Novel synthesized azo-benzylidene-thiourea as dual naked-eye chemosensor for selective detection of Hg2+ and CN¯ ions

Colorimetric differentiation of arsenite and arsenate anions using a bithiophene sensor with two binding sites: DFT studies and application in food and water samples

Chemosensor N7R1 with two acidic binding sites was synthesized, and the ability of the sensor to differentiate arsenite and arsenate in the organo-aqueous medium was evaluated using colorimetric sensing methods. N7R1 distinguished arsenite with a peacock blue color and arsenate with a pale green color in a DMSO/H2O (9 : 1, v/v) solvent mixture. The specific selectivity for arsenite was achieved in DMSO/H2O (7 : 3, v/v). The sensor demonstrated stability over a pH range of 5 to 12. The computed high binding constant of 9.3176 × 1011 M-2 and a lower detection limit of 11.48 ppb for arsenite exposed the chemosensor's higher potential for arsenite detection. The binding mechanism with a 1 : 2 binding process is confirmed using UV-Vis and 1H NMR titrations, electrochemical studies, mass spectral analysis and DFT calculations. Practical applications were demonstrated by utilizing test strips and molecular logic gates. Chemosensor N7R1 successfully detected arsenite in real water samples, as well as honey and milk samples.

A ferrocene-based chemo-dosimeter for colorimetric and electrochemical detection of cyanide and its estimation in cassava flour

A simple chemo-dosimeter VDP2 bearing a ferrocene moiety was designed, synthesized, and characterized, and exhibited both chromogenic and electrochemical responses selectively for CN- in H2O-DMSO (9 : 1, v/v) medium. The probe VDP2 showed an instantaneous color change from colorless to yellow with CN- that can readily be observed visually. The deprotonation of the benzimidazole -NH, followed by nucleophilic addition of CN- to the olefinic C-atom, as evidenced by 1H and 13C NMR titration experiments, caused the colorimetric and electrochemical responses. The mass spectral study, CV, FTIR and Mulliken charges computed well supported the proposed mechanism. The electrochemical limit of detection was calculated to be 72 nM. The results of DFT and TD-DFT calculations suggested that the colorless nature of the probe VDP2 is due to weak intramolecular charge transfer (ICT) transition and the yellow color of the VDP2+CN adduct is due to through-space ICT transition. Above all, the probe could be an ideal candidate for monitoring cyanide in water samples and cassava flour with practical significance. A simple and convenient colorimetric method was developed to determine cyanide content in cassava flour.

Structural, optimization of and mechanistic insights into a new thiosemicarbazone derivative as a highly sensitive and selective chemosensor for Hg2+ recognition using DFT, COSMO-RS, RSM, and molecular dynamics simulation approaches

A new thiosemicarbazone derivative, N-(2-hydroxyphenyl)-2-[1-(pyridin-4-yl)ethylidene]hydrazinecarbothioamide (HPEH), has been synthesized, characterized, and further developed as a highly selective and sensitive colorimetric chemosensor for Hg2+ recognition in environmental water samples. Structural conformers of HPEH were successfully identified using a combination of the potential energy surface (PES) and time-dependent density functional theory (TD-DFT) methods. The synthesized HPEH was successfully characterized further and analyzed based on its harmonic vibrational frequencies, NMR spectra, and electronic transitions using the DFT approach. Sigma profiles were generated using the COSMO-RS approach to identify a compatible medium for HPEH to act as a chemosensor. The conditions for the highly sensitive and selective detection of Hg2+ by HPEH were successfully optimized using the statistical response surface methodology approach. The optimum sensing of HPEH occurred in an 8:2 v/v DMSO/pH 7.8 solution at a 20:60 μM HPEH/Hg2+ concentration and after a reaction time of 18 min, with statistically significant independent variables (p < 0.05) for all parameters. Under optimal conditions, the lowest Hg2+ concentration detected by HPEH was 3.56 µM, indicating that HPEH can serve as an alternative and comparable probe for the detection of Hg2+ in aqueous systems. Using the optimized results, the interaction between HPEH and Hg2+ in the chemosensor system was successfully modeled, and the model was subsequently used with the TD-DFT, non-covalent interaction-reduced density gradient (NCI-RDG), and molecular dynamics approaches to gain mechanistic insights into the interaction. The results showed that the newly synthesized HPEH, in addition to being cost-effective, could serve as a suitable alternative and comparable chemosensor for Hg2+ recognition in water samples, with the advantages of being efficient, portable, and eco-friendly, and offering rapid analysis without the need of specialized training.

