Synthesis of novel p-n-p BiOBr/ZnO/BiOI heterostructures and their efficient photocatalytic performances in removals of dye pollutants under visible light

Highly visible-light-active sulfur and carbon co-doped TiO2 (SC-TiO2) heterogeneous photocatalysts prepared by underwater discharge plasma

To promptly and simply create highly crystalline S/C co-doped TiO2 (SC-TiO2) photocatalysts at room temperature and atmospheric pressure, we suggest a novel plasma-assisted sol-gel synthesis method. This method is a simultaneous synthetic process, in which an underwater plasma undergoes continuous reactions to generate high-energy atomic and molecular species that enable TiO2 to achieve crystallinity, a large surface area, and a heterogeneous structure within a few minutes. In particular, it was demonstrated that the heterogeneously structured TiO2 was formed by doping that sulfur and carbon replace O or Ti atoms in the TiO2 lattice depending on the composition of the synthesis solution during underwater plasma treatment. The resultant SC-TiO2 photocatalysts had narrowed bandgap energies and extended optical absorption scope into the visible range by inducing the intermediate states within bandgap due to generation of oxygen vacancies on the surface of TiO2 through synthesis, crystallization, and doping. Correspondingly, SC-TiO2 showed a significant degradation efficiency ([k] = 6.91 h-1) of tetracycline (TC, antibiotics) under solar light irradiation, up to approximately 4 times higher compared to commercial TiO2 ([k] = 1.68 h-1), resulting in great water purification. Therefore, we anticipate that this underwater discharge plasma system will prove to be an advantageous technique for producing heterostructural TiO2 photocatalysts with superior photocatalytic efficiency for environmental applications.

Sharp-edged pencil type ZnO flowers and BiOI flakes combined with carbon nanofibers as heterostructured hybrid photocatalysts for the removal of hazardous pollutants from contaminated water

The growth of advanced micro-and nanostructures with metal oxides has consistently generated extraordinary interest in energy and environmental applications. Cutting-edge nanostructures exhibit superior reactive sites and surface areas, thus improving the performance in crucial domains. In this study, sharp-edged pencil-type ZnO flowers and BiOI flakes as pristine materials, and their composition with carbon nanofibers (CNFs) (ZnO-BiOI@CNFs) as a hetero hybrid catalyst as well as binary compositions such as ZnO-BiOI, ZnO@CNFs, and BiOI@CNFs catalysts were fabricated using a simple and convenient hydrothermal synthesis process. The composition of newly produced innovative nanostructures was examined for azo dye degradation under solar simulator exposure. Dye degradation of ∼95% was achieved by the hybrid catalyst (ZnO-BiOI@CNFs) during 120 min of irradiation, which was ∼1.8 and 2.1-times higher than pristine ZnO and BiOI nanostructures, respectively. The improved hybrid catalysts were able to degrade methyl orange (MO) and rhodamine B (RhB) dyes. Importantly, mixed dyes RhB, MO, and azo dye demonstrated 47% dye degradation using a hybrid catalyst. These mixed dye-scalable hybrid catalyst performances offer additional insights into commercialization/industrialization. The outstanding performance of the hybrid catalyst is attributed to the unidirectional electron flow with pencil-like ZnO, a catalyst with a larger absorption zone, high surface area, and reactive sites, particularly ZnO and BiOI nanostructures, and decreased recombination rate with a heterojunction interface. In addition, CNFs can operate as electron traps and sinks, providing very quick redox reactions. To produce the sophisticated nanostructures with homogeneous morphologies, this work presents new insights into energy and environmental applications.

Fabrication of ternary UiO-66(Ce)/Ag/BiOBr heterojunction for enhanced photocatalytic degradation of ketoprofen via effective electron transfer process: Pathways, DFT calculation and mechanism

Photocatalytic oxidation technique is considered as one of the most prospective approaches to solve the problem of environmental pollution. Herein, the novel ternary nanocomposite UiO-66(Ce)/Ag/BiOBr was fabricated via simple synthetic strategy. The obtained UiO-66(Ce)/Ag/BiOBr exhibited an excellent performance and photocatalytic efficiency of ketoprofen reached 93.5% after 180 min illumination. The ·OH and ·O₂^- were main active species and play an important role during the photocatalytic reaction. Furthermore, intermediate products and degradation pathways of ketoprofen were analyzed based on the 3D-EEM, DFT calculation and LC-MS. The possible reaction mechanism was proposed as follows: (1) the successful construction of heterojunction broadened the light absorption range to the visible light region; (2) the design of Ce-based MOFs provided more chances for electron transfer due to the Ce⁴⁺/Ce³⁺ cycling; (3) the combination of plasmon resonance effect, Schottky junction and effect of Ag bridge was an important strategy to accelerate charge transfer and improve photocatalytic efficiency.

