Photocatalytic degradation of recalcitrant micropollutants by reusable Fe 3 O 4 /SiO 2 /TiO 2 particles

Fabrication of new composite NCuTiO2/CQD for photocatalytic degradation of ciprofloxacin and pharmaceutical wastewater treatment: degradation pathway, toxicity assessment

In this research, the photocatalytic degradation of CIP from aqueous solutions using CQD decorated on N-Cu co-doped titania (NCuTCQD) was made during two synthesis steps by sol-gel and hydrothermal methods. The fabricated catalysts were analyzed using various techniques, including XRD, FT-IR, BET, FESEM, EDX, and DRS. The results showed that N and Cu atoms were doped on TiO2 and CQD was well deposited on NCuT. The investigation of effective operational parameters demonstrated that the complete removal of ciprofloxacin (CIP: 20 mg/L) could be achieved at pH 7.0, NCuTCQD4wt%: 0.8 g/L, and light intensity: 100 mW/cm2 over 60 min reaction time. The O2•- and OH˙ radicals were identified as the primary reactive species during the decontamination process. The synthesized photocatalyst could be recycled after six consecutive cycles of CIP decomposition with an insignificant decrease in performance. Pharmaceutical wastewater was treated through the optimum degradation conditions which showed the photocatalytic degradation eliminated 89% of COD and 75% of TOC within 180 min. In the effluent toxicity evaluation, the EC50 values for treated and untreated pharmaceutical wastewater increased from 62.50% to 140%, indicating that the NCuTCQD4wt%/Vis system can effectively reduce the toxic effects of pharmaceutical wastewater on aquatic environments.

A New Cd(II)-Based Coordination Polymer for Efficient Photocatalytic Removal of Organic Dyes

Coordination polymers (CPs) are a diverse class of multi-dimensional compounds that show promise as photocatalysts for degrading dyes in polluted water. Herein, a new 1D Cd(II)-based coordination polymer with the formula [Cd(bpyp)(nba)2] (1) (bpyp = 2,5-bis(pyrid-4-yl)pyridine and Hnba = 4-nitrobenzoic acid) is synthesized and characterized. In 1, the two carboxyl groups of two different nba- ligands show μ2-η1:η1 and μ1-η1:η1 coordination modes to connect the CdII centers and sit on either side of the chain along the b direction. The produced CP 1 was utilized as the photocatalyst in the process of the photodegradation of methyl blue (MB), methyl orange (MO), rhodamine B (RhB), and methyl violet (MV) dyes when exposed to UV light. The photocatalytic degradation activities of CP 1 were analyzed, and the results suggest that it exhibits an extraordinary efficiency in the degradation of MB, MV, MO, and RhB. RhB has a 95.52% efficiency of degradation, whereas MV has a 58.92% efficiency, MO has 35.44%, and MB has 29.24%. The photodecomposition of dyes is catalyzed mostly by •O2- and •OH-, as shown by research involving the trapping of radicals.

Application of a novel composite of Fe3O4@SiO2/PAEDTC surrounded by MIL-101(Fe) for photocatalytic degradation of penicillin G under visible light

The novel photocatalyst of Fe3O4@SiO2/PAEDTC@MIL-101(Fe) was prepared based on the sol-gel method, and its structure and morphology were determined by SEM mapping, TEM, XRD, FTIR, and N2 adsorption-desorption analyses. The photocatalytic activity of nanocomposite was evaluated in comparison with other particles as well as adsorption and photolysis processes. The effect of operating parameters showed that the complete degradation of penicillin G (PNG) can be provided at a photocatalyst dosage of 0.6 g/L, radiation intensity of 36 W, pH of 5, and time of 60 min. In the optimum condition, 84% TOC removal was attained and the BOD5/COD rate for the treated effluent was above 0.4, which was representative of the high biodegradability of the treated effluent compared to the raw sample. The findings of energy consumption showed that PNG can be easily and effectively treated by the photocatalytic process based on magnetic MIL-101(Fe) with electrical energy per order between 10 and 20.87 kWh/m3. Due to the excellent interaction between the MIL-101(Fe) and Fe3O4@SiO2/PAEDTC, the photocatalyst stability test showed a recyclability of the particles for 5 consecutive reaction cycles with a minimum reduction of 7%. Solution treated with photocatalyst under UV and visible light sources explained that the toxicity of the effluent after treatment is significantly reduced with the growth of Escherichia coli. Scavenging experiments showed that •OH radical and hole (h+) are the main agents in degrading PNG to CO2, H2O, and biodegradable and low-toxicity products. Finally, the findings of the diagnostic analysis and comparative experiments proved that with the interaction of Fe3O4@SiO2, NH2, and MIL-101(Fe), a lower band gap can be prepared for more absorption of photons and pollutant and also more and faster production of active radicals.

