Inactivation of Staphylococcus aureus in visible light by morphology tuned α-NiMoO4

Recent advances in designing and developing efficient sillenite-based materials for photocatalytic applications

Sillenite materials have been the subject of intense investigation for recent years due to their unique characteristics. They possess a distinct structure with space group I23, allowing them to exhibit distinctive features, such as an electronic structure ideal for certain applications such as photocatalysis. The present research delves into the structure, synthesis, and properties of sillenites, highlighting their suitability for photocatalysis. It explores also advanced engineering strategies for designing sillenite-based photocatalysts, including heterojunction formation, morphology modification, doping, and hybrid processes. Each strategy offers advantages and limitations that are critically discussed. The review then lists and discusses the photocatalytic performance of various sillenite-based systems recently developed for common applications, such as removing hazardous organic and inorganic contaminants, and even infrequent applications, such as microbial inactivation, H2 generation, CO2 reduction and N2 fixation. Finally, valuable insights and suggestions are put forward for future research directions in the field of sillenite-based photocatalysis. This comprehensive overview would provide a valuable resource for the development of efficient photocatalytic systems to address environmental and energy challenges.

Photocatalytic microbial disinfection under indoor conditions: Prospects and challenges of near IR-photoactive materials

The accumulation of microbes especially in the air and in water bodies is causing the major disease outbreaks. Indoor environment remediation methods are necessary today to clean up these microbes. Among the remediation methods available, in situ generation of highly reactive and oxidizing radical species by advanced oxidation processes (AOPs) inactivate most of the microbes unselectively. Of these AOPs, photocatalytic microbial disinfection especially under indoor conditions is of great interest to maintain microbe-free indoor environment. For efficient microbes' inactivation under indoor conditions, the near IR and IR response of the photocatalysts must be improved. Though the photocatalytic disinfection of microbes using semiconductor-based photocatalysts has been extensively investigated, most of the photocatalysts that have been investigated are either weekly responsive or totally not irresponsive to IR photons due to inappropriate bandgap energies. Several strategies have been investigated to enhance the light harvesting properties of semiconductor based photocatalysts under indoor conditions and make them active to near IR and IR radiations. This review summarizes the recent progress in the field of materials for photocatalysts employed for microbial removal in indoor environments over the past decade as well as outlines key perspectives to enlighten future researches. The paper details the fundamentals of photocatalysis and basic properties of photocatalytic materials in the disinfection of common microbes under indoor conditions. The applications of photocatalytic materials in the disinfection of microbes in indoor environmental conditions are discussed and reviewed. Finally, the remaining challenges and future strategies/prospects in the design and synthesis of IR (and near IR) responsive photocatalysts are discussed.

Assessment of the superior photocatalytic properties of Sn2+-containing SnO2 microrods on the photodegradation of methyl orange

A microporous Sn2+-containing SnO2 material presenting microrod morphology and a surface area of 93.0 m2 g-1 was synthesized via a simple hydrothermal route. Sn2+ ions were detected in the interior of the material (15.8 at.%) after the corrosion of a sample through sputtering. The material's optical properties have demonstrated the absorption of a considerable fraction of visible light up to wavelengths of 671 nm, due to the presence of Sn2+ states in the material's band structure. The analysis of the internal crystalline structure of a single microrod was carried out with the aid of a focused ion beam microscope and indicated that the material is mesocrystalline down to nanoscale level. It was proposed that the Sn2+ ions occupy intergranular sites in the highly defective crystalline structure of the material and that Sn2+ states, as well as its relatively large surface area, are responsible for the material's superior photoactivity. The synthesized material was tested as a photocatalyst to decompose hazardous contaminants in water. The photocatalytic performance of the material was much higher than those of commercial TiO2 and SnO2 materials, decomposing nearly all methyl orange (an azo-dye model) content in water (10 mg L-1) in 6 min under UV irradiation for a photocatalyst dose of 5.33 g L-1. The photodegradation of methyl orange was also verified under visible light.