Graphitic carbon nitride based immobilized and non-immobilized floating photocatalysts for environmental remediation

In solar photocatalysis, light utilization and recycling of powder from reaction solution are the main obstructions that hinder the photocatalytic efficacy of any photocatalyst. In this respect, a floatable system is effective for efficient solar photocatalysis by light utilization. Due to the maximum solar light absorption property, floating nanocomposite photocatalyst is an appealing substitute for effective wastewater treatment. Floating photocatalysts are a non-oxygenated and non-stirred solution that is a good light harvester, stable, non-toxic, biodegradable, naturally abundant in nature. They also have low density, a simple preparation process, no need to stir, and high porosity. Due to these characteristics, floating photocatalysts are widely favored and ideal candidates for practical environmental remediation. Several researchers have come up with new and innovative ways for immobilizing capable photocatalyst on a floatable substrate to produce floating nanocomposite photocatalytic material. In recent decades, g-C₃N₄-based floating photocatalysts have gained a lot of attention as g-C₃N₄ is a visible light active photocatalyst with unique and exceptional properties. It also has good photocatalytic activity in waste water treatment and environmental remediation. Many previous reports have studied the logical design and manufacturing method for heterojunction floating photocatalysts and immobilized floating photocatalysts. Based on those studies, we have focused on the g-C₃N₄ based immobilized and non-immobilized floating photocatalysts for pollutant degradation. We have also categorized immobilized floating photocatalyst based on several lightweight substrates such as expanded perlite and glass microbead. In addition, future challenges have been discussed to maximize solar light absorption and to improve the efficiency of broadband response floating photocatalysts. Floating photocatalysis is an advanced technique in energy conversion and environmental remediation thus requires special consideration.

One-pot synthesis of bismuth yttrium tungstate nanosheet decorated 3D-BiOBr nanoflower heterostructure with enhanced visible light photocatalytic activity

A visible light driven BiOBr/Bi_xY_1-xWO₆ nanocomposite photocatalyst of various compositions are prepared by the addition of different amounts of KBr (0.5, 1.0, 1.5, 2.0 mmol) in Bi_xY_1-xWO₆ by a one-pot hydrothermal method. Furthermore, the photocatalytic properties of the as-prepared materials are analyzed by the decomposition of methylene blue under visible light illumination. In particular, the BiOBr/Bi_xY_1-xWO₆ nanocomposite prepared by taking 1.5 mmol of KBr present a superior photocatalytic ability (78.3%) with the rate constant value 0.016 min^-1, a low bandgap (E_g = 2.51 eV) as well as photoluminescence emission intensity than other photocatalysts prepared in this study. The radical scavenging studies revealed that OH and h⁺ performed an imperative role in the decomposition of methylene blue. Furthermore, the optimized photocatalyst is stable even after four cycles, which exposes the excellent photostability and reusability properties of the photocatalyst. In addition, a plausible mechanism of decomposition of methylene blue under visible light irradiation is also proposed.

Two-Step Visible Light Photocatalytic Dye Degradation Phenomena in Ag2O-Impregnated ZnO Nanorods via Growth of Metallic Ag and Formation of ZnO/Ag0/Ag2O Heterojunction Structures

Visible light photocatalytic activity follows the single-slope pseudo-first-order reaction kinetics in pristine ZnO nanorods, while for pure Ag₂O, a two-slope paradigm is pursued with a higher slope at a later period. For the Ag₂O-impregnated ZnO heterostructured nanorod photocatalyst, the two-step photocatalysis phenomena proceed with dye degradation rate constants emerging higher than those of individual ZnO and Ag₂O, at both time zones. Improved performance of ZnO/Ag₂O heterostructures arises initially from the reduced e^-/h⁺ recombination rate by the synergistic effect between ZnO and Ag₂O. At a later phase, metallic Ag is produced, which traps the valence electrons of Ag₂O nanoparticles and advances the e^-/h⁺ separation across the ZnO/Ag⁰/Ag₂O heterojunction structures, rendering them promptly accessible for dye degradation. At an increased Ag₂O loading, the photodegradation rate constants boost up in both time zones, and the corresponding crossover time (t_C) between the two phases steadily diminishes, leading toward a unique photocatalytic phenomenon that prevails with a superior rate constant. The optimized ZAO₂₅ heterostructure photocatalyst demonstrates ∼96.24% photodegradation of methylene blue (MB) dye within 30 min of visible light exposure, and its degradation rate constant is ∼0.24848 min^-1, which is ∼26.75 times superior than that of pristine ZnO samples. The metal-induced biphasic photocatalysis phenomena have never been reported earlier.