Photocatalytic degradation of methylene blue at nanostructured ZnO thin films

The photocatalytic degradation of the wastewater dye pollutant methylene blue (MB) at ZnO nanostructured porous thin films, deposited by direct current reactive magnetron sputtering on Si substrates, was studied. It was observed that over 4 photocatalytic cycles (0.3 mg · l^-1MB solution, 540 minUV irradiation), the rate constantkof MB degradation decreased by ∼50%, varying in the range (1.54 ÷ 0.78) · 10^-9(mol·l^-1·min^-1). For a deeper analysis of the photodegradation mechanism, detailed information on the nanostructured ZnO surface morphology and local surface and subsurface chemistry (nonstoichiometry) were obtained by using scanning electron microscopy (SEM) and x-ray photoelectron spectroscopy (XPS) as complementary analytical methods. The SEM studies revealed that at the surface of the nanostructured ZnO thin films a coral reef structure containing polycrystalline coral dendrites is present, and that, after the photocatalytic experiments, the sizes of individual crystallites increased, varying in the range 43 ÷ 76 nm for the longer axis, and in the range 28 ÷ 58 nm for the shorter axis. In turn, the XPS studies showed a slight non-stoichiometry, mainly defined by the relative [O]/[Zn] concentration of ca. 1.4, whereas [C]/[Zn] was ca. 1.2, both before and after the photocatalytic experiments. This phenomenon was directly related to the presence of superficial ZnO lattice oxygen atoms that can participate in the oxidation of the adsorbed MB molecules, as well as to the presence of surface hydroxyl groups acting as hole-acceptors to produce OH· radicals, which can be responsible for the generation of superoxide ions. In addition, after experiments, the XPS measurements revealed the presence of carboxyl and carbonyl functional groups, ascribable to the oxidation by-products formed during the photodegradation of MB.

Synthesis of NiFe2O4/SiO2/NiO Magnetic and Application for the Photocatalytic Degradation of Methyl Orange Dye under UV Irradiation

NiFe2O4/SiO2/NiO magnetic was successfully synthesized using NiFe2O4, SiO2, and NiO as the core, interlayer, and shell, respectively. NiFe2O4/SiO2/NiO under UV light irradiation was used for photocatalytic degradation of methyl orange dye with different pH, catalyst dose, and initial dye concentration. This composite was characterized by X-ray Diffraction (XRD), Fourier Transform Infra-Red (FTIR), Scanning Electron Microscopy-Electron Dispersive X-ray Spectroscopy (SEM-EDs), Vibrating Sample Magnetometer (VSM), UV-Vis Diffuse Reflectance Spectroscopy (UV-Vis DRS), and Point of Zero Charge (pHpzc). The results showed that the composite is a superparamagnetic material with a saturation magnetization value of 44.13 emu/g. It also has a band gap of 2.67 eV with a pHpzc of 6.33. The optimum conditions for photocatalytic degradation were at pH of 4; 0.50 g/L catalyst dose, and 10 mg/L initial concentration. NiFe2O4/SiO2/NiO degradation efficiency to methyl orange dye was 95.76%. The photocatalytic degradation in different concentrations follows the pseudo-first-order, where the greater the concentration, the smaller the constant rate (k). After five cycles of repeated usage, NiFe2O4/SiO2/NiO has good catalytic performance as well as efficient and favourable of a recyclable photocatalyst. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Synthesis, characterization and photocatalytic properties of nanostructured lanthanide doped β-NaYF4/TiO2 composite films