Preparation of a high-efficiency low-toxicity CdS/C60 bactericide and investigation of the mechanism

Photocatalysis is considered as a promising technology to solve bacterial contamination, but the development of efficient photocatalysts with a strong generalizable light response remains a challenge. CdS has a suitable energy gap and good response to visible light, but the photogenerated carrier separation efficiency is low, and the photo-corrosion phenomenon leads to the significant release of Cd²⁺. In this paper, the CdS/C₆₀ composite photocatalyst bactericide is synthesized via a simple one-step hydrothermal method. Testing via EIS, I-t, PL, and TRPL show that the C₆₀ in the composite improves the hole-electron separation efficiency of CdS, resulting in a better photocatalytic performance. The complete inactivation of S. aureus and E. coli can be achieved within 40 min and 120 min, respectively, by dispersing 100 μg mL^-1 of CdS/C₆₀-2 in a diluted bacterial solution under simulated visible-light irradiation. Combined with ESR, SEM, fluorescence staining, DNA gel electrophoresis and ICP technology, it is believed that the high inactivation of bacteria is attributed to the ROS produced during the photocatalytic process, which destroy the integrity of the bacterial cell membrane and further destroy the DNA inside the bacteria, thus causing bacterial inactivation, rather than the inactivation being caused by Cd²⁺ toxicity.

Visible light-driven photocatalytic bacterial inactivation on PPE, supported by the DFT and bactericidal study

A novel ZnO-MoO₃-ZnMoO₃@graphene GZM composite catalyst prepared by microwave hydrothermal process for personal protective equipment textiles (PPE) is presented in this study. The results indicated that the GZM with defect vacancy sites of two types as observed by EPR showed significantly superior inactivation of the E. coli bacteria compared to GZM without the lower defect vacancy sites and concomitant lower electron densities. Photocatalytic activated oxidation by the GZM composites coatings was observed to proceed in acceptable times as well as the bacterial inactivation (log bact. C/C_o > 10⁷ within 3 h). Defect sites in the GZM seem to be important leading to the bacterial inactivation process. DFT calculations on the GZM with and without catalyst defect sites were carried out. The electron densities were estimated by the Fourier mapping. The results found in this study showed the potential of GZM-PPE for practical applications.

A review on led technology in water photodisinfection

The increase in efficiency achieved by UV LED devices has led to a compelling increase in research reports on UV LED water treatment for consumption in the past few years. This paper presents an in-depth review based on recent studies on the suitability and performance of UV LED-driven processes for water disinfection. The effect of different UV wavelengths and their combinations was analysed for the inactivation of various microorganisms and the inhibition of repair mechanisms. Whereas 265 nm UVC LED present a higher DNA damaging potential, 280 nm radiation is reported to repress photoreactivation and dark repair. No synergistic effects have been proved to exist when coupling UVB + UVC whereas sequential UVA-UVC radiation seemed to enhance inactivation. Benefits of pulsed over continuous radiation in terms of germicidal effects and energy consumption were also analysed, but with inconclusive results. However, pulsed radiation may be promising for improving thermal management. As a challenge, the use of UV LED sources introduces significant inhomogeneities in the light distribution, pushing for the development of adequate simulation methods to ensure that the minimum target dose required for the target microbes is achieved. Concerning energy consumption, selecting the optimal wavelength of the UV LED needs a compromise between the quantum efficiency of the process and the electricity-to-photon conversion. The expected development of the UV LED industry in the next few years points to UVC LED as a promising technology for water disinfection at a large scale that could be competitive in the market in the near future.

Frustrated Lewis pair boosting photocatalytic antibacterial activity on PDI-bridged bimetallic UiO-66-NH2

Designing frustrated Lewis pair (FLP)-structured photocatalysts is a new challenge in catalysis. In particular, the relationship between the active sites and photocatalytic charge transport mechanism over FLP-structured photocatalysts is still ill-defined. In this study, a novel perylene-3,4,9,10-tetracarboxylic diimide/UiO-66(Ti/Zr)-NH₂ (denoted as PDI/TUZr) photocatalyst is successfully constructed using an ammoniation process. The PDI/TUZr heterojunction is equipped with a unique "Zr/Ti SBUs-ligand-PDI" FLP structure and exhibits remarkable catalytic FLP properties. In this "Zr/Ti SBUs-ligand-PDI" structure, the Zr/Ti bimetal centers and PDI serve as Lewis acid and base sites, respectively, and the C-N chemical bond provides a channel for electron transmission, and a bimetallic system facilitates electron transfer from excited ligand to Zr/Ti-SBUs nodes. These superior microstructural designs cooperate to promote substrate activation for photocatalytic antibacterial reactions. Accordingly, 2.2-fold enhancement is achieved in visible photocatalytic antibacterial activity on Staphylococcus aureus for 4%PDI/0.2TUZr composite compared with unadorned UZr. This study provides insights into the formation and carrier transfer behaviors of solid FLP on MOFs and illustrates a rational strategy for the construction of highly efficient photocatalysts.

