomerization properties. The stability of an azobenzene-based switch depends on its rate of thermal relaxation, which is known to depend on the solvent environment, but few kinetic studies in aqueous media have been reported. We use nanosecond UV laser flash photolysis-transient absorption spectroscopy to measure thermal cis --> trans isomerization rates for mono- and disubstituted p-aminoazobenzenes and p-hydroxyazobenzenes in water at 23 degrees C over the pH range of 4 to 11. Observed absorption transients are fit to first-order relaxation rate constants between 10(5) and 10(1) s(-1), which is generally much faster than in nonpolar solvents, and the relaxation rates vary systematically and predictably with pH as the equilibrium shifts to ionized forms of the dyes that isomerize much more rapidly. Acid ionization constants for these dyes determined from our kinetic mechanism are compared with the pH dependence of their equilibrium UV-vis spectra. New kinetics results may enable pH control of azobenzene-based molecular switching times.

Tuning microstructures in organogels: gelation and spectroscopic properties of mono- and bis-cholesterol-linked diphenylbutadiene derivatives

The gelation and photophysical properties of mono- and bis-cholesterol derivatives linked to diphenylbutadiene have been investigated. Scanning electron microscopy of xerogels of the monocholesterol derivatives indicated that these molecules self-assemble into 3D networks consisting of helically twisted fibers. In contrast, the morphology of xerogels of the bis-cholesterol derivatives indicated agglomerated spheres. In concentrated solutions (> 10(-4) M), the self-assembled superstructure of the monocholesterol derivatives consists of helically twisted fibers whereas that of the bis-cholesterol derivatives indicated clustered spheres. An investigation of spectroscopic properties suggests that the morphology of the superstructures formed in these systems may be correlated to the nature of the molecular aggregates formed. Absorption and emission spectral studies as a function of concentration and temperature suggested the formation of predominantly J-type aggregates in the monocholesterol and H-type aggregates in the bis-cholesterol derivatives. It is proposed that the slipped stack arrangement within the J aggregates of the monocholesterol derivatives resulted in the formation of helically twisted fibers, whereas the cofacial arrangement in the H aggregates of the bis-cholesterol derivatives could prevent such fiber formation, resulting in the formation of the agglomerated spheres.