The photocatalytic approach is known to be one of the most promising advanced oxidation processes for the tertiary treatment of polluted water. In this paper, β-NaYF₄/TiO₂ composite films have been synthetized through a novel sol–gel/spin-coating approach using a mixture of β-diketonate complexes of Na and Y, and Yb³⁺, Tm³⁺, Gd³⁺, Eu³⁺ as doping ions, together with the TiO₂ P25 nanoparticles. The herein pioneering approach represents an easy, straightforward and industrially appealing method for the fabrication of doped β-NaYF₄/TiO₂ composites. The effect of the doped β-NaYF₄ phase on the photocatalytic activity of TiO₂ for the degradation of methylene blue (MB) has been deeply investigated. In particular, the upconverting TiO₂/β-NaYF₄: 20%Yb, 2% Gd, x% Tm (x = 0.5 and 1%) and the downshifting TiO₂/β-NaYF₄: 10% Eu composite films have been tested on MB degradation both under UV and visible light irradiation. An improvement up to 42.4% in the degradation of MB has been observed for the TiO₂/β-NaYF₄: 10% Eu system after 240 min of UV irradiation.

Enhanced disinfection of E. faecalis and levofloxacin antibiotic degradation using tridoped B-Ce-Ag TiO2 photocatalysts synthesized by ecofriendly citrate EDTA complexing method

Since its use for photochemical water splitting reported first in 1972, TiO₂ is one of the most extensively studied photocatalysts for a diverse range of applications. Monodoping or codoping of the catalyst is a proven strategy to enhance the functionality of TiO₂ under solar or visible light. However, the use of three or more dopants in the development of more efficient and visible light active photocatalysts has not been investigated widely, especially for microbial disinfection. Boron/cerium/silver tridoped TiO₂ photocatalysts with curated amounts of the dopants (B = 1, 2 at.%, Ce = 0.1 at.%, Ag = 0.06 at.%), synthesized by the ecofriendly EDTA-citrate method, were evaluated for the disinfection of water using Enterococcus faecalis under UV-A irradiation and degradation of levofloxacin antibiotic under solar light. The catalyst characterization revealed that the spherical nanoparticles had a crystallite size of ~ 13 nm and bandgap energy values of 2.8-2.9 eV. 2B-0.1Ce-0.06Ag-TiO₂ is the best catalyst for microbial disinfection with a log reduction and kinetic rate constant ~ 30 and ~ 4.5 times higher than those values determined for the other codoped or monodoped catalysts, confirming an enhanced performance. Regarding levofloxacin degradation, the best performing catalyst is 1B-0.1Ce-0.06Ag-TiO₂ with degradation of 99% and 83% COD reduction in 100 min. The tridoped photocatalysts are very effective in the inactivation of Enterococcus faecalis, thus solving the problem of antimicrobial resistance in waters containing antibiotic residues.

Fabrication of magnetic Fe3O4@SiO2@Bi2O2CO3/rGO composite for enhancing its photocatalytic performance for organic dyes and recyclability

