A simple colorimetric chemosensor with highly performance for detection of cyanide and copper ions and its practical application in real samples

Luminous Insights: Exploring Organic Fluorescent "Turn-On" Chemosensors for Metal-Ion (Cu+2, Al+3, Zn+2, Fe+3) Detection

There are several metal ions that are vital for the growth of the environmental field as well as for the biological field but only up to the maximum limit. If they are present in excess, it could be hazardous for the human health. With the growing technology, a series of various detection techniques are employed in order to recognize those metal ions, some of them include voltammetry, electrochemical methods, inductively couples, etc. However, these techniques are expensive, time consuming, requires large storage, advanced instrumentation, and a skilled person to operate. So, here comes the need of a sensor and it is defined as a miniature device which detects the substance of interest by giving response in the form of energy change. So, from past few decades, many sensors have been formulated for detecting metal ions with some basic characteristics like selectivity, specificity, sensitivity, high accuracy, lower detection limit, and response time. Detecting various metal ions by employing chemosensors involves different techniques such as fluorescence, phosphorescence, chemiluminescence, electrochemical, and colorimetry. The fluorescence technique has certain advantages over the other techniques. This review mainly focuses on the chemosensors that show a signal in the form of fluorescence to detect Al+3, Zn+2, Cu+2, and Fe+3 ions.

A ferrocene-based chemo-dosimeter for colorimetric and electrochemical detection of cyanide and its estimation in cassava flour

A simple chemo-dosimeter VDP2 bearing a ferrocene moiety was designed, synthesized, and characterized, and exhibited both chromogenic and electrochemical responses selectively for CN- in H2O-DMSO (9 : 1, v/v) medium. The probe VDP2 showed an instantaneous color change from colorless to yellow with CN- that can readily be observed visually. The deprotonation of the benzimidazole -NH, followed by nucleophilic addition of CN- to the olefinic C-atom, as evidenced by 1H and 13C NMR titration experiments, caused the colorimetric and electrochemical responses. The mass spectral study, CV, FTIR and Mulliken charges computed well supported the proposed mechanism. The electrochemical limit of detection was calculated to be 72 nM. The results of DFT and TD-DFT calculations suggested that the colorless nature of the probe VDP2 is due to weak intramolecular charge transfer (ICT) transition and the yellow color of the VDP2+CN adduct is due to through-space ICT transition. Above all, the probe could be an ideal candidate for monitoring cyanide in water samples and cassava flour with practical significance. A simple and convenient colorimetric method was developed to determine cyanide content in cassava flour.

Advances in chromone-based copper(ii) Schiff base complexes: synthesis, characterization, and versatile applications in pharmacology and biomimetic catalysis

Chromones are well known as fundamental structural elements found in numerous natural compounds and medicinal substances. The Schiff bases of chromones have a much wider range of pharmacological applications such as antitumor, antioxidant, anti-HIV, antifungal, anti-inflammatory, and antimicrobial properties. A lot of research has been carried out on chromone-based copper(ii) Schiff-base complexes owing to their role in the organometallic domain and promise as potential bioactive cores. This review article is centered on copper(ii) Schiff-base complexes derived from chromones, highlighting their diverse range of pharmacological applications documented in the past decade, as well as the future research opportunities they offer.

A Handy Chemical Sensor Based on Benzaldehyde and Imidazo[1,2-a]pyridine Mixture for Naked-eye Colorimetric and Fluorescent Detection of F. J Fluoresc 2023;33:2381-2390. [PMID: 37071230 DOI: 10.1007/s10895-023-03195-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Upon the Schiff base condensation reaction of imidazo[1,2-a]pyridine-2-carbohydrazide and 2,5-dihydroxybenzaldehyde, a bimodal colorimetric and fluorescent chemosensor 1o for assaying fluoride (F-) in DMSO was synthesized. The characterization of 1o structure was obtained by 1H NMR, 13C NMR and MS.The structure of 1o was characterized by 1H NMR, 13C NMR and MS. Under the presence of various anions, 1o could be applied for naked-eye and fluorescent detection of F- (naked eye: colorless to yellow; fluorescence: dark to green) and displayed promising performance, such as high selectivity and sensitivity, as well as a low detection limit. Upon calculation, the detection limit of chemosensor 1o for F- was 193.5 nM, which is well below the allowed maximum value of F- (1.5 mg/L) by WHO. As the intermolecular proton transfer mechanism induced "turn-on" fluorescent signal and naked-eye color change of F- to 1o through deprotonation effect, which was confirmed by Job's plot curve, mass spectrometry and 1H NMR titration. Alternatively, the chemosensor 1o can be effectively manufactured into test strips to detect fluoride in solid state, which is user-friendly with no additional equipment required.