A facile synthesis of a novel 4-hydroxyl-3-azo coumarin based colorimetric probes for detecting Hg2+ and a fluorescence turn-off response of 3CBD to Fe3+ in aqueous environment

Two azo dyes, (E)-3-(benzo[d]thiazol-2-yldiazenyl)-4-hydroxy-2H-chromen-2-one (3CBD) and (E)-4-hydroxy-3-(quinolin-2-yldiazenyl)-2H-chromen-2-one (3CQD), were designed and synthesized using facile methods. The structures were validated through FTIR and NMR spectroscopy. The photophysical property analyses were further studied using UV-Vis and fluorescence spectrophotometers. Consequently, the absorption and emission spectra of 3CBD confirmed its selectivity of Hg2+ and turn-off response to Fe3+. On the other hand, the absorption spectra analysis of 3CQD demonstrated selectivity in the presence of Hg2+. The colorimetric investigations demonstrated a significant visual response specifically for Hg2+, enabling real-time analysis in the corresponding solutions. The presence of other coexisting metal ions does not interfere with the detection of the target metal ion. The fluorescence studies of the two probes revealed that 3CBD was highly fluorescent, which was significantly quenched by Fe3+, upon excitation at 340 nm. Utilizing Job plot analyses, it was determined that the complexes 3CBD-Hg2+ and 3CQD-Hg2+ exhibit a binding stoichiometry of 1 : 1. The association constants for these complexes were measured to be 7.48 × 105 and 9.12 × 105 M-1, respectively, indicating a strong association between both probes and their respective metal ions. Both chemosensors exhibited comparable limits of detection (LOD) and limits of quantification (LOQ) of 0.03 μM and 0.10 μM, respectively. Reversible studies confirmed that only chemosensor 3CQD could serve as a secondary sensor for EDTA. The theoretical studies calculated using Density Functional Theory (DFT) program at B3LYP/6-31G** (Spartan '10 package) level.

Colorimetric chemosensors for the selective detection of arsenite over arsenate anions in aqueous medium: Application in environmental water samples and DFT studies

Novel organic receptors N3R1- N3R3 were developed for the selective colorimetric recognition of arsenite ions in the organo-aqueous media. In the 50% aq. acetonitrile media and 70% aq. DMSO media, receptors N3R2 and N3R3 showed specific sensitivity and selectivity towards arsenite anions over arsenate anions. Receptor N3R1 showed discriminating recognition of arsenite in the 40% aq. DMSO medium. All three receptors formed a 1:1 complex with arsenite and stable for a pH range of 6-12. The receptors N3R2 and N3R3 achieved a detection limit of 0.008 ppm (8 ppb) and 0.0246 ppm, respectively, for arsenite. Initial hydrogen bonding on binding with the arsenite followed by the deprotonation mechanism was well supported by the UV-Vis titration, ¹H- NMR titration, electrochemical studies, and the DFT studies. Colorimetric test strips were fabricated using N3R1- N3R3 for the on-site detection of arsenite anion. The receptors are also employed for sensing arsenite ions in various environmental water samples with high accuracy.