A novel magnetic Fe₃O₄@SiO₂@Bi₂O₂CO₃/rGO composite comprising of uniform core-shell-structured Fe₃O₄@SiO₂@Bi₂O₂CO₃ microspheres mounted on reduced graphene oxide (rGO) sheets was successfully fabricated by using a facile hydrothermal method. The adsorption-desorption isotherm of Fe₃O₄@SiO₂@Bi₂O₂CO₃/rGO belonged to type IV with an H4-type hysteresis loop. The specific surface areas and magnetization saturation value (M_s) of Fe₃O₄@SiO₂@Bi₂O₂CO₃/rGO (x = 0.15 g) were 102.12 m²/g and 25.4 emu/g, respectively. Fe₃O₄@SiO₂@Bi₂O₂CO₃/rGO (x = 0.15 g) exhibited remarkable photocatalytic degradation activity and mineralization effect for MO and decolorization performance for the mixed solution of MO, Rh B, and MB. MO degradation by Fe₃O₄@SiO₂@Bi₂O₂CO₃/rGO conformed to a first-order kinetic reaction, and the corresponding k_app value was 0.05553 min^-1. A suitable amount of rGO in Fe₃O₄@SiO₂@Bi₂O₂CO₃/rGO could decrease the energy band gap, inhibit the recombination of photo-induced electron/hole (e^-/h⁺) pair, and broaden and enhance the response of the catalyst to visible light, thereby enhancing the visible-light catalytic degradation of organic dyes. The active species produced in the photocatalysis included •O₂^-, •OH, and h⁺, with •O₂^- being the dominant active species. The as-prepared photocatalyst also showed excellent magnetic separation performance and stability. Results show that the as-prepared Fe₃O₄@SiO₂@Bi₂O₂CO₃/rGO composite is a promising photocatalyst with considerable application potential in organic dyes removal.

Application of TiO2-Based Photocatalysts to Antibiotics Degradation: Cases of Sulfamethoxazole, Trimethoprim and Ciprofloxacin

The extensive application of antibiotics in human and veterinary medicine has led to their widespread occurrence in a natural aquatic environment. Global health crisis is associated with the fast development of antimicrobial resistance, as more and more infectious diseases cannot be treated more than once. Sulfamethoxazole, trimethoprim and ciprofloxacin are the most commonly detected antibiotics in water systems worldwide. The persistent and toxic nature of these antibiotics makes their elimination by conventional treatment methods at wastewater treatment plants almost impossible. The application of advanced oxidation processes and heterogeneous photocatalysis over TiO2-based materials is a promising solution. This highly efficient technology has the potential to be sustainable, cost-efficient and energy-efficient. A comprehensive review on the application of various TiO2-based photocatalysts for the degradation of sulfamethoxazole, trimethoprim and ciprofloxacin is focused on highlighting their photocatalytic performance under various reaction conditions (different amounts of pollutant and photocatalyst, pH, light source, reaction media, presence of inorganic ions, natural organic matter, oxidants). Mineralization efficiency and ecotoxicity of final products have been also considered. Further research needs have been presented based on the literature findings. Among them, design and development of highly efficient under sunlight, stable, recyclable and cost-effective TiO2-based materials; usage of real wastewaters for photocatalytic tests; and compulsory assessment of products ecotoxicity are the most important research tasks in order to meet requirements for industrial application.

Enhanced Removal of Methyl Violet Dye from Aqueous Solution by a Novel Co3O4@SiO2@TiO2-Ag Heterogeneous Semiconductor

BACKGROUND

This research introduces the application of a novel photocatalyst including Co₃O@SiO₂@TiO₂-Ag nanocomposite with highly photocatalytic stability and core-shell structure for the removal of toxic methyl violet from aqueous solution.

OBJECTIVE

The removal of toxic dyes and organic contaminants from water is outstanding research area between scientists. Methyl violet as a toxic cationic pollutant has disruptive influence for humans. In this research, with a aim to remove to methyl violet from the wastewater we developed a new photocatalyst including Co₃O₄@SiO₂@TiO₂-Ag nanocomposite as a eco-friendly and low-cost nanostructure with high photocatalytic activity in order to reduce the risks of this pollutant from aqueous media.

METHODS

The Co₃O₄@SiO₂@TiO₂-Ag nanostructure was prepared via hydrothermal and sol-gel methods and the structure elucidation of the prepared photocatalyst was analyzed by different spectroscopy techniques including XRD, FT-IR, FE-SEM, TEM, VSM and EDX.

RESULTS

Photodegradation of methyl violet in the presence of different structures showed that Co₃O₄@SiO₂@TiO₂-Ag is superior photocatalytic activity (about 98% was decomposed after 40 min) compared to the previous shells and pure Co₃O₄ NPs. Loadings of SiO₂@TiO₂-Ag nanocomposite over the Co3O4 surface led to the reduction in the band gap energy of visible light and improvement in the photocatalytic activity of Methyl Violet dye for the aqueous phase decomposition.