Investigation on intermolecular interaction of synthesized azo dyes with bovine serum albumin

This research was performed using spectroscopic techniques and molecular docking to elucidate the mechanisms of interaction between bovine serum albumin (BSA) and two novel synthesized azo dyes. The titration of dyes into BSA solution results in quenching of fluorescence emission by complex formation. The UV-Vis spectroscopy confirms that formation of complex in ground state between both dyes and BSA induces conformational and micro environmental changes of the protein. Based on the calculation of the thermodynamic parameters, it can be concluded that both dyes spontaneously bind onto BSA, and van der Waals force and hydrogen bonding interaction played a predominant roles in the process of spontaneous bonding. The average binding distance (r) between protein and both dyes was calculated by Förster energy transfer measurements and revealed both dyes bind to the BSA residues of tryptophan over short distances. The results of molecular docking studies indicated that the probable binding location of both dyes is subdomain IB of BSA via hydrophobic interaction and hydrogen bond. Furthermore, as shown by synchronous fluorescence and Fourier transform infrared spectroscopy, both dyes can lead to conformational changes of BSA, which alter its biological functions.Communicated by Ramaswamy H. Sarma.

Binding elucidation of azo dyes with human serum albumin via spectroscopic approaches and molecular docking techniques

The large number of synthesized azo dyes is widely applied in the food, pharmaceutical, cosmetic, textile, and leather industries. In this study, the binding mechanism of two synthesized dyes with human serum albumin (HSA); as the most abundant protein in plasma; was elucidated by fluorescence spectroscopy, Fourier-transform infrared spectroscopy and molecular modeling methods. The fluorescence quenching measurements showed that each dye can quench the intrinsic fluorescence of HSA via a dynamic quenching mechanism with an increase in concentration. From the thermodynamic data observations, revealed that the binding process is a spontaneous molecular force for each dye with HSA due to hydrophobic interactions and hydrogen bonding. FT-IR spectra showed that the secondary structure of the protein changes due to interaction of each dye with HSA. Furthermore, docking simulation demonstrated that the probable binding location of both dyes is subdomain IIA of HSA (Sudlow site I) and that complex formed is stabilized by hydrophobic interactions and hydrogen bonding.Communicated by Ramaswamy H. Sarma.

Synthesis and application of a new chemosensor based on the thiazolylazo-quinazolinone hybrid for detection of F- and S2- in aqueous solutions

A new chemosensor based on the thiazolylazo-quinazolinone hybrid (TAQH) was designed and synthesized for naked-eye sensitive detection of F^- and S^2-in aqueous acetonitrile solution. Spectral characterization of TAQH using FT-IR, ¹H NMR, and ¹³C NMR analysis revealed that the probe TAQH was successfully synthesized using a two steps reaction, including the diazotization-coupling and condensation reactions, respectively. The ion sensing ability of TAQH toward a wide range of anions and metal ions was evaluated by naked-eye detection method and UV-Vis absorption spectroscopy. The chemosensor TAQH displayed a fast and clear color change from yellow to red in the presence of F^- and S^2- ions, enabling easily detect with the naked eye. This clear color change is due to the effective interaction of the basic F^- and S^2- anions with hydroxyl group of chemosensor as a binding site. The experimental data also revealed that the F^- and S^2- ions were sensed by the probe TAQH over a wide pH range from 3 to 8. The results also confirmed that the TAQH has a wide linear detection range for F^- and S^2- ions. From UV-vis titration experiment, the limit of detection (LOD) for F^- and S^2- ions was found to be 3.1 μM and 5.7 μM, respectively. For quantitative measurements, the paper test strips containing TAQH were successfully fabricated and applied to detect F^- and S^2- ions in aqueous solutions. Furthermore, Job's plot based on spectroscopic data showed one-to-one stoichiometry for the interaction of anions with probe TAQH. Therefore, the proposed chemosensor with excellent features like the cost-effective, high sensitively and selectively and short response times can be utilized in any physical and biological conditions.

Simultaneous measurement of hydrogen carbonate and acetate anions using biologically active receptor based on azo derivatives of naphthalene

A novel receptor based on azo-derivatives of 1-naphthylamine (2-((E)-((4-chloro-3-(trifluoromethyl)phenyl)imino)methyl)-4-((E)-naphthalene-1-yldiazenyl)phenol(2) abbreviated CTNP was successfully designed and synthesized. Its sensing properties were studied deeply. Systematic studies of CTNP with HCO₃^- and AcO^- anions in DMSO disclosed that there is hydrogen-bonding between CTNP and incoming anions. Significant changes in the visible region of the spectrum, as well as a drastic color change of CTNP from pale yellow to red, observed due to interaction as mentioned earlier. The stoichiometry of [CTNP: HCO₃^- or AcO^-] complexes and association constants determined through Job's method and Benesi-Hildebrand (B-H) plot, respectively. Taking into account the analysis results, CTNP performs the selective recognition of sub-millimolar concentrations of HCO₃^- and AcO^- efficiently. The antifungal activity of the receptor was tested against Aspergillus brasiliensis and Aspergillus niger. CTNP exhibited excellent antifungal activity against both strains. CTNP also represented antibacterial activity against Gram-positive bacteria: Staphylococcus epidermidis. It was cleared that designed receptor can be applied under physiological conditions for a long duration.