A colorimetric and turn-on fluorescent sensor for cyanide and acetate-based Schiff base compound of 2,2'-((1E,11E)-5,8-dioxa-2,11-diazadodeca-1,11-diene-1,12-diyl)bis(4-((E)-phenyldiazenyl)phenol)

A novel Schiff base-based sensor (L) has been designed, synthesized, and developed as a fluorescent and colorimetric sensor for cyanide and acetate. This L exhibited a quick response with rapid sensitivity to CN^- and AcO^- through a remarkable color change from yellow to red which was detectable by the naked eyes. It also sensed CN^- and AcO^- in a fluorescent way via an enhancement in fluorescence intensity. The interaction between L and anions (CN^- and AcO^-) was investigated by using UV-Vis studies, and ¹H NMR titration. The theoretical DFT calculations were also employed to support the results, which displayed good agreement with the experimental value acquisition. As the detection limit for cyanide and acetate were 2.1 × 10^-9 M and 1.7 × 10^-9 M; respectively, low concentrations of these anions could be detectable in the proposed L sensor. In addition, L showed significant reversibility of CN^- detection by using Cu²⁺ as a proper reagent with two different sensing methods including color change and UV-Vis. Last but not least, L could be applied to rapidly detect CN^- in a wide range of pH. As a result, the proposed sensor is promising to identify cyanide and acetate in practical applications in medical, biological, and chemical fields.

A Coumarin-azo Derived Colorimetric Chemosensor for Hg2+ Detection in Organic and Aqueous Media and its Extended Real-world Applications

Pollution caused by the release of toxic heavy metals into the environment by industrial and farming processes has been regarded as a major problem worldwide. This has attracted a great deal of attention into restoration and remediation. Mercury is classified as a toxic heavy metal which has posed significant challenges to public and environmental health. To date, conventional methods for mercury detection rely on expensive, destructive, complex, and highly specialized methods. Evidently, there is a need to develop systems capable of easily identifying and quantifying mercury within the environment. In this way, organic-based colorimetric chemosensors are gaining increasing popularity due to their high sensitivity, selectivity, cost-effectiveness, ease of design, naked-eye, and on-site detection ability. The formation of coumarin-azo derivative AD1 was carried out by a conventional diazotization reaction with coumarin-amine 1c and N,N-dimethylaniline. Sensor AD1 displayed remarkable visual colour change upon mercury addition with appreciable selectivity and sensitivity. The detection limit was calculated as 0.24 µM. Additionally, the reversible nature of AD1 allowed for the construction of an IMPLICATION type logic gate and Molecular Keypad Lock. Chemosensor AD1 displayed further sensing applications in real-world water samples and towards on-site assay methods. Herein, we describe a coumarin-derived chemosensor bearing an azo (N = N) functionality for the colorimetric and quantitative determination of Hg²⁺ in organic and aqueous media.

A simple colorimetric and fluorometric probe for rapid detection of CN- with large emission shift

In this work, a novel probe R was synthesized via Knoevenagel reaction between 3H-benzo[f]chromium-2-formaldehyde and ethyl cyanoacetate for selective detection of CN^- in both colorimetric and fluorescent signal channels. The recognition of CN^- was through the nucleophilic reaction of CN^- to C = C of probe R, which destroys π-conjugation and blocks the ICT effect of the probe, resulting in colorimetric and fluorometric responses. Probe R showed great sensitivity toward CN^-, with large fluorescent emission (595 nm) and low detection limit (0.70 μM). Moreover, probe R can detect exogenous CN^- in living cells.

A Benzothidiazole-Based Reversible Fluorescent Probe with Excellent Performances in Selectively and Sensitively Sensing of Hg2+ in Water

The development of mercury ion selective fluorescent probe is significant because it is one of toxic heavy metals and poses great risks and hazards to human health. Herein, we develop a mercury ion-selective fluorescent probe, namely IB, based on imidazole decorated benzothiadiazole that obtained by a facile palladium catalytic C-N coupling reaction. IB exhibits high selectivity and sensitivity towards mercury ion in water with nearly 32-fold fluorescent enhancement. The detection limit is calculated to be 0.93 nmol/L. In addition, the sensing of mercury ion can be conducted in a wide pH scope ranging from 4.0 to 10.0. Subsequently, the mercury ion elicits fluorescence of IB solution can be quenched by the addition of cyanide anions, showing "off-on-off" fluorescence transformation with at least 5 cycles, demonstrating the reversible sensing ability of IB. Furthermore, an INHIBIT logical detector has been developed using mercury ion and cyanide anions as inputs and fluorescence of IB as output. Significantly, IB can be utilized for mercury ion detection in real water sample.