An Overview of Recent Developments in Improving the Photocatalytic Activity of TiO2-Based Materials for the Treatment of Indoor Air and Bacterial Inactivation

Indoor air quality has become a significant public health concern. The low cost and high efficiency of photocatalytic technology make it a natural choice for achieving deep air purification. Photocatalysis procedures have been widely investigated for environmental remediation, particularly for air treatment. Several semiconductors, such as TiO₂, have been used for photocatalytic purposes as catalysts, and they have earned a lot of interest in the last few years owing to their outstanding features. In this context, this review has collected and discussed recent studies on advances in improving the photocatalytic activity of TiO₂-based materials for indoor air treatment and bacterial inactivation. In addition, it has elucidated the properties of some widely used TiO₂-based catalysts and their advantages in the photocatalytic process as well as improved photocatalytic activity using doping and heterojunction techniques. Current publications about various combined catalysts have been summarized and reviewed to emphasize the significance of combining catalysts to increase air treatment efficiency. Besides, this paper summarized works that used these catalysts to remove volatile organic compounds (VOCs) and microorganisms. Moreover, the reaction mechanism has been described and summarized based on literature to comprehend further pollutant elimination and microorganism inactivation using photocatalysis. This review concludes with a general opinion and an outlook on potential future research topics, including viral disinfection and other hazardous gases.

C-TiO2+Ni and ZnO+Ni Magnetic Photocatalyst Powder Synthesis by Reactive Magnetron Sputtering Technique and Their Application for Bacteria Inactivation

In the current study, a bi-layered magnetic photocatalyst powder consisting of a Ni layer on one side and carbon-doped TiO2 or ZnO photocatalyst layers on the other side was synthesized by magnetron sputtering technique. SEM, XRD, and XPS analysis of powders revealed that the photocatalytic TiO2 layer had a mixed anatase-rutile structure, was doped by carbon to approximately 3 at. % and had a fraction of Ti(III) oxide. Meanwhile, the ZnO layer was crystalized in a wurtzite structure and had a considerable number of intrinsic defects, which are useful for visible light photocatalysis. The activity of magnetic photocatalyst powder was tested by photocatalytic bleaching of dyes, as well as performing photocatalytic inactivation of Salmonella bacteria under UV and visible light irradiation. It was observed, that C-TiO2+Ni magnetic photocatalyst had relatively high and stable activity under both light sources (for five consecutive cycles dye degradation reached approximately 95%), but ZnO+Ni was generally lacking in activity and stability (over five cycles under UV and visible light, dye degradation fell from approximately 60% to 55% and from 90% to 70%, respectively). Photocatalytic treatment of bacteria also provided mixed results. On one hand, in all tests bacteria were not inactivated completely. However, on the other hand, their susceptibility to antibiotics increased significantly.

Co(OH)2 Nanoflowers Decorated α-NiMoO4 Nanowires as a Bifunctional Electrocatalyst for Efficient Overall Water Splitting

The development of bifunctional electrocatalysts with high catalytic activity and cyclic stability is an effective method for electrocatalytic water splitting. Herein, a promising hydroxide/oxide Co(OH)2/α-NiMoO4 NWs/CC heterostructure with nanoflowers decorating the nanowires was fabricated on a carbon cloth (CC) substrate via hydrothermal and calcination methods. In contrast to one-dimensional nanomaterials, the interfaces of Co(OH)2 nanoflowers and α-NiMoO4 nanowires on CC provide more active sites for electrocatalytic reactions; therefore, they exhibit obviously enhanced electrocatalytic activities in overall water splitting. Specifically, the Co(OH)2/α-NiMoO4 NWs/CC electrodes exhibit an overpotential of 183.01 mV for hydrogen evolution reaction (HER) and of 170.26 mV for oxygen evolution reactions (OER) at the current density of 10 mA cm−2 in 1.0 M KOH. Moreover, the electrocatalytic oxygen evolution reaction (OER) activity of the Co(OH)2/α-NiMoO4 NWs/CC electrocatalyst was enhanced after long-term stability tests.