A simple pyrimidine based colorimetric and fluorescent chemosensor for sequential detection of copper (II) and cyanide ions and its application in real samples

In this study, a new pyrimidine-based chemosensor (PyrCS) has been developed for sequential detection of copper (II) and cyanide ions. The PyrCS has revealed high sensitivity and selectivity toward copper ion over other metal ions in aqueous media. The PyrCS as an optical probe exhibited a distinct color change and a bathochromic shift in UV spectra in the presence of copper ion in a few seconds due to the formation of stable complex (PyrCS-Cu²⁺). The results confirmed that the PyrCS has a widely linear detection range of 0.3-30 μM toward Cu²⁺. The calculated limit of detection for Cu²⁺ ions was low as 0.116 μM. Moreover, the fluorescent intensity of PyrCS at 507 nm was significantly quenched in the presence of Cu²⁺ and Fe²⁺ ions. Additionally, complex PyrCS-Cu²⁺ was successfully used to detect cyanide ions via Cu²⁺ displacement approach. The free PyrCS was recovered after adding the CN‾ ions in a few seconds due to the formation of the stable copper cyanide complex Cu(CN)_x. The calculated LOD for CN‾ ions was low as 0.320 μM. The data also clarified that the other competing anions did not create a clear color change in solutions. Since the proposed method could provide a vivid colorimetric response in the presence of detected analytes within the pH range of 3-9, we can claim that the developed chemosensor can be utilized in any physical and biological conditions.

A novel chromone based colorimetric sensor for highly selective detection of copper ions: Synthesis, optical properties and DFT calculations

In this work, a new chromone based colorimetric sensor (ChrCS) was developed for highly selective detection of copper ions in semi-aqueous media. Evaluation of color and spectral changes displayed by the developed sensor shows that the sensor can be applied to detect copper ions in the presence of other competing metal ions and anions. The developed sensor, which contains biologically active chromone ring, shows excellent selectivity at microlevel for Cu²⁺ with a color change from colorless to yellow. Job's plot based on spectroscopic data showed the complex formation between ChrCS and Cu²⁺ ions has the stoichiometric ratio of 1:1 (ChrCS-Cu²⁺ complex). In addition, the binding constant of the ChrCS to Cu²⁺ was determined using the Benesi-Hildebrand equation. Furthermore, the test papers of the developed ChrCS were successfully prepared and employed to detect different concentration Cu²⁺ (10^-3 M to 10^-7 M) in aqueous solution. Importantly, sensor ChrCS was applied to detect Cu²⁺ ions in real water samples. To better understand the optical character of ChrCS and the effect of metal ion titration, density functional theory (DFT) calculations at the B3LYP/6-31 + G(d,p) level were performed for ChrCS and its complex ChrCS-Cu²⁺. Furthermore, on the basis of the Job's plot analysis DFT calculations, and reversible nature of the developed sensor, the sensing mechanism was demonstrated.

Metal and metal-oxide nanozymes: bioenzymatic characteristics, catalytic mechanism, and eco-environmental applications

Phenolic contaminants (R-OH) are a category of highly toxic organic compounds that are widespread in aquatic ecosystems and can induce carcinogenic risk to wildlife and humans; natural enzymes as green catalysts are capable of step-polymerizing these compounds to produce diverse macromolecular self-coupling products via radical-mediated C-C and C-O-C bonding at either the ortho- or para-carbon position, thereby evading the bioavailability and ecotoxicity of these compounds. Intriguingly, certain artificial metal and metal-oxide nanomaterials are known as nanozymes. They not only possess the unique properties of nanomaterials but also display intrinsic enzyme-mimicking activities. These artificial nanozymes are expected to surmount the shortcomings, such as low stability, easy inactivation, difficult recycling, and high cost, of natural enzymes, thus contributing to eco-environmental restoration. This review highlights the available studies on the enzymatic characteristics and catalytic mechanisms of natural enzymes and artificial metal and metal-oxide nanozymes in the removal and transformation of R-OH. These advances will provide key research directions beneficial to the multifunctional applications of artificial nanozymes in aquatic ecosystems.