Highly selective and sensitive peptide-based fluorescent chemosensor for detection of Zinc(II) ions in aqueous medium and living cells

Eco-friendly Fluorescent Sensor for Sensitive and Selective Detection of Zn2+ and Fe3+ Ions: Applications in Human Hair Samples

A new eco-friendly sensor, 3-((6-((4-chlorobenzylidene)amino)pyridin-2-yl)imino)indolin-2-one (CBAPI) was synthesized and well characterized. The CBAPI sensor was employed for detecting Zn2+ and Fe3+ ions. It exhibited a low limit of detection at pH 6.0, with values of 2.90, for Zn2+ and 3.59 nmol L-1 for Fe3+ ions. The sensor demonstrated high selectivity over other interfering cations. Additionally, the high binding constants reflect the great affinity of sensor towards Zn2+ and Fe3+ ions. To further validate its quantification ability for Zn2+ ions, the synthesized CBAPI sensor was used to determine Zn levels in human hair samples, and the results were confirmed using atomic absorption spectroscopy (AAS). The AGREE metric tool was used to assess the method's environmental impact and practical applicability. These positive outcomes indicated that the new method for detecting Zn2+ and Fe3+ ions is environmentally friendly and safe for humans. The developed CBAPI sensor represents a potential development in metal ion detection, combining sensitivity, selectivity, and rapidity.

Recent Advances in Fluorescent Probes for Zinc Ions Based on Various Response Mechanisms

Zinc is a vital metal element with extensive applications in various fields such as industry, metallurgy, agriculture, food, and healthcare. For living organisms, zinc ions are indispensable, and their deficiency can lead to physiological and metabolic abnormalities that cause multiple diseases. Hence, there is a significant need for selective recognition and effective detection of free zinc ions. As a probe method with high sensitivity, high selectivity, real-time monitoring, safety, harmlessness and ease of operation, fluorescent probes have been widely used in metal ion identification studies, and many convenient, low-cost and easy-to-operate fluorescent probes for Zn²⁺ detection have been developed. This article reviews the latest research advances in fluorescent chemosensors for Zn²⁺ detection from 2019 to 2023. In particular, sensors working through photo-induced electron transfer (PET), excited state intramolecular proton transfer (ESIPT), intramolecular charge transfer (ICT), fluorescence resonance energy transfer (FRET), chelation-enhanced fluorescence (CHEF), and aggregation-induced emission (AIE) mechanisms are described. We discuss the use of various recognition mechanisms in detecting zinc ions through specific cases, some of which have been validated through theoretical calculations.

Peptide-based colorimetric and fluorescent dual-functional probe for sequential detection of copper(Ⅱ) and cyanide ions and its application in real water samples, test strips and living cells

A novel dual-functional peptide probe FLH based on fluorescent "on-off-on" strategy and colorimetric visualization method was designed and synthesized. This new probe exhibited highly selective and rapid detection of Cu²⁺ with significant fluorescent "turn-off" response, with a visible colorimetric change from yellow to orange. The combination ratio of FLH to Cu²⁺ (1:1) was determined using ESI-HRMS spectra and Job's plot. The fluorescent emission showed a good linear response (R² = 0.9986) with a low detection limit of 1.5 nM. In addition, the FLH-Cu²⁺ complex displayed colorimetric changes and a fluorescent "off-on" response toward CN^- over a wide pH range from 7 to 12. This detection behavior was observed within 20 s, with a limit of detection (LOD) for CN^- at 12.7 nM. Based on stability and accuracy, FLH was next developed as dual-functional test strips, and was also successfully applied to detect Cu²⁺ and CN^- in two actual water samples. More importantly, the cytotoxicity studies indicated that FLH had good biocompatibility and low toxicity, and was successfully utilized for monitoring Cu²⁺ and CN^- in living cells through fluorescence imaging.