Membrane disruption boosts iron overload and endogenous oxidative stress to inactivate Escherichia coli by nanoscale zero-valent iron

The inactivation of microorganisms by nanoscale zero-valent iron (nZVI) was extensively reported, but what happens inside the cells is rarely explored. Herein, we revealed that nZVI caused the drastic increase of intracellular iron concentrations, which subsequently catalyzed the Haber-Weiss reaction to produce high levels of endogenous reactive oxygen species (ROSs) and inactivated E. coli cells by oxidative damage of DNA, evidenced by the significantly higher inactivation efficiencies of E. coli mutant strains deficient in iron uptake regulation and DNA repair than the parental strain. The intracellular iron levels, endogenous ROSs levels and the inactivation efficiencies of E. coli were positively correlated. The permeabilized cytomembrane due to the close contact between nZVI and E. coli was responsible for the iron overload. This work demonstrates experimentally for the first time that nZVI causes iron overload and endogenous oxidative stress to inactivate E. coli, thus deepening our knowledge of the nZVI antimicrobial mechanism.

A Review of the Use of Semiconductors as Catalysts in the Photocatalytic Inactivation of Microorganisms

Obtaining clean and high-quality water free of pathogenic microorganisms is a worldwide challenge. Various techniques have been investigated for achieving an effective removal or inactivation of these pathogenic microorganisms. One of those promising techniques is photocatalysis. In recent years, photocatalytic processes used semiconductors as photocatalysts. They were widely studied as a green and safe technology for water disinfection due to their high efficiency, being non-toxic and inexpensive, and their ability to disinfect a wide range of microorganisms under UV or visible light. In this review, we summarized the inactivation mechanisms of different waterborne pathogenic microorganisms by semiconductor photocatalysts. However, the photocatalytic efficiency of semiconductors photocatalysts, especially titanium dioxide, under visible light is limited and hence needs further improvements. Several strategies have been studied to improve their efficiencies which are briefly discussed in this review. With the developing of nanotechnology, doping with nanomaterials can increase and promote the semiconductor’s photocatalytic efficiency, which can enhance the deactivation or damage of a large number of waterborne pathogenic microorganisms. Here, we present an overview of antimicrobial effects for a wide range of nano-photocatalysts, including titanium dioxide-based, other metal-containing, and metal-free photocatalysts. Promising future directions and challenges for materials research in photocatalytic water disinfection are also concluded in this review.

A critical review on strategies for improving efficiency of BaTiO3-based photocatalysts for wastewater treatment

Barium titanate (BaTiO₃) photocatalysts with perovskite structures are promising candidates for the effective removal of hazardous organic pollutants from water/wastewater owing to several advantages, including low cost, non-toxicity, high stability, environmental friendliness, favorable band positions, high oxygen vacancies, multiple crystal phases, rapid migration of charge carriers at the surface, band bending, spontaneous polarization, and easy tailoring of the sizes and morphologies. However, this high dielectric/ferroelectric material is only active in UV light (band gap: 3.2 eV), which reduces the photocatalytic degradation performance. To make barium titanate more suitable for photocatalysis, the surfaces of the powders can be modified to broaden the absorption band. In this paper, various strategies for improving photocatalysis of barium titanate for removing organic pollutants (mostly dyes and drugs) from water/wastewater are critically reviewed. They include modifying the sizes and morphologies of the particles by varying the reaction times and synthesis temperatures, doping with metals/non-metals, loading with noble metal NPs (Ag and Au), and fabrication of heterojunction photocatalysts (conventional type II and Z-scheme). The current challenges and possible future directions of BaTiO₃-based materials are also discussed. This comprehensive review is expected to advance the design of highly efficient BaTiO₃-based materials for photocatalytic applications in water/wastewater treatment.