CONCLUSION

The remarkable benefits of this nanocomposite are highly photocatalytic efficiency in the degradation of methyl violet (almost 100 % within 1 h), easy magnetic separation, low cost, and high chemical stability. The collected results demonstrated the rate of degradation is increased by increasing the irradiation time, while the rate of degradation is decreased by dye concentration.

Fabrication of black TiO2-x /NiFe2O4 supported on diatomaceous earth with enhanced sonocatalytic activity for ibuprofen mitigation

This study reports a facile fabrication of black TiO_2-x /NiFe₂O₄ (Ti³⁺ self-doped titania coupled with nickel ferrite), an efficient sonocatalyst for ibuprofen (IBP) mitigation. Compared with TiO_2-x or NiFe₂O₄, TiO_2-x /NiFe₂O₄ heterojunction displayed higher sonocatalytic activity, and their immobilization onto diatomaceous earth further enhanced mitigation efficiency due to the synergy between adsorption and sonocatalysis. About 96.7% of 10 mg l^-1 IBP was removed in 100 min using 0.7 g l^-1 catalyst at pH = 6, with the ultrasonic power of 144 W and frequency of 60 KHz. Quenching experiment results demonstrated the roles of reactive species. The intermediates during IBP sono-oxidation were determined by HPLC-MS method, and the acute toxicity was evaluated. Furthermore, the reaction mechanism was proposed. The sonocatalyst revealed excellent reusability, suggesting itself promising for wastewater treatment.

Development of TiO2-coated YSZ/silica nanofiber membranes with excellent photocatalytic degradation ability for water purification

Numerous reports have elucidated that TiO2 nanoparticles (TiO2-NPs) exhibit respectable photocatalytic degradation capacities due to their high specific surface areas. However, the current recovery process leads to a loss of TiO2-NPs; therefore, there is a need to immobilize TiO2-NPs on the substrate used. Herein, TiO2-coated yttria-stabilized zirconia/silica nanofiber (TiO2-coated YSZ/silica NF) was prepared by coating TiO2 on the surface of YSZ/silica NF using a sol-gel process. The TiO2 coating layer on the nanofiber surface improved the separation ability of the membrane as well as the photocatalytic degradation ability. The pore size of the TiO2-coated YSZ/silica NF membrane was less than that of the pristine YSZ/silica NF membrane, and it rejected over 99.6% of the 0.5 μm polymeric particles. In addition, the TiO2-coated YSZ/silica NF membrane showed excellent adsorption/degradation of humic acid (HA, 88.2%), methylene blue (MB, 92.4%), and tetracycline (TC, 99.5%). Six recycling tests were performed to evaluate the reusability of the TiO2-coated YSZ/silica NF membrane. The adsorption/degradation efficiency for HA, MB, and TC decreased by 3.7%, 2.8%, and 2.2%, respectively. We thus verified the high separation ability, excellent photocatalytic degradation ability, and excellent reusability of the TiO2-coated YSZ/silica NF membranes.

Fabrication of black TiO2−x/CuFe2O4 decorated on diatomaceous earth with enhanced sonocatalytic activity for ibuprofen mitigation

This study reports facile fabrication of black TiO_2−x/CuFe₂O₄ (Ti³⁺ self-doped titania coupled with copper ferrite), an efficient sonocatalyst for ibuprofen (IBP) mitigation.

A sono-photocatalyst for humic acid removal from water: Operational parameters, kinetics and mechanism