A bifunctional peptide-based fluorescent probe for ratiometric and "turn-on" detection of Zn(II) ions and its application in living cells

In this work, a bifunctional peptide-based fluorescent probe L containing a tetrapeptide scaffold (Pro-Gly-His-Trp-NH₂) and a dansyl group was synthesized using solid phase peptide synthesis (SPPS) technology. As designed, L, based on a FRET mechanism, exhibited high selectivity, excellent ratiometric signals, and fast response to Zn²⁺ in aqueous solutions at an excitation wavelength of 280 nm. In addition, when excited at 320 nm, L exhibited a fluorescent "turn-on" response towards Zn²⁺ based on PET mechanism. More importantly, the stoichiometry of L and Zn²⁺ was determined to be 2:1 by fluorescent titration, Job's plot method, and ESI-MS spectrometry. The association constant for Zn²⁺ ions was determined to be 6.26 × 10⁸ M^-2, while the limit of detection (LOD) of L was estimated as 5.43 nM, which is a much lower value than WHO and EPA guidelines for drinking water. Moreover, L was successfully applied to detect both Zn²⁺ and Cu²⁺ in living cells due to good biocompatibility and excellent low toxicity.

A novel peptide-based fluorescent probe with a large stokes shift for rapid and sequential detection of Cu2+ and CN- in aqueous systems and live cells

A novel fluorescent probe (DSD) was reasonably designed and synthesized with dansyl-labeled dipeptide (Dan-Ser-Asp-NH₂). DSD featured remarkably large Stokes shift (230 nm) and perfect water solubility, and exhibited high selectivity and rapid recognition toward Cu²⁺via fluorescence quenching. The detection limit of DSD for Cu²⁺ was 2.4 nM, indicated that DSD has excellent sensitivity. In addition, the stoichiometry between DSD and Cu²⁺ were detected as 1:1 by fluorescence titration, Job's plot and ESI-HRMS data. As designed, DSD-Cu²⁺ system was able to sequentially detect CN^- according to the displacement approach with fluorescence "off-on" response, and the detection limit for CN^- was calculated to be 41.9 nM. Specifically, the response time of DSD with Cu²⁺ and CN^- was less than 40 s, which rendered it suitable for real time detection in actual water samples. In addition, with the alternate addition of Cu²⁺ and CN^-, the reversible cycles could be repeated for at least 10 times, indicated that DSD was a promising reversibility probe. DSD showed low toxicity and good biocompatibility, and was successfully applied to detect Cu²⁺ and CN^- in living cells.

A dansyl-based fluorescent probe for sensing Cu2+ in aqueous solution

A fluorescent probe based on a glycyl-L-tyrosine-modified dansyl derivative (D-GT) is designed and synthesized. D-GT demonstrated great detection performance toward Cu²⁺ in an aqueous solution. Fluorescence quenching occurred due to the coordination of Cu²⁺ with D-GT. The sensitive detection of D-GT to Cu²⁺ was applied in aqueous solution within a wide pH span (6-12). A 1:1 coordinate stoichiometric way and an association constant of 6.47 × 10⁴ M^-1 between D-GT and Cu²⁺ were determined. The measured detection limit for Cu²⁺ in HEPES buffer solution (10 mM, pH 7.4) was 0.69 μM. The probe displayed an appropriate sensitivity toward Cu²⁺ in real drinking water samples and living cells, which reveals the potential applications of D-GT in complicated environments.

