Photocatalytic activity enhancement of TiO2 thin films with silver doping under visible light

PVA-Based Nanofibers Containing Chitosan Modified with Graphene Oxide and Carbon Quantum Dot-Doped TiO2 Enhance Wound Healing in a Rat Model

Electrospun nanofibrous constructs based on nanoparticles and biopolymers have recently been used in tissue engineering because of their similarity to the extracellular matrix in nature. In this study, electrospun chitosan-carbon quantum dot-titanium dioxide-graphene oxide (CS-CQD-TiO₂-GO) nanofibrous mats were synthesized for use as wound dressings by the electrospinning method. To increase the biodegradation rate and water resistance, the fabricated nanofibrous mats were cross-linked. SEM images showed a uniform and coherent structure of CS-CQD-TiO₂-GO nanocomposites and CS-CQD-TiO₂-GO electrospun nanofibers mats. FTIR analysis, XRD pattern, SEM mapping, and EDS spectrum demonstrate the accuracy of the synthesis as well as the elemental and chemical structure of the nanofibrous mat. The water contact angle indicated that the nanofibrous mat had a hydrophilic property, which is essential for controlling wound exudates. The tensile strength and elongation tests showed that the nanofibrous mat has suitable mechanical properties for wound dressing, including significant flexibility and strength. Interestingly, antimicrobial testing illustrated that the fabricated nanofibrous mat had antibacterial activity against Gram-negative and Gram-positive bacteria. Appropriate cell viability and cytocompatibility of treated mouse fibroblast NIH3T3 cells with the nanofibrous mat were determined using an MTT assay. The animal study results confirmed the proper potential of the nanofibrous mat in wound dressing applications.

Cefotaxime removal enhancement via bio-nanophotocatalyst α-Fe2O3 using photocatalytic degradation technique and its echo-biomedical applications

The present paper evaluates the photocatalytic degradation (PCD) performance of the biofabricated hematite nanoparticles (α-HNPs) for the degradation approach of the Cefotaxime (Cfm). The optimum pH of the solution to achieve the best PCD was found to be 10.5. The kinetics study for the PCD of the Cfm via α-HNPs has been investigated and the reaction was found to be fellow pseudo-first-order at R2 = 0.992. The mass loading impact of α-HNPs was investigated and estimated for the maximum degradation of Cfm 0.4 mg/mL. UV-Vis confirmed that α-HNPs had a direct transition bandgap at 3.78 eV at a maximum absorption wavelength of 362 nm with suspension stability for 7 days. The probable mechanism of the Cfm PCD via α-HNPs and the degradation pathway was conducted. The validation of the suspension stability of the α-HNPs (-68.6 ± 11.8 mV) was determined using the zeta potential investigation test. XRD investigation was conducted after Cfm PCD showing an average crystallite size of 27.0 nm. XRD, TEM, SEM, EDX, and FT-IR analyses have been conducted for the α-HNPs before and after Cfm PCD confirming the high efficiency for the reusability of the current biocatalyst α-HNPs for further use. TEM results of the particle sizes of α-HNPs were found at 19.2 ± 4.4 and 20.6 ± 7.4 nm respectively before and after Cfm PCD. The efficiency of the Cfm PCD was found to be 99.1% after 6 h. High potent as an antibacterial agent of α-HNPs was investigated either α-HNPs alone or after its PCD activity against Cfm. The antibacterial activity revealed high sensitivity, especially toward Gram-positive species indicating its promising ability against pathogenic issues. Interestingly, Cfm@α-HNPs showed superior anti-proliferative activity as tested by MTT assay and were able to induce apoptosis in MCF7 and HepG2 cell lines using the flow cytometry technique at 20.7% and 17% respectively. Also, The IC50 of hydrogen peroxide scavenging was estimated and it was manifested that 635.8 and 665.6 μg/mL of α-HNPs before and after the PCD process of Cfm respectively.

