Photoresponsive azobenzene ligand as an efficient electron acceptor for luminous CdTe quantum dots

Harnessing bromide ions to boost peroxymonosulfate for reactive yellow 145 dye degradation

Bromide (Br-) was found in the fresh waters at concentrations from 0.1 to 1 mg/L and can be used to activate peroxymonosulfate (PMS) as a widely used chemical oxidation agent. In the present study, the reaction between PMS and Br- ions (PMS/Br- process) for the effective degradation of reactive yellow 145 (RY-145) dye was investigated by changing operational parameters vis solution pH, dosage of Br- ions and PMS, RY-145 concentration, and reaction time. Based on the results, the simultaneous presence of PMS and Br- ions in the solution led to efficient degradation of RY-145 with a synergistic index of 11.89. The degradation efficiency of RY-145 was decreased in severe basic pH and the presence of CO32- ions as a coexisting anion. Likewise, 4 mg/L of humic acid (HA), used as a classic scavenger, led to a 26.53% decrease in the RY-145 degradation efficiency. The free bromine (HOBr/OBr-), superoxide radical (●O2-), and singlet oxygen (1O2) was the dominant oxidation agents in RY-145 degradation, which confirmed the nonradical degradation pathway. In addition, PMS/Br- process showed excellent ability in mineralizing RY-145 in different aqueous solutions (total organic carbon (TOC) decreased 86.39% in deionized water and 78.23% in tap water). Although pollutants such as azo dyes can be effectively removed in the PMS/Br- process, the formation of byproducts should be strategically controlled and special attention should be paid when the PMS-based advance oxidation process is applied to treat Br- containing solutions.

Copper indium sulfide quantum dots enabling quantitative visible light photoisomerisation of (E)-azobenzene chromophores

Azobenzene derivatives have long been studied for their photochromic behaviour. One of the greatest challenges in this field is the quantitative (E) to (Z) photoconversion triggered by visible light irradiation. In this work, the synthesis and characterization of CuInS2 quantum dots (CIS-QDs) appended with azobenzene units are reported: quantitative (E) → (Z) isomerisation is obtained by visible light (e.g., λex = 533 nm). Interestingly, catalytic amounts of CIS-QDs allow the full photoconversion of ungrafted (E)-azobenzene derivatives into the corresponding (Z)-isomers using visible light. This peculiar behaviour is associated with the direct complexation of the (Z)-isomer on the QD surface.

Optically Switchable NIR Photoluminescence of PbS Semiconducting Nanocrystals using Diarylethene Photoswitches

Precisely modulated photoluminescence (PL) with external control is highly demanded in material and biological sciences. However, it is challenging to switch the PL on and off in the NIR region with a high modulation contrast. Here, we demonstrate that reversible on and off switching of the PL in the NIR region can be achieved in a bicomponent system comprised of PbS semiconducting nanocrystals (NCs) and diarylethene (DAE) photoswitches. Photoisomerization of DAE to the ring-closed form upon UV light irradiation causes substantial quenching of the NIR PL of PbS NCs due to efficient triplet energy transfer. The NIR PL fully recovers to an on state upon reversing the photoisomerization of DAE to the ring-open form with green light irradiation. Importantly, fully reversible switching occurs without obvious fatigue, and the high PL on/off ratio (>100) outperforms all previously reported assemblies of NCs and photoswitches.

Luminescent silicon nanocrystals appended with photoswitchable azobenzene units

Confinement of multiple azobenzene chromophores covalently linked at the surface of luminescent silicon nanocrystals preserves the photoswitching behavior and modulates the nanocrystal polarity. Concomitantly, the thermal Z→E isomerization is strongly accelerated and the nanocrystal luminescence is reduced by an energy transfer process resulting in photosensitized E→Z isomerization.

Light-Triggered Switching of Quantum Dot Photoluminescence through Excited-State Electron Transfer to Surface-Bound Photochromic Molecules

This paper describes reversible "on-off" switching of the photoluminescence (PL) intensity of CdSe quantum dots (QDs), mediated by photochromic furylfulgide carboxylate (FFC) molecules chemisorbed to the surfaces of the QDs. Repeated cycles of UV and visible illumination switch the FFC between "closed" and "open" isomers. Reversible switching of the QDs' PL intensity by >80% is enabled by different rates and yields of PL-quenching photoinduced electron transfer (PET) from the QDs to the respective isomers. This difference is consistent with cyclic voltammetry measurements and density functional calculations of the isomers' frontier orbital energies. This work demonstrates fatigue-resistant modulation of the PL of a QD-molecule complex through remote control of PET. Such control potentially enables applications, such as all-optical memory, sensing, and imaging, that benefit from a fast, tunable, and reversible response to light stimuli.