A Simple Isoniazid-Based N-Acylhydrazone Derivative as Potential Fluorogenic Probe for Zn2+ Ions

This study evaluated three isoniazid-based N-acylhydrazone derivatives (HL1, HL2, and HL3) varying their substituting groups (-H, -N(CH₃)₂, and -NO₂) as potential chemosensors for Zn²⁺ ions. To this end, the absorption and emission properties of these derivatives were investigated in the presence of Zn²⁺ ions. Results point to the derivative HL2 as the best chemosensor for Zn²⁺ ions because of its comparatively higher sensitivity. The color of this derivative changed from colorless to strong yellow with zinc addition, as indicated by the shift in UV-vis spectrum. Moreover, HL2 was the only derivative to emit fluorescence in the presence of Zn²⁺ ions, attributable to PET inhibition and bond isomerization promoted by coordination with this metal. LOD, LOQ, and binding constant values for HL2 + Zn²⁺ were 0.43 μmol.l^-1, 0.93 μmol.l^-1, and 5.04 × 10¹² l.mol^-1, respectively. The fluorescence of HL2 with other metal ions (Fe³⁺, Mg²⁺, Na⁺, Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, Ca²⁺, and K⁺) was also investigated. Zn²⁺ yielded the best result without Cd²⁺ interferences. Job's Plot showed that the stoichiometric ratio of the complex formed by HL2 and Zn²⁺ ions is 2:1 (ligand:metal). The strip test with adsorbed HL2 indicated fluorescence in the presence of zinc ions under 365 nm UV irradiation.

A novel peptide-based fluorescent probe for sensitive detection of zinc (II) and its applicability in live cell imaging

In this work, we report SPSS synthesis of a new peptide-based fluorescent probe (L) capable of detecting Zn²⁺ with little interference in 100% aqueous solutions at physiological pH. Furthermore, L showed excellent sensitivity, with a detection limit of 26.77 nM. The 2:1 binding ratio between L and Zn²⁺ was determined using fluorometric titration, Job's plot and ESI-MS analyses. The "off-on-off" type fluorescence change of L was demonstrated by alternately adding Zn²⁺ and EDTA based on a formation-separation process of the complex, indicating that L could serve as a reversible probe. Moreover, MTT studies demonstrated that L has low biotoxicity, and could be successfully used for detection of Zn²⁺ and EDTA in live cells.

Highly sensitive turn-on detection of mercury(II) in aqueous solutions and live cells with a chemosensor based on tyrosine

Herein, we reported a novel fluorescent chemosensor (DY) based on dansyl group and tyrosine by solid phase peptide synthesis (SPPS) for the detection of mercury(II) ions with excellent selectivity among 17 different metal ions. As designed, DY exhibited a sensitive fluorescence "turn-on" response to Hg²⁺ with low detection limits of 22.65 nM. A stoichiometric ratio (2: 1) of chemosensor DY and Hg²⁺ ions was determined by a Job's plot, fluorescent titration and the ESI-MS spectra. Especially, the reversible of DY-Hg with EDTA establishes the reuse of DY, and the circulation effect was very good. Furthermore, the wide pH range of 6-10 makes it capable of application in biological systems. Moreover, DY has been successfully applied to the detection of Hg²⁺ ions and EDTA in living HeLa and HK2 cells based on low cytotoxicity and good membrane permeability.

A novel fluorescent chemosensor for detection of mercury(II) ions based on dansyl-peptide and its application in real water samples and living LNcap cells

Mercury is one of the most hazardous pollutants, and mercury pollution is a serious hazard to our environment. Herein, we designed and synthesized a new peptide-based fluorescent chemosensor (L) based on a Fmoc-Lys (Fmoc)-OH backbone conjugated with two Serines and dansyl groups using solid phase peptide synthesis (SPPS) technology. L exhibited highly selective and excellent sensitive detection of Hg²⁺ ions in 100% aqueous solutions through fluorescence quenching. The chemosensor L forms a 2:1 stoichiometry with high binding constants (4.89×10⁶M^-1) and the detection limit for Hg²⁺ ions of the proposed assay was 7.59nM. In addition, the recovery test results of Hg²⁺ concentration in actual water samples showed that the quantitative detection of Hg²⁺ ions can be realized in two water samples. Moreover, L showed low cytotoxicity and excellent membrane permeability in HK2 cells, which has been successfully applied for monitoring Hg²⁺ ions in living LNCaP cells.