Naked-eye colorimetric and turn-on fluorescent Schiff base sensor for cyanide and aluminum (III) detection in food samples and cell imaging applications

A new efficient Schiff base sensor SB3 for fluorescent and colorimetric "naked-eye" "turn-on" sensing of cyanide anion (CN^-) with excellent sensitivity and selectivity was developed. The 4,4'-(perfluoropropane-2,2-diyl)bisphenol group and two phenyl groups were covalently linked by two C = N bonds to extend the conjugation length. The four hydroxyl groups can improve the water solubility of the SB3 sensor. The SB3 sensor exhibited high specificity towards CN^- by interrupting its intramolecular charge transfer, resulting in a color change and remarkable "turn-on" green fluorescence emission. The sensing mechanism is caused by the nucleophilic addition of CN- toward imine groups of the SB3 sensor, leading to breaks of the conjugation, fluorescent spectral changes, and color change. It was confirmed by ¹H NMR titration and Mass spectra. The detection limits for CN^- and Al³⁺obtained by fluorescence spectrum are 0.80 µM and 0.25 µM, respectively. The SB3 sensor can act as an efficient chemical sensor for detecting the CN^- and Al³⁺ ions under common environmental and physiological conditions (pH 5-12). Besides, the sensor can also detect CN^- in food materials (such as sprouting potatoes and cassava flour) and imaging CN^-in living cells with strong "turn-on" fluorescence at 490 nm. SB3 is an excellent CN^- sensor that exhibits some advantages, including easy synthesis, distinct fluorescence and color change, high selectivity, low detection limit, and good anti-interference ability to analyze solution and food samples, together with fluorescence cell imaging.

Pyridine Scaffolds, Phenols and Derivatives of Azo Moiety: Current Therapeutic Perspectives

Synthetic heterocyclic compounds have incredible potential against different diseases; pyridines, phenolic compounds and the derivatives of azo moiety have shown excellent antimicrobial, antiviral, antidiabetic, anti-melanogenic, anti-ulcer, anticancer, anti-mycobacterial, anti-inflammatory, DNA binding and chemosensing activities. In the present review, the above-mentioned activities of the nitrogen-containing heterocyclic compounds (pyridines), hydroxyl (phenols) and azo derivatives are discussed with reference to the minimum inhibitory concentration and structure–activity relationship, which clearly indicate that the presence of nitrogen in the phenyl ring; in addition, the hydroxyl substituent and the incorporation of a diazo group is crucial for the improved efficacies of the compounds in probing different diseases. The comparison was made with the reported drugs and new synthetic derivatives that showed recent therapeutic perspectives made in the last five years.

Design and synthesis of a new tripod-chromogenic sensor based on a s-triazine and thiazolidine-2,4-dione ring (TCST) for naked-eye detection of Li+

A novel tripod-chromogenic sensor based on a s-triazine and thiazolidine-2,4-dione ring (TCST) was designed, synthesized, and applied as a colorimetric probe in aqueous solutions of dimethyl sulfoxide (DMSO). The probe showed a highly sensitive and selective colorimetric sensor for naked-eye detection of Li+, changing from colourless to yellow. The probe’s detection limit toward Li+ was found to be 1.2 μM. The result of the Job plot analysis showed 1:1 stoichiometry for the interaction between the tripod chemosensor and Li+ and this result was confirmed by 1H NMR titration experiments. The probe can also be used for biological activities depending on the results of microbial tests.