Toxicity profiling of metallosurfactant based ruthenium and ruthenium oxide nanoparticles towards the eukaryotic model organism Saccharomyces cerevisiae

In the present study, a facile method was used to synthesize the ruthenium and ruthenium oxide (RuO₂) nanoparticles (NPs) derived from three different metallosurfactants. Firstly, three metallosurfactants were fabricated i.e. RuCTAC (Bishexadecyltrimethylammonium ruthenium tetrachloride), RuDDA (Bisdodecylamine ruthenium dichloride), and RuHEXA (Bishexadecylamine ruthenium dichloride) and characterized by CHN, FTIR, and ¹HNMR. These metallosurfactants were further utilized to fabricate the mixed type of NPs (Ru and RuO₂ NPs) using the biocompatible microemulsion technique and NPs were then characterized. Subsequently, the nanotoxicity of mixed NPs (Ru & RuO₂) was studied towards Saccharomyces cerevisiae. The detailed study of nanotoxicity against the S. cerevisiae cells was done by employing optical microscopy, FESEM, anti-yeast activity assay, circular dichroism, and gel electrophoresis techniques. FESEM and optical microscopy analyses indicated that RuCTAC nanosuspension (Ns) has the most toxic effect on the S. cerevisiae cells. FESEM analysis confirmed the harmful impact of Ru and RuO₂ NPs on the S. cerevisiae cells. From the FESEM analysis, complete alteration in the morphology, cell membrane breakage, and formation of the holes on the cell wall of S. cerevisiae was affirmed in presence of all three types of Ns i.e. RuCTAC, RuDDA, and RuHEXA Ns. Genotoxicity of the NPs was confirmed by circular dichroism and gel electrophoresis and it was found that RuCTAC and RuHEXA Ns have the most damaging influence on the yeast genomic DNA.

A critical review on modulation of NiMoO4-based materials for photocatalytic applications

Semiconductor photocatalysis has been widely utilized to solve the problems of energy shortage and environmental pollution. Among the explored photocatalysts, nickel molybdate (NiMoO₄) has revealed many advantages for photocatalytic applications, which include visible light absorption, low cost, environment-friendly, large surface area, good electrical conductivities, and tailorable band structure. However, the recombination of photogenerated carriers, which diminishes photocatalytic efficiency, has been held as a major hurdle to the widespread application of this material. To overcome this limitation, various surface modulations such as morphology control, doping of heteroatom, deposition of noble metal nanoparticles, and fabrication of composite structures have been explored in many published studies. This article comprehensively reviews the recent progress in the modulations of NiMoO₄-based materials to improve the photocatalytic efficiency. The enhanced photocatalytic capabilities of NiMoO₄-based materials are reviewed in terms of such applications as pollutant removal, disinfection of bacteria, and water splitting. The current challenges and possible future direction of research in this field are also highlighted. This comprehensive review is expected to advance the design of highly efficient NiMoO₄-based materials for photocatalytic applications.

Fluorescein-Metal Hybrid Surfactant Conjugates as a Smart Material for Antimicrobial Photodynamic Therapy against Staphylococcus aureus

Photodynamic therapy (PDT) has been extensively used as an effective alternative for the treatment of bacterial infection using photosensitizers (PSs) in the presence of appropriate light. However, the limitation in the effectiveness of PDT is because of the low yield of singlet oxygen from existing PSs because of their low solubility. Thus, we have developed a platform to enhance the solubility and the photodynamic activity of PSs against bacterial cells using metallosurfactants. Herein, we have used manganese metal-containing single- (MnC I) and double-chain metallosurfactants (MnC II) which show an interplay of electrostatic/hydrophobic interactions with fluorescein (FL) dye (as a PS) and when used in the presence of light enhances the PDT. These interactions play a significant role in enhancing the singlet oxygen generation efficiency of FL. MnC I and MnC II have shown good antimicrobial activity against Gram-positive Staphylococcus aureus (S. aureus) bacteria. More interestingly, these metallosurfactants when combined with FL significantly enhanced the affectivity against S. aureus, wherein 100% killing was achieved. As compared to experiments performed in the dark, the metallosurfactant, by enhancing the solubility of FL, increases the formation of singlet oxygen upon light irradiation and thus increases cell death. Therefore, the synergistic effect of FL (light toxicity) and metallosurfactants (dark toxicity) defined excellent reduction in the colony formation of bacteria. These results were corroborated through field-emission scanning electron microscopy and optical microscopy, where the rupturing of the cell wall of bacterial cells was observed during this therapy. Moreover, the binding of metallosurfactants to the genomic DNA of S. aureus was also evaluated by gel retardation analysis and UV-visible spectroscopy. The outcomes from this study will deliver formulations for PDT which can be used in clinical medical applications and cancer therapy in the future.