Bacterial cellulose as a potential biopolymer in biomedical applications: a state-of-the-art review

Throughout history, natural biomaterials have benefited society. Nevertheless, in recent years, tailoring natural materials for diverse biomedical applications accompanied with sustainability has become the focus. With the progress in the field of materials science, novel approaches for the production, processing, and functionalization of biomaterials to obtain specific architectures have become achievable. This review highlights an immensely adaptable natural biomaterial, bacterial cellulose (BC). BC is an emerging sustainable biopolymer with immense potential in the biomedical field due to its unique physical properties such as flexibility, high porosity, good water holding capacity, and small size; chemical properties such as high crystallinity, foldability, high purity, high polymerization degree, and easy modification; and biological characteristics such as biodegradability, biocompatibility, excellent biological affinity, and non-biotoxicity. The structure of BC consists of glucose monomer units polymerized via cellulose synthase in β-1-4 glucan chains, creating BC nano fibrillar bundles with a uniaxial orientation. BC-based composites have been extensively investigated for diverse biomedical applications due to their similarity to the extracellular matrix structure. The recent progress in nanotechnology allows the further modification of BC, producing novel BC-based biomaterials for various applications. In this review, we strengthen the existing knowledge on the production of BC and BC composites and their unique properties, and highlight the most recent advances, focusing mainly on the delivery of active pharmaceutical compounds, tissue engineering, and wound healing. Further, we endeavor to present the challenges and prospects for BC-associated composites for their application in the biomedical field.

Antibacterial properties of a bacterial cellulose CQD-TiO2 nanocomposite

Antibacterial dressing can prevent the occurrence of many infections of wounds. Bacterial cellulose (BC) has the ability to carry and transfer the medicine to achieve a wound healing bandage. In this study, Carbon Quantum Dots-Titanium dioxide (CQD-TiO₂) nanoparticles (NP) were added to BC as antibacterial agents. FTIR Spectroscopy illuminated that NPs were well-bonded to BC. Interestingly, MIC test proved that BC/CQD-TiO₂ nanostructure (NS) has anti-bacterial properties against Staphylococcus aureus. The findings indicated that, CQD-TiO₂ NPs have stronger antibacterial properties with better tensile strength compared to CQD NPs, in a concentration-dependent manner. Toxicity of CQD-TiO₂ NPs on human L929 fibroblast cells was also evaluated. Most importantly, the results of the scratch test indicated that the NS was effective in wound healing in L929 cells. The approach in this study may provide an alternative to make an antibacterial wound dressing to achieve an effective drug-based bandage.

Recent Advances in TiO2 Films Prepared by Sol-gel Methods for Photocatalytic Degradation of Organic Pollutants and Antibacterial Activities

Photocatalysis has recently emerged as an advanced, green, and eco-friendly process for the treatment of wastewater and air, and antimicrobial disinfection applications. In this context, TiO2 nanostructures have been shown to be the prominent photocatalyst candidates due to their low cost, non-toxicity, and ease of fabrication. This review highlights the investigation and development of TiO2 photocatalyst film by sol-gel method with special emphasis on the photodecolorization of synthetic dyes and antibacterial activities. Furthermore, various synthesis methods for the preparation of TiO2 films and their advantages, as well as limitations, are summarized. Finally, recent advances in TiO2 films by sol-gel method for dye degradation and antibacterial activities, challenges, and future perspective are discussed.

Synthesis of Ag/TiO2 nanocomposite via plasma liquid interactions: Improved performance as photoanode in dye-sensitized solar cell

Ag/TiO₂ nanocomposite was prepared by the atmospheric direct current plasma in aqueous solution to improve its performance in dye-sensitized solar cells (DSSCs) as the photoanode. The fabricated DSSC shows high power conversion efficiency over 6.5% and displays better long-term stability than that of referenced pure TiO₂. The comparison of photoluminescence spectra of Ag/TiO₂ and pure TiO₂ showed that only the Ag containing samples had notable photocurrent under visible light, which was attributed to the highly dispersed Ag, according to the EDS and XRD measurements. The short-circuit current density (Jsc) and open-circuit voltage (Voc) reached 13.43 mA cm^-2 and 0.72 V in Ag/TiO₂, and 9.44 mA cm^-2 and 0.68 V in pure TiO₂, respectively. The performance improvement in Ag/TiO₂ DSSC may occur due to the declined band-gap energy, retarded charge recombination and greater surface coverage of the sensitizing dye over Ag/TiO₂ nanocomposite.