Mercury Toxicity and Detection Using Chromo-Fluorogenic Chemosensors

Mercury (Hg), this non-essential heavy metal released from both industrial and natural sources entered into living bodies, and cause grievous detrimental effects to the human health and ecosystem. The monitoring of Hg2+ excessive accumulation can be beneficial to fight against the risk associated with mercury toxicity to living systems. Therefore, there is an emergent need of novel and facile analytical approaches for the monitoring of mercury levels in various environmental, industrial, and biological samples. The chromo-fluorogenic chemosensors possess the attractive analytical parameters of low-cost, enhanced detection ability with high sensitivity, simplicity, rapid on-site monitoring ability, etc. This review was narrated to summarize the mercuric ion selective chromo-fluorogenic chemosensors reported in the year 2020. The design of sensors, mechanisms, fluorophores used, analytical performance, etc. are summarized and discussed.

A dual colorimetric chemosensor for Hg(ii) and cyanide ions in aqueous media based on a nitrobenzoxadiazole (NBD)-antipyrine conjugate with INHIBIT logic gate behaviour

In this work, we have synthesized nitrobenzoxadiazole-antipyrine conjugate 1 from chloro substituted nitrobenzoxadiazole (NBD) with 4-aminoantipyrine by an elegant method which provides good yield and it is characterized by various spectroscopic techniques. The sensing ability of compound 1 is analyzed with the addition of different metal ions and anions in an aqueous methanol medium. It shows rapid colorimetric response for Hg²⁺ and CN^- ions over a wide range of competitive metal ions and anions. On addition of Hg²⁺/CN^- ions, 1 shows a distinct color change from pale yellow to pink and orange red, respectively, thus permitting chemosensor 1 to be used for 'naked eye' detection of Hg²⁺ and CN^- ions. The change in spectral features and color of 1 with the addition of Hg²⁺ and CN^- ions is mainly due to the formation of a charge-transfer complex (1₂-Hg²⁺) and cyanide ion induced deprotonation of 1. The interaction between the Hg²⁺/CN^- ion and 1 is characterized by mass spectrometry and ¹H-NMR spectral titrations. In addition, sensor 1 is reversible and reusable and it can be developed as an INHIBIT type logic gate. Compound 1 detects Hg²⁺ and CN^- ions upto 2.57 × 10^-8 M and 1.67 × 10^-7 M, respectively. Further, compound 1 pre-coated test strips detect Hg²⁺ and CN^- ions and they provide a simple and convenient method for determination of Hg²⁺/CN^- ions.

Theoretical insights into a colorimetric azo-based probe to detect copper ions

In the present study, a colorimetric azobenzene-based probe (AZO 1) was reported that exhibits high selectivity toward Cu²⁺ and undergoes a red to yellow colour change upon its detection. Density functional theory (DFT) calculations were carried out to investigate the mechanism of the probe discoloration. The differences in the binding energies of complexes of 2 : 1 and 1 : 1 stoichiometry indicated that a two-step complexation process takes place as the Cu²⁺ content increases. However, the calculated absorption spectra suggested that a significant colour change would only be observed for the 1 : 1 AZO 1 : Cu²⁺ complex. A HOMO–LUMO electronic transition was a key factor for the blue shift of the absorption bands of the probe. Further studies indicated that solvent molecules participate in the complexation and that the presence of the o-methoxy group in AZO 1 led to formation of an octahedral complex because of the additional chelating site. A significant change in the conformation of AZO 1, namely the rotation of the N,N-di(carboxymethyl)amino group around the N–C_Ar bond by approximately 90°, resulted in a larger HOMO–LUMO energy gap, and the corresponding alteration of the intramolecular charge transfer (ICT) from the N,N-di(carboxymethyl)amino group to the phenyl ring led to the observed colour change.

DFT calculations indicated that the rotation of the N,N-di(carboxymethyl)amino group around the N–CAr bond by approximately 90°, resulted in a larger HOMO–LUMO energy gap, and led to the observed colour change.