Visible light driven MoS2/α-NiMoO4 ultra-thin nanoneedle composite for efficient Staphylococcus aureus inactivation

MoS₂/α-NiMoO₄ ultra-thin nanoneedle composite was synthesized by microwave hydrothermal process in one step. The nanocomposite revealed the complete destruction of multidrug resistant Staphylococcus aureus (S. aureus) within 150 min under visible light irradiation. According to electron spin resonance measurement and radical trapping experiment, it has been established that O₂¯ acts as a major active species for bacterial inactivation in visible light. The bacterial inactivation was further proved by membrane deformities in bacterial cell membrane, DNA fragmentation, and protein destruction. TEM- elemental mapping confirms the inactivation of S. aureus by reactive oxygen species (ROS) but not the toxicity of photocatalyst. Transient photocurrent responses, electrochemical impedance spectroscopy, and cyclic voltammetry measurements reveal the efficient separation of electron-hole pairs in the composite photocatalyst. The composite photocatalyst shows greater ROS production, higher degree of DNA fragmentation and protein degradation, detrimental effects on the morphology of the bacterial cell wall, outstanding transient photocurrent responses, reduction of interfacial charge transfer resistance, superb oxidation/reduction potential, strong visible light absorption, and adequate separation of photogenerated electron-hole pairs as compared to host photocatalyst. The photocatalytic inactivation mechanism was explained. So, this promising composite photocatalyst can be applied for inactivation of multidrug resistant bacteria in biological waste water.

Morphologies controlled ZnO for inactivation of multidrug-resistant Pseudomonas aeruginosa in solar light

The different morphology and size of the zinc oxide (ZnO) were synthesized by a co-precipitation process via variation of calcination temperature from 400 °C to 900 °C. The nanorod, flower, hexagon, pentagon, and microflambeau morphologies were obtained. The flower morphology of ZnO tends to inactivate multidrug-resistant Pseudomonas aeruginosa (P. aeruginosa) completely within 45 min under solar light irradiation better than other morphologies due to efficient separation electron-hole pairs. The prevention of charge recombination was confirmed by transient photocurrent response and electrochemical impedance spectra measurements. Electron spin resonance spectroscopy suggests that [Formula: see text] OH·, and h+ are responsible for P. aeruginosa inactivation in solar light. Furthermore, P. aeruginosa inactivation was confirmed by transmission electron microscope (TEM) images, DNA fragmentation (gel electrophoresis) and protein degradation (Bradford assay). The TEM mapping illustrates the damage of bacteria by active species but not the release of Zn2+ ions in the bacterial cell. So, this work provides a detailed investigation of morphology/size-dependent photocatalytic inactivation of a multidrug-resistant pathogen in solar light.

The effects of nickel oxide nanoparticles on structural changes, heme degradation, aggregation of hemoglobin and expression of apoptotic genes in lymphocytes