As a precursor of disinfection byproducts, humic acid (HA) has adverse effects on aquatic environments and human health. Currently, many advanced oxidation processes (AOPs) have been proposed to remove HA from drinking water, one of which is photocatalysis. However, the long reaction time required for degradation and drawbacks of the photocatalysts limit the large-scale application of photocatalysis. Therefore, two principal objectives were achieved in this work. First regarding the technology, we combined photocatalysis with ultrasonic waves to remove HA. Second regarding the photocatalyst, quaternary Fe₃O₄/TiO₂-N-GO (FTNG) sono-photocatalysts with different amounts of Fe₃O₄ were first synthesized using a simple hydrothermal method. Characterizations were performed to confirm the successful synthesis of the sono-photocatalyst and to determine some of its properties. The influence of different experimental factors such as Fe₃O₄ content, ultrasonic power, catalyst dosage and initial HA concentration were studied. The first-order kinetic and second-order kinetic equations were used to simulate the experimental data. The results showed that FTNG-0.2 with 0.2 g of Fe₃O₄, which was added upon preparation, showed the highest sono-photocatalytic ability. In our experimental setup, greater than 99% removal efficiency (UV₂₅₄) and 94% mineralization rate (TOC) were achieved within 90 min at the optimum conditions (60 W ultrasound power and 1.0 g/L catalyst dosage for 30 mg/L HA). Compared with the pseudo-first-order kinetic model, pseudo-second-order model fitted better with the experimental data and it had higher R² values of 0.92, 0.98 and 0.98 for 30, 40 and 50 mg/L of HA, respectively. According to the scavenging tests and the ESR analysis, both of the OH and O₂^- were produced in the reaction, however, O₂^- radicals were assumed to be the dominating reactive species for the HA degradation. Moreover, after five repetitive experiments, the removal efficiency of HA can still reach 88.5%, indicating high stability of FTNG-0.2 sono-photocatalyst. The mechanism of degradation of HA by FTNG-0.2 in sono-photocatalytic system was mentioned based on several factors including the ultrasonic cavitation effect, Fenton-like reactions, photocatalytic reactions, etc. In fact, this was the first study to treat HA through sono-photocatalytic process, which showed great potential in drinking water treatment.

A magnetically separable and recyclable Ag-supported magnetic TiO2 composite catalyst: Fabrication, characterization, and photocatalytic activity

In this study, a magnetically separable, highly active, and recyclable photocatalyst was synthesized by physico-chemical incorporation of Ag, TiO₂, and Fe₃O₄ into one structure. The physical and chemical properties of the catalysts were evaluated by X-ray diffraction, X-ray fluorescence spectrometry, scanning electron microscopy, field emission transmission electron microscopy, energy dispersive X-ray spectroscopy, and diffuse reflectance spectroscopy. The Ag-supported magnetic TiO₂ composite demonstrated desirable properties and features such as a narrow band gap of 1.163 eV, modifiable structure, and high degradation efficiency. The activity and durability of the synthesized photocatalyst in the degradation of methyl orange (MO) in aqueous solutions under visible light irradiation and different experimental conditions were evaluated and compared to those of commercial TiO₂ and Ag/TiO₂ composites. It was found that the synthesized composite showed a much higher MO photodegradation efficiency than the other composites under visible light irradiation. Moreover, it exhibited a high photocatalytic activity and was recoverable and durable; its photocatalytic efficiency in MO removal was consistently higher than 93.1% after five reuses without any evident signs of deactivation. Thus, the developed photocatalyst is a very promising material for practical applications in environmental pollution remediation.

Reusable Photocatalytic Optical Fibers for Underground, Deep-Sea, and Turbid Water Remediation

An approach for underground, deep, and turbid water remediation is presented based on optical fibers with a photocatalytic coating. Thus, photocatalytic TiO2 P25 nanoparticles immobilized in a poly(vinylidene difluoride) (PVDF) matrix are coated on polymeric optical fibers (POFs) and the photocatalytic performance of the system is assessed under artificial sunlight. To the best of our knowledge, poly(methyl methacrylate)-POF coated with TiO2/PVDF and the reusability of any type of POF for photocatalytic applications are not previously reported. The photocatalytic efficiency of the hybrid material in the degradation of ciprofloxacin (CIP) and its reusability are evaluated here. It is shown that 50 w/w% of TiO2 P25 achieves a degradation of 95% after 72 h under artificial sunlight and a reusability of three times leads to a loss of activity inferior to 11%. The efficient removal of ciprofloxacin and the stability of the POF coated with TiO2 P25 successfully demonstrate its suitability in the degradation of pollutants with potential application in regions with low light illumination, as in underground and deep water.