Recent developments on bismuth oxyhalides (BiOX; X = Cl, Br, I) based ternary nanocomposite photocatalysts for environmental applications

Photocatalytic treatment of organic pollutants present in wastewater using semiconductor nanomaterials under light irradiation is one of the efficient advanced oxidation processes. Stable metal oxide (e.g. TiO₂) based semiconductor photocatalytic systems have been mainly investigated for this purpose. Nevertheless, their large band gap (~3.2 eV) makes them inefficient in utilization of visible light portion of solar light leading to a lower degradation efficiency. Investigations have focused on the development of visible light responsive bismuth oxyhalides (BiOX; X = Cl, Br, I), one of the potential nanomaterials with unique layered structure, for efficient absorption of solar light for the degradation of pollutants. However, the rapid recombination rate of photogenerated charge carriers limits their practical applicability. To overcome such drawbacks, the development of BiOX based ternary nanocomposites received significant attention because of their unique structural and electronic properties, improved visible light response and increased separation and transfer rate of photogenerated charge carriers. This review aims to provide a comprehensive overview of the recent developments on bismuth oxyhalides-based ternary nanocomposites for enhanced environmental pollutants decomposition under visible light irradiation. The principles of photocatalysis, synthetic methodologies of bismuth oxyhalides and their characteristics such as heterojunctions formation, improved visible light response and separation rate of charge carriers and the mechanisms for enhanced visible light photocatalytic activity are discussed. In addition, the future prospects on the improvement in the photocatalytic activity of bismuth oxyhalides-based ternary nanocomposites are also discussed. This review could be beneficial for designing new ternary nanocomposites with superior visible light photocatalytic efficiency.

Facile Synthesis of Mesoporous Ag2O-ZnO Heterojunctions for Efficient Promotion of Visible Light Photodegradation of Tetracycline

Fabrication of 3D mesoporous Ag₂O-ZnO heterojunctions at varying Ag₂O contents has been achieved through poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (Pluronic F-108) as the structure-directing agent for the first time. The mesoporous Ag₂O-ZnO nanocomposites exhibited a mesoporous structure, which revealed a large pore volume and high surface area. The photocatalytic efficiency over mesoporous Ag₂O-ZnO nanocomposites for tetracycline (TC) compared with that over commercial P-25 and pristine ZnO NPs through the visible light exposure was studied. Mesoporous 1.5% Ag₂O-ZnO nanocomposites indicated the highest degradation efficiency of 100% of TC during 120 min of the visible light exposure compared with 5% and 10% for pristine ZnO NPs and commercial P-25, respectively. The TC degradation rate took place much rapidly over 1.5% Ag₂O-ZnO nanocomposites (0.798 μmol L^-1 min^-1) as compared to either commercial P-25 (0.097 μmol L^-1 min^-1) or ZnO NPs (0.035 μmol L^-1 min^-1). The mesoporous 1.5% Ag₂O-ZnO nanocomposite revealed the highest degradation rate among all synthesized samples, and it was 23 and 8 orders of magnitudes greater than those of pristine ZnO NPs and P-25, respectively. The photoluminescence and transient photocurrent intensity behaviors have been discussed to explore photocatalysis mechanisms. It is anticipated that the present work will contribute some suggestions for understanding other heterojunctions with outstanding behaviors.

Co3O4/Bi4O5I2/Bi5O7I C-Scheme Heterojunction for Degradation of Organic Pollutants by Light-Emitting Diode Irradiation

Remediation of organic pollutant matrixes from wastewater by photodegradation using different heterojunctions is extensively studied to improve performance for potential application. Brilliant black (BB) and p-nitrophenol (PNP) have been detected in the environment and implicated as directly or indirectly carcinogenic to human health. This work analyzes their elimination from aqueous solutions under visible-light irradiation with composites of cobalt(II, III) oxide and bismuth oxyiodides (Co₃O₄/Bi₄O₅I₂/Bi₅O₇I). The synthesized nanomaterial properties were investigated using various techniques such as BET, SEM/EDS, TEM, XRD, FTIR, PL, and UV-vis. All the nanocomposites absorbed in the visible range of the solar spectrum with band gaps between 1.68 and 2.79 eV, and the specific surface area of the CB2 composite increased by 35.8% from that of Bi₄O₅I₂/Bi₅O₇I. There was an observed massive reduction in the rate of electron and hole recombination, and the band gaps of the composites decreased. The mineralization of PNP and BB was followed by determination of the total organic carbon with reductions of 93.6 and 83.7%, respectively. The main active species were the hydroxyl radicals, while the superoxide anion radical and generated holes were minor as confirmed by radical trapping experiments. The optimum pHs for degradation of PNP and BB were 9.6 and 5.3, respectively. The enhanced performance of the catalyst was due to C-scheme heterojunction formation that reduced the electron and hole recombination rate and was attributed to strong adsorption of the pollutants on the photocatalyst active surface. The nanocomposite is apposite for solar energy-driven remediation of organic pollutants from environmental aqueous samples.