Nickel oxide nanoparticles (NiO NPs) have received great interests in medical and biotechnological applications. However, their adverse impacts against biological systems have not been well-explored. Herein, the influence of NiO NPs on structural changes, heme degradation and aggregation of hemoglobin (Hb) was evaluated by UV-visible (Vis) spectroscopy, circular dichroism (CD) spectroscopy, fluorescence spectroscopy, transmission electron microscopy (TEM), and molecular modeling investigations. Also, the morphological changes and expression of Bax/Bcl-2 mRNA in human lymphocyte cell exposed to NiO NPs were assayed by DAPI staining and quantitative real-time PCR (qPCR), respectively. The UV-Vis study depicted that NiO NPs resulted in the displacement of aromatic residues and heme groups and production of the pro-aggregatory species. Intrinsic and Thioflavin T (ThT) fluorescence studies revealed that NiO NPs resulted in heme degradation and amorphous aggregation of Hb, respectively, which the latter result was also confirmed by TEM study. Moreover, far UV-CD study depicted that NiO NPs lead to substantial secondary structural changes of Hb. Furthermore, near UV-CD displayed that NiO NPs cause quaternary conformational changes of Hb as well as heme displacement. Molecular modelling study also approved that NiO NPs resulted in structural alterations of Hb and heme deformation. Moreover, morphological and genotoxicity assays revealed that the DNA fragmentation and expression ratio of Bax/Bcl-2 mRNA increased in lymphocyte cells treated with NiO NPs for 24 hr. In conclusion, this study indicates that NiO NPs may affect the biological media and their applications should be limited.Communicated by Ramaswamy H. Sarma.

Bactericidal effects of metallosurfactants based cobalt oxide/hydroxide nanoparticles against Staphylococcus aureus

This work deals with the fabrication of metallosurfactants derived cobalt oxide and hydroxide nanosuspensions (Ns) by microemulsion method and their antimicrobial, cytotoxic, genotoxic, antioxidant and cytostatic activity have been investigated. The methodology used is environmentally compliant as no external reducing agent was used. Three metallosurfactants i.e. CoCTAC (Bishexadecyltrimethylammonium cobalt tetrachloride), CoDDA (Bisdodecylamine cobalt dichloride) and CoHEXA (bishexadecylamine cobalt dichloride) were used. Co-metallosurfactants were synthesized, characterized and were utilized for the preparation of mixed microemulsion to yield nanosuspensions. Nanoparticles prepared were characterized using Transmission electron microscopy (TEM), Field Emission Scanning Electron Microscope (FESEM), Energy Dispersive X-ray Spectroscopy (EDS), X-ray Diffraction (XRD), UV-vis spectroscopy and Zeta potential. The nanoparticles were found to be spherical, with size range 1-5 nm, for all the three precursors. Further, their cytotoxicity, genotoxicity, and antimicrobial activity were investigated against Staphylococcus aureus (S. aureus). To evaluate these activities, techniques such as gram staining method, agar well diffusion, and colony forming unit count (CFU) were utilized. From all these experiments it was confirmed that CoCTAC Ns has maximum antimicrobial activity against multiple medicine resistant S. aureus. Circular dichroism and gel electrophoresis also validated the vigorous genotoxic effect of CoCTAC Ns. The antimicrobial activity trend investigated from CFU experiment was CoCTAC Ns (2 × 10⁵ CFU/mL) > CoDDA Ns (17 × 10⁵ CFU/mL) > CoHEXA Ns (46.5 × 10⁵ CFU/mL). FESEM authenticated the effect of Co Ns on the morphology of S. aureus. Cell shrinkage, formation of holes, change of morphology, and cell wall rupturing was observed for all three cases but most significant antibacterial activity was noted for the case of CoCTAC Ns. In addition, antiproliferative activity was also examined against HepG2 cells (human liver cancer cell line) and HEK293 cells (human embryonic kidney cell line). After 70% confluency of cells, cobalt oxide/hydroxide Ns were added by diluting the nanosuspension in 0.2, 0.4, 0.5, and 0.8% V/V ratio to check the cell viability.

Understanding Mechanism of Photocatalytic Microbial Decontamination of Environmental Wastewater

Several photocatalytic nanoparticles are synthesized and studied for potential application for the degradation of organic and biological wastes. Although these materials degrade organic compounds by advance oxidation process, the exact mechanisms of microbial decontamination remains partially known. Understanding the real mechanisms of these materials for microbial cell death and growth inhibition helps to fabricate more efficient semiconductor photocatalyst for large-scale decontamination of environmental wastewater or industries and hospitals/biomedical labs generating highly pathogenic bacteria and toxic molecules containing liquid waste by designing a reactor. Recent studies on microbial decontamination by photocatalytic nanoparticles and their possible mechanisms of action is highlighted with examples in this mini review.