Photoelectrocatalytic inactivation of fecal coliform bacteria in urban wastewater using nanoparticulated films of TiO2 and TiO2/Ag

Photocatalysis has shown the ability to inactivate a wide range of harmful microorganisms with traditional use of chlorination. Photocatalysis combined with applied bias potential (photoelectrocatalysis) increases the efficiency of photocatalysis and decreases the charge recombination. This work examines the inactivation of fecal coliform bacteria present in real urban wastewater by photoelectrocatalysis using nanoparticulated films of TiO₂ and TiO₂/Ag (4%w/w) under UV light irradiation. The catalysts were prepared with different thicknesses by the sol-gel method and calcined at 400°C and 600°C. The urban wastewater samples were collected from the sedimentation tank effluent of the university sewage treatment facility. The rate of bacteria inactivation increases with increasing the applied potential and film thicknesses; also, the presence of silver on the catalyst surface annealed at 400°C shows better inactivation than that at 600°C. Finally, a structural cell damage of Escherichia coli (DH5α), inoculated in water, is observed during the photoelectrocatalytic process.

A silver nanoparticle loaded TiO2 nanoporous layer for visible light induced antimicrobial applications

A nanoporous TiO2 layer was formed on commercially pure titanium by a simple anodization method in aqueous hydrofluoric acid (HF) medium. Silver nanoparticles (AgNP) were loaded into the nanoporous TiO2 layer by UV light irradiation. The morphology, chemical composition and photocatalytic activity of the modified titanium surfaces were characterized by scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy and UV-vis absorption spectroscopy techniques. The redox behavior of the AgNP loaded TiO2 layer was analyzed by cyclic voltammetry (CV) studies. The impedance behavior of the nanoporous TiO2 layer with and without AgNP was investigated by electrochemical impedance spectroscopy (EIS). The antibacterial effect of the AgNP loaded TiO2 layer was evaluated using Pseudomonas sp. and Bacillus sp. cultures. The efficacy of this modified layer to act as an antibacterial agent to minimize biofouling of titanium is demonstrated in this investigation.

Characterization and photocatalytic performance evaluation of various metal ion-doped microstructured TiO2 under UV and visible light

Commercially available microcrystalline TiO2 was doped with silver, ferrous and ferric ion (1.0 mol %) using silver nitrate, ferrous sulfate and ferric nitrate solutions following the liquid impregnation technology. The catalysts prepared were characterised by FESEM, XRD, FTIR, DRS, particle size and micropore analysis. The photocatalytic activity of the prepared catalysts was tested on the degradation of two model dyes, methylene blue (3,7-bis (Dimethylamino)-phenothiazin-5-ium chloride, a cationic thiazine dye) and methyl blue (disodium;4-[4-[[4-(4-sulfonatoanilino)phenyl]-[4-(4-sulfonatophenyl)azaniumylidenecyclohexa-2,5-dien-1-ylidene]methyl]anilino]benzene sulfonate, an anionic triphenyl methane dye) under irradiation by UV and visible light in a batch reactor. The efficiency of the photocatalysts under UV and visible light was compared to ascertain the light range for effective utilization. The catalysts were found to have the anatase crystalline structure and their particle size is in a range of 140-250 nm. In the case of Fe(2+) doped TiO2 and Fe(3+) doped TiO2, there was a greater shift in the optical absorption towards the visible range. Under UV light, Ag(+) doped TiO2 was the most efficient catalyst and the corresponding decolorization was more than 99% for both the dyes. Under visible light, Fe(3+) doped TiO2 was the most efficient photocatalyst with more than 96% and 90% decolorization for methylene blue and methyl blue, respectively. The kinetics of the reaction under both UV and visible light was investigated using the Langmuir-Hinshelwood pseudo-first-order kinetic model. Kinetic measurements confirmed that, Ag(+) doped TiO2 was most efficient in the UV range, while Fe(3+) doped TiO2 was most efficient in the visible range.