Highly stretchable and tough alginate-based cyclodextrin/Azo-polyacrylamide interpenetrating network hydrogel with self-healing properties

Most structural self-healing materials were developed based on either reversible supramolecular interaction or dynamic covalent bonding. It seems a good idea to incorporate self-healing properties into high-performance materials. In this study, we fabricated the alginate-based cyclodextrin and polyacrylamide azobenzene highly stretchable and tough interpenetrating composite hydrogel with self-repairing behavior under light irradiation. Initially, the alginate-based cyclodextrin and polyacrylamide azobenzene were designed and synthesized. The corresponding structural, thermal, and morphological properties of hydrogels were characterized. The reversible transformation of the sol-gel can be achieved by the irradiation upon ultraviolet light and visible light. The self-healing behavior of this composited gel is based on the host-guest interaction between cyclodextrin and azobenzene. The recovery gel elongation at 48 h healing in the dark condition was is 0.04 MPa, with an elongation of 1140 %. Therefore, this gel can achieve self-healing ability while maintaining highly stretchable and tough performance.

Interfacial charge transfer processes in 2D and 3D semiconducting hybrid perovskites: azobenzene as photoswitchable ligand

In the vast majority of studies on semiconductor particles ligands or capping agents are used that bind to the surface of the particles covering them with an electrically insulating shell. Since the transport of charge carriers and/or energy across interfaces is desirable for a variety of applications, the use of π-conjugated ligands becomes increasingly interesting. Among them are compounds that react to external stimuli. Molecular switches in particular are fascinating because the properties of the interfaces can be potentially adjusted as required. However, there is debate about how the properties of such special ligands are influenced by the presence of a semiconductor and vice versa. Here ammonium-modified azobenzene compounds were selected as prototypes for molecular switches and organic-inorganic hybrid perovskites as semiconductor materials. The class of ammonium-lead-halide phases as prototypes is peculiar because, in addition to the surface functionalization of 3D crystals, organic compounds can actually be incorporated into the crystal as 2D phases. Thus, for example, layered Ruddlesden-Popper phases are obtained. We present photoswitchable azobenzene ligands with different head-group lengths for the synthesis of 2D and 3D hybrid perovskite phases. The energy transfer mechanisms are influenced by the length of the molecular spacer moiety, which determines the distance between the π system and the semiconductor surfaces. We find huge differences in the photoswitching behaviour between the free, surface-coordinated and integrated ligands between the perovskite layers. Photoswitching of azobenzene ligands incorporated in 2D phases is nearly quenched, while the same mechanism for surface-coordinating ligands is greatly improved, compared to the free ligands. The improvement originates from an energy transfer from perovskite to azobenzene, which is strongly distance-dependent. This study provides evidence for the photoswitching of azobenzenes as ligands of hybrid perovskites, which depends on the spacing between the chromophore and the perovskite phase.

Photoinduced charge carrier dynamics in a ZnSe quantum dot-attached CdTe system

A new nanohybrid material is prepared by attaching CdTe nanoneedles (NNs) to surface-modified ZnSe quantum dots (QDs). The NNs and QDs are prepared by a colloidal synthesis method in an aqueous alkaline medium. The surface modification and the attachment of nanostructures are achieved by a bifunctional ligand 3-mercaptopropionic acid (3-MPA). The band gap of the ZnSe QDs is varied by controlling the size of the QDs in order to get the maximum overlap between the absorption band of the CdTe NNs and the emission band of the ZnSe QDs, which is a prerequisite for effective charge/energy transfer. The possibility of photoinduced charge transfer (PCT) and Förster resonance energy transfer (FRET) from the donor (QDs) to the acceptor (NNs) has been assessed. Very fast (less than 800 ps) PCT and FRET from QDs to NNs occur because the emission band of QDs overlaps with the absorption band of NNs. The calculated large value of the overlapping integral, J(λ) ∼4.5 × 10¹⁹M^-1cm^-1nm⁴, of the donor and the acceptor bands proves the feasibility of energy transfer. These findings suggest that the ZnSe QDs can exchange photoinduced energy with the CdTe NNs effectively over a wide distance in a CdTe-ZnSe nanohybrid.